W↓
All docs
🔑
Sign Up/Sign In
ffmpeg.org/ffmpeg-all.html
Public Link
Apr 8, 2025, 1:02:25 PM - complete - 1.6 MB
Starting URLs:
https://ffmpeg.org/ffmpeg-all.html
Max Pages:
1
## Page: https://ffmpeg.org/ffmpeg-all.html ## Table of Contents * 1 Synopsis * 2 Description * 3 Detailed description * 3.1 Streamcopy * 3.2 Trancoding * 3.3 Filtering * 3.3.1 Simple filtergraphs * 3.3.2 Complex filtergraphs * 3.4 Loopback decoders * 4 Stream selection * 4.1 Description * 4.1.1 Automatic stream selection * 4.1.2 Manual stream selection * 4.1.3 Complex filtergraphs * 4.1.4 Stream handling * 4.2 Examples * 5 Options * 5.1 Stream specifiers * 5.2 Generic options * 5.3 AVOptions * 5.4 Main options * 5.5 Video Options * 5.6 Advanced Video options * 5.7 Audio Options * 5.8 Advanced Audio options * 5.9 Subtitle options * 5.10 Advanced Subtitle options * 5.11 Advanced options * 5.12 Preset files * 5.12.1 ffpreset files * 5.12.2 avpreset files * 5.13 vstats file format * 6 Examples * 6.1 Video and Audio grabbing * 6.2 X11 grabbing * 6.3 Video and Audio file format conversion * 7 Syntax * 7.1 Quoting and escaping * 7.1.1 Examples * 7.2 Date * 7.3 Time duration * 7.3.1 Examples * 7.4 Video size * 7.5 Video rate * 7.6 Ratio * 7.7 Color * 7.8 Channel Layout * 8 Expression Evaluation * 9 Codec Options * 10 Decoders * 11 Video Decoders * 11.1 av1 * 11.1.1 Options * 11.2 hevc * 11.2.1 Options * 11.3 rawvideo * 11.3.1 Options * 11.4 libdav1d * 11.4.1 Options * 11.5 libdavs2 * 11.6 libuavs3d * 11.6.1 Options * 11.7 libxevd * 11.7.1 Options * 11.8 QSV Decoders * 11.8.1 Common Options * 11.8.2 HEVC Options * 11.9 v210 * 11.9.1 Options * 12 Audio Decoders * 12.1 ac3 * 12.1.1 AC-3 Decoder Options * 12.2 flac * 12.2.1 FLAC Decoder options * 12.3 ffwavesynth * 12.4 libcelt * 12.5 libgsm * 12.6 libilbc * 12.6.1 Options * 12.7 libopencore-amrnb * 12.8 libopencore-amrwb * 12.9 libopus * 13 Subtitles Decoders * 13.1 libaribb24 * 13.1.1 libaribb24 Decoder Options * 13.2 libaribcaption * 13.2.1 libaribcaption Decoder Options * 13.2.2 libaribcaption decoder usage examples * 13.3 dvbsub * 13.3.1 Options * 13.4 dvdsub * 13.4.1 Options * 13.5 libzvbi-teletext * 13.5.1 Options * 14 Encoders * 15 Audio Encoders * 15.1 aac * 15.1.1 Options * 15.2 ac3 and ac3\_fixed * 15.2.1 AC-3 Metadata * 15.2.1.1 Metadata Control Options * 15.2.1.2 Downmix Levels * 15.2.1.3 Audio Production Information * 15.2.1.4 Other Metadata Options * 15.2.2 Extended Bitstream Information * 15.2.2.1 Extended Bitstream Information - Part 1 * 15.2.2.2 Extended Bitstream Information - Part 2 * 15.2.3 Other AC-3 Encoding Options * 15.2.4 Floating-Point-Only AC-3 Encoding Options * 15.3 flac * 15.3.1 Options * 15.4 opus * 15.4.1 Options * 15.5 libfdk\_aac * 15.5.1 Options * 15.5.2 Examples * 15.6 liblc3 * 15.6.1 Options * 15.7 libmp3lame * 15.7.1 Options * 15.8 libopencore-amrnb * 15.8.1 Options * 15.9 libopus * 15.9.1 Option Mapping * 15.10 libshine * 15.10.1 Options * 15.11 libtwolame * 15.11.1 Options * 15.12 libvo-amrwbenc * 15.12.1 Options * 15.13 libvorbis * 15.13.1 Options * 15.14 mjpeg * 15.14.1 Options * 15.15 wavpack * 15.15.1 Options * 15.15.1.1 Shared options * 15.15.1.2 Private options * 16 Video Encoders * 16.1 a64\_multi, a64\_multi5 * 16.2 Cinepak * 16.2.1 Options * 16.3 ffv1 * 16.3.1 Options * 16.4 GIF * 16.4.1 Options * 16.5 Hap * 16.5.1 Options * 16.6 jpeg2000 * 16.6.1 Options * 16.7 librav1e * 16.7.1 Options * 16.8 libaom-av1 * 16.8.1 Options * 16.9 libsvtav1 * 16.9.1 Options * 16.10 libjxl * 16.10.1 Options * 16.11 libkvazaar * 16.11.1 Options * 16.12 libopenh264 * 16.12.1 Options * 16.13 libtheora * 16.13.1 Options * 16.13.2 Examples * 16.14 libvpx * 16.14.1 Options * 16.15 libvvenc * 16.15.1 Supported Pixel Formats * 16.15.2 Options * 16.16 libwebp * 16.16.1 Pixel Format * 16.16.2 Options * 16.17 libx264, libx264rgb * 16.17.1 Supported Pixel Formats * 16.17.2 Options * 16.18 libx265 * 16.18.1 Options * 16.19 libxavs2 * 16.19.1 Options * 16.20 libxeve * 16.20.1 Options * 16.21 libxvid * 16.21.1 Options * 16.22 MediaFoundation * 16.23 Microsoft RLE * 16.23.1 Options * 16.24 mpeg2 * 16.24.1 Options * 16.25 png * 16.25.1 Private options * 16.26 ProRes * 16.26.1 Private Options for prores-ks * 16.26.2 Speed considerations * 16.27 QSV Encoders * 16.27.1 Ratecontrol Method * 16.27.2 Global Options -> MSDK Options * 16.27.3 Common Options * 16.27.4 Runtime Options * 16.27.5 H264 options * 16.27.6 HEVC Options * 16.27.7 MPEG2 Options * 16.27.8 VP9 Options * 16.27.9 AV1 Options * 16.28 snow * 16.28.1 Options * 16.29 VAAPI encoders * 16.30 vbn * 16.30.1 Options * 16.31 vc2 * 16.31.1 Options * 17 Subtitles Encoders * 17.1 dvdsub * 17.1.1 Options * 18 Bitstream Filters * 18.1 aac\_adtstoasc * 18.2 av1\_metadata * 18.3 chomp * 18.4 dca\_core * 18.5 dovi\_rpu * 18.6 dump\_extra * 18.7 dv\_error\_marker * 18.8 eac3\_core * 18.9 extract\_extradata * 18.10 filter\_units * 18.11 hapqa\_extract * 18.12 h264\_metadata * 18.13 h264\_mp4toannexb * 18.14 h264\_redundant\_pps * 18.15 hevc\_metadata * 18.16 hevc\_mp4toannexb * 18.17 imxdump * 18.18 mjpeg2jpeg * 18.19 mjpegadump * 18.20 mov2textsub * 18.21 mpeg2\_metadata * 18.22 mpeg4\_unpack\_bframes * 18.23 noise * 18.23.1 Examples * 18.24 null * 18.25 pcm\_rechunk * 18.26 pgs\_frame\_merge * 18.27 prores\_metadata * 18.28 remove\_extra * 18.29 setts * 18.30 showinfo * 18.31 text2movsub * 18.32 trace\_headers * 18.33 truehd\_core * 18.34 vp9\_metadata * 18.35 vp9\_superframe * 18.36 vp9\_superframe\_split * 18.37 vp9\_raw\_reorder * 19 Format Options * 19.1 Format stream specifiers * 20 Demuxers * 20.1 aa * 20.2 aac * 20.3 apng * 20.4 asf * 20.5 concat * 20.5.1 Syntax * 20.5.2 Options * 20.5.3 Examples * 20.6 dash * 20.6.1 Options * 20.7 dvdvideo * 20.7.1 Background * 20.7.2 Options * 20.7.3 Examples * 20.8 ea * 20.8.1 Options * 20.9 imf * 20.10 flv, live\_flv, kux * 20.11 gif * 20.12 hls * 20.13 image2 * 20.13.1 Examples * 20.14 libgme * 20.15 libmodplug * 20.16 libopenmpt * 20.17 mov/mp4/3gp * 20.17.1 Options * 20.17.2 Audible AAX * 20.18 mpegts * 20.19 mpjpeg * 20.20 rawvideo * 20.21 rcwt * 20.21.1 Examples * 20.22 sbg * 20.23 tedcaptions * 20.24 vapoursynth * 20.25 w64 * 20.26 wav * 21 Muxers * 21.1 Raw muxers * 21.1.1 Examples * 21.2 Raw PCM muxers * 21.3 MPEG-1/MPEG-2 program stream muxers * 21.3.1 Options * 21.4 MOV/MPEG-4/ISOMBFF muxers * 21.4.1 Fragmentation * 21.4.2 Options * 21.4.3 Examples * 21.5 a64 * 21.6 ac4 * 21.6.1 Options * 21.7 adts * 21.7.1 Options * 21.8 aea * 21.9 aiff * 21.9.1 Options * 21.10 alp * 21.10.1 Options * 21.11 amr * 21.12 amv * 21.13 apm * 21.14 apng * 21.14.1 Options * 21.14.2 Examples * 21.15 argo\_asf * 21.15.1 Options * 21.16 argo\_cvg * 21.16.1 Options * 21.17 asf, asf\_stream * 21.17.1 Options * 21.18 ass * 21.18.1 Options * 21.19 ast * 21.19.1 Options * 21.20 au * 21.21 avi * 21.21.1 Options * 21.22 avif * 21.22.1 Options * 21.23 avm2 * 21.24 bit * 21.25 caf * 21.26 codec2 * 21.27 chromaprint * 21.27.1 Options * 21.28 crc * 21.28.1 Examples * 21.29 dash * 21.29.1 Options * 21.29.2 Example * 21.30 daud * 21.30.1 Example * 21.31 dv * 21.31.1 Example * 21.32 ffmetadata * 21.32.1 Example * 21.33 fifo * 21.33.1 Options * 21.33.2 Example * 21.34 film\_cpk * 21.35 filmstrip * 21.36 fits * 21.37 flac * 21.37.1 Options * 21.37.2 Example * 21.38 flv * 21.38.1 Options * 21.39 framecrc * 21.39.1 Examples * 21.40 framehash * 21.40.1 Examples * 21.41 framemd5 * 21.41.1 Examples * 21.42 gif * 21.42.1 Options * 21.42.2 Example * 21.43 gxf * 21.44 hash * 21.44.1 Examples * 21.45 hds * 21.45.1 Options * 21.45.2 Example * 21.46 hls * 21.46.1 Options * 21.47 iamf * 21.48 ico * 21.49 ilbc * 21.50 image2, image2pipe * 21.50.1 Options * 21.50.2 Examples * 21.51 ircam * 21.52 ivf * 21.53 jacosub * 21.54 kvag * 21.55 lc3 * 21.56 lrc * 21.56.1 Metadata * 21.57 matroska * 21.57.1 Metadata * 21.57.2 Options * 21.58 md5 * 21.58.1 Examples * 21.59 microdvd * 21.60 mmf * 21.61 mp3 * 21.62 mpegts * 21.62.1 Options * 21.62.2 Example * 21.63 mxf, mxf\_d10, mxf\_opatom * 21.63.1 Options * 21.64 null * 21.65 nut * 21.66 ogg * 21.67 rcwt * 21.67.1 Examples * 21.68 segment, stream\_segment, ssegment * 21.68.1 Options * 21.68.2 Examples * 21.69 smoothstreaming * 21.70 streamhash * 21.70.1 Examples * 21.71 tee * 21.71.1 Options * 21.71.2 Examples * 21.72 webm\_chunk * 21.72.1 Options * 21.72.2 Example * 21.73 webm\_dash\_manifest * 21.73.1 Options * 21.73.2 Example * 22 Metadata * 23 Protocol Options * 24 Protocols * 24.1 amqp * 24.2 async * 24.3 bluray * 24.4 cache * 24.5 concat * 24.6 concatf * 24.7 crypto * 24.8 data * 24.9 fd * 24.10 file * 24.11 ftp * 24.12 gopher * 24.13 gophers * 24.14 hls * 24.15 http * 24.15.1 HTTP Cookies * 24.16 Icecast * 24.17 ipfs * 24.18 mmst * 24.19 mmsh * 24.20 md5 * 24.21 pipe * 24.22 prompeg * 24.23 rist * 24.24 rtmp * 24.25 rtmpe * 24.26 rtmps * 24.27 rtmpt * 24.28 rtmpte * 24.29 rtmpts * 24.30 libsmbclient * 24.31 libssh * 24.32 librtmp rtmp, rtmpe, rtmps, rtmpt, rtmpte * 24.33 rtp * 24.34 rtsp * 24.34.1 Muxer * 24.34.2 Demuxer * 24.34.3 Examples * 24.35 sap * 24.35.1 Muxer * 24.35.2 Demuxer * 24.36 sctp * 24.37 srt * 24.38 srtp * 24.39 subfile * 24.40 tee * 24.41 tcp * 24.42 tls * 24.43 udp * 24.43.1 Examples * 24.44 unix * 24.45 zmq * 25 Device Options * 26 Input Devices * 26.1 alsa * 26.1.1 Options * 26.2 android\_camera * 26.2.1 Options * 26.3 avfoundation * 26.3.1 Options * 26.3.2 Examples * 26.4 decklink * 26.4.1 Options * 26.4.2 Examples * 26.5 dshow * 26.5.1 Options * 26.5.2 Examples * 26.6 fbdev * 26.6.1 Options * 26.7 gdigrab * 26.7.1 Options * 26.8 iec61883 * 26.8.1 Options * 26.8.2 Examples * 26.9 jack * 26.9.1 Options * 26.10 kmsgrab * 26.10.1 Options * 26.10.2 Examples * 26.11 lavfi * 26.11.1 Options * 26.11.2 Examples * 26.12 libcdio * 26.12.1 Options * 26.13 libdc1394 * 26.13.1 Options * 26.14 openal * 26.14.1 Options * 26.14.2 Examples * 26.15 oss * 26.15.1 Options * 26.16 pulse * 26.16.1 Options * 26.16.2 Examples * 26.17 sndio * 26.17.1 Options * 26.18 video4linux2, v4l2 * 26.18.1 Options * 26.19 vfwcap * 26.19.1 Options * 26.20 x11grab * 26.20.1 Options * 27 Output Devices * 27.1 alsa * 27.1.1 Examples * 27.2 AudioToolbox * 27.2.1 Options * 27.2.2 Examples * 27.3 caca * 27.3.1 Options * 27.3.2 Examples * 27.4 decklink * 27.4.1 Options * 27.4.2 Examples * 27.5 fbdev * 27.5.1 Options * 27.5.2 Examples * 27.6 oss * 27.7 pulse * 27.7.1 Options * 27.7.2 Examples * 27.8 sndio * 27.9 v4l2 * 27.10 xv * 27.10.1 Options * 27.10.2 Examples * 28 Resampler Options * 29 Scaler Options * 30 Filtering Introduction * 31 graph2dot * 32 Filtergraph description * 32.1 Filtergraph syntax * 32.2 Notes on filtergraph escaping * 33 Timeline editing * 34 Changing options at runtime with a command * 35 Options for filters with several inputs (framesync) * 36 Audio Filters * 36.1 aap * 36.2 acompressor * 36.2.1 Commands * 36.3 acontrast * 36.4 acopy * 36.5 acrossfade * 36.5.1 Examples * 36.6 acrossover * 36.6.1 Examples * 36.7 acrusher * 36.7.1 Commands * 36.8 acue * 36.9 adeclick * 36.10 adeclip * 36.11 adecorrelate * 36.12 adelay * 36.12.1 Examples * 36.13 adenorm * 36.13.1 Commands * 36.14 aderivative, aintegral * 36.15 adrc * 36.15.1 Commands * 36.15.2 Examples * 36.16 adynamicequalizer * 36.16.1 Commands * 36.17 adynamicsmooth * 36.17.1 Commands * 36.18 aecho * 36.18.1 Examples * 36.19 aemphasis * 36.19.1 Commands * 36.20 aeval * 36.20.1 Examples * 36.21 aexciter * 36.21.1 Commands * 36.22 afade * 36.22.1 Commands * 36.22.2 Examples * 36.23 afftdn * 36.23.1 Commands * 36.23.2 Examples * 36.24 afftfilt * 36.24.1 Examples * 36.25 afir * 36.25.1 Examples * 36.26 aformat * 36.27 afreqshift * 36.27.1 Commands * 36.28 afwtdn * 36.28.1 Commands * 36.29 agate * 36.29.1 Commands * 36.30 aiir * 36.30.1 Examples * 36.31 alimiter * 36.32 allpass * 36.32.1 Commands * 36.33 aloop * 36.34 amerge * 36.34.1 Examples * 36.35 amix * 36.35.1 Examples * 36.35.2 Commands * 36.36 amultiply * 36.37 anequalizer * 36.37.1 Examples * 36.37.2 Commands * 36.38 anlmdn * 36.38.1 Commands * 36.39 anlmf, anlms * 36.39.1 Examples * 36.39.2 Commands * 36.40 anull * 36.41 apad * 36.41.1 Examples * 36.42 aphaser * 36.43 aphaseshift * 36.43.1 Commands * 36.44 apsnr * 36.45 apsyclip * 36.45.1 Commands * 36.46 apulsator * 36.47 aresample * 36.47.1 Examples * 36.48 areverse * 36.48.1 Examples * 36.49 arls * 36.50 arnndn * 36.50.1 Commands * 36.51 asdr * 36.52 asetnsamples * 36.53 asetrate * 36.54 ashowinfo * 36.55 asisdr * 36.56 asoftclip * 36.56.1 Commands * 36.57 aspectralstats * 36.58 asr * 36.59 astats * 36.60 asubboost * 36.60.1 Commands * 36.61 asubcut * 36.61.1 Commands * 36.62 asupercut * 36.62.1 Commands * 36.63 asuperpass * 36.63.1 Commands * 36.64 asuperstop * 36.64.1 Commands * 36.65 atempo * 36.65.1 Examples * 36.65.2 Commands * 36.66 atilt * 36.66.1 Commands * 36.67 atrim * 36.68 axcorrelate * 36.68.1 Examples * 36.69 bandpass * 36.69.1 Commands * 36.70 bandreject * 36.70.1 Commands * 36.71 bass, lowshelf * 36.71.1 Commands * 36.72 biquad * 36.72.1 Commands * 36.73 bs2b * 36.74 channelmap * 36.74.1 Examples * 36.75 channelsplit * 36.75.1 Examples * 36.76 chorus * 36.76.1 Examples * 36.77 compand * 36.77.1 Examples * 36.78 compensationdelay * 36.78.1 Commands * 36.79 crossfeed * 36.79.1 Commands * 36.80 crystalizer * 36.80.1 Commands * 36.81 dcshift * 36.82 deesser * 36.83 dialoguenhance * 36.83.1 Commands * 36.84 drmeter * 36.85 dynaudnorm * 36.85.1 Commands * 36.86 earwax * 36.87 equalizer * 36.87.1 Examples * 36.87.2 Commands * 36.88 extrastereo * 36.88.1 Commands * 36.89 firequalizer * 36.89.1 Examples * 36.90 flanger * 36.91 haas * 36.92 hdcd * 36.93 headphone * 36.93.1 Examples * 36.94 highpass * 36.94.1 Commands * 36.95 join * 36.96 ladspa * 36.96.1 Examples * 36.96.2 Commands * 36.97 loudnorm * 36.98 lowpass * 36.98.1 Examples * 36.98.2 Commands * 36.99 lv2 * 36.99.1 Examples * 36.99.2 Commands * 36.100 mcompand * 36.101 pan * 36.101.1 Mixing examples * 36.101.2 Remapping examples * 36.102 replaygain * 36.103 resample * 36.104 rubberband * 36.104.1 Commands * 36.105 sidechaincompress * 36.105.1 Commands * 36.105.2 Examples * 36.106 sidechaingate * 36.106.1 Commands * 36.107 silencedetect * 36.107.1 Examples * 36.108 silenceremove * 36.108.1 Examples * 36.108.2 Commands * 36.109 sofalizer * 36.109.1 Examples * 36.110 speechnorm * 36.110.1 Commands * 36.110.2 Examples * 36.111 stereotools * 36.111.1 Commands * 36.111.2 Examples * 36.112 stereowiden * 36.112.1 Commands * 36.113 superequalizer * 36.114 surround * 36.115 tiltshelf * 36.115.1 Commands * 36.116 treble, highshelf * 36.116.1 Commands * 36.117 tremolo * 36.118 vibrato * 36.119 virtualbass * 36.120 volume * 36.120.1 Commands * 36.120.2 Examples * 36.121 volumedetect * 36.121.1 Examples * 37 Audio Sources * 37.1 abuffer * 37.1.1 Examples * 37.2 aevalsrc * 37.2.1 Examples * 37.3 afdelaysrc * 37.4 afireqsrc * 37.5 afirsrc * 37.6 anullsrc * 37.6.1 Examples * 37.7 flite * 37.7.1 Examples * 37.8 anoisesrc * 37.8.1 Examples * 37.9 hilbert * 37.10 sinc * 37.11 sine * 37.11.1 Examples * 38 Audio Sinks * 38.1 abuffersink * 38.2 anullsink * 39 Video Filters * 39.1 addroi * 39.1.1 Examples * 39.2 alphaextract * 39.3 alphamerge * 39.4 amplify * 39.4.1 Commands * 39.5 ass * 39.6 atadenoise * 39.6.1 Commands * 39.7 avgblur * 39.7.1 Commands * 39.8 backgroundkey * 39.8.1 Commands * 39.9 bbox * 39.9.1 Commands * 39.10 bilateral * 39.10.1 Commands * 39.11 bitplanenoise * 39.12 blackdetect * 39.13 blackframe * 39.14 blend * 39.14.1 Examples * 39.14.2 Commands * 39.15 blockdetect * 39.15.1 Examples * 39.16 blurdetect * 39.16.1 Examples * 39.17 bm3d * 39.17.1 Examples * 39.18 boxblur * 39.18.1 Examples * 39.19 bwdif * 39.20 ccrepack * 39.21 cas * 39.21.1 Commands * 39.22 chromahold * 39.22.1 Commands * 39.23 chromakey * 39.23.1 Commands * 39.23.2 Examples * 39.24 chromanr * 39.24.1 Commands * 39.25 chromashift * 39.25.1 Commands * 39.26 ciescope * 39.27 codecview * 39.27.1 Examples * 39.28 colorbalance * 39.28.1 Examples * 39.28.2 Commands * 39.29 colorcontrast * 39.29.1 Commands * 39.30 colorcorrect * 39.30.1 Commands * 39.31 colorchannelmixer * 39.31.1 Examples * 39.31.2 Commands * 39.32 colorize * 39.32.1 Commands * 39.33 colorkey * 39.33.1 Examples * 39.33.2 Commands * 39.34 colorhold * 39.34.1 Commands * 39.35 colorlevels * 39.35.1 Examples * 39.35.2 Commands * 39.36 colormap * 39.37 colormatrix * 39.38 colorspace * 39.39 colortemperature * 39.39.1 Commands * 39.40 convolution * 39.40.1 Commands * 39.40.2 Examples * 39.41 convolve * 39.42 copy * 39.43 coreimage * 39.43.1 Examples * 39.44 corr * 39.45 cover\_rect * 39.45.1 Examples * 39.46 crop * 39.46.1 Examples * 39.46.2 Commands * 39.47 cropdetect * 39.47.1 Examples * 39.47.2 Commands * 39.48 cue * 39.49 curves * 39.49.1 Commands * 39.49.2 Examples * 39.50 datascope * 39.50.1 Commands * 39.51 dblur * 39.51.1 Commands * 39.52 dctdnoiz * 39.52.1 Examples * 39.53 deband * 39.53.1 Commands * 39.54 deblock * 39.54.1 Examples * 39.54.2 Commands * 39.55 decimate * 39.56 deconvolve * 39.57 dedot * 39.58 deflate * 39.58.1 Commands * 39.59 deflicker * 39.60 dejudder * 39.61 delogo * 39.61.1 Examples * 39.62 derain * 39.63 deshake * 39.64 despill * 39.64.1 Commands * 39.65 detelecine * 39.66 dilation * 39.66.1 Commands * 39.67 displace * 39.67.1 Examples * 39.68 dnn\_classify * 39.69 dnn\_detect * 39.70 dnn\_processing * 39.70.1 Examples * 39.71 drawbox * 39.71.1 Examples * 39.71.2 Commands * 39.72 drawgraph * 39.73 drawgrid * 39.73.1 Examples * 39.73.2 Commands * 39.74 drawtext * 39.74.1 Syntax * 39.74.2 Text expansion * 39.74.3 Commands * 39.74.4 Examples * 39.75 edgedetect * 39.75.1 Examples * 39.76 elbg * 39.77 entropy * 39.78 epx * 39.79 eq * 39.79.1 Commands * 39.80 erosion * 39.80.1 Commands * 39.81 estdif * 39.81.1 Commands * 39.82 exposure * 39.82.1 Commands * 39.83 extractplanes * 39.83.1 Examples * 39.84 fade * 39.84.1 Examples * 39.85 feedback * 39.85.1 Examples * 39.86 fftdnoiz * 39.87 fftfilt * 39.87.1 Examples * 39.88 field * 39.89 fieldhint * 39.90 fieldmatch * 39.90.1 p/c/n/u/b meaning * 39.90.1.1 p/c/n * 39.90.1.2 u/b * 39.90.2 Examples * 39.91 fieldorder * 39.92 fillborders * 39.92.1 Commands * 39.93 find\_rect * 39.93.1 Examples * 39.94 floodfill * 39.95 format * 39.95.1 Examples * 39.96 fps * 39.96.1 Examples * 39.97 framepack * 39.98 framerate * 39.99 framestep * 39.100 freezedetect * 39.101 freezeframes * 39.102 frei0r * 39.102.1 Examples * 39.102.2 Commands * 39.103 fspp * 39.104 fsync * 39.105 gblur * 39.105.1 Commands * 39.106 geq * 39.106.1 Examples * 39.107 gradfun * 39.107.1 Examples * 39.108 graphmonitor * 39.109 grayworld * 39.110 greyedge * 39.110.1 Examples * 39.111 guided * 39.111.1 Commands * 39.111.2 Examples * 39.112 haldclut * 39.112.1 Commands * 39.112.2 Workflow examples * 39.112.2.1 Hald CLUT video stream * 39.112.2.2 Hald CLUT with preview * 39.113 hflip * 39.114 histeq * 39.115 histogram * 39.115.1 Examples * 39.116 hqdn3d * 39.116.1 Commands * 39.117 hwdownload * 39.118 hwmap * 39.119 hwupload * 39.120 hwupload\_cuda * 39.121 hqx * 39.122 hstack * 39.123 hsvhold * 39.124 hsvkey * 39.125 hue * 39.125.1 Examples * 39.125.2 Commands * 39.126 huesaturation * 39.127 hysteresis * 39.128 iccdetect * 39.129 iccgen * 39.130 identity * 39.131 idet * 39.131.1 Examples * 39.132 il * 39.132.1 Commands * 39.133 inflate * 39.133.1 Commands * 39.134 interlace, interlace\_vulkan * 39.135 kerndeint * 39.135.1 Examples * 39.136 kirsch * 39.136.1 Commands * 39.137 lagfun * 39.137.1 Commands * 39.138 lenscorrection * 39.138.1 Options * 39.138.2 Commands * 39.139 lensfun * 39.139.1 Examples * 39.140 lcevc * 39.141 libplacebo * 39.141.1 Options * 39.141.1.1 Output mode * 39.141.1.2 Scaling * 39.141.1.3 Deinterlacing * 39.141.1.4 Debanding * 39.141.1.5 Color adjustment * 39.141.1.6 Peak detection * 39.141.1.7 Tone mapping * 39.141.1.8 Dithering * 39.141.1.9 Custom shaders * 39.141.1.10 Debugging / performance * 39.141.2 Commands * 39.141.3 Examples * 39.142 libvmaf * 39.142.1 Examples * 39.143 libvmaf\_cuda * 39.143.1 Examples * 39.144 limitdiff * 39.144.1 Commands * 39.145 limiter * 39.145.1 Commands * 39.146 loop * 39.146.1 Examples * 39.147 lut1d * 39.147.1 Commands * 39.148 lut3d * 39.148.1 Commands * 39.149 lumakey * 39.149.1 Commands * 39.150 lut, lutrgb, lutyuv * 39.150.1 Commands * 39.150.2 Examples * 39.151 lut2, tlut2 * 39.151.1 Commands * 39.151.2 Examples * 39.152 maskedclamp * 39.152.1 Commands * 39.153 maskedmax * 39.153.1 Commands * 39.154 maskedmerge * 39.154.1 Commands * 39.155 maskedmin * 39.155.1 Commands * 39.156 maskedthreshold * 39.156.1 Commands * 39.157 maskfun * 39.157.1 Commands * 39.158 mcdeint * 39.159 median * 39.159.1 Commands * 39.160 mergeplanes * 39.160.1 Examples * 39.161 mestimate * 39.162 midequalizer * 39.163 minterpolate * 39.164 mix * 39.164.1 Commands * 39.165 monochrome * 39.165.1 Commands * 39.166 morpho * 39.166.1 Commands * 39.167 mpdecimate * 39.168 msad * 39.169 multiply * 39.169.1 Commands * 39.170 negate * 39.170.1 Commands * 39.171 nlmeans * 39.172 nnedi * 39.172.1 Commands * 39.173 noformat * 39.173.1 Examples * 39.174 noise * 39.174.1 Examples * 39.175 normalize * 39.175.1 Commands * 39.175.2 Examples * 39.176 null * 39.177 ocr * 39.178 ocv * 39.178.1 dilate * 39.178.2 erode * 39.178.3 smooth * 39.179 oscilloscope * 39.179.1 Commands * 39.179.2 Examples * 39.180 overlay * 39.180.1 Commands * 39.180.2 Examples * 39.181 owdenoise * 39.182 pad * 39.182.1 Examples * 39.183 palettegen * 39.183.1 Examples * 39.184 paletteuse * 39.184.1 Examples * 39.185 perspective * 39.186 phase * 39.186.1 Commands * 39.187 photosensitivity * 39.188 pixdesctest * 39.189 pixelize * 39.189.1 Commands * 39.190 pixscope * 39.190.1 Commands * 39.191 pp * 39.191.1 Examples * 39.192 pp7 * 39.193 premultiply * 39.194 prewitt * 39.194.1 Commands * 39.195 pseudocolor * 39.195.1 Commands * 39.195.2 Examples * 39.196 psnr * 39.196.1 Examples * 39.197 pullup * 39.198 qp * 39.198.1 Examples * 39.199 qrencode * 39.199.1 qrencode Expressions * 39.199.2 qrencode Text expansion * 39.199.3 Examples * 39.200 quirc * 39.201 random * 39.202 readeia608 * 39.202.1 Commands * 39.202.2 Examples * 39.203 readvitc * 39.203.1 Examples * 39.204 remap * 39.205 removegrain * 39.206 removelogo * 39.207 repeatfields * 39.208 reverse * 39.208.1 Examples * 39.209 rgbashift * 39.209.1 Commands * 39.210 roberts * 39.210.1 Commands * 39.211 rotate * 39.211.1 Examples * 39.211.2 Commands * 39.212 sab * 39.213 scale * 39.213.1 Options * 39.213.2 Examples * 39.213.3 Commands * 39.214 scale\_vt * 39.215 scharr * 39.215.1 Commands * 39.216 scroll * 39.216.1 Commands * 39.217 scdet * 39.218 selectivecolor * 39.218.1 Examples * 39.219 separatefields * 39.220 setdar, setsar * 39.220.1 Examples * 39.221 setfield * 39.222 setparams * 39.223 shear * 39.223.1 Commands * 39.224 showinfo * 39.225 showpalette * 39.226 shuffleframes * 39.226.1 Examples * 39.227 shufflepixels * 39.228 shuffleplanes * 39.228.1 Examples * 39.229 signalstats * 39.229.1 Examples * 39.230 signature * 39.230.1 Examples * 39.231 siti * 39.231.1 Examples * 39.232 smartblur * 39.233 sobel * 39.233.1 Commands * 39.234 spp * 39.234.1 Commands * 39.235 sr * 39.236 sr\_amf * 39.236.1 Examples * 39.237 ssim * 39.237.1 Examples * 39.238 stereo3d * 39.238.1 Examples * 39.239 streamselect, astreamselect * 39.239.1 Commands * 39.239.2 Examples * 39.240 subtitles * 39.241 super2xsai * 39.242 swaprect * 39.242.1 Commands * 39.243 swapuv * 39.244 tblend * 39.245 telecine * 39.246 thistogram * 39.247 threshold * 39.247.1 Commands * 39.247.2 Examples * 39.248 thumbnail * 39.248.1 Examples * 39.249 tile * 39.249.1 Examples * 39.250 tiltandshift * 39.251 tinterlace * 39.252 tmedian * 39.252.1 Commands * 39.253 tmidequalizer * 39.254 tmix * 39.254.1 Examples * 39.254.2 Commands * 39.255 tonemap * 39.255.1 Options * 39.256 tpad * 39.257 transpose * 39.258 trim * 39.259 unpremultiply * 39.260 unsharp * 39.260.1 Examples * 39.261 untile * 39.261.1 Examples * 39.262 uspp * 39.263 v360 * 39.263.1 Examples * 39.263.2 Commands * 39.264 vaguedenoiser * 39.265 varblur * 39.265.1 Commands * 39.266 vectorscope * 39.267 vidstabdetect * 39.267.1 Examples * 39.268 vidstabtransform * 39.268.1 Options * 39.268.2 Examples * 39.269 vflip * 39.270 vfrdet * 39.271 vibrance * 39.271.1 Commands * 39.272 vif * 39.273 vignette * 39.273.1 Expressions * 39.273.2 Examples * 39.274 vmafmotion * 39.275 vpp\_amf * 39.275.1 Examples * 39.276 vstack * 39.277 w3fdif * 39.277.1 Commands * 39.278 waveform * 39.279 weave, doubleweave * 39.279.1 Examples * 39.280 xbr * 39.281 xcorrelate * 39.282 xfade * 39.282.1 Examples * 39.283 xmedian * 39.283.1 Commands * 39.284 xpsnr * 39.284.1 Examples * 39.285 xstack * 39.285.1 Examples * 39.286 yadif * 39.287 yaepblur * 39.287.1 Commands * 39.288 zoompan * 39.288.1 Examples * 39.289 zscale * 39.289.1 Options * 39.289.2 Commands * 40 CUDA Video Filters * 40.1 CUDA * 40.1.1 bilateral\_cuda * 40.1.1.1 Examples * 40.1.2 bwdif\_cuda * 40.1.3 chromakey\_cuda * 40.1.3.1 Examples * 40.1.4 colorspace\_cuda * 40.1.5 overlay\_cuda * 40.1.6 scale\_cuda * 40.1.6.1 Examples * 40.1.7 thumbnail\_cuda * 40.1.7.1 Example * 40.1.8 yadif\_cuda * 40.2 CUDA NPP * 40.2.1 scale\_npp * 40.2.2 scale2ref\_npp * 40.2.2.1 Examples * 40.2.3 sharpen\_npp * 40.2.4 transpose\_npp * 41 OpenCL Video Filters * 41.1 avgblur\_opencl * 41.1.1 Example * 41.2 boxblur\_opencl * 41.2.1 Examples * 41.3 colorkey\_opencl * 41.3.1 Examples * 41.4 convolution\_opencl * 41.4.1 Examples * 41.5 erosion\_opencl * 41.5.1 Example * 41.6 deshake\_opencl * 41.6.1 Examples * 41.7 dilation\_opencl * 41.7.1 Example * 41.8 nlmeans\_opencl * 41.9 overlay\_opencl * 41.9.1 Examples * 41.10 pad\_opencl * 41.11 prewitt\_opencl * 41.11.1 Example * 41.12 program\_opencl * 41.13 remap\_opencl * 41.14 roberts\_opencl * 41.14.1 Example * 41.15 sobel\_opencl * 41.15.1 Example * 41.16 tonemap\_opencl * 41.16.1 Example * 41.17 unsharp\_opencl * 41.17.1 Examples * 41.18 xfade\_opencl * 42 VAAPI Video Filters * 42.1 overlay\_vaapi * 42.1.1 Examples * 42.2 tonemap\_vaapi * 42.2.1 Example * 42.3 hstack\_vaapi * 42.4 vstack\_vaapi * 42.5 xstack\_vaapi * 42.6 pad\_vaapi * 42.7 drawbox\_vaapi * 42.7.1 Examples * 43 Vulkan Video Filters * 43.1 avgblur\_vulkan * 43.2 blend\_vulkan * 43.3 bwdif\_vulkan * 43.4 chromaber\_vulkan * 43.5 color\_vulkan * 43.6 vflip\_vulkan * 43.7 hflip\_vulkan * 43.8 flip\_vulkan * 43.9 gblur\_vulkan * 43.10 nlmeans\_vulkan * 43.11 overlay\_vulkan * 43.12 transpose\_vt * 43.13 transpose\_vulkan * 44 QSV Video Filters * 44.1 hstack\_qsv * 44.2 vstack\_qsv * 44.3 xstack\_qsv * 45 Video Sources * 45.1 buffer * 45.2 cellauto * 45.2.1 Examples * 45.3 coreimagesrc * 45.3.1 Examples * 45.4 ddagrab * 45.4.1 Examples * 45.5 gradients * 45.5.1 Commands * 45.6 mandelbrot * 45.7 mptestsrc * 45.8 frei0r\_src * 45.9 life * 45.9.1 Examples * 45.10 perlin * 45.10.1 Options * 45.10.2 Examples * 45.11 qrencodesrc * 45.11.1 Examples * 45.12 allrgb, allyuv, color, colorchart, colorspectrum, haldclutsrc, nullsrc, pal75bars, pal100bars, rgbtestsrc, smptebars, smptehdbars, testsrc, testsrc2, yuvtestsrc * 45.12.1 Examples * 45.12.2 Commands * 45.13 openclsrc * 45.14 sierpinski * 45.15 zoneplate * 45.15.1 Commands * 45.15.2 Examples * 46 Video Sinks * 46.1 buffersink * 46.2 nullsink * 47 Multimedia Filters * 47.1 a3dscope * 47.1.1 Commands * 47.2 abitscope * 47.3 adrawgraph * 47.4 agraphmonitor * 47.5 ahistogram * 47.6 aphasemeter * 47.6.1 phasing detection * 47.6.2 Examples * 47.7 avectorscope * 47.7.1 Examples * 47.7.2 Commands * 47.8 bench, abench * 47.8.1 Examples * 47.9 concat * 47.9.1 Examples * 47.9.2 Commands * 47.10 ebur128 * 47.10.1 Examples * 47.11 interleave, ainterleave * 47.11.1 Examples * 47.12 latency, alatency * 47.13 metadata, ametadata * 47.13.1 Examples * 47.14 perms, aperms * 47.15 realtime, arealtime * 47.15.1 Commands * 47.16 segment, asegment * 47.16.1 Examples * 47.17 select, aselect * 47.17.1 Examples * 47.18 sendcmd, asendcmd * 47.18.1 Commands syntax * 47.18.2 Examples * 47.19 setpts, asetpts * 47.19.1 Examples * 47.19.2 Commands * 47.20 setrange * 47.21 settb, asettb * 47.21.1 Examples * 47.22 showcqt * 47.22.1 Examples * 47.23 showcwt * 47.24 showfreqs * 47.25 showspatial * 47.26 showspectrum * 47.26.1 Examples * 47.27 showspectrumpic * 47.27.1 Examples * 47.28 showvolume * 47.29 showwaves * 47.29.1 Examples * 47.30 showwavespic * 47.30.1 Examples * 47.31 sidedata, asidedata * 47.32 spectrumsynth * 47.32.1 Examples * 47.33 split, asplit * 47.33.1 Examples * 47.34 zmq, azmq * 47.34.1 Examples * 48 Multimedia Sources * 48.1 amovie * 48.2 avsynctest * 48.2.1 Commands * 48.3 movie * 48.3.1 Examples * 48.3.2 Commands * 49 External libraries * 49.1 Alliance for Open Media (AOM) * 49.2 AMD AMF/VCE * 49.3 AviSynth * 49.4 Chromaprint * 49.5 codec2 * 49.6 dav1d * 49.7 davs2 * 49.8 uavs3d * 49.9 Game Music Emu * 49.10 Intel QuickSync Video * 49.11 Kvazaar * 49.12 LAME * 49.13 LCEVCdec * 49.14 libilbc * 49.15 libjxl * 49.16 libvpx * 49.17 ModPlug * 49.18 OpenCORE, VisualOn, and Fraunhofer libraries * 49.18.1 OpenCORE AMR * 49.18.2 VisualOn AMR-WB encoder library * 49.18.3 Fraunhofer AAC library * 49.18.4 LC3 library * 49.19 OpenH264 * 49.20 OpenJPEG * 49.21 rav1e * 49.22 SVT-AV1 * 49.23 TwoLAME * 49.24 VapourSynth * 49.25 x264 * 49.26 x265 * 49.27 xavs * 49.28 xavs2 * 49.29 eXtra-fast Essential Video Encoder (XEVE) * 49.30 eXtra-fast Essential Video Decoder (XEVD) * 49.31 ZVBI * 50 Supported File Formats, Codecs or Features * 50.1 File Formats * 50.2 Image Formats * 50.3 Video Codecs * 50.4 Audio Codecs * 50.5 Subtitle Formats * 50.6 Network Protocols * 50.7 Input/Output Devices * 50.8 Timecode * 51 See Also ## 1 Synopsis ffmpeg \[global\_options\] {\[input\_file\_options\] -i input\_url} ... {\[output\_file\_options\] output\_url} ... ## 2 Description `ffmpeg` is a universal media converter. It can read a wide variety of inputs - including live grabbing/recording devices - filter, and transcode them into a plethora of output formats. `ffmpeg` reads from an arbitrary number of inputs (which can be regular files, pipes, network streams, grabbing devices, etc.), specified by the `-i` option, and writes to an arbitrary number of outputs, which are specified by a plain output url. Anything found on the command line which cannot be interpreted as an option is considered to be an output url. Each input or output can, in principle, contain any number of elementary streams of different types (video/audio/subtitle/attachment/data), though the allowed stream counts and/or types may be limited by the container format. Selecting which streams from which inputs will go into which output is either done automatically or with the `-map` option (see the Stream selection chapter). To refer to inputs/outputs in options, you must use their indices (0-based). E.g. the first input is `0`, the second is `1`, etc. Similarly, streams within an input/output are referred to by their indices. E.g. `2:3` refers to the fourth stream in the third input or output. Also see the Stream specifiers chapter. As a general rule, options are applied to the next specified file. Therefore, order is important, and you can have the same option on the command line multiple times. Each occurrence is then applied to the next input or output file. Exceptions from this rule are the global options (e.g. verbosity level), which should be specified first. Do not mix input and output files – first specify all input files, then all output files. Also do not mix options which belong to different files. All options apply ONLY to the next input or output file and are reset between files. Some simple examples follow. * Convert an input media file to a different format, by re-encoding media streams: ffmpeg -i input.avi output.mp4 * Set the video bitrate of the output file to 64 kbit/s: ffmpeg -i input.avi -b:v 64k -bufsize 64k output.mp4 * Force the frame rate of the output file to 24 fps: ffmpeg -i input.avi -r 24 output.mp4 * Force the frame rate of the input file (valid for raw formats only) to 1 fps and the frame rate of the output file to 24 fps: ffmpeg -r 1 -i input.m2v -r 24 output.mp4 The format option may be needed for raw input files. ## 3 Detailed description `ffmpeg` builds a transcoding pipeline out of the components listed below. The program’s operation then consists of input data chunks flowing from the sources down the pipes towards the sinks, while being transformed by the components they encounter along the way. The following kinds of components are available: * _Demuxers_ (short for "demultiplexers") read an input source in order to extract * global properties such as metadata or chapters; * list of input elementary streams and their properties One demuxer instance is created for each \-i option, and sends encoded _packets_ to _decoders_ or _muxers_. In other literature, demuxers are sometimes called _splitters_, because their main function is splitting a file into elementary streams (though some files only contain one elementary stream). A schematic representation of a demuxer looks like this: ┌──────────┬───────────────────────┐ │ demuxer │ │ packets for stream 0 ╞══════════╡ elementary stream 0 ├──────────────────────► │ │ │ │ global ├───────────────────────┤ │properties│ │ packets for stream 1 │ and │ elementary stream 1 ├──────────────────────► │ metadata │ │ │ ├───────────────────────┤ │ │ │ │ │ ........... │ │ │ │ │ ├───────────────────────┤ │ │ │ packets for stream N │ │ elementary stream N ├──────────────────────► │ │ │ └──────────┴───────────────────────┘ ▲ │ │ read from file, network stream, │ grabbing device, etc. │ * _Decoders_ receive encoded (compressed) _packets_ for an audio, video, or subtitle elementary stream, and decode them into raw _frames_ (arrays of pixels for video, PCM for audio). A decoder is typically associated with (and receives its input from) an elementary stream in a _demuxer_, but sometimes may also exist on its own (see Loopback decoders). A schematic representation of a decoder looks like this: ┌─────────┐ packets │ │ raw frames ─────────►│ decoder ├────────────► │ │ └─────────┘ * _Filtergraphs_ process and transform raw audio or video _frames_. A filtergraph consists of one or more individual _filters_ linked into a graph. Filtergraphs come in two flavors - _simple_ and _complex_, configured with the \-filter and \-filter\_complex options, respectively. A simple filtergraph is associated with an _output elementary stream_; it receives the input to be filtered from a _decoder_ and sends filtered output to that output stream’s _encoder_. A simple video filtergraph that performs deinterlacing (using the `yadif` deinterlacer) followed by resizing (using the `scale` filter) can look like this: ┌────────────────────────┐ │ simple filtergraph │ frames from ╞════════════════════════╡ frames for a decoder │ ┌───────┐ ┌───────┐ │ an encoder ────────────►├─►│ yadif ├─►│ scale ├─►│────────────► │ └───────┘ └───────┘ │ └────────────────────────┘ A complex filtergraph is standalone and not associated with any specific stream. It may have multiple (or zero) inputs, potentially of different types (audio or video), each of which receiving data either from a decoder or another complex filtergraph’s output. It also has one or more outputs that feed either an encoder or another complex filtergraph’s input. The following example diagram represents a complex filtergraph with 3 inputs and 2 outputs (all video): ┌─────────────────────────────────────────────────┐ │ complex filtergraph │ ╞═════════════════════════════════════════════════╡ frames ├───────┐ ┌─────────┐ ┌─────────┐ ┌────────┤ frames ─────────►│input 0├─►│ overlay ├─────►│ overlay ├─►│output 0├────────► ├───────┘ │ │ │ │ └────────┤ frames ├───────┐╭►│ │ ╭►│ │ │ ─────────►│input 1├╯ └─────────┘ │ └─────────┘ │ ├───────┘ │ │ frames ├───────┐ ┌─────┐ ┌─────┬─╯ ┌────────┤ frames ─────────►│input 2├►│scale├►│split├───────────────►│output 1├────────► ├───────┘ └─────┘ └─────┘ └────────┤ └─────────────────────────────────────────────────┘ Frames from second input are overlaid over those from the first. Frames from the third input are rescaled, then the duplicated into two identical streams. One of them is overlaid over the combined first two inputs, with the result exposed as the filtergraph’s first output. The other duplicate ends up being the filtergraph’s second output. * _Encoders_ receive raw audio, video, or subtitle _frames_ and encode them into encoded _packets_. The encoding (compression) process is typically _lossy_ - it degrades stream quality to make the output smaller; some encoders are _lossless_, but at the cost of much higher output size. A video or audio encoder receives its input from some filtergraph’s output, subtitle encoders receive input from a decoder (since subtitle filtering is not supported yet). Every encoder is associated with some muxer’s _output elementary stream_ and sends its output to that muxer. A schematic representation of an encoder looks like this: ┌─────────┐ raw frames │ │ packets ────────────►│ encoder ├─────────► │ │ └─────────┘ * _Muxers_ (short for "multiplexers") receive encoded _packets_ for their elementary streams from encoders (the _transcoding_ path) or directly from demuxers (the _streamcopy_ path), interleave them (when there is more than one elementary stream), and write the resulting bytes into the output file (or pipe, network stream, etc.). A schematic representation of a muxer looks like this: ┌──────────────────────┬───────────┐ packets for stream 0 │ │ muxer │ ──────────────────────►│ elementary stream 0 ╞═══════════╡ │ │ │ ├──────────────────────┤ global │ packets for stream 1 │ │properties │ ──────────────────────►│ elementary stream 1 │ and │ │ │ metadata │ ├──────────────────────┤ │ │ │ │ │ ........... │ │ │ │ │ ├──────────────────────┤ │ packets for stream N │ │ │ ──────────────────────►│ elementary stream N │ │ │ │ │ └──────────────────────┴─────┬─────┘ │ write to file, network stream, │ grabbing device, etc. │ │ ▼ ### 3.1 Streamcopy The simplest pipeline in `ffmpeg` is single-stream _streamcopy_, that is copying one _input elementary stream_’s packets without decoding, filtering, or encoding them. As an example, consider an input file called INPUT.mkv with 3 elementary streams, from which we take the second and write it to file OUTPUT.mp4. A schematic representation of such a pipeline looks like this: ┌──────────┬─────────────────────┐ │ demuxer │ │ unused ╞══════════╡ elementary stream 0 ├────────╳ │ │ │ │INPUT.mkv ├─────────────────────┤ ┌──────────────────────┬───────────┐ │ │ │ packets │ │ muxer │ │ │ elementary stream 1 ├─────────►│ elementary stream 0 ╞═══════════╡ │ │ │ │ │OUTPUT.mp4 │ │ ├─────────────────────┤ └──────────────────────┴───────────┘ │ │ │ unused │ │ elementary stream 2 ├────────╳ │ │ │ └──────────┴─────────────────────┘ The above pipeline can be constructed with the following commandline: ffmpeg -i INPUT.mkv -map 0:1 -c copy OUTPUT.mp4 In this commandline * there is a single input INPUT.mkv; * there are no input options for this input; * there is a single output OUTPUT.mp4; * there are two output options for this output: * `-map 0:1` selects the input stream to be used - from input with index 0 (i.e. the first one) the stream with index 1 (i.e. the second one); * `-c copy` selects the `copy` encoder, i.e. streamcopy with no decoding or encoding. Streamcopy is useful for changing the elementary stream count, container format, or modifying container-level metadata. Since there is no decoding or encoding, it is very fast and there is no quality loss. However, it might not work in some cases because of a variety of factors (e.g. certain information required by the target container is not available in the source). Applying filters is obviously also impossible, since filters work on decoded frames. More complex streamcopy scenarios can be constructed - e.g. combining streams from two input files into a single output: ┌──────────┬────────────────────┐ ┌────────────────────┬───────────┐ │ demuxer 0│ │ packets │ │ muxer │ ╞══════════╡elementary stream 0 ├────────►│elementary stream 0 ╞═══════════╡ │INPUT0.mkv│ │ │ │OUTPUT.mp4 │ └──────────┴────────────────────┘ ├────────────────────┤ │ ┌──────────┬────────────────────┐ │ │ │ │ demuxer 1│ │ packets │elementary stream 1 │ │ ╞══════════╡elementary stream 0 ├────────►│ │ │ │INPUT1.aac│ │ └────────────────────┴───────────┘ └──────────┴────────────────────┘ that can be built by the commandline ffmpeg -i INPUT0.mkv -i INPUT1.aac -map 0:0 -map 1:0 -c copy OUTPUT.mp4 The output \-map option is used twice here, creating two streams in the output file - one fed by the first input and one by the second. The single instance of the \-c option selects streamcopy for both of those streams. You could also use multiple instances of this option together with Stream specifiers to apply different values to each stream, as will be demonstrated in following sections. A converse scenario is splitting multiple streams from a single input into multiple outputs: ┌──────────┬─────────────────────┐ ┌───────────────────┬───────────┐ │ demuxer │ │ packets │ │ muxer 0 │ ╞══════════╡ elementary stream 0 ├─────────►│elementary stream 0╞═══════════╡ │ │ │ │ │OUTPUT0.mp4│ │INPUT.mkv ├─────────────────────┤ └───────────────────┴───────────┘ │ │ │ packets ┌───────────────────┬───────────┐ │ │ elementary stream 1 ├─────────►│ │ muxer 1 │ │ │ │ │elementary stream 0╞═══════════╡ └──────────┴─────────────────────┘ │ │OUTPUT1.mp4│ └───────────────────┴───────────┘ built with ffmpeg -i INPUT.mkv -map 0:0 -c copy OUTPUT0.mp4 -map 0:1 -c copy OUTPUT1.mp4 Note how a separate instance of the \-c option is needed for every output file even though their values are the same. This is because non-global options (which is most of them) only apply in the context of the file before which they are placed. These examples can of course be further generalized into arbitrary remappings of any number of inputs into any number of outputs. ### 3.2 Trancoding _Transcoding_ is the process of decoding a stream and then encoding it again. Since encoding tends to be computationally expensive and in most cases degrades the stream quality (i.e. it is _lossy_), you should only transcode when you need to and perform streamcopy otherwise. Typical reasons to transcode are: * applying filters - e.g. resizing, deinterlacing, or overlaying video; resampling or mixing audio; * you want to feed the stream to something that cannot decode the original codec. Note that `ffmpeg` will transcode all audio, video, and subtitle streams unless you specify \-c copy for them. Consider an example pipeline that reads an input file with one audio and one video stream, transcodes the video and copies the audio into a single output file. This can be schematically represented as follows ┌──────────┬─────────────────────┐ │ demuxer │ │ audio packets ╞══════════╡ stream 0 (audio) ├─────────────────────────────────────╮ │ │ │ │ │INPUT.mkv ├─────────────────────┤ video ┌─────────┐ raw │ │ │ │ packets │ video │ video frames │ │ │ stream 1 (video) ├─────────►│ decoder ├──────────────╮ │ │ │ │ │ │ │ │ └──────────┴─────────────────────┘ └─────────┘ │ │ ▼ ▼ │ │ ┌──────────┬─────────────────────┐ video ┌─────────┐ │ │ │ muxer │ │ packets │ video │ │ │ ╞══════════╡ stream 0 (video) │◄─────────┤ encoder ├──────────────╯ │ │ │ │ │(libx264)│ │ │OUTPUT.mp4├─────────────────────┤ └─────────┘ │ │ │ │ │ │ │ stream 1 (audio) │◄────────────────────────────────────╯ │ │ │ └──────────┴─────────────────────┘ and implemented with the following commandline: ffmpeg -i INPUT.mkv -map 0:v -map 0:a -c:v libx264 -c:a copy OUTPUT.mp4 Note how it uses stream specifiers `:v` and `:a` to select input streams and apply different values of the \-c option to them; see the Stream specifiers section for more details. ### 3.3 Filtering When transcoding, audio and video streams can be filtered before encoding, with either a _simple_ or _complex_ filtergraph. #### 3.3.1 Simple filtergraphs Simple filtergraphs are those that have exactly one input and output, both of the same type (audio or video). They are configured with the per-stream \-filter option (with \-vf and \-af aliases for \-filter:v (video) and \-filter:a (audio) respectively). Note that simple filtergraphs are tied to their output stream, so e.g. if you have multiple audio streams, \-af will create a separate filtergraph for each one. Taking the trancoding example from above, adding filtering (and omitting audio, for clarity) makes it look like this: ┌──────────┬───────────────┐ │ demuxer │ │ ┌─────────┐ ╞══════════╡ video stream │ packets │ video │ frames │INPUT.mkv │ ├─────────►│ decoder ├─────►───╮ │ │ │ └─────────┘ │ └──────────┴───────────────┘ │ ╭───────────◄───────────╯ │ ┌────────────────────────┐ │ │ simple filtergraph │ │ ╞════════════════════════╡ │ │ ┌───────┐ ┌───────┐ │ ╰──►├─►│ yadif ├─►│ scale ├─►├╮ │ └───────┘ └───────┘ ││ └────────────────────────┘│ │ │ ┌──────────┬───────────────┐ video ┌─────────┐ │ │ muxer │ │ packets │ video │ │ ╞══════════╡ video stream │◄─────────┤ encoder ├───────◄───────╯ │OUTPUT.mp4│ │ │ │ │ │ │ └─────────┘ └──────────┴───────────────┘ #### 3.3.2 Complex filtergraphs Complex filtergraphs are those which cannot be described as simply a linear processing chain applied to one stream. This is the case, for example, when the graph has more than one input and/or output, or when output stream type is different from input. Complex filtergraphs are configured with the \-filter\_complex option. Note that this option is global, since a complex filtergraph, by its nature, cannot be unambiguously associated with a single stream or file. Each instance of \-filter\_complex creates a new complex filtergraph, and there can be any number of them. A trivial example of a complex filtergraph is the `overlay` filter, which has two video inputs and one video output, containing one video overlaid on top of the other. Its audio counterpart is the `amix` filter. ### 3.4 Loopback decoders While decoders are normally associated with demuxer streams, it is also possible to create "loopback" decoders that decode the output from some encoder and allow it to be fed back to complex filtergraphs. This is done with the `-dec` directive, which takes as a parameter the index of the output stream that should be decoded. Every such directive creates a new loopback decoder, indexed with successive integers starting at zero. These indices should then be used to refer to loopback decoders in complex filtergraph link labels, as described in the documentation for \-filter\_complex. Decoding AVOptions can be passed to loopback decoders by placing them before `-dec`, analogously to input/output options. E.g. the following example: ffmpeg -i INPUT \\ -map 0:v:0 -c:v libx264 -crf 45 -f null - \\ -threads 3 -dec 0:0 \\ -filter\_complex '\[0:v\]\[dec:0\]hstack\[stack\]' \\ -map '\[stack\]' -c:v ffv1 OUTPUT reads an input video and * (line 2) encodes it with `libx264` at low quality; * (line 3) decodes this encoded stream using 3 threads; * (line 4) places decoded video side by side with the original input video; * (line 5) combined video is then losslessly encoded and written into OUTPUT. Such a transcoding pipeline can be represented with the following diagram: ┌──────────┬───────────────┐ │ demuxer │ │ ┌─────────┐ ┌─────────┐ ┌────────────────────┐ ╞══════════╡ video stream │ │ video │ │ video │ │ null muxer │ │ INPUT │ ├──►│ decoder ├──┬────────►│ encoder ├─┬─►│(discards its input)│ │ │ │ └─────────┘ │ │(libx264)│ │ └────────────────────┘ └──────────┴───────────────┘ │ └─────────┘ │ ╭───────◄──╯ ┌─────────┐ │ │ │loopback │ │ │ ╭─────◄──────┤ decoder ├────◄──╯ │ │ └─────────┘ │ │ │ │ │ │ ┌───────────────────┐ │ │ │complex filtergraph│ │ │ ╞═══════════════════╡ │ │ │ ┌─────────────┐ │ ╰─╫─►├─►│ hstack ├─►├╮ ╰─►├─►│ │ ││ │ └─────────────┘ ││ └───────────────────┘│ │ ┌──────────┬───────────────┐ ┌─────────┐ │ │ muxer │ │ │ video │ │ ╞══════════╡ video stream │◄─┤ encoder ├───────◄──────────╯ │ OUTPUT │ │ │ (ffv1) │ │ │ │ └─────────┘ └──────────┴───────────────┘ ## 4 Stream selection `ffmpeg` provides the `-map` option for manual control of stream selection in each output file. Users can skip `-map` and let ffmpeg perform automatic stream selection as described below. The `-vn / -an / -sn / -dn` options can be used to skip inclusion of video, audio, subtitle and data streams respectively, whether manually mapped or automatically selected, except for those streams which are outputs of complex filtergraphs. ### 4.1 Description The sub-sections that follow describe the various rules that are involved in stream selection. The examples that follow next show how these rules are applied in practice. While every effort is made to accurately reflect the behavior of the program, FFmpeg is under continuous development and the code may have changed since the time of this writing. #### 4.1.1 Automatic stream selection In the absence of any map options for a particular output file, ffmpeg inspects the output format to check which type of streams can be included in it, viz. video, audio and/or subtitles. For each acceptable stream type, ffmpeg will pick one stream, when available, from among all the inputs. It will select that stream based upon the following criteria: * for video, it is the stream with the highest resolution, * for audio, it is the stream with the most channels, * for subtitles, it is the first subtitle stream found but there’s a caveat. The output format’s default subtitle encoder can be either text-based or image-based, and only a subtitle stream of the same type will be chosen. In the case where several streams of the same type rate equally, the stream with the lowest index is chosen. Data or attachment streams are not automatically selected and can only be included using `-map`. #### 4.1.2 Manual stream selection When `-map` is used, only user-mapped streams are included in that output file, with one possible exception for filtergraph outputs described below. #### 4.1.3 Complex filtergraphs If there are any complex filtergraph output streams with unlabeled pads, they will be added to the first output file. This will lead to a fatal error if the stream type is not supported by the output format. In the absence of the map option, the inclusion of these streams leads to the automatic stream selection of their types being skipped. If map options are present, these filtergraph streams are included in addition to the mapped streams. Complex filtergraph output streams with labeled pads must be mapped once and exactly once. #### 4.1.4 Stream handling Stream handling is independent of stream selection, with an exception for subtitles described below. Stream handling is set via the `-codec` option addressed to streams within a specific _output_ file. In particular, codec options are applied by ffmpeg after the stream selection process and thus do not influence the latter. If no `-codec` option is specified for a stream type, ffmpeg will select the default encoder registered by the output file muxer. An exception exists for subtitles. If a subtitle encoder is specified for an output file, the first subtitle stream found of any type, text or image, will be included. ffmpeg does not validate if the specified encoder can convert the selected stream or if the converted stream is acceptable within the output format. This applies generally as well: when the user sets an encoder manually, the stream selection process cannot check if the encoded stream can be muxed into the output file. If it cannot, ffmpeg will abort and _all_ output files will fail to be processed. ### 4.2 Examples The following examples illustrate the behavior, quirks and limitations of ffmpeg’s stream selection methods. They assume the following three input files. input file 'A.avi' stream 0: video 640x360 stream 1: audio 2 channels input file 'B.mp4' stream 0: video 1920x1080 stream 1: audio 2 channels stream 2: subtitles (text) stream 3: audio 5.1 channels stream 4: subtitles (text) input file 'C.mkv' stream 0: video 1280x720 stream 1: audio 2 channels stream 2: subtitles (image) #### Example: automatic stream selection ffmpeg -i A.avi -i B.mp4 out1.mkv out2.wav -map 1:a -c:a copy out3.mov There are three output files specified, and for the first two, no `-map` options are set, so ffmpeg will select streams for these two files automatically. out1.mkv is a Matroska container file and accepts video, audio and subtitle streams, so ffmpeg will try to select one of each type. For video, it will select `stream 0` from B.mp4, which has the highest resolution among all the input video streams. For audio, it will select `stream 3` from B.mp4, since it has the greatest number of channels. For subtitles, it will select `stream 2` from B.mp4, which is the first subtitle stream from among A.avi and B.mp4. out2.wav accepts only audio streams, so only `stream 3` from B.mp4 is selected. For out3.mov, since a `-map` option is set, no automatic stream selection will occur. The `-map 1:a` option will select all audio streams from the second input B.mp4. No other streams will be included in this output file. For the first two outputs, all included streams will be transcoded. The encoders chosen will be the default ones registered by each output format, which may not match the codec of the selected input streams. For the third output, codec option for audio streams has been set to `copy`, so no decoding-filtering-encoding operations will occur, or _can_ occur. Packets of selected streams shall be conveyed from the input file and muxed within the output file. #### Example: automatic subtitles selection ffmpeg -i C.mkv out1.mkv -c:s dvdsub -an out2.mkv Although out1.mkv is a Matroska container file which accepts subtitle streams, only a video and audio stream shall be selected. The subtitle stream of C.mkv is image-based and the default subtitle encoder of the Matroska muxer is text-based, so a transcode operation for the subtitles is expected to fail and hence the stream isn’t selected. However, in out2.mkv, a subtitle encoder is specified in the command and so, the subtitle stream is selected, in addition to the video stream. The presence of `-an` disables audio stream selection for out2.mkv. #### Example: unlabeled filtergraph outputs ffmpeg -i A.avi -i C.mkv -i B.mp4 -filter\_complex "overlay" out1.mp4 out2.srt A filtergraph is setup here using the `-filter_complex` option and consists of a single video filter. The `overlay` filter requires exactly two video inputs, but none are specified, so the first two available video streams are used, those of A.avi and C.mkv. The output pad of the filter has no label and so is sent to the first output file out1.mp4. Due to this, automatic selection of the video stream is skipped, which would have selected the stream in B.mp4. The audio stream with most channels viz. `stream 3` in B.mp4, is chosen automatically. No subtitle stream is chosen however, since the MP4 format has no default subtitle encoder registered, and the user hasn’t specified a subtitle encoder. The 2nd output file, out2.srt, only accepts text-based subtitle streams. So, even though the first subtitle stream available belongs to C.mkv, it is image-based and hence skipped. The selected stream, `stream 2` in B.mp4, is the first text-based subtitle stream. #### Example: labeled filtergraph outputs ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter\_complex "\[1:v\]hue=s=0\[outv\];overlay;aresample" \\ -map '\[outv\]' -an out1.mp4 \\ out2.mkv \\ -map '\[outv\]' -map 1:a:0 out3.mkv The above command will fail, as the output pad labelled `[outv]` has been mapped twice. None of the output files shall be processed. ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter\_complex "\[1:v\]hue=s=0\[outv\];overlay;aresample" \\ -an out1.mp4 \\ out2.mkv \\ -map 1:a:0 out3.mkv This command above will also fail as the hue filter output has a label, `[outv]`, and hasn’t been mapped anywhere. The command should be modified as follows, ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter\_complex "\[1:v\]hue=s=0,split=2\[outv1\]\[outv2\];overlay;aresample" \\ -map '\[outv1\]' -an out1.mp4 \\ out2.mkv \\ -map '\[outv2\]' -map 1:a:0 out3.mkv The video stream from B.mp4 is sent to the hue filter, whose output is cloned once using the split filter, and both outputs labelled. Then a copy each is mapped to the first and third output files. The overlay filter, requiring two video inputs, uses the first two unused video streams. Those are the streams from A.avi and C.mkv. The overlay output isn’t labelled, so it is sent to the first output file out1.mp4, regardless of the presence of the `-map` option. The aresample filter is sent the first unused audio stream, that of A.avi. Since this filter output is also unlabelled, it too is mapped to the first output file. The presence of `-an` only suppresses automatic or manual stream selection of audio streams, not outputs sent from filtergraphs. Both these mapped streams shall be ordered before the mapped stream in out1.mp4. The video, audio and subtitle streams mapped to `out2.mkv` are entirely determined by automatic stream selection. out3.mkv consists of the cloned video output from the hue filter and the first audio stream from B.mp4. ## 5 Options All the numerical options, if not specified otherwise, accept a string representing a number as input, which may be followed by one of the SI unit prefixes, for example: ’K’, ’M’, or ’G’. If ’i’ is appended to the SI unit prefix, the complete prefix will be interpreted as a unit prefix for binary multiples, which are based on powers of 1024 instead of powers of 1000. Appending ’B’ to the SI unit prefix multiplies the value by 8. This allows using, for example: ’KB’, ’MiB’, ’G’ and ’B’ as number suffixes. Options which do not take arguments are boolean options, and set the corresponding value to true. They can be set to false by prefixing the option name with "no". For example using "-nofoo" will set the boolean option with name "foo" to false. Options that take arguments support a special syntax where the argument given on the command line is interpreted as a path to the file from which the actual argument value is loaded. To use this feature, add a forward slash ’/’ immediately before the option name (after the leading dash). E.g. ffmpeg -i INPUT -/filter:v filter.script OUTPUT will load a filtergraph description from the file named filter.script. ### 5.1 Stream specifiers Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) a given option belongs to. A stream specifier is a string generally appended to the option name and separated from it by a colon. E.g. `-codec:a:1 ac3` contains the `a:1` stream specifier, which matches the second audio stream. Therefore, it would select the ac3 codec for the second audio stream. A stream specifier can match several streams, so that the option is applied to all of them. E.g. the stream specifier in `-b:a 128k` matches all audio streams. An empty stream specifier matches all streams. For example, `-codec copy` or `-codec: copy` would copy all the streams without reencoding. Possible forms of stream specifiers are: stream\_index Matches the stream with this index. E.g. `-threads:1 4` would set the thread count for the second stream to 4. If stream\_index is used as an additional stream specifier (see below), then it selects stream number stream\_index from the matching streams. Stream numbering is based on the order of the streams as detected by libavformat except when a stream group specifier or program ID is also specified. In this case it is based on the ordering of the streams in the group or program. stream\_type\[:additional\_stream\_specifier\] stream\_type is one of following: ’v’ or ’V’ for video, ’a’ for audio, ’s’ for subtitle, ’d’ for data, and ’t’ for attachments. ’v’ matches all video streams, ’V’ only matches video streams which are not attached pictures, video thumbnails or cover arts. If additional\_stream\_specifier is used, then it matches streams which both have this type and match the additional\_stream\_specifier. Otherwise, it matches all streams of the specified type. g:group\_specifier\[:additional\_stream\_specifier\] Matches streams which are in the group with the specifier group\_specifier. if additional\_stream\_specifier is used, then it matches streams which both are part of the group and match the additional\_stream\_specifier. group\_specifier may be one of the following: group\_index Match the stream with this group index. #group\_id or i:group\_id Match the stream with this group id. p:program\_id\[:additional\_stream\_specifier\] Matches streams which are in the program with the id program\_id. If additional\_stream\_specifier is used, then it matches streams which both are part of the program and match the additional\_stream\_specifier. #stream\_id or i:stream\_id Match the stream by stream id (e.g. PID in MPEG-TS container). m:key\[:value\] Matches streams with the metadata tag key having the specified value. If value is not given, matches streams that contain the given tag with any value. The colon character ’:’ in key or value needs to be backslash-escaped. disp:dispositions\[:additional\_stream\_specifier\] Matches streams with the given disposition(s). dispositions is a list of one or more dispositions (as printed by the \-dispositions option) joined with ’+’. u Matches streams with usable configuration, the codec must be defined and the essential information such as video dimension or audio sample rate must be present. Note that in `ffmpeg`, matching by metadata will only work properly for input files. ### 5.2 Generic options These options are shared amongst the ff\* tools. \-L Show license. \-h, -?, -help, --help \[arg\] Show help. An optional parameter may be specified to print help about a specific item. If no argument is specified, only basic (non advanced) tool options are shown. Possible values of arg are: long Print advanced tool options in addition to the basic tool options. full Print complete list of options, including shared and private options for encoders, decoders, demuxers, muxers, filters, etc. decoder=decoder\_name Print detailed information about the decoder named decoder\_name. Use the \-decoders option to get a list of all decoders. encoder=encoder\_name Print detailed information about the encoder named encoder\_name. Use the \-encoders option to get a list of all encoders. demuxer=demuxer\_name Print detailed information about the demuxer named demuxer\_name. Use the \-formats option to get a list of all demuxers and muxers. muxer=muxer\_name Print detailed information about the muxer named muxer\_name. Use the \-formats option to get a list of all muxers and demuxers. filter=filter\_name Print detailed information about the filter named filter\_name. Use the \-filters option to get a list of all filters. bsf=bitstream\_filter\_name Print detailed information about the bitstream filter named bitstream\_filter\_name. Use the \-bsfs option to get a list of all bitstream filters. protocol=protocol\_name Print detailed information about the protocol named protocol\_name. Use the \-protocols option to get a list of all protocols. \-version Show version. \-buildconf Show the build configuration, one option per line. \-formats Show available formats (including devices). \-demuxers Show available demuxers. \-muxers Show available muxers. \-devices Show available devices. \-codecs Show all codecs known to libavcodec. Note that the term ’codec’ is used throughout this documentation as a shortcut for what is more correctly called a media bitstream format. \-decoders Show available decoders. \-encoders Show all available encoders. \-bsfs Show available bitstream filters. \-protocols Show available protocols. \-filters Show available libavfilter filters. \-pix\_fmts Show available pixel formats. \-sample\_fmts Show available sample formats. \-layouts Show channel names and standard channel layouts. \-dispositions Show stream dispositions. \-colors Show recognized color names. \-sources device\[,opt1\=val1\[,opt2\=val2\]...\] Show autodetected sources of the input device. Some devices may provide system-dependent source names that cannot be autodetected. The returned list cannot be assumed to be always complete. ffmpeg -sources pulse,server=192.168.0.4 \-sinks device\[,opt1\=val1\[,opt2\=val2\]...\] Show autodetected sinks of the output device. Some devices may provide system-dependent sink names that cannot be autodetected. The returned list cannot be assumed to be always complete. ffmpeg -sinks pulse,server=192.168.0.4 \-loglevel \[flags+\]loglevel | -v \[flags+\]loglevel Set logging level and flags used by the library. The optional flags prefix can consist of the following values: ‘repeat’ Indicates that repeated log output should not be compressed to the first line and the "Last message repeated n times" line will be omitted. ‘level’ Indicates that log output should add a `[level]` prefix to each message line. This can be used as an alternative to log coloring, e.g. when dumping the log to file. ‘time’ Indicates that log lines should be prefixed with time information. ‘datetime’ Indicates that log lines should be prefixed with date and time information. Flags can also be used alone by adding a ’+’/’-’ prefix to set/reset a single flag without affecting other flags or changing loglevel. When setting both flags and loglevel, a ’+’ separator is expected between the last flags value and before loglevel. loglevel is a string or a number containing one of the following values: ‘quiet, -8’ Show nothing at all; be silent. ‘panic, 0’ Only show fatal errors which could lead the process to crash, such as an assertion failure. This is not currently used for anything. ‘fatal, 8’ Only show fatal errors. These are errors after which the process absolutely cannot continue. ‘error, 16’ Show all errors, including ones which can be recovered from. ‘warning, 24’ Show all warnings and errors. Any message related to possibly incorrect or unexpected events will be shown. ‘info, 32’ Show informative messages during processing. This is in addition to warnings and errors. This is the default value. ‘verbose, 40’ Same as `info`, except more verbose. ‘debug, 48’ Show everything, including debugging information. ‘trace, 56’ For example to enable repeated log output, add the `level` prefix, and set loglevel to `verbose`: ffmpeg -loglevel repeat+level+verbose -i input output Another example that enables repeated log output without affecting current state of `level` prefix flag or loglevel: ffmpeg \[...\] -loglevel +repeat By default the program logs to stderr. If coloring is supported by the terminal, colors are used to mark errors and warnings. Log coloring can be disabled setting the environment variable `AV_LOG_FORCE_NOCOLOR`, or can be forced setting the environment variable `AV_LOG_FORCE_COLOR`. \-report Dump full command line and log output to a file named `program-YYYYMMDD-HHMMSS.log` in the current directory. This file can be useful for bug reports. It also implies `-loglevel debug`. Setting the environment variable `FFREPORT` to any value has the same effect. If the value is a ’:’-separated key=value sequence, these options will affect the report; option values must be escaped if they contain special characters or the options delimiter ’:’ (see the “Quoting and escaping” section in the ffmpeg-utils manual). The following options are recognized: file set the file name to use for the report; `%p` is expanded to the name of the program, `%t` is expanded to a timestamp, `%%` is expanded to a plain `%` level set the log verbosity level using a numerical value (see `-loglevel`). For example, to output a report to a file named ffreport.log using a log level of `32` (alias for log level `info`): FFREPORT=file=ffreport.log:level=32 ffmpeg -i input output Errors in parsing the environment variable are not fatal, and will not appear in the report. \-hide\_banner Suppress printing banner. All FFmpeg tools will normally show a copyright notice, build options and library versions. This option can be used to suppress printing this information. \-cpuflags flags (_global_) Allows setting and clearing cpu flags. This option is intended for testing. Do not use it unless you know what you’re doing. ffmpeg -cpuflags -sse+mmx ... ffmpeg -cpuflags mmx ... ffmpeg -cpuflags 0 ... Possible flags for this option are: ‘x86’ ‘mmx’ ‘mmxext’ ‘sse’ ‘sse2’ ‘sse2slow’ ‘sse3’ ‘sse3slow’ ‘ssse3’ ‘atom’ ‘sse4.1’ ‘sse4.2’ ‘avx’ ‘avx2’ ‘xop’ ‘fma3’ ‘fma4’ ‘3dnow’ ‘3dnowext’ ‘bmi1’ ‘bmi2’ ‘cmov’ ‘ARM’ ‘armv5te’ ‘armv6’ ‘armv6t2’ ‘vfp’ ‘vfpv3’ ‘neon’ ‘setend’ ‘AArch64’ ‘armv8’ ‘vfp’ ‘neon’ ‘PowerPC’ ‘altivec’ ‘Specific Processors’ ‘pentium2’ ‘pentium3’ ‘pentium4’ ‘k6’ ‘k62’ ‘athlon’ ‘athlonxp’ ‘k8’ \-cpucount count (_global_) Override detection of CPU count. This option is intended for testing. Do not use it unless you know what you’re doing. ffmpeg -cpucount 2 \-max\_alloc bytes Set the maximum size limit for allocating a block on the heap by ffmpeg’s family of malloc functions. Exercise **extreme caution** when using this option. Don’t use if you do not understand the full consequence of doing so. Default is INT\_MAX. ### 5.3 AVOptions These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the \-help option. They are separated into two categories: generic These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs. private These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs. For example to write an ID3v2.3 header instead of a default ID3v2.4 to an MP3 file, use the id3v2\_version private option of the MP3 muxer: ffmpeg -i input.flac -id3v2\_version 3 out.mp3 All codec AVOptions are per-stream, and thus a stream specifier should be attached to them: ffmpeg -i multichannel.mxf -map 0:v:0 -map 0:a:0 -map 0:a:0 -c:a:0 ac3 -b:a:0 640k -ac:a:1 2 -c:a:1 aac -b:2 128k out.mp4 In the above example, a multichannel audio stream is mapped twice for output. The first instance is encoded with codec ac3 and bitrate 640k. The second instance is downmixed to 2 channels and encoded with codec aac. A bitrate of 128k is specified for it using absolute index of the output stream. Note: the \-nooption syntax cannot be used for boolean AVOptions, use \-option 0/\-option 1. Note: the old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon. ### 5.4 Main options \-f fmt (_input/output_) Force input or output file format. The format is normally auto detected for input files and guessed from the file extension for output files, so this option is not needed in most cases. \-i url (_input_) input file url \-y (_global_) Overwrite output files without asking. \-n (_global_) Do not overwrite output files, and exit immediately if a specified output file already exists. \-stream\_loop number (_input_) Set number of times input stream shall be looped. Loop 0 means no loop, loop -1 means infinite loop. \-recast\_media (_global_) Allow forcing a decoder of a different media type than the one detected or designated by the demuxer. Useful for decoding media data muxed as data streams. \-c\[:stream\_specifier\] codec (_input/output,per-stream_) \-codec\[:stream\_specifier\] codec (_input/output,per-stream_) Select an encoder (when used before an output file) or a decoder (when used before an input file) for one or more streams. codec is the name of a decoder/encoder or a special value `copy` (output only) to indicate that the stream is not to be re-encoded. For example ffmpeg -i INPUT -map 0 -c:v libx264 -c:a copy OUTPUT encodes all video streams with libx264 and copies all audio streams. For each stream, the last matching `c` option is applied, so ffmpeg -i INPUT -map 0 -c copy -c:v:1 libx264 -c:a:137 libvorbis OUTPUT will copy all the streams except the second video, which will be encoded with libx264, and the 138th audio, which will be encoded with libvorbis. \-t duration (_input/output_) When used as an input option (before `-i`), limit the duration of data read from the input file. When used as an output option (before an output url), stop writing the output after its duration reaches duration. duration must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. \-to and -t are mutually exclusive and -t has priority. \-to position (_input/output_) Stop writing the output or reading the input at position. position must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. \-to and -t are mutually exclusive and -t has priority. \-fs limit\_size (_output_) Set the file size limit, expressed in bytes. No further chunk of bytes is written after the limit is exceeded. The size of the output file is slightly more than the requested file size. \-ss position (_input/output_) When used as an input option (before `-i`), seeks in this input file to position. Note that in most formats it is not possible to seek exactly, so `ffmpeg` will seek to the closest seek point before position. When transcoding and \-accurate\_seek is enabled (the default), this extra segment between the seek point and position will be decoded and discarded. When doing stream copy or when \-noaccurate\_seek is used, it will be preserved. When used as an output option (before an output url), decodes but discards input until the timestamps reach position. position must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. \-sseof position (_input_) Like the `-ss` option but relative to the "end of file". That is negative values are earlier in the file, 0 is at EOF. \-isync input\_index (_input_) Assign an input as a sync source. This will take the difference between the start times of the target and reference inputs and offset the timestamps of the target file by that difference. The source timestamps of the two inputs should derive from the same clock source for expected results. If `copyts` is set then `start_at_zero` must also be set. If either of the inputs has no starting timestamp then no sync adjustment is made. Acceptable values are those that refer to a valid ffmpeg input index. If the sync reference is the target index itself or \-1, then no adjustment is made to target timestamps. A sync reference may not itself be synced to any other input. Default value is \-1. \-itsoffset offset (_input_) Set the input time offset. offset must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. The offset is added to the timestamps of the input files. Specifying a positive offset means that the corresponding streams are delayed by the time duration specified in offset. \-itsscale scale (_input,per-stream_) Rescale input timestamps. scale should be a floating point number. \-timestamp date (_output_) Set the recording timestamp in the container. date must be a date specification, see (ffmpeg-utils)the Date section in the ffmpeg-utils(1) manual. \-metadata\[:metadata\_specifier\] key\=value (_output,per-metadata_) Set a metadata key/value pair. An optional metadata\_specifier may be given to set metadata on streams, chapters or programs. See `-map_metadata` documentation for details. This option overrides metadata set with `-map_metadata`. It is also possible to delete metadata by using an empty value. For example, for setting the title in the output file: ffmpeg -i in.avi -metadata title="my title" out.flv To set the language of the first audio stream: ffmpeg -i INPUT -metadata:s:a:0 language=eng OUTPUT \-disposition\[:stream\_specifier\] value (_output,per-stream_) Sets the disposition flags for a stream. Default value: by default, all disposition flags are copied from the input stream, unless the output stream this option applies to is fed by a complex filtergraph - in that case no disposition flags are set by default. value is a sequence of disposition flags separated by ’+’ or ’-’. A ’+’ prefix adds the given disposition, ’-’ removes it. If the first flag is also prefixed with ’+’ or ’-’, the resulting disposition is the default value updated by value. If the first flag is not prefixed, the resulting disposition is value. It is also possible to clear the disposition by setting it to 0. If no `-disposition` options were specified for an output file, ffmpeg will automatically set the ’default’ disposition flag on the first stream of each type, when there are multiple streams of this type in the output file and no stream of that type is already marked as default. The `-dispositions` option lists the known disposition flags. For example, to make the second audio stream the default stream: ffmpeg -i in.mkv -c copy -disposition:a:1 default out.mkv To make the second subtitle stream the default stream and remove the default disposition from the first subtitle stream: ffmpeg -i in.mkv -c copy -disposition:s:0 0 -disposition:s:1 default out.mkv To add an embedded cover/thumbnail: ffmpeg -i in.mp4 -i IMAGE -map 0 -map 1 -c copy -c:v:1 png -disposition:v:1 attached\_pic out.mp4 To add the ’original’ and remove the ’comment’ disposition flag from the first audio stream without removing its other disposition flags: ffmpeg -i in.mkv -c copy -disposition:a:0 +original-comment out.mkv To remove the ’original’ and add the ’comment’ disposition flag to the first audio stream without removing its other disposition flags: ffmpeg -i in.mkv -c copy -disposition:a:0 -original+comment out.mkv To set only the ’original’ and ’comment’ disposition flags on the first audio stream (and remove its other disposition flags): ffmpeg -i in.mkv -c copy -disposition:a:0 original+comment out.mkv To remove all disposition flags from the first audio stream: ffmpeg -i in.mkv -c copy -disposition:a:0 0 out.mkv Not all muxers support embedded thumbnails, and those who do, only support a few formats, like JPEG or PNG. \-program \[title=title:\]\[program\_num=program\_num:\]st=stream\[:st=stream...\] (_output_) Creates a program with the specified title, program\_num and adds the specified stream(s) to it. \-stream\_group \[map=input\_file\_id\=stream\_group\]\[type=type:\]st=stream\[:st=stream\]\[:stg=stream\_group\]\[:id=stream\_group\_id...\] (_output_) Creates a stream group of the specified type and stream\_group\_id, or by mapping an input group, adding the specified stream(s) and/or previously defined stream\_group(s) to it. type can be one of the following: iamf\_audio\_element Groups streams that belong to the same IAMF Audio Element For this group type, the following options are available audio\_element\_type The Audio Element type. The following values are supported: channel Scalable channel audio representation scene Ambisonics representation demixing Demixing information used to reconstruct a scalable channel audio representation. This option must be separated from the rest with a ’,’, and takes the following key=value options parameter\_id An identifier parameters blocks in frames may refer to dmixp\_mode A pre-defined combination of demixing parameters recon\_gain Recon gain information used to reconstruct a scalable channel audio representation. This option must be separated from the rest with a ’,’, and takes the following key=value options parameter\_id An identifier parameters blocks in frames may refer to layer A layer defining a Channel Layout in the Audio Element. This option must be separated from the rest with a ’,’. Several ’,’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options ch\_layout The layer’s channel layout flags The following flags are available: recon\_gain Wether to signal if recon\_gain is present as metadata in parameter blocks within frames output\_gain output\_gain\_flags Which channels output\_gain applies to. The following flags are available: FL FR BL BR TFL TFR ambisonics\_mode The ambisonics mode. This has no effect if audio\_element\_type is set to channel. The following values are supported: mono Each ambisonics channel is coded as an individual mono stream in the group default\_w Default weight value iamf\_mix\_presentation Groups streams that belong to all IAMF Audio Element the same IAMF Mix Presentation references For this group type, the following options are available submix A sub-mix within the Mix Presentation. This option must be separated from the rest with a ’,’. Several ’,’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options parameter\_id An identifier parameters blocks in frames may refer to, for post-processing the mixed audio signal to generate the audio signal for playback parameter\_rate The sample rate duration fields in parameters blocks in frames that refer to this parameter\_id are expressed as default\_mix\_gain Default mix gain value to apply when there are no parameter blocks sharing the same parameter\_id for a given frame element References an Audio Element used in this Mix Presentation to generate the final output audio signal for playback. This option must be separated from the rest with a ’|’. Several ’|’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options: stg The stream\_group\_id for an Audio Element which this sub-mix refers to parameter\_id An identifier parameters blocks in frames may refer to, for applying any processing to the referenced and rendered Audio Element before being summed with other processed Audio Elements parameter\_rate The sample rate duration fields in parameters blocks in frames that refer to this parameter\_id are expressed as default\_mix\_gain Default mix gain value to apply when there are no parameter blocks sharing the same parameter\_id for a given frame annotations A key=value string describing the sub-mix element where "key" is a string conforming to BCP-47 that specifies the language for the "value" string. "key" must be the same as the one in the mix’s annotations headphones\_rendering\_mode Indicates whether the input channel-based Audio Element is rendered to stereo loudspeakers or spatialized with a binaural renderer when played back on headphones. This has no effect if the referenced Audio Element’s audio\_element\_type is set to channel. The following values are supported: stereo binaural layout Specifies the layouts for this sub-mix on which the loudness information was measured. This option must be separated from the rest with a ’|’. Several ’|’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options: layout\_type loudspeakers The layout follows the loudspeaker sound system convention of ITU-2051-3. binaural The layout is binaural. sound\_system Channel layout matching one of Sound Systems A to J of ITU-2051-3, plus 7.1.2 and 3.1.2 This has no effect if layout\_type is set to binaural. integrated\_loudness The program integrated loudness information, as defined in ITU-1770-4. digital\_peak The digital (sampled) peak value of the audio signal, as defined in ITU-1770-4. true\_peak The true peak of the audio signal, as defined in ITU-1770-4. dialog\_anchored\_loudness The Dialogue loudness information, as defined in ITU-1770-4. album\_anchored\_loudness The Album loudness information, as defined in ITU-1770-4. annotations A key=value string string describing the mix where "key" is a string conforming to BCP-47 that specifies the language for the "value" string. "key" must be the same as the ones in all sub-mix element’s annotationss E.g. to create an scalable 5.1 IAMF file from several WAV input files ffmpeg -i front.wav -i back.wav -i center.wav -i lfe.wav -map 0:0 -map 1:0 -map 2:0 -map 3:0 -c:a opus -stream\_group type=iamf\_audio\_element:id=1:st=0:st=1:st=2:st=3, demixing=parameter\_id=998, recon\_gain=parameter\_id=101, layer=ch\_layout=stereo, layer=ch\_layout=5.1(side), -stream\_group type=iamf\_mix\_presentation:id=2:stg=0:annotations=en-us=Mix\_Presentation, submix=parameter\_id=100:parameter\_rate=48000|element=stg=0:parameter\_id=100:annotations=en-us=Scalable\_Submix|layout=sound\_system=stereo|layout=sound\_system=5.1(side) -streamid 0:0 -streamid 1:1 -streamid 2:2 -streamid 3:3 output.iamf To copy the two stream groups (Audio Element and Mix Presentation) from an input IAMF file with four streams into an mp4 output ffmpeg -i input.iamf -c:a copy -stream\_group map=0=0:st=0:st=1:st=2:st=3 -stream\_group map=0=1:stg=0 -streamid 0:0 -streamid 1:1 -streamid 2:2 -streamid 3:3 output.mp4 \-target type (_output_) Specify target file type (`vcd`, `svcd`, `dvd`, `dv`, `dv50`). type may be prefixed with `pal-`, `ntsc-` or `film-` to use the corresponding standard. All the format options (bitrate, codecs, buffer sizes) are then set automatically. You can just type: ffmpeg -i myfile.avi -target vcd /tmp/vcd.mpg Nevertheless you can specify additional options as long as you know they do not conflict with the standard, as in: ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg The parameters set for each target are as follows. **VCD** pal: -f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324 -s 352x288 -r 25 -codec:v mpeg1video -g 15 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680 -ar 44100 -ac 2 -codec:a mp2 -b:a 224k ntsc: -f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324 -s 352x240 -r 30000/1001 -codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680 -ar 44100 -ac 2 -codec:a mp2 -b:a 224k film: -f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324 -s 352x240 -r 24000/1001 -codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680 -ar 44100 -ac 2 -codec:a mp2 -b:a 224k **SVCD** pal: -f svcd -packetsize 2324 -s 480x576 -pix\_fmt yuv420p -r 25 -codec:v mpeg2video -g 15 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan\_offset 1 -ar 44100 -codec:a mp2 -b:a 224k ntsc: -f svcd -packetsize 2324 -s 480x480 -pix\_fmt yuv420p -r 30000/1001 -codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan\_offset 1 -ar 44100 -codec:a mp2 -b:a 224k film: -f svcd -packetsize 2324 -s 480x480 -pix\_fmt yuv420p -r 24000/1001 -codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan\_offset 1 -ar 44100 -codec:a mp2 -b:a 224k **DVD** pal: -f dvd -muxrate 10080k -packetsize 2048 -s 720x576 -pix\_fmt yuv420p -r 25 -codec:v mpeg2video -g 15 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008 -ar 48000 -codec:a ac3 -b:a 448k ntsc: -f dvd -muxrate 10080k -packetsize 2048 -s 720x480 -pix\_fmt yuv420p -r 30000/1001 -codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008 -ar 48000 -codec:a ac3 -b:a 448k film: -f dvd -muxrate 10080k -packetsize 2048 -s 720x480 -pix\_fmt yuv420p -r 24000/1001 -codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008 -ar 48000 -codec:a ac3 -b:a 448k **DV** pal: -f dv -s 720x576 -pix\_fmt yuv420p -r 25 -ar 48000 -ac 2 ntsc: -f dv -s 720x480 -pix\_fmt yuv411p -r 30000/1001 -ar 48000 -ac 2 film: -f dv -s 720x480 -pix\_fmt yuv411p -r 24000/1001 -ar 48000 -ac 2 The `dv50` target is identical to the `dv` target except that the pixel format set is `yuv422p` for all three standards. Any user-set value for a parameter above will override the target preset value. In that case, the output may not comply with the target standard. \-dn (_input/output_) As an input option, blocks all data streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables data recording i.e. automatic selection or mapping of any data stream. For full manual control see the `-map` option. \-dframes number (_output_) Set the number of data frames to output. This is an obsolete alias for `-frames:d`, which you should use instead. \-frames\[:stream\_specifier\] framecount (_output,per-stream_) Stop writing to the stream after framecount frames. \-q\[:stream\_specifier\] q (_output,per-stream_) \-qscale\[:stream\_specifier\] q (_output,per-stream_) Use fixed quality scale (VBR). The meaning of q/qscale is codec-dependent. If qscale is used without a stream\_specifier then it applies only to the video stream, this is to maintain compatibility with previous behavior and as specifying the same codec specific value to 2 different codecs that is audio and video generally is not what is intended when no stream\_specifier is used. \-filter\[:stream\_specifier\] filtergraph (_output,per-stream_) Create the filtergraph specified by filtergraph and use it to filter the stream. filtergraph is a description of the filtergraph to apply to the stream, and must have a single input and a single output of the same type of the stream. In the filtergraph, the input is associated to the label `in`, and the output to the label `out`. See the ffmpeg-filters manual for more information about the filtergraph syntax. See the \-filter\_complex option if you want to create filtergraphs with multiple inputs and/or outputs. \-reinit\_filter\[:stream\_specifier\] integer (_input,per-stream_) This boolean option determines if the filtergraph(s) to which this stream is fed gets reinitialized when input frame parameters change mid-stream. This option is enabled by default as most video and all audio filters cannot handle deviation in input frame properties. Upon reinitialization, existing filter state is lost, like e.g. the frame count `n` reference available in some filters. Any frames buffered at time of reinitialization are lost. The properties where a change triggers reinitialization are, for video, frame resolution or pixel format; for audio, sample format, sample rate, channel count or channel layout. \-drop\_changed\[:stream\_specifier\] integer (_input,per-stream_) This boolean option determines whether a frame with differing frame parameters mid-stream gets dropped instead of leading to filtergraph reinitialization, as that would lead to loss of filter state. Generally useful to avoid corrupted yet decodable packets in live streaming inputs. Default is false. \-filter\_threads nb\_threads (_global_) Defines how many threads are used to process a filter pipeline. Each pipeline will produce a thread pool with this many threads available for parallel processing. The default is the number of available CPUs. \-pre\[:stream\_specifier\] preset\_name (_output,per-stream_) Specify the preset for matching stream(s). \-stats (_global_) Log encoding progress/statistics as "info"-level log (see `-loglevel`). It is on by default, to explicitly disable it you need to specify `-nostats`. \-stats\_period time (_global_) Set period at which encoding progress/statistics are updated. Default is 0.5 seconds. \-progress url (_global_) Send program-friendly progress information to url. Progress information is written periodically and at the end of the encoding process. It is made of "key\=value" lines. key consists of only alphanumeric characters. The last key of a sequence of progress information is always "progress" with the value "continue" or "end". The update period is set using `-stats_period`. For example, log progress information to stdout: ffmpeg -progress pipe:1 -i in.mkv out.mkv \-stdin Enable interaction on standard input. On by default unless standard input is used as an input. To explicitly disable interaction you need to specify `-nostdin`. Disabling interaction on standard input is useful, for example, if ffmpeg is in the background process group. Roughly the same result can be achieved with `ffmpeg ... < /dev/null` but it requires a shell. \-debug\_ts (_global_) Print timestamp/latency information. It is off by default. This option is mostly useful for testing and debugging purposes, and the output format may change from one version to another, so it should not be employed by portable scripts. See also the option `-fdebug ts`. \-attach filename (_output_) Add an attachment to the output file. This is supported by a few formats like Matroska for e.g. fonts used in rendering subtitles. Attachments are implemented as a specific type of stream, so this option will add a new stream to the file. It is then possible to use per-stream options on this stream in the usual way. Attachment streams created with this option will be created after all the other streams (i.e. those created with `-map` or automatic mappings). Note that for Matroska you also have to set the mimetype metadata tag: ffmpeg -i INPUT -attach DejaVuSans.ttf -metadata:s:2 mimetype=application/x-truetype-font out.mkv (assuming that the attachment stream will be third in the output file). \-dump\_attachment\[:stream\_specifier\] filename (_input,per-stream_) Extract the matching attachment stream into a file named filename. If filename is empty, then the value of the `filename` metadata tag will be used. E.g. to extract the first attachment to a file named ’out.ttf’: ffmpeg -dump\_attachment:t:0 out.ttf -i INPUT To extract all attachments to files determined by the `filename` tag: ffmpeg -dump\_attachment:t "" -i INPUT Technical note – attachments are implemented as codec extradata, so this option can actually be used to extract extradata from any stream, not just attachments. ### 5.5 Video Options \-vframes number (_output_) Set the number of video frames to output. This is an obsolete alias for `-frames:v`, which you should use instead. \-r\[:stream\_specifier\] fps (_input/output,per-stream_) Set frame rate (Hz value, fraction or abbreviation). As an input option, ignore any timestamps stored in the file and instead generate timestamps assuming constant frame rate fps. This is not the same as the \-framerate option used for some input formats like image2 or v4l2 (it used to be the same in older versions of FFmpeg). If in doubt use \-framerate instead of the input option \-r. As an output option: video encoding Duplicate or drop frames right before encoding them to achieve constant output frame rate fps. video streamcopy Indicate to the muxer that fps is the stream frame rate. No data is dropped or duplicated in this case. This may produce invalid files if fps does not match the actual stream frame rate as determined by packet timestamps. See also the `setts` bitstream filter. \-fpsmax\[:stream\_specifier\] fps (_output,per-stream_) Set maximum frame rate (Hz value, fraction or abbreviation). Clamps output frame rate when output framerate is auto-set and is higher than this value. Useful in batch processing or when input framerate is wrongly detected as very high. It cannot be set together with `-r`. It is ignored during streamcopy. \-s\[:stream\_specifier\] size (_input/output,per-stream_) Set frame size. As an input option, this is a shortcut for the video\_size private option, recognized by some demuxers for which the frame size is either not stored in the file or is configurable – e.g. raw video or video grabbers. As an output option, this inserts the `scale` video filter to the _end_ of the corresponding filtergraph. Please use the `scale` filter directly to insert it at the beginning or some other place. The format is ‘wxh’ (default - same as source). \-aspect\[:stream\_specifier\] aspect (_output,per-stream_) Set the video display aspect ratio specified by aspect. aspect can be a floating point number string, or a string of the form num:den, where num and den are the numerator and denominator of the aspect ratio. For example "4:3", "16:9", "1.3333", and "1.7777" are valid argument values. If used together with \-vcodec copy, it will affect the aspect ratio stored at container level, but not the aspect ratio stored in encoded frames, if it exists. \-display\_rotation\[:stream\_specifier\] rotation (_input,per-stream_) Set video rotation metadata. rotation is a decimal number specifying the amount in degree by which the video should be rotated counter-clockwise before being displayed. This option overrides the rotation/display transform metadata stored in the file, if any. When the video is being transcoded (rather than copied) and `-autorotate` is enabled, the video will be rotated at the filtering stage. Otherwise, the metadata will be written into the output file if the muxer supports it. If the `-display_hflip` and/or `-display_vflip` options are given, they are applied after the rotation specified by this option. \-display\_hflip\[:stream\_specifier\] (_input,per-stream_) Set whether on display the image should be horizontally flipped. See the `-display_rotation` option for more details. \-display\_vflip\[:stream\_specifier\] (_input,per-stream_) Set whether on display the image should be vertically flipped. See the `-display_rotation` option for more details. \-vn (_input/output_) As an input option, blocks all video streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables video recording i.e. automatic selection or mapping of any video stream. For full manual control see the `-map` option. \-vcodec codec (_output_) Set the video codec. This is an alias for `-codec:v`. \-pass\[:stream\_specifier\] n (_output,per-stream_) Select the pass number (1 or 2). It is used to do two-pass video encoding. The statistics of the video are recorded in the first pass into a log file (see also the option -passlogfile), and in the second pass that log file is used to generate the video at the exact requested bitrate. On pass 1, you may just deactivate audio and set output to null, examples for Windows and Unix: ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y NUL ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y /dev/null \-passlogfile\[:stream\_specifier\] prefix (_output,per-stream_) Set two-pass log file name prefix to prefix, the default file name prefix is “ffmpeg2pass”. The complete file name will be PREFIX-N.log, where N is a number specific to the output stream \-vf filtergraph (_output_) Create the filtergraph specified by filtergraph and use it to filter the stream. This is an alias for `-filter:v`, see the \-filter option. \-autorotate Automatically rotate the video according to file metadata. Enabled by default, use \-noautorotate to disable it. \-autoscale Automatically scale the video according to the resolution of first frame. Enabled by default, use \-noautoscale to disable it. When autoscale is disabled, all output frames of filter graph might not be in the same resolution and may be inadequate for some encoder/muxer. Therefore, it is not recommended to disable it unless you really know what you are doing. Disable autoscale at your own risk. ### 5.6 Advanced Video options \-pix\_fmt\[:stream\_specifier\] format (_input/output,per-stream_) Set pixel format. Use `-pix_fmts` to show all the supported pixel formats. If the selected pixel format can not be selected, ffmpeg will print a warning and select the best pixel format supported by the encoder. If pix\_fmt is prefixed by a `+`, ffmpeg will exit with an error if the requested pixel format can not be selected, and automatic conversions inside filtergraphs are disabled. If pix\_fmt is a single `+`, ffmpeg selects the same pixel format as the input (or graph output) and automatic conversions are disabled. \-sws\_flags flags (_input/output_) Set default flags for the libswscale library. These flags are used by automatically inserted `scale` filters and those within simple filtergraphs, if not overridden within the filtergraph definition. See the (ffmpeg-scaler)ffmpeg-scaler manual for a list of scaler options. \-rc\_override\[:stream\_specifier\] override (_output,per-stream_) Rate control override for specific intervals, formatted as "int,int,int" list separated with slashes. Two first values are the beginning and end frame numbers, last one is quantizer to use if positive, or quality factor if negative. \-vstats Dump video coding statistics to vstats\_HHMMSS.log. See the vstats file format section for the format description. \-vstats\_file file Dump video coding statistics to file. See the vstats file format section for the format description. \-vstats\_version file Specify which version of the vstats format to use. Default is `2`. See the vstats file format section for the format description. \-vtag fourcc/tag (_output_) Force video tag/fourcc. This is an alias for `-tag:v`. \-force\_key\_frames\[:stream\_specifier\] time\[,time...\] (_output,per-stream_) \-force\_key\_frames\[:stream\_specifier\] expr:expr (_output,per-stream_) \-force\_key\_frames\[:stream\_specifier\] source (_output,per-stream_) force\_key\_frames can take arguments of the following form: time\[,time...\] If the argument consists of timestamps, ffmpeg will round the specified times to the nearest output timestamp as per the encoder time base and force a keyframe at the first frame having timestamp equal or greater than the computed timestamp. Note that if the encoder time base is too coarse, then the keyframes may be forced on frames with timestamps lower than the specified time. The default encoder time base is the inverse of the output framerate but may be set otherwise via `-enc_time_base`. If one of the times is "`chapters`\[delta\]", it is expanded into the time of the beginning of all chapters in the file, shifted by delta, expressed as a time in seconds. This option can be useful to ensure that a seek point is present at a chapter mark or any other designated place in the output file. For example, to insert a key frame at 5 minutes, plus key frames 0.1 second before the beginning of every chapter: \-force\_key\_frames 0:05:00,chapters-0.1 expr:expr If the argument is prefixed with `expr:`, the string expr is interpreted like an expression and is evaluated for each frame. A key frame is forced in case the evaluation is non-zero. The expression in expr can contain the following constants: n the number of current processed frame, starting from 0 n\_forced the number of forced frames prev\_forced\_n the number of the previous forced frame, it is `NAN` when no keyframe was forced yet prev\_forced\_t the time of the previous forced frame, it is `NAN` when no keyframe was forced yet t the time of the current processed frame For example to force a key frame every 5 seconds, you can specify: \-force\_key\_frames expr:gte(t,n\_forced\*5) To force a key frame 5 seconds after the time of the last forced one, starting from second 13: \-force\_key\_frames expr:if(isnan(prev\_forced\_t),gte(t,13),gte(t,prev\_forced\_t+5)) source If the argument is `source`, ffmpeg will force a key frame if the current frame being encoded is marked as a key frame in its source. In cases where this particular source frame has to be dropped, enforce the next available frame to become a key frame instead. Note that forcing too many keyframes is very harmful for the lookahead algorithms of certain encoders: using fixed-GOP options or similar would be more efficient. \-apply\_cropping\[:stream\_specifier\] source (_input,per-stream_) Automatically crop the video after decoding according to file metadata. Default is _all_. none (0) Don’t apply any cropping metadata. all (1) Apply both codec and container level croppping. This is the default mode. codec (2) Apply codec level croppping. container (3) Apply container level croppping. \-copyinkf\[:stream\_specifier\] (_output,per-stream_) When doing stream copy, copy also non-key frames found at the beginning. \-init\_hw\_device type\[=name\]\[:device\[,key=value...\]\] Initialise a new hardware device of type type called name, using the given device parameters. If no name is specified it will receive a default name of the form "type%d". The meaning of device and the following arguments depends on the device type: cuda device is the number of the CUDA device. The following options are recognized: primary\_ctx If set to 1, uses the primary device context instead of creating a new one. Examples: _\-init\_hw\_device cuda:1_ Choose the second device on the system. _\-init\_hw\_device cuda:0,primary\_ctx=1_ Choose the first device and use the primary device context. dxva2 device is the number of the Direct3D 9 display adapter. d3d11va device is the number of the Direct3D 11 display adapter. If not specified, it will attempt to use the default Direct3D 11 display adapter or the first Direct3D 11 display adapter whose hardware VendorId is specified by ‘vendor\_id’. Examples: _\-init\_hw\_device d3d11va_ Create a d3d11va device on the default Direct3D 11 display adapter. _\-init\_hw\_device d3d11va:1_ Create a d3d11va device on the Direct3D 11 display adapter specified by index 1. _\-init\_hw\_device d3d11va:,vendor\_id=0x8086_ Create a d3d11va device on the first Direct3D 11 display adapter whose hardware VendorId is 0x8086. vaapi device is either an X11 display name, a DRM render node or a DirectX adapter index. If not specified, it will attempt to open the default X11 display (_$DISPLAY_) and then the first DRM render node (_/dev/dri/renderD128_), or the default DirectX adapter on Windows. The following options are recognized: kernel\_driver When device is not specified, use this option to specify the name of the kernel driver associated with the desired device. This option is available only when the hardware acceleration method _drm_ and _vaapi_ are enabled. vendor\_id When device and kernel\_driver are not specified, use this option to specify the vendor id associated with the desired device. This option is available only when the hardware acceleration method _drm_ and _vaapi_ are enabled and _kernel\_driver_ is not specified. Examples: _\-init\_hw\_device vaapi_ Create a vaapi device on the default device. _\-init\_hw\_device vaapi:/dev/dri/renderD129_ Create a vaapi device on DRM render node /dev/dri/renderD129. _\-init\_hw\_device vaapi:1_ Create a vaapi device on DirectX adapter 1. _\-init\_hw\_device vaapi:,kernel\_driver=i915_ Create a vaapi device on a device associated with kernel driver ‘i915’. _\-init\_hw\_device vaapi:,vendor\_id=0x8086_ Create a vaapi device on a device associated with vendor id ‘0x8086’. vdpau device is an X11 display name. If not specified, it will attempt to open the default X11 display (_$DISPLAY_). qsv device selects a value in ‘MFX\_IMPL\_\*’. Allowed values are: auto sw hw auto\_any hw\_any hw2 hw3 hw4 If not specified, ‘auto\_any’ is used. (Note that it may be easier to achieve the desired result for QSV by creating the platform-appropriate subdevice (‘dxva2’ or ‘d3d11va’ or ‘vaapi’) and then deriving a QSV device from that.) The following options are recognized: child\_device Specify a DRM render node on Linux or DirectX adapter on Windows. child\_device\_type Choose platform-appropriate subdevice type. On Windows ‘d3d11va’ is used as default subdevice type when `--enable-libvpl` is specified at configuration time, ‘dxva2’ is used as default subdevice type when `--enable-libmfx` is specified at configuration time. On Linux user can use ‘vaapi’ only as subdevice type. Examples: _\-init\_hw\_device qsv:hw,child\_device=/dev/dri/renderD129_ Create a QSV device with ‘MFX\_IMPL\_HARDWARE’ on DRM render node /dev/dri/renderD129. _\-init\_hw\_device qsv:hw,child\_device=1_ Create a QSV device with ‘MFX\_IMPL\_HARDWARE’ on DirectX adapter 1. _\-init\_hw\_device qsv:hw,child\_device\_type=d3d11va_ Choose the GPU subdevice with type ‘d3d11va’ and create QSV device with ‘MFX\_IMPL\_HARDWARE’. _\-init\_hw\_device qsv:hw,child\_device\_type=dxva2_ Choose the GPU subdevice with type ‘dxva2’ and create QSV device with ‘MFX\_IMPL\_HARDWARE’. _\-init\_hw\_device qsv:hw,child\_device=1,child\_device\_type=d3d11va_ Create a QSV device with ‘MFX\_IMPL\_HARDWARE’ on DirectX adapter 1 with subdevice type ‘d3d11va’. _\-init\_hw\_device vaapi=va:/dev/dri/renderD129 -init\_hw\_device qsv=hw1@va_ Create a VAAPI device called ‘va’ on /dev/dri/renderD129, then derive a QSV device called ‘hw1’ from device ‘va’. opencl device selects the platform and device as _platform\_index.device\_index_. The set of devices can also be filtered using the key-value pairs to find only devices matching particular platform or device strings. The strings usable as filters are: platform\_profile platform\_version platform\_name platform\_vendor platform\_extensions device\_name device\_vendor driver\_version device\_version device\_profile device\_extensions device\_type The indices and filters must together uniquely select a device. Examples: _\-init\_hw\_device opencl:0.1_ Choose the second device on the first platform. _\-init\_hw\_device opencl:,device\_name=Foo9000_ Choose the device with a name containing the string _Foo9000_. _\-init\_hw\_device opencl:1,device\_type=gpu,device\_extensions=cl\_khr\_fp16_ Choose the GPU device on the second platform supporting the _cl\_khr\_fp16_ extension. vulkan If device is an integer, it selects the device by its index in a system-dependent list of devices. If device is any other string, it selects the first device with a name containing that string as a substring. The following options are recognized: debug If set to 1, enables the validation layer, if installed. linear\_images If set to 1, images allocated by the hwcontext will be linear and locally mappable. instance\_extensions A plus separated list of additional instance extensions to enable. device\_extensions A plus separated list of additional device extensions to enable. Examples: _\-init\_hw\_device vulkan:1_ Choose the second device on the system. _\-init\_hw\_device vulkan:RADV_ Choose the first device with a name containing the string _RADV_. _\-init\_hw\_device vulkan:0,instance\_extensions=VK\_KHR\_wayland\_surface+VK\_KHR\_xcb\_surface_ Choose the first device and enable the Wayland and XCB instance extensions. \-init\_hw\_device type\[=name\]@source Initialise a new hardware device of type type called name, deriving it from the existing device with the name source. \-init\_hw\_device list List all hardware device types supported in this build of ffmpeg. \-filter\_hw\_device name Pass the hardware device called name to all filters in any filter graph. This can be used to set the device to upload to with the `hwupload` filter, or the device to map to with the `hwmap` filter. Other filters may also make use of this parameter when they require a hardware device. Note that this is typically only required when the input is not already in hardware frames - when it is, filters will derive the device they require from the context of the frames they receive as input. This is a global setting, so all filters will receive the same device. \-hwaccel\[:stream\_specifier\] hwaccel (_input,per-stream_) Use hardware acceleration to decode the matching stream(s). The allowed values of hwaccel are: none Do not use any hardware acceleration (the default). auto Automatically select the hardware acceleration method. vdpau Use VDPAU (Video Decode and Presentation API for Unix) hardware acceleration. dxva2 Use DXVA2 (DirectX Video Acceleration) hardware acceleration. d3d11va Use D3D11VA (DirectX Video Acceleration) hardware acceleration. vaapi Use VAAPI (Video Acceleration API) hardware acceleration. qsv Use the Intel QuickSync Video acceleration for video transcoding. Unlike most other values, this option does not enable accelerated decoding (that is used automatically whenever a qsv decoder is selected), but accelerated transcoding, without copying the frames into the system memory. For it to work, both the decoder and the encoder must support QSV acceleration and no filters must be used. videotoolbox Use Video Toolbox hardware acceleration. This option has no effect if the selected hwaccel is not available or not supported by the chosen decoder. Note that most acceleration methods are intended for playback and will not be faster than software decoding on modern CPUs. Additionally, `ffmpeg` will usually need to copy the decoded frames from the GPU memory into the system memory, resulting in further performance loss. This option is thus mainly useful for testing. \-hwaccel\_device\[:stream\_specifier\] hwaccel\_device (_input,per-stream_) Select a device to use for hardware acceleration. This option only makes sense when the \-hwaccel option is also specified. It can either refer to an existing device created with \-init\_hw\_device by name, or it can create a new device as if ‘\-init\_hw\_device’ type:hwaccel\_device were called immediately before. \-hwaccels List all hardware acceleration components enabled in this build of ffmpeg. Actual runtime availability depends on the hardware and its suitable driver being installed. \-fix\_sub\_duration\_heartbeat\[:stream\_specifier\] Set a specific output video stream as the heartbeat stream according to which to split and push through currently in-progress subtitle upon receipt of a random access packet. This lowers the latency of subtitles for which the end packet or the following subtitle has not yet been received. As a drawback, this will most likely lead to duplication of subtitle events in order to cover the full duration, so when dealing with use cases where latency of when the subtitle event is passed on to output is not relevant this option should not be utilized. Requires \-fix\_sub\_duration to be set for the relevant input subtitle stream for this to have any effect, as well as for the input subtitle stream having to be directly mapped to the same output in which the heartbeat stream resides. ### 5.7 Audio Options \-aframes number (_output_) Set the number of audio frames to output. This is an obsolete alias for `-frames:a`, which you should use instead. \-ar\[:stream\_specifier\] freq (_input/output,per-stream_) Set the audio sampling frequency. For output streams it is set by default to the frequency of the corresponding input stream. For input streams this option only makes sense for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer options. \-aq q (_output_) Set the audio quality (codec-specific, VBR). This is an alias for -q:a. \-ac\[:stream\_specifier\] channels (_input/output,per-stream_) Set the number of audio channels. For output streams it is set by default to the number of input audio channels. For input streams this option only makes sense for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer options. \-an (_input/output_) As an input option, blocks all audio streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables audio recording i.e. automatic selection or mapping of any audio stream. For full manual control see the `-map` option. \-acodec codec (_input/output_) Set the audio codec. This is an alias for `-codec:a`. \-sample\_fmt\[:stream\_specifier\] sample\_fmt (_output,per-stream_) Set the audio sample format. Use `-sample_fmts` to get a list of supported sample formats. \-af filtergraph (_output_) Create the filtergraph specified by filtergraph and use it to filter the stream. This is an alias for `-filter:a`, see the \-filter option. ### 5.8 Advanced Audio options \-atag fourcc/tag (_output_) Force audio tag/fourcc. This is an alias for `-tag:a`. \-ch\_layout\[:stream\_specifier\] layout (_input/output,per-stream_) Alias for `-channel_layout`. \-channel\_layout\[:stream\_specifier\] layout (_input/output,per-stream_) Set the audio channel layout. For output streams it is set by default to the input channel layout. For input streams it overrides the channel layout of the input. Not all decoders respect the overridden channel layout. This option also sets the channel layout for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer option. \-guess\_layout\_max channels (_input,per-stream_) If some input channel layout is not known, try to guess only if it corresponds to at most the specified number of channels. For example, 2 tells to `ffmpeg` to recognize 1 channel as mono and 2 channels as stereo but not 6 channels as 5.1. The default is to always try to guess. Use 0 to disable all guessing. Using the `-channel_layout` option to explicitly specify an input layout also disables guessing. ### 5.9 Subtitle options \-scodec codec (_input/output_) Set the subtitle codec. This is an alias for `-codec:s`. \-sn (_input/output_) As an input option, blocks all subtitle streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables subtitle recording i.e. automatic selection or mapping of any subtitle stream. For full manual control see the `-map` option. ### 5.10 Advanced Subtitle options \-fix\_sub\_duration Fix subtitles durations. For each subtitle, wait for the next packet in the same stream and adjust the duration of the first to avoid overlap. This is necessary with some subtitles codecs, especially DVB subtitles, because the duration in the original packet is only a rough estimate and the end is actually marked by an empty subtitle frame. Failing to use this option when necessary can result in exaggerated durations or muxing failures due to non-monotonic timestamps. Note that this option will delay the output of all data until the next subtitle packet is decoded: it may increase memory consumption and latency a lot. \-canvas\_size size Set the size of the canvas used to render subtitles. ### 5.11 Advanced options \-map \[-\]input\_file\_id\[:stream\_specifier\]\[:view\_specifier\]\[:?\] | \[linklabel\] (_output_) Create one or more streams in the output file. This option has two forms for specifying the data source(s): the first selects one or more streams from some input file (specified with `-i`), the second takes an output from some complex filtergraph (specified with `-filter_complex`). In the first form, an output stream is created for every stream from the input file with the index input\_file\_id. If stream\_specifier is given, only those streams that match the specifier are used (see the Stream specifiers section for the stream\_specifier syntax). A `-` character before the stream identifier creates a "negative" mapping. It disables matching streams from already created mappings. An optional view\_specifier may be given after the stream specifier, which for multiview video specifies the view to be used. The view specifier may have one of the following formats: view:view\_id select a view by its ID; view\_id may be set to ’all’ to use all the views interleaved into one stream; vidx:view\_idx select a view by its index; i.e. 0 is the base view, 1 is the first non-base view, etc. vpos:position select a view by its display position; position may be `left` or `right` The default for transcoding is to only use the base view, i.e. the equivalent of `vidx:0`. For streamcopy, view specifiers are not supported and all views are always copied. A trailing `?` after the stream index will allow the map to be optional: if the map matches no streams the map will be ignored instead of failing. Note the map will still fail if an invalid input file index is used; such as if the map refers to a non-existent input. An alternative \[linklabel\] form will map outputs from complex filter graphs (see the \-filter\_complex option) to the output file. linklabel must correspond to a defined output link label in the graph. This option may be specified multiple times, each adding more streams to the output file. Any given input stream may also be mapped any number of times as a source for different output streams, e.g. in order to use different encoding options and/or filters. The streams are created in the output in the same order in which the `-map` options are given on the commandline. Using this option disables the default mappings for this output file. Examples: _map everything_ To map ALL streams from the first input file to output ffmpeg -i INPUT -map 0 output _select specific stream_ If you have two audio streams in the first input file, these streams are identified by 0:0 and 0:1. You can use `-map` to select which streams to place in an output file. For example: ffmpeg -i INPUT -map 0:1 out.wav will map the second input stream in INPUT to the (single) output stream in out.wav. _create multiple streams_ To select the stream with index 2 from input file a.mov (specified by the identifier 0:2), and stream with index 6 from input b.mov (specified by the identifier 1:6), and copy them to the output file out.mov: ffmpeg -i a.mov -i b.mov -c copy -map 0:2 -map 1:6 out.mov _create multiple streams 2_ To select all video and the third audio stream from an input file: ffmpeg -i INPUT -map 0:v -map 0:a:2 OUTPUT _negative map_ To map all the streams except the second audio, use negative mappings ffmpeg -i INPUT -map 0 -map -0:a:1 OUTPUT _optional map_ To map the video and audio streams from the first input, and using the trailing `?`, ignore the audio mapping if no audio streams exist in the first input: ffmpeg -i INPUT -map 0:v -map 0:a? OUTPUT _map by language_ To pick the English audio stream: ffmpeg -i INPUT -map 0:m:language:eng OUTPUT \-ignore\_unknown Ignore input streams with unknown type instead of failing if copying such streams is attempted. \-copy\_unknown Allow input streams with unknown type to be copied instead of failing if copying such streams is attempted. \-map\_metadata\[:metadata\_spec\_out\] infile\[:metadata\_spec\_in\] (_output,per-metadata_) Set metadata information of the next output file from infile. Note that those are file indices (zero-based), not filenames. Optional metadata\_spec\_in/out parameters specify, which metadata to copy. A metadata specifier can have the following forms: g global metadata, i.e. metadata that applies to the whole file s\[:stream\_spec\] per-stream metadata. stream\_spec is a stream specifier as described in the Stream specifiers chapter. In an input metadata specifier, the first matching stream is copied from. In an output metadata specifier, all matching streams are copied to. c:chapter\_index per-chapter metadata. chapter\_index is the zero-based chapter index. p:program\_index per-program metadata. program\_index is the zero-based program index. If metadata specifier is omitted, it defaults to global. By default, global metadata is copied from the first input file, per-stream and per-chapter metadata is copied along with streams/chapters. These default mappings are disabled by creating any mapping of the relevant type. A negative file index can be used to create a dummy mapping that just disables automatic copying. For example to copy metadata from the first stream of the input file to global metadata of the output file: ffmpeg -i in.ogg -map\_metadata 0:s:0 out.mp3 To do the reverse, i.e. copy global metadata to all audio streams: ffmpeg -i in.mkv -map\_metadata:s:a 0:g out.mkv Note that simple `0` would work as well in this example, since global metadata is assumed by default. \-map\_chapters input\_file\_index (_output_) Copy chapters from input file with index input\_file\_index to the next output file. If no chapter mapping is specified, then chapters are copied from the first input file with at least one chapter. Use a negative file index to disable any chapter copying. \-benchmark (_global_) Show benchmarking information at the end of an encode. Shows real, system and user time used and maximum memory consumption. Maximum memory consumption is not supported on all systems, it will usually display as 0 if not supported. \-benchmark\_all (_global_) Show benchmarking information during the encode. Shows real, system and user time used in various steps (audio/video encode/decode). \-timelimit duration (_global_) Exit after ffmpeg has been running for duration seconds in CPU user time. \-dump (_global_) Dump each input packet to stderr. \-hex (_global_) When dumping packets, also dump the payload. \-readrate speed (_input_) Limit input read speed. Its value is a floating-point positive number which represents the maximum duration of media, in seconds, that should be ingested in one second of wallclock time. Default value is zero and represents no imposed limitation on speed of ingestion. Value `1` represents real-time speed and is equivalent to `-re`. Mainly used to simulate a capture device or live input stream (e.g. when reading from a file). Should not be used with a low value when input is an actual capture device or live stream as it may cause packet loss. It is useful for when flow speed of output packets is important, such as live streaming. \-re (_input_) Read input at native frame rate. This is equivalent to setting `-readrate 1`. \-readrate\_initial\_burst seconds Set an initial read burst time, in seconds, after which \-re/-readrate will be enforced. \-readrate\_catchup speed (_input_) If either the input or output is blocked leading to actual read speed falling behind the specified readrate, then this rate takes effect till the input catches up with the specified readrate. Must not be lower than the primary readrate. \-vsync parameter (_global_) \-fps\_mode\[:stream\_specifier\] parameter (_output,per-stream_) Set video sync method / framerate mode. vsync is applied to all output video streams but can be overridden for a stream by setting fps\_mode. vsync is deprecated and will be removed in the future. For compatibility reasons some of the values for vsync can be specified as numbers (shown in parentheses in the following table). passthrough (0) Each frame is passed with its timestamp from the demuxer to the muxer. cfr (1) Frames will be duplicated and dropped to achieve exactly the requested constant frame rate. vfr (2) Frames are passed through with their timestamp or dropped so as to prevent 2 frames from having the same timestamp. auto (-1) Chooses between cfr and vfr depending on muxer capabilities. This is the default method. Note that the timestamps may be further modified by the muxer, after this. For example, in the case that the format option avoid\_negative\_ts is enabled. With -map you can select from which stream the timestamps should be taken. You can leave either video or audio unchanged and sync the remaining stream(s) to the unchanged one. \-frame\_drop\_threshold parameter Frame drop threshold, which specifies how much behind video frames can be before they are dropped. In frame rate units, so 1.0 is one frame. The default is -1.1. One possible usecase is to avoid framedrops in case of noisy timestamps or to increase frame drop precision in case of exact timestamps. \-apad parameters (_output,per-stream_) Pad the output audio stream(s). This is the same as applying `-af apad`. Argument is a string of filter parameters composed the same as with the `apad` filter. `-shortest` must be set for this output for the option to take effect. \-copyts Do not process input timestamps, but keep their values without trying to sanitize them. In particular, do not remove the initial start time offset value. Note that, depending on the vsync option or on specific muxer processing (e.g. in case the format option avoid\_negative\_ts is enabled) the output timestamps may mismatch with the input timestamps even when this option is selected. \-start\_at\_zero When used with copyts, shift input timestamps so they start at zero. This means that using e.g. `-ss 50` will make output timestamps start at 50 seconds, regardless of what timestamp the input file started at. \-copytb mode Specify how to set the encoder timebase when stream copying. mode is an integer numeric value, and can assume one of the following values: 1 Use the demuxer timebase. The time base is copied to the output encoder from the corresponding input demuxer. This is sometimes required to avoid non monotonically increasing timestamps when copying video streams with variable frame rate. 0 Use the decoder timebase. The time base is copied to the output encoder from the corresponding input decoder. \-1 Try to make the choice automatically, in order to generate a sane output. Default value is -1. \-enc\_time\_base\[:stream\_specifier\] timebase (_output,per-stream_) Set the encoder timebase. timebase can assume one of the following values: 0 Assign a default value according to the media type. For video - use 1/framerate, for audio - use 1/samplerate. demux Use the timebase from the demuxer. filter Use the timebase from the filtergraph. a positive number Use the provided number as the timebase. This field can be provided as a ratio of two integers (e.g. 1:24, 1:48000) or as a decimal number (e.g. 0.04166, 2.0833e-5) Default value is 0. \-bitexact (_input/output_) Enable bitexact mode for (de)muxer and (de/en)coder \-shortest (_output_) Finish encoding when the shortest output stream ends. Note that this option may require buffering frames, which introduces extra latency. The maximum amount of this latency may be controlled with the `-shortest_buf_duration` option. \-shortest\_buf\_duration duration (_output_) The `-shortest` option may require buffering potentially large amounts of data when at least one of the streams is "sparse" (i.e. has large gaps between frames – this is typically the case for subtitles). This option controls the maximum duration of buffered frames in seconds. Larger values may allow the `-shortest` option to produce more accurate results, but increase memory use and latency. The default value is 10 seconds. \-dts\_delta\_threshold threshold Timestamp discontinuity delta threshold, expressed as a decimal number of seconds. The timestamp discontinuity correction enabled by this option is only applied to input formats accepting timestamp discontinuity (for which the `AVFMT_TS_DISCONT` flag is enabled), e.g. MPEG-TS and HLS, and is automatically disabled when employing the `-copyts` option (unless wrapping is detected). If a timestamp discontinuity is detected whose absolute value is greater than threshold, ffmpeg will remove the discontinuity by decreasing/increasing the current DTS and PTS by the corresponding delta value. The default value is 10. \-dts\_error\_threshold threshold Timestamp error delta threshold, expressed as a decimal number of seconds. The timestamp correction enabled by this option is only applied to input formats not accepting timestamp discontinuity (for which the `AVFMT_TS_DISCONT` flag is not enabled). If a timestamp discontinuity is detected whose absolute value is greater than threshold, ffmpeg will drop the PTS/DTS timestamp value. The default value is `3600*30` (30 hours), which is arbitrarily picked and quite conservative. \-muxdelay seconds (_output_) Set the maximum demux-decode delay. \-muxpreload seconds (_output_) Set the initial demux-decode delay. \-streamid output-stream-index:new-value (_output_) Assign a new stream-id value to an output stream. This option should be specified prior to the output filename to which it applies. For the situation where multiple output files exist, a streamid may be reassigned to a different value. For example, to set the stream 0 PID to 33 and the stream 1 PID to 36 for an output mpegts file: ffmpeg -i inurl -streamid 0:33 -streamid 1:36 out.ts \-bsf\[:stream\_specifier\] bitstream\_filters (_input/output,per-stream_) Apply bitstream filters to matching streams. The filters are applied to each packet as it is received from the demuxer (when used as an input option) or before it is sent to the muxer (when used as an output option). bitstream\_filters is a comma-separated list of bitstream filter specifications, each of the form filter\[=optname0\=optval0:optname1\=optval1:...\] Any of the ’,=:’ characters that are to be a part of an option value need to be escaped with a backslash. Use the `-bsfs` option to get the list of bitstream filters. E.g. ffmpeg -bsf:v h264\_mp4toannexb -i h264.mp4 -c:v copy -an out.h264 applies the `h264_mp4toannexb` bitstream filter (which converts MP4-encapsulated H.264 stream to Annex B) to the _input_ video stream. On the other hand, ffmpeg -i file.mov -an -vn -bsf:s mov2textsub -c:s copy -f rawvideo sub.txt applies the `mov2textsub` bitstream filter (which extracts text from MOV subtitles) to the _output_ subtitle stream. Note, however, that since both examples use `-c copy`, it matters little whether the filters are applied on input or output - that would change if transcoding was happening. \-tag\[:stream\_specifier\] codec\_tag (_input/output,per-stream_) Force a tag/fourcc for matching streams. \-timecode hh:mm:ssSEPff Specify Timecode for writing. SEP is ’:’ for non drop timecode and ’;’ (or ’.’) for drop. ffmpeg -i input.mpg -timecode 01:02:03.04 -r 30000/1001 -s ntsc output.mpg \-filter\_complex filtergraph (_global_) Define a complex filtergraph, i.e. one with arbitrary number of inputs and/or outputs. For simple graphs – those with one input and one output of the same type – see the \-filter options. filtergraph is a description of the filtergraph, as described in the “Filtergraph syntax” section of the ffmpeg-filters manual. This option may be specified multiple times - each use creates a new complex filtergraph. Inputs to a complex filtergraph may come from different source types, distinguished by the format of the corresponding link label: * To connect an input stream, use `[file_index:stream_specifier]` (i.e. the same syntax as \-map). If stream\_specifier matches multiple streams, the first one will be used. For multiview video, the stream specifier may be followed by the view specifier, see documentation for the \-map option for its syntax. * To connect a loopback decoder use \[dec:dec\_idx\], where dec\_idx is the index of the loopback decoder to be connected to given input. For multiview video, the decoder index may be followed by the view specifier, see documentation for the \-map option for its syntax. * To connect an output from another complex filtergraph, use its link label. E.g the following example: ffmpeg -i input.mkv \\ -filter\_complex '\[0:v\]scale=size=hd1080,split=outputs=2\[for\_enc\]\[orig\_scaled\]' \\ -c:v libx264 -map '\[for\_enc\]' output.mkv \\ -dec 0:0 \\ -filter\_complex '\[dec:0\]\[orig\_scaled\]hstack\[stacked\]' \\ -map '\[stacked\]' -c:v ffv1 comparison.mkv reads an input video and * (line 2) uses a complex filtergraph with one input and two outputs to scale the video to 1920x1080 and duplicate the result to both outputs; * (line 3) encodes one scaled output with `libx264` and writes the result to output.mkv; * (line 4) decodes this encoded stream with a loopback decoder; * (line 5) places the output of the loopback decoder (i.e. the `libx264`\-encoded video) side by side with the scaled original input; * (line 6) combined video is then losslessly encoded and written into comparison.mkv. Note that the two filtergraphs cannot be combined into one, because then there would be a cycle in the transcoding pipeline (filtergraph output goes to encoding, from there to decoding, then back to the same graph), and such cycles are not allowed. An unlabeled input will be connected to the first unused input stream of the matching type. Output link labels are referred to with \-map. Unlabeled outputs are added to the first output file. Note that with this option it is possible to use only lavfi sources without normal input files. For example, to overlay an image over video ffmpeg -i video.mkv -i image.png -filter\_complex '\[0:v\]\[1:v\]overlay\[out\]' -map '\[out\]' out.mkv Here `[0:v]` refers to the first video stream in the first input file, which is linked to the first (main) input of the overlay filter. Similarly the first video stream in the second input is linked to the second (overlay) input of overlay. Assuming there is only one video stream in each input file, we can omit input labels, so the above is equivalent to ffmpeg -i video.mkv -i image.png -filter\_complex 'overlay\[out\]' -map '\[out\]' out.mkv Furthermore we can omit the output label and the single output from the filter graph will be added to the output file automatically, so we can simply write ffmpeg -i video.mkv -i image.png -filter\_complex 'overlay' out.mkv As a special exception, you can use a bitmap subtitle stream as input: it will be converted into a video with the same size as the largest video in the file, or 720x576 if no video is present. Note that this is an experimental and temporary solution. It will be removed once libavfilter has proper support for subtitles. For example, to hardcode subtitles on top of a DVB-T recording stored in MPEG-TS format, delaying the subtitles by 1 second: ffmpeg -i input.ts -filter\_complex \\ '\[#0x2ef\] setpts=PTS+1/TB \[sub\] ; \[#0x2d0\] \[sub\] overlay' \\ -sn -map '#0x2dc' output.mkv (0x2d0, 0x2dc and 0x2ef are the MPEG-TS PIDs of respectively the video, audio and subtitles streams; 0:0, 0:3 and 0:7 would have worked too) To generate 5 seconds of pure red video using lavfi `color` source: ffmpeg -filter\_complex 'color=c=red' -t 5 out.mkv \-filter\_complex\_threads nb\_threads (_global_) Defines how many threads are used to process a filter\_complex graph. Similar to filter\_threads but used for `-filter_complex` graphs only. The default is the number of available CPUs. \-lavfi filtergraph (_global_) Define a complex filtergraph, i.e. one with arbitrary number of inputs and/or outputs. Equivalent to \-filter\_complex. \-accurate\_seek (_input_) This option enables or disables accurate seeking in input files with the \-ss option. It is enabled by default, so seeking is accurate when transcoding. Use \-noaccurate\_seek to disable it, which may be useful e.g. when copying some streams and transcoding the others. \-seek\_timestamp (_input_) This option enables or disables seeking by timestamp in input files with the \-ss option. It is disabled by default. If enabled, the argument to the \-ss option is considered an actual timestamp, and is not offset by the start time of the file. This matters only for files which do not start from timestamp 0, such as transport streams. \-thread\_queue\_size size (_input/output_) For input, this option sets the maximum number of queued packets when reading from the file or device. With low latency / high rate live streams, packets may be discarded if they are not read in a timely manner; setting this value can force ffmpeg to use a separate input thread and read packets as soon as they arrive. By default ffmpeg only does this if multiple inputs are specified. For output, this option specified the maximum number of packets that may be queued to each muxing thread. \-sdp\_file file (_global_) Print sdp information for an output stream to file. This allows dumping sdp information when at least one output isn’t an rtp stream. (Requires at least one of the output formats to be rtp). \-discard (_input_) Allows discarding specific streams or frames from streams. Any input stream can be fully discarded, using value `all` whereas selective discarding of frames from a stream occurs at the demuxer and is not supported by all demuxers. none Discard no frame. default Default, which discards no frames. noref Discard all non-reference frames. bidir Discard all bidirectional frames. nokey Discard all frames excepts keyframes. all Discard all frames. \-abort\_on flags (_global_) Stop and abort on various conditions. The following flags are available: empty\_output No packets were passed to the muxer, the output is empty. empty\_output\_stream No packets were passed to the muxer in some of the output streams. \-max\_error\_rate (_global_) Set fraction of decoding frame failures across all inputs which when crossed ffmpeg will return exit code 69. Crossing this threshold does not terminate processing. Range is a floating-point number between 0 to 1. Default is 2/3. \-xerror (_global_) Stop and exit on error \-max\_muxing\_queue\_size packets (_output,per-stream_) When transcoding audio and/or video streams, ffmpeg will not begin writing into the output until it has one packet for each such stream. While waiting for that to happen, packets for other streams are buffered. This option sets the size of this buffer, in packets, for the matching output stream. The default value of this option should be high enough for most uses, so only touch this option if you are sure that you need it. \-muxing\_queue\_data\_threshold bytes (_output,per-stream_) This is a minimum threshold until which the muxing queue size is not taken into account. Defaults to 50 megabytes per stream, and is based on the overall size of packets passed to the muxer. \-auto\_conversion\_filters (_global_) Enable automatically inserting format conversion filters in all filter graphs, including those defined by \-vf, \-af, \-filter\_complex and \-lavfi. If filter format negotiation requires a conversion, the initialization of the filters will fail. Conversions can still be performed by inserting the relevant conversion filter (scale, aresample) in the graph. On by default, to explicitly disable it you need to specify `-noauto_conversion_filters`. \-bits\_per\_raw\_sample\[:stream\_specifier\] value (_output,per-stream_) Declare the number of bits per raw sample in the given output stream to be value. Note that this option sets the information provided to the encoder/muxer, it does not change the stream to conform to this value. Setting values that do not match the stream properties may result in encoding failures or invalid output files. \-stats\_enc\_pre\[:stream\_specifier\] path (_output,per-stream_) \-stats\_enc\_post\[:stream\_specifier\] path (_output,per-stream_) \-stats\_mux\_pre\[:stream\_specifier\] path (_output,per-stream_) Write per-frame encoding information about the matching streams into the file given by path. \-stats\_enc\_pre writes information about raw video or audio frames right before they are sent for encoding, while \-stats\_enc\_post writes information about encoded packets as they are received from the encoder. \-stats\_mux\_pre writes information about packets just as they are about to be sent to the muxer. Every frame or packet produces one line in the specified file. The format of this line is controlled by \-stats\_enc\_pre\_fmt / \-stats\_enc\_post\_fmt / \-stats\_mux\_pre\_fmt. When stats for multiple streams are written into a single file, the lines corresponding to different streams will be interleaved. The precise order of this interleaving is not specified and not guaranteed to remain stable between different invocations of the program, even with the same options. \-stats\_enc\_pre\_fmt\[:stream\_specifier\] format\_spec (_output,per-stream_) \-stats\_enc\_post\_fmt\[:stream\_specifier\] format\_spec (_output,per-stream_) \-stats\_mux\_pre\_fmt\[:stream\_specifier\] format\_spec (_output,per-stream_) Specify the format for the lines written with \-stats\_enc\_pre / \-stats\_enc\_post / \-stats\_mux\_pre. format\_spec is a string that may contain directives of the form {fmt}. format\_spec is backslash-escaped — use \\{, \\}, and \\\\ to write a literal {, }, or \\, respectively, into the output. The directives given with fmt may be one of the following: fidx Index of the output file. sidx Index of the output stream in the file. n Frame number. Pre-encoding: number of frames sent to the encoder so far. Post-encoding: number of packets received from the encoder so far. Muxing: number of packets submitted to the muxer for this stream so far. ni Input frame number. Index of the input frame (i.e. output by a decoder) that corresponds to this output frame or packet. -1 if unavailable. tb Timebase in which this frame/packet’s timestamps are expressed, as a rational number num/den. Note that encoder and muxer may use different timebases. tbi Timebase for ptsi, as a rational number num/den. Available when ptsi is available, 0/1 otherwise. pts Presentation timestamp of the frame or packet, as an integer. Should be multiplied by the timebase to compute presentation time. ptsi Presentation timestamp of the input frame (see ni), as an integer. Should be multiplied by tbi to compute presentation time. Printed as (2^63 - 1 = 9223372036854775807) when not available. t Presentation time of the frame or packet, as a decimal number. Equal to pts multiplied by tb. ti Presentation time of the input frame (see ni), as a decimal number. Equal to ptsi multiplied by tbi. Printed as inf when not available. dts (_packet_) Decoding timestamp of the packet, as an integer. Should be multiplied by the timebase to compute presentation time. dt (_packet_) Decoding time of the frame or packet, as a decimal number. Equal to dts multiplied by tb. sn (_frame,audio_) Number of audio samples sent to the encoder so far. samp (_frame,audio_) Number of audio samples in the frame. size (_packet_) Size of the encoded packet in bytes. br (_packet_) Current bitrate in bits per second. abr (_packet_) Average bitrate for the whole stream so far, in bits per second, -1 if it cannot be determined at this point. key (_packet_) Character ’K’ if the packet contains a keyframe, character ’N’ otherwise. Directives tagged with _packet_ may only be used with \-stats\_enc\_post\_fmt and \-stats\_mux\_pre\_fmt. Directives tagged with _frame_ may only be used with \-stats\_enc\_pre\_fmt. Directives tagged with _audio_ may only be used with audio streams. The default format strings are: pre-encoding {fidx} {sidx} {n} {t} post-encoding {fidx} {sidx} {n} {t} In the future, new items may be added to the end of the default formatting strings. Users who depend on the format staying exactly the same, should prescribe it manually. Note that stats for different streams written into the same file may have different formats. ### 5.12 Preset files A preset file contains a sequence of option\=value pairs, one for each line, specifying a sequence of options which would be awkward to specify on the command line. Lines starting with the hash (’#’) character are ignored and are used to provide comments. Check the presets directory in the FFmpeg source tree for examples. There are two types of preset files: ffpreset and avpreset files. #### 5.12.1 ffpreset files ffpreset files are specified with the `vpre`, `apre`, `spre`, and `fpre` options. The `fpre` option takes the filename of the preset instead of a preset name as input and can be used for any kind of codec. For the `vpre`, `apre`, and `spre` options, the options specified in a preset file are applied to the currently selected codec of the same type as the preset option. The argument passed to the `vpre`, `apre`, and `spre` preset options identifies the preset file to use according to the following rules: First ffmpeg searches for a file named arg.ffpreset in the directories $FFMPEG\_DATADIR (if set), and $HOME/.ffmpeg, and in the datadir defined at configuration time (usually PREFIX/share/ffmpeg) or in a ffpresets folder along the executable on win32, in that order. For example, if the argument is `libvpx-1080p`, it will search for the file libvpx-1080p.ffpreset. If no such file is found, then ffmpeg will search for a file named codec\_name\-arg.ffpreset in the above-mentioned directories, where codec\_name is the name of the codec to which the preset file options will be applied. For example, if you select the video codec with `-vcodec libvpx` and use `-vpre 1080p`, then it will search for the file libvpx-1080p.ffpreset. #### 5.12.2 avpreset files avpreset files are specified with the `pre` option. They work similar to ffpreset files, but they only allow encoder- specific options. Therefore, an option\=value pair specifying an encoder cannot be used. When the `pre` option is specified, ffmpeg will look for files with the suffix .avpreset in the directories $AVCONV\_DATADIR (if set), and $HOME/.avconv, and in the datadir defined at configuration time (usually PREFIX/share/ffmpeg), in that order. First ffmpeg searches for a file named codec\_name\-arg.avpreset in the above-mentioned directories, where codec\_name is the name of the codec to which the preset file options will be applied. For example, if you select the video codec with `-vcodec libvpx` and use `-pre 1080p`, then it will search for the file libvpx-1080p.avpreset. If no such file is found, then ffmpeg will search for a file named arg.avpreset in the same directories. ### 5.13 vstats file format The `-vstats` and `-vstats_file` options enable generation of a file containing statistics about the generated video outputs. The `-vstats_version` option controls the format version of the generated file. With version `1` the format is: frame= FRAME q= FRAME\_QUALITY PSNR= PSNR f\_size= FRAME\_SIZE s\_size= STREAM\_SIZEkB time= TIMESTAMP br= BITRATEkbits/s avg\_br= AVERAGE\_BITRATEkbits/s With version `2` the format is: out= OUT\_FILE\_INDEX st= OUT\_FILE\_STREAM\_INDEX frame= FRAME\_NUMBER q= FRAME\_QUALITYf PSNR= PSNR f\_size= FRAME\_SIZE s\_size= STREAM\_SIZEkB time= TIMESTAMP br= BITRATEkbits/s avg\_br= AVERAGE\_BITRATEkbits/s The value corresponding to each key is described below: avg\_br average bitrate expressed in Kbits/s br bitrate expressed in Kbits/s frame number of encoded frame out out file index PSNR Peak Signal to Noise Ratio q quality of the frame f\_size encoded packet size expressed as number of bytes s\_size stream size expressed in KiB st out file stream index time time of the packet type picture type See also the \-stats\_enc options for an alternative way to show encoding statistics. ## 6 Examples ### 6.1 Video and Audio grabbing If you specify the input format and device then ffmpeg can grab video and audio directly. ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg Or with an ALSA audio source (mono input, card id 1) instead of OSS: ffmpeg -f alsa -ac 1 -i hw:1 -f video4linux2 -i /dev/video0 /tmp/out.mpg Note that you must activate the right video source and channel before launching ffmpeg with any TV viewer such as xawtv by Gerd Knorr. You also have to set the audio recording levels correctly with a standard mixer. ### 6.2 X11 grabbing Grab the X11 display with ffmpeg via ffmpeg -f x11grab -video\_size cif -framerate 25 -i :0.0 /tmp/out.mpg 0.0 is display.screen number of your X11 server, same as the DISPLAY environment variable. ffmpeg -f x11grab -video\_size cif -framerate 25 -i :0.0+10,20 /tmp/out.mpg 0.0 is display.screen number of your X11 server, same as the DISPLAY environment variable. 10 is the x-offset and 20 the y-offset for the grabbing. ### 6.3 Video and Audio file format conversion Any supported file format and protocol can serve as input to ffmpeg: Examples: * You can use YUV files as input: ffmpeg -i /tmp/test%d.Y /tmp/out.mpg It will use the files: /tmp/test0.Y, /tmp/test0.U, /tmp/test0.V, /tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc... The Y files use twice the resolution of the U and V files. They are raw files, without header. They can be generated by all decent video decoders. You must specify the size of the image with the \-s option if ffmpeg cannot guess it. * You can input from a raw YUV420P file: ffmpeg -i /tmp/test.yuv /tmp/out.avi test.yuv is a file containing raw YUV planar data. Each frame is composed of the Y plane followed by the U and V planes at half vertical and horizontal resolution. * You can output to a raw YUV420P file: ffmpeg -i mydivx.avi hugefile.yuv * You can set several input files and output files: ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg Converts the audio file a.wav and the raw YUV video file a.yuv to MPEG file a.mpg. * You can also do audio and video conversions at the same time: ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2 Converts a.wav to MPEG audio at 22050 Hz sample rate. * You can encode to several formats at the same time and define a mapping from input stream to output streams: ffmpeg -i /tmp/a.wav -map 0:a -b:a 64k /tmp/a.mp2 -map 0:a -b:a 128k /tmp/b.mp2 Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. ’-map file:index’ specifies which input stream is used for each output stream, in the order of the definition of output streams. * You can transcode decrypted VOBs: ffmpeg -i snatch\_1.vob -f avi -c:v mpeg4 -b:v 800k -g 300 -bf 2 -c:a libmp3lame -b:a 128k snatch.avi This is a typical DVD ripping example; the input is a VOB file, the output an AVI file with MPEG-4 video and MP3 audio. Note that in this command we use B-frames so the MPEG-4 stream is DivX5 compatible, and GOP size is 300 which means one intra frame every 10 seconds for 29.97fps input video. Furthermore, the audio stream is MP3-encoded so you need to enable LAME support by passing `--enable-libmp3lame` to configure. The mapping is particularly useful for DVD transcoding to get the desired audio language. NOTE: To see the supported input formats, use `ffmpeg -demuxers`. * You can extract images from a video, or create a video from many images: For extracting images from a video: ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg This will extract one video frame per second from the video and will output them in files named foo-001.jpeg, foo-002.jpeg, etc. Images will be rescaled to fit the new WxH values. If you want to extract just a limited number of frames, you can use the above command in combination with the `-frames:v` or `-t` option, or in combination with -ss to start extracting from a certain point in time. For creating a video from many images: ffmpeg -f image2 -framerate 12 -i foo-%03d.jpeg -s WxH foo.avi The syntax `foo-%03d.jpeg` specifies to use a decimal number composed of three digits padded with zeroes to express the sequence number. It is the same syntax supported by the C printf function, but only formats accepting a normal integer are suitable. When importing an image sequence, -i also supports expanding shell-like wildcard patterns (globbing) internally, by selecting the image2-specific `-pattern_type glob` option. For example, for creating a video from filenames matching the glob pattern `foo-*.jpeg`: ffmpeg -f image2 -pattern\_type glob -framerate 12 -i 'foo-\*.jpeg' -s WxH foo.avi * You can put many streams of the same type in the output: ffmpeg -i test1.avi -i test2.avi -map 1:1 -map 1:0 -map 0:1 -map 0:0 -c copy -y test12.nut The resulting output file test12.nut will contain the first four streams from the input files in reverse order. * To force CBR video output: ffmpeg -i myfile.avi -b 4000k -minrate 4000k -maxrate 4000k -bufsize 1835k out.m2v * The four options lmin, lmax, mblmin and mblmax use ’lambda’ units, but you may use the QP2LAMBDA constant to easily convert from ’q’ units: ffmpeg -i src.ext -lmax 21\*QP2LAMBDA dst.ext ## 7 Syntax This section documents the syntax and formats employed by the FFmpeg libraries and tools. ### 7.1 Quoting and escaping FFmpeg adopts the following quoting and escaping mechanism, unless explicitly specified. The following rules are applied: * ‘'’ and ‘\\’ are special characters (respectively used for quoting and escaping). In addition to them, there might be other special characters depending on the specific syntax where the escaping and quoting are employed. * A special character is escaped by prefixing it with a ‘\\’. * All characters enclosed between ‘''’ are included literally in the parsed string. The quote character ‘'’ itself cannot be quoted, so you may need to close the quote and escape it. * Leading and trailing whitespaces, unless escaped or quoted, are removed from the parsed string. Note that you may need to add a second level of escaping when using the command line or a script, which depends on the syntax of the adopted shell language. The function `av_get_token` defined in libavutil/avstring.h can be used to parse a token quoted or escaped according to the rules defined above. The tool tools/ffescape in the FFmpeg source tree can be used to automatically quote or escape a string in a script. #### 7.1.1 Examples * Escape the string `Crime d'Amour` containing the `'` special character: Crime d\\'Amour * The string above contains a quote, so the `'` needs to be escaped when quoting it: 'Crime d'\\''Amour' * Include leading or trailing whitespaces using quoting: ' this string starts and ends with whitespaces ' * Escaping and quoting can be mixed together: ' The string '\\'string\\'' is a string ' * To include a literal ‘\\’ you can use either escaping or quoting: 'c:\\foo' can be written as c:\\\\foo ### 7.2 Date The accepted syntax is: \[(YYYY-MM-DD|YYYYMMDD)\[T|t| \]\]((HH:MM:SS\[.m...\]\]\])|(HHMMSS\[.m...\]\]\]))\[Z\] now If the value is "now" it takes the current time. Time is local time unless Z is appended, in which case it is interpreted as UTC. If the year-month-day part is not specified it takes the current year-month-day. ### 7.3 Time duration There are two accepted syntaxes for expressing time duration. \[-\]\[HH:\]MM:SS\[.m...\] HH expresses the number of hours, MM the number of minutes for a maximum of 2 digits, and SS the number of seconds for a maximum of 2 digits. The m at the end expresses decimal value for SS. _or_ \[-\]S+\[.m...\]\[s|ms|us\] S expresses the number of seconds, with the optional decimal part m. The optional literal suffixes ‘s’, ‘ms’ or ‘us’ indicate to interpret the value as seconds, milliseconds or microseconds, respectively. In both expressions, the optional ‘\-’ indicates negative duration. #### 7.3.1 Examples The following examples are all valid time duration: ‘55’ 55 seconds ‘0.2’ 0.2 seconds ‘200ms’ 200 milliseconds, that’s 0.2s ‘200000us’ 200000 microseconds, that’s 0.2s ‘12:03:45’ 12 hours, 03 minutes and 45 seconds ‘23.189’ 23.189 seconds ### 7.4 Video size Specify the size of the sourced video, it may be a string of the form widthxheight, or the name of a size abbreviation. The following abbreviations are recognized: ‘ntsc’ 720x480 ‘pal’ 720x576 ‘qntsc’ 352x240 ‘qpal’ 352x288 ‘sntsc’ 640x480 ‘spal’ 768x576 ‘film’ 352x240 ‘ntsc-film’ 352x240 ‘sqcif’ 128x96 ‘qcif’ 176x144 ‘cif’ 352x288 ‘4cif’ 704x576 ‘16cif’ 1408x1152 ‘qqvga’ 160x120 ‘qvga’ 320x240 ‘vga’ 640x480 ‘svga’ 800x600 ‘xga’ 1024x768 ‘uxga’ 1600x1200 ‘qxga’ 2048x1536 ‘sxga’ 1280x1024 ‘qsxga’ 2560x2048 ‘hsxga’ 5120x4096 ‘wvga’ 852x480 ‘wxga’ 1366x768 ‘wsxga’ 1600x1024 ‘wuxga’ 1920x1200 ‘woxga’ 2560x1600 ‘wqsxga’ 3200x2048 ‘wquxga’ 3840x2400 ‘whsxga’ 6400x4096 ‘whuxga’ 7680x4800 ‘cga’ 320x200 ‘ega’ 640x350 ‘hd480’ 852x480 ‘hd720’ 1280x720 ‘hd1080’ 1920x1080 ‘2k’ 2048x1080 ‘2kflat’ 1998x1080 ‘2kscope’ 2048x858 ‘4k’ 4096x2160 ‘4kflat’ 3996x2160 ‘4kscope’ 4096x1716 ‘nhd’ 640x360 ‘hqvga’ 240x160 ‘wqvga’ 400x240 ‘fwqvga’ 432x240 ‘hvga’ 480x320 ‘qhd’ 960x540 ‘2kdci’ 2048x1080 ‘4kdci’ 4096x2160 ‘uhd2160’ 3840x2160 ‘uhd4320’ 7680x4320 ### 7.5 Video rate Specify the frame rate of a video, expressed as the number of frames generated per second. It has to be a string in the format frame\_rate\_num/frame\_rate\_den, an integer number, a float number or a valid video frame rate abbreviation. The following abbreviations are recognized: ‘ntsc’ 30000/1001 ‘pal’ 25/1 ‘qntsc’ 30000/1001 ‘qpal’ 25/1 ‘sntsc’ 30000/1001 ‘spal’ 25/1 ‘film’ 24/1 ‘ntsc-film’ 24000/1001 ### 7.6 Ratio A ratio can be expressed as an expression, or in the form numerator:denominator. Note that a ratio with infinite (1/0) or negative value is considered valid, so you should check on the returned value if you want to exclude those values. The undefined value can be expressed using the "0:0" string. ### 7.7 Color It can be the name of a color as defined below (case insensitive match) or a `[0x|#]RRGGBB[AA]` sequence, possibly followed by @ and a string representing the alpha component. The alpha component may be a string composed by "0x" followed by an hexadecimal number or a decimal number between 0.0 and 1.0, which represents the opacity value (‘0x00’ or ‘0.0’ means completely transparent, ‘0xff’ or ‘1.0’ completely opaque). If the alpha component is not specified then ‘0xff’ is assumed. The string ‘random’ will result in a random color. The following names of colors are recognized: ‘AliceBlue’ 0xF0F8FF ‘AntiqueWhite’ 0xFAEBD7 ‘Aqua’ 0x00FFFF ‘Aquamarine’ 0x7FFFD4 ‘Azure’ 0xF0FFFF ‘Beige’ 0xF5F5DC ‘Bisque’ 0xFFE4C4 ‘Black’ 0x000000 ‘BlanchedAlmond’ 0xFFEBCD ‘Blue’ 0x0000FF ‘BlueViolet’ 0x8A2BE2 ‘Brown’ 0xA52A2A ‘BurlyWood’ 0xDEB887 ‘CadetBlue’ 0x5F9EA0 ‘Chartreuse’ 0x7FFF00 ‘Chocolate’ 0xD2691E ‘Coral’ 0xFF7F50 ‘CornflowerBlue’ 0x6495ED ‘Cornsilk’ 0xFFF8DC ‘Crimson’ 0xDC143C ‘Cyan’ 0x00FFFF ‘DarkBlue’ 0x00008B ‘DarkCyan’ 0x008B8B ‘DarkGoldenRod’ 0xB8860B ‘DarkGray’ 0xA9A9A9 ‘DarkGreen’ 0x006400 ‘DarkKhaki’ 0xBDB76B ‘DarkMagenta’ 0x8B008B ‘DarkOliveGreen’ 0x556B2F ‘Darkorange’ 0xFF8C00 ‘DarkOrchid’ 0x9932CC ‘DarkRed’ 0x8B0000 ‘DarkSalmon’ 0xE9967A ‘DarkSeaGreen’ 0x8FBC8F ‘DarkSlateBlue’ 0x483D8B ‘DarkSlateGray’ 0x2F4F4F ‘DarkTurquoise’ 0x00CED1 ‘DarkViolet’ 0x9400D3 ‘DeepPink’ 0xFF1493 ‘DeepSkyBlue’ 0x00BFFF ‘DimGray’ 0x696969 ‘DodgerBlue’ 0x1E90FF ‘FireBrick’ 0xB22222 ‘FloralWhite’ 0xFFFAF0 ‘ForestGreen’ 0x228B22 ‘Fuchsia’ 0xFF00FF ‘Gainsboro’ 0xDCDCDC ‘GhostWhite’ 0xF8F8FF ‘Gold’ 0xFFD700 ‘GoldenRod’ 0xDAA520 ‘Gray’ 0x808080 ‘Green’ 0x008000 ‘GreenYellow’ 0xADFF2F ‘HoneyDew’ 0xF0FFF0 ‘HotPink’ 0xFF69B4 ‘IndianRed’ 0xCD5C5C ‘Indigo’ 0x4B0082 ‘Ivory’ 0xFFFFF0 ‘Khaki’ 0xF0E68C ‘Lavender’ 0xE6E6FA ‘LavenderBlush’ 0xFFF0F5 ‘LawnGreen’ 0x7CFC00 ‘LemonChiffon’ 0xFFFACD ‘LightBlue’ 0xADD8E6 ‘LightCoral’ 0xF08080 ‘LightCyan’ 0xE0FFFF ‘LightGoldenRodYellow’ 0xFAFAD2 ‘LightGreen’ 0x90EE90 ‘LightGrey’ 0xD3D3D3 ‘LightPink’ 0xFFB6C1 ‘LightSalmon’ 0xFFA07A ‘LightSeaGreen’ 0x20B2AA ‘LightSkyBlue’ 0x87CEFA ‘LightSlateGray’ 0x778899 ‘LightSteelBlue’ 0xB0C4DE ‘LightYellow’ 0xFFFFE0 ‘Lime’ 0x00FF00 ‘LimeGreen’ 0x32CD32 ‘Linen’ 0xFAF0E6 ‘Magenta’ 0xFF00FF ‘Maroon’ 0x800000 ‘MediumAquaMarine’ 0x66CDAA ‘MediumBlue’ 0x0000CD ‘MediumOrchid’ 0xBA55D3 ‘MediumPurple’ 0x9370D8 ‘MediumSeaGreen’ 0x3CB371 ‘MediumSlateBlue’ 0x7B68EE ‘MediumSpringGreen’ 0x00FA9A ‘MediumTurquoise’ 0x48D1CC ‘MediumVioletRed’ 0xC71585 ‘MidnightBlue’ 0x191970 ‘MintCream’ 0xF5FFFA ‘MistyRose’ 0xFFE4E1 ‘Moccasin’ 0xFFE4B5 ‘NavajoWhite’ 0xFFDEAD ‘Navy’ 0x000080 ‘OldLace’ 0xFDF5E6 ‘Olive’ 0x808000 ‘OliveDrab’ 0x6B8E23 ‘Orange’ 0xFFA500 ‘OrangeRed’ 0xFF4500 ‘Orchid’ 0xDA70D6 ‘PaleGoldenRod’ 0xEEE8AA ‘PaleGreen’ 0x98FB98 ‘PaleTurquoise’ 0xAFEEEE ‘PaleVioletRed’ 0xD87093 ‘PapayaWhip’ 0xFFEFD5 ‘PeachPuff’ 0xFFDAB9 ‘Peru’ 0xCD853F ‘Pink’ 0xFFC0CB ‘Plum’ 0xDDA0DD ‘PowderBlue’ 0xB0E0E6 ‘Purple’ 0x800080 ‘Red’ 0xFF0000 ‘RosyBrown’ 0xBC8F8F ‘RoyalBlue’ 0x4169E1 ‘SaddleBrown’ 0x8B4513 ‘Salmon’ 0xFA8072 ‘SandyBrown’ 0xF4A460 ‘SeaGreen’ 0x2E8B57 ‘SeaShell’ 0xFFF5EE ‘Sienna’ 0xA0522D ‘Silver’ 0xC0C0C0 ‘SkyBlue’ 0x87CEEB ‘SlateBlue’ 0x6A5ACD ‘SlateGray’ 0x708090 ‘Snow’ 0xFFFAFA ‘SpringGreen’ 0x00FF7F ‘SteelBlue’ 0x4682B4 ‘Tan’ 0xD2B48C ‘Teal’ 0x008080 ‘Thistle’ 0xD8BFD8 ‘Tomato’ 0xFF6347 ‘Turquoise’ 0x40E0D0 ‘Violet’ 0xEE82EE ‘Wheat’ 0xF5DEB3 ‘White’ 0xFFFFFF ‘WhiteSmoke’ 0xF5F5F5 ‘Yellow’ 0xFFFF00 ‘YellowGreen’ 0x9ACD32 ### 7.8 Channel Layout A channel layout specifies the spatial disposition of the channels in a multi-channel audio stream. To specify a channel layout, FFmpeg makes use of a special syntax. Individual channels are identified by an id, as given by the table below: ‘FL’ front left ‘FR’ front right ‘FC’ front center ‘LFE’ low frequency ‘BL’ back left ‘BR’ back right ‘FLC’ front left-of-center ‘FRC’ front right-of-center ‘BC’ back center ‘SL’ side left ‘SR’ side right ‘TC’ top center ‘TFL’ top front left ‘TFC’ top front center ‘TFR’ top front right ‘TBL’ top back left ‘TBC’ top back center ‘TBR’ top back right ‘DL’ downmix left ‘DR’ downmix right ‘WL’ wide left ‘WR’ wide right ‘SDL’ surround direct left ‘SDR’ surround direct right ‘LFE2’ low frequency 2 Standard channel layout compositions can be specified by using the following identifiers: ‘mono’ FC ‘stereo’ FL+FR ‘2.1’ FL+FR+LFE ‘3.0’ FL+FR+FC ‘3.0(back)’ FL+FR+BC ‘4.0’ FL+FR+FC+BC ‘quad’ FL+FR+BL+BR ‘quad(side)’ FL+FR+SL+SR ‘3.1’ FL+FR+FC+LFE ‘5.0’ FL+FR+FC+BL+BR ‘5.0(side)’ FL+FR+FC+SL+SR ‘4.1’ FL+FR+FC+LFE+BC ‘5.1’ FL+FR+FC+LFE+BL+BR ‘5.1(side)’ FL+FR+FC+LFE+SL+SR ‘6.0’ FL+FR+FC+BC+SL+SR ‘6.0(front)’ FL+FR+FLC+FRC+SL+SR ‘3.1.2’ FL+FR+FC+LFE+TFL+TFR ‘hexagonal’ FL+FR+FC+BL+BR+BC ‘6.1’ FL+FR+FC+LFE+BC+SL+SR ‘6.1’ FL+FR+FC+LFE+BL+BR+BC ‘6.1(front)’ FL+FR+LFE+FLC+FRC+SL+SR ‘7.0’ FL+FR+FC+BL+BR+SL+SR ‘7.0(front)’ FL+FR+FC+FLC+FRC+SL+SR ‘7.1’ FL+FR+FC+LFE+BL+BR+SL+SR ‘7.1(wide)’ FL+FR+FC+LFE+BL+BR+FLC+FRC ‘7.1(wide-side)’ FL+FR+FC+LFE+FLC+FRC+SL+SR ‘5.1.2’ FL+FR+FC+LFE+BL+BR+TFL+TFR ‘octagonal’ FL+FR+FC+BL+BR+BC+SL+SR ‘cube’ FL+FR+BL+BR+TFL+TFR+TBL+TBR ‘5.1.4’ FL+FR+FC+LFE+BL+BR+TFL+TFR+TBL+TBR ‘7.1.2’ FL+FR+FC+LFE+BL+BR+SL+SR+TFL+TFR ‘7.1.4’ FL+FR+FC+LFE+BL+BR+SL+SR+TFL+TFR+TBL+TBR ‘7.2.3’ FL+FR+FC+LFE+BL+BR+SL+SR+TFL+TFR+TBC+LFE2 ‘9.1.4’ FL+FR+FC+LFE+BL+BR+FLC+FRC+SL+SR+TFL+TFR+TBL+TBR ‘9.1.6’ FL+FR+FC+LFE+BL+BR+FLC+FRC+SL+SR+TFL+TFR+TBL+TBR+TSL+TSR ‘hexadecagonal’ FL+FR+FC+BL+BR+BC+SL+SR+WL+WR+TBL+TBR+TBC+TFC+TFL+TFR ‘binaural’ BIL+BIR ‘downmix’ DL+DR ‘22.2’ FL+FR+FC+LFE+BL+BR+FLC+FRC+BC+SL+SR+TC+TFL+TFC+TFR+TBL+TBC+TBR+LFE2+TSL+TSR+BFC+BFL+BFR A custom channel layout can be specified as a sequence of terms, separated by ’+’. Each term can be: * the name of a single channel (e.g. ‘FL’, ‘FR’, ‘FC’, ‘LFE’, etc.), each optionally containing a custom name after a ’@’, (e.g. ‘FL@Left’, ‘FR@Right’, ‘FC@Center’, ‘LFE@Low\_Frequency’, etc.) A standard channel layout can be specified by the following: * the name of a single channel (e.g. ‘FL’, ‘FR’, ‘FC’, ‘LFE’, etc.) * the name of a standard channel layout (e.g. ‘mono’, ‘stereo’, ‘4.0’, ‘quad’, ‘5.0’, etc.) * a number of channels, in decimal, followed by ’c’, yielding the default channel layout for that number of channels (see the function `av_channel_layout_default`). Note that not all channel counts have a default layout. * a number of channels, in decimal, followed by ’C’, yielding an unknown channel layout with the specified number of channels. Note that not all channel layout specification strings support unknown channel layouts. * a channel layout mask, in hexadecimal starting with "0x" (see the `AV_CH_*` macros in libavutil/channel\_layout.h. Before libavutil version 53 the trailing character "c" to specify a number of channels was optional, but now it is required, while a channel layout mask can also be specified as a decimal number (if and only if not followed by "c" or "C"). See also the function `av_channel_layout_from_string` defined in libavutil/channel\_layout.h. ## 8 Expression Evaluation When evaluating an arithmetic expression, FFmpeg uses an internal formula evaluator, implemented through the libavutil/eval.h interface. An expression may contain unary, binary operators, constants, and functions. Two expressions expr1 and expr2 can be combined to form another expression "expr1;expr2". expr1 and expr2 are evaluated in turn, and the new expression evaluates to the value of expr2. The following binary operators are available: `+`, `-`, `*`, `/`, `^`. The following unary operators are available: `+`, `-`. Some internal variables can be used to store and load intermediary results. They can be accessed using the `ld` and `st` functions with an index argument varying from 0 to 9 to specify which internal variable to access. The following functions are available: abs(x) Compute absolute value of x. acos(x) Compute arccosine of x. asin(x) Compute arcsine of x. atan(x) Compute arctangent of x. atan2(y, x) Compute principal value of the arc tangent of y/x. between(x, min, max) Return 1 if x is greater than or equal to min and lesser than or equal to max, 0 otherwise. bitand(x, y) bitor(x, y) Compute bitwise and/or operation on x and y. The results of the evaluation of x and y are converted to integers before executing the bitwise operation. Note that both the conversion to integer and the conversion back to floating point can lose precision. Beware of unexpected results for large numbers (usually 2^53 and larger). ceil(expr) Round the value of expression expr upwards to the nearest integer. For example, "ceil(1.5)" is "2.0". clip(x, min, max) Return the value of x clipped between min and max. cos(x) Compute cosine of x. cosh(x) Compute hyperbolic cosine of x. eq(x, y) Return 1 if x and y are equivalent, 0 otherwise. exp(x) Compute exponential of x (with base `e`, the Euler’s number). floor(expr) Round the value of expression expr downwards to the nearest integer. For example, "floor(-1.5)" is "-2.0". gauss(x) Compute Gauss function of x, corresponding to `exp(-x*x/2) / sqrt(2*PI)`. gcd(x, y) Return the greatest common divisor of x and y. If both x and y are 0 or either or both are less than zero then behavior is undefined. gt(x, y) Return 1 if x is greater than y, 0 otherwise. gte(x, y) Return 1 if x is greater than or equal to y, 0 otherwise. hypot(x, y) This function is similar to the C function with the same name; it returns "sqrt(x\*x + y\*y)", the length of the hypotenuse of a right triangle with sides of length x and y, or the distance of the point (x, y) from the origin. if(x, y) Evaluate x, and if the result is non-zero return the result of the evaluation of y, return 0 otherwise. if(x, y, z) Evaluate x, and if the result is non-zero return the evaluation result of y, otherwise the evaluation result of z. ifnot(x, y) Evaluate x, and if the result is zero return the result of the evaluation of y, return 0 otherwise. ifnot(x, y, z) Evaluate x, and if the result is zero return the evaluation result of y, otherwise the evaluation result of z. isinf(x) Return 1.0 if x is +/-INFINITY, 0.0 otherwise. isnan(x) Return 1.0 if x is NAN, 0.0 otherwise. ld(idx) Load the value of the internal variable with index idx, which was previously stored with st(idx, expr). The function returns the loaded value. lerp(x, y, z) Return linear interpolation between x and y by amount of z. log(x) Compute natural logarithm of x. lt(x, y) Return 1 if x is lesser than y, 0 otherwise. lte(x, y) Return 1 if x is lesser than or equal to y, 0 otherwise. max(x, y) Return the maximum between x and y. min(x, y) Return the minimum between x and y. mod(x, y) Compute the remainder of division of x by y. not(expr) Return 1.0 if expr is zero, 0.0 otherwise. pow(x, y) Compute the power of x elevated y, it is equivalent to "(x)^(y)". print(t) print(t, l) Print the value of expression t with loglevel l. If l is not specified then a default log level is used. Return the value of the expression printed. random(idx) Return a pseudo random value between 0.0 and 1.0. idx is the index of the internal variable used to save the seed/state, which can be previously stored with `st(idx)`. To initialize the seed, you need to store the seed value as a 64-bit unsigned integer in the internal variable with index idx. For example, to store the seed with value `42` in the internal variable with index `0` and print a few random values: st(0,42); print(random(0)); print(random(0)); print(random(0)) randomi(idx, min, max) Return a pseudo random value in the interval between min and max. idx is the index of the internal variable which will be used to save the seed/state, which can be previously stored with `st(idx)`. To initialize the seed, you need to store the seed value as a 64-bit unsigned integer in the internal variable with index idx. root(expr, max) Find an input value for which the function represented by expr with argument ld(0) is 0 in the interval 0..max. The expression in expr must denote a continuous function or the result is undefined. ld(0) is used to represent the function input value, which means that the given expression will be evaluated multiple times with various input values that the expression can access through `ld(0)`. When the expression evaluates to 0 then the corresponding input value will be returned. round(expr) Round the value of expression expr to the nearest integer. For example, "round(1.5)" is "2.0". sgn(x) Compute sign of x. sin(x) Compute sine of x. sinh(x) Compute hyperbolic sine of x. sqrt(expr) Compute the square root of expr. This is equivalent to "(expr)^.5". squish(x) Compute expression `1/(1 + exp(4*x))`. st(idx, expr) Store the value of the expression expr in an internal variable. idx specifies the index of the variable where to store the value, and it is a value ranging from 0 to 9. The function returns the value stored in the internal variable. The stored value can be retrieved with `ld(var)`. Note: variables are currently not shared between expressions. tan(x) Compute tangent of x. tanh(x) Compute hyperbolic tangent of x. taylor(expr, x) taylor(expr, x, idx) Evaluate a Taylor series at x, given an expression representing the `ld(idx)`\-th derivative of a function at 0. When the series does not converge the result is undefined. ld(idx) is used to represent the derivative order in expr, which means that the given expression will be evaluated multiple times with various input values that the expression can access through `ld(idx)`. If idx is not specified then 0 is assumed. Note, when you have the derivatives at y instead of 0, `taylor(expr, x-y)` can be used. time(0) Return the current (wallclock) time in seconds. trunc(expr) Round the value of expression expr towards zero to the nearest integer. For example, "trunc(-1.5)" is "-1.0". while(cond, expr) Evaluate expression expr while the expression cond is non-zero, and returns the value of the last expr evaluation, or NAN if cond was always false. The following constants are available: PI area of the unit disc, approximately 3.14 E exp(1) (Euler’s number), approximately 2.718 PHI golden ratio (1+sqrt(5))/2, approximately 1.618 Assuming that an expression is considered "true" if it has a non-zero value, note that: `*` works like AND `+` works like OR For example the construct: if (A AND B) then C is equivalent to: if(A\*B, C) In your C code, you can extend the list of unary and binary functions, and define recognized constants, so that they are available for your expressions. The evaluator also recognizes the International System unit prefixes. If ’i’ is appended after the prefix, binary prefixes are used, which are based on powers of 1024 instead of powers of 1000. The ’B’ postfix multiplies the value by 8, and can be appended after a unit prefix or used alone. This allows using for example ’KB’, ’MiB’, ’G’ and ’B’ as number postfix. The list of available International System prefixes follows, with indication of the corresponding powers of 10 and of 2. y 10^-24 / 2^-80 z 10^-21 / 2^-70 a 10^-18 / 2^-60 f 10^-15 / 2^-50 p 10^-12 / 2^-40 n 10^-9 / 2^-30 u 10^-6 / 2^-20 m 10^-3 / 2^-10 c 10^-2 d 10^-1 h 10^2 k 10^3 / 2^10 K 10^3 / 2^10 M 10^6 / 2^20 G 10^9 / 2^30 T 10^12 / 2^40 P 10^15 / 2^50 E 10^18 / 2^60 Z 10^21 / 2^70 Y 10^24 / 2^80 ## 9 Codec Options libavcodec provides some generic global options, which can be set on all the encoders and decoders. In addition, each codec may support so-called private options, which are specific for a given codec. Sometimes, a global option may only affect a specific kind of codec, and may be nonsensical or ignored by another, so you need to be aware of the meaning of the specified options. Also some options are meant only for decoding or encoding. Options may be set by specifying -option value in the FFmpeg tools, or by setting the value explicitly in the `AVCodecContext` options or using the libavutil/opt.h API for programmatic use. The list of supported options follow: b integer (_encoding,audio,video_) Set bitrate in bits/s. Default value is 200K. ab integer (_encoding,audio_) Set audio bitrate (in bits/s). Default value is 128K. bt integer (_encoding,video_) Set video bitrate tolerance (in bits/s). In 1-pass mode, bitrate tolerance specifies how far ratecontrol is willing to deviate from the target average bitrate value. This is not related to min/max bitrate. Lowering tolerance too much has an adverse effect on quality. flags flags (_decoding/encoding,audio,video,subtitles_) Set generic flags. Possible values: ‘mv4’ Use four motion vector by macroblock (mpeg4). ‘qpel’ Use 1/4 pel motion compensation. ‘loop’ Use loop filter. ‘qscale’ Use fixed qscale. ‘pass1’ Use internal 2pass ratecontrol in first pass mode. ‘pass2’ Use internal 2pass ratecontrol in second pass mode. ‘gray’ Only decode/encode grayscale. ‘psnr’ Set error\[?\] variables during encoding. ‘truncated’ Input bitstream might be randomly truncated. ‘drop\_changed’ Don’t output frames whose parameters differ from first decoded frame in stream. Error AVERROR\_INPUT\_CHANGED is returned when a frame is dropped. ‘ildct’ Use interlaced DCT. ‘low\_delay’ Force low delay. ‘global\_header’ Place global headers in extradata instead of every keyframe. ‘bitexact’ Only write platform-, build- and time-independent data. (except (I)DCT). This ensures that file and data checksums are reproducible and match between platforms. Its primary use is for regression testing. ‘aic’ Apply H263 advanced intra coding / mpeg4 ac prediction. ‘ilme’ Apply interlaced motion estimation. ‘cgop’ Use closed gop. ‘output\_corrupt’ Output even potentially corrupted frames. time\_base rational number Set codec time base. It is the fundamental unit of time (in seconds) in terms of which frame timestamps are represented. For fixed-fps content, timebase should be `1 / frame_rate` and timestamp increments should be identically 1. g integer (_encoding,video_) Set the group of picture (GOP) size. Default value is 12. ar integer (_decoding/encoding,audio_) Set audio sampling rate (in Hz). ac integer (_decoding/encoding,audio_) Set number of audio channels. cutoff integer (_encoding,audio_) Set cutoff bandwidth. (Supported only by selected encoders, see their respective documentation sections.) frame\_size integer (_encoding,audio_) Set audio frame size. Each submitted frame except the last must contain exactly frame\_size samples per channel. May be 0 when the codec has CODEC\_CAP\_VARIABLE\_FRAME\_SIZE set, in that case the frame size is not restricted. It is set by some decoders to indicate constant frame size. frame\_number integer Set the frame number. delay integer qcomp float (_encoding,video_) Set video quantizer scale compression (VBR). It is used as a constant in the ratecontrol equation. Recommended range for default rc\_eq: 0.0-1.0. qblur float (_encoding,video_) Set video quantizer scale blur (VBR). qmin integer (_encoding,video_) Set min video quantizer scale (VBR). Must be included between -1 and 69, default value is 2. qmax integer (_encoding,video_) Set max video quantizer scale (VBR). Must be included between -1 and 1024, default value is 31. qdiff integer (_encoding,video_) Set max difference between the quantizer scale (VBR). bf integer (_encoding,video_) Set max number of B frames between non-B-frames. Must be an integer between -1 and 16. 0 means that B-frames are disabled. If a value of -1 is used, it will choose an automatic value depending on the encoder. Default value is 0. b\_qfactor float (_encoding,video_) Set qp factor between P and B frames. codec\_tag integer bug flags (_decoding,video_) Workaround not auto detected encoder bugs. Possible values: ‘autodetect’ ‘xvid\_ilace’ Xvid interlacing bug (autodetected if fourcc==XVIX) ‘ump4’ (autodetected if fourcc==UMP4) ‘no\_padding’ padding bug (autodetected) ‘amv’ ‘qpel\_chroma’ ‘std\_qpel’ old standard qpel (autodetected per fourcc/version) ‘qpel\_chroma2’ ‘direct\_blocksize’ direct-qpel-blocksize bug (autodetected per fourcc/version) ‘edge’ edge padding bug (autodetected per fourcc/version) ‘hpel\_chroma’ ‘dc\_clip’ ‘ms’ Workaround various bugs in microsoft broken decoders. ‘trunc’ trancated frames strict integer (_decoding/encoding,audio,video_) Specify how strictly to follow the standards. Possible values: ‘very’ strictly conform to an older more strict version of the spec or reference software ‘strict’ strictly conform to all the things in the spec no matter what consequences ‘normal’ ‘unofficial’ allow unofficial extensions ‘experimental’ allow non standardized experimental things, experimental (unfinished/work in progress/not well tested) decoders and encoders. Note: experimental decoders can pose a security risk, do not use this for decoding untrusted input. b\_qoffset float (_encoding,video_) Set QP offset between P and B frames. err\_detect flags (_decoding,audio,video_) Set error detection flags. Possible values: ‘crccheck’ verify embedded CRCs ‘bitstream’ detect bitstream specification deviations ‘buffer’ detect improper bitstream length ‘explode’ abort decoding on minor error detection ‘ignore\_err’ ignore decoding errors, and continue decoding. This is useful if you want to analyze the content of a video and thus want everything to be decoded no matter what. This option will not result in a video that is pleasing to watch in case of errors. ‘careful’ consider things that violate the spec and have not been seen in the wild as errors ‘compliant’ consider all spec non compliancies as errors ‘aggressive’ consider things that a sane encoder should not do as an error has\_b\_frames integer block\_align integer rc\_override\_count integer maxrate integer (_encoding,audio,video_) Set max bitrate tolerance (in bits/s). Requires bufsize to be set. minrate integer (_encoding,audio,video_) Set min bitrate tolerance (in bits/s). Most useful in setting up a CBR encode. It is of little use elsewise. bufsize integer (_encoding,audio,video_) Set ratecontrol buffer size (in bits). i\_qfactor float (_encoding,video_) Set QP factor between P and I frames. i\_qoffset float (_encoding,video_) Set QP offset between P and I frames. dct integer (_encoding,video_) Set DCT algorithm. Possible values: ‘auto’ autoselect a good one (default) ‘fastint’ fast integer ‘int’ accurate integer ‘mmx’ ‘altivec’ ‘faan’ floating point AAN DCT lumi\_mask float (_encoding,video_) Compress bright areas stronger than medium ones. tcplx\_mask float (_encoding,video_) Set temporal complexity masking. scplx\_mask float (_encoding,video_) Set spatial complexity masking. p\_mask float (_encoding,video_) Set inter masking. dark\_mask float (_encoding,video_) Compress dark areas stronger than medium ones. idct integer (_decoding/encoding,video_) Select IDCT implementation. Possible values: ‘auto’ ‘int’ ‘simple’ ‘simplemmx’ ‘simpleauto’ Automatically pick a IDCT compatible with the simple one ‘arm’ ‘altivec’ ‘sh4’ ‘simplearm’ ‘simplearmv5te’ ‘simplearmv6’ ‘simpleneon’ ‘xvid’ ‘faani’ floating point AAN IDCT slice\_count integer ec flags (_decoding,video_) Set error concealment strategy. Possible values: ‘guess\_mvs’ iterative motion vector (MV) search (slow) ‘deblock’ use strong deblock filter for damaged MBs ‘favor\_inter’ favor predicting from the previous frame instead of the current bits\_per\_coded\_sample integer aspect rational number (_encoding,video_) Set sample aspect ratio. sar rational number (_encoding,video_) Set sample aspect ratio. Alias to aspect. debug flags (_decoding/encoding,audio,video,subtitles_) Print specific debug info. Possible values: ‘pict’ picture info ‘rc’ rate control ‘bitstream’ ‘mb\_type’ macroblock (MB) type ‘qp’ per-block quantization parameter (QP) ‘dct\_coeff’ ‘green\_metadata’ display complexity metadata for the upcoming frame, GoP or for a given duration. ‘skip’ ‘startcode’ ‘er’ error recognition ‘mmco’ memory management control operations (H.264) ‘bugs’ ‘buffers’ picture buffer allocations ‘thread\_ops’ threading operations ‘nomc’ skip motion compensation cmp integer (_encoding,video_) Set full pel me compare function. Possible values: ‘sad’ sum of absolute differences, fast (default) ‘sse’ sum of squared errors ‘satd’ sum of absolute Hadamard transformed differences ‘dct’ sum of absolute DCT transformed differences ‘psnr’ sum of squared quantization errors (avoid, low quality) ‘bit’ number of bits needed for the block ‘rd’ rate distortion optimal, slow ‘zero’ 0 ‘vsad’ sum of absolute vertical differences ‘vsse’ sum of squared vertical differences ‘nsse’ noise preserving sum of squared differences ‘w53’ 5/3 wavelet, only used in snow ‘w97’ 9/7 wavelet, only used in snow ‘dctmax’ ‘chroma’ subcmp integer (_encoding,video_) Set sub pel me compare function. Possible values: ‘sad’ sum of absolute differences, fast (default) ‘sse’ sum of squared errors ‘satd’ sum of absolute Hadamard transformed differences ‘dct’ sum of absolute DCT transformed differences ‘psnr’ sum of squared quantization errors (avoid, low quality) ‘bit’ number of bits needed for the block ‘rd’ rate distortion optimal, slow ‘zero’ 0 ‘vsad’ sum of absolute vertical differences ‘vsse’ sum of squared vertical differences ‘nsse’ noise preserving sum of squared differences ‘w53’ 5/3 wavelet, only used in snow ‘w97’ 9/7 wavelet, only used in snow ‘dctmax’ ‘chroma’ mbcmp integer (_encoding,video_) Set macroblock compare function. Possible values: ‘sad’ sum of absolute differences, fast (default) ‘sse’ sum of squared errors ‘satd’ sum of absolute Hadamard transformed differences ‘dct’ sum of absolute DCT transformed differences ‘psnr’ sum of squared quantization errors (avoid, low quality) ‘bit’ number of bits needed for the block ‘rd’ rate distortion optimal, slow ‘zero’ 0 ‘vsad’ sum of absolute vertical differences ‘vsse’ sum of squared vertical differences ‘nsse’ noise preserving sum of squared differences ‘w53’ 5/3 wavelet, only used in snow ‘w97’ 9/7 wavelet, only used in snow ‘dctmax’ ‘chroma’ ildctcmp integer (_encoding,video_) Set interlaced dct compare function. Possible values: ‘sad’ sum of absolute differences, fast (default) ‘sse’ sum of squared errors ‘satd’ sum of absolute Hadamard transformed differences ‘dct’ sum of absolute DCT transformed differences ‘psnr’ sum of squared quantization errors (avoid, low quality) ‘bit’ number of bits needed for the block ‘rd’ rate distortion optimal, slow ‘zero’ 0 ‘vsad’ sum of absolute vertical differences ‘vsse’ sum of squared vertical differences ‘nsse’ noise preserving sum of squared differences ‘w53’ 5/3 wavelet, only used in snow ‘w97’ 9/7 wavelet, only used in snow ‘dctmax’ ‘chroma’ dia\_size integer (_encoding,video_) Set diamond type & size for motion estimation. ‘(1024, INT\_MAX)’ full motion estimation(slowest) ‘(768, 1024\]’ umh motion estimation ‘(512, 768\]’ hex motion estimation ‘(256, 512\]’ l2s diamond motion estimation ‘\[2,256\]’ var diamond motion estimation ‘(-1, 2)’ small diamond motion estimation ‘\-1’ funny diamond motion estimation ‘(INT\_MIN, -1)’ sab diamond motion estimation last\_pred integer (_encoding,video_) Set amount of motion predictors from the previous frame. precmp integer (_encoding,video_) Set pre motion estimation compare function. Possible values: ‘sad’ sum of absolute differences, fast (default) ‘sse’ sum of squared errors ‘satd’ sum of absolute Hadamard transformed differences ‘dct’ sum of absolute DCT transformed differences ‘psnr’ sum of squared quantization errors (avoid, low quality) ‘bit’ number of bits needed for the block ‘rd’ rate distortion optimal, slow ‘zero’ 0 ‘vsad’ sum of absolute vertical differences ‘vsse’ sum of squared vertical differences ‘nsse’ noise preserving sum of squared differences ‘w53’ 5/3 wavelet, only used in snow ‘w97’ 9/7 wavelet, only used in snow ‘dctmax’ ‘chroma’ pre\_dia\_size integer (_encoding,video_) Set diamond type & size for motion estimation pre-pass. subq integer (_encoding,video_) Set sub pel motion estimation quality. me\_range integer (_encoding,video_) Set limit motion vectors range (1023 for DivX player). global\_quality integer (_encoding,audio,video_) slice\_flags integer mbd integer (_encoding,video_) Set macroblock decision algorithm (high quality mode). Possible values: ‘simple’ use mbcmp (default) ‘bits’ use fewest bits ‘rd’ use best rate distortion rc\_init\_occupancy integer (_encoding,video_) Set number of bits which should be loaded into the rc buffer before decoding starts. flags2 flags (_decoding/encoding,audio,video,subtitles_) Possible values: ‘fast’ Allow non spec compliant speedup tricks. ‘noout’ Skip bitstream encoding. ‘ignorecrop’ Ignore cropping information from sps. ‘local\_header’ Place global headers at every keyframe instead of in extradata. ‘chunks’ Frame data might be split into multiple chunks. ‘showall’ Show all frames before the first keyframe. ‘export\_mvs’ Export motion vectors into frame side-data (see `AV_FRAME_DATA_MOTION_VECTORS`) for codecs that support it. See also doc/examples/export\_mvs.c. ‘skip\_manual’ Do not skip samples and export skip information as frame side data. ‘ass\_ro\_flush\_noop’ Do not reset ASS ReadOrder field on flush. ‘icc\_profiles’ Generate/parse embedded ICC profiles from/to colorimetry tags. export\_side\_data flags (_decoding/encoding,audio,video,subtitles_) Possible values: ‘mvs’ Export motion vectors into frame side-data (see `AV_FRAME_DATA_MOTION_VECTORS`) for codecs that support it. See also doc/examples/export\_mvs.c. ‘prft’ Export encoder Producer Reference Time into packet side-data (see `AV_PKT_DATA_PRFT`) for codecs that support it. ‘venc\_params’ Export video encoding parameters through frame side data (see `AV_FRAME_DATA_VIDEO_ENC_PARAMS`) for codecs that support it. At present, those are H.264 and VP9. ‘film\_grain’ Export film grain parameters through frame side data (see `AV_FRAME_DATA_FILM_GRAIN_PARAMS`). Supported at present by AV1 decoders. ‘enhancements’ Export picture enhancement metadata through frame side data, e.g. LCEVC (see `AV_FRAME_DATA_LCEVC`). threads integer (_decoding/encoding,video_) Set the number of threads to be used, in case the selected codec implementation supports multi-threading. Possible values: ‘auto, 0’ automatically select the number of threads to set Default value is ‘auto’. dc integer (_encoding,video_) Set intra\_dc\_precision. nssew integer (_encoding,video_) Set nsse weight. skip\_top integer (_decoding,video_) Set number of macroblock rows at the top which are skipped. skip\_bottom integer (_decoding,video_) Set number of macroblock rows at the bottom which are skipped. profile integer (_encoding,audio,video_) Set encoder codec profile. Default value is ‘unknown’. Encoder specific profiles are documented in the relevant encoder documentation. level integer (_encoding,audio,video_) Set the encoder level. This level depends on the specific codec, and might correspond to the profile level. It is set by default to ‘unknown’. Possible values: ‘unknown’ lowres integer (_decoding,audio,video_) Decode at 1= 1/2, 2=1/4, 3=1/8 resolutions. mblmin integer (_encoding,video_) Set min macroblock lagrange factor (VBR). mblmax integer (_encoding,video_) Set max macroblock lagrange factor (VBR). skip\_loop\_filter integer (_decoding,video_) skip\_idct integer (_decoding,video_) skip\_frame integer (_decoding,video_) Make decoder discard processing depending on the frame type selected by the option value. skip\_loop\_filter skips frame loop filtering, skip\_idct skips frame IDCT/dequantization, skip\_frame skips decoding. Possible values: ‘none’ Discard no frame. ‘default’ Discard useless frames like 0-sized frames. ‘noref’ Discard all non-reference frames. ‘bidir’ Discard all bidirectional frames. ‘nokey’ Discard all frames excepts keyframes. ‘nointra’ Discard all frames except I frames. ‘all’ Discard all frames. Default value is ‘default’. bidir\_refine integer (_encoding,video_) Refine the two motion vectors used in bidirectional macroblocks. keyint\_min integer (_encoding,video_) Set minimum interval between IDR-frames. refs integer (_encoding,video_) Set reference frames to consider for motion compensation. trellis integer (_encoding,audio,video_) Set rate-distortion optimal quantization. mv0\_threshold integer (_encoding,video_) compression\_level integer (_encoding,audio,video_) bits\_per\_raw\_sample integer channel\_layout integer (_decoding/encoding,audio_) See (ffmpeg-utils)the Channel Layout section in the ffmpeg-utils(1) manual for the required syntax. rc\_max\_vbv\_use float (_encoding,video_) rc\_min\_vbv\_use float (_encoding,video_) color\_primaries integer (_decoding/encoding,video_) Possible values: ‘bt709’ BT.709 ‘bt470m’ BT.470 M ‘bt470bg’ BT.470 BG ‘smpte170m’ SMPTE 170 M ‘smpte240m’ SMPTE 240 M ‘film’ Film ‘bt2020’ BT.2020 ‘smpte428’ ‘smpte428\_1’ SMPTE ST 428-1 ‘smpte431’ SMPTE 431-2 ‘smpte432’ SMPTE 432-1 ‘jedec-p22’ JEDEC P22 color\_trc integer (_decoding/encoding,video_) Possible values: ‘bt709’ BT.709 ‘gamma22’ BT.470 M ‘gamma28’ BT.470 BG ‘smpte170m’ SMPTE 170 M ‘smpte240m’ SMPTE 240 M ‘linear’ Linear ‘log’ ‘log100’ Log ‘log\_sqrt’ ‘log316’ Log square root ‘iec61966\_2\_4’ ‘iec61966-2-4’ IEC 61966-2-4 ‘bt1361’ ‘bt1361e’ BT.1361 ‘iec61966\_2\_1’ ‘iec61966-2-1’ IEC 61966-2-1 ‘bt2020\_10’ ‘bt2020\_10bit’ BT.2020 - 10 bit ‘bt2020\_12’ ‘bt2020\_12bit’ BT.2020 - 12 bit ‘smpte2084’ SMPTE ST 2084 ‘smpte428’ ‘smpte428\_1’ SMPTE ST 428-1 ‘arib-std-b67’ ARIB STD-B67 colorspace integer (_decoding/encoding,video_) Possible values: ‘rgb’ RGB ‘bt709’ BT.709 ‘fcc’ FCC ‘bt470bg’ BT.470 BG ‘smpte170m’ SMPTE 170 M ‘smpte240m’ SMPTE 240 M ‘ycocg’ YCOCG ‘bt2020nc’ ‘bt2020\_ncl’ BT.2020 NCL ‘bt2020c’ ‘bt2020\_cl’ BT.2020 CL ‘smpte2085’ SMPTE 2085 ‘chroma-derived-nc’ Chroma-derived NCL ‘chroma-derived-c’ Chroma-derived CL ‘ictcp’ ICtCp color\_range integer (_decoding/encoding,video_) If used as input parameter, it serves as a hint to the decoder, which color\_range the input has. Possible values: ‘tv’ ‘mpeg’ ‘limited’ MPEG (219\*2^(n-8)) ‘pc’ ‘jpeg’ ‘full’ JPEG (2^n-1) chroma\_sample\_location integer (_decoding/encoding,video_) Possible values: ‘left’ ‘center’ ‘topleft’ ‘top’ ‘bottomleft’ ‘bottom’ log\_level\_offset integer Set the log level offset. slices integer (_encoding,video_) Number of slices, used in parallelized encoding. thread\_type flags (_decoding/encoding,video_) Select which multithreading methods to use. Use of ‘frame’ will increase decoding delay by one frame per thread, so clients which cannot provide future frames should not use it. Possible values: ‘slice’ Decode more than one part of a single frame at once. Multithreading using slices works only when the video was encoded with slices. ‘frame’ Decode more than one frame at once. Default value is ‘slice+frame’. audio\_service\_type integer (_encoding,audio_) Set audio service type. Possible values: ‘ma’ Main Audio Service ‘ef’ Effects ‘vi’ Visually Impaired ‘hi’ Hearing Impaired ‘di’ Dialogue ‘co’ Commentary ‘em’ Emergency ‘vo’ Voice Over ‘ka’ Karaoke request\_sample\_fmt sample\_fmt (_decoding,audio_) Set sample format audio decoders should prefer. Default value is `none`. pkt\_timebase rational number sub\_charenc encoding (_decoding,subtitles_) Set the input subtitles character encoding. field\_order field\_order (_video_) Set/override the field order of the video. Possible values: ‘progressive’ Progressive video ‘tt’ Interlaced video, top field coded and displayed first ‘bb’ Interlaced video, bottom field coded and displayed first ‘tb’ Interlaced video, top coded first, bottom displayed first ‘bt’ Interlaced video, bottom coded first, top displayed first skip\_alpha bool (_decoding,video_) Set to 1 to disable processing alpha (transparency). This works like the ‘gray’ flag in the flags option which skips chroma information instead of alpha. Default is 0. codec\_whitelist list (_input_) "," separated list of allowed decoders. By default all are allowed. dump\_separator string (_input_) Separator used to separate the fields printed on the command line about the Stream parameters. For example, to separate the fields with newlines and indentation: ffprobe -dump\_separator " " -i ~/videos/matrixbench\_mpeg2.mpg max\_pixels integer (_decoding/encoding,video_) Maximum number of pixels per image. This value can be used to avoid out of memory failures due to large images. apply\_cropping bool (_decoding,video_) Enable cropping if cropping parameters are multiples of the required alignment for the left and top parameters. If the alignment is not met the cropping will be partially applied to maintain alignment. Default is 1 (enabled). Note: The required alignment depends on if `AV_CODEC_FLAG_UNALIGNED` is set and the CPU. `AV_CODEC_FLAG_UNALIGNED` cannot be changed from the command line. Also hardware decoders will not apply left/top Cropping. ## 10 Decoders Decoders are configured elements in FFmpeg which allow the decoding of multimedia streams. When you configure your FFmpeg build, all the supported native decoders are enabled by default. Decoders requiring an external library must be enabled manually via the corresponding `--enable-lib` option. You can list all available decoders using the configure option `--list-decoders`. You can disable all the decoders with the configure option `--disable-decoders` and selectively enable / disable single decoders with the options `--enable-decoder=DECODER` / `--disable-decoder=DECODER`. The option `-decoders` of the ff\* tools will display the list of enabled decoders. ## 11 Video Decoders A description of some of the currently available video decoders follows. ### 11.1 av1 AOMedia Video 1 (AV1) decoder. #### 11.1.1 Options operating\_point Select an operating point of a scalable AV1 bitstream (0 - 31). Default is 0. ### 11.2 hevc HEVC (AKA ITU-T H.265 or ISO/IEC 23008-2) decoder. The decoder supports MV-HEVC multiview streams with at most two views. Views to be output are selected by supplying a list of view IDs to the decoder (the view\_ids option). This option may be set either statically before decoder init, or from the `get_format()` callback - useful for the case when the view count or IDs change dynamically during decoding. Only the base layer is decoded by default. Note that if you are using the `ffmpeg` CLI tool, you should be using view specifiers as documented in its manual, rather than the options documented here. #### 11.2.1 Options view\_ids (MV-HEVC) Specify a list of view IDs that should be output. This option can also be set to a single ’-1’, which will cause all views defined in the VPS to be decoded and output. view\_ids\_available (MV-HEVC) This option may be read by the caller to retrieve an array of view IDs available in the active VPS. The array is empty for single-layer video. The value of this option is guaranteed to be accurate when read from the `get_format()` callback. It may also be set at other times (e.g. after opening the decoder), but the value is informational only and may be incorrect (e.g. when the stream contains multiple distinct VPS NALUs). view\_pos\_available (MV-HEVC) This option may be read by the caller to retrieve an array of view positions (left, right, or unspecified) available in the active VPS, as `AVStereo3DView` values. When the array is available, its elements apply to the corresponding elements of view\_ids\_available, i.e. `view_pos_available[i]` contains the position of view with ID `view_ids_available[i]`. Same validity restrictions as for view\_ids\_available apply to this option. ### 11.3 rawvideo Raw video decoder. This decoder decodes rawvideo streams. #### 11.3.1 Options top top\_field\_first Specify the assumed field type of the input video. \-1 the video is assumed to be progressive (default) 0 bottom-field-first is assumed 1 top-field-first is assumed ### 11.4 libdav1d dav1d AV1 decoder. libdav1d allows libavcodec to decode the AOMedia Video 1 (AV1) codec. Requires the presence of the libdav1d headers and library during configuration. You need to explicitly configure the build with `--enable-libdav1d`. #### 11.4.1 Options The following options are supported by the libdav1d wrapper. framethreads Set amount of frame threads to use during decoding. The default value is 0 (autodetect). This option is deprecated for libdav1d >= 1.0 and will be removed in the future. Use the option `max_frame_delay` and the global option `threads` instead. tilethreads Set amount of tile threads to use during decoding. The default value is 0 (autodetect). This option is deprecated for libdav1d >= 1.0 and will be removed in the future. Use the global option `threads` instead. max\_frame\_delay Set max amount of frames the decoder may buffer internally. The default value is 0 (autodetect). filmgrain Apply film grain to the decoded video if present in the bitstream. Defaults to the internal default of the library. This option is deprecated and will be removed in the future. See the global option `export_side_data` to export Film Grain parameters instead of applying it. oppoint Select an operating point of a scalable AV1 bitstream (0 - 31). Defaults to the internal default of the library. alllayers Output all spatial layers of a scalable AV1 bitstream. The default value is false. ### 11.5 libdavs2 AVS2-P2/IEEE1857.4 video decoder wrapper. This decoder allows libavcodec to decode AVS2 streams with davs2 library. ### 11.6 libuavs3d AVS3-P2/IEEE1857.10 video decoder. libuavs3d allows libavcodec to decode AVS3 streams. Requires the presence of the libuavs3d headers and library during configuration. You need to explicitly configure the build with `--enable-libuavs3d`. #### 11.6.1 Options The following option is supported by the libuavs3d wrapper. frame\_threads Set amount of frame threads to use during decoding. The default value is 0 (autodetect). ### 11.7 libxevd eXtra-fast Essential Video Decoder (XEVD) MPEG-5 EVC decoder wrapper. This decoder requires the presence of the libxevd headers and library during configuration. You need to explicitly configure the build with \--enable-libxevd. The xevd project website is at https://github.com/mpeg5/xevd. #### 11.7.1 Options The following options are supported by the libxevd wrapper. The xevd-equivalent options or values are listed in parentheses for easy migration. To get a more accurate and extensive documentation of the libxevd options, invoke the command `xevd_app --help` or consult the libxevd documentation. threads (_threads_) Force to use a specific number of threads ### 11.8 QSV Decoders The family of Intel QuickSync Video decoders (VC1, MPEG-2, H.264, HEVC, JPEG/MJPEG, VP8, VP9, AV1, VVC). #### 11.8.1 Common Options The following options are supported by all qsv decoders. async\_depth Internal parallelization depth, the higher the value the higher the latency. gpu\_copy A GPU-accelerated copy between video and system memory ‘default’ ‘on’ ‘off’ #### 11.8.2 HEVC Options Extra options for hevc\_qsv. load\_plugin A user plugin to load in an internal session ‘none’ ‘hevc\_sw’ ‘hevc\_hw’ load\_plugins A :-separate list of hexadecimal plugin UIDs to load in an internal session ### 11.9 v210 Uncompressed 4:2:2 10-bit decoder. #### 11.9.1 Options custom\_stride Set the line size of the v210 data in bytes. The default value is 0 (autodetect). You can use the special -1 value for a strideless v210 as seen in BOXX files. ## 12 Audio Decoders A description of some of the currently available audio decoders follows. ### 12.1 ac3 AC-3 audio decoder. This decoder implements part of ATSC A/52:2010 and ETSI TS 102 366, as well as the undocumented RealAudio 3 (a.k.a. dnet). #### 12.1.1 AC-3 Decoder Options \-drc\_scale value Dynamic Range Scale Factor. The factor to apply to dynamic range values from the AC-3 stream. This factor is applied exponentially. The default value is 1. There are 3 notable scale factor ranges: drc\_scale == 0 DRC disabled. Produces full range audio. 0 < drc\_scale <= 1 DRC enabled. Applies a fraction of the stream DRC value. Audio reproduction is between full range and full compression. drc\_scale > 1 DRC enabled. Applies drc\_scale asymmetrically. Loud sounds are fully compressed. Soft sounds are enhanced. ### 12.2 flac FLAC audio decoder. This decoder aims to implement the complete FLAC specification from Xiph. #### 12.2.1 FLAC Decoder options \-use\_buggy\_lpc The lavc FLAC encoder used to produce buggy streams with high lpc values (like the default value). This option makes it possible to decode such streams correctly by using lavc’s old buggy lpc logic for decoding. ### 12.3 ffwavesynth Internal wave synthesizer. This decoder generates wave patterns according to predefined sequences. Its use is purely internal and the format of the data it accepts is not publicly documented. ### 12.4 libcelt libcelt decoder wrapper. libcelt allows libavcodec to decode the Xiph CELT ultra-low delay audio codec. Requires the presence of the libcelt headers and library during configuration. You need to explicitly configure the build with `--enable-libcelt`. ### 12.5 libgsm libgsm decoder wrapper. libgsm allows libavcodec to decode the GSM full rate audio codec. Requires the presence of the libgsm headers and library during configuration. You need to explicitly configure the build with `--enable-libgsm`. This decoder supports both the ordinary GSM and the Microsoft variant. ### 12.6 libilbc libilbc decoder wrapper. libilbc allows libavcodec to decode the Internet Low Bitrate Codec (iLBC) audio codec. Requires the presence of the libilbc headers and library during configuration. You need to explicitly configure the build with `--enable-libilbc`. #### 12.6.1 Options The following option is supported by the libilbc wrapper. enhance Enable the enhancement of the decoded audio when set to 1. The default value is 0 (disabled). ### 12.7 libopencore-amrnb libopencore-amrnb decoder wrapper. libopencore-amrnb allows libavcodec to decode the Adaptive Multi-Rate Narrowband audio codec. Using it requires the presence of the libopencore-amrnb headers and library during configuration. You need to explicitly configure the build with `--enable-libopencore-amrnb`. An FFmpeg native decoder for AMR-NB exists, so users can decode AMR-NB without this library. ### 12.8 libopencore-amrwb libopencore-amrwb decoder wrapper. libopencore-amrwb allows libavcodec to decode the Adaptive Multi-Rate Wideband audio codec. Using it requires the presence of the libopencore-amrwb headers and library during configuration. You need to explicitly configure the build with `--enable-libopencore-amrwb`. An FFmpeg native decoder for AMR-WB exists, so users can decode AMR-WB without this library. ### 12.9 libopus libopus decoder wrapper. libopus allows libavcodec to decode the Opus Interactive Audio Codec. Requires the presence of the libopus headers and library during configuration. You need to explicitly configure the build with `--enable-libopus`. An FFmpeg native decoder for Opus exists, so users can decode Opus without this library. ## 13 Subtitles Decoders ### 13.1 libaribb24 ARIB STD-B24 caption decoder. Implements profiles A and C of the ARIB STD-B24 standard. #### 13.1.1 libaribb24 Decoder Options \-aribb24-base-path path Sets the base path for the libaribb24 library. This is utilized for reading of configuration files (for custom unicode conversions), and for dumping of non-text symbols as images under that location. Unset by default. \-aribb24-skip-ruby-text boolean Tells the decoder wrapper to skip text blocks that contain half-height ruby text. Enabled by default. ### 13.2 libaribcaption Yet another ARIB STD-B24 caption decoder using external _libaribcaption_ library. Implements profiles A and C of the Japanse ARIB STD-B24 standard, Brazilian ABNT NBR 15606-1, and Philippines version of ISDB-T. Requires the presence of the libaribcaption headers and library (https://github.com/xqq/libaribcaption) during configuration. You need to explicitly configure the build with `--enable-libaribcaption`. If both _libaribb24_ and _libaribcaption_ are enabled, _libaribcaption_ decoder precedes. #### 13.2.1 libaribcaption Decoder Options \-sub\_type subtitle\_type Specifies the format of the decoded subtitles. ‘bitmap’ Graphical image. ‘ass’ ASS formatted text. ‘text’ Simple text based output without formatting. The default is _ass_ as same as _libaribb24_ decoder. Some present players (e.g., _mpv_) expect ASS format for ARIB caption. \-caption\_encoding encoding\_scheme Specifies the encoding scheme of input subtitle text. ‘auto’ Automatically detect text encoding (default). ‘jis’ 8bit-char JIS encoding defined in ARIB STD B24. This encoding used in Japan for ISDB captions. ‘utf8’ UTF-8 encoding defined in ARIB STD B24. This encoding is used in Philippines for ISDB-T captions. ‘latin’ Latin character encoding defined in ABNT NBR 15606-1. This encoding is used in South America for SBTVD / ISDB-Tb captions. \-font font\_name\[,font\_name2,...\] Specify comma-separated list of font family names to be used for _bitmap_ or _ass_ type subtitle rendering. Only first font name is used for _ass_ type subtitle. If not specified, use internaly defined default font family. \-ass\_single\_rect boolean ARIB STD-B24 specifies that some captions may be displayed at different positions at a time (multi-rectangle subtitle). Since some players (e.g., old _mpv_) can’t handle multiple ASS rectangles in a single AVSubtitle, or multiple ASS rectangles of indeterminate duration with the same start timestamp, this option can change the behavior so that all the texts are displayed in a single ASS rectangle. The default is false. If your player cannot handle AVSubtitles with multiple ASS rectangles properly, set this option to true or define `ASS_SINGLE_RECT=1` to change default behavior at compilation. \-force\_outline\_text boolean Specify whether always render outline text for all characters regardless of the indication by charactor style. The default is false. \-outline\_width number (0.0 - 3.0) Specify width for outline text, in dots (relative). The default is 1.5. \-ignore\_background boolean Specify whether to ignore background color rendering. The default is false. \-ignore\_ruby boolean Specify whether to ignore rendering for ruby-like (furigana) characters. The default is false. \-replace\_drcs boolean Specify whether to render replaced DRCS characters as Unicode characters. The default is true. \-replace\_msz\_ascii boolean Specify whether to replace MSZ (Middle Size; half width) fullwidth alphanumerics with halfwidth alphanumerics. The default is true. \-replace\_msz\_japanese boolean Specify whether to replace some MSZ (Middle Size; half width) fullwidth japanese special characters with halfwidth ones. The default is true. \-replace\_msz\_glyph boolean Specify whether to replace MSZ (Middle Size; half width) characters with halfwidth glyphs if the fonts supports it. This option works under FreeType or DirectWrite renderer with Adobe-Japan1 compliant fonts. e.g., IBM Plex Sans JP, Morisawa BIZ UDGothic, Morisawa BIZ UDMincho, Yu Gothic, Yu Mincho, and Meiryo. The default is true. \-canvas\_size image\_size Specify the resolution of the canvas to render subtitles to; usually, this should be frame size of input video. This only applies when `-subtitle_type` is set to bitmap. The libaribcaption decoder assumes input frame size for bitmap rendering as below: 1. PROFILE\_A : 1440 x 1080 with SAR (PAR) 4:3 2. PROFILE\_C : 320 x 180 with SAR (PAR) 1:1 If actual frame size of input video does not match above assumption, the rendered captions may be distorted. To make the captions undistorted, add `-canvas_size` option to specify actual input video size. Note that the `-canvas_size` option is not required for video with different size but same aspect ratio. In such cases, the caption will be stretched or shrunk to actual video size if `-canvas_size` option is not specified. If `-canvas_size` option is specified with different size, the caption will be stretched or shrunk as specified size with calculated SAR. #### 13.2.2 libaribcaption decoder usage examples Display MPEG-TS file with ARIB subtitle by `ffplay` tool: ffplay -sub\_type bitmap MPEG.TS Display MPEG-TS file with input frame size 1920x1080 by `ffplay` tool: ffplay -sub\_type bitmap -canvas\_size 1920x1080 MPEG.TS Embed ARIB subtitle in transcoded video: ffmpeg -sub\_type bitmap -i src.m2t -filter\_complex "\[0:v\]\[0:s\]overlay" -vcodec h264 dest.mp4 ### 13.3 dvbsub #### 13.3.1 Options compute\_clut \-2 Compute clut once if no matching CLUT is in the stream. \-1 Compute clut if no matching CLUT is in the stream. 0 Never compute CLUT 1 Always compute CLUT and override the one provided in the stream. dvb\_substream Selects the dvb substream, or all substreams if -1 which is default. ### 13.4 dvdsub This codec decodes the bitmap subtitles used in DVDs; the same subtitles can also be found in VobSub file pairs and in some Matroska files. #### 13.4.1 Options palette Specify the global palette used by the bitmaps. When stored in VobSub, the palette is normally specified in the index file; in Matroska, the palette is stored in the codec extra-data in the same format as in VobSub. In DVDs, the palette is stored in the IFO file, and therefore not available when reading from dumped VOB files. The format for this option is a string containing 16 24-bits hexadecimal numbers (without 0x prefix) separated by commas, for example `0d00ee, ee450d, 101010, eaeaea, 0ce60b, ec14ed, ebff0b, 0d617a, 7b7b7b, d1d1d1, 7b2a0e, 0d950c, 0f007b, cf0dec, cfa80c, 7c127b`. ifo\_palette Specify the IFO file from which the global palette is obtained. (experimental) forced\_subs\_only Only decode subtitle entries marked as forced. Some titles have forced and non-forced subtitles in the same track. Setting this flag to `1` will only keep the forced subtitles. Default value is `0`. ### 13.5 libzvbi-teletext Libzvbi allows libavcodec to decode DVB teletext pages and DVB teletext subtitles. Requires the presence of the libzvbi headers and library during configuration. You need to explicitly configure the build with `--enable-libzvbi`. #### 13.5.1 Options txt\_page List of teletext page numbers to decode. Pages that do not match the specified list are dropped. You may use the special `*` string to match all pages, or `subtitle` to match all subtitle pages. Default value is \*. txt\_default\_region Set default character set used for decoding, a value between 0 and 87 (see ETS 300 706, Section 15, Table 32). Default value is -1, which does not override the libzvbi default. This option is needed for some legacy level 1.0 transmissions which cannot signal the proper charset. txt\_chop\_top Discards the top teletext line. Default value is 1. txt\_format Specifies the format of the decoded subtitles. bitmap The default format, you should use this for teletext pages, because certain graphics and colors cannot be expressed in simple text or even ASS. text Simple text based output without formatting. ass Formatted ASS output, subtitle pages and teletext pages are returned in different styles, subtitle pages are stripped down to text, but an effort is made to keep the text alignment and the formatting. txt\_left X offset of generated bitmaps, default is 0. txt\_top Y offset of generated bitmaps, default is 0. txt\_chop\_spaces Chops leading and trailing spaces and removes empty lines from the generated text. This option is useful for teletext based subtitles where empty spaces may be present at the start or at the end of the lines or empty lines may be present between the subtitle lines because of double-sized teletext characters. Default value is 1. txt\_duration Sets the display duration of the decoded teletext pages or subtitles in milliseconds. Default value is -1 which means infinity or until the next subtitle event comes. txt\_transparent Force transparent background of the generated teletext bitmaps. Default value is 0 which means an opaque background. txt\_opacity Sets the opacity (0-255) of the teletext background. If txt\_transparent is not set, it only affects characters between a start box and an end box, typically subtitles. Default value is 0 if txt\_transparent is set, 255 otherwise. ## 14 Encoders Encoders are configured elements in FFmpeg which allow the encoding of multimedia streams. When you configure your FFmpeg build, all the supported native encoders are enabled by default. Encoders requiring an external library must be enabled manually via the corresponding `--enable-lib` option. You can list all available encoders using the configure option `--list-encoders`. You can disable all the encoders with the configure option `--disable-encoders` and selectively enable / disable single encoders with the options `--enable-encoder=ENCODER` / `--disable-encoder=ENCODER`. The option `-encoders` of the ff\* tools will display the list of enabled encoders. ## 15 Audio Encoders A description of some of the currently available audio encoders follows. ### 15.1 aac Advanced Audio Coding (AAC) encoder. This encoder is the default AAC encoder, natively implemented into FFmpeg. #### 15.1.1 Options b Set bit rate in bits/s. Setting this automatically activates constant bit rate (CBR) mode. If this option is unspecified it is set to 128kbps. q Set quality for variable bit rate (VBR) mode. This option is valid only using the `ffmpeg` command-line tool. For library interface users, use global\_quality. cutoff Set cutoff frequency. If unspecified will allow the encoder to dynamically adjust the cutoff to improve clarity on low bitrates. aac\_coder Set AAC encoder coding method. Possible values: ‘twoloop’ Two loop searching (TLS) method. This is the default method. This method first sets quantizers depending on band thresholds and then tries to find an optimal combination by adding or subtracting a specific value from all quantizers and adjusting some individual quantizer a little. Will tune itself based on whether aac\_is, aac\_ms and aac\_pns are enabled. ‘anmr’ Average noise to mask ratio (ANMR) trellis-based solution. This is an experimental coder which currently produces a lower quality, is more unstable and is slower than the default twoloop coder but has potential. Currently has no support for the aac\_is or aac\_pns options. Not currently recommended. ‘fast’ Constant quantizer method. Uses a cheaper version of twoloop algorithm that doesn’t try to do as many clever adjustments. Worse with low bitrates (less than 64kbps), but is better and much faster at higher bitrates. aac\_ms Sets mid/side coding mode. The default value of "auto" will automatically use M/S with bands which will benefit from such coding. Can be forced for all bands using the value "enable", which is mainly useful for debugging or disabled using "disable". aac\_is Sets intensity stereo coding tool usage. By default, it’s enabled and will automatically toggle IS for similar pairs of stereo bands if it’s beneficial. Can be disabled for debugging by setting the value to "disable". aac\_pns Uses perceptual noise substitution to replace low entropy high frequency bands with imperceptible white noise during the decoding process. By default, it’s enabled, but can be disabled for debugging purposes by using "disable". aac\_tns Enables the use of a multitap FIR filter which spans through the high frequency bands to hide quantization noise during the encoding process and is reverted by the decoder. As well as decreasing unpleasant artifacts in the high range this also reduces the entropy in the high bands and allows for more bits to be used by the mid-low bands. By default it’s enabled but can be disabled for debugging by setting the option to "disable". aac\_ltp Enables the use of the long term prediction extension which increases coding efficiency in very low bandwidth situations such as encoding of voice or solo piano music by extending constant harmonic peaks in bands throughout frames. This option is implied by profile:a aac\_low. Use in conjunction with \-ar to decrease the samplerate. profile Sets the encoding profile, possible values: ‘aac\_low’ The default, AAC "Low-complexity" profile. Is the most compatible and produces decent quality. ‘mpeg2\_aac\_low’ Equivalent to `-profile:a aac_low -aac_pns 0`. PNS was introduced with the MPEG4 specifications. ‘aac\_ltp’ Long term prediction profile, is enabled by and will enable the aac\_ltp option. Introduced in MPEG4. If this option is unspecified it is set to ‘aac\_low’. ### 15.2 ac3 and ac3\_fixed AC-3 audio encoders. These encoders implement part of ATSC A/52:2010 and ETSI TS 102 366. The ac3 encoder uses floating-point math, while the ac3\_fixed encoder only uses fixed-point integer math. This does not mean that one is always faster, just that one or the other may be better suited to a particular system. The ac3\_fixed encoder is not the default codec for any of the output formats, so it must be specified explicitly using the option `-acodec ac3_fixed` in order to use it. #### 15.2.1 AC-3 Metadata The AC-3 metadata options are used to set parameters that describe the audio, but in most cases do not affect the audio encoding itself. Some of the options do directly affect or influence the decoding and playback of the resulting bitstream, while others are just for informational purposes. A few of the options will add bits to the output stream that could otherwise be used for audio data, and will thus affect the quality of the output. Those will be indicated accordingly with a note in the option list below. These parameters are described in detail in several publicly-available documents. * A/52:2010 - Digital Audio Compression (AC-3) (E-AC-3) Standard * A/54 - Guide to the Use of the ATSC Digital Television Standard * Dolby Metadata Guide * Dolby Digital Professional Encoding Guidelines #### 15.2.1.1 Metadata Control Options \-per\_frame\_metadata boolean Allow Per-Frame Metadata. Specifies if the encoder should check for changing metadata for each frame. 0 The metadata values set at initialization will be used for every frame in the stream. (default) 1 Metadata values can be changed before encoding each frame. #### 15.2.1.2 Downmix Levels \-center\_mixlev level Center Mix Level. The amount of gain the decoder should apply to the center channel when downmixing to stereo. This field will only be written to the bitstream if a center channel is present. The value is specified as a scale factor. There are 3 valid values: 0.707 Apply -3dB gain 0.595 Apply -4.5dB gain (default) 0.500 Apply -6dB gain \-surround\_mixlev level Surround Mix Level. The amount of gain the decoder should apply to the surround channel(s) when downmixing to stereo. This field will only be written to the bitstream if one or more surround channels are present. The value is specified as a scale factor. There are 3 valid values: 0.707 Apply -3dB gain 0.500 Apply -6dB gain (default) 0.000 Silence Surround Channel(s) #### 15.2.1.3 Audio Production Information Audio Production Information is optional information describing the mixing environment. Either none or both of the fields are written to the bitstream. \-mixing\_level number Mixing Level. Specifies peak sound pressure level (SPL) in the production environment when the mix was mastered. Valid values are 80 to 111, or -1 for unknown or not indicated. The default value is -1, but that value cannot be used if the Audio Production Information is written to the bitstream. Therefore, if the `room_type` option is not the default value, the `mixing_level` option must not be -1. \-room\_type type Room Type. Describes the equalization used during the final mixing session at the studio or on the dubbing stage. A large room is a dubbing stage with the industry standard X-curve equalization; a small room has flat equalization. This field will not be written to the bitstream if both the `mixing_level` option and the `room_type` option have the default values. 0 notindicated Not Indicated (default) 1 large Large Room 2 small Small Room #### 15.2.1.4 Other Metadata Options \-copyright boolean Copyright Indicator. Specifies whether a copyright exists for this audio. 0 off No Copyright Exists (default) 1 on Copyright Exists \-dialnorm value Dialogue Normalization. Indicates how far the average dialogue level of the program is below digital 100% full scale (0 dBFS). This parameter determines a level shift during audio reproduction that sets the average volume of the dialogue to a preset level. The goal is to match volume level between program sources. A value of -31dB will result in no volume level change, relative to the source volume, during audio reproduction. Valid values are whole numbers in the range -31 to -1, with -31 being the default. \-dsur\_mode mode Dolby Surround Mode. Specifies whether the stereo signal uses Dolby Surround (Pro Logic). This field will only be written to the bitstream if the audio stream is stereo. Using this option does **NOT** mean the encoder will actually apply Dolby Surround processing. 0 notindicated Not Indicated (default) 1 off Not Dolby Surround Encoded 2 on Dolby Surround Encoded \-original boolean Original Bit Stream Indicator. Specifies whether this audio is from the original source and not a copy. 0 off Not Original Source 1 on Original Source (default) #### 15.2.2 Extended Bitstream Information The extended bitstream options are part of the Alternate Bit Stream Syntax as specified in Annex D of the A/52:2010 standard. It is grouped into 2 parts. If any one parameter in a group is specified, all values in that group will be written to the bitstream. Default values are used for those that are written but have not been specified. If the mixing levels are written, the decoder will use these values instead of the ones specified in the `center_mixlev` and `surround_mixlev` options if it supports the Alternate Bit Stream Syntax. #### 15.2.2.1 Extended Bitstream Information - Part 1 \-dmix\_mode mode Preferred Stereo Downmix Mode. Allows the user to select either Lt/Rt (Dolby Surround) or Lo/Ro (normal stereo) as the preferred stereo downmix mode. 0 notindicated Not Indicated (default) 1 ltrt Lt/Rt Downmix Preferred 2 loro Lo/Ro Downmix Preferred \-ltrt\_cmixlev level Lt/Rt Center Mix Level. The amount of gain the decoder should apply to the center channel when downmixing to stereo in Lt/Rt mode. 1.414 Apply +3dB gain 1.189 Apply +1.5dB gain 1.000 Apply 0dB gain 0.841 Apply -1.5dB gain 0.707 Apply -3.0dB gain 0.595 Apply -4.5dB gain (default) 0.500 Apply -6.0dB gain 0.000 Silence Center Channel \-ltrt\_surmixlev level Lt/Rt Surround Mix Level. The amount of gain the decoder should apply to the surround channel(s) when downmixing to stereo in Lt/Rt mode. 0.841 Apply -1.5dB gain 0.707 Apply -3.0dB gain 0.595 Apply -4.5dB gain 0.500 Apply -6.0dB gain (default) 0.000 Silence Surround Channel(s) \-loro\_cmixlev level Lo/Ro Center Mix Level. The amount of gain the decoder should apply to the center channel when downmixing to stereo in Lo/Ro mode. 1.414 Apply +3dB gain 1.189 Apply +1.5dB gain 1.000 Apply 0dB gain 0.841 Apply -1.5dB gain 0.707 Apply -3.0dB gain 0.595 Apply -4.5dB gain (default) 0.500 Apply -6.0dB gain 0.000 Silence Center Channel \-loro\_surmixlev level Lo/Ro Surround Mix Level. The amount of gain the decoder should apply to the surround channel(s) when downmixing to stereo in Lo/Ro mode. 0.841 Apply -1.5dB gain 0.707 Apply -3.0dB gain 0.595 Apply -4.5dB gain 0.500 Apply -6.0dB gain (default) 0.000 Silence Surround Channel(s) #### 15.2.2.2 Extended Bitstream Information - Part 2 \-dsurex\_mode mode Dolby Surround EX Mode. Indicates whether the stream uses Dolby Surround EX (7.1 matrixed to 5.1). Using this option does **NOT** mean the encoder will actually apply Dolby Surround EX processing. 0 notindicated Not Indicated (default) 1 on Dolby Surround EX Off 2 off Dolby Surround EX On \-dheadphone\_mode mode Dolby Headphone Mode. Indicates whether the stream uses Dolby Headphone encoding (multi-channel matrixed to 2.0 for use with headphones). Using this option does **NOT** mean the encoder will actually apply Dolby Headphone processing. 0 notindicated Not Indicated (default) 1 on Dolby Headphone Off 2 off Dolby Headphone On \-ad\_conv\_type type A/D Converter Type. Indicates whether the audio has passed through HDCD A/D conversion. 0 standard Standard A/D Converter (default) 1 hdcd HDCD A/D Converter #### 15.2.3 Other AC-3 Encoding Options \-stereo\_rematrixing boolean Stereo Rematrixing. Enables/Disables use of rematrixing for stereo input. This is an optional AC-3 feature that increases quality by selectively encoding the left/right channels as mid/side. This option is enabled by default, and it is highly recommended that it be left as enabled except for testing purposes. cutoff frequency Set lowpass cutoff frequency. If unspecified, the encoder selects a default determined by various other encoding parameters. #### 15.2.4 Floating-Point-Only AC-3 Encoding Options These options are only valid for the floating-point encoder and do not exist for the fixed-point encoder due to the corresponding features not being implemented in fixed-point. \-channel\_coupling boolean Enables/Disables use of channel coupling, which is an optional AC-3 feature that increases quality by combining high frequency information from multiple channels into a single channel. The per-channel high frequency information is sent with less accuracy in both the frequency and time domains. This allows more bits to be used for lower frequencies while preserving enough information to reconstruct the high frequencies. This option is enabled by default for the floating-point encoder and should generally be left as enabled except for testing purposes or to increase encoding speed. \-1 auto Selected by Encoder (default) 0 off Disable Channel Coupling 1 on Enable Channel Coupling \-cpl\_start\_band number Coupling Start Band. Sets the channel coupling start band, from 1 to 15. If a value higher than the bandwidth is used, it will be reduced to 1 less than the coupling end band. If auto is used, the start band will be determined by the encoder based on the bit rate, sample rate, and channel layout. This option has no effect if channel coupling is disabled. \-1 auto Selected by Encoder (default) ### 15.3 flac FLAC (Free Lossless Audio Codec) Encoder #### 15.3.1 Options The following options are supported by FFmpeg’s flac encoder. compression\_level Sets the compression level, which chooses defaults for many other options if they are not set explicitly. Valid values are from 0 to 12, 5 is the default. frame\_size Sets the size of the frames in samples per channel. lpc\_coeff\_precision Sets the LPC coefficient precision, valid values are from 1 to 15, 15 is the default. lpc\_type Sets the first stage LPC algorithm ‘none’ LPC is not used ‘fixed’ fixed LPC coefficients ‘levinson’ ‘cholesky’ lpc\_passes Number of passes to use for Cholesky factorization during LPC analysis min\_partition\_order The minimum partition order max\_partition\_order The maximum partition order prediction\_order\_method ‘estimation’ ‘2level’ ‘4level’ ‘8level’ ‘search’ Bruteforce search ‘log’ ch\_mode Channel mode ‘auto’ The mode is chosen automatically for each frame ‘indep’ Channels are independently coded ‘left\_side’ ‘right\_side’ ‘mid\_side’ exact\_rice\_parameters Chooses if rice parameters are calculated exactly or approximately. if set to 1 then they are chosen exactly, which slows the code down slightly and improves compression slightly. multi\_dim\_quant Multi Dimensional Quantization. If set to 1 then a 2nd stage LPC algorithm is applied after the first stage to finetune the coefficients. This is quite slow and slightly improves compression. ### 15.4 opus Opus encoder. This is a native FFmpeg encoder for the Opus format. Currently, it’s in development and only implements the CELT part of the codec. Its quality is usually worse and at best is equal to the libopus encoder. #### 15.4.1 Options b Set bit rate in bits/s. If unspecified it uses the number of channels and the layout to make a good guess. opus\_delay Sets the maximum delay in milliseconds. Lower delays than 20ms will very quickly decrease quality. ### 15.5 libfdk\_aac libfdk-aac AAC (Advanced Audio Coding) encoder wrapper. The libfdk-aac library is based on the Fraunhofer FDK AAC code from the Android project. Requires the presence of the libfdk-aac headers and library during configuration. You need to explicitly configure the build with `--enable-libfdk-aac`. The library is also incompatible with GPL, so if you allow the use of GPL, you should configure with `--enable-gpl --enable-nonfree --enable-libfdk-aac`. This encoder has support for the AAC-HE profiles. VBR encoding, enabled through the vbr or flags +qscale options, is experimental and only works with some combinations of parameters. Support for encoding 7.1 audio is only available with libfdk-aac 0.1.3 or higher. For more information see the fdk-aac project at http://sourceforge.net/p/opencore-amr/fdk-aac/. #### 15.5.1 Options The following options are mapped on the shared FFmpeg codec options. b Set bit rate in bits/s. If the bitrate is not explicitly specified, it is automatically set to a suitable value depending on the selected profile. In case VBR mode is enabled the option is ignored. ar Set audio sampling rate (in Hz). channels Set the number of audio channels. flags +qscale Enable fixed quality, VBR (Variable Bit Rate) mode. Note that VBR is implicitly enabled when the vbr value is positive. cutoff Set cutoff frequency. If not specified (or explicitly set to 0) it will use a value automatically computed by the library. Default value is 0. profile Set audio profile. The following profiles are recognized: ‘aac\_low’ Low Complexity AAC (LC) ‘aac\_he’ High Efficiency AAC (HE-AAC) ‘aac\_he\_v2’ High Efficiency AAC version 2 (HE-AACv2) ‘aac\_ld’ Low Delay AAC (LD) ‘aac\_eld’ Enhanced Low Delay AAC (ELD) If not specified it is set to ‘aac\_low’. The following are private options of the libfdk\_aac encoder. afterburner Enable afterburner feature if set to 1, disabled if set to 0. This improves the quality but also the required processing power. Default value is 1. eld\_sbr Enable SBR (Spectral Band Replication) for ELD if set to 1, disabled if set to 0. Default value is 0. eld\_v2 Enable ELDv2 (LD-MPS extension for ELD stereo signals) for ELDv2 if set to 1, disabled if set to 0. Note that option is available when fdk-aac version (AACENCODER\_LIB\_VL0.AACENCODER\_LIB\_VL1.AACENCODER\_LIB\_VL2) > (4.0.0). Default value is 0. signaling Set SBR/PS signaling style. It can assume one of the following values: ‘default’ choose signaling implicitly (explicit hierarchical by default, implicit if global header is disabled) ‘implicit’ implicit backwards compatible signaling ‘explicit\_sbr’ explicit SBR, implicit PS signaling ‘explicit\_hierarchical’ explicit hierarchical signaling Default value is ‘default’. latm Output LATM/LOAS encapsulated data if set to 1, disabled if set to 0. Default value is 0. header\_period Set StreamMuxConfig and PCE repetition period (in frames) for sending in-band configuration buffers within LATM/LOAS transport layer. Must be a 16-bits non-negative integer. Default value is 0. vbr Set VBR mode, from 1 to 5. 1 is lowest quality (though still pretty good) and 5 is highest quality. A value of 0 will disable VBR, and CBR (Constant Bit Rate) is enabled. Currently only the ‘aac\_low’ profile supports VBR encoding. VBR modes 1-5 correspond to roughly the following average bit rates: ‘1’ 32 kbps/channel ‘2’ 40 kbps/channel ‘3’ 48-56 kbps/channel ‘4’ 64 kbps/channel ‘5’ about 80-96 kbps/channel Default value is 0. frame\_length Set the audio frame length in samples. Default value is the internal default of the library. Refer to the library’s documentation for information about supported values. #### 15.5.2 Examples * Use `ffmpeg` to convert an audio file to VBR AAC in an M4A (MP4) container: ffmpeg -i input.wav -codec:a libfdk\_aac -vbr 3 output.m4a * Use `ffmpeg` to convert an audio file to CBR 64k kbps AAC, using the High-Efficiency AAC profile: ffmpeg -i input.wav -c:a libfdk\_aac -profile:a aac\_he -b:a 64k output.m4a ### 15.6 liblc3 liblc3 LC3 (Low Complexity Communication Codec) encoder wrapper. Requires the presence of the liblc3 headers and library during configuration. You need to explicitly configure the build with `--enable-liblc3`. This encoder has support for the Bluetooth SIG LC3 codec for the LE Audio protocol, and the following features of LC3plus: * Frame duration of 2.5 and 5ms. * High-Resolution mode, 48 KHz, and 96 kHz sampling rates. For more information see the liblc3 project at https://github.com/google/liblc3. #### 15.6.1 Options The following options are mapped on the shared FFmpeg codec options. b bitrate Set the bit rate in bits/s. This will determine the fixed size of the encoded frames, for a selected frame duration. ar frequency Set the audio sampling rate (in Hz). channels Set the number of audio channels. frame\_duration Set the audio frame duration in milliseconds. Default value is 10ms. Allowed frame durations are 2.5ms, 5ms, 7.5ms and 10ms. LC3 (Bluetooth LE Audio), allows 7.5ms and 10ms; and LC3plus 2.5ms, 5ms and 10ms. The 10ms frame duration is available in LC3 and LC3 plus standard. In this mode, the produced bitstream can be referenced either as LC3 or LC3plus. high\_resolution boolean Enable the high-resolution mode if set to 1. The high-resolution mode is available with all LC3plus frame durations and for a sampling rate of 48 KHz, and 96 KHz. The encoder automatically turns off this mode at lower sampling rates and activates it at 96 KHz. This mode should be preferred at high bitrates. In this mode, the audio bandwidth is always up to the Nyquist frequency, compared to LC3 at 48 KHz, which limits the bandwidth to 20 KHz. ### 15.7 libmp3lame LAME (Lame Ain’t an MP3 Encoder) MP3 encoder wrapper. Requires the presence of the libmp3lame headers and library during configuration. You need to explicitly configure the build with `--enable-libmp3lame`. See libshine for a fixed-point MP3 encoder, although with a lower quality. #### 15.7.1 Options The following options are supported by the libmp3lame wrapper. The `lame`\-equivalent of the options are listed in parentheses. b (_\-b_) Set bitrate expressed in bits/s for CBR or ABR. LAME `bitrate` is expressed in kilobits/s. q (_\-V_) Set constant quality setting for VBR. This option is valid only using the `ffmpeg` command-line tool. For library interface users, use global\_quality. compression\_level (_\-q_) Set algorithm quality. Valid arguments are integers in the 0-9 range, with 0 meaning highest quality but slowest, and 9 meaning fastest while producing the worst quality. cutoff (_\--lowpass_) Set lowpass cutoff frequency. If unspecified, the encoder dynamically adjusts the cutoff. reservoir Enable use of bit reservoir when set to 1. Default value is 1. LAME has this enabled by default, but can be overridden by use \--nores option. joint\_stereo (_\-m j_) Enable the encoder to use (on a frame by frame basis) either L/R stereo or mid/side stereo. Default value is 1. abr (_\--abr_) Enable the encoder to use ABR when set to 1. The `lame` \--abr sets the target bitrate, while this options only tells FFmpeg to use ABR still relies on b to set bitrate. copyright (_\-c_) Set MPEG audio copyright flag when set to 1. The default value is 0 (disabled). original (_\-o_) Set MPEG audio original flag when set to 1. The default value is 1 (enabled). ### 15.8 libopencore-amrnb OpenCORE Adaptive Multi-Rate Narrowband encoder. Requires the presence of the libopencore-amrnb headers and library during configuration. You need to explicitly configure the build with `--enable-libopencore-amrnb --enable-version3`. This is a mono-only encoder. Officially it only supports 8000Hz sample rate, but you can override it by setting strict to ‘unofficial’ or lower. #### 15.8.1 Options b Set bitrate in bits per second. Only the following bitrates are supported, otherwise libavcodec will round to the nearest valid bitrate. 4750 5150 5900 6700 7400 7950 10200 12200 dtx Allow discontinuous transmission (generate comfort noise) when set to 1. The default value is 0 (disabled). ### 15.9 libopus libopus Opus Interactive Audio Codec encoder wrapper. Requires the presence of the libopus headers and library during configuration. You need to explicitly configure the build with `--enable-libopus`. #### 15.9.1 Option Mapping Most libopus options are modelled after the `opusenc` utility from opus-tools. The following is an option mapping chart describing options supported by the libopus wrapper, and their `opusenc`\-equivalent in parentheses. b (_bitrate_) Set the bit rate in bits/s. FFmpeg’s b option is expressed in bits/s, while `opusenc`’s bitrate in kilobits/s. vbr (_vbr_, _hard-cbr_, and _cvbr_) Set VBR mode. The FFmpeg vbr option has the following valid arguments, with the `opusenc` equivalent options in parentheses: ‘off (_hard-cbr_)’ Use constant bit rate encoding. ‘on (_vbr_)’ Use variable bit rate encoding (the default). ‘constrained (_cvbr_)’ Use constrained variable bit rate encoding. compression\_level (_comp_) Set encoding algorithm complexity. Valid options are integers in the 0-10 range. 0 gives the fastest encodes but lower quality, while 10 gives the highest quality but slowest encoding. The default is 10. frame\_duration (_framesize_) Set maximum frame size, or duration of a frame in milliseconds. The argument must be exactly the following: 2.5, 5, 10, 20, 40, 60. Smaller frame sizes achieve lower latency but less quality at a given bitrate. Sizes greater than 20ms are only interesting at fairly low bitrates. The default is 20ms. packet\_loss (_expect-loss_) Set expected packet loss percentage. The default is 0. fec (_n/a_) Enable inband forward error correction. packet\_loss must be non-zero to take advantage - frequency of FEC ’side-data’ is proportional to expected packet loss. Default is disabled. application (N.A.) Set intended application type. Valid options are listed below: ‘voip’ Favor improved speech intelligibility. ‘audio’ Favor faithfulness to the input (the default). ‘lowdelay’ Restrict to only the lowest delay modes by disabling voice-optimized modes. cutoff (N.A.) Set cutoff bandwidth in Hz. The argument must be exactly one of the following: 4000, 6000, 8000, 12000, or 20000, corresponding to narrowband, mediumband, wideband, super wideband, and fullband respectively. The default is 0 (cutoff disabled). Note that libopus forces a wideband cutoff for bitrates < 15 kbps, unless CELT-only (application set to ‘lowdelay’) mode is used. mapping\_family (_mapping\_family_) Set channel mapping family to be used by the encoder. The default value of -1 uses mapping family 0 for mono and stereo inputs, and mapping family 1 otherwise. The default also disables the surround masking and LFE bandwidth optimzations in libopus, and requires that the input contains 8 channels or fewer. Other values include 0 for mono and stereo, 1 for surround sound with masking and LFE bandwidth optimizations, and 255 for independent streams with an unspecified channel layout. apply\_phase\_inv (N.A.) (requires libopus >= 1.2) If set to 0, disables the use of phase inversion for intensity stereo, improving the quality of mono downmixes, but slightly reducing normal stereo quality. The default is 1 (phase inversion enabled). ### 15.10 libshine Shine Fixed-Point MP3 encoder wrapper. Shine is a fixed-point MP3 encoder. It has a far better performance on platforms without an FPU, e.g. armel CPUs, and some phones and tablets. However, as it is more targeted on performance than quality, it is not on par with LAME and other production-grade encoders quality-wise. Also, according to the project’s homepage, this encoder may not be free of bugs as the code was written a long time ago and the project was dead for at least 5 years. This encoder only supports stereo and mono input. This is also CBR-only. The original project (last updated in early 2007) is at http://sourceforge.net/projects/libshine-fxp/. We only support the updated fork by the Savonet/Liquidsoap project at https://github.com/savonet/shine. Requires the presence of the libshine headers and library during configuration. You need to explicitly configure the build with `--enable-libshine`. See also libmp3lame. #### 15.10.1 Options The following options are supported by the libshine wrapper. The `shineenc`\-equivalent of the options are listed in parentheses. b (_\-b_) Set bitrate expressed in bits/s for CBR. `shineenc` \-b option is expressed in kilobits/s. ### 15.11 libtwolame TwoLAME MP2 encoder wrapper. Requires the presence of the libtwolame headers and library during configuration. You need to explicitly configure the build with `--enable-libtwolame`. #### 15.11.1 Options The following options are supported by the libtwolame wrapper. The `twolame`\-equivalent options follow the FFmpeg ones and are in parentheses. b (_\-b_) Set bitrate expressed in bits/s for CBR. `twolame` b option is expressed in kilobits/s. Default value is 128k. q (_\-V_) Set quality for experimental VBR support. Maximum value range is from -50 to 50, useful range is from -10 to 10. The higher the value, the better the quality. This option is valid only using the `ffmpeg` command-line tool. For library interface users, use global\_quality. mode (_\--mode_) Set the mode of the resulting audio. Possible values: ‘auto’ Choose mode automatically based on the input. This is the default. ‘stereo’ Stereo ‘joint\_stereo’ Joint stereo ‘dual\_channel’ Dual channel ‘mono’ Mono psymodel (_\--psyc-mode_) Set psychoacoustic model to use in encoding. The argument must be an integer between -1 and 4, inclusive. The higher the value, the better the quality. The default value is 3. energy\_levels (_\--energy_) Enable energy levels extensions when set to 1. The default value is 0 (disabled). error\_protection (_\--protect_) Enable CRC error protection when set to 1. The default value is 0 (disabled). copyright (_\--copyright_) Set MPEG audio copyright flag when set to 1. The default value is 0 (disabled). original (_\--original_) Set MPEG audio original flag when set to 1. The default value is 0 (disabled). ### 15.12 libvo-amrwbenc VisualOn Adaptive Multi-Rate Wideband encoder. Requires the presence of the libvo-amrwbenc headers and library during configuration. You need to explicitly configure the build with `--enable-libvo-amrwbenc --enable-version3`. This is a mono-only encoder. Officially it only supports 16000Hz sample rate, but you can override it by setting strict to ‘unofficial’ or lower. #### 15.12.1 Options b Set bitrate in bits/s. Only the following bitrates are supported, otherwise libavcodec will round to the nearest valid bitrate. ‘6600’ ‘8850’ ‘12650’ ‘14250’ ‘15850’ ‘18250’ ‘19850’ ‘23050’ ‘23850’ dtx Allow discontinuous transmission (generate comfort noise) when set to 1. The default value is 0 (disabled). ### 15.13 libvorbis libvorbis encoder wrapper. Requires the presence of the libvorbisenc headers and library during configuration. You need to explicitly configure the build with `--enable-libvorbis`. #### 15.13.1 Options The following options are supported by the libvorbis wrapper. The `oggenc`\-equivalent of the options are listed in parentheses. To get a more accurate and extensive documentation of the libvorbis options, consult the libvorbisenc’s and `oggenc`’s documentations. See http://xiph.org/vorbis/, http://wiki.xiph.org/Vorbis-tools, and oggenc(1). b (_\-b_) Set bitrate expressed in bits/s for ABR. `oggenc` \-b is expressed in kilobits/s. q (_\-q_) Set constant quality setting for VBR. The value should be a float number in the range of -1.0 to 10.0. The higher the value, the better the quality. The default value is ‘3.0’. This option is valid only using the `ffmpeg` command-line tool. For library interface users, use global\_quality. cutoff (_\--advanced-encode-option lowpass\_frequency=N_) Set cutoff bandwidth in Hz, a value of 0 disables cutoff. `oggenc`’s related option is expressed in kHz. The default value is ‘0’ (cutoff disabled). minrate (_\-m_) Set minimum bitrate expressed in bits/s. `oggenc` \-m is expressed in kilobits/s. maxrate (_\-M_) Set maximum bitrate expressed in bits/s. `oggenc` \-M is expressed in kilobits/s. This only has effect on ABR mode. iblock (_\--advanced-encode-option impulse\_noisetune=N_) Set noise floor bias for impulse blocks. The value is a float number from -15.0 to 0.0. A negative bias instructs the encoder to pay special attention to the crispness of transients in the encoded audio. The tradeoff for better transient response is a higher bitrate. ### 15.14 mjpeg Motion JPEG encoder. #### 15.14.1 Options huffman Set the huffman encoding strategy. Possible values: ‘default’ Use the default huffman tables. This is the default strategy. ‘optimal’ Compute and use optimal huffman tables. ### 15.15 wavpack WavPack lossless audio encoder. #### 15.15.1 Options The equivalent options for `wavpack` command line utility are listed in parentheses. #### 15.15.1.1 Shared options The following shared options are effective for this encoder. Only special notes about this particular encoder will be documented here. For the general meaning of the options, see the Codec Options chapter. frame\_size (_\--blocksize_) For this encoder, the range for this option is between 128 and 131072. Default is automatically decided based on sample rate and number of channel. For the complete formula of calculating default, see libavcodec/wavpackenc.c. compression\_level (_\-f_, _\-h_, _\-hh_, and _\-x_) #### 15.15.1.2 Private options joint\_stereo (_\-j_) Set whether to enable joint stereo. Valid values are: ‘on (_1_)’ Force mid/side audio encoding. ‘off (_0_)’ Force left/right audio encoding. ‘auto’ Let the encoder decide automatically. optimize\_mono Set whether to enable optimization for mono. This option is only effective for non-mono streams. Available values: ‘on’ enabled ‘off’ disabled ## 16 Video Encoders A description of some of the currently available video encoders follows. ### 16.1 a64\_multi, a64\_multi5 A64 / Commodore 64 multicolor charset encoder. `a64_multi5` is extended with 5th color (colram). ### 16.2 Cinepak Cinepak aka CVID encoder. Compatible with Windows 3.1 and vintage MacOS. #### 16.2.1 Options g integer Keyframe interval. A keyframe is inserted at least every `-g` frames, sometimes sooner. q:v integer Quality factor. Lower is better. Higher gives lower bitrate. The following table lists bitrates when encoding akiyo\_cif.y4m for various values of `-q:v` with `-g 100`: `-q:v 1` 1918 kb/s `-q:v 2` 1735 kb/s `-q:v 4` 1500 kb/s `-q:v 10` 1041 kb/s `-q:v 20` 826 kb/s `-q:v 40` 553 kb/s `-q:v 100` 394 kb/s `-q:v 200` 312 kb/s `-q:v 400` 266 kb/s `-q:v 1000` 237 kb/s max\_extra\_cb\_iterations integer Max extra codebook recalculation passes, more is better and slower. skip\_empty\_cb boolean Avoid wasting bytes, ignore vintage MacOS decoder. max\_strips integer min\_strips integer The minimum and maximum number of strips to use. Wider range sometimes improves quality. More strips is generally better quality but costs more bits. Fewer strips tend to yield more keyframes. Vintage compatible is 1..3. strip\_number\_adaptivity integer How much number of strips is allowed to change between frames. Higher is better but slower. ### 16.3 ffv1 FFv1 Encoder #### 16.3.1 Options The following options are supported by FFmpeg’s FFv1 encoder. context Sets the context size, 0 (default) is small, 1 is big. coder Set the coder, ‘rice’ Golomb rice coder ‘range\_def’ Range coder with default table ‘range\_tab’ Range coder with custom table slicecrc \-1 (default, automatic), 1 use crc with zero initial and final state, 2 use crc with non zero initial and final state qtable ‘default’ default, automatic ‘8bit’ use 8bit default ‘greater8bit’ use >8bit default remap\_optimizer 0 - 5, default 3, how much effort the encoder puts into optimizing the remap table. ### 16.4 GIF GIF image/animation encoder. #### 16.4.1 Options gifflags integer Sets the flags used for GIF encoding. offsetting Enables picture offsetting. Default is enabled. transdiff Enables transparency detection between frames. Default is enabled. gifimage integer Enables encoding one full GIF image per frame, rather than an animated GIF. Default value is 0. global\_palette integer Writes a palette to the global GIF header where feasible. If disabled, every frame will always have a palette written, even if there is a global palette supplied. Default value is 1. ### 16.5 Hap Vidvox Hap video encoder. #### 16.5.1 Options format integer Specifies the Hap format to encode. hap hap\_alpha hap\_q Default value is hap. chunks integer Specifies the number of chunks to split frames into, between 1 and 64. This permits multithreaded decoding of large frames, potentially at the cost of data-rate. The encoder may modify this value to divide frames evenly. Default value is 1. compressor integer Specifies the second-stage compressor to use. If set to none, chunks will be limited to 1, as chunked uncompressed frames offer no benefit. none snappy Default value is snappy. ### 16.6 jpeg2000 The native jpeg 2000 encoder is lossy by default, the `-q:v` option can be used to set the encoding quality. Lossless encoding can be selected with `-pred 1`. #### 16.6.1 Options format integer Can be set to either `j2k` or `jp2` (the default) that makes it possible to store non-rgb pix\_fmts. tile\_width integer Sets tile width. Range is 1 to 1073741824. Default is 256. tile\_height integer Sets tile height. Range is 1 to 1073741824. Default is 256. pred integer Allows setting the discrete wavelet transform (DWT) type dwt97int (Lossy) dwt53 (Lossless) Default is `dwt97int` sop boolean Enable this to add SOP marker at the start of each packet. Disabled by default. eph boolean Enable this to add EPH marker at the end of each packet header. Disabled by default. prog integer Sets the progression order to be used by the encoder. Possible values are: lrcp rlcp rpcl pcrl cprl Set to `lrcp` by default. layer\_rates string By default, when this option is not used, compression is done using the quality metric. This option allows for compression using compression ratio. The compression ratio for each level could be specified. The compression ratio of a layer `l` species the what ratio of total file size is contained in the first `l` layers. Example usage: ffmpeg -i input.bmp -c:v jpeg2000 -layer\_rates "100,10,1" output.j2k This would compress the image to contain 3 layers, where the data contained in the first layer would be compressed by 1000 times, compressed by 100 in the first two layers, and shall contain all data while using all 3 layers. ### 16.7 librav1e rav1e AV1 encoder wrapper. Requires the presence of the rav1e headers and library during configuration. You need to explicitly configure the build with `--enable-librav1e`. #### 16.7.1 Options qmax Sets the maximum quantizer to use when using bitrate mode. qmin Sets the minimum quantizer to use when using bitrate mode. qp Uses quantizer mode to encode at the given quantizer (0-255). speed Selects the speed preset (0-10) to encode with. tiles Selects how many tiles to encode with. tile-rows Selects how many rows of tiles to encode with. tile-columns Selects how many columns of tiles to encode with. rav1e-params Set rav1e options using a list of key\=value pairs separated by ":". See `rav1e --help` for a list of options. For example to specify librav1e encoding options with \-rav1e-params: ffmpeg -i input -c:v librav1e -b:v 500K -rav1e-params speed=5:low\_latency=true output.mp4 ### 16.8 libaom-av1 libaom AV1 encoder wrapper. Requires the presence of the libaom headers and library during configuration. You need to explicitly configure the build with `--enable-libaom`. #### 16.8.1 Options The wrapper supports the following standard libavcodec options: b Set bitrate target in bits/second. By default this will use variable-bitrate mode. If maxrate and minrate are also set to the same value then it will use constant-bitrate mode, otherwise if crf is set as well then it will use constrained-quality mode. g keyint\_min Set key frame placement. The GOP size sets the maximum distance between key frames; if zero the output stream will be intra-only. The minimum distance is ignored unless it is the same as the GOP size, in which case key frames will always appear at a fixed interval. Not set by default, so without this option the library has completely free choice about where to place key frames. qmin qmax Set minimum/maximum quantisation values. Valid range is from 0 to 63 (warning: this does not match the quantiser values actually used by AV1 - divide by four to map real quantiser values to this range). Defaults to min/max (no constraint). minrate maxrate bufsize rc\_init\_occupancy Set rate control buffering parameters. Not used if not set - defaults to unconstrained variable bitrate. threads Set the number of threads to use while encoding. This may require the tiles or row-mt options to also be set to actually use the specified number of threads fully. Defaults to the number of hardware threads supported by the host machine. profile Set the encoding profile. Defaults to using the profile which matches the bit depth and chroma subsampling of the input. The wrapper also has some specific options: cpu-used Set the quality/encoding speed tradeoff. Valid range is from 0 to 8, higher numbers indicating greater speed and lower quality. The default value is 1, which will be slow and high quality. auto-alt-ref Enable use of alternate reference frames. Defaults to the internal default of the library. arnr-max-frames (_frames_) Set altref noise reduction max frame count. Default is -1. arnr-strength (_strength_) Set altref noise reduction filter strength. Range is -1 to 6. Default is -1. aq-mode (_aq-mode_) Set adaptive quantization mode. Possible values: ‘none (_0_)’ Disabled. ‘variance (_1_)’ Variance-based. ‘complexity (_2_)’ Complexity-based. ‘cyclic (_3_)’ Cyclic refresh. tune (_tune_) Set the distortion metric the encoder is tuned with. Default is `psnr`. ‘psnr (_0_)’ ‘ssim (_1_)’ lag-in-frames Set the maximum number of frames which the encoder may keep in flight at any one time for lookahead purposes. Defaults to the internal default of the library. error-resilience Enable error resilience features: default Improve resilience against losses of whole frames. Not enabled by default. crf Set the quality/size tradeoff for constant-quality (no bitrate target) and constrained-quality (with maximum bitrate target) modes. Valid range is 0 to 63, higher numbers indicating lower quality and smaller output size. Only used if set; by default only the bitrate target is used. static-thresh Set a change threshold on blocks below which they will be skipped by the encoder. Defined in arbitrary units as a nonnegative integer, defaulting to zero (no blocks are skipped). drop-threshold Set a threshold for dropping frames when close to rate control bounds. Defined as a percentage of the target buffer - when the rate control buffer falls below this percentage, frames will be dropped until it has refilled above the threshold. Defaults to zero (no frames are dropped). denoise-noise-level (_level_) Amount of noise to be removed for grain synthesis. Grain synthesis is disabled if this option is not set or set to 0. denoise-block-size (_pixels_) Block size used for denoising for grain synthesis. If not set, AV1 codec uses the default value of 32. undershoot-pct (_pct_) Set datarate undershoot (min) percentage of the target bitrate. Range is -1 to 100. Default is -1. overshoot-pct (_pct_) Set datarate overshoot (max) percentage of the target bitrate. Range is -1 to 1000. Default is -1. minsection-pct (_pct_) Minimum percentage variation of the GOP bitrate from the target bitrate. If minsection-pct is not set, the libaomenc wrapper computes it as follows: `(minrate * 100 / bitrate)`. Range is -1 to 100. Default is -1 (unset). maxsection-pct (_pct_) Maximum percentage variation of the GOP bitrate from the target bitrate. If maxsection-pct is not set, the libaomenc wrapper computes it as follows: `(maxrate * 100 / bitrate)`. Range is -1 to 5000. Default is -1 (unset). frame-parallel (_boolean_) Enable frame parallel decodability features. Default is true. tiles Set the number of tiles to encode the input video with, as columns x rows. Larger numbers allow greater parallelism in both encoding and decoding, but may decrease coding efficiency. Defaults to the minimum number of tiles required by the size of the input video (this is 1x1 (that is, a single tile) for sizes up to and including 4K). tile-columns tile-rows Set the number of tiles as log2 of the number of tile rows and columns. Provided for compatibility with libvpx/VP9. row-mt (Requires libaom >= 1.0.0-759-g90a15f4f2) Enable row based multi-threading. Disabled by default. enable-cdef (_boolean_) Enable Constrained Directional Enhancement Filter. The libaom-av1 encoder enables CDEF by default. enable-restoration (_boolean_) Enable Loop Restoration Filter. Default is true for libaom-av1. enable-global-motion (_boolean_) Enable the use of global motion for block prediction. Default is true. enable-intrabc (_boolean_) Enable block copy mode for intra block prediction. This mode is useful for screen content. Default is true. enable-rect-partitions (_boolean_) (Requires libaom >= v2.0.0) Enable rectangular partitions. Default is true. enable-1to4-partitions (_boolean_) (Requires libaom >= v2.0.0) Enable 1:4/4:1 partitions. Default is true. enable-ab-partitions (_boolean_) (Requires libaom >= v2.0.0) Enable AB shape partitions. Default is true. enable-angle-delta (_boolean_) (Requires libaom >= v2.0.0) Enable angle delta intra prediction. Default is true. enable-cfl-intra (_boolean_) (Requires libaom >= v2.0.0) Enable chroma predicted from luma intra prediction. Default is true. enable-filter-intra (_boolean_) (Requires libaom >= v2.0.0) Enable filter intra predictor. Default is true. enable-intra-edge-filter (_boolean_) (Requires libaom >= v2.0.0) Enable intra edge filter. Default is true. enable-smooth-intra (_boolean_) (Requires libaom >= v2.0.0) Enable smooth intra prediction mode. Default is true. enable-paeth-intra (_boolean_) (Requires libaom >= v2.0.0) Enable paeth predictor in intra prediction. Default is true. enable-palette (_boolean_) (Requires libaom >= v2.0.0) Enable palette prediction mode. Default is true. enable-flip-idtx (_boolean_) (Requires libaom >= v2.0.0) Enable extended transform type, including FLIPADST\_DCT, DCT\_FLIPADST, FLIPADST\_FLIPADST, ADST\_FLIPADST, FLIPADST\_ADST, IDTX, V\_DCT, H\_DCT, V\_ADST, H\_ADST, V\_FLIPADST, H\_FLIPADST. Default is true. enable-tx64 (_boolean_) (Requires libaom >= v2.0.0) Enable 64-pt transform. Default is true. reduced-tx-type-set (_boolean_) (Requires libaom >= v2.0.0) Use reduced set of transform types. Default is false. use-intra-dct-only (_boolean_) (Requires libaom >= v2.0.0) Use DCT only for INTRA modes. Default is false. use-inter-dct-only (_boolean_) (Requires libaom >= v2.0.0) Use DCT only for INTER modes. Default is false. use-intra-default-tx-only (_boolean_) (Requires libaom >= v2.0.0) Use Default-transform only for INTRA modes. Default is false. enable-ref-frame-mvs (_boolean_) (Requires libaom >= v2.0.0) Enable temporal mv prediction. Default is true. enable-reduced-reference-set (_boolean_) (Requires libaom >= v2.0.0) Use reduced set of single and compound references. Default is false. enable-obmc (_boolean_) (Requires libaom >= v2.0.0) Enable obmc. Default is true. enable-dual-filter (_boolean_) (Requires libaom >= v2.0.0) Enable dual filter. Default is true. enable-diff-wtd-comp (_boolean_) (Requires libaom >= v2.0.0) Enable difference-weighted compound. Default is true. enable-dist-wtd-comp (_boolean_) (Requires libaom >= v2.0.0) Enable distance-weighted compound. Default is true. enable-onesided-comp (_boolean_) (Requires libaom >= v2.0.0) Enable one sided compound. Default is true. enable-interinter-wedge (_boolean_) (Requires libaom >= v2.0.0) Enable interinter wedge compound. Default is true. enable-interintra-wedge (_boolean_) (Requires libaom >= v2.0.0) Enable interintra wedge compound. Default is true. enable-masked-comp (_boolean_) (Requires libaom >= v2.0.0) Enable masked compound. Default is true. enable-interintra-comp (_boolean_) (Requires libaom >= v2.0.0) Enable interintra compound. Default is true. enable-smooth-interintra (_boolean_) (Requires libaom >= v2.0.0) Enable smooth interintra mode. Default is true. aom-params Set libaom options using a list of key\=value pairs separated by ":". For a list of supported options, see `aomenc --help` under the section "AV1 Specific Options". For example to specify libaom encoding options with \-aom-params: ffmpeg -i input -c:v libaom-av1 -b:v 500K -aom-params tune=psnr:enable-tpl-model=1 output.mp4 ### 16.9 libsvtav1 SVT-AV1 encoder wrapper. Requires the presence of the SVT-AV1 headers and library during configuration. You need to explicitly configure the build with `--enable-libsvtav1`. #### 16.9.1 Options profile Set the encoding profile. ‘main’ ‘high’ ‘professional’ level Set the operating point level. For example: ’4.0’ hielevel Set the Hierarchical prediction levels. ‘3level’ ‘4level’ This is the default. tier Set the operating point tier. ‘main’ This is the default. ‘high’ qmax Set the maximum quantizer to use when using a bitrate mode. qmin Set the minimum quantizer to use when using a bitrate mode. crf Constant rate factor value used in crf rate control mode (0-63). qp Set the quantizer used in cqp rate control mode (0-63). sc\_detection Enable scene change detection. la\_depth Set number of frames to look ahead (0-120). preset Set the quality-speed tradeoff, in the range 0 to 13. Higher values are faster but lower quality. tile\_rows Set log2 of the number of rows of tiles to use (0-6). tile\_columns Set log2 of the number of columns of tiles to use (0-4). svtav1-params Set SVT-AV1 options using a list of key\=value pairs separated by ":". See the SVT-AV1 encoder user guide for a list of accepted parameters. ### 16.10 libjxl libjxl JPEG XL encoder wrapper. Requires the presence of the libjxl headers and library during configuration. You need to explicitly configure the build with `--enable-libjxl`. #### 16.10.1 Options The libjxl wrapper supports the following options: distance Set the target Butteraugli distance. This is a quality setting: lower distance yields higher quality, with distance=1.0 roughly comparable to libjpeg Quality 90 for photographic content. Setting distance=0.0 yields true lossless encoding. Valid values range between 0.0 and 15.0, and sane values rarely exceed 5.0. Setting distance=0.1 usually attains transparency for most input. The default is 1.0. effort Set the encoding effort used. Higher effort values produce more consistent quality and usually produces a better quality/bpp curve, at the cost of more CPU time required. Valid values range from 1 to 9, and the default is 7. modular Force the encoder to use Modular mode instead of choosing automatically. The default is to use VarDCT for lossy encoding and Modular for lossless. VarDCT is generally superior to Modular for lossy encoding but does not support lossless encoding. ### 16.11 libkvazaar Kvazaar H.265/HEVC encoder. Requires the presence of the libkvazaar headers and library during configuration. You need to explicitly configure the build with \--enable-libkvazaar. #### 16.11.1 Options b Set target video bitrate in bit/s and enable rate control. kvazaar-params Set kvazaar parameters as a list of name\=value pairs separated by commas (,). See kvazaar documentation for a list of options. ### 16.12 libopenh264 Cisco libopenh264 H.264/MPEG-4 AVC encoder wrapper. This encoder requires the presence of the libopenh264 headers and library during configuration. You need to explicitly configure the build with `--enable-libopenh264`. The library is detected using `pkg-config`. For more information about the library see http://www.openh264.org. #### 16.12.1 Options The following FFmpeg global options affect the configurations of the libopenh264 encoder. b Set the bitrate (as a number of bits per second). g Set the GOP size. maxrate Set the max bitrate (as a number of bits per second). flags +global\_header Set global header in the bitstream. slices Set the number of slices, used in parallelized encoding. Default value is 0. This is only used when slice\_mode is set to ‘fixed’. loopfilter Enable loop filter, if set to 1 (automatically enabled). To disable set a value of 0. profile Set profile restrictions. If set to the value of ‘main’ enable CABAC (set the `SEncParamExt.iEntropyCodingModeFlag` flag to 1). max\_nal\_size Set maximum NAL size in bytes. allow\_skip\_frames Allow skipping frames to hit the target bitrate if set to 1. ### 16.13 libtheora libtheora Theora encoder wrapper. Requires the presence of the libtheora headers and library during configuration. You need to explicitly configure the build with `--enable-libtheora`. For more information about the libtheora project see http://www.theora.org/. #### 16.13.1 Options The following global options are mapped to internal libtheora options which affect the quality and the bitrate of the encoded stream. b Set the video bitrate in bit/s for CBR (Constant Bit Rate) mode. In case VBR (Variable Bit Rate) mode is enabled this option is ignored. flags Used to enable constant quality mode (VBR) encoding through the qscale flag, and to enable the `pass1` and `pass2` modes. g Set the GOP size. global\_quality Set the global quality as an integer in lambda units. Only relevant when VBR mode is enabled with `flags +qscale`. The value is converted to QP units by dividing it by `FF_QP2LAMBDA`, clipped in the \[0 - 10\] range, and then multiplied by 6.3 to get a value in the native libtheora range \[0-63\]. A higher value corresponds to a higher quality. q Enable VBR mode when set to a non-negative value, and set constant quality value as a double floating point value in QP units. The value is clipped in the \[0-10\] range, and then multiplied by 6.3 to get a value in the native libtheora range \[0-63\]. This option is valid only using the `ffmpeg` command-line tool. For library interface users, use global\_quality. #### 16.13.2 Examples * Set maximum constant quality (VBR) encoding with `ffmpeg`: ffmpeg -i INPUT -codec:v libtheora -q:v 10 OUTPUT.ogg * Use `ffmpeg` to convert a CBR 1000 kbps Theora video stream: ffmpeg -i INPUT -codec:v libtheora -b:v 1000k OUTPUT.ogg ### 16.14 libvpx VP8/VP9 format supported through libvpx. Requires the presence of the libvpx headers and library during configuration. You need to explicitly configure the build with `--enable-libvpx`. #### 16.14.1 Options The following options are supported by the libvpx wrapper. The `vpxenc`\-equivalent options or values are listed in parentheses for easy migration. To reduce the duplication of documentation, only the private options and some others requiring special attention are documented here. For the documentation of the undocumented generic options, see the Codec Options chapter. To get more documentation of the libvpx options, invoke the command `ffmpeg -h encoder=libvpx`, `ffmpeg -h encoder=libvpx-vp9` or `vpxenc --help`. Further information is available in the libvpx API documentation. b (_target-bitrate_) Set bitrate in bits/s. Note that FFmpeg’s b option is expressed in bits/s, while `vpxenc`’s target-bitrate is in kilobits/s. g (_kf-max-dist_) keyint\_min (_kf-min-dist_) qmin (_min-q_) Minimum (Best Quality) Quantizer. qmax (_max-q_) Maximum (Worst Quality) Quantizer. Can be changed per-frame. bufsize (_buf-sz_, _buf-optimal-sz_) Set ratecontrol buffer size (in bits). Note `vpxenc`’s options are specified in milliseconds, the libvpx wrapper converts this value as follows: `buf-sz = bufsize * 1000 / bitrate`, `buf-optimal-sz = bufsize * 1000 / bitrate * 5 / 6`. rc\_init\_occupancy (_buf-initial-sz_) Set number of bits which should be loaded into the rc buffer before decoding starts. Note `vpxenc`’s option is specified in milliseconds, the libvpx wrapper converts this value as follows: `rc_init_occupancy * 1000 / bitrate`. undershoot-pct Set datarate undershoot (min) percentage of the target bitrate. overshoot-pct Set datarate overshoot (max) percentage of the target bitrate. skip\_threshold (_drop-frame_) qcomp (_bias-pct_) maxrate (_maxsection-pct_) Set GOP max bitrate in bits/s. Note `vpxenc`’s option is specified as a percentage of the target bitrate, the libvpx wrapper converts this value as follows: `(maxrate * 100 / bitrate)`. minrate (_minsection-pct_) Set GOP min bitrate in bits/s. Note `vpxenc`’s option is specified as a percentage of the target bitrate, the libvpx wrapper converts this value as follows: `(minrate * 100 / bitrate)`. minrate, maxrate, b _end-usage=cbr_ `(minrate == maxrate == bitrate)`. crf (_end-usage=cq_, _cq-level_) tune (_tune_) ‘psnr (_psnr_)’ ‘ssim (_ssim_)’ quality, deadline (_deadline_) ‘best’ Use best quality deadline. Poorly named and quite slow, this option should be avoided as it may give worse quality output than good. ‘good’ Use good quality deadline. This is a good trade-off between speed and quality when used with the cpu-used option. ‘realtime’ Use realtime quality deadline. speed, cpu-used (_cpu-used_) Set quality/speed ratio modifier. Higher values speed up the encode at the cost of quality. nr (_noise-sensitivity_) static-thresh Set a change threshold on blocks below which they will be skipped by the encoder. slices (_token-parts_) Note that FFmpeg’s slices option gives the total number of partitions, while `vpxenc`’s token-parts is given as `log2(partitions)`. max-intra-rate Set maximum I-frame bitrate as a percentage of the target bitrate. A value of 0 means unlimited. force\_key\_frames `VPX_EFLAG_FORCE_KF` Alternate reference frame related auto-alt-ref Enable use of alternate reference frames (2-pass only). Values greater than 1 enable multi-layer alternate reference frames (VP9 only). arnr-maxframes Set altref noise reduction max frame count. arnr-type Set altref noise reduction filter type: backward, forward, centered. arnr-strength Set altref noise reduction filter strength. rc-lookahead, lag-in-frames (_lag-in-frames_) Set number of frames to look ahead for frametype and ratecontrol. min-gf-interval Set minimum golden/alternate reference frame interval (VP9 only). error-resilient Enable error resiliency features. sharpness integer Increase sharpness at the expense of lower PSNR. The valid range is \[0, 7\]. ts-parameters Sets the temporal scalability configuration using a :-separated list of key=value pairs. For example, to specify temporal scalability parameters with `ffmpeg`: ffmpeg -i INPUT -c:v libvpx -ts-parameters ts\_number\_layers=3:\\ ts\_target\_bitrate=250,500,1000:ts\_rate\_decimator=4,2,1:\\ ts\_periodicity=4:ts\_layer\_id=0,2,1,2:ts\_layering\_mode=3 OUTPUT Below is a brief explanation of each of the parameters, please refer to `struct vpx_codec_enc_cfg` in `vpx/vpx_encoder.h` for more details. ts\_number\_layers Number of temporal coding layers. ts\_target\_bitrate Target bitrate for each temporal layer (in kbps). (bitrate should be inclusive of the lower temporal layer). ts\_rate\_decimator Frame rate decimation factor for each temporal layer. ts\_periodicity Length of the sequence defining frame temporal layer membership. ts\_layer\_id Template defining the membership of frames to temporal layers. ts\_layering\_mode (optional) Selecting the temporal structure from a set of pre-defined temporal layering modes. Currently supports the following options. 0 No temporal layering flags are provided internally, relies on flags being passed in using `metadata` field in `AVFrame` with following keys. vp8-flags Sets the flags passed into the encoder to indicate the referencing scheme for the current frame. Refer to function `vpx_codec_encode` in `vpx/vpx_encoder.h` for more details. temporal\_id Explicitly sets the temporal id of the current frame to encode. 2 Two temporal layers. 0-1... 3 Three temporal layers. 0-2-1-2...; with single reference frame. 4 Same as option "3", except there is a dependency between the two temporal layer 2 frames within the temporal period. VP8-specific options screen-content-mode Screen content mode, one of: 0 (off), 1 (screen), 2 (screen with more aggressive rate control). VP9-specific options lossless Enable lossless mode. tile-columns Set number of tile columns to use. Note this is given as `log2(tile_columns)`. For example, 8 tile columns would be requested by setting the tile-columns option to 3. tile-rows Set number of tile rows to use. Note this is given as `log2(tile_rows)`. For example, 4 tile rows would be requested by setting the tile-rows option to 2. frame-parallel Enable frame parallel decodability features. aq-mode Set adaptive quantization mode (0: off (default), 1: variance 2: complexity, 3: cyclic refresh, 4: equator360). colorspace _color-space_ Set input color space. The VP9 bitstream supports signaling the following colorspaces: ‘rgb’ _sRGB_ ‘bt709’ _bt709_ ‘unspecified’ _unknown_ ‘bt470bg’ _bt601_ ‘smpte170m’ _smpte170_ ‘smpte240m’ _smpte240_ ‘bt2020\_ncl’ _bt2020_ row-mt boolean Enable row based multi-threading. tune-content Set content type: default (0), screen (1), film (2). corpus-complexity Corpus VBR mode is a variant of standard VBR where the complexity distribution midpoint is passed in rather than calculated for a specific clip or chunk. The valid range is \[0, 10000\]. 0 (default) uses standard VBR. enable-tpl boolean Enable temporal dependency model. ref-frame-config Using per-frame metadata, set members of the structure `vpx_svc_ref_frame_config_t` in `vpx/vp8cx.h` to fine-control referencing schemes and frame buffer management. Use a :-separated list of key=value pairs. For example, av\_dict\_set(&av\_frame->metadata, "ref-frame-config", \\ "rfc\_update\_buffer\_slot=7:rfc\_lst\_fb\_idx=0:rfc\_gld\_fb\_idx=1:rfc\_alt\_fb\_idx=2:rfc\_reference\_last=0:rfc\_reference\_golden=0:rfc\_reference\_alt\_ref=0"); rfc\_update\_buffer\_slot Indicates the buffer slot number to update rfc\_update\_last Indicates whether to update the LAST frame rfc\_update\_golden Indicates whether to update GOLDEN frame rfc\_update\_alt\_ref Indicates whether to update ALT\_REF frame rfc\_lst\_fb\_idx LAST frame buffer index rfc\_gld\_fb\_idx GOLDEN frame buffer index rfc\_alt\_fb\_idx ALT\_REF frame buffer index rfc\_reference\_last Indicates whether to reference LAST frame rfc\_reference\_golden Indicates whether to reference GOLDEN frame rfc\_reference\_alt\_ref Indicates whether to reference ALT\_REF frame rfc\_reference\_duration Indicates frame duration For more information about libvpx see: http://www.webmproject.org/ ### 16.15 libvvenc VVenC H.266/VVC encoder wrapper. This encoder requires the presence of the libvvenc headers and library during configuration. You need to explicitly configure the build with \--enable-libvvenc. The VVenC project website is at https://github.com/fraunhoferhhi/vvenc. #### 16.15.1 Supported Pixel Formats VVenC supports only 10-bit color spaces as input. But the internal (encoded) bit depth can be set to 8-bit or 10-bit at runtime. #### 16.15.2 Options b Sets target video bitrate. g Set the GOP size. Currently support for g=1 (Intra only) or default. preset Set the VVenC preset. levelidc Set level idc. tier Set vvc tier. qp Set constant quantization parameter. subopt boolean Set subjective (perceptually motivated) optimization. Default is 1 (on). bitdepth8 boolean Set 8bit coding mode instead of using 10bit. Default is 0 (off). period set (intra) refresh period in seconds. vvenc-params Set vvenc options using a list of key\=value couples separated by ":". See `vvencapp --fullhelp` or `vvencFFapp --fullhelp` for a list of options. For example, the options might be provided as: intraperiod=64:decodingrefreshtype=idr:poc0idr=1:internalbitdepth=8 For example the encoding options might be provided with \-vvenc-params: ffmpeg -i input -c:v libvvenc -b 1M -vvenc-params intraperiod=64:decodingrefreshtype=idr:poc0idr=1:internalbitdepth=8 output.mp4 ### 16.16 libwebp libwebp WebP Image encoder wrapper libwebp is Google’s official encoder for WebP images. It can encode in either lossy or lossless mode. Lossy images are essentially a wrapper around a VP8 frame. Lossless images are a separate codec developed by Google. #### 16.16.1 Pixel Format Currently, libwebp only supports YUV420 for lossy and RGB for lossless due to limitations of the format and libwebp. Alpha is supported for either mode. Because of API limitations, if RGB is passed in when encoding lossy or YUV is passed in for encoding lossless, the pixel format will automatically be converted using functions from libwebp. This is not ideal and is done only for convenience. #### 16.16.2 Options \-lossless boolean Enables/Disables use of lossless mode. Default is 0. \-compression\_level integer For lossy, this is a quality/speed tradeoff. Higher values give better quality for a given size at the cost of increased encoding time. For lossless, this is a size/speed tradeoff. Higher values give smaller size at the cost of increased encoding time. More specifically, it controls the number of extra algorithms and compression tools used, and varies the combination of these tools. This maps to the method option in libwebp. The valid range is 0 to 6. Default is 4. \-quality float For lossy encoding, this controls image quality. For lossless encoding, this controls the effort and time spent in compression. Range is 0 to 100. Default is 75. \-preset type Configuration preset. This does some automatic settings based on the general type of the image. none Do not use a preset. default Use the encoder default. picture Digital picture, like portrait, inner shot photo Outdoor photograph, with natural lighting drawing Hand or line drawing, with high-contrast details icon Small-sized colorful images text Text-like ### 16.17 libx264, libx264rgb x264 H.264/MPEG-4 AVC encoder wrapper. This encoder requires the presence of the libx264 headers and library during configuration. You need to explicitly configure the build with `--enable-libx264`. libx264 supports an impressive number of features, including 8x8 and 4x4 adaptive spatial transform, adaptive B-frame placement, CAVLC/CABAC entropy coding, interlacing (MBAFF), lossless mode, psy optimizations for detail retention (adaptive quantization, psy-RD, psy-trellis). Many libx264 encoder options are mapped to FFmpeg global codec options, while unique encoder options are provided through private options. Additionally the x264opts and x264-params private options allows one to pass a list of key=value tuples as accepted by the libx264 `x264_param_parse` function. The x264 project website is at http://www.videolan.org/developers/x264.html. The libx264rgb encoder is the same as libx264, except it accepts packed RGB pixel formats as input instead of YUV. #### 16.17.1 Supported Pixel Formats x264 supports 8- to 10-bit color spaces. The exact bit depth is controlled at x264’s configure time. #### 16.17.2 Options The following options are supported by the libx264 wrapper. The `x264`\-equivalent options or values are listed in parentheses for easy migration. To reduce the duplication of documentation, only the private options and some others requiring special attention are documented here. For the documentation of the undocumented generic options, see the Codec Options chapter. To get a more accurate and extensive documentation of the libx264 options, invoke the command `x264 --fullhelp` or consult the libx264 documentation. In the list below, note that the `x264` option name is shown in parentheses after the libavcodec corresponding name, in case there is a direct mapping. b (_bitrate_) Set bitrate in bits/s. Note that FFmpeg’s b option is expressed in bits/s, while `x264`’s bitrate is in kilobits/s. bf (_bframes_) Number of B-frames between I and P-frames g (_keyint_) Maximum GOP size qmin (_qpmin_) Minimum quantizer scale qmax (_qpmax_) Maximum quantizer scale qdiff (_qpstep_) Maximum difference between quantizer scales qblur (_qblur_) Quantizer curve blur qcomp (_qcomp_) Quantizer curve compression factor refs (_ref_) Number of reference frames each P-frame can use. The range is 0-16. level (_level_) Set the `x264_param_t.i_level_idc` value in case the value is positive, it is ignored otherwise. This value can be set using the `AVCodecContext` API (e.g. by setting the `AVCodecContext` value directly), and is specified as an integer mapped on a corresponding level (e.g. the value 31 maps to H.264 level IDC "3.1", as defined in the `x264_levels` table). It is ignored when set to a non positive value. Alternatively it can be set as a private option, overriding the value set in `AVCodecContext`, and in this case must be specified as the level IDC identifier (e.g. "3.1"), as defined by H.264 Annex A. sc\_threshold (_scenecut_) Sets the threshold for the scene change detection. trellis (_trellis_) Performs Trellis quantization to increase efficiency. Enabled by default. nr (_nr_) Noise reduction me\_range (_merange_) Maximum range of the motion search in pixels. me\_method (_me_) Set motion estimation method. Possible values in the decreasing order of speed: ‘dia (_dia_)’ ‘epzs (_dia_)’ Diamond search with radius 1 (fastest). ‘epzs’ is an alias for ‘dia’. ‘hex (_hex_)’ Hexagonal search with radius 2. ‘umh (_umh_)’ Uneven multi-hexagon search. ‘esa (_esa_)’ Exhaustive search. ‘tesa (_tesa_)’ Hadamard exhaustive search (slowest). forced-idr Normally, when forcing a I-frame type, the encoder can select any type of I-frame. This option forces it to choose an IDR-frame. subq (_subme_) Sub-pixel motion estimation method. b\_strategy (_b-adapt_) Adaptive B-frame placement decision algorithm. Use only on first-pass. keyint\_min (_min-keyint_) Minimum GOP size. coder Set entropy encoder. Possible values: ‘ac’ Enable CABAC. ‘vlc’ Enable CAVLC and disable CABAC. It generates the same effect as `x264`’s \--no-cabac option. cmp Set full pixel motion estimation comparison algorithm. Possible values: ‘chroma’ Enable chroma in motion estimation. ‘sad’ Ignore chroma in motion estimation. It generates the same effect as `x264`’s \--no-chroma-me option. threads (_threads_) Number of encoding threads. thread\_type Set multithreading technique. Possible values: ‘slice’ Slice-based multithreading. It generates the same effect as `x264`’s \--sliced-threads option. ‘frame’ Frame-based multithreading. flags Set encoding flags. It can be used to disable closed GOP and enable open GOP by setting it to `-cgop`. The result is similar to the behavior of `x264`’s \--open-gop option. rc\_init\_occupancy (_vbv-init_) Initial VBV buffer occupancy preset (_preset_) Set the encoding preset. tune (_tune_) Set tuning of the encoding params. profile (_profile_) Set profile restrictions. fastfirstpass Enable fast settings when encoding first pass, when set to 1. When set to 0, it has the same effect of `x264`’s \--slow-firstpass option. crf (_crf_) Set the quality for constant quality mode. crf\_max (_crf-max_) In CRF mode, prevents VBV from lowering quality beyond this point. qp (_qp_) Set constant quantization rate control method parameter. aq-mode (_aq-mode_) Set AQ method. Possible values: ‘none (_0_)’ Disabled. ‘variance (_1_)’ Variance AQ (complexity mask). ‘autovariance (_2_)’ Auto-variance AQ (experimental). aq-strength (_aq-strength_) Set AQ strength, reduce blocking and blurring in flat and textured areas. psy Use psychovisual optimizations when set to 1. When set to 0, it has the same effect as `x264`’s \--no-psy option. psy-rd (_psy-rd_) Set strength of psychovisual optimization, in psy-rd:psy-trellis format. rc-lookahead (_rc-lookahead_) Set number of frames to look ahead for frametype and ratecontrol. weightb Enable weighted prediction for B-frames when set to 1. When set to 0, it has the same effect as `x264`’s \--no-weightb option. weightp (_weightp_) Set weighted prediction method for P-frames. Possible values: ‘none (_0_)’ Disabled ‘simple (_1_)’ Enable only weighted refs ‘smart (_2_)’ Enable both weighted refs and duplicates ssim (_ssim_) Enable calculation and printing SSIM stats after the encoding. intra-refresh (_intra-refresh_) Enable the use of Periodic Intra Refresh instead of IDR frames when set to 1. avcintra-class (_class_) Configure the encoder to generate AVC-Intra. Valid values are 50, 100 and 200 bluray-compat (_bluray-compat_) Configure the encoder to be compatible with the bluray standard. It is a shorthand for setting "bluray-compat=1 force-cfr=1". b-bias (_b-bias_) Set the influence on how often B-frames are used. b-pyramid (_b-pyramid_) Set method for keeping of some B-frames as references. Possible values: ‘none (_none_)’ Disabled. ‘strict (_strict_)’ Strictly hierarchical pyramid. ‘normal (_normal_)’ Non-strict (not Blu-ray compatible). mixed-refs Enable the use of one reference per partition, as opposed to one reference per macroblock when set to 1. When set to 0, it has the same effect as `x264`’s \--no-mixed-refs option. 8x8dct Enable adaptive spatial transform (high profile 8x8 transform) when set to 1. When set to 0, it has the same effect as `x264`’s \--no-8x8dct option. fast-pskip Enable early SKIP detection on P-frames when set to 1. When set to 0, it has the same effect as `x264`’s \--no-fast-pskip option. aud (_aud_) Enable use of access unit delimiters when set to 1. mbtree Enable use macroblock tree ratecontrol when set to 1. When set to 0, it has the same effect as `x264`’s \--no-mbtree option. deblock (_deblock_) Set loop filter parameters, in alpha:beta form. cplxblur (_cplxblur_) Set fluctuations reduction in QP (before curve compression). partitions (_partitions_) Set partitions to consider as a comma-separated list of values. Possible values in the list: ‘p8x8’ 8x8 P-frame partition. ‘p4x4’ 4x4 P-frame partition. ‘b8x8’ 4x4 B-frame partition. ‘i8x8’ 8x8 I-frame partition. ‘i4x4’ 4x4 I-frame partition. (Enabling ‘p4x4’ requires ‘p8x8’ to be enabled. Enabling ‘i8x8’ requires adaptive spatial transform (8x8dct option) to be enabled.) ‘none (_none_)’ Do not consider any partitions. ‘all (_all_)’ Consider every partition. direct-pred (_direct_) Set direct MV prediction mode. Possible values: ‘none (_none_)’ Disable MV prediction. ‘spatial (_spatial_)’ Enable spatial predicting. ‘temporal (_temporal_)’ Enable temporal predicting. ‘auto (_auto_)’ Automatically decided. slice-max-size (_slice-max-size_) Set the limit of the size of each slice in bytes. If not specified but RTP payload size (ps) is specified, that is used. stats (_stats_) Set the file name for multi-pass stats. nal-hrd (_nal-hrd_) Set signal HRD information (requires vbv-bufsize to be set). Possible values: ‘none (_none_)’ Disable HRD information signaling. ‘vbr (_vbr_)’ Variable bit rate. ‘cbr (_cbr_)’ Constant bit rate (not allowed in MP4 container). x264opts opts x264-params opts Override the x264 configuration using a :-separated list of key=value options. The argument for both options is a list of key\=value couples separated by ":". With x264opts the value can be omitted, and the value `1` is assumed in that case. For filter and psy-rd options values that use ":" as a separator themselves, use "," instead. They accept it as well since long ago but this is kept undocumented for some reason. For example, the options might be provided as: level=30:bframes=0:weightp=0:cabac=0:ref=1:vbv-maxrate=768:vbv-bufsize=2000:analyse=all:me=umh:no-fast-pskip=1:subq=6:8x8dct=0:trellis=0 For example to specify libx264 encoding options with `ffmpeg`: ffmpeg -i foo.mpg -c:v libx264 -x264opts keyint=123:min-keyint=20 -an out.mkv To get the complete list of the libx264 options, invoke the command `x264 --fullhelp` or consult the libx264 documentation. a53cc boolean Import closed captions (which must be ATSC compatible format) into output. Only the mpeg2 and h264 decoders provide these. Default is 1 (on). udu\_sei boolean Import user data unregistered SEI if available into output. Default is 0 (off). mb\_info boolean Set mb\_info data through AVFrameSideData, only useful when used from the API. Default is 0 (off). Encoding ffpresets for common usages are provided so they can be used with the general presets system (e.g. passing the pre option). ### 16.18 libx265 x265 H.265/HEVC encoder wrapper. This encoder requires the presence of the libx265 headers and library during configuration. You need to explicitly configure the build with \--enable-libx265. #### 16.18.1 Options b Sets target video bitrate. bf g Set the GOP size. keyint\_min Minimum GOP size. refs Number of reference frames each P-frame can use. The range is from 1-16. preset Set the x265 preset. tune Set the x265 tune parameter. profile Set profile restrictions. crf Set the quality for constant quality mode. qp Set constant quantization rate control method parameter. qmin Minimum quantizer scale. qmax Maximum quantizer scale. qdiff Maximum difference between quantizer scales. qblur Quantizer curve blur qcomp Quantizer curve compression factor i\_qfactor b\_qfactor forced-idr Normally, when forcing a I-frame type, the encoder can select any type of I-frame. This option forces it to choose an IDR-frame. udu\_sei boolean Import user data unregistered SEI if available into output. Default is 0 (off). x265-params Set x265 options using a list of key\=value couples separated by ":". See `x265 --help` for a list of options. For example to specify libx265 encoding options with \-x265-params: ffmpeg -i input -c:v libx265 -x265-params crf=26:psy-rd=1 output.mp4 ### 16.19 libxavs2 xavs2 AVS2-P2/IEEE1857.4 encoder wrapper. This encoder requires the presence of the libxavs2 headers and library during configuration. You need to explicitly configure the build with \--enable-libxavs2. The following standard libavcodec options are used: * b / bit\_rate * g / gop\_size * bf / max\_b\_frames The encoder also has its own specific options: #### 16.19.1 Options lcu\_row\_threads Set the number of parallel threads for rows from 1 to 8 (default 5). initial\_qp Set the xavs2 quantization parameter from 1 to 63 (default 34). This is used to set the initial qp for the first frame. qp Set the xavs2 quantization parameter from 1 to 63 (default 34). This is used to set the qp value under constant-QP mode. max\_qp Set the max qp for rate control from 1 to 63 (default 55). min\_qp Set the min qp for rate control from 1 to 63 (default 20). speed\_level Set the Speed level from 0 to 9 (default 0). Higher is better but slower. log\_level Set the log level from -1 to 3 (default 0). -1: none, 0: error, 1: warning, 2: info, 3: debug. xavs2-params Set xavs2 options using a list of key\=value couples separated by ":". For example to specify libxavs2 encoding options with \-xavs2-params: ffmpeg -i input -c:v libxavs2 -xavs2-params RdoqLevel=0 output.avs2 ### 16.20 libxeve eXtra-fast Essential Video Encoder (XEVE) MPEG-5 EVC encoder wrapper. The xeve-equivalent options or values are listed in parentheses for easy migration. This encoder requires the presence of the libxeve headers and library during configuration. You need to explicitly configure the build with \--enable-libxeve. Many libxeve encoder options are mapped to FFmpeg global codec options, while unique encoder options are provided through private options. Additionally the xeve-params private options allows one to pass a list of key=value tuples as accepted by the libxeve `parse_xeve_params` function. The xeve project website is at https://github.com/mpeg5/xeve. #### 16.20.1 Options The following options are supported by the libxeve wrapper. The xeve-equivalent options or values are listed in parentheses for easy migration. To reduce the duplication of documentation, only the private options and some others requiring special attention are documented here. For the documentation of the undocumented generic options, see the Codec Options chapter. To get a more accurate and extensive documentation of the libxeve options, invoke the command `xeve_app --help` or consult the libxeve documentation. b (_bitrate_) Set target video bitrate in bits/s. Note that FFmpeg’s b option is expressed in bits/s, while xeve’s bitrate is in kilobits/s. bf (_bframes_) Set the maximum number of B frames (1,3,7,15). g (_keyint_) Set the GOP size (I-picture period). preset (_preset_) Set the xeve preset. Set the encoder preset value to determine encoding speed \[fast, medium, slow, placebo\] tune (_tune_) Set the encoder tune parameter \[psnr, zerolatency\] profile (_profile_) Set the encoder profile \[0: baseline; 1: main\] crf (_crf_) Set the quality for constant quality mode. Constant rate factor <10..49> \[default: 32\] qp (_qp_) Set constant quantization rate control method parameter. Quantization parameter qp <0..51> \[default: 32\] threads (_threads_) Force to use a specific number of threads ### 16.21 libxvid Xvid MPEG-4 Part 2 encoder wrapper. This encoder requires the presence of the libxvidcore headers and library during configuration. You need to explicitly configure the build with `--enable-libxvid --enable-gpl`. The native `mpeg4` encoder supports the MPEG-4 Part 2 format, so users can encode to this format without this library. #### 16.21.1 Options The following options are supported by the libxvid wrapper. Some of the following options are listed but are not documented, and correspond to shared codec options. See the Codec Options chapter for their documentation. The other shared options which are not listed have no effect for the libxvid encoder. b g qmin qmax mpeg\_quant threads bf b\_qfactor b\_qoffset flags Set specific encoding flags. Possible values: ‘mv4’ Use four motion vector by macroblock. ‘aic’ Enable high quality AC prediction. ‘gray’ Only encode grayscale. ‘qpel’ Enable quarter-pixel motion compensation. ‘cgop’ Enable closed GOP. ‘global\_header’ Place global headers in extradata instead of every keyframe. gmc Enable the use of global motion compensation (GMC). Default is 0 (disabled). me\_quality Set motion estimation quality level. Possible values in decreasing order of speed and increasing order of quality: ‘0’ Use no motion estimation (default). ‘1, 2’ Enable advanced diamond zonal search for 16x16 blocks and half-pixel refinement for 16x16 blocks. ‘3, 4’ Enable all of the things described above, plus advanced diamond zonal search for 8x8 blocks and half-pixel refinement for 8x8 blocks, also enable motion estimation on chroma planes for P and B-frames. ‘5, 6’ Enable all of the things described above, plus extended 16x16 and 8x8 blocks search. mbd Set macroblock decision algorithm. Possible values in the increasing order of quality: ‘simple’ Use macroblock comparing function algorithm (default). ‘bits’ Enable rate distortion-based half pixel and quarter pixel refinement for 16x16 blocks. ‘rd’ Enable all of the things described above, plus rate distortion-based half pixel and quarter pixel refinement for 8x8 blocks, and rate distortion-based search using square pattern. lumi\_aq Enable lumi masking adaptive quantization when set to 1. Default is 0 (disabled). variance\_aq Enable variance adaptive quantization when set to 1. Default is 0 (disabled). When combined with lumi\_aq, the resulting quality will not be better than any of the two specified individually. In other words, the resulting quality will be the worse one of the two effects. trellis Set rate-distortion optimal quantization. ssim Set structural similarity (SSIM) displaying method. Possible values: ‘off’ Disable displaying of SSIM information. ‘avg’ Output average SSIM at the end of encoding to stdout. The format of showing the average SSIM is: Average SSIM: %f For users who are not familiar with C, %f means a float number, or a decimal (e.g. 0.939232). ‘frame’ Output both per-frame SSIM data during encoding and average SSIM at the end of encoding to stdout. The format of per-frame information is: SSIM: avg: %1.3f min: %1.3f max: %1.3f For users who are not familiar with C, %1.3f means a float number rounded to 3 digits after the dot (e.g. 0.932). ssim\_acc Set SSIM accuracy. Valid options are integers within the range of 0-4, while 0 gives the most accurate result and 4 computes the fastest. ### 16.22 MediaFoundation This provides wrappers to encoders (both audio and video) in the MediaFoundation framework. It can access both SW and HW encoders. Video encoders can take input in either of nv12 or yuv420p form (some encoders support both, some support only either - in practice, nv12 is the safer choice, especially among HW encoders). ### 16.23 Microsoft RLE Microsoft RLE aka MSRLE encoder. Only 8-bit palette mode supported. Compatible with Windows 3.1 and Windows 95. #### 16.23.1 Options g integer Keyframe interval. A keyframe is inserted at least every `-g` frames, sometimes sooner. ### 16.24 mpeg2 MPEG-2 video encoder. #### 16.24.1 Options profile Select the mpeg2 profile to encode: ‘422’ ‘high’ ‘ss’ Spatially Scalable ‘snr’ SNR Scalable ‘main’ ‘simple’ level Select the mpeg2 level to encode: ‘high’ ‘high1440’ ‘main’ ‘low’ seq\_disp\_ext integer Specifies if the encoder should write a sequence\_display\_extension to the output. \-1 auto Decide automatically to write it or not (this is the default) by checking if the data to be written is different from the default or unspecified values. 0 never Never write it. 1 always Always write it. video\_format integer Specifies the video\_format written into the sequence display extension indicating the source of the video pictures. The default is ‘unspecified’, can be ‘component’, ‘pal’, ‘ntsc’, ‘secam’ or ‘mac’. For maximum compatibility, use ‘component’. a53cc boolean Import closed captions (which must be ATSC compatible format) into output. Default is 1 (on). ### 16.25 png PNG image encoder. #### 16.25.1 Private options dpi integer Set physical density of pixels, in dots per inch, unset by default dpm integer Set physical density of pixels, in dots per meter, unset by default ### 16.26 ProRes Apple ProRes encoder. FFmpeg contains 2 ProRes encoders, the prores-aw and prores-ks encoder. The used encoder can be chosen with the `-vcodec` option. #### 16.26.1 Private Options for prores-ks profile integer Select the ProRes profile to encode ‘proxy’ ‘lt’ ‘standard’ ‘hq’ ‘4444’ ‘4444xq’ quant\_mat integer Select quantization matrix. ‘auto’ ‘default’ ‘proxy’ ‘lt’ ‘standard’ ‘hq’ If set to auto, the matrix matching the profile will be picked. If not set, the matrix providing the highest quality, default, will be picked. bits\_per\_mb integer How many bits to allot for coding one macroblock. Different profiles use between 200 and 2400 bits per macroblock, the maximum is 8000. mbs\_per\_slice integer Number of macroblocks in each slice (1-8); the default value (8) should be good in almost all situations. vendor string Override the 4-byte vendor ID. A custom vendor ID like apl0 would claim the stream was produced by the Apple encoder. alpha\_bits integer Specify number of bits for alpha component. Possible values are 0, 8 and 16. Use 0 to disable alpha plane coding. #### 16.26.2 Speed considerations In the default mode of operation the encoder has to honor frame constraints (i.e. not produce frames with size bigger than requested) while still making output picture as good as possible. A frame containing a lot of small details is harder to compress and the encoder would spend more time searching for appropriate quantizers for each slice. Setting a higher bits\_per\_mb limit will improve the speed. For the fastest encoding speed set the qscale parameter (4 is the recommended value) and do not set a size constraint. ### 16.27 QSV Encoders The family of Intel QuickSync Video encoders (MPEG-2, H.264, HEVC, JPEG/MJPEG, VP9, AV1) #### 16.27.1 Ratecontrol Method The ratecontrol method is selected as follows: * When global\_quality is specified, a quality-based mode is used. Specifically this means either * \- CQP - constant quantizer scale, when the qscale codec flag is also set (the \-qscale ffmpeg option). * \- LA\_ICQ - intelligent constant quality with lookahead, when the look\_ahead option is also set. * \- ICQ – intelligent constant quality otherwise. For the ICQ modes, global quality range is 1 to 51, with 1 being the best quality. * Otherwise when the desired average bitrate is specified with the b option, a bitrate-based mode is used. * \- LA - VBR with lookahead, when the look\_ahead option is specified. * \- VCM - video conferencing mode, when the vcm option is set. * \- CBR - constant bitrate, when maxrate is specified and equal to the average bitrate. * \- VBR - variable bitrate, when maxrate is specified, but is higher than the average bitrate. * \- AVBR - average VBR mode, when maxrate is not specified, both avbr\_accuracy and avbr\_convergence are set to non-zero. This mode is available for H264 and HEVC on Windows. * Otherwise the default ratecontrol method CQP is used. Note that depending on your system, a different mode than the one you specified may be selected by the encoder. Set the verbosity level to verbose or higher to see the actual settings used by the QSV runtime. #### 16.27.2 Global Options -> MSDK Options Additional libavcodec global options are mapped to MSDK options as follows: * g/gop\_size -> GopPicSize * bf/max\_b\_frames+1 -> GopRefDist * rc\_init\_occupancy/rc\_initial\_buffer\_occupancy -> InitialDelayInKB * slices -> NumSlice * refs -> NumRefFrame * b\_strategy/b\_frame\_strategy -> BRefType * cgop/CLOSED\_GOP codec flag -> GopOptFlag * For the CQP mode, the i\_qfactor/i\_qoffset and b\_qfactor/b\_qoffset set the difference between QPP and QPI, and QPP and QPB respectively. * Setting the coder option to the value vlc will make the H.264 encoder use CAVLC instead of CABAC. #### 16.27.3 Common Options Following options are used by all qsv encoders. async\_depth Specifies how many asynchronous operations an application performs before the application explicitly synchronizes the result. If zero, the value is not specified. preset This option itemizes a range of choices from veryfast (best speed) to veryslow (best quality). ‘veryfast’ ‘faster’ ‘fast’ ‘medium’ ‘slow’ ‘slower’ ‘veryslow’ forced\_idr Forcing I frames as IDR frames. low\_power For encoders set this flag to ON to reduce power consumption and GPU usage. #### 16.27.4 Runtime Options Following options can be used durning qsv encoding. global\_quality i\_quant\_factor i\_quant\_offset b\_quant\_factor b\_quant\_offset Supported in h264\_qsv and hevc\_qsv. Change these value to reset qsv codec’s qp configuration. max\_frame\_size Supported in h264\_qsv and hevc\_qsv. Change this value to reset qsv codec’s MaxFrameSize configuration. gop\_size Change this value to reset qsv codec’s gop configuration. int\_ref\_type int\_ref\_cycle\_size int\_ref\_qp\_delta int\_ref\_cycle\_dist Supported in h264\_qsv and hevc\_qsv. Change these value to reset qsv codec’s Intra Refresh configuration. qmax qmin max\_qp\_i min\_qp\_i max\_qp\_p min\_qp\_p max\_qp\_b min\_qp\_b Supported in h264\_qsv. Change these value to reset qsv codec’s max/min qp configuration. low\_delay\_brc Supported in h264\_qsv, hevc\_qsv and av1\_qsv. Change this value to reset qsv codec’s low\_delay\_brc configuration. framerate Change this value to reset qsv codec’s framerate configuration. bit\_rate rc\_buffer\_size rc\_initial\_buffer\_occupancy rc\_max\_rate Change these value to reset qsv codec’s bitrate control configuration. pic\_timing\_sei Supported in h264\_qsv and hevc\_qsv. Change this value to reset qsv codec’s pic\_timing\_sei configuration. qsv\_params Set QSV encoder parameters as a colon-separated list of key-value pairs. The qsv\_params should be formatted as `key1=value1:key2=value2:...`. These parameters are passed directly to the underlying Intel Quick Sync Video (QSV) encoder using the MFXSetParameter function. Example: ffmpeg -i input.mp4 -c:v h264\_qsv -qsv\_params "CodingOption1=1:CodingOption2=2" output.mp4 This option allows fine-grained control over various encoder-specific settings provided by the QSV encoder. #### 16.27.5 H264 options These options are used by h264\_qsv extbrc Extended bitrate control. recovery\_point\_sei Set this flag to insert the recovery point SEI message at the beginning of every intra refresh cycle. rdo Enable rate distortion optimization. max\_frame\_size Maximum encoded frame size in bytes. max\_frame\_size\_i Maximum encoded frame size for I frames in bytes. If this value is set as larger than zero, then for I frames the value set by max\_frame\_size is ignored. max\_frame\_size\_p Maximum encoded frame size for P frames in bytes. If this value is set as larger than zero, then for P frames the value set by max\_frame\_size is ignored. max\_slice\_size Maximum encoded slice size in bytes. bitrate\_limit Toggle bitrate limitations. Modifies bitrate to be in the range imposed by the QSV encoder. Setting this flag off may lead to violation of HRD conformance. Mind that specifying bitrate below the QSV encoder range might significantly affect quality. If on this option takes effect in non CQP modes: if bitrate is not in the range imposed by the QSV encoder, it will be changed to be in the range. mbbrc Setting this flag enables macroblock level bitrate control that generally improves subjective visual quality. Enabling this flag may have negative impact on performance and objective visual quality metric. low\_delay\_brc Setting this flag turns on or off LowDelayBRC feautre in qsv plugin, which provides more accurate bitrate control to minimize the variance of bitstream size frame by frame. Value: -1-default 0-off 1-on adaptive\_i This flag controls insertion of I frames by the QSV encoder. Turn ON this flag to allow changing of frame type from P and B to I. adaptive\_b This flag controls changing of frame type from B to P. p\_strategy Enable P-pyramid: 0-default 1-simple 2-pyramid(bf need to be set to 0). b\_strategy This option controls usage of B frames as reference. dblk\_idc This option disable deblocking. It has value in range 0~2. cavlc If set, CAVLC is used; if unset, CABAC is used for encoding. vcm Video conferencing mode, please see ratecontrol method. idr\_interval Distance (in I-frames) between IDR frames. pic\_timing\_sei Insert picture timing SEI with pic\_struct\_syntax element. single\_sei\_nal\_unit Put all the SEI messages into one NALU. max\_dec\_frame\_buffering Maximum number of frames buffered in the DPB. look\_ahead Use VBR algorithm with look ahead. look\_ahead\_depth Depth of look ahead in number frames. look\_ahead\_downsampling Downscaling factor for the frames saved for the lookahead analysis. ‘unknown’ ‘auto’ ‘off’ ‘2x’ ‘4x’ int\_ref\_type Specifies intra refresh type. The major goal of intra refresh is improvement of error resilience without significant impact on encoded bitstream size caused by I frames. The SDK encoder achieves this by encoding part of each frame in refresh cycle using intra MBs. none means no refresh. vertical means vertical refresh, by column of MBs. horizontal means horizontal refresh, by rows of MBs. slice means horizontal refresh by slices without overlapping. In case of slice, in\_ref\_cycle\_size is ignored. To enable intra refresh, B frame should be set to 0. int\_ref\_cycle\_size Specifies number of pictures within refresh cycle starting from 2. 0 and 1 are invalid values. int\_ref\_qp\_delta Specifies QP difference for inserted intra MBs. This is signed value in \[-51, 51\] range if target encoding bit-depth for luma samples is 8 and this range is \[-63, 63\] for 10 bit-depth or \[-75, 75\] for 12 bit-depth respectively. int\_ref\_cycle\_dist Distance between the beginnings of the intra-refresh cycles in frames. profile ‘unknown’ ‘baseline’ ‘main’ ‘high’ a53cc Use A53 Closed Captions (if available). aud Insert the Access Unit Delimiter NAL. mfmode Multi-Frame Mode. ‘off’ ‘auto’ repeat\_pps Repeat pps for every frame. max\_qp\_i Maximum video quantizer scale for I frame. min\_qp\_i Minimum video quantizer scale for I frame. max\_qp\_p Maximum video quantizer scale for P frame. min\_qp\_p Minimum video quantizer scale for P frame. max\_qp\_b Maximum video quantizer scale for B frame. min\_qp\_b Minimum video quantizer scale for B frame. scenario Provides a hint to encoder about the scenario for the encoding session. ‘unknown’ ‘displayremoting’ ‘videoconference’ ‘archive’ ‘livestreaming’ ‘cameracapture’ ‘videosurveillance’ ‘gamestreaming’ ‘remotegaming’ avbr\_accuracy Accuracy of the AVBR ratecontrol (unit of tenth of percent). avbr\_convergence Convergence of the AVBR ratecontrol (unit of 100 frames) The parameters avbr\_accuracy and avbr\_convergence are for the average variable bitrate control (AVBR) algorithm. The algorithm focuses on overall encoding quality while meeting the specified bitrate, target\_bitrate, within the accuracy range avbr\_accuracy, after a avbr\_Convergence period. This method does not follow HRD and the instant bitrate is not capped or padded. skip\_frame Use per-frame metadata "qsv\_skip\_frame" to skip frame when encoding. This option defines the usage of this metadata. ‘no\_skip’ Frame skipping is disabled. ‘insert\_dummy’ Encoder inserts into bitstream frame where all macroblocks are encoded as skipped. ‘insert\_nothing’ Similar to insert\_dummy, but encoder inserts nothing into bitstream. The skipped frames are still used in brc. For example, gop still include skipped frames, and the frames after skipped frames will be larger in size. ‘brc\_only’ skip\_frame metadata indicates the number of missed frames before the current frame. #### 16.27.6 HEVC Options These options are used by hevc\_qsv extbrc Extended bitrate control. recovery\_point\_sei Set this flag to insert the recovery point SEI message at the beginning of every intra refresh cycle. rdo Enable rate distortion optimization. max\_frame\_size Maximum encoded frame size in bytes. max\_frame\_size\_i Maximum encoded frame size for I frames in bytes. If this value is set as larger than zero, then for I frames the value set by max\_frame\_size is ignored. max\_frame\_size\_p Maximum encoded frame size for P frames in bytes. If this value is set as larger than zero, then for P frames the value set by max\_frame\_size is ignored. max\_slice\_size Maximum encoded slice size in bytes. mbbrc Setting this flag enables macroblock level bitrate control that generally improves subjective visual quality. Enabling this flag may have negative impact on performance and objective visual quality metric. low\_delay\_brc Setting this flag turns on or off LowDelayBRC feautre in qsv plugin, which provides more accurate bitrate control to minimize the variance of bitstream size frame by frame. Value: -1-default 0-off 1-on adaptive\_i This flag controls insertion of I frames by the QSV encoder. Turn ON this flag to allow changing of frame type from P and B to I. adaptive\_b This flag controls changing of frame type from B to P. p\_strategy Enable P-pyramid: 0-default 1-simple 2-pyramid(bf need to be set to 0). b\_strategy This option controls usage of B frames as reference. dblk\_idc This option disable deblocking. It has value in range 0~2. idr\_interval Distance (in I-frames) between IDR frames. ‘begin\_only’ Output an IDR-frame only at the beginning of the stream. load\_plugin A user plugin to load in an internal session. ‘none’ ‘hevc\_sw’ ‘hevc\_hw’ load\_plugins A :-separate list of hexadecimal plugin UIDs to load in an internal session. look\_ahead\_depth Depth of look ahead in number frames, available when extbrc option is enabled. profile Set the encoding profile (scc requires libmfx >= 1.32). ‘unknown’ ‘main’ ‘main10’ ‘mainsp’ ‘rext’ ‘scc’ tier Set the encoding tier (only level >= 4 can support high tier). This option only takes effect when the level option is specified. ‘main’ ‘high’ gpb 1: GPB (generalized P/B frame) 0: regular P frame. tile\_cols Number of columns for tiled encoding. tile\_rows Number of rows for tiled encoding. aud Insert the Access Unit Delimiter NAL. pic\_timing\_sei Insert picture timing SEI with pic\_struct\_syntax element. transform\_skip Turn this option ON to enable transformskip. It is supported on platform equal or newer than ICL. int\_ref\_type Specifies intra refresh type. The major goal of intra refresh is improvement of error resilience without significant impact on encoded bitstream size caused by I frames. The SDK encoder achieves this by encoding part of each frame in refresh cycle using intra MBs. none means no refresh. vertical means vertical refresh, by column of MBs. horizontal means horizontal refresh, by rows of MBs. slice means horizontal refresh by slices without overlapping. In case of slice, in\_ref\_cycle\_size is ignored. To enable intra refresh, B frame should be set to 0. int\_ref\_cycle\_size Specifies number of pictures within refresh cycle starting from 2. 0 and 1 are invalid values. int\_ref\_qp\_delta Specifies QP difference for inserted intra MBs. This is signed value in \[-51, 51\] range if target encoding bit-depth for luma samples is 8 and this range is \[-63, 63\] for 10 bit-depth or \[-75, 75\] for 12 bit-depth respectively. int\_ref\_cycle\_dist Distance between the beginnings of the intra-refresh cycles in frames. max\_qp\_i Maximum video quantizer scale for I frame. min\_qp\_i Minimum video quantizer scale for I frame. max\_qp\_p Maximum video quantizer scale for P frame. min\_qp\_p Minimum video quantizer scale for P frame. max\_qp\_b Maximum video quantizer scale for B frame. min\_qp\_b Minimum video quantizer scale for B frame. scenario Provides a hint to encoder about the scenario for the encoding session. ‘unknown’ ‘displayremoting’ ‘videoconference’ ‘archive’ ‘livestreaming’ ‘cameracapture’ ‘videosurveillance’ ‘gamestreaming’ ‘remotegaming’ avbr\_accuracy Accuracy of the AVBR ratecontrol (unit of tenth of percent). avbr\_convergence Convergence of the AVBR ratecontrol (unit of 100 frames) The parameters avbr\_accuracy and avbr\_convergence are for the average variable bitrate control (AVBR) algorithm. The algorithm focuses on overall encoding quality while meeting the specified bitrate, target\_bitrate, within the accuracy range avbr\_accuracy, after a avbr\_Convergence period. This method does not follow HRD and the instant bitrate is not capped or padded. skip\_frame Use per-frame metadata "qsv\_skip\_frame" to skip frame when encoding. This option defines the usage of this metadata. ‘no\_skip’ Frame skipping is disabled. ‘insert\_dummy’ Encoder inserts into bitstream frame where all macroblocks are encoded as skipped. ‘insert\_nothing’ Similar to insert\_dummy, but encoder inserts nothing into bitstream. The skipped frames are still used in brc. For example, gop still include skipped frames, and the frames after skipped frames will be larger in size. ‘brc\_only’ skip\_frame metadata indicates the number of missed frames before the current frame. #### 16.27.7 MPEG2 Options These options are used by mpeg2\_qsv profile ‘unknown’ ‘simple’ ‘main’ ‘high’ #### 16.27.8 VP9 Options These options are used by vp9\_qsv profile ‘unknown’ ‘profile0’ ‘profile1’ ‘profile2’ ‘profile3’ tile\_cols Number of columns for tiled encoding (requires libmfx >= 1.29). tile\_rows Number of rows for tiled encoding (requires libmfx >= 1.29). #### 16.27.9 AV1 Options These options are used by av1\_qsv (requires libvpl). profile ‘unknown’ ‘main’ tile\_cols Number of columns for tiled encoding. tile\_rows Number of rows for tiled encoding. adaptive\_i This flag controls insertion of I frames by the QSV encoder. Turn ON this flag to allow changing of frame type from P and B to I. adaptive\_b This flag controls changing of frame type from B to P. b\_strategy This option controls usage of B frames as reference. extbrc Extended bitrate control. look\_ahead\_depth Depth of look ahead in number frames, available when extbrc option is enabled. low\_delay\_brc Setting this flag turns on or off LowDelayBRC feautre in qsv plugin, which provides more accurate bitrate control to minimize the variance of bitstream size frame by frame. Value: -1-default 0-off 1-on max\_frame\_size Set the allowed max size in bytes for each frame. If the frame size exceeds the limitation, encoder will adjust the QP value to control the frame size. Invalid in CQP rate control mode. max\_frame\_size\_i Maximum encoded frame size for I frames in bytes. If this value is set as larger than zero, then for I frames the value set by max\_frame\_size is ignored. max\_frame\_size\_p Maximum encoded frame size for P frames in bytes. If this value is set as larger than zero, then for P frames the value set by max\_frame\_size is ignored. ### 16.28 snow #### 16.28.1 Options iterative\_dia\_size dia size for the iterative motion estimation ### 16.29 VAAPI encoders Wrappers for hardware encoders accessible via VAAPI. These encoders only accept input in VAAPI hardware surfaces. If you have input in software frames, use the hwupload filter to upload them to the GPU. The following standard libavcodec options are used: * g / gop\_size * bf / max\_b\_frames * profile If not set, this will be determined automatically from the format of the input frames and the profiles supported by the driver. * level * b / bit\_rate * maxrate / rc\_max\_rate * bufsize / rc\_buffer\_size * rc\_init\_occupancy / rc\_initial\_buffer\_occupancy * compression\_level Speed / quality tradeoff: higher values are faster / worse quality. * q / global\_quality Size / quality tradeoff: higher values are smaller / worse quality. * qmin * qmax * i\_qfactor / i\_quant\_factor * i\_qoffset / i\_quant\_offset * b\_qfactor / b\_quant\_factor * b\_qoffset / b\_quant\_offset * slices All encoders support the following options: low\_power Some drivers/platforms offer a second encoder for some codecs intended to use less power than the default encoder; setting this option will attempt to use that encoder. Note that it may support a reduced feature set, so some other options may not be available in this mode. idr\_interval Set the number of normal intra frames between full-refresh (IDR) frames in open-GOP mode. The intra frames are still IRAPs, but will not include global headers and may have non-decodable leading pictures. b\_depth Set the B-frame reference depth. When set to one (the default), all B-frames will refer only to P- or I-frames. When set to greater values multiple layers of B-frames will be present, frames in each layer only referring to frames in higher layers. async\_depth Maximum processing parallelism. Increase this to improve single channel performance. This option doesn’t work if driver doesn’t implement vaSyncBuffer function. Please make sure there are enough hw\_frames allocated if a large number of async\_depth is used. max\_frame\_size Set the allowed max size in bytes for each frame. If the frame size exceeds the limitation, encoder will adjust the QP value to control the frame size. Invalid in CQP rate control mode. rc\_mode Set the rate control mode to use. A given driver may only support a subset of modes. Possible modes: auto Choose the mode automatically based on driver support and the other options. This is the default. CQP Constant-quality. CBR Constant-bitrate. VBR Variable-bitrate. ICQ Intelligent constant-quality. QVBR Quality-defined variable-bitrate. AVBR Average variable bitrate. blbrc Enable block level rate control, which assigns different bitrate block by block. Invalid for CQP mode. Each encoder also has its own specific options: av1\_vaapi profile sets the value of _seq\_profile_. tier sets the value of _seq\_tier_. level sets the value of _seq\_level\_idx_. tiles Set the number of tiles to encode the input video with, as columns x rows. (default is auto, which means use minimal tile column/row number). tile\_groups Set tile groups number. All the tiles will be distributed as evenly as possible to each tile group. (default is 1). h264\_vaapi profile sets the value of _profile\_idc_ and the _constraint\_set\*\_flag_s. level sets the value of _level\_idc_. coder Set entropy encoder (default is _cabac_). Possible values: ‘ac’ ‘cabac’ Use CABAC. ‘vlc’ ‘cavlc’ Use CAVLC. aud Include access unit delimiters in the stream (not included by default). sei Set SEI message types to include. Some combination of the following values: ‘identifier’ Include a _user\_data\_unregistered_ message containing information about the encoder. ‘timing’ Include picture timing parameters (_buffering\_period_ and _pic\_timing_ messages). ‘recovery\_point’ Include recovery points where appropriate (_recovery\_point_ messages). hevc\_vaapi profile and level set the values of _general\_profile\_idc_ and _general\_level\_idc_ respectively. aud Include access unit delimiters in the stream (not included by default). tier Set _general\_tier\_flag_. This may affect the level chosen for the stream if it is not explicitly specified. sei Set SEI message types to include. Some combination of the following values: ‘hdr’ Include HDR metadata if the input frames have it (_mastering\_display\_colour\_volume_ and _content\_light\_level_ messages). tiles Set the number of tiles to encode the input video with, as columns x rows. Larger numbers allow greater parallelism in both encoding and decoding, but may decrease coding efficiency. mjpeg\_vaapi Only baseline DCT encoding is supported. The encoder always uses the standard quantisation and huffman tables - global\_quality scales the standard quantisation table (range 1-100). For YUV, 4:2:0, 4:2:2 and 4:4:4 subsampling modes are supported. RGB is also supported, and will create an RGB JPEG. jfif Include JFIF header in each frame (not included by default). huffman Include standard huffman tables (on by default). Turning this off will save a few hundred bytes in each output frame, but may lose compatibility with some JPEG decoders which don’t fully handle MJPEG. mpeg2\_vaapi profile and level set the value of _profile\_and\_level\_indication_. vp8\_vaapi B-frames are not supported. global\_quality sets the _q\_idx_ used for non-key frames (range 0-127). loop\_filter\_level loop\_filter\_sharpness Manually set the loop filter parameters. vp9\_vaapi global\_quality sets the _q\_idx_ used for P-frames (range 0-255). loop\_filter\_level loop\_filter\_sharpness Manually set the loop filter parameters. B-frames are supported, but the output stream is always in encode order rather than display order. If B-frames are enabled, it may be necessary to use the vp9\_raw\_reorder bitstream filter to modify the output stream to display frames in the correct order. Only normal frames are produced - the vp9\_superframe bitstream filter may be required to produce a stream usable with all decoders. ### 16.30 vbn Vizrt Binary Image encoder. This format is used by the broadcast vendor Vizrt for quick texture streaming. Advanced features of the format such as LZW compression of texture data or generation of mipmaps are not supported. #### 16.30.1 Options format string Sets the texture compression used by the VBN file. Can be dxt1, dxt5 or raw. Default is dxt5. ### 16.31 vc2 SMPTE VC-2 (previously BBC Dirac Pro). This codec was primarily aimed at professional broadcasting but since it supports yuv420, yuv422 and yuv444 at 8 (limited range or full range), 10 or 12 bits, this makes it suitable for other tasks which require low overhead and low compression (like screen recording). #### 16.31.1 Options b Sets target video bitrate. Usually that’s around 1:6 of the uncompressed video bitrate (e.g. for 1920x1080 50fps yuv422p10 that’s around 400Mbps). Higher values (close to the uncompressed bitrate) turn on lossless compression mode. field\_order Enables field coding when set (e.g. to tt - top field first) for interlaced inputs. Should increase compression with interlaced content as it splits the fields and encodes each separately. wavelet\_depth Sets the total amount of wavelet transforms to apply, between 1 and 5 (default). Lower values reduce compression and quality. Less capable decoders may not be able to handle values of wavelet\_depth over 3. wavelet\_type Sets the transform type. Currently only 5\_3 (LeGall) and 9\_7 (Deslauriers-Dubuc) are implemented, with 9\_7 being the one with better compression and thus is the default. slice\_width slice\_height Sets the slice size for each slice. Larger values result in better compression. For compatibility with other more limited decoders use slice\_width of 32 and slice\_height of 8. tolerance Sets the undershoot tolerance of the rate control system in percent. This is to prevent an expensive search from being run. qm Sets the quantization matrix preset to use by default or when wavelet\_depth is set to 5 * \- default Uses the default quantization matrix from the specifications, extended with values for the fifth level. This provides a good balance between keeping detail and omitting artifacts. * \- flat Use a completely zeroed out quantization matrix. This increases PSNR but might reduce perception. Use in bogus benchmarks. * \- color Reduces detail but attempts to preserve color at extremely low bitrates. ## 17 Subtitles Encoders ### 17.1 dvdsub This codec encodes the bitmap subtitle format that is used in DVDs. Typically they are stored in VOBSUB file pairs (\*.idx + \*.sub), and they can also be used in Matroska files. #### 17.1.1 Options palette Specify the global palette used by the bitmaps. The format for this option is a string containing 16 24-bits hexadecimal numbers (without 0x prefix) separated by commas, for example `0d00ee, ee450d, 101010, eaeaea, 0ce60b, ec14ed, ebff0b, 0d617a, 7b7b7b, d1d1d1, 7b2a0e, 0d950c, 0f007b, cf0dec, cfa80c, 7c127b`. even\_rows\_fix When set to 1, enable a work-around that makes the number of pixel rows even in all subtitles. This fixes a problem with some players that cut off the bottom row if the number is odd. The work-around just adds a fully transparent row if needed. The overhead is low, typically one byte per subtitle on average. By default, this work-around is disabled. ## 18 Bitstream Filters When you configure your FFmpeg build, all the supported bitstream filters are enabled by default. You can list all available ones using the configure option `--list-bsfs`. You can disable all the bitstream filters using the configure option `--disable-bsfs`, and selectively enable any bitstream filter using the option `--enable-bsf=BSF`, or you can disable a particular bitstream filter using the option `--disable-bsf=BSF`. The option `-bsfs` of the ff\* tools will display the list of all the supported bitstream filters included in your build. The ff\* tools have a -bsf option applied per stream, taking a comma-separated list of filters, whose parameters follow the filter name after a ’=’. ffmpeg -i INPUT -c:v copy -bsf:v filter1\[=opt1=str1:opt2=str2\]\[,filter2\] OUTPUT Below is a description of the currently available bitstream filters, with their parameters, if any. ### 18.1 aac\_adtstoasc Convert MPEG-2/4 AAC ADTS to an MPEG-4 Audio Specific Configuration bitstream. This filter creates an MPEG-4 AudioSpecificConfig from an MPEG-2/4 ADTS header and removes the ADTS header. This filter is required for example when copying an AAC stream from a raw ADTS AAC or an MPEG-TS container to MP4A-LATM, to an FLV file, or to MOV/MP4 files and related formats such as 3GP or M4A. Please note that it is auto-inserted for MP4A-LATM and MOV/MP4 and related formats. ### 18.2 av1\_metadata Modify metadata embedded in an AV1 stream. td Insert or remove temporal delimiter OBUs in all temporal units of the stream. ‘insert’ Insert a TD at the beginning of every TU which does not already have one. ‘remove’ Remove the TD from the beginning of every TU which has one. color\_primaries transfer\_characteristics matrix\_coefficients Set the color description fields in the stream (see AV1 section 6.4.2). color\_range Set the color range in the stream (see AV1 section 6.4.2; note that this cannot be set for streams using BT.709 primaries, sRGB transfer characteristic and identity (RGB) matrix coefficients). ‘tv’ Limited range. ‘pc’ Full range. chroma\_sample\_position Set the chroma sample location in the stream (see AV1 section 6.4.2). This can only be set for 4:2:0 streams. ‘vertical’ Left position (matching the default in MPEG-2 and H.264). ‘colocated’ Top-left position. tick\_rate Set the tick rate (_time\_scale / num\_units\_in\_display\_tick_) in the timing info in the sequence header. num\_ticks\_per\_picture Set the number of ticks in each picture, to indicate that the stream has a fixed framerate. Ignored if tick\_rate is not also set. delete\_padding Deletes Padding OBUs. ### 18.3 chomp Remove zero padding at the end of a packet. ### 18.4 dca\_core Extract the core from a DCA/DTS stream, dropping extensions such as DTS-HD. ### 18.5 dovi\_rpu Manipulate Dolby Vision metadata in a HEVC/AV1 bitstream, optionally enabling metadata compression. strip If enabled, strip all Dolby Vision metadata (configuration record + RPU data blocks) from the stream. compression Which compression level to enable. ‘none’ No metadata compression. ‘limited’ Limited metadata compression scheme. Should be compatible with most devices. This is the default. ‘extended’ Extended metadata compression. Devices are not required to support this. Note that this level currently behaves the same as ‘limited’ in libavcodec. ### 18.6 dump\_extra Add extradata to the beginning of the filtered packets except when said packets already exactly begin with the extradata that is intended to be added. freq The additional argument specifies which packets should be filtered. It accepts the values: ‘k’ ‘keyframe’ add extradata to all key packets ‘e’ ‘all’ add extradata to all packets If not specified it is assumed ‘k’. For example the following `ffmpeg` command forces a global header (thus disabling individual packet headers) in the H.264 packets generated by the `libx264` encoder, but corrects them by adding the header stored in extradata to the key packets: ffmpeg -i INPUT -map 0 -flags:v +global\_header -c:v libx264 -bsf:v dump\_extra out.ts ### 18.7 dv\_error\_marker Blocks in DV which are marked as damaged are replaced by blocks of the specified color. color The color to replace damaged blocks by sta A 16 bit mask which specifies which of the 16 possible error status values are to be replaced by colored blocks. 0xFFFE is the default which replaces all non 0 error status values. ‘ok’ No error, no concealment ‘err’ Error, No concealment ‘res’ Reserved ‘notok’ Error or concealment ‘notres’ Not reserved ‘Aa, Ba, Ca, Ab, Bb, Cb, A, B, C, a, b, erri, erru’ The specific error status code see page 44-46 or section 5.5 of http://web.archive.org/web/20060927044735/http://www.smpte.org/smpte\_store/standards/pdf/s314m.pdf ### 18.8 eac3\_core Extract the core from a E-AC-3 stream, dropping extra channels. ### 18.9 extract\_extradata Extract the in-band extradata. Certain codecs allow the long-term headers (e.g. MPEG-2 sequence headers, or H.264/HEVC (VPS/)SPS/PPS) to be transmitted either "in-band" (i.e. as a part of the bitstream containing the coded frames) or "out of band" (e.g. on the container level). This latter form is called "extradata" in FFmpeg terminology. This bitstream filter detects the in-band headers and makes them available as extradata. remove When this option is enabled, the long-term headers are removed from the bitstream after extraction. ### 18.10 filter\_units Remove units with types in or not in a given set from the stream. pass\_types List of unit types or ranges of unit types to pass through while removing all others. This is specified as a ’|’-separated list of unit type values or ranges of values with ’-’. remove\_types Identical to pass\_types, except the units in the given set removed and all others passed through. The types used by pass\_types and remove\_types correspond to NAL unit types (nal\_unit\_type) in H.264, HEVC and H.266 (see Table 7-1 in the H.264 and HEVC specifications or Table 5 in the H.266 specification), to marker values for JPEG (without 0xFF prefix) and to start codes without start code prefix (i.e. the byte following the 0x000001) for MPEG-2. For VP8 and VP9, every unit has type zero. Extradata is unchanged by this transformation, but note that if the stream contains inline parameter sets then the output may be unusable if they are removed. For example, to remove all non-VCL NAL units from an H.264 stream: ffmpeg -i INPUT -c:v copy -bsf:v 'filter\_units=pass\_types=1-5' OUTPUT To remove all AUDs, SEI and filler from an H.265 stream: ffmpeg -i INPUT -c:v copy -bsf:v 'filter\_units=remove\_types=35|38-40' OUTPUT To remove all user data from a MPEG-2 stream, including Closed Captions: ffmpeg -i INPUT -c:v copy -bsf:v 'filter\_units=remove\_types=178' OUTPUT To remove all SEI from a H264 stream, including Closed Captions: ffmpeg -i INPUT -c:v copy -bsf:v 'filter\_units=remove\_types=6' OUTPUT To remove all prefix and suffix SEI from a HEVC stream, including Closed Captions and dynamic HDR: ffmpeg -i INPUT -c:v copy -bsf:v 'filter\_units=remove\_types=39|40' OUTPUT ### 18.11 hapqa\_extract Extract Rgb or Alpha part of an HAPQA file, without recompression, in order to create an HAPQ or an HAPAlphaOnly file. texture Specifies the texture to keep. color alpha Convert HAPQA to HAPQ ffmpeg -i hapqa\_inputfile.mov -c copy -bsf:v hapqa\_extract=texture=color -tag:v HapY -metadata:s:v:0 encoder="HAPQ" hapq\_file.mov Convert HAPQA to HAPAlphaOnly ffmpeg -i hapqa\_inputfile.mov -c copy -bsf:v hapqa\_extract=texture=alpha -tag:v HapA -metadata:s:v:0 encoder="HAPAlpha Only" hapalphaonly\_file.mov ### 18.12 h264\_metadata Modify metadata embedded in an H.264 stream. aud Insert or remove AUD NAL units in all access units of the stream. ‘pass’ ‘insert’ ‘remove’ Default is pass. sample\_aspect\_ratio Set the sample aspect ratio of the stream in the VUI parameters. See H.264 table E-1. overscan\_appropriate\_flag Set whether the stream is suitable for display using overscan or not (see H.264 section E.2.1). video\_format video\_full\_range\_flag Set the video format in the stream (see H.264 section E.2.1 and table E-2). colour\_primaries transfer\_characteristics matrix\_coefficients Set the colour description in the stream (see H.264 section E.2.1 and tables E-3, E-4 and E-5). chroma\_sample\_loc\_type Set the chroma sample location in the stream (see H.264 section E.2.1 and figure E-1). tick\_rate Set the tick rate (time\_scale / num\_units\_in\_tick) in the VUI parameters. This is the smallest time unit representable in the stream, and in many cases represents the field rate of the stream (double the frame rate). fixed\_frame\_rate\_flag Set whether the stream has fixed framerate - typically this indicates that the framerate is exactly half the tick rate, but the exact meaning is dependent on interlacing and the picture structure (see H.264 section E.2.1 and table E-6). zero\_new\_constraint\_set\_flags Zero constraint\_set4\_flag and constraint\_set5\_flag in the SPS. These bits were reserved in a previous version of the H.264 spec, and thus some hardware decoders require these to be zero. The result of zeroing this is still a valid bitstream. crop\_left crop\_right crop\_top crop\_bottom Set the frame cropping offsets in the SPS. These values will replace the current ones if the stream is already cropped. These fields are set in pixels. Note that some sizes may not be representable if the chroma is subsampled or the stream is interlaced (see H.264 section 7.4.2.1.1). sei\_user\_data Insert a string as SEI unregistered user data. The argument must be of the form _UUID+string_, where the UUID is as hex digits possibly separated by hyphens, and the string can be anything. For example, ‘086f3693-b7b3-4f2c-9653-21492feee5b8+hello’ will insert the string “hello” associated with the given UUID. delete\_filler Deletes both filler NAL units and filler SEI messages. display\_orientation Insert, extract or remove Display orientation SEI messages. See H.264 section D.1.27 and D.2.27 for syntax and semantics. ‘pass’ ‘insert’ ‘remove’ ‘extract’ Default is pass. Insert mode works in conjunction with `rotate` and `flip` options. Any pre-existing Display orientation messages will be removed in insert or remove mode. Extract mode attaches the display matrix to the packet as side data. rotate Set rotation in display orientation SEI (anticlockwise angle in degrees). Range is -360 to +360. Default is NaN. flip Set flip in display orientation SEI. ‘horizontal’ ‘vertical’ Default is unset. level Set the level in the SPS. Refer to H.264 section A.3 and tables A-1 to A-5. The argument must be the name of a level (for example, ‘4.2’), a level\_idc value (for example, ‘42’), or the special name ‘auto’ indicating that the filter should attempt to guess the level from the input stream properties. ### 18.13 h264\_mp4toannexb Convert an H.264 bitstream from length prefixed mode to start code prefixed mode (as defined in the Annex B of the ITU-T H.264 specification). This is required by some streaming formats, typically the MPEG-2 transport stream format (muxer `mpegts`). For example to remux an MP4 file containing an H.264 stream to mpegts format with `ffmpeg`, you can use the command: ffmpeg -i INPUT.mp4 -codec copy -bsf:v h264\_mp4toannexb OUTPUT.ts Please note that this filter is auto-inserted for MPEG-TS (muxer `mpegts`) and raw H.264 (muxer `h264`) output formats. ### 18.14 h264\_redundant\_pps This applies a specific fixup to some Blu-ray BDMV H264 streams which contain redundant PPSs. The PPSs modify irrelevant parameters of the stream, confusing other transformations which require the correct extradata. The encoder used on these impacted streams adds extra PPSs throughout the stream, varying the initial QP and whether weighted prediction was enabled. This causes issues after copying the stream into a global header container, as the starting PPS is not suitable for the rest of the stream. One side effect, for example, is seeking will return garbled output until a new PPS appears. This BSF removes the extra PPSs and rewrites the slice headers such that the stream uses a single leading PPS in the global header, which resolves the issue. ### 18.15 hevc\_metadata Modify metadata embedded in an HEVC stream. aud Insert or remove AUD NAL units in all access units of the stream. ‘insert’ ‘remove’ sample\_aspect\_ratio Set the sample aspect ratio in the stream in the VUI parameters. video\_format video\_full\_range\_flag Set the video format in the stream (see H.265 section E.3.1 and table E.2). colour\_primaries transfer\_characteristics matrix\_coefficients Set the colour description in the stream (see H.265 section E.3.1 and tables E.3, E.4 and E.5). chroma\_sample\_loc\_type Set the chroma sample location in the stream (see H.265 section E.3.1 and figure E.1). tick\_rate Set the tick rate in the VPS and VUI parameters (time\_scale / num\_units\_in\_tick). Combined with num\_ticks\_poc\_diff\_one, this can set a constant framerate in the stream. Note that it is likely to be overridden by container parameters when the stream is in a container. num\_ticks\_poc\_diff\_one Set poc\_proportional\_to\_timing\_flag in VPS and VUI and use this value to set num\_ticks\_poc\_diff\_one\_minus1 (see H.265 sections 7.4.3.1 and E.3.1). Ignored if tick\_rate is not also set. crop\_left crop\_right crop\_top crop\_bottom Set the conformance window cropping offsets in the SPS. These values will replace the current ones if the stream is already cropped. These fields are set in pixels. Note that some sizes may not be representable if the chroma is subsampled (H.265 section 7.4.3.2.1). width height Set width and height after crop. level Set the level in the VPS and SPS. See H.265 section A.4 and tables A.6 and A.7. The argument must be the name of a level (for example, ‘5.1’), a _general\_level\_idc_ value (for example, ‘153’ for level 5.1), or the special name ‘auto’ indicating that the filter should attempt to guess the level from the input stream properties. ### 18.16 hevc\_mp4toannexb Convert an HEVC/H.265 bitstream from length prefixed mode to start code prefixed mode (as defined in the Annex B of the ITU-T H.265 specification). This is required by some streaming formats, typically the MPEG-2 transport stream format (muxer `mpegts`). For example to remux an MP4 file containing an HEVC stream to mpegts format with `ffmpeg`, you can use the command: ffmpeg -i INPUT.mp4 -codec copy -bsf:v hevc\_mp4toannexb OUTPUT.ts Please note that this filter is auto-inserted for MPEG-TS (muxer `mpegts`) and raw HEVC/H.265 (muxer `h265` or `hevc`) output formats. ### 18.17 imxdump Modifies the bitstream to fit in MOV and to be usable by the Final Cut Pro decoder. This filter only applies to the mpeg2video codec, and is likely not needed for Final Cut Pro 7 and newer with the appropriate \-tag:v. For example, to remux 30 MB/sec NTSC IMX to MOV: ffmpeg -i input.mxf -c copy -bsf:v imxdump -tag:v mx3n output.mov ### 18.18 mjpeg2jpeg Convert MJPEG/AVI1 packets to full JPEG/JFIF packets. MJPEG is a video codec wherein each video frame is essentially a JPEG image. The individual frames can be extracted without loss, e.g. by ffmpeg -i ../some\_mjpeg.avi -c:v copy frames\_%d.jpg Unfortunately, these chunks are incomplete JPEG images, because they lack the DHT segment required for decoding. Quoting from http://www.digitalpreservation.gov/formats/fdd/fdd000063.shtml: Avery Lee, writing in the rec.video.desktop newsgroup in 2001, commented that "MJPEG, or at least the MJPEG in AVIs having the MJPG fourcc, is restricted JPEG with a fixed – and \*omitted\* – Huffman table. The JPEG must be YCbCr colorspace, it must be 4:2:2, and it must use basic Huffman encoding, not arithmetic or progressive. . . . You can indeed extract the MJPEG frames and decode them with a regular JPEG decoder, but you have to prepend the DHT segment to them, or else the decoder won’t have any idea how to decompress the data. The exact table necessary is given in the OpenDML spec." This bitstream filter patches the header of frames extracted from an MJPEG stream (carrying the AVI1 header ID and lacking a DHT segment) to produce fully qualified JPEG images. ffmpeg -i mjpeg-movie.avi -c:v copy -bsf:v mjpeg2jpeg frame\_%d.jpg exiftran -i -9 frame\*.jpg ffmpeg -i frame\_%d.jpg -c:v copy rotated.avi ### 18.19 mjpegadump Add an MJPEG A header to the bitstream, to enable decoding by Quicktime. ### 18.20 mov2textsub Extract a representable text file from MOV subtitles, stripping the metadata header from each subtitle packet. See also the text2movsub filter. ### 18.21 mpeg2\_metadata Modify metadata embedded in an MPEG-2 stream. display\_aspect\_ratio Set the display aspect ratio in the stream. The following fixed values are supported: 4/3 16/9 221/100 Any other value will result in square pixels being signalled instead (see H.262 section 6.3.3 and table 6-3). frame\_rate Set the frame rate in the stream. This is constructed from a table of known values combined with a small multiplier and divisor - if the supplied value is not exactly representable, the nearest representable value will be used instead (see H.262 section 6.3.3 and table 6-4). video\_format Set the video format in the stream (see H.262 section 6.3.6 and table 6-6). colour\_primaries transfer\_characteristics matrix\_coefficients Set the colour description in the stream (see H.262 section 6.3.6 and tables 6-7, 6-8 and 6-9). ### 18.22 mpeg4\_unpack\_bframes Unpack DivX-style packed B-frames. DivX-style packed B-frames are not valid MPEG-4 and were only a workaround for the broken Video for Windows subsystem. They use more space, can cause minor AV sync issues, require more CPU power to decode (unless the player has some decoded picture queue to compensate the 2,0,2,0 frame per packet style) and cause trouble if copied into a standard container like mp4 or mpeg-ps/ts, because MPEG-4 decoders may not be able to decode them, since they are not valid MPEG-4. For example to fix an AVI file containing an MPEG-4 stream with DivX-style packed B-frames using `ffmpeg`, you can use the command: ffmpeg -i INPUT.avi -codec copy -bsf:v mpeg4\_unpack\_bframes OUTPUT.avi ### 18.23 noise Damages the contents of packets or simply drops them without damaging the container. Can be used for fuzzing or testing error resilience/concealment. Parameters: amount Accepts an expression whose evaluation per-packet determines how often bytes in that packet will be modified. A value below 0 will result in a variable frequency. Default is 0 which results in no modification. However, if neither amount nor drop is specified, amount will be set to \-1. See below for accepted variables. drop Accepts an expression evaluated per-packet whose value determines whether that packet is dropped. Evaluation to a positive value results in the packet being dropped. Evaluation to a negative value results in a variable chance of it being dropped, roughly inverse in proportion to the magnitude of the value. Default is 0 which results in no drops. See below for accepted variables. dropamount Accepts a non-negative integer, which assigns a variable chance of it being dropped, roughly inverse in proportion to the value. Default is 0 which results in no drops. This option is kept for backwards compatibility and is equivalent to setting drop to a negative value with the same magnitude i.e. `dropamount=4` is the same as `drop=-4`. Ignored if drop is also specified. Both `amount` and `drop` accept expressions containing the following variables: ‘n’ The index of the packet, starting from zero. ‘tb’ The timebase for packet timestamps. ‘pts’ Packet presentation timestamp. ‘dts’ Packet decoding timestamp. ‘nopts’ Constant representing AV\_NOPTS\_VALUE. ‘startpts’ First non-AV\_NOPTS\_VALUE PTS seen in the stream. ‘startdts’ First non-AV\_NOPTS\_VALUE DTS seen in the stream. ‘duration’ ‘d’ Packet duration, in timebase units. ‘pos’ Packet position in input; may be -1 when unknown or not set. ‘size’ Packet size, in bytes. ‘key’ Whether packet is marked as a keyframe. ‘state’ A pseudo random integer, primarily derived from the content of packet payload. #### 18.23.1 Examples Apply modification to every byte but don’t drop any packets. ffmpeg -i INPUT -c copy -bsf noise=1 output.mkv Drop every video packet not marked as a keyframe after timestamp 30s but do not modify any of the remaining packets. ffmpeg -i INPUT -c copy -bsf:v noise=drop='gt(t\\,30)\*not(key)' output.mkv Drop one second of audio every 10 seconds and add some random noise to the rest. ffmpeg -i INPUT -c copy -bsf:a noise=amount=-1:drop='between(mod(t\\,10)\\,9\\,10)' output.mkv ### 18.24 null This bitstream filter passes the packets through unchanged. ### 18.25 pcm\_rechunk Repacketize PCM audio to a fixed number of samples per packet or a fixed packet rate per second. This is similar to the (ffmpeg-filters)asetnsamples audio filter but works on audio packets instead of audio frames. nb\_out\_samples, n Set the number of samples per each output audio packet. The number is intended as the number of samples _per each channel_. Default value is 1024. pad, p If set to 1, the filter will pad the last audio packet with silence, so that it will contain the same number of samples (or roughly the same number of samples, see frame\_rate) as the previous ones. Default value is 1. frame\_rate, r This option makes the filter output a fixed number of packets per second instead of a fixed number of samples per packet. If the audio sample rate is not divisible by the frame rate then the number of samples will not be constant but will vary slightly so that each packet will start as close to the frame boundary as possible. Using this option has precedence over nb\_out\_samples. You can generate the well known 1602-1601-1602-1601-1602 pattern of 48kHz audio for NTSC frame rate using the frame\_rate option. ffmpeg -f lavfi -i sine=r=48000:d=1 -c pcm\_s16le -bsf pcm\_rechunk=r=30000/1001 -f framecrc - ### 18.26 pgs\_frame\_merge Merge a sequence of PGS Subtitle segments ending with an "end of display set" segment into a single packet. This is required by some containers that support PGS subtitles (muxer `matroska`). ### 18.27 prores\_metadata Modify color property metadata embedded in prores stream. color\_primaries Set the color primaries. Available values are: ‘auto’ Keep the same color primaries property (default). ‘unknown’ ‘bt709’ ‘bt470bg’ BT601 625 ‘smpte170m’ BT601 525 ‘bt2020’ ‘smpte431’ DCI P3 ‘smpte432’ P3 D65 transfer\_characteristics Set the color transfer. Available values are: ‘auto’ Keep the same transfer characteristics property (default). ‘unknown’ ‘bt709’ BT 601, BT 709, BT 2020 ‘smpte2084’ SMPTE ST 2084 ‘arib-std-b67’ ARIB STD-B67 matrix\_coefficients Set the matrix coefficient. Available values are: ‘auto’ Keep the same colorspace property (default). ‘unknown’ ‘bt709’ ‘smpte170m’ BT 601 ‘bt2020nc’ Set Rec709 colorspace for each frame of the file ffmpeg -i INPUT -c copy -bsf:v prores\_metadata=color\_primaries=bt709:color\_trc=bt709:colorspace=bt709 output.mov Set Hybrid Log-Gamma parameters for each frame of the file ffmpeg -i INPUT -c copy -bsf:v prores\_metadata=color\_primaries=bt2020:color\_trc=arib-std-b67:colorspace=bt2020nc output.mov ### 18.28 remove\_extra Remove extradata from packets. It accepts the following parameter: freq Set which frame types to remove extradata from. ‘k’ Remove extradata from non-keyframes only. ‘keyframe’ Remove extradata from keyframes only. ‘e, all’ Remove extradata from all frames. ### 18.29 setts Set PTS and DTS in packets. It accepts the following parameters: ts pts dts Set expressions for PTS, DTS or both. duration Set expression for duration. time\_base Set output time base. The expressions are evaluated through the eval API and can contain the following constants: N The count of the input packet. Starting from 0. TS The demux timestamp in input in case of `ts` or `dts` option or presentation timestamp in case of `pts` option. POS The original position in the file of the packet, or undefined if undefined for the current packet DTS The demux timestamp in input. PTS The presentation timestamp in input. DURATION The duration in input. STARTDTS The DTS of the first packet. STARTPTS The PTS of the first packet. PREV\_INDTS The previous input DTS. PREV\_INPTS The previous input PTS. PREV\_INDURATION The previous input duration. PREV\_OUTDTS The previous output DTS. PREV\_OUTPTS The previous output PTS. PREV\_OUTDURATION The previous output duration. NEXT\_DTS The next input DTS. NEXT\_PTS The next input PTS. NEXT\_DURATION The next input duration. TB The timebase of stream packet belongs. TB\_OUT The output timebase. SR The sample rate of stream packet belongs. NOPTS The AV\_NOPTS\_VALUE constant. For example, to set PTS equal to DTS (not recommended if B-frames are involved): ffmpeg -i INPUT -c:a copy -bsf:a setts=pts=DTS out.mkv ### 18.30 showinfo Log basic packet information. Mainly useful for testing, debugging, and development. ### 18.31 text2movsub Convert text subtitles to MOV subtitles (as used by the `mov_text` codec) with metadata headers. See also the mov2textsub filter. ### 18.32 trace\_headers Log trace output containing all syntax elements in the coded stream headers (everything above the level of individual coded blocks). This can be useful for debugging low-level stream issues. Supports AV1, H.264, H.265, (M)JPEG, MPEG-2 and VP9, but depending on the build only a subset of these may be available. ### 18.33 truehd\_core Extract the core from a TrueHD stream, dropping ATMOS data. ### 18.34 vp9\_metadata Modify metadata embedded in a VP9 stream. color\_space Set the color space value in the frame header. Note that any frame set to RGB will be implicitly set to PC range and that RGB is incompatible with profiles 0 and 2. ‘unknown’ ‘bt601’ ‘bt709’ ‘smpte170’ ‘smpte240’ ‘bt2020’ ‘rgb’ color\_range Set the color range value in the frame header. Note that any value imposed by the color space will take precedence over this value. ‘tv’ ‘pc’ ### 18.35 vp9\_superframe Merge VP9 invisible (alt-ref) frames back into VP9 superframes. This fixes merging of split/segmented VP9 streams where the alt-ref frame was split from its visible counterpart. ### 18.36 vp9\_superframe\_split Split VP9 superframes into single frames. ### 18.37 vp9\_raw\_reorder Given a VP9 stream with correct timestamps but possibly out of order, insert additional show-existing-frame packets to correct the ordering. ## 19 Format Options The libavformat library provides some generic global options, which can be set on all the muxers and demuxers. In addition each muxer or demuxer may support so-called private options, which are specific for that component. Options may be set by specifying -option value in the FFmpeg tools, or by setting the value explicitly in the `AVFormatContext` options or using the libavutil/opt.h API for programmatic use. The list of supported options follows: avioflags flags (_input/output_) Possible values: ‘direct’ Reduce buffering. probesize integer (_input_) Set probing size in bytes, i.e. the size of the data to analyze to get stream information. A higher value will enable detecting more information in case it is dispersed into the stream, but will increase latency. Must be an integer not lesser than 32. It is 5000000 by default. max\_probe\_packets integer (_input_) Set the maximum number of buffered packets when probing a codec. Default is 2500 packets. packetsize integer (_output_) Set packet size. fflags flags Set format flags. Some are implemented for a limited number of formats. Possible values for input files: ‘discardcorrupt’ Discard corrupted packets. ‘fastseek’ Enable fast, but inaccurate seeks for some formats. ‘genpts’ Generate missing PTS if DTS is present. ‘igndts’ Ignore DTS if PTS is also set. In case the PTS is set, the DTS value is set to NOPTS. This is ignored when the `nofillin` flag is set. ‘ignidx’ Ignore index. ‘nobuffer’ Reduce the latency introduced by buffering during initial input streams analysis. ‘nofillin’ Do not fill in missing values in packet fields that can be exactly calculated. ‘noparse’ Disable AVParsers, this needs `+nofillin` too. ‘sortdts’ Try to interleave output packets by DTS. At present, available only for AVIs with an index. Possible values for output files: ‘autobsf’ Automatically apply bitstream filters as required by the output format. Enabled by default. ‘bitexact’ Only write platform-, build- and time-independent data. This ensures that file and data checksums are reproducible and match between platforms. Its primary use is for regression testing. ‘flush\_packets’ Write out packets immediately. ‘shortest’ Stop muxing at the end of the shortest stream. It may be needed to increase max\_interleave\_delta to avoid flushing the longer streams before EOF. seek2any integer (_input_) Allow seeking to non-keyframes on demuxer level when supported if set to 1. Default is 0. analyzeduration integer (_input_) Specify how many microseconds are analyzed to probe the input. A higher value will enable detecting more accurate information, but will increase latency. It defaults to 5,000,000 microseconds = 5 seconds. cryptokey hexadecimal string (_input_) Set decryption key. indexmem integer (_input_) Set max memory used for timestamp index (per stream). rtbufsize integer (_input_) Set max memory used for buffering real-time frames. fdebug flags (_input/output_) Print specific debug info. Possible values: ‘ts’ max\_delay integer (_input/output_) Set maximum muxing or demuxing delay in microseconds. fpsprobesize integer (_input_) Set number of frames used to probe fps. audio\_preload integer (_output_) Set microseconds by which audio packets should be interleaved earlier. chunk\_duration integer (_output_) Set microseconds for each chunk. chunk\_size integer (_output_) Set size in bytes for each chunk. err\_detect, f\_err\_detect flags (_input_) Set error detection flags. `f_err_detect` is deprecated and should be used only via the `ffmpeg` tool. Possible values: ‘crccheck’ Verify embedded CRCs. ‘bitstream’ Detect bitstream specification deviations. ‘buffer’ Detect improper bitstream length. ‘explode’ Abort decoding on minor error detection. ‘careful’ Consider things that violate the spec and have not been seen in the wild as errors. ‘compliant’ Consider all spec non compliancies as errors. ‘aggressive’ Consider things that a sane encoder should not do as an error. max\_interleave\_delta integer (_output_) Set maximum buffering duration for interleaving. The duration is expressed in microseconds, and defaults to 10000000 (10 seconds). To ensure all the streams are interleaved correctly, libavformat will wait until it has at least one packet for each stream before actually writing any packets to the output file. When some streams are "sparse" (i.e. there are large gaps between successive packets), this can result in excessive buffering. This field specifies the maximum difference between the timestamps of the first and the last packet in the muxing queue, above which libavformat will output a packet regardless of whether it has queued a packet for all the streams. If set to 0, libavformat will continue buffering packets until it has a packet for each stream, regardless of the maximum timestamp difference between the buffered packets. use\_wallclock\_as\_timestamps integer (_input_) Use wallclock as timestamps if set to 1. Default is 0. avoid\_negative\_ts integer (_output_) Possible values: ‘make\_non\_negative’ Shift timestamps to make them non-negative. Also note that this affects only leading negative timestamps, and not non-monotonic negative timestamps. ‘make\_zero’ Shift timestamps so that the first timestamp is 0. ‘auto (default)’ Enables shifting when required by the target format. ‘disabled’ Disables shifting of timestamp. When shifting is enabled, all output timestamps are shifted by the same amount. Audio, video, and subtitles desynching and relative timestamp differences are preserved compared to how they would have been without shifting. skip\_initial\_bytes integer (_input_) Set number of bytes to skip before reading header and frames if set to 1. Default is 0. correct\_ts\_overflow integer (_input_) Correct single timestamp overflows if set to 1. Default is 1. flush\_packets integer (_output_) Flush the underlying I/O stream after each packet. Default is -1 (auto), which means that the underlying protocol will decide, 1 enables it, and has the effect of reducing the latency, 0 disables it and may increase IO throughput in some cases. output\_ts\_offset offset (_output_) Set the output time offset. offset must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. The offset is added by the muxer to the output timestamps. Specifying a positive offset means that the corresponding streams are delayed bt the time duration specified in offset. Default value is `0` (meaning that no offset is applied). format\_whitelist list (_input_) "," separated list of allowed demuxers. By default all are allowed. dump\_separator string (_input_) Separator used to separate the fields printed on the command line about the Stream parameters. For example, to separate the fields with newlines and indentation: ffprobe -dump\_separator " " -i ~/videos/matrixbench\_mpeg2.mpg max\_streams integer (_input_) Specifies the maximum number of streams. This can be used to reject files that would require too many resources due to a large number of streams. skip\_estimate\_duration\_from\_pts bool (_input_) Skip estimation of input duration if it requires an additional probing for PTS at end of file. At present, applicable for MPEG-PS and MPEG-TS. duration\_probesize integer (_input_) Set probing size, in bytes, for input duration estimation when it actually requires an additional probing for PTS at end of file (at present: MPEG-PS and MPEG-TS). It is aimed at users interested in better durations probing for itself, or indirectly because using the concat demuxer, for example. The typical use case is an MPEG-TS CBR with a high bitrate, high video buffering and ending cleaning with similar PTS for video and audio: in such a scenario, the large physical gap between the last video packet and the last audio packet makes it necessary to read many bytes in order to get the video stream duration. Another use case is where the default probing behaviour only reaches a single video frame which is not the last one of the stream due to frame reordering, so the duration is not accurate. Setting this option has a performance impact even for small files because the probing size is fixed. Default behaviour is a general purpose trade-off, largely adaptive, but the probing size will not be extended to get streams durations at all costs. Must be an integer not lesser than 1, or 0 for default behaviour. strict, f\_strict integer (_input/output_) Specify how strictly to follow the standards. `f_strict` is deprecated and should be used only via the `ffmpeg` tool. Possible values: ‘very’ strictly conform to an older more strict version of the spec or reference software ‘strict’ strictly conform to all the things in the spec no matter what consequences ‘normal’ ‘unofficial’ allow unofficial extensions ‘experimental’ allow non standardized experimental things, experimental (unfinished/work in progress/not well tested) decoders and encoders. Note: experimental decoders can pose a security risk, do not use this for decoding untrusted input. ### 19.1 Format stream specifiers Format stream specifiers allow selection of one or more streams that match specific properties. The exact semantics of stream specifiers is defined by the `avformat_match_stream_specifier()` function declared in the libavformat/avformat.h header and documented in the (ffmpeg)Stream specifiers section in the ffmpeg(1) manual. ## 20 Demuxers Demuxers are configured elements in FFmpeg that can read the multimedia streams from a particular type of file. When you configure your FFmpeg build, all the supported demuxers are enabled by default. You can list all available ones using the configure option `--list-demuxers`. You can disable all the demuxers using the configure option `--disable-demuxers`, and selectively enable a single demuxer with the option `--enable-demuxer=DEMUXER`, or disable it with the option `--disable-demuxer=DEMUXER`. The option `-demuxers` of the ff\* tools will display the list of enabled demuxers. Use `-formats` to view a combined list of enabled demuxers and muxers. The description of some of the currently available demuxers follows. ### 20.1 aa Audible Format 2, 3, and 4 demuxer. This demuxer is used to demux Audible Format 2, 3, and 4 (.aa) files. ### 20.2 aac Raw Audio Data Transport Stream AAC demuxer. This demuxer is used to demux an ADTS input containing a single AAC stream alongwith any ID3v1/2 or APE tags in it. ### 20.3 apng Animated Portable Network Graphics demuxer. This demuxer is used to demux APNG files. All headers, but the PNG signature, up to (but not including) the first fcTL chunk are transmitted as extradata. Frames are then split as being all the chunks between two fcTL ones, or between the last fcTL and IEND chunks. \-ignore\_loop bool Ignore the loop variable in the file if set. Default is enabled. \-max\_fps int Maximum framerate in frames per second. Default of 0 imposes no limit. \-default\_fps int Default framerate in frames per second when none is specified in the file (0 meaning as fast as possible). Default is 15. ### 20.4 asf Advanced Systems Format demuxer. This demuxer is used to demux ASF files and MMS network streams. \-no\_resync\_search bool Do not try to resynchronize by looking for a certain optional start code. ### 20.5 concat Virtual concatenation script demuxer. This demuxer reads a list of files and other directives from a text file and demuxes them one after the other, as if all their packets had been muxed together. The timestamps in the files are adjusted so that the first file starts at 0 and each next file starts where the previous one finishes. Note that it is done globally and may cause gaps if all streams do not have exactly the same length. All files must have the same streams (same codecs, same time base, etc.). The duration of each file is used to adjust the timestamps of the next file: if the duration is incorrect (because it was computed using the bit-rate or because the file is truncated, for example), it can cause artifacts. The `duration` directive can be used to override the duration stored in each file. #### 20.5.1 Syntax The script is a text file in extended-ASCII, with one directive per line. Empty lines, leading spaces and lines starting with ’#’ are ignored. The following directive is recognized: `file path` Path to a file to read; special characters and spaces must be escaped with backslash or single quotes. All subsequent file-related directives apply to that file. `ffconcat version 1.0` Identify the script type and version. To make FFmpeg recognize the format automatically, this directive must appear exactly as is (no extra space or byte-order-mark) on the very first line of the script. `duration dur` Duration of the file. This information can be specified from the file; specifying it here may be more efficient or help if the information from the file is not available or accurate. If the duration is set for all files, then it is possible to seek in the whole concatenated video. `inpoint timestamp` In point of the file. When the demuxer opens the file it instantly seeks to the specified timestamp. Seeking is done so that all streams can be presented successfully at In point. This directive works best with intra frame codecs, because for non-intra frame ones you will usually get extra packets before the actual In point and the decoded content will most likely contain frames before In point too. For each file, packets before the file In point will have timestamps less than the calculated start timestamp of the file (negative in case of the first file), and the duration of the files (if not specified by the `duration` directive) will be reduced based on their specified In point. Because of potential packets before the specified In point, packet timestamps may overlap between two concatenated files. `outpoint timestamp` Out point of the file. When the demuxer reaches the specified decoding timestamp in any of the streams, it handles it as an end of file condition and skips the current and all the remaining packets from all streams. Out point is exclusive, which means that the demuxer will not output packets with a decoding timestamp greater or equal to Out point. This directive works best with intra frame codecs and formats where all streams are tightly interleaved. For non-intra frame codecs you will usually get additional packets with presentation timestamp after Out point therefore the decoded content will most likely contain frames after Out point too. If your streams are not tightly interleaved you may not get all the packets from all streams before Out point and you may only will be able to decode the earliest stream until Out point. The duration of the files (if not specified by the `duration` directive) will be reduced based on their specified Out point. `file_packet_metadata key=value` Metadata of the packets of the file. The specified metadata will be set for each file packet. You can specify this directive multiple times to add multiple metadata entries. This directive is deprecated, use `file_packet_meta` instead. `file_packet_meta key value` Metadata of the packets of the file. The specified metadata will be set for each file packet. You can specify this directive multiple times to add multiple metadata entries. `option key value` Option to access, open and probe the file. Can be present multiple times. `stream` Introduce a stream in the virtual file. All subsequent stream-related directives apply to the last introduced stream. Some streams properties must be set in order to allow identifying the matching streams in the subfiles. If no streams are defined in the script, the streams from the first file are copied. `exact_stream_id id` Set the id of the stream. If this directive is given, the string with the corresponding id in the subfiles will be used. This is especially useful for MPEG-PS (VOB) files, where the order of the streams is not reliable. `stream_meta key value` Metadata for the stream. Can be present multiple times. `stream_codec value` Codec for the stream. `stream_extradata hex_string` Extradata for the string, encoded in hexadecimal. `chapter id start end` Add a chapter. id is an unique identifier, possibly small and consecutive. #### 20.5.2 Options This demuxer accepts the following option: safe If set to 1, reject unsafe file paths and directives. A file path is considered safe if it does not contain a protocol specification and is relative and all components only contain characters from the portable character set (letters, digits, period, underscore and hyphen) and have no period at the beginning of a component. If set to 0, any file name is accepted. The default is 1. auto\_convert If set to 1, try to perform automatic conversions on packet data to make the streams concatenable. The default is 1. Currently, the only conversion is adding the h264\_mp4toannexb bitstream filter to H.264 streams in MP4 format. This is necessary in particular if there are resolution changes. segment\_time\_metadata If set to 1, every packet will contain the lavf.concat.start\_time and the lavf.concat.duration packet metadata values which are the start\_time and the duration of the respective file segments in the concatenated output expressed in microseconds. The duration metadata is only set if it is known based on the concat file. The default is 0. #### 20.5.3 Examples * Use absolute filenames and include some comments: \# my first filename file /mnt/share/file-1.wav # my second filename including whitespace file '/mnt/share/file 2.wav' # my third filename including whitespace plus single quote file '/mnt/share/file 3'\\''.wav' * Allow for input format auto-probing, use safe filenames and set the duration of the first file: ffconcat version 1.0 file file-1.wav duration 20.0 file subdir/file-2.wav ### 20.6 dash Dynamic Adaptive Streaming over HTTP demuxer. This demuxer presents all AVStreams found in the manifest. By setting the discard flags on AVStreams the caller can decide which streams to actually receive. Each stream mirrors the `id` and `bandwidth` properties from the `<Representation>` as metadata keys named "id" and "variant\_bitrate" respectively. #### 20.6.1 Options This demuxer accepts the following option: cenc\_decryption\_key 16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7). ### 20.7 dvdvideo DVD-Video demuxer, powered by libdvdnav and libdvdread. Can directly ingest DVD titles, specifically sequential PGCs, into a conversion pipeline. Menu assets, such as background video or audio, can also be demuxed given the menu’s coordinates (at best effort). Block devices (DVD drives), ISO files, and directory structures are accepted. Activate with `-f dvdvideo` in front of one of these inputs. This demuxer does NOT have decryption code of any kind. You are on your own working with encrypted DVDs, and should not expect support on the matter. Underlying playback is handled by libdvdnav, and structure parsing by libdvdread. FFmpeg must be built with GPL library support available as well as the configure switches `--enable-libdvdnav` and `--enable-libdvdread`. You will need to provide either the desired "title number" or exact PGC/PG coordinates. Many open-source DVD players and tools can aid in providing this information. If not specified, the demuxer will default to title 1 which works for many discs. However, due to the flexibility of the format, it is recommended to check manually. There are many discs that are authored strangely or with invalid headers. If the input is a real DVD drive, please note that there are some drives which may silently fail on reading bad sectors from the disc, returning random bits instead which is effectively corrupt data. This is especially prominent on aging or rotting discs. A second pass and integrity checks would be needed to detect the corruption. This is not an FFmpeg issue. #### 20.7.1 Background DVD-Video is not a directly accessible, linear container format in the traditional sense. Instead, it allows for complex and programmatic playback of carefully muxed MPEG-PS streams that are stored in headerless VOB files. To the end-user, these streams are known simply as "titles", but the actual logical playback sequence is defined by one or more "PGCs", or Program Group Chains, within the title. The PGC is in turn comprised of multiple "PGs", or Programs", which are the actual video segments (and for a typical video feature, sequentially ordered). The PGC structure, along with stream layout and metadata, are stored in IFO files that need to be parsed. PGCs can be thought of as playlists in easier terms. An actual DVD player relies on user GUI interaction via menus and an internal VM to drive the direction of demuxing. Generally, the user would either navigate (via menus) or automatically be redirected to the PGC of their choice. During this process and the subsequent playback, the DVD player’s internal VM also maintains a state and executes instructions that can create jumps to different sectors during playback. This is why libdvdnav is involved, as a linear read of the MPEG-PS blobs on the disc (VOBs) is not enough to produce the right sequence in many cases. There are many other DVD structures (a long subject) that will not be discussed here. NAV packets, in particular, are handled by this demuxer to build accurate timing but not emitted as a stream. For a good high-level understanding, refer to: https://code.videolan.org/videolan/libdvdnav/-/blob/master/doc/dvd\_structures #### 20.7.2 Options This demuxer accepts the following options: title int The title number to play. Must be set if pgc and pg are not set. Not applicable to menus. Default is 0 (auto), which currently only selects the first available title (title 1) and notifies the user about the implications. chapter\_start int The chapter, or PTT (part-of-title), number to start at. Not applicable to menus. Default is 1. chapter\_end int The chapter, or PTT (part-of-title), number to end at. Not applicable to menus. Default is 0, which is a special value to signal end at the last possible chapter. angle int The video angle number, referring to what is essentially an additional video stream that is composed from alternate frames interleaved in the VOBs. Not applicable to menus. Default is 1. region int The region code to use for playback. Some discs may use this to default playback at a particular angle in different regions. This option will not affect the region code of a real DVD drive, if used as an input. Not applicable to menus. Default is 0, "world". menu bool Demux menu assets instead of navigating a title. Requires exact coordinates of the menu (menu\_lu, menu\_vts, pgc, pg). Default is false. menu\_lu int The menu language to demux. In DVD, menus are grouped by language. Default is 1, the first language unit. menu\_vts int The VTS where the menu lives, or 0 if it is a VMG menu (root-level). Default is 1, menu of the first VTS. pgc int The entry PGC to start playback, in conjunction with pg. Alternative to setting title. Chapter markers are not supported at this time. Must be explicitly set for menus. Default is 0, automatically resolve from value of title. pg int The entry PG to start playback, in conjunction with pgc. Alternative to setting title. Chapter markers are not supported at this time. Default is 1, the first PG of the PGC. preindex bool Enable this to have accurate chapter (PTT) markers and duration measurement, which requires a slow second pass read in order to index the chapter marker timestamps from NAV packets. This is non-ideal extra work for real optical drives. It is recommended and faster to use this option with a backup of the DVD structure stored on a hard drive. Not compatible with pgc and pg. Default is 0, false. trim bool Skip padding cells (i.e. cells shorter than 1 second) from the beginning. There exist many discs with filler segments at the beginning of the PGC, often with junk data intended for controlling a real DVD player’s buffering speed and with no other material data value. Not applicable to menus. Default is 1, true. #### 20.7.3 Examples * Open title 3 from a given DVD structure: ffmpeg -f dvdvideo -title 3 -i <path to DVD> ... * Open chapters 3-6 from title 1 from a given DVD structure: ffmpeg -f dvdvideo -chapter\_start 3 -chapter\_end 6 -title 1 -i <path to DVD> ... * Open only chapter 5 from title 1 from a given DVD structure: ffmpeg -f dvdvideo -chapter\_start 5 -chapter\_end 5 -title 1 -i <path to DVD> ... * Demux menu with language 1 from VTS 1, PGC 1, starting at PG 1: ffmpeg -f dvdvideo -menu 1 -menu\_lu 1 -menu\_vts 1 -pgc 1 -pg 1 -i <path to DVD> ... ### 20.8 ea Electronic Arts Multimedia format demuxer. This format is used by various Electronic Arts games. #### 20.8.1 Options merge\_alpha bool Normally the VP6 alpha channel (if exists) is returned as a secondary video stream, by setting this option you can make the demuxer return a single video stream which contains the alpha channel in addition to the ordinary video. ### 20.9 imf Interoperable Master Format demuxer. This demuxer presents audio and video streams found in an IMF Composition, as specified in SMPTE ST 2067-2. ffmpeg \[-assetmaps <path of ASSETMAP1>,<path of ASSETMAP2>,...\] -i <path of CPL> ... If `-assetmaps` is not specified, the demuxer looks for a file called ASSETMAP.xml in the same directory as the CPL. ### 20.10 flv, live\_flv, kux Adobe Flash Video Format demuxer. This demuxer is used to demux FLV files and RTMP network streams. In case of live network streams, if you force format, you may use live\_flv option instead of flv to survive timestamp discontinuities. KUX is a flv variant used on the Youku platform. ffmpeg -f flv -i myfile.flv ... ffmpeg -f live\_flv -i rtmp://<any.server>/anything/key .... \-flv\_metadata bool Allocate the streams according to the onMetaData array content. \-flv\_ignore\_prevtag bool Ignore the size of previous tag value. \-flv\_full\_metadata bool Output all context of the onMetadata. ### 20.11 gif Animated GIF demuxer. It accepts the following options: min\_delay Set the minimum valid delay between frames in hundredths of seconds. Range is 0 to 6000. Default value is 2. max\_gif\_delay Set the maximum valid delay between frames in hundredth of seconds. Range is 0 to 65535. Default value is 65535 (nearly eleven minutes), the maximum value allowed by the specification. default\_delay Set the default delay between frames in hundredths of seconds. Range is 0 to 6000. Default value is 10. ignore\_loop GIF files can contain information to loop a certain number of times (or infinitely). If ignore\_loop is set to 1, then the loop setting from the input will be ignored and looping will not occur. If set to 0, then looping will occur and will cycle the number of times according to the GIF. Default value is 1. For example, with the overlay filter, place an infinitely looping GIF over another video: ffmpeg -i input.mp4 -ignore\_loop 0 -i input.gif -filter\_complex overlay=shortest=1 out.mkv Note that in the above example the shortest option for overlay filter is used to end the output video at the length of the shortest input file, which in this case is input.mp4 as the GIF in this example loops infinitely. ### 20.12 hls HLS demuxer Apple HTTP Live Streaming demuxer. This demuxer presents all AVStreams from all variant streams. The id field is set to the bitrate variant index number. By setting the discard flags on AVStreams (by pressing ’a’ or ’v’ in ffplay), the caller can decide which variant streams to actually receive. The total bitrate of the variant that the stream belongs to is available in a metadata key named "variant\_bitrate". It accepts the following options: live\_start\_index segment index to start live streams at (negative values are from the end). prefer\_x\_start prefer to use #EXT-X-START if it’s in playlist instead of live\_start\_index. allowed\_extensions ’,’ separated list of file extensions that hls is allowed to access. extension\_picky This blocks disallowed extensions from probing It also requires all available segments to have matching extensions to the format except mpegts, which is always allowed. It is recommended to set the whitelists correctly instead of depending on extensions Enabled by default. max\_reload Maximum number of times a insufficient list is attempted to be reloaded. Default value is 1000. m3u8\_hold\_counters The maximum number of times to load m3u8 when it refreshes without new segments. Default value is 1000. http\_persistent Use persistent HTTP connections. Applicable only for HTTP streams. Enabled by default. http\_multiple Use multiple HTTP connections for downloading HTTP segments. Enabled by default for HTTP/1.1 servers. http\_seekable Use HTTP partial requests for downloading HTTP segments. 0 = disable, 1 = enable, -1 = auto, Default is auto. seg\_format\_options Set options for the demuxer of media segments using a list of key=value pairs separated by `:`. seg\_max\_retry Maximum number of times to reload a segment on error, useful when segment skip on network error is not desired. Default value is 0. ### 20.13 image2 Image file demuxer. This demuxer reads from a list of image files specified by a pattern. The syntax and meaning of the pattern is specified by the option pattern\_type. The pattern may contain a suffix which is used to automatically determine the format of the images contained in the files. The size, the pixel format, and the format of each image must be the same for all the files in the sequence. This demuxer accepts the following options: framerate Set the frame rate for the video stream. It defaults to 25. loop If set to 1, loop over the input. Default value is 0. pattern\_type Select the pattern type used to interpret the provided filename. pattern\_type accepts one of the following values. none Disable pattern matching, therefore the video will only contain the specified image. You should use this option if you do not want to create sequences from multiple images and your filenames may contain special pattern characters. sequence Select a sequence pattern type, used to specify a sequence of files indexed by sequential numbers. A sequence pattern may contain the string "%d" or "%0Nd", which specifies the position of the characters representing a sequential number in each filename matched by the pattern. If the form "%d0Nd" is used, the string representing the number in each filename is 0-padded and N is the total number of 0-padded digits representing the number. The literal character ’%’ can be specified in the pattern with the string "%%". If the sequence pattern contains "%d" or "%0Nd", the first filename of the file list specified by the pattern must contain a number inclusively contained between start\_number and start\_number+start\_number\_range\-1, and all the following numbers must be sequential. For example the pattern "img-%03d.bmp" will match a sequence of filenames of the form img-001.bmp, img-002.bmp, ..., img-010.bmp, etc.; the pattern "i%%m%%g-%d.jpg" will match a sequence of filenames of the form i%m%g-1.jpg, i%m%g-2.jpg, ..., i%m%g-10.jpg, etc. Note that the pattern must not necessarily contain "%d" or "%0Nd", for example to convert a single image file img.jpeg you can employ the command: ffmpeg -i img.jpeg img.png glob Select a glob wildcard pattern type. The pattern is interpreted like a `glob()` pattern. This is only selectable if libavformat was compiled with globbing support. glob\_sequence _(deprecated, will be removed)_ Select a mixed glob wildcard/sequence pattern. If your version of libavformat was compiled with globbing support, and the provided pattern contains at least one glob meta character among `%*?[]{}` that is preceded by an unescaped "%", the pattern is interpreted like a `glob()` pattern, otherwise it is interpreted like a sequence pattern. All glob special characters `%*?[]{}` must be prefixed with "%". To escape a literal "%" you shall use "%%". For example the pattern `foo-%*.jpeg` will match all the filenames prefixed by "foo-" and terminating with ".jpeg", and `foo-%?%?%?.jpeg` will match all the filenames prefixed with "foo-", followed by a sequence of three characters, and terminating with ".jpeg". This pattern type is deprecated in favor of glob and sequence. Default value is glob\_sequence. pixel\_format Set the pixel format of the images to read. If not specified the pixel format is guessed from the first image file in the sequence. start\_number Set the index of the file matched by the image file pattern to start to read from. Default value is 0. start\_number\_range Set the index interval range to check when looking for the first image file in the sequence, starting from start\_number. Default value is 5. ts\_from\_file If set to 1, will set frame timestamp to modification time of image file. Note that monotonity of timestamps is not provided: images go in the same order as without this option. Default value is 0. If set to 2, will set frame timestamp to the modification time of the image file in nanosecond precision. video\_size Set the video size of the images to read. If not specified the video size is guessed from the first image file in the sequence. export\_path\_metadata If set to 1, will add two extra fields to the metadata found in input, making them also available for other filters (see drawtext filter for examples). Default value is 0. The extra fields are described below: lavf.image2dec.source\_path Corresponds to the full path to the input file being read. lavf.image2dec.source\_basename Corresponds to the name of the file being read. #### 20.13.1 Examples * Use `ffmpeg` for creating a video from the images in the file sequence img-001.jpeg, img-002.jpeg, ..., assuming an input frame rate of 10 frames per second: ffmpeg -framerate 10 -i 'img-%03d.jpeg' out.mkv * As above, but start by reading from a file with index 100 in the sequence: ffmpeg -framerate 10 -start\_number 100 -i 'img-%03d.jpeg' out.mkv * Read images matching the "\*.png" glob pattern , that is all the files terminating with the ".png" suffix: ffmpeg -framerate 10 -pattern\_type glob -i "\*.png" out.mkv ### 20.14 libgme The Game Music Emu library is a collection of video game music file emulators. See https://bitbucket.org/mpyne/game-music-emu/overview for more information. It accepts the following options: track\_index Set the index of which track to demux. The demuxer can only export one track. Track indexes start at 0. Default is to pick the first track. Number of tracks is exported as tracks metadata entry. sample\_rate Set the sampling rate of the exported track. Range is 1000 to 999999. Default is 44100. max\_size _(bytes)_ The demuxer buffers the entire file into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of files that can be read. Default is 50 MiB. ### 20.15 libmodplug ModPlug based module demuxer See https://github.com/Konstanty/libmodplug It will export one 2-channel 16-bit 44.1 kHz audio stream. Optionally, a `pal8` 16-color video stream can be exported with or without printed metadata. It accepts the following options: noise\_reduction Apply a simple low-pass filter. Can be 1 (on) or 0 (off). Default is 0. reverb\_depth Set amount of reverb. Range 0-100. Default is 0. reverb\_delay Set delay in ms, clamped to 40-250 ms. Default is 0. bass\_amount Apply bass expansion a.k.a. XBass or megabass. Range is 0 (quiet) to 100 (loud). Default is 0. bass\_range Set cutoff i.e. upper-bound for bass frequencies. Range is 10-100 Hz. Default is 0. surround\_depth Apply a Dolby Pro-Logic surround effect. Range is 0 (quiet) to 100 (heavy). Default is 0. surround\_delay Set surround delay in ms, clamped to 5-40 ms. Default is 0. max\_size The demuxer buffers the entire file into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of files that can be read. Range is 0 to 100 MiB. 0 removes buffer size limit (not recommended). Default is 5 MiB. video\_stream\_expr String which is evaluated using the eval API to assign colors to the generated video stream. Variables which can be used are `x`, `y`, `w`, `h`, `t`, `speed`, `tempo`, `order`, `pattern` and `row`. video\_stream Generate video stream. Can be 1 (on) or 0 (off). Default is 0. video\_stream\_w Set video frame width in ’chars’ where one char indicates 8 pixels. Range is 20-512. Default is 30. video\_stream\_h Set video frame height in ’chars’ where one char indicates 8 pixels. Range is 20-512. Default is 30. video\_stream\_ptxt Print metadata on video stream. Includes `speed`, `tempo`, `order`, `pattern`, `row` and `ts` (time in ms). Can be 1 (on) or 0 (off). Default is 1. ### 20.16 libopenmpt libopenmpt based module demuxer See https://lib.openmpt.org/libopenmpt/ for more information. Some files have multiple subsongs (tracks) this can be set with the subsong option. It accepts the following options: subsong Set the subsong index. This can be either ’all’, ’auto’, or the index of the subsong. Subsong indexes start at 0. The default is ’auto’. The default value is to let libopenmpt choose. layout Set the channel layout. Valid values are 1, 2, and 4 channel layouts. The default value is STEREO. sample\_rate Set the sample rate for libopenmpt to output. Range is from 1000 to INT\_MAX. The value default is 48000. ### 20.17 mov/mp4/3gp Demuxer for Quicktime File Format & ISO/IEC Base Media File Format (ISO/IEC 14496-12 or MPEG-4 Part 12, ISO/IEC 15444-12 or JPEG 2000 Part 12). Registered extensions: mov, mp4, m4a, 3gp, 3g2, mj2, psp, m4b, ism, ismv, isma, f4v #### 20.17.1 Options This demuxer accepts the following options: enable\_drefs Enable loading of external tracks, disabled by default. Enabling this can theoretically leak information in some use cases. use\_absolute\_path Allows loading of external tracks via absolute paths, disabled by default. Enabling this poses a security risk. It should only be enabled if the source is known to be non-malicious. seek\_streams\_individually When seeking, identify the closest point in each stream individually and demux packets in that stream from identified point. This can lead to a different sequence of packets compared to demuxing linearly from the beginning. Default is true. ignore\_editlist Ignore any edit list atoms. The demuxer, by default, modifies the stream index to reflect the timeline described by the edit list. Default is false. advanced\_editlist Modify the stream index to reflect the timeline described by the edit list. `ignore_editlist` must be set to false for this option to be effective. If both `ignore_editlist` and this option are set to false, then only the start of the stream index is modified to reflect initial dwell time or starting timestamp described by the edit list. Default is true. ignore\_chapters Don’t parse chapters. This includes GoPro ’HiLight’ tags/moments. Note that chapters are only parsed when input is seekable. Default is false. use\_mfra\_for For seekable fragmented input, set fragment’s starting timestamp from media fragment random access box, if present. Following options are available: ‘auto’ Auto-detect whether to set mfra timestamps as PTS or DTS _(default)_ ‘dts’ Set mfra timestamps as DTS ‘pts’ Set mfra timestamps as PTS ‘0’ Don’t use mfra box to set timestamps use\_tfdt For fragmented input, set fragment’s starting timestamp to `baseMediaDecodeTime` from the `tfdt` box. Default is enabled, which will prefer to use the `tfdt` box to set DTS. Disable to use the `earliest_presentation_time` from the `sidx` box. In either case, the timestamp from the `mfra` box will be used if it’s available and `use_mfra_for` is set to pts or dts. export\_all Export unrecognized boxes within the udta box as metadata entries. The first four characters of the box type are set as the key. Default is false. export\_xmp Export entire contents of XMP\_ box and uuid box as a string with key `xmp`. Note that if `export_all` is set and this option isn’t, the contents of XMP\_ box are still exported but with key `XMP_`. Default is false. activation\_bytes 4-byte key required to decrypt Audible AAX and AAX+ files. See Audible AAX subsection below. audible\_fixed\_key Fixed key used for handling Audible AAX/AAX+ files. It has been pre-set so should not be necessary to specify. decryption\_key 16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7). max\_stts\_delta Very high sample deltas written in a trak’s stts box may occasionally be intended but usually they are written in error or used to store a negative value for dts correction when treated as signed 32-bit integers. This option lets the user set an upper limit, beyond which the delta is clamped to 1. Values greater than the limit if negative when cast to int32 are used to adjust onward dts. Unit is the track time scale. Range is 0 to UINT\_MAX. Default is `UINT_MAX - 48000*10` which allows up to a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of `uint32` range. interleaved\_read Interleave packets from multiple tracks at demuxer level. For badly interleaved files, this prevents playback issues caused by large gaps between packets in different tracks, as MOV/MP4 do not have packet placement requirements. However, this can cause excessive seeking on very badly interleaved files, due to seeking between tracks, so disabling it may prevent I/O issues, at the expense of playback. #### 20.17.2 Audible AAX Audible AAX files are encrypted M4B files, and they can be decrypted by specifying a 4 byte activation secret. ffmpeg -activation\_bytes 1CEB00DA -i test.aax -vn -c:a copy output.mp4 ### 20.18 mpegts MPEG-2 transport stream demuxer. This demuxer accepts the following options: resync\_size Set size limit for looking up a new synchronization. Default value is 65536. skip\_unknown\_pmt Skip PMTs for programs not defined in the PAT. Default value is 0. fix\_teletext\_pts Override teletext packet PTS and DTS values with the timestamps calculated from the PCR of the first program which the teletext stream is part of and is not discarded. Default value is 1, set this option to 0 if you want your teletext packet PTS and DTS values untouched. ts\_packetsize Output option carrying the raw packet size in bytes. Show the detected raw packet size, cannot be set by the user. scan\_all\_pmts Scan and combine all PMTs. The value is an integer with value from -1 to 1 (-1 means automatic setting, 1 means enabled, 0 means disabled). Default value is -1. merge\_pmt\_versions Re-use existing streams when a PMT’s version is updated and elementary streams move to different PIDs. Default value is 0. max\_packet\_size Set maximum size, in bytes, of packet emitted by the demuxer. Payloads above this size are split across multiple packets. Range is 1 to INT\_MAX/2. Default is 204800 bytes. ### 20.19 mpjpeg MJPEG encapsulated in multi-part MIME demuxer. This demuxer allows reading of MJPEG, where each frame is represented as a part of multipart/x-mixed-replace stream. strict\_mime\_boundary Default implementation applies a relaxed standard to multi-part MIME boundary detection, to prevent regression with numerous existing endpoints not generating a proper MIME MJPEG stream. Turning this option on by setting it to 1 will result in a stricter check of the boundary value. ### 20.20 rawvideo Raw video demuxer. This demuxer allows one to read raw video data. Since there is no header specifying the assumed video parameters, the user must specify them in order to be able to decode the data correctly. This demuxer accepts the following options: framerate Set input video frame rate. Default value is 25. pixel\_format Set the input video pixel format. Default value is `yuv420p`. video\_size Set the input video size. This value must be specified explicitly. For example to read a rawvideo file input.raw with `ffplay`, assuming a pixel format of `rgb24`, a video size of `320x240`, and a frame rate of 10 images per second, use the command: ffplay -f rawvideo -pixel\_format rgb24 -video\_size 320x240 -framerate 10 input.raw ### 20.21 rcwt RCWT (Raw Captions With Time) is a format native to ccextractor, a commonly used open source tool for processing 608/708 Closed Captions (CC) sources. For more information on the format, see (ffmpeg-formats)rcwtenc. This demuxer implements the specification as of March 2024, which has been stable and unchanged since April 2014. #### 20.21.1 Examples * Render CC to ASS using the built-in decoder: ffmpeg -i CC.rcwt.bin CC.ass Note that if your output appears to be empty, you may have to manually set the decoder’s data\_field option to pick the desired CC substream. * Convert an RCWT backup to Scenarist (SCC) format: ffmpeg -i CC.rcwt.bin -c:s copy CC.scc Note that the SCC format does not support all of the possible CC extensions that can be stored in RCWT (such as EIA-708). ### 20.22 sbg SBaGen script demuxer. This demuxer reads the script language used by SBaGen http://uazu.net/sbagen/ to generate binaural beats sessions. A SBG script looks like that: \-SE a: 300-2.5/3 440+4.5/0 b: 300-2.5/0 440+4.5/3 off: - NOW == a +0:07:00 == b +0:14:00 == a +0:21:00 == b +0:30:00 off A SBG script can mix absolute and relative timestamps. If the script uses either only absolute timestamps (including the script start time) or only relative ones, then its layout is fixed, and the conversion is straightforward. On the other hand, if the script mixes both kind of timestamps, then the NOW reference for relative timestamps will be taken from the current time of day at the time the script is read, and the script layout will be frozen according to that reference. That means that if the script is directly played, the actual times will match the absolute timestamps up to the sound controller’s clock accuracy, but if the user somehow pauses the playback or seeks, all times will be shifted accordingly. ### 20.23 tedcaptions JSON captions used for TED Talks. TED does not provide links to the captions, but they can be guessed from the page. The file tools/bookmarklets.html from the FFmpeg source tree contains a bookmarklet to expose them. This demuxer accepts the following option: start\_time Set the start time of the TED talk, in milliseconds. The default is 15000 (15s). It is used to sync the captions with the downloadable videos, because they include a 15s intro. Example: convert the captions to a format most players understand: ffmpeg -i http://www.ted.com/talks/subtitles/id/1/lang/en talk1-en.srt ### 20.24 vapoursynth Vapoursynth wrapper. Due to security concerns, Vapoursynth scripts will not be autodetected so the input format has to be forced. For ff\* CLI tools, add `-f vapoursynth` before the input `-i yourscript.vpy`. This demuxer accepts the following option: max\_script\_size The demuxer buffers the entire script into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of scripts that can be read. Default is 1 MiB. ### 20.25 w64 Sony Wave64 Audio demuxer. This demuxer accepts the following options: max\_size See the same option for the wav demuxer. ### 20.26 wav RIFF Wave Audio demuxer. This demuxer accepts the following options: max\_size Specify the maximum packet size in bytes for the demuxed packets. By default this is set to 0, which means that a sensible value is chosen based on the input format. ## 21 Muxers Muxers are configured elements in FFmpeg which allow writing multimedia streams to a particular type of file. When you configure your FFmpeg build, all the supported muxers are enabled by default. You can list all available muxers using the configure option `--list-muxers`. You can disable all the muxers with the configure option `--disable-muxers` and selectively enable / disable single muxers with the options `--enable-muxer=MUXER` / `--disable-muxer=MUXER`. The option `-muxers` of the ff\* tools will display the list of enabled muxers. Use `-formats` to view a combined list of enabled demuxers and muxers. A description of some of the currently available muxers follows. ### 21.1 Raw muxers This section covers raw muxers. They accept a single stream matching the designated codec. They do not store timestamps or metadata. The recognized extension is the same as the muxer name unless indicated otherwise. It comprises the following muxers. The media type and the eventual extensions used to automatically selects the muxer from the output extensions are also shown. ‘ac3 _audio_’ Dolby Digital, also known as AC-3. ‘adx _audio_’ CRI Middleware ADX audio. This muxer will write out the total sample count near the start of the first packet when the output is seekable and the count can be stored in 32 bits. ‘aptx _audio_’ aptX (Audio Processing Technology for Bluetooth) ‘aptx\_hd _audio_ (aptxdh)’ aptX HD (Audio Processing Technology for Bluetooth) audio ‘avs2 _video_ (avs, avs2)’ AVS2-P2 (Audio Video Standard - Second generation - Part 2) / IEEE 1857.4 video ‘avs3 _video_ (avs3)’ AVS3-P2 (Audio Video Standard - Third generation - Part 2) / IEEE 1857.10 video ‘cavsvideo _video_ (cavs)’ Chinese AVS (Audio Video Standard - First generation) ‘codec2raw _audio_’ Codec 2 audio. No extension is registered so format name has to be supplied e.g. with the ffmpeg CLI tool `-f codec2raw`. ‘data _any_’ Generic data muxer. This muxer accepts a single stream with any codec of any type. The input stream has to be selected using the `-map` option with the `ffmpeg` CLI tool. No extension is registered so format name has to be supplied e.g. with the `ffmpeg` CLI tool `-f data`. ‘dfpwm _audio_ (dfpwm)’ Raw DFPWM1a (Dynamic Filter Pulse With Modulation) audio muxer. ‘dirac _video_ (drc, vc2)’ BBC Dirac video. The Dirac Pro codec is a subset and is standardized as SMPTE VC-2. ‘dnxhd _video_ (dnxhd, dnxhr)’ Avid DNxHD video. It is standardized as SMPTE VC-3. Accepts DNxHR streams. ‘dts _audio_’ DTS Coherent Acoustics (DCA) audio ‘eac3 _audio_’ Dolby Digital Plus, also known as Enhanced AC-3 ‘evc _video_ (evc)’ MPEG-5 Essential Video Coding (EVC) / EVC / MPEG-5 Part 1 EVC video ‘g722 _audio_’ ITU-T G.722 audio ‘g723\_1 _audio_ (tco, rco)’ ITU-T G.723.1 audio ‘g726 _audio_’ ITU-T G.726 big-endian ("left-justified") audio. No extension is registered so format name has to be supplied e.g. with the `ffmpeg` CLI tool `-f g726`. ‘g726le _audio_’ ITU-T G.726 little-endian ("right-justified") audio. No extension is registered so format name has to be supplied e.g. with the `ffmpeg` CLI tool `-f g726le`. ‘gsm _audio_’ Global System for Mobile Communications audio ‘h261 _video_’ ITU-T H.261 video ‘h263 _video_’ ITU-T H.263 / H.263-1996, H.263+ / H.263-1998 / H.263 version 2 video ‘h264 _video_ (h264, 264)’ ITU-T H.264 / MPEG-4 Part 10 AVC video. Bitstream shall be converted to Annex B syntax if it’s in length-prefixed mode. ‘hevc _video_ (hevc, h265, 265)’ ITU-T H.265 / MPEG-H Part 2 HEVC video. Bitstream shall be converted to Annex B syntax if it’s in length-prefixed mode. ‘m4v _video_’ MPEG-4 Part 2 video ‘mjpeg _video_ (mjpg, mjpeg)’ Motion JPEG video ‘mlp _audio_’ Meridian Lossless Packing, also known as Packed PCM ‘mp2 _audio_ (mp2, m2a, mpa)’ MPEG-1 Audio Layer II audio ‘mpeg1video _video_ (mpg, mpeg, m1v)’ MPEG-1 Part 2 video. ‘mpeg2video _video_ (m2v)’ ITU-T H.262 / MPEG-2 Part 2 video ‘obu _video_’ AV1 low overhead Open Bitstream Units muxer. Temporal delimiter OBUs will be inserted in all temporal units of the stream. ‘rawvideo _video_ (yuv, rgb)’ Raw uncompressed video. ‘sbc _audio_ (sbc, msbc)’ Bluetooth SIG low-complexity subband codec audio ‘truehd _audio_ (thd)’ Dolby TrueHD audio ‘vc1 _video_’ SMPTE 421M / VC-1 video #### 21.1.1 Examples * Store raw video frames with the ‘rawvideo’ muxer using `ffmpeg`: ffmpeg -f lavfi -i testsrc -t 10 -s hd1080p testsrc.yuv Since the rawvideo muxer do not store the information related to size and format, this information must be provided when demuxing the file: ffplay -video\_size 1920x1080 -pixel\_format rgb24 -f rawvideo testsrc.rgb ### 21.2 Raw PCM muxers This section covers raw PCM (Pulse-Code Modulation) audio muxers. They accept a single stream matching the designated codec. They do not store timestamps or metadata. The recognized extension is the same as the muxer name. It comprises the following muxers. The optional additional extension used to automatically select the muxer from the output extension is also shown in parentheses. ‘alaw (al)’ PCM A-law ‘f32be’ PCM 32-bit floating-point big-endian ‘f32le’ PCM 32-bit floating-point little-endian ‘f64be’ PCM 64-bit floating-point big-endian ‘f64le’ PCM 64-bit floating-point little-endian ‘mulaw (ul)’ PCM mu-law ‘s16be’ PCM signed 16-bit big-endian ‘s16le’ PCM signed 16-bit little-endian ‘s24be’ PCM signed 24-bit big-endian ‘s24le’ PCM signed 24-bit little-endian ‘s32be’ PCM signed 32-bit big-endian ‘s32le’ PCM signed 32-bit little-endian ‘s8 (sb)’ PCM signed 8-bit ‘u16be’ PCM unsigned 16-bit big-endian ‘u16le’ PCM unsigned 16-bit little-endian ‘u24be’ PCM unsigned 24-bit big-endian ‘u24le’ PCM unsigned 24-bit little-endian ‘u32be’ PCM unsigned 32-bit big-endian ‘u32le’ PCM unsigned 32-bit little-endian ‘u8 (ub)’ PCM unsigned 8-bit ‘vidc’ PCM Archimedes VIDC ### 21.3 MPEG-1/MPEG-2 program stream muxers This section covers formats belonging to the MPEG-1 and MPEG-2 Systems family. The MPEG-1 Systems format (also known as ISO/IEEC 11172-1 or MPEG-1 program stream) has been adopted for the format of media track stored in VCD (Video Compact Disc). The MPEG-2 Systems standard (also known as ISO/IEEC 13818-1) covers two containers formats, one known as transport stream and one known as program stream; only the latter is covered here. The MPEG-2 program stream format (also known as VOB due to the corresponding file extension) is an extension of MPEG-1 program stream: in addition to support different codecs for the audio and video streams, it also stores subtitles and navigation metadata. MPEG-2 program stream has been adopted for storing media streams in SVCD and DVD storage devices. This section comprises the following muxers. ‘mpeg (mpg,mpeg)’ MPEG-1 Systems / MPEG-1 program stream muxer. ‘vcd’ MPEG-1 Systems / MPEG-1 program stream (VCD) muxer. This muxer can be used to generate tracks in the format accepted by the VCD (Video Compact Disc) storage devices. It is the same as the ‘mpeg’ muxer with a few differences. ‘vob’ MPEG-2 program stream (VOB) muxer. ‘dvd’ MPEG-2 program stream (DVD VOB) muxer. This muxer can be used to generate tracks in the format accepted by the DVD (Digital Versatile Disc) storage devices. This is the same as the ‘vob’ muxer with a few differences. ‘svcd (vob)’ MPEG-2 program stream (SVCD VOB) muxer. This muxer can be used to generate tracks in the format accepted by the SVCD (Super Video Compact Disc) storage devices. This is the same as the ‘vob’ muxer with a few differences. #### 21.3.1 Options muxrate rate Set user-defined mux rate expressed as a number of bits/s. If not specied the automatically computed mux rate is employed. Default value is `0`. preload delay Set initial demux-decode delay in microseconds. Default value is `500000`. ### 21.4 MOV/MPEG-4/ISOMBFF muxers This section covers formats belonging to the QuickTime / MOV family, including the MPEG-4 Part 14 format and ISO base media file format (ISOBMFF). These formats share a common structure based on the ISO base media file format (ISOBMFF). The MOV format was originally developed for use with Apple QuickTime. It was later used as the basis for the MPEG-4 Part 1 (later Part 14) format, also known as ISO/IEC 14496-1. That format was then generalized into ISOBMFF, also named MPEG-4 Part 12 format, ISO/IEC 14496-12, or ISO/IEC 15444-12. It comprises the following muxers. ‘3gp’ Third Generation Partnership Project (3GPP) format for 3G UMTS multimedia services ‘3g2’ Third Generation Partnership Project 2 (3GP2 or 3GPP2) format for 3G CDMA2000 multimedia services, similar to ‘3gp’ with extensions and limitations ‘f4v’ Adobe Flash Video format ‘ipod’ MPEG-4 audio file format, as MOV/MP4 but limited to contain only audio streams, typically played with the Apple ipod device ‘ismv’ Microsoft IIS (Internet Information Services) Smooth Streaming Audio/Video (ISMV or ISMA) format. This is based on MPEG-4 Part 14 format with a few incompatible variants, used to stream media files for the Microsoft IIS server. ‘mov’ QuickTime player format identified by the `.mov` extension ‘mp4’ MP4 or MPEG-4 Part 14 format ‘psp’ PlayStation Portable MP4/MPEG-4 Part 14 format variant. This is based on MPEG-4 Part 14 format with a few incompatible variants, used to play files on PlayStation devices. #### 21.4.1 Fragmentation The ‘mov’, ‘mp4’, and ‘ismv’ muxers support fragmentation. Normally, a MOV/MP4 file has all the metadata about all packets stored in one location. This data is usually written at the end of the file, but it can be moved to the start for better playback by adding `+faststart` to the `-movflags`, or using the `qt-faststart` tool). A fragmented file consists of a number of fragments, where packets and metadata about these packets are stored together. Writing a fragmented file has the advantage that the file is decodable even if the writing is interrupted (while a normal MOV/MP4 is undecodable if it is not properly finished), and it requires less memory when writing very long files (since writing normal MOV/MP4 files stores info about every single packet in memory until the file is closed). The downside is that it is less compatible with other applications. Fragmentation is enabled by setting one of the options that define how to cut the file into fragments: frag\_duration frag\_size min\_frag\_duration movflags +frag\_keyframe movflags +frag\_custom If more than one condition is specified, fragments are cut when one of the specified conditions is fulfilled. The exception to this is the option min\_frag\_duration, which has to be fulfilled for any of the other conditions to apply. #### 21.4.2 Options brand brand\_string Override major brand. empty\_hdlr\_name bool Enable to skip writing the name inside a `hdlr` box. Default is `false`. encryption\_key key set the media encryption key in hexadecimal format encryption\_kid kid set the media encryption key identifier in hexadecimal format encryption\_scheme scheme configure the encryption scheme, allowed values are ‘none’, and ‘cenc-aes-ctr’ frag\_duration duration Create fragments that are duration microseconds long. frag\_interleave number Interleave samples within fragments (max number of consecutive samples, lower is tighter interleaving, but with more overhead. It is set to `0` by default. frag\_size size create fragments that contain up to size bytes of payload data iods\_audio\_profile profile specify iods number for the audio profile atom (from -1 to 255), default is `-1` iods\_video\_profile profile specify iods number for the video profile atom (from -1 to 255), default is `-1` ism\_lookahead num\_entries specify number of lookahead entries for ISM files (from 0 to 255), default is `0` min\_frag\_duration duration do not create fragments that are shorter than duration microseconds long moov\_size bytes Reserves space for the moov atom at the beginning of the file instead of placing the moov atom at the end. If the space reserved is insufficient, muxing will fail. mov\_gamma gamma specify gamma value for gama atom (as a decimal number from 0 to 10), default is `0.0`, must be set together with `+ movflags` movflags flags Set various muxing switches. The following flags can be used: ‘cmaf’ write CMAF (Common Media Application Format) compatible fragmented MP4 output ‘dash’ write DASH (Dynamic Adaptive Streaming over HTTP) compatible fragmented MP4 output ‘default\_base\_moof’ Similarly to the ‘omit\_tfhd\_offset’ flag, this flag avoids writing the absolute base\_data\_offset field in tfhd atoms, but does so by using the new default-base-is-moof flag instead. This flag is new from 14496-12:2012. This may make the fragments easier to parse in certain circumstances (avoiding basing track fragment location calculations on the implicit end of the previous track fragment). ‘delay\_moov’ delay writing the initial moov until the first fragment is cut, or until the first fragment flush ‘disable\_chpl’ Disable Nero chapter markers (chpl atom). Normally, both Nero chapters and a QuickTime chapter track are written to the file. With this option set, only the QuickTime chapter track will be written. Nero chapters can cause failures when the file is reprocessed with certain tagging programs, like mp3Tag 2.61a and iTunes 11.3, most likely other versions are affected as well. ‘faststart’ Run a second pass moving the index (moov atom) to the beginning of the file. This operation can take a while, and will not work in various situations such as fragmented output, thus it is not enabled by default. ‘frag\_custom’ Allow the caller to manually choose when to cut fragments, by calling `av_write_frame(ctx, NULL)` to write a fragment with the packets written so far. (This is only useful with other applications integrating libavformat, not from `ffmpeg`.) ‘frag\_discont’ signal that the next fragment is discontinuous from earlier ones ‘frag\_every\_frame’ fragment at every frame ‘frag\_keyframe’ start a new fragment at each video keyframe ‘global\_sidx’ write a global sidx index at the start of the file ‘isml’ create a live smooth streaming feed (for pushing to a publishing point) ‘negative\_cts\_offsets’ Enables utilization of version 1 of the CTTS box, in which the CTS offsets can be negative. This enables the initial sample to have DTS/CTS of zero, and reduces the need for edit lists for some cases such as video tracks with B-frames. Additionally, eases conformance with the DASH-IF interoperability guidelines. This option is implicitly set when writing ‘ismv’ (Smooth Streaming) files. ‘omit\_tfhd\_offset’ Do not write any absolute base\_data\_offset in tfhd atoms. This avoids tying fragments to absolute byte positions in the file/streams. ‘prefer\_icc’ If writing colr atom prioritise usage of ICC profile if it exists in stream packet side data. ‘rtphint’ add RTP hinting tracks to the output file ‘separate\_moof’ Write a separate moof (movie fragment) atom for each track. Normally, packets for all tracks are written in a moof atom (which is slightly more efficient), but with this option set, the muxer writes one moof/mdat pair for each track, making it easier to separate tracks. ‘skip\_sidx’ Skip writing of sidx atom. When bitrate overhead due to sidx atom is high, this option could be used for cases where sidx atom is not mandatory. When the ‘global\_sidx’ flag is enabled, this option is ignored. ‘skip\_trailer’ skip writing the mfra/tfra/mfro trailer for fragmented files ‘use\_metadata\_tags’ use mdta atom for metadata ‘write\_colr’ write colr atom even if the color info is unspecified. This flag is experimental, may be renamed or changed, do not use from scripts. ‘write\_gama’ write deprecated gama atom ‘hybrid\_fragmented’ For recoverability - write the output file as a fragmented file. This allows the intermediate file to be read while being written (in particular, if the writing process is aborted uncleanly). When writing is finished, the file is converted to a regular, non-fragmented file, which is more compatible and allows easier and quicker seeking. If writing is aborted, the intermediate file can manually be remuxed to get a regular, non-fragmented file of what had been written into the unfinished file. movie\_timescale scale Set the timescale written in the movie header box (`mvhd`). Range is 1 to INT\_MAX. Default is `1000`. rtpflags flags Add RTP hinting tracks to the output file. The following flags can be used: ‘h264\_mode0’ use mode 0 for H.264 in RTP ‘latm’ use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC ‘rfc2190’ use RFC 2190 packetization instead of RFC 4629 for H.263 ‘send\_bye’ send RTCP BYE packets when finishing ‘skip\_rtcp’ do not send RTCP sender reports skip\_iods bool skip writing iods atom (default value is `true`) use\_editlist bool use edit list (default value is `auto`) use\_stream\_ids\_as\_track\_ids bool use stream ids as track ids (default value is `false`) video\_track\_timescale scale Set the timescale used for video tracks. Range is `0` to INT\_MAX. If set to `0`, the timescale is automatically set based on the native stream time base. Default is `0`. write\_btrt bool Force or disable writing bitrate box inside stsd box of a track. The box contains decoding buffer size (in bytes), maximum bitrate and average bitrate for the track. The box will be skipped if none of these values can be computed. Default is `-1` or `auto`, which will write the box only in MP4 mode. write\_prft option Write producer time reference box (PRFT) with a specified time source for the NTP field in the PRFT box. Set value as ‘wallclock’ to specify timesource as wallclock time and ‘pts’ to specify timesource as input packets’ PTS values. write\_tmcd bool Specify `on` to force writing a timecode track, `off` to disable it and `auto` to write a timecode track only for mov and mp4 output (default). Setting value to ‘pts’ is applicable only for a live encoding use case, where PTS values are set as as wallclock time at the source. For example, an encoding use case with decklink capture source where video\_pts and audio\_pts are set to ‘abs\_wallclock’. #### 21.4.3 Examples * Push Smooth Streaming content in real time to a publishing point on IIS with the ‘ismv’ muxer using `ffmpeg`: ffmpeg -re <normal input/transcoding options> -movflags isml+frag\_keyframe -f ismv http://server/publishingpoint.isml/Streams(Encoder1) ### 21.5 a64 A64 Commodore 64 video muxer. This muxer accepts a single `a64_multi` or `a64_multi5` codec video stream. ### 21.6 ac4 Raw AC-4 audio muxer. This muxer accepts a single `ac4` audio stream. #### 21.6.1 Options write\_crc bool when enabled, write a CRC checksum for each packet to the output, default is `false` ### 21.7 adts Audio Data Transport Stream muxer. It accepts a single AAC stream. #### 21.7.1 Options write\_id3v2 bool Enable to write ID3v2.4 tags at the start of the stream. Default is disabled. write\_apetag bool Enable to write APE tags at the end of the stream. Default is disabled. write\_mpeg2 bool Enable to set MPEG version bit in the ADTS frame header to 1 which indicates MPEG-2. Default is 0, which indicates MPEG-4. ### 21.8 aea MD STUDIO audio muxer. This muxer accepts a single ATRAC1 audio stream with either one or two channels and a sample rate of 44100Hz. As AEA supports storing the track title, this muxer will also write the title from stream’s metadata to the container. ### 21.9 aiff Audio Interchange File Format muxer. #### 21.9.1 Options write\_id3v2 bool Enable ID3v2 tags writing when set to 1. Default is 0 (disabled). id3v2\_version bool Select ID3v2 version to write. Currently only version 3 and 4 (aka. ID3v2.3 and ID3v2.4) are supported. The default is version 4. ### 21.10 alp High Voltage Software’s Lego Racers game audio muxer. It accepts a single ADPCM\_IMA\_ALP stream with no more than 2 channels and a sample rate not greater than 44100 Hz. Extensions: `tun`, `pcm` #### 21.10.1 Options type type Set file type. type accepts the following values: ‘tun’ Set file type as music. Must have a sample rate of 22050 Hz. ‘pcm’ Set file type as sfx. ‘auto’ Set file type as per output file extension. `.pcm` results in type `pcm` else type `tun` is set. (default) ### 21.11 amr 3GPP AMR (Adaptive Multi-Rate) audio muxer. It accepts a single audio stream containing an AMR NB stream. ### 21.12 amv AMV (Actions Media Video) format muxer. ### 21.13 apm Ubisoft Rayman 2 APM audio muxer. It accepts a single ADPCM IMA APM audio stream. ### 21.14 apng Animated Portable Network Graphics muxer. It accepts a single APNG video stream. #### 21.14.1 Options final\_delay delay Force a delay expressed in seconds after the last frame of each repetition. Default value is `0.0`. plays repetitions specify how many times to play the content, `0` causes an infinte loop, with `1` there is no loop #### 21.14.2 Examples * Use `ffmpeg` to generate an APNG output with 2 repetitions, and with a delay of half a second after the first repetition: ffmpeg -i INPUT -final\_delay 0.5 -plays 2 out.apng ### 21.15 argo\_asf Argonaut Games ASF audio muxer. It accepts a single ADPCM audio stream. #### 21.15.1 Options version\_major version override file major version, specified as an integer, default value is `2` version\_minor version override file minor version, specified as an integer, default value is `1` name name Embed file name into file, if not specified use the output file name. The name is truncated to 8 characters. ### 21.16 argo\_cvg Argonaut Games CVG audio muxer. It accepts a single one-channel ADPCM 22050Hz audio stream. The loop and reverb options set the corresponding flags in the header which can be later retrieved to process the audio stream accordingly. #### 21.16.1 Options skip\_rate\_check bool skip sample rate check (default is `false`) loop bool set loop flag (default is `false`) reverb boolean set reverb flag (default is `true`) ### 21.17 asf, asf\_stream Advanced / Active Systems (or Streaming) Format audio muxer. The ‘asf\_stream’ variant should be selected for streaming. Note that Windows Media Audio (wma) and Windows Media Video (wmv) use this muxer too. #### 21.17.1 Options packet\_size size Set the muxer packet size as a number of bytes. By tuning this setting you may reduce data fragmentation or muxer overhead depending on your source. Default value is `3200`, minimum is `100`, maximum is `64Ki`. ### 21.18 ass ASS/SSA (SubStation Alpha) subtitles muxer. It accepts a single ASS subtitles stream. #### 21.18.1 Options ignore\_readorder bool Write dialogue events immediately, even if they are out-of-order, default is `false`, otherwise they are cached until the expected time event is found. ### 21.19 ast AST (Audio Stream) muxer. This format is used to play audio on some Nintendo Wii games. It accepts a single audio stream. The loopstart and loopend options can be used to define a section of the file to loop for players honoring such options. #### 21.19.1 Options loopstart start Specify loop start position expressesd in milliseconds, from `-1` to `INT_MAX`, in case `-1` is set then no loop is specified (default -1) and the loopend value is ignored. loopend end Specify loop end position expressed in milliseconds, from `0` to `INT_MAX`, default is `0`, in case `0` is set it assumes the total stream duration. ### 21.20 au SUN AU audio muxer. It accepts a single audio stream. ### 21.21 avi Audio Video Interleaved muxer. AVI is a proprietary format developed by Microsoft, and later formally specified through the Open DML specification. Because of differences in players implementations, it might be required to set some options to make sure that the generated output can be correctly played by the target player. #### 21.21.1 Options flipped\_raw\_rgb bool If set to `true`, store positive height for raw RGB bitmaps, which indicates bitmap is stored bottom-up. Note that this option does not flip the bitmap which has to be done manually beforehand, e.g. by using the ‘vflip’ filter. Default is `false` and indicates bitmap is stored top down. reserve\_index\_space size Reserve the specified amount of bytes for the OpenDML master index of each stream within the file header. By default additional master indexes are embedded within the data packets if there is no space left in the first master index and are linked together as a chain of indexes. This index structure can cause problems for some use cases, e.g. third-party software strictly relying on the OpenDML index specification or when file seeking is slow. Reserving enough index space in the file header avoids these problems. The required index space depends on the output file size and should be about 16 bytes per gigabyte. When this option is omitted or set to zero the necessary index space is guessed. Default value is `0`. write\_channel\_mask bool Write the channel layout mask into the audio stream header. This option is enabled by default. Disabling the channel mask can be useful in specific scenarios, e.g. when merging multiple audio streams into one for compatibility with software that only supports a single audio stream in AVI (see (ffmpeg-filters)the "amerge" section in the ffmpeg-filters manual). ### 21.22 avif AV1 (Alliance for Open Media Video codec 1) image format muxer. This muxers stores images encoded using the AV1 codec. It accepts one or two video streams. In case two video streams are provided, the second one shall contain a single plane storing the alpha mask. In case more than one image is provided, the generated output is considered an animated AVIF and the number of loops can be specified with the loop option. This is based on the specification by Alliance for Open Media at url https://aomediacodec.github.io/av1-avif. #### 21.22.1 Options loop count number of times to loop an animated AVIF, `0` specify an infinite loop, default is `0` movie\_timescale timescale Set the timescale written in the movie header box (`mvhd`). Range is 1 to INT\_MAX. Default is `1000`. ### 21.23 avm2 ShockWave Flash (SWF) / ActionScript Virtual Machine 2 (AVM2) format muxer. It accepts one audio stream, one video stream, or both. ### 21.24 bit G.729 (.bit) file format muxer. It accepts a single G.729 audio stream. ### 21.25 caf Apple CAF (Core Audio Format) muxer. It accepts a single audio stream. ### 21.26 codec2 Codec2 audio audio muxer. It accepts a single codec2 audio stream. ### 21.27 chromaprint Chromaprint fingerprinter muxers. To enable compilation of this filter you need to configure FFmpeg with `--enable-chromaprint`. This muxer feeds audio data to the Chromaprint library, which generates a fingerprint for the provided audio data. See: https://acoustid.org/chromaprint It takes a single signed native-endian 16-bit raw audio stream of at most 2 channels. #### 21.27.1 Options algorithm version Select version of algorithm to fingerprint with. Range is `0` to `4`. Version `3` enables silence detection. Default is `1`. fp\_format format Format to output the fingerprint as. Accepts the following options: ‘base64’ Base64 compressed fingerprint _(default)_ ‘compressed’ Binary compressed fingerprint ‘raw’ Binary raw fingerprint silence\_threshold threshold Threshold for detecting silence. Range is from `-1` to `32767`, where `-1` disables silence detection. Silence detection can only be used with version `3` of the algorithm. Silence detection must be disabled for use with the AcoustID service. Default is `-1`. ### 21.28 crc CRC (Cyclic Redundancy Check) muxer. This muxer computes and prints the Adler-32 CRC of all the input audio and video frames. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the CRC. The output of the muxer consists of a single line of the form: CRC=0xCRC, where CRC is a hexadecimal number 0-padded to 8 digits containing the CRC for all the decoded input frames. See also the framecrc muxer. #### 21.28.1 Examples * Use `ffmpeg` to compute the CRC of the input, and store it in the file out.crc: ffmpeg -i INPUT -f crc out.crc * Use `ffmpeg` to print the CRC to stdout with the command: ffmpeg -i INPUT -f crc - * You can select the output format of each frame with `ffmpeg` by specifying the audio and video codec and format. For example, to compute the CRC of the input audio converted to PCM unsigned 8-bit and the input video converted to MPEG-2 video, use the command: ffmpeg -i INPUT -c:a pcm\_u8 -c:v mpeg2video -f crc - ### 21.29 dash Dynamic Adaptive Streaming over HTTP (DASH) muxer. This muxer creates segments and manifest files according to the MPEG-DASH standard ISO/IEC 23009-1:2014 and following standard updates. For more information see: * ISO DASH Specification: http://standards.iso.org/ittf/PubliclyAvailableStandards/c065274\_ISO\_IEC\_23009-1\_2014.zip * WebM DASH Specification: https://sites.google.com/a/webmproject.org/wiki/adaptive-streaming/webm-dash-specification This muxer creates an MPD (Media Presentation Description) manifest file and segment files for each stream. Segment files are placed in the same directory of the MPD manifest file. The segment filename might contain pre-defined identifiers used in the manifest `SegmentTemplate` section as defined in section 5.3.9.4.4 of the standard. Available identifiers are `$RepresentationID$`, `$Number$`, `$Bandwidth$`, and `$Time$`. In addition to the standard identifiers, an ffmpeg-specific `$ext$` identifier is also supported. When specified, `ffmpeg` will replace `$ext$` in the file name with muxing format’s extensions such as `mp4`, `webm` etc. #### 21.29.1 Options adaptation\_sets adaptation\_sets Assign streams to adaptation sets, specified in the MPD manifest `AdaptationSets` section. An adaptation set contains a set of one or more streams accessed as a single subset, e.g. corresponding streams encoded at different size selectable by the user depending on the available bandwidth, or to different audio streams with a different language. Each adaptation set is specified with the syntax: id=index,streams=streams where index must be a numerical index, and streams is a sequence of `,`\-separated stream indices. Multiple adaptation sets can be specified, separated by spaces. To map all video (or audio) streams to an adaptation set, `v` (or `a`) can be used as stream identifier instead of IDs. When no assignment is defined, this defaults to an adaptation set for each stream. The following optional fields can also be specified: descriptor Define the descriptor as defined by ISO/IEC 23009-1:2014/Amd.2:2015. For example: <SupplementalProperty schemeIdUri=\\"urn:mpeg:dash:srd:2014\\" value=\\"0,0,0,1,1,2,2\\"/> The descriptor string should be a self-closing XML tag. frag\_duration Override the global fragment duration specified with the frag\_duration option. frag\_type Override the global fragment type specified with the frag\_type option. seg\_duration Override the global segment duration specified with the seg\_duration option. trick\_id Mark an adaptation set as containing streams meant to be used for Trick Mode for the referenced adaptation set. A few examples of possible values for the adaptation\_sets option follow: id=0,seg\_duration=2,frag\_duration=1,frag\_type=duration,streams=v id=1,seg\_duration=2,frag\_type=none,streams=a id=0,seg\_duration=2,frag\_type=none,streams=0 id=1,seg\_duration=10,frag\_type=none,trick\_id=0,streams=1 dash\_segment\_type type Set DASH segment files type. Possible values: ‘auto’ The dash segment files format will be selected based on the stream codec. This is the default mode. ‘mp4’ the dash segment files will be in ISOBMFF/MP4 format ‘webm’ the dash segment files will be in WebM format extra\_window\_size size Set the maximum number of segments kept outside of the manifest before removing from disk. format\_options options\_list Set container format (mp4/webm) options using a `:`\-separated list of key=value parameters. Values containing `:` special characters must be escaped. frag\_duration duration Set the length in seconds of fragments within segments, fractional value can also be set. frag\_type type Set the type of interval for fragmentation. Possible values: ‘auto’ set one fragment per segment ‘every\_frame’ fragment at every frame ‘duration’ fragment at specific time intervals ‘pframes’ fragment at keyframes and following P-Frame reordering (Video only, experimental) global\_sidx bool Write global `SIDX` atom. Applicable only for single file, mp4 output, non-streaming mode. hls\_master\_name file\_name HLS master playlist name. Default is master.m3u8. hls\_playlist bool Generate HLS playlist files. The master playlist is generated with filename specified by the hls\_master\_name option. One media playlist file is generated for each stream with filenames media\_0.m3u8, media\_1.m3u8, etc. http\_opts http\_opts Specify a list of `:`\-separated key=value options to pass to the underlying HTTP protocol. Applicable only for HTTP output. http\_persistent bool Use persistent HTTP connections. Applicable only for HTTP output. http\_user\_agent user\_agent Override User-Agent field in HTTP header. Applicable only for HTTP output. ignore\_io\_errors bool Ignore IO errors during open and write. Useful for long-duration runs with network output. This is disabled by default. index\_correction bool Enable or disable segment index correction logic. Applicable only when use\_template is enabled and use\_timeline is disabled. This is disabled by default. When enabled, the logic monitors the flow of segment indexes. If a streams’s segment index value is not at the expected real time position, then the logic corrects that index value. Typically this logic is needed in live streaming use cases. The network bandwidth fluctuations are common during long run streaming. Each fluctuation can cause the segment indexes fall behind the expected real time position. init\_seg\_name init\_name DASH-templated name to use for the initialization segment. Default is `init-stream$RepresentationID$.$ext$`. `$ext$` is replaced with the file name extension specific for the segment format. ldash bool Enable Low-latency Dash by constraining the presence and values of some elements. This is disabled by default. lhls bool Enable Low-latency HLS (LHLS). Add `#EXT-X-PREFETCH` tag with current segment’s URI. hls.js player folks are trying to standardize an open LHLS spec. The draft spec is available at https://github.com/video-dev/hlsjs-rfcs/blob/lhls-spec/proposals/0001-lhls.md. This option tries to comply with the above open spec. It enables streaming and hls\_playlist options automatically. This is an experimental feature. Note: This is not Apple’s version LHLS. See https://datatracker.ietf.org/doc/html/draft-pantos-hls-rfc8216bis master\_m3u8\_publish\_rate segment\_intervals\_count Publish master playlist repeatedly every after specified number of segment intervals. max\_playback\_rate rate Set the maximum playback rate indicated as appropriate for the purposes of automatically adjusting playback latency and buffer occupancy during normal playback by clients. media\_seg\_name segment\_name DASH-templated name to use for the media segments. Default is `chunk-stream$RepresentationID$-$Number%05d$.$ext$`. `$ext$` is replaced with the file name extension specific for the segment format. method method Use the given HTTP method to create output files. Generally set to `PUT` or `POST`. min\_playback\_rate rate Set the minimum playback rate indicated as appropriate for the purposes of automatically adjusting playback latency and buffer occupancy during normal playback by clients. mpd\_profile flags Set one or more MPD manifest profiles. Possible values: ‘dash’ MPEG-DASH ISO Base media file format live profile ‘dvb\_dash’ DVB-DASH profile Default value is `dash`. remove\_at\_exit bool Enable or disable removal of all segments when finished. This is disabled by default. seg\_duration duration Set the segment length in seconds (fractional value can be set). The value is treated as average segment duration when the use\_template option is enabled and the use\_timeline option is disabled and as minimum segment duration for all the other use cases. Default value is `5`. single\_file bool Enable or disable storing all segments in one file, accessed using byte ranges. This is disabled by default. The name of the single file can be specified with the single\_file\_name option, if not specified assume the basename of the manifest file with the output format extension. single\_file\_name file\_name DASH-templated name to use for the manifest `baseURL` element. Imply that the single\_file option is set to true. In the template, `$ext$` is replaced with the file name extension specific for the segment format. streaming bool Enable or disable chunk streaming mode of output. In chunk streaming mode, each frame will be a `moof` fragment which forms a chunk. This is disabled by default. target\_latency target\_latency Set an intended target latency in seconds for serving (fractional value can be set). Applicable only when the streaming and write\_prft options are enabled. This is an informative fields clients can use to measure the latency of the service. timeout timeout Set timeout for socket I/O operations expressed in seconds (fractional value can be set). Applicable only for HTTP output. update\_period period Set the MPD update period, for dynamic content. The unit is second. If set to `0`, the period is automatically computed. Default value is `0`. use\_template bool Enable or disable use of `SegmentTemplate` instead of `SegmentList` in the manifest. This is enabled by default. use\_timeline bool Enable or disable use of `SegmentTimeline` within the `SegmentTemplate` manifest section. This is enabled by default. utc\_timing\_url url URL of the page that will return the UTC timestamp in ISO format, for example `https://time.akamai.com/?iso` window\_size size Set the maximum number of segments kept in the manifest, discard the oldest one. This is useful for live streaming. If the value is `0`, all segments are kept in the manifest. Default value is `0`. write\_prft write\_prft Write Producer Reference Time elements on supported streams. This also enables writing prft boxes in the underlying muxer. Applicable only when the utc\_url option is enabled. It is set to auto by default, in which case the muxer will attempt to enable it only in modes that require it. #### 21.29.2 Example Generate a DASH output reading from an input source in realtime using `ffmpeg`. Two multimedia streams are generated from the input file, both containing a video stream encoded through ‘libx264’, and an audio stream encoded with ‘libfdk\_aac’. The first multimedia stream contains video with a bitrate of 800k and audio at the default rate, the second with video scaled to 320x170 pixels at 300k and audio resampled at 22005 Hz. The window\_size option keeps only the latest 5 segments with the default duration of 5 seconds. ffmpeg -re -i <input> -map 0 -map 0 -c:a libfdk\_aac -c:v libx264 \\ -b:v:0 800k -profile:v:0 main \\ -b:v:1 300k -s:v:1 320x170 -profile:v:1 baseline -ar:a:1 22050 \\ -bf 1 -keyint\_min 120 -g 120 -sc\_threshold 0 -b\_strategy 0 \\ -use\_timeline 1 -use\_template 1 -window\_size 5 \\ -adaptation\_sets "id=0,streams=v id=1,streams=a" \\ -f dash /path/to/out.mpd ### 21.30 daud D-Cinema audio muxer. It accepts a single 6-channels audio stream resampled at 96000 Hz encoded with the ‘pcm\_24daud’ codec. #### 21.30.1 Example Use `ffmpeg` to mux input audio to a ‘5.1’ channel layout resampled at 96000Hz: ffmpeg -i INPUT -af aresample=96000,pan=5.1 slow.302 For ffmpeg versions before 7.0 you might have to use the ‘asetnsamples’ filter to limit the muxed packet size, because this format does not support muxing packets larger than 65535 bytes (3640 samples). For newer ffmpeg versions audio is automatically packetized to 36000 byte (2000 sample) packets. ### 21.31 dv DV (Digital Video) muxer. It accepts exactly one ‘dvvideo’ video stream and at most two ‘pcm\_s16’ audio streams. More constraints are defined by the property of the video, which must correspond to a DV video supported profile, and on the framerate. #### 21.31.1 Example Use `ffmpeg` to convert the input: ffmpeg -i INPUT -s:v 720x480 -pix\_fmt yuv411p -r 29.97 -ac 2 -ar 48000 -y out.dv ### 21.32 ffmetadata FFmpeg metadata muxer. This muxer writes the streams metadata in the ‘ffmetadata’ format. See (ffmpeg-formats)the Metadata chapter for information about the format. #### 21.32.1 Example Use `ffmpeg` to extract metadata from an input file to a metadata.ffmeta file in ‘ffmetadata’ format: ffmpeg -i INPUT -f ffmetadata metadata.ffmeta ### 21.33 fifo FIFO (First-In First-Out) muxer. The ‘fifo’ pseudo-muxer allows the separation of encoding and muxing by using a first-in-first-out queue and running the actual muxer in a separate thread. This is especially useful in combination with the tee muxer and can be used to send data to several destinations with different reliability/writing speed/latency. The target muxer is either selected from the output name or specified through the fifo\_format option. The behavior of the ‘fifo’ muxer if the queue fills up or if the output fails (e.g. if a packet cannot be written to the output) is selectable: * Output can be transparently restarted with configurable delay between retries based on real time or time of the processed stream. * Encoding can be blocked during temporary failure, or continue transparently dropping packets in case the FIFO queue fills up. API users should be aware that callback functions (`interrupt_callback`, `io_open` and `io_close`) used within its `AVFormatContext` must be thread-safe. #### 21.33.1 Options attempt\_recovery bool If failure occurs, attempt to recover the output. This is especially useful when used with network output, since it makes it possible to restart streaming transparently. By default this option is set to `false`. drop\_pkts\_on\_overflow bool If set to `true`, in case the fifo queue fills up, packets will be dropped rather than blocking the encoder. This makes it possible to continue streaming without delaying the input, at the cost of omitting part of the stream. By default this option is set to `false`, so in such cases the encoder will be blocked until the muxer processes some of the packets and none of them is lost. fifo\_format format\_name Specify the format name. Useful if it cannot be guessed from the output name suffix. format\_opts options Specify format options for the underlying muxer. Muxer options can be specified as a list of key\=value pairs separated by ’:’. max\_recovery\_attempts count Set maximum number of successive unsuccessful recovery attempts after which the output fails permanently. By default this option is set to `0` (unlimited). queue\_size size Specify size of the queue as a number of packets. Default value is `60`. recover\_any\_error bool If set to `true`, recovery will be attempted regardless of type of the error causing the failure. By default this option is set to `false` and in case of certain (usually permanent) errors the recovery is not attempted even when the attempt\_recovery option is set to `true`. recovery\_wait\_streamtime bool If set to `false`, the real time is used when waiting for the recovery attempt (i.e. the recovery will be attempted after the time specified by the recovery\_wait\_time option). If set to `true`, the time of the processed stream is taken into account instead (i.e. the recovery will be attempted after discarding the packets corresponding to the recovery\_wait\_time option). By default this option is set to `false`. recovery\_wait\_time duration Specify waiting time in seconds before the next recovery attempt after previous unsuccessful recovery attempt. Default value is `5`. restart\_with\_keyframe bool Specify whether to wait for the keyframe after recovering from queue overflow or failure. This option is set to `false` by default. timeshift duration Buffer the specified amount of packets and delay writing the output. Note that the value of the queue\_size option must be big enough to store the packets for timeshift. At the end of the input the fifo buffer is flushed at realtime speed. #### 21.33.2 Example Use `ffmpeg` to stream to an RTMP server, continue processing the stream at real-time rate even in case of temporary failure (network outage) and attempt to recover streaming every second indefinitely: ffmpeg -re -i ... -c:v libx264 -c:a aac -f fifo -fifo\_format flv \\ -drop\_pkts\_on\_overflow 1 -attempt\_recovery 1 -recovery\_wait\_time 1 \\ -map 0:v -map 0:a rtmp://example.com/live/stream\_name ### 21.34 film\_cpk Sega film (.cpk) muxer. This format was used as internal format for several Sega games. For more information regarding the Sega film file format, visit http://wiki.multimedia.cx/index.php?title=Sega\_FILM. It accepts at maximum one ‘cinepak’ or raw video stream, and at maximum one audio stream. ### 21.35 filmstrip Adobe Filmstrip muxer. This format is used by several Adobe tools to store a generated filmstrip export. It accepts a single raw video stream. ### 21.36 fits Flexible Image Transport System (FITS) muxer. This image format is used to store astronomical data. For more information regarding the format, visit https://fits.gsfc.nasa.gov. ### 21.37 flac Raw FLAC audio muxer. This muxer accepts exactly one FLAC audio stream. Additionally, it is possible to add images with disposition ‘attached\_pic’. #### 21.37.1 Options write\_header bool write the file header if set to `true`, default is `true` #### 21.37.2 Example Use `ffmpeg` to store the audio stream from an input file, together with several pictures used with ‘attached\_pic’ disposition: ffmpeg -i INPUT -i pic1.png -i pic2.jpg -map 0:a -map 1 -map 2 -disposition:v attached\_pic OUTPUT ### 21.38 flv Adobe Flash Video Format muxer. #### 21.38.1 Options flvflags flags Possible values: ‘aac\_seq\_header\_detect’ Place AAC sequence header based on audio stream data. ‘no\_sequence\_end’ Disable sequence end tag. ‘no\_metadata’ Disable metadata tag. ‘no\_duration\_filesize’ Disable duration and filesize in metadata when they are equal to zero at the end of stream. (Be used to non-seekable living stream). ‘add\_keyframe\_index’ Used to facilitate seeking; particularly for HTTP pseudo streaming. ### 21.39 framecrc Per-packet CRC (Cyclic Redundancy Check) testing format. This muxer computes and prints the Adler-32 CRC for each audio and video packet. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the CRC. The output of the muxer consists of a line for each audio and video packet of the form: stream\_index, packet\_dts, packet\_pts, packet\_duration, packet\_size, 0xCRC CRC is a hexadecimal number 0-padded to 8 digits containing the CRC of the packet. #### 21.39.1 Examples For example to compute the CRC of the audio and video frames in INPUT, converted to raw audio and video packets, and store it in the file out.crc: ffmpeg -i INPUT -f framecrc out.crc To print the information to stdout, use the command: ffmpeg -i INPUT -f framecrc - With `ffmpeg`, you can select the output format to which the audio and video frames are encoded before computing the CRC for each packet by specifying the audio and video codec. For example, to compute the CRC of each decoded input audio frame converted to PCM unsigned 8-bit and of each decoded input video frame converted to MPEG-2 video, use the command: ffmpeg -i INPUT -c:a pcm\_u8 -c:v mpeg2video -f framecrc - See also the crc muxer. ### 21.40 framehash Per-packet hash testing format. This muxer computes and prints a cryptographic hash for each audio and video packet. This can be used for packet-by-packet equality checks without having to individually do a binary comparison on each. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the hash, but the output of explicit conversions to other codecs can also be used. It uses the SHA-256 cryptographic hash function by default, but supports several other algorithms. The output of the muxer consists of a line for each audio and video packet of the form: stream\_index, packet\_dts, packet\_pts, packet\_duration, packet\_size, hash hash is a hexadecimal number representing the computed hash for the packet. hash algorithm Use the cryptographic hash function specified by the string algorithm. Supported values include `MD5`, `murmur3`, `RIPEMD128`, `RIPEMD160`, `RIPEMD256`, `RIPEMD320`, `SHA160`, `SHA224`, `SHA256` (default), `SHA512/224`, `SHA512/256`, `SHA384`, `SHA512`, `CRC32` and `adler32`. #### 21.40.1 Examples To compute the SHA-256 hash of the audio and video frames in INPUT, converted to raw audio and video packets, and store it in the file out.sha256: ffmpeg -i INPUT -f framehash out.sha256 To print the information to stdout, using the MD5 hash function, use the command: ffmpeg -i INPUT -f framehash -hash md5 - See also the hash muxer. ### 21.41 framemd5 Per-packet MD5 testing format. This is a variant of the framehash muxer. Unlike that muxer, it defaults to using the MD5 hash function. #### 21.41.1 Examples To compute the MD5 hash of the audio and video frames in INPUT, converted to raw audio and video packets, and store it in the file out.md5: ffmpeg -i INPUT -f framemd5 out.md5 To print the information to stdout, use the command: ffmpeg -i INPUT -f framemd5 - See also the framehash and md5 muxers. ### 21.42 gif Animated GIF muxer. Note that the GIF format has a very large time base: the delay between two frames can therefore not be smaller than one centi second. #### 21.42.1 Options loop bool Set the number of times to loop the output. Use `-1` for no loop, `0` for looping indefinitely (default). final\_delay delay Force the delay (expressed in centiseconds) after the last frame. Each frame ends with a delay until the next frame. The default is `-1`, which is a special value to tell the muxer to re-use the previous delay. In case of a loop, you might want to customize this value to mark a pause for instance. #### 21.42.2 Example Encode a gif looping 10 times, with a 5 seconds delay between the loops: ffmpeg -i INPUT -loop 10 -final\_delay 500 out.gif Note 1: if you wish to extract the frames into separate GIF files, you need to force the image2 muxer: ffmpeg -i INPUT -c:v gif -f image2 "out%d.gif" ### 21.43 gxf General eXchange Format (GXF) muxer. GXF was developed by Grass Valley Group, then standardized by SMPTE as SMPTE 360M and was extended in SMPTE RDD 14-2007 to include high-definition video resolutions. It accepts at most one video stream with codec ‘mjpeg’, or ‘mpeg1video’, or ‘mpeg2video’, or ‘dvvideo’ with resolution ‘512x480’ or ‘608x576’, and several audio streams with rate 48000Hz and codec ‘pcm16\_le’. ### 21.44 hash Hash testing format. This muxer computes and prints a cryptographic hash of all the input audio and video frames. This can be used for equality checks without having to do a complete binary comparison. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the hash, but the output of explicit conversions to other codecs can also be used. Timestamps are ignored. It uses the SHA-256 cryptographic hash function by default, but supports several other algorithms. The output of the muxer consists of a single line of the form: algo\=hash, where algo is a short string representing the hash function used, and hash is a hexadecimal number representing the computed hash. hash algorithm Use the cryptographic hash function specified by the string algorithm. Supported values include `MD5`, `murmur3`, `RIPEMD128`, `RIPEMD160`, `RIPEMD256`, `RIPEMD320`, `SHA160`, `SHA224`, `SHA256` (default), `SHA512/224`, `SHA512/256`, `SHA384`, `SHA512`, `CRC32` and `adler32`. #### 21.44.1 Examples To compute the SHA-256 hash of the input converted to raw audio and video, and store it in the file out.sha256: ffmpeg -i INPUT -f hash out.sha256 To print an MD5 hash to stdout use the command: ffmpeg -i INPUT -f hash -hash md5 - See also the framehash muxer. ### 21.45 hds HTTP Dynamic Streaming (HDS) muxer. HTTP dynamic streaming, or HDS, is an adaptive bitrate streaming method developed by Adobe. HDS delivers MP4 video content over HTTP connections. HDS can be used for on-demand streaming or live streaming. This muxer creates an .f4m (Adobe Flash Media Manifest File) manifest, an .abst (Adobe Bootstrap File) for each stream, and segment files in a directory specified as the output. These needs to be accessed by an HDS player throuhg HTTPS for it to be able to perform playback on the generated stream. #### 21.45.1 Options extra\_window\_size int number of fragments kept outside of the manifest before removing from disk min\_frag\_duration microseconds minimum fragment duration (in microseconds), default value is 1 second (`10000000`) remove\_at\_exit bool remove all fragments when finished when set to `true` window\_size int number of fragments kept in the manifest, if set to a value different from `0`. By default all segments are kept in the output directory. #### 21.45.2 Example Use `ffmpeg` to generate HDS files to the output.hds directory in real-time rate: ffmpeg -re -i INPUT -f hds -b:v 200k output.hds ### 21.46 hls Apple HTTP Live Streaming muxer that segments MPEG-TS according to the HTTP Live Streaming (HLS) specification. It creates a playlist file, and one or more segment files. The output filename specifies the playlist filename. By default, the muxer creates a file for each segment produced. These files have the same name as the playlist, followed by a sequential number and a .ts extension. Make sure to require a closed GOP when encoding and to set the GOP size to fit your segment time constraint. For example, to convert an input file with `ffmpeg`: ffmpeg -i in.mkv -c:v h264 -flags +cgop -g 30 -hls\_time 1 out.m3u8 This example will produce the playlist, out.m3u8, and segment files: out0.ts, out1.ts, out2.ts, etc. See also the segment muxer, which provides a more generic and flexible implementation of a segmenter, and can be used to perform HLS segmentation. #### 21.46.1 Options hls\_init\_time duration Set the initial target segment length. Default value is 0. duration must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. Segment will be cut on the next key frame after this time has passed on the first m3u8 list. After the initial playlist is filled, `ffmpeg` will cut segments at duration equal to hls\_time. hls\_time duration Set the target segment length. Default value is 2. duration must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. Segment will be cut on the next key frame after this time has passed. hls\_list\_size size Set the maximum number of playlist entries. If set to 0 the list file will contain all the segments. Default value is 5. hls\_delete\_threshold size Set the number of unreferenced segments to keep on disk before `hls_flags delete_segments` deletes them. Increase this to allow continue clients to download segments which were recently referenced in the playlist. Default value is 1, meaning segments older than hls\_list\_size+1 will be deleted. hls\_start\_number\_source source Start the playlist sequence number (`#EXT-X-MEDIA-SEQUENCE`) according to the specified source. Unless hls\_flags single\_file is set, it also specifies source of starting sequence numbers of segment and subtitle filenames. In any case, if hls\_flags append\_list is set and read playlist sequence number is greater than the specified start sequence number, then that value will be used as start value. It accepts the following values: generic (default) Set the start numbers according to the start\_number option value. epoch Set the start number as the seconds since epoch (1970-01-01 00:00:00). epoch\_us Set the start number as the microseconds since epoch (1970-01-01 00:00:00). datetime Set the start number based on the current date/time as YYYYmmddHHMMSS. e.g. 20161231235759. start\_number number Start the playlist sequence number (`#EXT-X-MEDIA-SEQUENCE`) from the specified number when hls\_start\_number\_source value is generic. (This is the default case.) Unless hls\_flags single\_file is set, it also specifies starting sequence numbers of segment and subtitle filenames. Default value is 0. hls\_allow\_cache bool Explicitly set whether the client MAY (1) or MUST NOT (0) cache media segments. hls\_base\_url baseurl Append baseurl to every entry in the playlist. Useful to generate playlists with absolute paths. Note that the playlist sequence number must be unique for each segment and it is not to be confused with the segment filename sequence number which can be cyclic, for example if the wrap option is specified. hls\_segment\_filename filename Set the segment filename. Unless the hls\_flags option is set with ‘single\_file’, filename is used as a string format with the segment number appended. For example: ffmpeg -i in.nut -hls\_segment\_filename 'file%03d.ts' out.m3u8 will produce the playlist, out.m3u8, and segment files: file000.ts, file001.ts, file002.ts, etc. filename may contain a full path or relative path specification, but only the file name part without any path will be contained in the m3u8 segment list. Should a relative path be specified, the path of the created segment files will be relative to the current working directory. When strftime\_mkdir is set, the whole expanded value of filename will be written into the m3u8 segment list. When var\_stream\_map is set with two or more variant streams, the filename pattern must contain the string "%v", and this string will be expanded to the position of variant stream index in the generated segment file names. For example: ffmpeg -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var\_stream\_map "v:0,a:0 v:1,a:1" \\ -hls\_segment\_filename 'file\_%v\_%03d.ts' out\_%v.m3u8 will produce the playlists segment file sets: file\_0\_000.ts, file\_0\_001.ts, file\_0\_002.ts, etc. and file\_1\_000.ts, file\_1\_001.ts, file\_1\_002.ts, etc. The string "%v" may be present in the filename or in the last directory name containing the file, but only in one of them. (Additionally, %v may appear multiple times in the last sub-directory or filename.) If the string %v is present in the directory name, then sub-directories are created after expanding the directory name pattern. This enables creation of segments corresponding to different variant streams in subdirectories. For example: ffmpeg -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var\_stream\_map "v:0,a:0 v:1,a:1" \\ -hls\_segment\_filename 'vs%v/file\_%03d.ts' vs%v/out.m3u8 will produce the playlists segment file sets: vs0/file\_000.ts, vs0/file\_001.ts, vs0/file\_002.ts, etc. and vs1/file\_000.ts, vs1/file\_001.ts, vs1/file\_002.ts, etc. strftime bool Use `strftime()` on filename to expand the segment filename with localtime. The segment number is also available in this mode, but to use it, you need to set ‘second\_level\_segment\_index’ in the hls\_flag and %%d will be the specifier. For example: ffmpeg -i in.nut -strftime 1 -hls\_segment\_filename 'file-%Y%m%d-%s.ts' out.m3u8 will produce the playlist, out.m3u8, and segment files: file-20160215-1455569023.ts, file-20160215-1455569024.ts, etc. Note: On some systems/environments, the `%s` specifier is not available. See `strftime()` documentation. For example: ffmpeg -i in.nut -strftime 1 -hls\_flags second\_level\_segment\_index -hls\_segment\_filename 'file-%Y%m%d-%%04d.ts' out.m3u8 will produce the playlist, out.m3u8, and segment files: file-20160215-0001.ts, file-20160215-0002.ts, etc. strftime\_mkdir bool Used together with strftime, it will create all subdirectories which are present in the expanded values of option hls\_segment\_filename. For example: ffmpeg -i in.nut -strftime 1 -strftime\_mkdir 1 -hls\_segment\_filename '%Y%m%d/file-%Y%m%d-%s.ts' out.m3u8 will create a directory 201560215 (if it does not exist), and then produce the playlist, out.m3u8, and segment files: 20160215/file-20160215-1455569023.ts, 20160215/file-20160215-1455569024.ts, etc. For example: ffmpeg -i in.nut -strftime 1 -strftime\_mkdir 1 -hls\_segment\_filename '%Y/%m/%d/file-%Y%m%d-%s.ts' out.m3u8 will create a directory hierarchy 2016/02/15 (if any of them do not exist), and then produce the playlist, out.m3u8, and segment files: 2016/02/15/file-20160215-1455569023.ts, 2016/02/15/file-20160215-1455569024.ts, etc. hls\_segment\_options options\_list Set output format options using a :-separated list of key=value parameters. Values containing `:` special characters must be escaped. hls\_key\_info\_file key\_info\_file Use the information in key\_info\_file for segment encryption. The first line of key\_info\_file specifies the key URI written to the playlist. The key URL is used to access the encryption key during playback. The second line specifies the path to the key file used to obtain the key during the encryption process. The key file is read as a single packed array of 16 octets in binary format. The optional third line specifies the initialization vector (IV) as a hexadecimal string to be used instead of the segment sequence number (default) for encryption. Changes to key\_info\_file will result in segment encryption with the new key/IV and an entry in the playlist for the new key URI/IV if hls\_flags periodic\_rekey is enabled. Key info file format: key URI key file path IV (optional) Example key URIs: http://server/file.key /path/to/file.key file.key Example key file paths: file.key /path/to/file.key Example IV: 0123456789ABCDEF0123456789ABCDEF Key info file example: http://server/file.key /path/to/file.key 0123456789ABCDEF0123456789ABCDEF Example shell script: #!/bin/sh BASE\_URL=${1:-'.'} openssl rand 16 > file.key echo $BASE\_URL/file.key > file.keyinfo echo file.key >> file.keyinfo echo $(openssl rand -hex 16) >> file.keyinfo ffmpeg -f lavfi -re -i testsrc -c:v h264 -hls\_flags delete\_segments \\ -hls\_key\_info\_file file.keyinfo out.m3u8 hls\_enc bool Enable (1) or disable (0) the AES128 encryption. When enabled every segment generated is encrypted and the encryption key is saved as playlist name.key. hls\_enc\_key key Specify a 16-octet key to encrypt the segments, by default it is randomly generated. hls\_enc\_key\_url keyurl If set, keyurl is prepended instead of baseurl to the key filename in the playlist. hls\_enc\_iv iv Specify the 16-octet initialization vector for every segment instead of the autogenerated ones. hls\_segment\_type flags Possible values: ‘mpegts’ Output segment files in MPEG-2 Transport Stream format. This is compatible with all HLS versions. ‘fmp4’ Output segment files in fragmented MP4 format, similar to MPEG-DASH. fmp4 files may be used in HLS version 7 and above. hls\_fmp4\_init\_filename filename Set filename for the fragment files header file, default filename is init.mp4. When strftime is enabled, filename is expanded to the segment filename with localtime. For example: ffmpeg -i in.nut -hls\_segment\_type fmp4 -strftime 1 -hls\_fmp4\_init\_filename "%s\_init.mp4" out.m3u8 will produce init like this 1602678741\_init.mp4. hls\_fmp4\_init\_resend bool Resend init file after m3u8 file refresh every time, default is 0. When var\_stream\_map is set with two or more variant streams, the filename pattern must contain the string "%v", this string specifies the position of variant stream index in the generated init file names. The string "%v" may be present in the filename or in the last directory name containing the file. If the string is present in the directory name, then sub-directories are created after expanding the directory name pattern. This enables creation of init files corresponding to different variant streams in subdirectories. hls\_flags flags Possible values: ‘single\_file’ If this flag is set, the muxer will store all segments in a single MPEG-TS file, and will use byte ranges in the playlist. HLS playlists generated with this way will have the version number 4. For example: ffmpeg -i in.nut -hls\_flags single\_file out.m3u8 will produce the playlist, out.m3u8, and a single segment file, out.ts. ‘delete\_segments’ Segment files removed from the playlist are deleted after a period of time equal to the duration of the segment plus the duration of the playlist. ‘append\_list’ Append new segments into the end of old segment list, and remove the `#EXT-X-ENDLIST` from the old segment list. ‘round\_durations’ Round the duration info in the playlist file segment info to integer values, instead of using floating point. If there are no other features requiring higher HLS versions be used, then this will allow `ffmpeg` to output a HLS version 2 m3u8. ‘discont\_start’ Add the `#EXT-X-DISCONTINUITY` tag to the playlist, before the first segment’s information. ‘omit\_endlist’ Do not append the `EXT-X-ENDLIST` tag at the end of the playlist. ‘periodic\_rekey’ The file specified by `hls_key_info_file` will be checked periodically and detect updates to the encryption info. Be sure to replace this file atomically, including the file containing the AES encryption key. ‘independent\_segments’ Add the `#EXT-X-INDEPENDENT-SEGMENTS` tag to playlists that has video segments and when all the segments of that playlist are guaranteed to start with a key frame. ‘iframes\_only’ Add the `#EXT-X-I-FRAMES-ONLY` tag to playlists that has video segments and can play only I-frames in the `#EXT-X-BYTERANGE` mode. ‘split\_by\_time’ Allow segments to start on frames other than key frames. This improves behavior on some players when the time between key frames is inconsistent, but may make things worse on others, and can cause some oddities during seeking. This flag should be used with the hls\_time option. ‘program\_date\_time’ Generate `EXT-X-PROGRAM-DATE-TIME` tags. ‘second\_level\_segment\_index’ Make it possible to use segment indexes as %%d in the hls\_segment\_filename option expression besides date/time values when strftime option is on. To get fixed width numbers with trailing zeroes, %%0xd format is available where x is the required width. ‘second\_level\_segment\_size’ Make it possible to use segment sizes (counted in bytes) as %%s in hls\_segment\_filename option expression besides date/time values when strftime is on. To get fixed width numbers with trailing zeroes, %%0xs format is available where x is the required width. ‘second\_level\_segment\_duration’ Make it possible to use segment duration (calculated in microseconds) as %%t in hls\_segment\_filename option expression besides date/time values when strftime is on. To get fixed width numbers with trailing zeroes, %%0xt format is available where x is the required width. For example: ffmpeg -i sample.mpeg \\ -f hls -hls\_time 3 -hls\_list\_size 5 \\ -hls\_flags second\_level\_segment\_index+second\_level\_segment\_size+second\_level\_segment\_duration \\ -strftime 1 -strftime\_mkdir 1 -hls\_segment\_filename "segment\_%Y%m%d%H%M%S\_%%04d\_%%08s\_%%013t.ts" stream.m3u8 will produce segments like this: segment\_20170102194334\_0003\_00122200\_0000003000000.ts, segment\_20170102194334\_0004\_00120072\_0000003000000.ts etc. ‘temp\_file’ Write segment data to filename.tmp and rename to filename only once the segment is complete. A webserver serving up segments can be configured to reject requests to \*.tmp to prevent access to in-progress segments before they have been added to the m3u8 playlist. This flag also affects how m3u8 playlist files are created. If this flag is set, all playlist files will be written into a temporary file and renamed after they are complete, similarly as segments are handled. But playlists with `file` protocol and with hls\_playlist\_type type other than ‘vod’ are always written into a temporary file regardless of this flag. Master playlist files specified with master\_pl\_name, if any, with `file` protocol, are always written into temporary file regardless of this flag if master\_pl\_publish\_rate value is other than zero. hls\_playlist\_type type If type is ‘event’, emit `#EXT-X-PLAYLIST-TYPE:EVENT` in the m3u8 header. This forces hls\_list\_size to 0; the playlist can only be appended to. If type is ‘vod’, emit `#EXT-X-PLAYLIST-TYPE:VOD` in the m3u8 header. This forces hls\_list\_size to 0; the playlist must not change. method method Use the given HTTP method to create the hls files. For example: ffmpeg -re -i in.ts -f hls -method PUT http://example.com/live/out.m3u8 will upload all the mpegts segment files to the HTTP server using the HTTP PUT method, and update the m3u8 files every `refresh` times using the same method. Note that the HTTP server must support the given method for uploading files. http\_user\_agent agent Override User-Agent field in HTTP header. Applicable only for HTTP output. var\_stream\_map stream\_map Specify a map string defining how to group the audio, video and subtitle streams into different variant streams. The variant stream groups are separated by space. Expected string format is like this "a:0,v:0 a:1,v:1 ....". Here a:, v:, s: are the keys to specify audio, video and subtitle streams respectively. Allowed values are 0 to 9 (limited just based on practical usage). When there are two or more variant streams, the output filename pattern must contain the string "%v": this string specifies the position of variant stream index in the output media playlist filenames. The string "%v" may be present in the filename or in the last directory name containing the file. If the string is present in the directory name, then sub-directories are created after expanding the directory name pattern. This enables creation of variant streams in subdirectories. A few examples follow. * Create two hls variant streams. The first variant stream will contain video stream of bitrate 1000k and audio stream of bitrate 64k and the second variant stream will contain video stream of bitrate 256k and audio stream of bitrate 32k. Here, two media playlist with file names out\_0.m3u8 and out\_1.m3u8 will be created. ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var\_stream\_map "v:0,a:0 v:1,a:1" \\ http://example.com/live/out\_%v.m3u8 * If you want something meaningful text instead of indexes in result names, you may specify names for each or some of the variants. The following example will create two hls variant streams as in the previous one. But here, the two media playlist with file names out\_my\_hd.m3u8 and out\_my\_sd.m3u8 will be created. ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var\_stream\_map "v:0,a:0,name:my\_hd v:1,a:1,name:my\_sd" \\ http://example.com/live/out\_%v.m3u8 * Create three hls variant streams. The first variant stream will be a video only stream with video bitrate 1000k, the second variant stream will be an audio only stream with bitrate 64k and the third variant stream will be a video only stream with bitrate 256k. Here, three media playlist with file names out\_0.m3u8, out\_1.m3u8 and out\_2.m3u8 will be created. ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k \\ -map 0:v -map 0:a -map 0:v -f hls -var\_stream\_map "v:0 a:0 v:1" \\ http://example.com/live/out\_%v.m3u8 * Create the variant streams in subdirectories. Here, the first media playlist is created at http://example.com/live/vs\_0/out.m3u8 and the second one at http://example.com/live/vs\_1/out.m3u8. ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var\_stream\_map "v:0,a:0 v:1,a:1" \\ http://example.com/live/vs\_%v/out.m3u8 * Create two audio only and two video only variant streams. In addition to the `#EXT-X-STREAM-INF` tag for each variant stream in the master playlist, the `#EXT-X-MEDIA` tag is also added for the two audio only variant streams and they are mapped to the two video only variant streams with audio group names ’aud\_low’ and ’aud\_high’. By default, a single hls variant containing all the encoded streams is created. ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k -b:v:1 3000k \\ -map 0:a -map 0:a -map 0:v -map 0:v -f hls \\ -var\_stream\_map "a:0,agroup:aud\_low a:1,agroup:aud\_high v:0,agroup:aud\_low v:1,agroup:aud\_high" \\ -master\_pl\_name master.m3u8 \\ http://example.com/live/out\_%v.m3u8 * Create two audio only and one video only variant streams. In addition to the `#EXT-X-STREAM-INF` tag for each variant stream in the master playlist, the `#EXT-X-MEDIA` tag is also added for the two audio only variant streams and they are mapped to the one video only variant streams with audio group name ’aud\_low’, and the audio group have default stat is NO or YES. By default, a single hls variant containing all the encoded streams is created. ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k \\ -map 0:a -map 0:a -map 0:v -f hls \\ -var\_stream\_map "a:0,agroup:aud\_low,default:yes a:1,agroup:aud\_low v:0,agroup:aud\_low" \\ -master\_pl\_name master.m3u8 \\ http://example.com/live/out\_%v.m3u8 * Create two audio only and one video only variant streams. In addition to the `#EXT-X-STREAM-INF` tag for each variant stream in the master playlist, the `#EXT-X-MEDIA` tag is also added for the two audio only variant streams and they are mapped to the one video only variant streams with audio group name ’aud\_low’, and the audio group have default stat is NO or YES, and one audio have and language is named ENG, the other audio language is named CHN. By default, a single hls variant containing all the encoded streams is created. ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k \\ -map 0:a -map 0:a -map 0:v -f hls \\ -var\_stream\_map "a:0,agroup:aud\_low,default:yes,language:ENG a:1,agroup:aud\_low,language:CHN v:0,agroup:aud\_low" \\ -master\_pl\_name master.m3u8 \\ http://example.com/live/out\_%v.m3u8 * Create a single variant stream. Add the `#EXT-X-MEDIA` tag with `TYPE=SUBTITLES` in the master playlist with webvtt subtitle group name ’subtitle’ and optional subtitle name, e.g. ’English’. Make sure the input file has one text subtitle stream at least. ffmpeg -y -i input\_with\_subtitle.mkv \\ -b:v:0 5250k -c:v h264 -pix\_fmt yuv420p -profile:v main -level 4.1 \\ -b:a:0 256k \\ -c:s webvtt -c:a mp2 -ar 48000 -ac 2 -map 0:v -map 0:a:0 -map 0:s:0 \\ -f hls -var\_stream\_map "v:0,a:0,s:0,sgroup:subtitle,sname:English" \\ -master\_pl\_name master.m3u8 -t 300 -hls\_time 10 -hls\_init\_time 4 -hls\_list\_size \\ 10 -master\_pl\_publish\_rate 10 -hls\_flags \\ delete\_segments+discont\_start+split\_by\_time ./tmp/video.m3u8 cc\_stream\_map cc\_stream\_map Map string which specifies different closed captions groups and their attributes. The closed captions stream groups are separated by space. Expected string format is like this "ccgroup:<group name>,instreamid:<INSTREAM-ID>,language:<language code> ....". ’ccgroup’ and ’instreamid’ are mandatory attributes. ’language’ is an optional attribute. The closed captions groups configured using this option are mapped to different variant streams by providing the same ’ccgroup’ name in the var\_stream\_map string. For example: ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \\ -a53cc:0 1 -a53cc:1 1 \\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls \\ -cc\_stream\_map "ccgroup:cc,instreamid:CC1,language:en ccgroup:cc,instreamid:CC2,language:sp" \\ -var\_stream\_map "v:0,a:0,ccgroup:cc v:1,a:1,ccgroup:cc" \\ -master\_pl\_name master.m3u8 \\ http://example.com/live/out\_%v.m3u8 will add two `#EXT-X-MEDIA` tags with `TYPE=CLOSED-CAPTIONS` in the master playlist for the INSTREAM-IDs ’CC1’ and ’CC2’. Also, it will add `CLOSED-CAPTIONS` attribute with group name ’cc’ for the two output variant streams. If var\_stream\_map is not set, then the first available ccgroup in cc\_stream\_map is mapped to the output variant stream. For example: ffmpeg -re -i in.ts -b:v 1000k -b:a 64k -a53cc 1 -f hls \\ -cc\_stream\_map "ccgroup:cc,instreamid:CC1,language:en" \\ -master\_pl\_name master.m3u8 \\ http://example.com/live/out.m3u8 this will add `#EXT-X-MEDIA` tag with `TYPE=CLOSED-CAPTIONS` in the master playlist with group name ’cc’, language ’en’ (english) and INSTREAM-ID ’CC1’. Also, it will add `CLOSED-CAPTIONS` attribute with group name ’cc’ for the output variant stream. master\_pl\_name name Create HLS master playlist with the given name. For example: ffmpeg -re -i in.ts -f hls -master\_pl\_name master.m3u8 http://example.com/live/out.m3u8 creates an HLS master playlist with name master.m3u8 which is published at http://example.com/live/. master\_pl\_publish\_rate count Publish master play list repeatedly every after specified number of segment intervals. For example: ffmpeg -re -i in.ts -f hls -master\_pl\_name master.m3u8 \\ -hls\_time 2 -master\_pl\_publish\_rate 30 http://example.com/live/out.m3u8 creates an HLS master playlist with name master.m3u8 and keeps publishing it repeatedly every after 30 segments i.e. every after 60s. http\_persistent bool Use persistent HTTP connections. Applicable only for HTTP output. timeout timeout Set timeout for socket I/O operations. Applicable only for HTTP output. ignore\_io\_errors bool Ignore IO errors during open, write and delete. Useful for long-duration runs with network output. headers headers Set custom HTTP headers, can override built in default headers. Applicable only for HTTP output. ### 21.47 iamf Immersive Audio Model and Formats (IAMF) muxer. IAMF is used to provide immersive audio content for presentation on a wide range of devices in both streaming and offline applications. These applications include internet audio streaming, multicasting/broadcasting services, file download, gaming, communication, virtual and augmented reality, and others. In these applications, audio may be played back on a wide range of devices, e.g., headphones, mobile phones, tablets, TVs, sound bars, home theater systems, and big screens. This format was promoted and desgined by Alliance for Open Media. For more information about this format, see https://aomedia.org/iamf/. ### 21.48 ico ICO file muxer. Microsoft’s icon file format (ICO) has some strict limitations that should be noted: * Size cannot exceed 256 pixels in any dimension * Only BMP and PNG images can be stored * If a BMP image is used, it must be one of the following pixel formats: BMP Bit Depth FFmpeg Pixel Format 1bit pal8 4bit pal8 8bit pal8 16bit rgb555le 24bit bgr24 32bit bgra * If a BMP image is used, it must use the BITMAPINFOHEADER DIB header * If a PNG image is used, it must use the rgba pixel format ### 21.49 ilbc Internet Low Bitrate Codec (iLBC) raw muxer. It accepts a single ‘ilbc’ audio stream. ### 21.50 image2, image2pipe Image file muxer. The ‘image2’ muxer writes video frames to image files. The output filenames are specified by a pattern, which can be used to produce sequentially numbered series of files. The pattern may contain the string "%d" or "%0Nd", this string specifies the position of the characters representing a numbering in the filenames. If the form "%0Nd" is used, the string representing the number in each filename is 0-padded to N digits. The literal character ’%’ can be specified in the pattern with the string "%%". If the pattern contains "%d" or "%0Nd", the first filename of the file list specified will contain the number 1, all the following numbers will be sequential. The pattern may contain a suffix which is used to automatically determine the format of the image files to write. For example the pattern "img-%03d.bmp" will specify a sequence of filenames of the form img-001.bmp, img-002.bmp, ..., img-010.bmp, etc. The pattern "img%%-%d.jpg" will specify a sequence of filenames of the form img%-1.jpg, img%-2.jpg, ..., img%-10.jpg, etc. The image muxer supports the .Y.U.V image file format. This format is special in that each image frame consists of three files, for each of the YUV420P components. To read or write this image file format, specify the name of the ’.Y’ file. The muxer will automatically open the ’.U’ and ’.V’ files as required. The ‘image2pipe’ muxer accepts the same options as the ‘image2’ muxer, but ignores the pattern verification and expansion, as it is supposed to write to the command output rather than to an actual stored file. #### 21.50.1 Options frame\_pts bool If set to 1, expand the filename with the packet PTS (presentation time stamp). Default value is 0. start\_number count Start the sequence from the specified number. Default value is 1. update bool If set to 1, the filename will always be interpreted as just a filename, not a pattern, and the corresponding file will be continuously overwritten with new images. Default value is 0. strftime bool If set to 1, expand the filename with date and time information from `strftime()`. Default value is 0. atomic\_writing bool Write output to a temporary file, which is renamed to target filename once writing is completed. Default is disabled. protocol\_opts options\_list Set protocol options as a :-separated list of key=value parameters. Values containing the `:` special character must be escaped. #### 21.50.2 Examples * Use `ffmpeg` for creating a sequence of files img-001.jpeg, img-002.jpeg, ..., taking one image every second from the input video: ffmpeg -i in.avi -vsync cfr -r 1 -f image2 'img-%03d.jpeg' Note that with `ffmpeg`, if the format is not specified with the `-f` option and the output filename specifies an image file format, the image2 muxer is automatically selected, so the previous command can be written as: ffmpeg -i in.avi -vsync cfr -r 1 'img-%03d.jpeg' Note also that the pattern must not necessarily contain "%d" or "%0Nd", for example to create a single image file img.jpeg from the start of the input video you can employ the command: ffmpeg -i in.avi -f image2 -frames:v 1 img.jpeg * The strftime option allows you to expand the filename with date and time information. Check the documentation of the `strftime()` function for the syntax. To generate image files from the `strftime()` "%Y-%m-%d\_%H-%M-%S" pattern, the following `ffmpeg` command can be used: ffmpeg -f v4l2 -r 1 -i /dev/video0 -f image2 -strftime 1 "%Y-%m-%d\_%H-%M-%S.jpg" * Set the file name with current frame’s PTS: ffmpeg -f v4l2 -r 1 -i /dev/video0 -copyts -f image2 -frame\_pts true %d.jpg * Publish contents of your desktop directly to a WebDAV server every second: ffmpeg -f x11grab -framerate 1 -i :0.0 -q:v 6 -update 1 -protocol\_opts method=PUT http://example.com/desktop.jpg ### 21.51 ircam Berkeley / IRCAM / CARL Sound Filesystem (BICSF) format muxer. The Berkeley/IRCAM/CARL Sound Format, developed in the 1980s, is a result of the merging of several different earlier sound file formats and systems including the csound system developed by Dr Gareth Loy at the Computer Audio Research Lab (CARL) at UC San Diego, the IRCAM sound file system developed by Rob Gross and Dan Timis at the Institut de Recherche et Coordination Acoustique / Musique in Paris and the Berkeley Fast Filesystem. It was developed initially as part of the Berkeley/IRCAM/CARL Sound Filesystem, a suite of programs designed to implement a filesystem for audio applications running under Berkeley UNIX. It was particularly popular in academic music research centres, and was used a number of times in the creation of early computer-generated compositions. This muxer accepts a single audio stream containing PCM data. ### 21.52 ivf On2 IVF muxer. IVF was developed by On2 Technologies (formerly known as Duck Corporation), to store internally developed codecs. This muxer accepts a single ‘vp8’, ‘vp9’, or ‘av1’ video stream. ### 21.53 jacosub JACOsub subtitle format muxer. This muxer accepts a single ‘jacosub’ subtitles stream. For more information about the format, see http://unicorn.us.com/jacosub/jscripts.html. ### 21.54 kvag Simon & Schuster Interactive VAG muxer. This custom VAG container is used by some Simon & Schuster Interactive games such as "Real War", and "Real War: Rogue States". This muxer accepts a single ‘adpcm\_ima\_ssi’ audio stream. ### 21.55 lc3 Bluetooth SIG Low Complexity Communication Codec audio (LC3), or ETSI TS 103 634 Low Complexity Communication Codec plus (LC3plus). This muxer accepts a single ‘lc3’ audio stream. ### 21.56 lrc LRC lyrics file format muxer. LRC (short for LyRiCs) is a computer file format that synchronizes song lyrics with an audio file, such as MP3, Vorbis, or MIDI. This muxer accepts a single ‘subrip’ or ‘text’ subtitles stream. #### 21.56.1 Metadata The following metadata tags are converted to the format corresponding metadata: title album artist author creator encoder encoder\_version If ‘encoder\_version’ is not explicitly set, it is automatically set to the libavformat version. ### 21.57 matroska Matroska container muxer. This muxer implements the matroska and webm container specs. #### 21.57.1 Metadata The recognized metadata settings in this muxer are: title Set title name provided to a single track. This gets mapped to the FileDescription element for a stream written as attachment. language Specify the language of the track in the Matroska languages form. The language can be either the 3 letters bibliographic ISO-639-2 (ISO 639-2/B) form (like "fre" for French), or a language code mixed with a country code for specialities in languages (like "fre-ca" for Canadian French). stereo\_mode Set stereo 3D video layout of two views in a single video track. The following values are recognized: ‘mono’ video is not stereo ‘left\_right’ Both views are arranged side by side, Left-eye view is on the left ‘bottom\_top’ Both views are arranged in top-bottom orientation, Left-eye view is at bottom ‘top\_bottom’ Both views are arranged in top-bottom orientation, Left-eye view is on top ‘checkerboard\_rl’ Each view is arranged in a checkerboard interleaved pattern, Left-eye view being first ‘checkerboard\_lr’ Each view is arranged in a checkerboard interleaved pattern, Right-eye view being first ‘row\_interleaved\_rl’ Each view is constituted by a row based interleaving, Right-eye view is first row ‘row\_interleaved\_lr’ Each view is constituted by a row based interleaving, Left-eye view is first row ‘col\_interleaved\_rl’ Both views are arranged in a column based interleaving manner, Right-eye view is first column ‘col\_interleaved\_lr’ Both views are arranged in a column based interleaving manner, Left-eye view is first column ‘anaglyph\_cyan\_red’ All frames are in anaglyph format viewable through red-cyan filters ‘right\_left’ Both views are arranged side by side, Right-eye view is on the left ‘anaglyph\_green\_magenta’ All frames are in anaglyph format viewable through green-magenta filters ‘block\_lr’ Both eyes laced in one Block, Left-eye view is first ‘block\_rl’ Both eyes laced in one Block, Right-eye view is first For example a 3D WebM clip can be created using the following command line: ffmpeg -i sample\_left\_right\_clip.mpg -an -c:v libvpx -metadata stereo\_mode=left\_right -y stereo\_clip.webm #### 21.57.2 Options reserve\_index\_space size By default, this muxer writes the index for seeking (called cues in Matroska terms) at the end of the file, because it cannot know in advance how much space to leave for the index at the beginning of the file. However for some use cases – e.g. streaming where seeking is possible but slow – it is useful to put the index at the beginning of the file. If this option is set to a non-zero value, the muxer will reserve size bytes of space in the file header and then try to write the cues there when the muxing finishes. If the reserved space does not suffice, no Cues will be written, the file will be finalized and writing the trailer will return an error. A safe size for most use cases should be about 50kB per hour of video. Note that cues are only written if the output is seekable and this option will have no effect if it is not. cues\_to\_front bool If set, the muxer will write the index at the beginning of the file by shifting the main data if necessary. This can be combined with reserve\_index\_space in which case the data is only shifted if the initially reserved space turns out to be insufficient. This option is ignored if the output is unseekable. cluster\_size\_limit size Store at most the provided amount of bytes in a cluster. If not specified, the limit is set automatically to a sensible hardcoded fixed value. cluster\_time\_limit duration Store at most the provided number of milliseconds in a cluster. If not specified, the limit is set automatically to a sensible hardcoded fixed value. dash bool Create a WebM file conforming to WebM DASH specification. By default it is set to `false`. dash\_track\_number index Track number for the DASH stream. By default it is set to `1`. live bool Write files assuming it is a live stream. By default it is set to `false`. allow\_raw\_vfw bool Allow raw VFW mode. By default it is set to `false`. flipped\_raw\_rgb bool If set to `true`, store positive height for raw RGB bitmaps, which indicates bitmap is stored bottom-up. Note that this option does not flip the bitmap which has to be done manually beforehand, e.g. by using the ‘vflip’ filter. Default is `false` and indicates bitmap is stored top down. write\_crc32 bool Write a CRC32 element inside every Level 1 element. By default it is set to `true`. This option is ignored for WebM. default\_mode mode Control how the FlagDefault of the output tracks will be set. It influences which tracks players should play by default. The default mode is ‘passthrough’. ‘infer’ Every track with disposition default will have the FlagDefault set. Additionally, for each type of track (audio, video or subtitle), if no track with disposition default of this type exists, then the first track of this type will be marked as default (if existing). This ensures that the default flag is set in a sensible way even if the input originated from containers that lack the concept of default tracks. ‘infer\_no\_subs’ This mode is the same as infer except that if no subtitle track with disposition default exists, no subtitle track will be marked as default. ‘passthrough’ In this mode the FlagDefault is set if and only if the AV\_DISPOSITION\_DEFAULT flag is set in the disposition of the corresponding stream. ### 21.58 md5 MD5 testing format. This is a variant of the hash muxer. Unlike that muxer, it defaults to using the MD5 hash function. See also the hash and framemd5 muxers. #### 21.58.1 Examples * To compute the MD5 hash of the input converted to raw audio and video, and store it in the file out.md5: ffmpeg -i INPUT -f md5 out.md5 * To print the MD5 hash to stdout: ffmpeg -i INPUT -f md5 - ### 21.59 microdvd MicroDVD subtitle format muxer. This muxer accepts a single ‘microdvd’ subtitles stream. ### 21.60 mmf Synthetic music Mobile Application Format (SMAF) format muxer. SMAF is a music data format specified by Yamaha for portable electronic devices, such as mobile phones and personal digital assistants. This muxer accepts a single ‘adpcm\_yamaha’ audio stream. ### 21.61 mp3 The MP3 muxer writes a raw MP3 stream with the following optional features: * An ID3v2 metadata header at the beginning (enabled by default). Versions 2.3 and 2.4 are supported, the `id3v2_version` private option controls which one is used (3 or 4). Setting `id3v2_version` to 0 disables the ID3v2 header completely. The muxer supports writing attached pictures (APIC frames) to the ID3v2 header. The pictures are supplied to the muxer in form of a video stream with a single packet. There can be any number of those streams, each will correspond to a single APIC frame. The stream metadata tags title and comment map to APIC description and picture type respectively. See http://id3.org/id3v2.4.0-frames for allowed picture types. Note that the APIC frames must be written at the beginning, so the muxer will buffer the audio frames until it gets all the pictures. It is therefore advised to provide the pictures as soon as possible to avoid excessive buffering. * A Xing/LAME frame right after the ID3v2 header (if present). It is enabled by default, but will be written only if the output is seekable. The `write_xing` private option can be used to disable it. The frame contains various information that may be useful to the decoder, like the audio duration or encoder delay. * A legacy ID3v1 tag at the end of the file (disabled by default). It may be enabled with the `write_id3v1` private option, but as its capabilities are very limited, its usage is not recommended. Examples: Write an mp3 with an ID3v2.3 header and an ID3v1 footer: ffmpeg -i INPUT -id3v2\_version 3 -write\_id3v1 1 out.mp3 To attach a picture to an mp3 file select both the audio and the picture stream with `map`: ffmpeg -i input.mp3 -i cover.png -c copy -map 0 -map 1 -metadata:s:v title="Album cover" -metadata:s:v comment="Cover (Front)" out.mp3 Write a "clean" MP3 without any extra features: ffmpeg -i input.wav -write\_xing 0 -id3v2\_version 0 out.mp3 ### 21.62 mpegts MPEG transport stream muxer. This muxer implements ISO 13818-1 and part of ETSI EN 300 468. The recognized metadata settings in mpegts muxer are `service_provider` and `service_name`. If they are not set the default for `service_provider` is ‘FFmpeg’ and the default for `service_name` is ‘Service01’. #### 21.62.1 Options The muxer options are: mpegts\_transport\_stream\_id integer Set the ‘transport\_stream\_id’. This identifies a transponder in DVB. Default is `0x0001`. mpegts\_original\_network\_id integer Set the ‘original\_network\_id’. This is unique identifier of a network in DVB. Its main use is in the unique identification of a service through the path ‘Original\_Network\_ID, Transport\_Stream\_ID’. Default is `0x0001`. mpegts\_service\_id integer Set the ‘service\_id’, also known as program in DVB. Default is `0x0001`. mpegts\_service\_type integer Set the program ‘service\_type’. Default is `digital_tv`. Accepts the following options: ‘hex\_value’ Any hexadecimal value between `0x01` and `0xff` as defined in ETSI 300 468. ‘digital\_tv’ Digital TV service. ‘digital\_radio’ Digital Radio service. ‘teletext’ Teletext service. ‘advanced\_codec\_digital\_radio’ Advanced Codec Digital Radio service. ‘mpeg2\_digital\_hdtv’ MPEG2 Digital HDTV service. ‘advanced\_codec\_digital\_sdtv’ Advanced Codec Digital SDTV service. ‘advanced\_codec\_digital\_hdtv’ Advanced Codec Digital HDTV service. mpegts\_pmt\_start\_pid integer Set the first PID for PMTs. Default is `0x1000`, minimum is `0x0020`, maximum is `0x1ffa`. This option has no effect in m2ts mode where the PMT PID is fixed `0x0100`. mpegts\_start\_pid integer Set the first PID for elementary streams. Default is `0x0100`, minimum is `0x0020`, maximum is `0x1ffa`. This option has no effect in m2ts mode where the elementary stream PIDs are fixed. mpegts\_m2ts\_mode boolean Enable m2ts mode if set to `1`. Default value is `-1` which disables m2ts mode. muxrate integer Set a constant muxrate. Default is VBR. pes\_payload\_size integer Set minimum PES packet payload in bytes. Default is `2930`. mpegts\_flags flags Set mpegts flags. Accepts the following options: ‘resend\_headers’ Reemit PAT/PMT before writing the next packet. ‘latm’ Use LATM packetization for AAC. ‘pat\_pmt\_at\_frames’ Reemit PAT and PMT at each video frame. ‘system\_b’ Conform to System B (DVB) instead of System A (ATSC). ‘initial\_discontinuity’ Mark the initial packet of each stream as discontinuity. ‘nit’ Emit NIT table. ‘omit\_rai’ Disable writing of random access indicator. mpegts\_copyts boolean Preserve original timestamps, if value is set to `1`. Default value is `-1`, which results in shifting timestamps so that they start from 0. omit\_video\_pes\_length boolean Omit the PES packet length for video packets. Default is `1` (true). pcr\_period integer Override the default PCR retransmission time in milliseconds. Default is `-1` which means that the PCR interval will be determined automatically: 20 ms is used for CBR streams, the highest multiple of the frame duration which is less than 100 ms is used for VBR streams. pat\_period duration Maximum time in seconds between PAT/PMT tables. Default is `0.1`. sdt\_period duration Maximum time in seconds between SDT tables. Default is `0.5`. nit\_period duration Maximum time in seconds between NIT tables. Default is `0.5`. tables\_version integer Set PAT, PMT, SDT and NIT version (default `0`, valid values are from 0 to 31, inclusively). This option allows updating stream structure so that standard consumer may detect the change. To do so, reopen output `AVFormatContext` (in case of API usage) or restart `ffmpeg` instance, cyclically changing tables\_version value: ffmpeg -i source1.ts -codec copy -f mpegts -tables\_version 0 udp://1.1.1.1:1111 ffmpeg -i source2.ts -codec copy -f mpegts -tables\_version 1 udp://1.1.1.1:1111 ... ffmpeg -i source3.ts -codec copy -f mpegts -tables\_version 31 udp://1.1.1.1:1111 ffmpeg -i source1.ts -codec copy -f mpegts -tables\_version 0 udp://1.1.1.1:1111 ffmpeg -i source2.ts -codec copy -f mpegts -tables\_version 1 udp://1.1.1.1:1111 ... #### 21.62.2 Example ffmpeg -i file.mpg -c copy \\ -mpegts\_original\_network\_id 0x1122 \\ -mpegts\_transport\_stream\_id 0x3344 \\ -mpegts\_service\_id 0x5566 \\ -mpegts\_pmt\_start\_pid 0x1500 \\ -mpegts\_start\_pid 0x150 \\ -metadata service\_provider="Some provider" \\ -metadata service\_name="Some Channel" \\ out.ts ### 21.63 mxf, mxf\_d10, mxf\_opatom MXF muxer. #### 21.63.1 Options The muxer options are: store\_user\_comments bool Set if user comments should be stored if available or never. IRT D-10 does not allow user comments. The default is thus to write them for mxf and mxf\_opatom but not for mxf\_d10 ### 21.64 null Null muxer. This muxer does not generate any output file, it is mainly useful for testing or benchmarking purposes. For example to benchmark decoding with `ffmpeg` you can use the command: ffmpeg -benchmark -i INPUT -f null out.null Note that the above command does not read or write the out.null file, but specifying the output file is required by the `ffmpeg` syntax. Alternatively you can write the command as: ffmpeg -benchmark -i INPUT -f null - ### 21.65 nut \-syncpoints flags Change the syncpoint usage in nut: default use the normal low-overhead seeking aids. none do not use the syncpoints at all, reducing the overhead but making the stream non-seekable; Use of this option is not recommended, as the resulting files are very damage sensitive and seeking is not possible. Also in general the overhead from syncpoints is negligible. Note, -`write_index` 0 can be used to disable all growing data tables, allowing to mux endless streams with limited memory and without these disadvantages. timestamped extend the syncpoint with a wallclock field. The none and timestamped flags are experimental. \-write\_index bool Write index at the end, the default is to write an index. ffmpeg -i INPUT -f\_strict experimental -syncpoints none - | processor ### 21.66 ogg Ogg container muxer. \-page\_duration duration Preferred page duration, in microseconds. The muxer will attempt to create pages that are approximately duration microseconds long. This allows the user to compromise between seek granularity and container overhead. The default is 1 second. A value of 0 will fill all segments, making pages as large as possible. A value of 1 will effectively use 1 packet-per-page in most situations, giving a small seek granularity at the cost of additional container overhead. \-serial\_offset value Serial value from which to set the streams serial number. Setting it to different and sufficiently large values ensures that the produced ogg files can be safely chained. ### 21.67 rcwt RCWT (Raw Captions With Time) is a format native to ccextractor, a commonly used open source tool for processing 608/708 Closed Captions (CC) sources. It can be used to archive the original extracted CC bitstream and to produce a source file for later processing or conversion. The format allows for interoperability between ccextractor and FFmpeg, is simple to parse, and can be used to create a backup of the CC presentation. This muxer implements the specification as of March 2024, which has been stable and unchanged since April 2014. This muxer will have some nuances from the way that ccextractor muxes RCWT. No compatibility issues when processing the output with ccextractor have been observed as a result of this so far, but mileage may vary and outputs will not be a bit-exact match. A free specification of RCWT can be found here: https://github.com/CCExtractor/ccextractor/blob/master/docs/BINARY\_FILE\_FORMAT.TXT #### 21.67.1 Examples * Extract Closed Captions to RCWT using lavfi: ffmpeg -f lavfi -i "movie=INPUT.mkv\[out+subcc\]" -map 0:s:0 -c:s copy -f rcwt CC.rcwt.bin ### 21.68 segment, stream\_segment, ssegment Basic stream segmenter. This muxer outputs streams to a number of separate files of nearly fixed duration. Output filename pattern can be set in a fashion similar to image2, or by using a `strftime` template if the strftime option is enabled. `stream_segment` is a variant of the muxer used to write to streaming output formats, i.e. which do not require global headers, and is recommended for outputting e.g. to MPEG transport stream segments. `ssegment` is a shorter alias for `stream_segment`. Every segment starts with a keyframe of the selected reference stream, which is set through the reference\_stream option. Note that if you want accurate splitting for a video file, you need to make the input key frames correspond to the exact splitting times expected by the segmenter, or the segment muxer will start the new segment with the key frame found next after the specified start time. The segment muxer works best with a single constant frame rate video. Optionally it can generate a list of the created segments, by setting the option segment\_list. The list type is specified by the segment\_list\_type option. The entry filenames in the segment list are set by default to the basename of the corresponding segment files. See also the hls muxer, which provides a more specific implementation for HLS segmentation. #### 21.68.1 Options The segment muxer supports the following options: increment\_tc 1|0 if set to `1`, increment timecode between each segment If this is selected, the input need to have a timecode in the first video stream. Default value is `0`. reference\_stream specifier Set the reference stream, as specified by the string specifier. If specifier is set to `auto`, the reference is chosen automatically. Otherwise it must be a stream specifier (see the “Stream specifiers” chapter in the ffmpeg manual) which specifies the reference stream. The default value is `auto`. segment\_format format Override the inner container format, by default it is guessed by the filename extension. segment\_format\_options options\_list Set output format options using a :-separated list of key=value parameters. Values containing the `:` special character must be escaped. segment\_list name Generate also a listfile named name. If not specified no listfile is generated. segment\_list\_flags flags Set flags affecting the segment list generation. It currently supports the following flags: ‘cache’ Allow caching (only affects M3U8 list files). ‘live’ Allow live-friendly file generation. segment\_list\_size size Update the list file so that it contains at most size segments. If 0 the list file will contain all the segments. Default value is 0. segment\_list\_entry\_prefix prefix Prepend prefix to each entry. Useful to generate absolute paths. By default no prefix is applied. segment\_list\_type type Select the listing format. The following values are recognized: ‘flat’ Generate a flat list for the created segments, one segment per line. ‘csv, ext’ Generate a list for the created segments, one segment per line, each line matching the format (comma-separated values): segment\_filename,segment\_start\_time,segment\_end\_time segment\_filename is the name of the output file generated by the muxer according to the provided pattern. CSV escaping (according to RFC4180) is applied if required. segment\_start\_time and segment\_end\_time specify the segment start and end time expressed in seconds. A list file with the suffix `".csv"` or `".ext"` will auto-select this format. ‘ext’ is deprecated in favor or ‘csv’. ‘ffconcat’ Generate an ffconcat file for the created segments. The resulting file can be read using the FFmpeg concat demuxer. A list file with the suffix `".ffcat"` or `".ffconcat"` will auto-select this format. ‘m3u8’ Generate an extended M3U8 file, version 3, compliant with http://tools.ietf.org/id/draft-pantos-http-live-streaming. A list file with the suffix `".m3u8"` will auto-select this format. If not specified the type is guessed from the list file name suffix. segment\_time time Set segment duration to time, the value must be a duration specification. Default value is "2". See also the segment\_times option. Note that splitting may not be accurate, unless you force the reference stream key-frames at the given time. See the introductory notice and the examples below. min\_seg\_duration time Set minimum segment duration to time, the value must be a duration specification. This prevents the muxer ending segments at a duration below this value. Only effective with `segment_time`. Default value is "0". segment\_atclocktime 1|0 If set to "1" split at regular clock time intervals starting from 00:00 o’clock. The time value specified in segment\_time is used for setting the length of the splitting interval. For example with segment\_time set to "900" this makes it possible to create files at 12:00 o’clock, 12:15, 12:30, etc. Default value is "0". segment\_clocktime\_offset duration Delay the segment splitting times with the specified duration when using segment\_atclocktime. For example with segment\_time set to "900" and segment\_clocktime\_offset set to "300" this makes it possible to create files at 12:05, 12:20, 12:35, etc. Default value is "0". segment\_clocktime\_wrap\_duration duration Force the segmenter to only start a new segment if a packet reaches the muxer within the specified duration after the segmenting clock time. This way you can make the segmenter more resilient to backward local time jumps, such as leap seconds or transition to standard time from daylight savings time. Default is the maximum possible duration which means starting a new segment regardless of the elapsed time since the last clock time. segment\_time\_delta delta Specify the accuracy time when selecting the start time for a segment, expressed as a duration specification. Default value is "0". When delta is specified a key-frame will start a new segment if its PTS satisfies the relation: PTS >= start\_time - time\_delta This option is useful when splitting video content, which is always split at GOP boundaries, in case a key frame is found just before the specified split time. In particular may be used in combination with the ffmpeg option force\_key\_frames. The key frame times specified by force\_key\_frames may not be set accurately because of rounding issues, with the consequence that a key frame time may result set just before the specified time. For constant frame rate videos a value of 1/(2\*frame\_rate) should address the worst case mismatch between the specified time and the time set by force\_key\_frames. segment\_times times Specify a list of split points. times contains a list of comma separated duration specifications, in increasing order. See also the segment\_time option. segment\_frames frames Specify a list of split video frame numbers. frames contains a list of comma separated integer numbers, in increasing order. This option specifies to start a new segment whenever a reference stream key frame is found and the sequential number (starting from 0) of the frame is greater or equal to the next value in the list. segment\_wrap limit Wrap around segment index once it reaches limit. segment\_start\_number number Set the sequence number of the first segment. Defaults to `0`. strftime 1|0 Use the `strftime` function to define the name of the new segments to write. If this is selected, the output segment name must contain a `strftime` function template. Default value is `0`. break\_non\_keyframes 1|0 If enabled, allow segments to start on frames other than keyframes. This improves behavior on some players when the time between keyframes is inconsistent, but may make things worse on others, and can cause some oddities during seeking. Defaults to `0`. reset\_timestamps 1|0 Reset timestamps at the beginning of each segment, so that each segment will start with near-zero timestamps. It is meant to ease the playback of the generated segments. May not work with some combinations of muxers/codecs. It is set to `0` by default. initial\_offset offset Specify timestamp offset to apply to the output packet timestamps. The argument must be a time duration specification, and defaults to 0. write\_empty\_segments 1|0 If enabled, write an empty segment if there are no packets during the period a segment would usually span. Otherwise, the segment will be filled with the next packet written. Defaults to `0`. Make sure to require a closed GOP when encoding and to set the GOP size to fit your segment time constraint. #### 21.68.2 Examples * Remux the content of file in.mkv to a list of segments out-000.nut, out-001.nut, etc., and write the list of generated segments to out.list: ffmpeg -i in.mkv -codec hevc -flags +cgop -g 60 -map 0 -f segment -segment\_list out.list out%03d.nut * Segment input and set output format options for the output segments: ffmpeg -i in.mkv -f segment -segment\_time 10 -segment\_format\_options movflags=+faststart out%03d.mp4 * Segment the input file according to the split points specified by the segment\_times option: ffmpeg -i in.mkv -codec copy -map 0 -f segment -segment\_list out.csv -segment\_times 1,2,3,5,8,13,21 out%03d.nut * Use the `ffmpeg` force\_key\_frames option to force key frames in the input at the specified location, together with the segment option segment\_time\_delta to account for possible roundings operated when setting key frame times. ffmpeg -i in.mkv -force\_key\_frames 1,2,3,5,8,13,21 -codec:v mpeg4 -codec:a pcm\_s16le -map 0 \\ -f segment -segment\_list out.csv -segment\_times 1,2,3,5,8,13,21 -segment\_time\_delta 0.05 out%03d.nut In order to force key frames on the input file, transcoding is required. * Segment the input file by splitting the input file according to the frame numbers sequence specified with the segment\_frames option: ffmpeg -i in.mkv -codec copy -map 0 -f segment -segment\_list out.csv -segment\_frames 100,200,300,500,800 out%03d.nut * Convert the in.mkv to TS segments using the `libx264` and `aac` encoders: ffmpeg -i in.mkv -map 0 -codec:v libx264 -codec:a aac -f ssegment -segment\_list out.list out%03d.ts * Segment the input file, and create an M3U8 live playlist (can be used as live HLS source): ffmpeg -re -i in.mkv -codec copy -map 0 -f segment -segment\_list playlist.m3u8 \\ -segment\_list\_flags +live -segment\_time 10 out%03d.mkv ### 21.69 smoothstreaming Smooth Streaming muxer generates a set of files (Manifest, chunks) suitable for serving with conventional web server. window\_size Specify the number of fragments kept in the manifest. Default 0 (keep all). extra\_window\_size Specify the number of fragments kept outside of the manifest before removing from disk. Default 5. lookahead\_count Specify the number of lookahead fragments. Default 2. min\_frag\_duration Specify the minimum fragment duration (in microseconds). Default 5000000. remove\_at\_exit Specify whether to remove all fragments when finished. Default 0 (do not remove). ### 21.70 streamhash Per stream hash testing format. This muxer computes and prints a cryptographic hash of all the input frames, on a per-stream basis. This can be used for equality checks without having to do a complete binary comparison. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the hash, but the output of explicit conversions to other codecs can also be used. Timestamps are ignored. It uses the SHA-256 cryptographic hash function by default, but supports several other algorithms. The output of the muxer consists of one line per stream of the form: streamindex,streamtype,algo\=hash, where streamindex is the index of the mapped stream, streamtype is a single character indicating the type of stream, algo is a short string representing the hash function used, and hash is a hexadecimal number representing the computed hash. hash algorithm Use the cryptographic hash function specified by the string algorithm. Supported values include `MD5`, `murmur3`, `RIPEMD128`, `RIPEMD160`, `RIPEMD256`, `RIPEMD320`, `SHA160`, `SHA224`, `SHA256` (default), `SHA512/224`, `SHA512/256`, `SHA384`, `SHA512`, `CRC32` and `adler32`. #### 21.70.1 Examples To compute the SHA-256 hash of the input converted to raw audio and video, and store it in the file out.sha256: ffmpeg -i INPUT -f streamhash out.sha256 To print an MD5 hash to stdout use the command: ffmpeg -i INPUT -f streamhash -hash md5 - See also the hash and framehash muxers. ### 21.71 tee The tee muxer can be used to write the same data to several outputs, such as files or streams. It can be used, for example, to stream a video over a network and save it to disk at the same time. It is different from specifying several outputs to the `ffmpeg` command-line tool. With the tee muxer, the audio and video data will be encoded only once. With conventional multiple outputs, multiple encoding operations in parallel are initiated, which can be a very expensive process. The tee muxer is not useful when using the libavformat API directly because it is then possible to feed the same packets to several muxers directly. Since the tee muxer does not represent any particular output format, ffmpeg cannot auto-select output streams. So all streams intended for output must be specified using `-map`. See the examples below. Some encoders may need different options depending on the output format; the auto-detection of this can not work with the tee muxer, so they need to be explicitly specified. The main example is the global\_header flag. The slave outputs are specified in the file name given to the muxer, separated by ’|’. If any of the slave name contains the ’|’ separator, leading or trailing spaces or any special character, those must be escaped (see (ffmpeg-utils)the "Quoting and escaping" section in the ffmpeg-utils(1) manual). #### 21.71.1 Options use\_fifo bool If set to 1, slave outputs will be processed in separate threads using the fifo muxer. This allows to compensate for different speed/latency/reliability of outputs and setup transparent recovery. By default this feature is turned off. fifo\_options Options to pass to fifo pseudo-muxer instances. See fifo. Muxer options can be specified for each slave by prepending them as a list of key\=value pairs separated by ’:’, between square brackets. If the options values contain a special character or the ’:’ separator, they must be escaped; note that this is a second level escaping. The following special options are also recognized: f Specify the format name. Required if it cannot be guessed from the output URL. bsfs\[/spec\] Specify a list of bitstream filters to apply to the specified output. It is possible to specify to which streams a given bitstream filter applies, by appending a stream specifier to the option separated by `/`. spec must be a stream specifier (see Format stream specifiers). If the stream specifier is not specified, the bitstream filters will be applied to all streams in the output. This will cause that output operation to fail if the output contains streams to which the bitstream filter cannot be applied e.g. `h264_mp4toannexb` being applied to an output containing an audio stream. Options for a bitstream filter must be specified in the form of `opt=value`. Several bitstream filters can be specified, separated by ",". use\_fifo bool This allows to override tee muxer use\_fifo option for individual slave muxer. fifo\_options This allows to override tee muxer fifo\_options for individual slave muxer. See fifo. select Select the streams that should be mapped to the slave output, specified by a stream specifier. If not specified, this defaults to all the mapped streams. This will cause that output operation to fail if the output format does not accept all mapped streams. You may use multiple stream specifiers separated by commas (`,`) e.g.: `a:0,v` onfail Specify behaviour on output failure. This can be set to either `abort` (which is default) or `ignore`. `abort` will cause whole process to fail in case of failure on this slave output. `ignore` will ignore failure on this output, so other outputs will continue without being affected. #### 21.71.2 Examples * Encode something and both archive it in a WebM file and stream it as MPEG-TS over UDP: ffmpeg -i ... -c:v libx264 -c:a mp2 -f tee -map 0:v -map 0:a "archive-20121107.mkv|\[f=mpegts\]udp://10.0.1.255:1234/" * As above, but continue streaming even if output to local file fails (for example local drive fills up): ffmpeg -i ... -c:v libx264 -c:a mp2 -f tee -map 0:v -map 0:a "\[onfail=ignore\]archive-20121107.mkv|\[f=mpegts\]udp://10.0.1.255:1234/" * Use `ffmpeg` to encode the input, and send the output to three different destinations. The `dump_extra` bitstream filter is used to add extradata information to all the output video keyframes packets, as requested by the MPEG-TS format. The select option is applied to out.aac in order to make it contain only audio packets. ffmpeg -i ... -map 0 -flags +global\_header -c:v libx264 -c:a aac -f tee "\[bsfs/v=dump\_extra=freq=keyframe\]out.ts|\[movflags=+faststart\]out.mp4|\[select=a\]out.aac" * As above, but select only stream `a:1` for the audio output. Note that a second level escaping must be performed, as ":" is a special character used to separate options. ffmpeg -i ... -map 0 -flags +global\_header -c:v libx264 -c:a aac -f tee "\[bsfs/v=dump\_extra=freq=keyframe\]out.ts|\[movflags=+faststart\]out.mp4|\[select=\\'a:1\\'\]out.aac" ### 21.72 webm\_chunk WebM Live Chunk Muxer. This muxer writes out WebM headers and chunks as separate files which can be consumed by clients that support WebM Live streams via DASH. #### 21.72.1 Options This muxer supports the following options: chunk\_start\_index Index of the first chunk (defaults to 0). header Filename of the header where the initialization data will be written. audio\_chunk\_duration Duration of each audio chunk in milliseconds (defaults to 5000). #### 21.72.2 Example ffmpeg -f v4l2 -i /dev/video0 \\ -f alsa -i hw:0 \\ -map 0:0 \\ -c:v libvpx-vp9 \\ -s 640x360 -keyint\_min 30 -g 30 \\ -f webm\_chunk \\ -header webm\_live\_video\_360.hdr \\ -chunk\_start\_index 1 \\ webm\_live\_video\_360\_%d.chk \\ -map 1:0 \\ -c:a libvorbis \\ -b:a 128k \\ -f webm\_chunk \\ -header webm\_live\_audio\_128.hdr \\ -chunk\_start\_index 1 \\ -audio\_chunk\_duration 1000 \\ webm\_live\_audio\_128\_%d.chk ### 21.73 webm\_dash\_manifest WebM DASH Manifest muxer. This muxer implements the WebM DASH Manifest specification to generate the DASH manifest XML. It also supports manifest generation for DASH live streams. For more information see: * WebM DASH Specification: https://sites.google.com/a/webmproject.org/wiki/adaptive-streaming/webm-dash-specification * ISO DASH Specification: http://standards.iso.org/ittf/PubliclyAvailableStandards/c065274\_ISO\_IEC\_23009-1\_2014.zip #### 21.73.1 Options This muxer supports the following options: adaptation\_sets This option has the following syntax: "id=x,streams=a,b,c id=y,streams=d,e" where x and y are the unique identifiers of the adaptation sets and a,b,c,d and e are the indices of the corresponding audio and video streams. Any number of adaptation sets can be added using this option. live Set this to 1 to create a live stream DASH Manifest. Default: 0. chunk\_start\_index Start index of the first chunk. This will go in the ‘startNumber’ attribute of the ‘SegmentTemplate’ element in the manifest. Default: 0. chunk\_duration\_ms Duration of each chunk in milliseconds. This will go in the ‘duration’ attribute of the ‘SegmentTemplate’ element in the manifest. Default: 1000. utc\_timing\_url URL of the page that will return the UTC timestamp in ISO format. This will go in the ‘value’ attribute of the ‘UTCTiming’ element in the manifest. Default: None. time\_shift\_buffer\_depth Smallest time (in seconds) shifting buffer for which any Representation is guaranteed to be available. This will go in the ‘timeShiftBufferDepth’ attribute of the ‘MPD’ element. Default: 60. minimum\_update\_period Minimum update period (in seconds) of the manifest. This will go in the ‘minimumUpdatePeriod’ attribute of the ‘MPD’ element. Default: 0. #### 21.73.2 Example ffmpeg -f webm\_dash\_manifest -i video1.webm \\ -f webm\_dash\_manifest -i video2.webm \\ -f webm\_dash\_manifest -i audio1.webm \\ -f webm\_dash\_manifest -i audio2.webm \\ -map 0 -map 1 -map 2 -map 3 \\ -c copy \\ -f webm\_dash\_manifest \\ -adaptation\_sets "id=0,streams=0,1 id=1,streams=2,3" \\ manifest.xml ## 22 Metadata FFmpeg is able to dump metadata from media files into a simple UTF-8-encoded INI-like text file and then load it back using the metadata muxer/demuxer. The file format is as follows: 1. A file consists of a header and a number of metadata tags divided into sections, each on its own line. 2. The header is a ‘;FFMETADATA’ string, followed by a version number (now 1). 3. Metadata tags are of the form ‘key=value’ 4. Immediately after header follows global metadata 5. After global metadata there may be sections with per-stream/per-chapter metadata. 6. A section starts with the section name in uppercase (i.e. STREAM or CHAPTER) in brackets (‘\[’, ‘\]’) and ends with next section or end of file. 7. At the beginning of a chapter section there may be an optional timebase to be used for start/end values. It must be in form ‘TIMEBASE=num/den’, where num and den are integers. If the timebase is missing then start/end times are assumed to be in nanoseconds. Next a chapter section must contain chapter start and end times in form ‘START=num’, ‘END=num’, where num is a positive integer. 8. Empty lines and lines starting with ‘;’ or ‘#’ are ignored. 9. Metadata keys or values containing special characters (‘\=’, ‘;’, ‘#’, ‘\\’ and a newline) must be escaped with a backslash ‘\\’. 10. Note that whitespace in metadata (e.g. ‘foo = bar’) is considered to be a part of the tag (in the example above key is ‘foo ’, value is ‘ bar’). A ffmetadata file might look like this: ;FFMETADATA1 title=bike\\\\shed ;this is a comment artist=FFmpeg troll team \[CHAPTER\] TIMEBASE=1/1000 START=0 #chapter ends at 0:01:00 END=60000 title=chapter \\#1 \[STREAM\] title=multi\\ line By using the ffmetadata muxer and demuxer it is possible to extract metadata from an input file to an ffmetadata file, and then transcode the file into an output file with the edited ffmetadata file. Extracting an ffmetadata file with ffmpeg goes as follows: ffmpeg -i INPUT -f ffmetadata FFMETADATAFILE Reinserting edited metadata information from the FFMETADATAFILE file can be done as: ffmpeg -i INPUT -i FFMETADATAFILE -map\_metadata 1 -codec copy OUTPUT ## 23 Protocol Options The libavformat library provides some generic global options, which can be set on all the protocols. In addition each protocol may support so-called private options, which are specific for that component. Options may be set by specifying -option value in the FFmpeg tools, or by setting the value explicitly in the `AVFormatContext` options or using the libavutil/opt.h API for programmatic use. The list of supported options follows: protocol\_whitelist list (_input_) Set a ","-separated list of allowed protocols. "ALL" matches all protocols. Protocols prefixed by "-" are disabled. All protocols are allowed by default but protocols used by an another protocol (nested protocols) are restricted to a per protocol subset. ## 24 Protocols Protocols are configured elements in FFmpeg that enable access to resources that require specific protocols. When you configure your FFmpeg build, all the supported protocols are enabled by default. You can list all available ones using the configure option "–list-protocols". You can disable all the protocols using the configure option "–disable-protocols", and selectively enable a protocol using the option "–enable-protocol=PROTOCOL", or you can disable a particular protocol using the option "–disable-protocol=PROTOCOL". The option "-protocols" of the ff\* tools will display the list of supported protocols. All protocols accept the following options: rw\_timeout Maximum time to wait for (network) read/write operations to complete, in microseconds. A description of the currently available protocols follows. ### 24.1 amqp Advanced Message Queueing Protocol (AMQP) version 0-9-1 is a broker based publish-subscribe communication protocol. FFmpeg must be compiled with –enable-librabbitmq to support AMQP. A separate AMQP broker must also be run. An example open-source AMQP broker is RabbitMQ. After starting the broker, an FFmpeg client may stream data to the broker using the command: ffmpeg -re -i input -f mpegts amqp://\[\[user\]:\[password\]@\]hostname\[:port\]\[/vhost\] Where hostname and port (default is 5672) is the address of the broker. The client may also set a user/password for authentication. The default for both fields is "guest". Name of virtual host on broker can be set with vhost. The default value is "/". Muliple subscribers may stream from the broker using the command: ffplay amqp://\[\[user\]:\[password\]@\]hostname\[:port\]\[/vhost\] In RabbitMQ all data published to the broker flows through a specific exchange, and each subscribing client has an assigned queue/buffer. When a packet arrives at an exchange, it may be copied to a client’s queue depending on the exchange and routing\_key fields. The following options are supported: exchange Sets the exchange to use on the broker. RabbitMQ has several predefined exchanges: "amq.direct" is the default exchange, where the publisher and subscriber must have a matching routing\_key; "amq.fanout" is the same as a broadcast operation (i.e. the data is forwarded to all queues on the fanout exchange independent of the routing\_key); and "amq.topic" is similar to "amq.direct", but allows for more complex pattern matching (refer to the RabbitMQ documentation). routing\_key Sets the routing key. The default value is "amqp". The routing key is used on the "amq.direct" and "amq.topic" exchanges to decide whether packets are written to the queue of a subscriber. pkt\_size Maximum size of each packet sent/received to the broker. Default is 131072. Minimum is 4096 and max is any large value (representable by an int). When receiving packets, this sets an internal buffer size in FFmpeg. It should be equal to or greater than the size of the published packets to the broker. Otherwise the received message may be truncated causing decoding errors. connection\_timeout The timeout in seconds during the initial connection to the broker. The default value is rw\_timeout, or 5 seconds if rw\_timeout is not set. delivery\_mode mode Sets the delivery mode of each message sent to broker. The following values are accepted: ‘persistent’ Delivery mode set to "persistent" (2). This is the default value. Messages may be written to the broker’s disk depending on its setup. ‘non-persistent’ Delivery mode set to "non-persistent" (1). Messages will stay in broker’s memory unless the broker is under memory pressure. ### 24.2 async Asynchronous data filling wrapper for input stream. Fill data in a background thread, to decouple I/O operation from demux thread. async:URL async:http://host/resource async:cache:http://host/resource ### 24.3 bluray Read BluRay playlist. The accepted options are: angle BluRay angle chapter Start chapter (1...N) playlist Playlist to read (BDMV/PLAYLIST/?????.mpls) Examples: Read longest playlist from BluRay mounted to /mnt/bluray: bluray:/mnt/bluray Read angle 2 of playlist 4 from BluRay mounted to /mnt/bluray, start from chapter 2: \-playlist 4 -angle 2 -chapter 2 bluray:/mnt/bluray ### 24.4 cache Caching wrapper for input stream. Cache the input stream to temporary file. It brings seeking capability to live streams. The accepted options are: read\_ahead\_limit Amount in bytes that may be read ahead when seeking isn’t supported. Range is -1 to INT\_MAX. -1 for unlimited. Default is 65536. URL Syntax is cache:URL ### 24.5 concat Physical concatenation protocol. Read and seek from many resources in sequence as if they were a unique resource. A URL accepted by this protocol has the syntax: concat:URL1|URL2|...|URLN where URL1, URL2, ..., URLN are the urls of the resource to be concatenated, each one possibly specifying a distinct protocol. For example to read a sequence of files split1.mpeg, split2.mpeg, split3.mpeg with `ffplay` use the command: ffplay concat:split1.mpeg\\|split2.mpeg\\|split3.mpeg Note that you may need to escape the character "|" which is special for many shells. ### 24.6 concatf Physical concatenation protocol using a line break delimited list of resources. Read and seek from many resources in sequence as if they were a unique resource. A URL accepted by this protocol has the syntax: concatf:URL where URL is the url containing a line break delimited list of resources to be concatenated, each one possibly specifying a distinct protocol. Special characters must be escaped with backslash or single quotes. See (ffmpeg-utils)the "Quoting and escaping" section in the ffmpeg-utils(1) manual. For example to read a sequence of files split1.mpeg, split2.mpeg, split3.mpeg listed in separate lines within a file split.txt with `ffplay` use the command: ffplay concatf:split.txt Where split.txt contains the lines: split1.mpeg split2.mpeg split3.mpeg ### 24.7 crypto AES-encrypted stream reading protocol. The accepted options are: key Set the AES decryption key binary block from given hexadecimal representation. iv Set the AES decryption initialization vector binary block from given hexadecimal representation. Accepted URL formats: crypto:URL crypto+URL ### 24.8 data Data in-line in the URI. See http://en.wikipedia.org/wiki/Data\_URI\_scheme. For example, to convert a GIF file given inline with `ffmpeg`: ffmpeg -i "data:image/gif;base64,R0lGODdhCAAIAMIEAAAAAAAA//8AAP//AP///////////////ywAAAAACAAIAAADF0gEDLojDgdGiJdJqUX02iB4E8Q9jUMkADs=" smiley.png ### 24.9 fd File descriptor access protocol. The accepted syntax is: fd: -fd file\_descriptor If fd is not specified, by default the stdout file descriptor will be used for writing, stdin for reading. Unlike the pipe protocol, fd protocol has seek support if it corresponding to a regular file. fd protocol doesn’t support pass file descriptor via URL for security. This protocol accepts the following options: blocksize Set I/O operation maximum block size, in bytes. Default value is `INT_MAX`, which results in not limiting the requested block size. Setting this value reasonably low improves user termination request reaction time, which is valuable if data transmission is slow. fd Set file descriptor. ### 24.10 file File access protocol. Read from or write to a file. A file URL can have the form: file:filename where filename is the path of the file to read. An URL that does not have a protocol prefix will be assumed to be a file URL. Depending on the build, an URL that looks like a Windows path with the drive letter at the beginning will also be assumed to be a file URL (usually not the case in builds for unix-like systems). For example to read from a file input.mpeg with `ffmpeg` use the command: ffmpeg -i file:input.mpeg output.mpeg This protocol accepts the following options: truncate Truncate existing files on write, if set to 1. A value of 0 prevents truncating. Default value is 1. blocksize Set I/O operation maximum block size, in bytes. Default value is `INT_MAX`, which results in not limiting the requested block size. Setting this value reasonably low improves user termination request reaction time, which is valuable for files on slow medium. follow If set to 1, the protocol will retry reading at the end of the file, allowing reading files that still are being written. In order for this to terminate, you either need to use the rw\_timeout option, or use the interrupt callback (for API users). seekable Controls if seekability is advertised on the file. 0 means non-seekable, -1 means auto (seekable for normal files, non-seekable for named pipes). Many demuxers handle seekable and non-seekable resources differently, overriding this might speed up opening certain files at the cost of losing some features (e.g. accurate seeking). ### 24.11 ftp FTP (File Transfer Protocol). Read from or write to remote resources using FTP protocol. Following syntax is required. ftp://\[user\[:password\]@\]server\[:port\]/path/to/remote/resource.mpeg This protocol accepts the following options. timeout Set timeout in microseconds of socket I/O operations used by the underlying low level operation. By default it is set to -1, which means that the timeout is not specified. ftp-user Set a user to be used for authenticating to the FTP server. This is overridden by the user in the FTP URL. ftp-password Set a password to be used for authenticating to the FTP server. This is overridden by the password in the FTP URL, or by ftp-anonymous-password if no user is set. ftp-anonymous-password Password used when login as anonymous user. Typically an e-mail address should be used. ftp-write-seekable Control seekability of connection during encoding. If set to 1 the resource is supposed to be seekable, if set to 0 it is assumed not to be seekable. Default value is 0. NOTE: Protocol can be used as output, but it is recommended to not do it, unless special care is taken (tests, customized server configuration etc.). Different FTP servers behave in different way during seek operation. ff\* tools may produce incomplete content due to server limitations. ### 24.12 gopher Gopher protocol. ### 24.13 gophers Gophers protocol. The Gopher protocol with TLS encapsulation. ### 24.14 hls Read Apple HTTP Live Streaming compliant segmented stream as a uniform one. The M3U8 playlists describing the segments can be remote HTTP resources or local files, accessed using the standard file protocol. The nested protocol is declared by specifying "+proto" after the hls URI scheme name, where proto is either "file" or "http". hls+http://host/path/to/remote/resource.m3u8 hls+file://path/to/local/resource.m3u8 Using this protocol is discouraged - the hls demuxer should work just as well (if not, please report the issues) and is more complete. To use the hls demuxer instead, simply use the direct URLs to the m3u8 files. ### 24.15 http HTTP (Hyper Text Transfer Protocol). This protocol accepts the following options: seekable Control seekability of connection. If set to 1 the resource is supposed to be seekable, if set to 0 it is assumed not to be seekable, if set to -1 it will try to autodetect if it is seekable. Default value is -1. chunked\_post If set to 1 use chunked Transfer-Encoding for posts, default is 1. http\_proxy set HTTP proxy to tunnel through e.g. http://example.com:1234 headers Set custom HTTP headers, can override built in default headers. The value must be a string encoding the headers. content\_type Set a specific content type for the POST messages or for listen mode. user\_agent Override the User-Agent header. If not specified the protocol will use a string describing the libavformat build. ("Lavf/<version>") referer Set the Referer header. Include ’Referer: URL’ header in HTTP request. multiple\_requests Use persistent connections if set to 1, default is 0. post\_data Set custom HTTP post data. mime\_type Export the MIME type. http\_version Exports the HTTP response version number. Usually "1.0" or "1.1". cookies Set the cookies to be sent in future requests. The format of each cookie is the same as the value of a Set-Cookie HTTP response field. Multiple cookies can be delimited by a newline character. icy If set to 1 request ICY (SHOUTcast) metadata from the server. If the server supports this, the metadata has to be retrieved by the application by reading the icy\_metadata\_headers and icy\_metadata\_packet options. The default is 1. icy\_metadata\_headers If the server supports ICY metadata, this contains the ICY-specific HTTP reply headers, separated by newline characters. icy\_metadata\_packet If the server supports ICY metadata, and icy was set to 1, this contains the last non-empty metadata packet sent by the server. It should be polled in regular intervals by applications interested in mid-stream metadata updates. metadata Set an exported dictionary containing Icecast metadata from the bitstream, if present. Only useful with the C API. auth\_type Set HTTP authentication type. No option for Digest, since this method requires getting nonce parameters from the server first and can’t be used straight away like Basic. none Choose the HTTP authentication type automatically. This is the default. basic Choose the HTTP basic authentication. Basic authentication sends a Base64-encoded string that contains a user name and password for the client. Base64 is not a form of encryption and should be considered the same as sending the user name and password in clear text (Base64 is a reversible encoding). If a resource needs to be protected, strongly consider using an authentication scheme other than basic authentication. HTTPS/TLS should be used with basic authentication. Without these additional security enhancements, basic authentication should not be used to protect sensitive or valuable information. send\_expect\_100 Send an Expect: 100-continue header for POST. If set to 1 it will send, if set to 0 it won’t, if set to -1 it will try to send if it is applicable. Default value is -1. location An exported dictionary containing the content location. Only useful with the C API. offset Set initial byte offset. end\_offset Try to limit the request to bytes preceding this offset. method When used as a client option it sets the HTTP method for the request. When used as a server option it sets the HTTP method that is going to be expected from the client(s). If the expected and the received HTTP method do not match the client will be given a Bad Request response. When unset the HTTP method is not checked for now. This will be replaced by autodetection in the future. reconnect Reconnect automatically when disconnected before EOF is hit. reconnect\_at\_eof If set then eof is treated like an error and causes reconnection, this is useful for live / endless streams. reconnect\_on\_network\_error Reconnect automatically in case of TCP/TLS errors during connect. reconnect\_on\_http\_error A comma separated list of HTTP status codes to reconnect on. The list can include specific status codes (e.g. ’503’) or the strings ’4xx’ / ’5xx’. reconnect\_streamed If set then even streamed/non seekable streams will be reconnected on errors. reconnect\_delay\_max Set the maximum delay in seconds after which to give up reconnecting. reconnect\_max\_retries Set the maximum number of times to retry a connection. Default unset. reconnect\_delay\_total\_max Set the maximum total delay in seconds after which to give up reconnecting. respect\_retry\_after If enabled, and a Retry-After header is encountered, its requested reconnection delay will be honored, rather than using exponential backoff. Useful for 429 and 503 errors. Default enabled. listen If set to 1 enables experimental HTTP server. This can be used to send data when used as an output option, or read data from a client with HTTP POST when used as an input option. If set to 2 enables experimental multi-client HTTP server. This is not yet implemented in ffmpeg.c and thus must not be used as a command line option. \# Server side (sending): ffmpeg -i somefile.ogg -c copy -listen 1 -f ogg http://server:port # Client side (receiving): ffmpeg -i http://server:port -c copy somefile.ogg # Client can also be done with wget: wget http://server:port -O somefile.ogg # Server side (receiving): ffmpeg -listen 1 -i http://server:port -c copy somefile.ogg # Client side (sending): ffmpeg -i somefile.ogg -chunked\_post 0 -c copy -f ogg http://server:port # Client can also be done with wget: wget --post-file=somefile.ogg http://server:port resource The resource requested by a client, when the experimental HTTP server is in use. reply\_code The HTTP code returned to the client, when the experimental HTTP server is in use. short\_seek\_size Set the threshold, in bytes, for when a readahead should be prefered over a seek and new HTTP request. This is useful, for example, to make sure the same connection is used for reading large video packets with small audio packets in between. #### 24.15.1 HTTP Cookies Some HTTP requests will be denied unless cookie values are passed in with the request. The cookies option allows these cookies to be specified. At the very least, each cookie must specify a value along with a path and domain. HTTP requests that match both the domain and path will automatically include the cookie value in the HTTP Cookie header field. Multiple cookies can be delimited by a newline. The required syntax to play a stream specifying a cookie is: ffplay -cookies "nlqptid=nltid=tsn; path=/; domain=somedomain.com;" http://somedomain.com/somestream.m3u8 ### 24.16 Icecast Icecast protocol (stream to Icecast servers) This protocol accepts the following options: ice\_genre Set the stream genre. ice\_name Set the stream name. ice\_description Set the stream description. ice\_url Set the stream website URL. ice\_public Set if the stream should be public. The default is 0 (not public). user\_agent Override the User-Agent header. If not specified a string of the form "Lavf/<version>" will be used. password Set the Icecast mountpoint password. content\_type Set the stream content type. This must be set if it is different from audio/mpeg. legacy\_icecast This enables support for Icecast versions < 2.4.0, that do not support the HTTP PUT method but the SOURCE method. tls Establish a TLS (HTTPS) connection to Icecast. icecast://\[username\[:password\]@\]server:port/mountpoint ### 24.17 ipfs InterPlanetary File System (IPFS) protocol support. One can access files stored on the IPFS network through so-called gateways. These are http(s) endpoints. This protocol wraps the IPFS native protocols (ipfs:// and ipns://) to be sent to such a gateway. Users can (and should) host their own node which means this protocol will use one’s local gateway to access files on the IPFS network. This protocol accepts the following options: gateway Defines the gateway to use. When not set, the protocol will first try locating the local gateway by looking at `$IPFS_GATEWAY`, `$IPFS_PATH` and `$HOME/.ipfs/`, in that order. One can use this protocol in 2 ways. Using IPFS: ffplay ipfs://<hash> Or the IPNS protocol (IPNS is mutable IPFS): ffplay ipns://<hash> ### 24.18 mmst MMS (Microsoft Media Server) protocol over TCP. ### 24.19 mmsh MMS (Microsoft Media Server) protocol over HTTP. The required syntax is: mmsh://server\[:port\]\[/app\]\[/playpath\] ### 24.20 md5 MD5 output protocol. Computes the MD5 hash of the data to be written, and on close writes this to the designated output or stdout if none is specified. It can be used to test muxers without writing an actual file. Some examples follow. \# Write the MD5 hash of the encoded AVI file to the file output.avi.md5. ffmpeg -i input.flv -f avi -y md5:output.avi.md5 # Write the MD5 hash of the encoded AVI file to stdout. ffmpeg -i input.flv -f avi -y md5: Note that some formats (typically MOV) require the output protocol to be seekable, so they will fail with the MD5 output protocol. ### 24.21 pipe UNIX pipe access protocol. Read and write from UNIX pipes. The accepted syntax is: pipe:\[number\] If fd isn’t specified, number is the number corresponding to the file descriptor of the pipe (e.g. 0 for stdin, 1 for stdout, 2 for stderr). If number is not specified, by default the stdout file descriptor will be used for writing, stdin for reading. For example to read from stdin with `ffmpeg`: cat test.wav | ffmpeg -i pipe:0 # ...this is the same as... cat test.wav | ffmpeg -i pipe: For writing to stdout with `ffmpeg`: ffmpeg -i test.wav -f avi pipe:1 | cat > test.avi # ...this is the same as... ffmpeg -i test.wav -f avi pipe: | cat > test.avi This protocol accepts the following options: blocksize Set I/O operation maximum block size, in bytes. Default value is `INT_MAX`, which results in not limiting the requested block size. Setting this value reasonably low improves user termination request reaction time, which is valuable if data transmission is slow. fd Set file descriptor. Note that some formats (typically MOV), require the output protocol to be seekable, so they will fail with the pipe output protocol. ### 24.22 prompeg Pro-MPEG Code of Practice #3 Release 2 FEC protocol. The Pro-MPEG CoP#3 FEC is a 2D parity-check forward error correction mechanism for MPEG-2 Transport Streams sent over RTP. This protocol must be used in conjunction with the `rtp_mpegts` muxer and the `rtp` protocol. The required syntax is: \-f rtp\_mpegts -fec prompeg=option\=val... rtp://hostname:port The destination UDP ports are `port + 2` for the column FEC stream and `port + 4` for the row FEC stream. This protocol accepts the following options: l=n The number of columns (4-20, LxD <= 100) d=n The number of rows (4-20, LxD <= 100) Example usage: \-f rtp\_mpegts -fec prompeg=l=8:d=4 rtp://hostname:port ### 24.23 rist Reliable Internet Streaming Transport protocol The accepted options are: rist\_profile Supported values: ‘simple’ ‘main’ This one is default. ‘advanced’ buffer\_size Set internal RIST buffer size in milliseconds for retransmission of data. Default value is 0 which means the librist default (1 sec). Maximum value is 30 seconds. fifo\_size Size of the librist receiver output fifo in number of packets. This must be a power of 2. Defaults to 8192 (vs the librist default of 1024). overrun\_nonfatal=1|0 Survive in case of librist fifo buffer overrun. Default value is 0. pkt\_size Set maximum packet size for sending data. 1316 by default. log\_level Set loglevel for RIST logging messages. You only need to set this if you explicitly want to enable debug level messages or packet loss simulation, otherwise the regular loglevel is respected. secret Set override of encryption secret, by default is unset. encryption Set encryption type, by default is disabled. Acceptable values are 128 and 256. ### 24.24 rtmp Real-Time Messaging Protocol. The Real-Time Messaging Protocol (RTMP) is used for streaming multimedia content across a TCP/IP network. The required syntax is: rtmp://\[username:password@\]server\[:port\]\[/app\]\[/instance\]\[/playpath\] The accepted parameters are: username An optional username (mostly for publishing). password An optional password (mostly for publishing). server The address of the RTMP server. port The number of the TCP port to use (by default is 1935). app It is the name of the application to access. It usually corresponds to the path where the application is installed on the RTMP server (e.g. /ondemand/, /flash/live/, etc.). You can override the value parsed from the URI through the `rtmp_app` option, too. playpath It is the path or name of the resource to play with reference to the application specified in app, may be prefixed by "mp4:". You can override the value parsed from the URI through the `rtmp_playpath` option, too. listen Act as a server, listening for an incoming connection. timeout Maximum time to wait for the incoming connection. Implies listen. Additionally, the following parameters can be set via command line options (or in code via `AVOption`s): rtmp\_app Name of application to connect on the RTMP server. This option overrides the parameter specified in the URI. rtmp\_buffer Set the client buffer time in milliseconds. The default is 3000. rtmp\_conn Extra arbitrary AMF connection parameters, parsed from a string, e.g. like `B:1 S:authMe O:1 NN:code:1.23 NS:flag:ok O:0`. Each value is prefixed by a single character denoting the type, B for Boolean, N for number, S for string, O for object, or Z for null, followed by a colon. For Booleans the data must be either 0 or 1 for FALSE or TRUE, respectively. Likewise for Objects the data must be 0 or 1 to end or begin an object, respectively. Data items in subobjects may be named, by prefixing the type with ’N’ and specifying the name before the value (i.e. `NB:myFlag:1`). This option may be used multiple times to construct arbitrary AMF sequences. rtmp\_enhanced\_codecs Specify the list of codecs the client advertises to support in an enhanced RTMP stream. This option should be set to a comma separated list of fourcc values, like `hvc1,av01,vp09` for multiple codecs or `hvc1` for only one codec. The specified list will be presented in the "fourCcLive" property of the Connect Command Message. rtmp\_flashver Version of the Flash plugin used to run the SWF player. The default is LNX 9,0,124,2. (When publishing, the default is FMLE/3.0 (compatible; <libavformat version>).) rtmp\_flush\_interval Number of packets flushed in the same request (RTMPT only). The default is 10. rtmp\_live Specify that the media is a live stream. No resuming or seeking in live streams is possible. The default value is `any`, which means the subscriber first tries to play the live stream specified in the playpath. If a live stream of that name is not found, it plays the recorded stream. The other possible values are `live` and `recorded`. rtmp\_pageurl URL of the web page in which the media was embedded. By default no value will be sent. rtmp\_playpath Stream identifier to play or to publish. This option overrides the parameter specified in the URI. rtmp\_subscribe Name of live stream to subscribe to. By default no value will be sent. It is only sent if the option is specified or if rtmp\_live is set to live. rtmp\_swfhash SHA256 hash of the decompressed SWF file (32 bytes). rtmp\_swfsize Size of the decompressed SWF file, required for SWFVerification. rtmp\_swfurl URL of the SWF player for the media. By default no value will be sent. rtmp\_swfverify URL to player swf file, compute hash/size automatically. rtmp\_tcurl URL of the target stream. Defaults to proto://host\[:port\]/app. tcp\_nodelay=1|0 Set TCP\_NODELAY to disable Nagle’s algorithm. Default value is 0. _Remark: Writing to the socket is currently not optimized to minimize system calls and reduces the efficiency / effect of TCP\_NODELAY._ For example to read with `ffplay` a multimedia resource named "sample" from the application "vod" from an RTMP server "myserver": ffplay rtmp://myserver/vod/sample To publish to a password protected server, passing the playpath and app names separately: ffmpeg -re -i <input> -f flv -rtmp\_playpath some/long/path -rtmp\_app long/app/name rtmp://username:password@myserver/ ### 24.25 rtmpe Encrypted Real-Time Messaging Protocol. The Encrypted Real-Time Messaging Protocol (RTMPE) is used for streaming multimedia content within standard cryptographic primitives, consisting of Diffie-Hellman key exchange and HMACSHA256, generating a pair of RC4 keys. ### 24.26 rtmps Real-Time Messaging Protocol over a secure SSL connection. The Real-Time Messaging Protocol (RTMPS) is used for streaming multimedia content across an encrypted connection. ### 24.27 rtmpt Real-Time Messaging Protocol tunneled through HTTP. The Real-Time Messaging Protocol tunneled through HTTP (RTMPT) is used for streaming multimedia content within HTTP requests to traverse firewalls. ### 24.28 rtmpte Encrypted Real-Time Messaging Protocol tunneled through HTTP. The Encrypted Real-Time Messaging Protocol tunneled through HTTP (RTMPTE) is used for streaming multimedia content within HTTP requests to traverse firewalls. ### 24.29 rtmpts Real-Time Messaging Protocol tunneled through HTTPS. The Real-Time Messaging Protocol tunneled through HTTPS (RTMPTS) is used for streaming multimedia content within HTTPS requests to traverse firewalls. ### 24.30 libsmbclient libsmbclient permits one to manipulate CIFS/SMB network resources. Following syntax is required. smb://\[\[domain:\]user\[:password@\]\]server\[/share\[/path\[/file\]\]\] This protocol accepts the following options. timeout Set timeout in milliseconds of socket I/O operations used by the underlying low level operation. By default it is set to -1, which means that the timeout is not specified. truncate Truncate existing files on write, if set to 1. A value of 0 prevents truncating. Default value is 1. workgroup Set the workgroup used for making connections. By default workgroup is not specified. For more information see: http://www.samba.org/. ### 24.31 libssh Secure File Transfer Protocol via libssh Read from or write to remote resources using SFTP protocol. Following syntax is required. sftp://\[user\[:password\]@\]server\[:port\]/path/to/remote/resource.mpeg This protocol accepts the following options. timeout Set timeout of socket I/O operations used by the underlying low level operation. By default it is set to -1, which means that the timeout is not specified. truncate Truncate existing files on write, if set to 1. A value of 0 prevents truncating. Default value is 1. private\_key Specify the path of the file containing private key to use during authorization. By default libssh searches for keys in the ~/.ssh/ directory. Example: Play a file stored on remote server. ffplay sftp://user:password@server\_address:22/home/user/resource.mpeg ### 24.32 librtmp rtmp, rtmpe, rtmps, rtmpt, rtmpte Real-Time Messaging Protocol and its variants supported through librtmp. Requires the presence of the librtmp headers and library during configuration. You need to explicitly configure the build with "–enable-librtmp". If enabled this will replace the native RTMP protocol. This protocol provides most client functions and a few server functions needed to support RTMP, RTMP tunneled in HTTP (RTMPT), encrypted RTMP (RTMPE), RTMP over SSL/TLS (RTMPS) and tunneled variants of these encrypted types (RTMPTE, RTMPTS). The required syntax is: rtmp\_proto://server\[:port\]\[/app\]\[/playpath\] options where rtmp\_proto is one of the strings "rtmp", "rtmpt", "rtmpe", "rtmps", "rtmpte", "rtmpts" corresponding to each RTMP variant, and server, port, app and playpath have the same meaning as specified for the RTMP native protocol. options contains a list of space-separated options of the form key\=val. See the librtmp manual page (man 3 librtmp) for more information. For example, to stream a file in real-time to an RTMP server using `ffmpeg`: ffmpeg -re -i myfile -f flv rtmp://myserver/live/mystream To play the same stream using `ffplay`: ffplay "rtmp://myserver/live/mystream live=1" ### 24.33 rtp Real-time Transport Protocol. The required syntax for an RTP URL is: rtp://hostname\[:port\]\[?options\] port specifies the RTP port to use. options contains a list of &-separated options of the form key\=val. The following URL options are supported: ttl=n Set the TTL (Time-To-Live) value (for multicast only). rtcpport=n Set the remote RTCP port to n. localrtpport=n Set the local RTP port to n. localrtcpport=n' Set the local RTCP port to n. pkt\_size=n Set max packet size (in bytes) to n. buffer\_size=size Set the maximum UDP socket buffer size in bytes. connect=0|1 Do a `connect()` on the UDP socket (if set to 1) or not (if set to 0). sources=ip\[,ip\] List allowed source IP addresses. block=ip\[,ip\] List disallowed (blocked) source IP addresses. write\_to\_source=0|1 Send packets to the source address of the latest received packet (if set to 1) or to a default remote address (if set to 0). localport=n Set the local RTP port to n. This is a deprecated option. Instead, localrtpport should be used. localaddr=addr Local IP address of a network interface used for sending packets or joining multicast groups. timeout=n Set timeout (in microseconds) of socket I/O operations to n. Important notes: 1. If rtcpport is not set the RTCP port will be set to the RTP port value plus 1. 2. If localrtpport (the local RTP port) is not set any available port will be used for the local RTP and RTCP ports. 3. If localrtcpport (the local RTCP port) is not set it will be set to the local RTP port value plus 1. ### 24.34 rtsp Real-Time Streaming Protocol. RTSP is not technically a protocol handler in libavformat, it is a demuxer and muxer. The demuxer supports both normal RTSP (with data transferred over RTP; this is used by e.g. Apple and Microsoft) and Real-RTSP (with data transferred over RDT). The muxer can be used to send a stream using RTSP ANNOUNCE to a server supporting it (currently Darwin Streaming Server and Mischa Spiegelmock’s RTSP server). The required syntax for a RTSP url is: rtsp://hostname\[:port\]/path Options can be set on the `ffmpeg`/`ffplay` command line, or set in code via `AVOption`s or in `avformat_open_input`. #### 24.34.1 Muxer The following options are supported. rtsp\_transport Set RTSP transport protocols. It accepts the following values: ‘udp’ Use UDP as lower transport protocol. ‘tcp’ Use TCP (interleaving within the RTSP control channel) as lower transport protocol. Default value is ‘0’. rtsp\_flags Set RTSP flags. The following values are accepted: ‘latm’ Use MP4A-LATM packetization instead of MPEG4-GENERIC for AAC. ‘rfc2190’ Use RFC 2190 packetization instead of RFC 4629 for H.263. ‘skip\_rtcp’ Don’t send RTCP sender reports. ‘h264\_mode0’ Use mode 0 for H.264 in RTP. ‘send\_bye’ Send RTCP BYE packets when finishing. Default value is ‘0’. min\_port Set minimum local UDP port. Default value is 5000. max\_port Set maximum local UDP port. Default value is 65000. buffer\_size Set the maximum socket buffer size in bytes. pkt\_size Set max send packet size (in bytes). Default value is 1472. #### 24.34.2 Demuxer The following options are supported. initial\_pause Do not start playing the stream immediately if set to 1. Default value is 0. rtsp\_transport Set RTSP transport protocols. It accepts the following values: ‘udp’ Use UDP as lower transport protocol. ‘tcp’ Use TCP (interleaving within the RTSP control channel) as lower transport protocol. ‘udp\_multicast’ Use UDP multicast as lower transport protocol. ‘http’ Use HTTP tunneling as lower transport protocol, which is useful for passing proxies. ‘https’ Use HTTPs tunneling as lower transport protocol, which is useful for passing proxies and widely used for security consideration. Multiple lower transport protocols may be specified, in that case they are tried one at a time (if the setup of one fails, the next one is tried). For the muxer, only the ‘tcp’ and ‘udp’ options are supported. rtsp\_flags Set RTSP flags. The following values are accepted: ‘filter\_src’ Accept packets only from negotiated peer address and port. ‘listen’ Act as a server, listening for an incoming connection. ‘prefer\_tcp’ Try TCP for RTP transport first, if TCP is available as RTSP RTP transport. ‘satip\_raw’ Export raw MPEG-TS stream instead of demuxing. The flag will simply write out the raw stream, with the original PAT/PMT/PIDs intact. Default value is ‘none’. allowed\_media\_types Set media types to accept from the server. The following flags are accepted: ‘video’ ‘audio’ ‘data’ ‘subtitle’ By default it accepts all media types. min\_port Set minimum local UDP port. Default value is 5000. max\_port Set maximum local UDP port. Default value is 65000. listen\_timeout Set maximum timeout (in seconds) to establish an initial connection. Setting listen\_timeout > 0 sets rtsp\_flags to ‘listen’. Default is -1 which means an infinite timeout when ‘listen’ mode is set. reorder\_queue\_size Set number of packets to buffer for handling of reordered packets. timeout Set socket TCP I/O timeout in microseconds. user\_agent Override User-Agent header. If not specified, it defaults to the libavformat identifier string. buffer\_size Set the maximum socket buffer size in bytes. When receiving data over UDP, the demuxer tries to reorder received packets (since they may arrive out of order, or packets may get lost totally). This can be disabled by setting the maximum demuxing delay to zero (via the `max_delay` field of AVFormatContext). When watching multi-bitrate Real-RTSP streams with `ffplay`, the streams to display can be chosen with `-vst` n and `-ast` n for video and audio respectively, and can be switched on the fly by pressing `v` and `a`. #### 24.34.3 Examples The following examples all make use of the `ffplay` and `ffmpeg` tools. * Watch a stream over UDP, with a max reordering delay of 0.5 seconds: ffplay -max\_delay 500000 -rtsp\_transport udp rtsp://server/video.mp4 * Watch a stream tunneled over HTTP: ffplay -rtsp\_transport http rtsp://server/video.mp4 * Send a stream in realtime to a RTSP server, for others to watch: ffmpeg -re -i input -f rtsp -muxdelay 0.1 rtsp://server/live.sdp * Receive a stream in realtime: ffmpeg -rtsp\_flags listen -i rtsp://ownaddress/live.sdp output ### 24.35 sap Session Announcement Protocol (RFC 2974). This is not technically a protocol handler in libavformat, it is a muxer and demuxer. It is used for signalling of RTP streams, by announcing the SDP for the streams regularly on a separate port. #### 24.35.1 Muxer The syntax for a SAP url given to the muxer is: sap://destination\[:port\]\[?options\] The RTP packets are sent to destination on port port, or to port 5004 if no port is specified. options is a `&`\-separated list. The following options are supported: announce\_addr=address Specify the destination IP address for sending the announcements to. If omitted, the announcements are sent to the commonly used SAP announcement multicast address 224.2.127.254 (sap.mcast.net), or ff0e::2:7ffe if destination is an IPv6 address. announce\_port=port Specify the port to send the announcements on, defaults to 9875 if not specified. ttl=ttl Specify the time to live value for the announcements and RTP packets, defaults to 255. same\_port=0|1 If set to 1, send all RTP streams on the same port pair. If zero (the default), all streams are sent on unique ports, with each stream on a port 2 numbers higher than the previous. VLC/Live555 requires this to be set to 1, to be able to receive the stream. The RTP stack in libavformat for receiving requires all streams to be sent on unique ports. Example command lines follow. To broadcast a stream on the local subnet, for watching in VLC: ffmpeg -re -i input -f sap sap://224.0.0.255?same\_port=1 Similarly, for watching in `ffplay`: ffmpeg -re -i input -f sap sap://224.0.0.255 And for watching in `ffplay`, over IPv6: ffmpeg -re -i input -f sap sap://\[ff0e::1:2:3:4\] #### 24.35.2 Demuxer The syntax for a SAP url given to the demuxer is: sap://\[address\]\[:port\] address is the multicast address to listen for announcements on, if omitted, the default 224.2.127.254 (sap.mcast.net) is used. port is the port that is listened on, 9875 if omitted. The demuxers listens for announcements on the given address and port. Once an announcement is received, it tries to receive that particular stream. Example command lines follow. To play back the first stream announced on the normal SAP multicast address: ffplay sap:// To play back the first stream announced on one the default IPv6 SAP multicast address: ffplay sap://\[ff0e::2:7ffe\] ### 24.36 sctp Stream Control Transmission Protocol. The accepted URL syntax is: sctp://host:port\[?options\] The protocol accepts the following options: listen If set to any value, listen for an incoming connection. Outgoing connection is done by default. max\_streams Set the maximum number of streams. By default no limit is set. ### 24.37 srt Haivision Secure Reliable Transport Protocol via libsrt. The supported syntax for a SRT URL is: srt://hostname:port\[?options\] options contains a list of &-separated options of the form key\=val. or options srt://hostname:port options contains a list of ’-key val’ options. This protocol accepts the following options. connect\_timeout=milliseconds Connection timeout; SRT cannot connect for RTT > 1500 msec (2 handshake exchanges) with the default connect timeout of 3 seconds. This option applies to the caller and rendezvous connection modes. The connect timeout is 10 times the value set for the rendezvous mode (which can be used as a workaround for this connection problem with earlier versions). ffs=bytes Flight Flag Size (Window Size), in bytes. FFS is actually an internal parameter and you should set it to not less than recv\_buffer\_size and mss. The default value is relatively large, therefore unless you set a very large receiver buffer, you do not need to change this option. Default value is 25600. inputbw=bytes/seconds Sender nominal input rate, in bytes per seconds. Used along with oheadbw, when maxbw is set to relative (0), to calculate maximum sending rate when recovery packets are sent along with the main media stream: inputbw \* (100 + oheadbw) / 100 if inputbw is not set while maxbw is set to relative (0), the actual input rate is evaluated inside the library. Default value is 0. iptos=tos IP Type of Service. Applies to sender only. Default value is 0xB8. ipttl=ttl IP Time To Live. Applies to sender only. Default value is 64. latency=microseconds Timestamp-based Packet Delivery Delay. Used to absorb bursts of missed packet retransmissions. This flag sets both rcvlatency and peerlatency to the same value. Note that prior to version 1.3.0 this is the only flag to set the latency, however this is effectively equivalent to setting peerlatency, when side is sender and rcvlatency when side is receiver, and the bidirectional stream sending is not supported. listen\_timeout=microseconds Set socket listen timeout. maxbw=bytes/seconds Maximum sending bandwidth, in bytes per seconds. -1 infinite (CSRTCC limit is 30mbps) 0 relative to input rate (see inputbw) >0 absolute limit value Default value is 0 (relative) mode=caller|listener|rendezvous Connection mode. caller opens client connection. listener starts server to listen for incoming connections. rendezvous use Rendez-Vous connection mode. Default value is caller. mss=bytes Maximum Segment Size, in bytes. Used for buffer allocation and rate calculation using a packet counter assuming fully filled packets. The smallest MSS between the peers is used. This is 1500 by default in the overall internet. This is the maximum size of the UDP packet and can be only decreased, unless you have some unusual dedicated network settings. Default value is 1500. nakreport=1|0 If set to 1, Receiver will send ‘UMSG\_LOSSREPORT‘ messages periodically until a lost packet is retransmitted or intentionally dropped. Default value is 1. oheadbw=percents Recovery bandwidth overhead above input rate, in percents. See inputbw. Default value is 25%. passphrase=string HaiCrypt Encryption/Decryption Passphrase string, length from 10 to 79 characters. The passphrase is the shared secret between the sender and the receiver. It is used to generate the Key Encrypting Key using PBKDF2 (Password-Based Key Derivation Function). It is used only if pbkeylen is non-zero. It is used on the receiver only if the received data is encrypted. The configured passphrase cannot be recovered (write-only). enforced\_encryption=1|0 If true, both connection parties must have the same password set (including empty, that is, with no encryption). If the password doesn’t match or only one side is unencrypted, the connection is rejected. Default is true. kmrefreshrate=packets The number of packets to be transmitted after which the encryption key is switched to a new key. Default is -1. -1 means auto (0x1000000 in srt library). The range for this option is integers in the 0 - `INT_MAX`. kmpreannounce=packets The interval between when a new encryption key is sent and when switchover occurs. This value also applies to the subsequent interval between when switchover occurs and when the old encryption key is decommissioned. Default is -1. -1 means auto (0x1000 in srt library). The range for this option is integers in the 0 - `INT_MAX`. snddropdelay=microseconds The sender’s extra delay before dropping packets. This delay is added to the default drop delay time interval value. Special value -1: Do not drop packets on the sender at all. payload\_size=bytes Sets the maximum declared size of a packet transferred during the single call to the sending function in Live mode. Use 0 if this value isn’t used (which is default in file mode). Default is -1 (automatic), which typically means MPEG-TS; if you are going to use SRT to send any different kind of payload, such as, for example, wrapping a live stream in very small frames, then you can use a bigger maximum frame size, though not greater than 1456 bytes. pkt\_size=bytes Alias for ‘payload\_size’. peerlatency=microseconds The latency value (as described in rcvlatency) that is set by the sender side as a minimum value for the receiver. pbkeylen=bytes Sender encryption key length, in bytes. Only can be set to 0, 16, 24 and 32. Enable sender encryption if not 0. Not required on receiver (set to 0), key size obtained from sender in HaiCrypt handshake. Default value is 0. rcvlatency=microseconds The time that should elapse since the moment when the packet was sent and the moment when it’s delivered to the receiver application in the receiving function. This time should be a buffer time large enough to cover the time spent for sending, unexpectedly extended RTT time, and the time needed to retransmit the lost UDP packet. The effective latency value will be the maximum of this options’ value and the value of peerlatency set by the peer side. Before version 1.3.0 this option is only available as latency. recv\_buffer\_size=bytes Set UDP receive buffer size, expressed in bytes. send\_buffer\_size=bytes Set UDP send buffer size, expressed in bytes. timeout=microseconds Set raise error timeouts for read, write and connect operations. Note that the SRT library has internal timeouts which can be controlled separately, the value set here is only a cap on those. tlpktdrop=1|0 Too-late Packet Drop. When enabled on receiver, it skips missing packets that have not been delivered in time and delivers the following packets to the application when their time-to-play has come. It also sends a fake ACK to the sender. When enabled on sender and enabled on the receiving peer, the sender drops the older packets that have no chance of being delivered in time. It was automatically enabled in the sender if the receiver supports it. sndbuf=bytes Set send buffer size, expressed in bytes. rcvbuf=bytes Set receive buffer size, expressed in bytes. Receive buffer must not be greater than ffs. lossmaxttl=packets The value up to which the Reorder Tolerance may grow. When Reorder Tolerance is > 0, then packet loss report is delayed until that number of packets come in. Reorder Tolerance increases every time a "belated" packet has come, but it wasn’t due to retransmission (that is, when UDP packets tend to come out of order), with the difference between the latest sequence and this packet’s sequence, and not more than the value of this option. By default it’s 0, which means that this mechanism is turned off, and the loss report is always sent immediately upon experiencing a "gap" in sequences. minversion The minimum SRT version that is required from the peer. A connection to a peer that does not satisfy the minimum version requirement will be rejected. The version format in hex is 0xXXYYZZ for x.y.z in human readable form. streamid=string A string limited to 512 characters that can be set on the socket prior to connecting. This stream ID will be able to be retrieved by the listener side from the socket that is returned from srt\_accept and was connected by a socket with that set stream ID. SRT does not enforce any special interpretation of the contents of this string. This option doesn’t make sense in Rendezvous connection; the result might be that simply one side will override the value from the other side and it’s the matter of luck which one would win srt\_streamid=string Alias for ‘streamid’ to avoid conflict with ffmpeg command line option. smoother=live|file The type of Smoother used for the transmission for that socket, which is responsible for the transmission and congestion control. The Smoother type must be exactly the same on both connecting parties, otherwise the connection is rejected. messageapi=1|0 When set, this socket uses the Message API, otherwise it uses Buffer API. Note that in live mode (see transtype) there’s only message API available. In File mode you can chose to use one of two modes: Stream API (default, when this option is false). In this mode you may send as many data as you wish with one sending instruction, or even use dedicated functions that read directly from a file. The internal facility will take care of any speed and congestion control. When receiving, you can also receive as many data as desired, the data not extracted will be waiting for the next call. There is no boundary between data portions in the Stream mode. Message API. In this mode your single sending instruction passes exactly one piece of data that has boundaries (a message). Contrary to Live mode, this message may span across multiple UDP packets and the only size limitation is that it shall fit as a whole in the sending buffer. The receiver shall use as large buffer as necessary to receive the message, otherwise the message will not be given up. When the message is not complete (not all packets received or there was a packet loss) it will not be given up. transtype=live|file Sets the transmission type for the socket, in particular, setting this option sets multiple other parameters to their default values as required for a particular transmission type. live: Set options as for live transmission. In this mode, you should send by one sending instruction only so many data that fit in one UDP packet, and limited to the value defined first in payload\_size (1316 is default in this mode). There is no speed control in this mode, only the bandwidth control, if configured, in order to not exceed the bandwidth with the overhead transmission (retransmitted and control packets). file: Set options as for non-live transmission. See messageapi for further explanations linger=seconds The number of seconds that the socket waits for unsent data when closing. Default is -1. -1 means auto (off with 0 seconds in live mode, on with 180 seconds in file mode). The range for this option is integers in the 0 - `INT_MAX`. tsbpd=1|0 When true, use Timestamp-based Packet Delivery mode. The default behavior depends on the transmission type: enabled in live mode, disabled in file mode. For more information see: https://github.com/Haivision/srt. ### 24.38 srtp Secure Real-time Transport Protocol. The accepted options are: srtp\_in\_suite srtp\_out\_suite Select input and output encoding suites. Supported values: ‘AES\_CM\_128\_HMAC\_SHA1\_80’ ‘SRTP\_AES128\_CM\_HMAC\_SHA1\_80’ ‘AES\_CM\_128\_HMAC\_SHA1\_32’ ‘SRTP\_AES128\_CM\_HMAC\_SHA1\_32’ srtp\_in\_params srtp\_out\_params Set input and output encoding parameters, which are expressed by a base64-encoded representation of a binary block. The first 16 bytes of this binary block are used as master key, the following 14 bytes are used as master salt. ### 24.39 subfile Virtually extract a segment of a file or another stream. The underlying stream must be seekable. Accepted options: start Start offset of the extracted segment, in bytes. end End offset of the extracted segment, in bytes. If set to 0, extract till end of file. Examples: Extract a chapter from a DVD VOB file (start and end sectors obtained externally and multiplied by 2048): subfile,,start,153391104,end,268142592,,:/media/dvd/VIDEO\_TS/VTS\_08\_1.VOB Play an AVI file directly from a TAR archive: subfile,,start,183241728,end,366490624,,:archive.tar Play a MPEG-TS file from start offset till end: subfile,,start,32815239,end,0,,:video.ts ### 24.40 tee Writes the output to multiple protocols. The individual outputs are separated by | tee:file://path/to/local/this.avi|file://path/to/local/that.avi ### 24.41 tcp Transmission Control Protocol. The required syntax for a TCP url is: tcp://hostname:port\[?options\] options contains a list of &-separated options of the form key\=val. The list of supported options follows. listen=2|1|0 Listen for an incoming connection. 0 disables listen, 1 enables listen in single client mode, 2 enables listen in multi-client mode. Default value is 0. local\_addr=addr Local IP address of a network interface used for tcp socket connect. local\_port=port Local port used for tcp socket connect. timeout=microseconds Set raise error timeout, expressed in microseconds. This option is only relevant in read mode: if no data arrived in more than this time interval, raise error. listen\_timeout=milliseconds Set listen timeout, expressed in milliseconds. recv\_buffer\_size=bytes Set receive buffer size, expressed bytes. send\_buffer\_size=bytes Set send buffer size, expressed bytes. tcp\_nodelay=1|0 Set TCP\_NODELAY to disable Nagle’s algorithm. Default value is 0. _Remark: Writing to the socket is currently not optimized to minimize system calls and reduces the efficiency / effect of TCP\_NODELAY._ tcp\_mss=bytes Set maximum segment size for outgoing TCP packets, expressed in bytes. The following example shows how to setup a listening TCP connection with `ffmpeg`, which is then accessed with `ffplay`: ffmpeg -i input -f format tcp://hostname:port?listen ffplay tcp://hostname:port ### 24.42 tls Transport Layer Security (TLS) / Secure Sockets Layer (SSL) The required syntax for a TLS/SSL url is: tls://hostname:port\[?options\] The following parameters can be set via command line options (or in code via `AVOption`s): ca\_file, cafile=filename A file containing certificate authority (CA) root certificates to treat as trusted. If the linked TLS library contains a default this might not need to be specified for verification to work, but not all libraries and setups have defaults built in. The file must be in OpenSSL PEM format. tls\_verify=1|0 If enabled, try to verify the peer that we are communicating with. Note, if using OpenSSL, this currently only makes sure that the peer certificate is signed by one of the root certificates in the CA database, but it does not validate that the certificate actually matches the host name we are trying to connect to. (With other backends, the host name is validated as well.) This is disabled by default since it requires a CA database to be provided by the caller in many cases. cert\_file, cert=filename A file containing a certificate to use in the handshake with the peer. (When operating as server, in listen mode, this is more often required by the peer, while client certificates only are mandated in certain setups.) key\_file, key=filename A file containing the private key for the certificate. listen=1|0 If enabled, listen for connections on the provided port, and assume the server role in the handshake instead of the client role. http\_proxy The HTTP proxy to tunnel through, e.g. `http://example.com:1234`. The proxy must support the CONNECT method. Example command lines: To create a TLS/SSL server that serves an input stream. ffmpeg -i input -f format tls://hostname:port?listen&cert=server.crt&key=server.key To play back a stream from the TLS/SSL server using `ffplay`: ffplay tls://hostname:port ### 24.43 udp User Datagram Protocol. The required syntax for an UDP URL is: udp://hostname:port\[?options\] options contains a list of &-separated options of the form key\=val. In case threading is enabled on the system, a circular buffer is used to store the incoming data, which allows one to reduce loss of data due to UDP socket buffer overruns. The fifo\_size and overrun\_nonfatal options are related to this buffer. The list of supported options follows. buffer\_size=size Set the UDP maximum socket buffer size in bytes. This is used to set either the receive or send buffer size, depending on what the socket is used for. Default is 32 KB for output, 384 KB for input. See also fifo\_size. bitrate=bitrate If set to nonzero, the output will have the specified constant bitrate if the input has enough packets to sustain it. burst\_bits=bits When using bitrate this specifies the maximum number of bits in packet bursts. localport=port Override the local UDP port to bind with. localaddr=addr Local IP address of a network interface used for sending packets or joining multicast groups. pkt\_size=size Set the size in bytes of UDP packets. reuse=1|0 Explicitly allow or disallow reusing UDP sockets. ttl=ttl Set the time to live value (for multicast only). connect=1|0 Initialize the UDP socket with `connect()`. In this case, the destination address can’t be changed with ff\_udp\_set\_remote\_url later. If the destination address isn’t known at the start, this option can be specified in ff\_udp\_set\_remote\_url, too. This allows finding out the source address for the packets with getsockname, and makes writes return with AVERROR(ECONNREFUSED) if "destination unreachable" is received. For receiving, this gives the benefit of only receiving packets from the specified peer address/port. sources=address\[,address\] Only receive packets sent from the specified addresses. In case of multicast, also subscribe to multicast traffic coming from these addresses only. block=address\[,address\] Ignore packets sent from the specified addresses. In case of multicast, also exclude the source addresses in the multicast subscription. fifo\_size=units Set the UDP receiving circular buffer size, expressed as a number of packets with size of 188 bytes. If not specified defaults to 7\*4096. overrun\_nonfatal=1|0 Survive in case of UDP receiving circular buffer overrun. Default value is 0. timeout=microseconds Set raise error timeout, expressed in microseconds. This option is only relevant in read mode: if no data arrived in more than this time interval, raise error. broadcast=1|0 Explicitly allow or disallow UDP broadcasting. Note that broadcasting may not work properly on networks having a broadcast storm protection. #### 24.43.1 Examples * Use `ffmpeg` to stream over UDP to a remote endpoint: ffmpeg -i input -f format udp://hostname:port * Use `ffmpeg` to stream in mpegts format over UDP using 188 sized UDP packets, using a large input buffer: ffmpeg -i input -f mpegts udp://hostname:port?pkt\_size=188&buffer\_size=65535 * Use `ffmpeg` to receive over UDP from a remote endpoint: ffmpeg -i udp://\[multicast-address\]:port ... ### 24.44 unix Unix local socket The required syntax for a Unix socket URL is: unix://filepath The following parameters can be set via command line options (or in code via `AVOption`s): timeout Timeout in ms. listen Create the Unix socket in listening mode. ### 24.45 zmq ZeroMQ asynchronous messaging using the libzmq library. This library supports unicast streaming to multiple clients without relying on an external server. The required syntax for streaming or connecting to a stream is: zmq:tcp://ip-address:port Example: Create a localhost stream on port 5555: ffmpeg -re -i input -f mpegts zmq:tcp://127.0.0.1:5555 Multiple clients may connect to the stream using: ffplay zmq:tcp://127.0.0.1:5555 Streaming to multiple clients is implemented using a ZeroMQ Pub-Sub pattern. The server side binds to a port and publishes data. Clients connect to the server (via IP address/port) and subscribe to the stream. The order in which the server and client start generally does not matter. ffmpeg must be compiled with the –enable-libzmq option to support this protocol. Options can be set on the `ffmpeg`/`ffplay` command line. The following options are supported: pkt\_size Forces the maximum packet size for sending/receiving data. The default value is 131,072 bytes. On the server side, this sets the maximum size of sent packets via ZeroMQ. On the clients, it sets an internal buffer size for receiving packets. Note that pkt\_size on the clients should be equal to or greater than pkt\_size on the server. Otherwise the received message may be truncated causing decoding errors. ## 25 Device Options The libavdevice library provides the same interface as libavformat. Namely, an input device is considered like a demuxer, and an output device like a muxer, and the interface and generic device options are the same provided by libavformat (see the ffmpeg-formats manual). In addition each input or output device may support so-called private options, which are specific for that component. Options may be set by specifying -option value in the FFmpeg tools, or by setting the value explicitly in the device `AVFormatContext` options or using the libavutil/opt.h API for programmatic use. ## 26 Input Devices Input devices are configured elements in FFmpeg which enable accessing the data coming from a multimedia device attached to your system. When you configure your FFmpeg build, all the supported input devices are enabled by default. You can list all available ones using the configure option "–list-indevs". You can disable all the input devices using the configure option "–disable-indevs", and selectively enable an input device using the option "–enable-indev=INDEV", or you can disable a particular input device using the option "–disable-indev=INDEV". The option "-devices" of the ff\* tools will display the list of supported input devices. A description of the currently available input devices follows. ### 26.1 alsa ALSA (Advanced Linux Sound Architecture) input device. To enable this input device during configuration you need libasound installed on your system. This device allows capturing from an ALSA device. The name of the device to capture has to be an ALSA card identifier. An ALSA identifier has the syntax: hw:CARD\[,DEV\[,SUBDEV\]\] where the DEV and SUBDEV components are optional. The three arguments (in order: CARD,DEV,SUBDEV) specify card number or identifier, device number and subdevice number (-1 means any). To see the list of cards currently recognized by your system check the files /proc/asound/cards and /proc/asound/devices. For example to capture with `ffmpeg` from an ALSA device with card id 0, you may run the command: ffmpeg -f alsa -i hw:0 alsaout.wav For more information see: http://www.alsa-project.org/alsa-doc/alsa-lib/pcm.html #### 26.1.1 Options sample\_rate Set the sample rate in Hz. Default is 48000. channels Set the number of channels. Default is 2. ### 26.2 android\_camera Android camera input device. This input devices uses the Android Camera2 NDK API which is available on devices with API level 24+. The availability of android\_camera is autodetected during configuration. This device allows capturing from all cameras on an Android device, which are integrated into the Camera2 NDK API. The available cameras are enumerated internally and can be selected with the camera\_index parameter. The input file string is discarded. Generally the back facing camera has index 0 while the front facing camera has index 1. #### 26.2.1 Options video\_size Set the video size given as a string such as 640x480 or hd720. Falls back to the first available configuration reported by Android if requested video size is not available or by default. framerate Set the video framerate. Falls back to the first available configuration reported by Android if requested framerate is not available or by default (-1). camera\_index Set the index of the camera to use. Default is 0. input\_queue\_size Set the maximum number of frames to buffer. Default is 5. ### 26.3 avfoundation AVFoundation input device. AVFoundation is the currently recommended framework by Apple for streamgrabbing on OSX >= 10.7 as well as on iOS. The input filename has to be given in the following syntax: \-i "\[\[VIDEO\]:\[AUDIO\]\]" The first entry selects the video input while the latter selects the audio input. The stream has to be specified by the device name or the device index as shown by the device list. Alternatively, the video and/or audio input device can be chosen by index using the \-video\_device\_index <INDEX> and/or \-audio\_device\_index <INDEX> , overriding any device name or index given in the input filename. All available devices can be enumerated by using \-list\_devices true, listing all device names and corresponding indices. There are two device name aliases: `default` Select the AVFoundation default device of the corresponding type. `none` Do not record the corresponding media type. This is equivalent to specifying an empty device name or index. #### 26.3.1 Options AVFoundation supports the following options: \-list\_devices <TRUE|FALSE> If set to true, a list of all available input devices is given showing all device names and indices. \-video\_device\_index <INDEX> Specify the video device by its index. Overrides anything given in the input filename. \-audio\_device\_index <INDEX> Specify the audio device by its index. Overrides anything given in the input filename. \-pixel\_format <FORMAT> Request the video device to use a specific pixel format. If the specified format is not supported, a list of available formats is given and the first one in this list is used instead. Available pixel formats are: `monob, rgb555be, rgb555le, rgb565be, rgb565le, rgb24, bgr24, 0rgb, bgr0, 0bgr, rgb0, bgr48be, uyvy422, yuva444p, yuva444p16le, yuv444p, yuv422p16, yuv422p10, yuv444p10, yuv420p, nv12, yuyv422, gray` \-framerate Set the grabbing frame rate. Default is `ntsc`, corresponding to a frame rate of `30000/1001`. \-video\_size Set the video frame size. \-capture\_cursor Capture the mouse pointer. Default is 0. \-capture\_mouse\_clicks Capture the screen mouse clicks. Default is 0. \-capture\_raw\_data Capture the raw device data. Default is 0. Using this option may result in receiving the underlying data delivered to the AVFoundation framework. E.g. for muxed devices that sends raw DV data to the framework (like tape-based camcorders), setting this option to false results in extracted video frames captured in the designated pixel format only. Setting this option to true results in receiving the raw DV stream untouched. #### 26.3.2 Examples * Print the list of AVFoundation supported devices and exit: $ ffmpeg -f avfoundation -list\_devices true -i "" * Record video from video device 0 and audio from audio device 0 into out.avi: $ ffmpeg -f avfoundation -i "0:0" out.avi * Record video from video device 2 and audio from audio device 1 into out.avi: $ ffmpeg -f avfoundation -video\_device\_index 2 -i ":1" out.avi * Record video from the system default video device using the pixel format bgr0 and do not record any audio into out.avi: $ ffmpeg -f avfoundation -pixel\_format bgr0 -i "default:none" out.avi * Record raw DV data from a suitable input device and write the output into out.dv: $ ffmpeg -f avfoundation -capture\_raw\_data true -i "zr100:none" out.dv ### 26.4 decklink The decklink input device provides capture capabilities for Blackmagic DeckLink devices. To enable this input device, you need the Blackmagic DeckLink SDK and you need to configure with the appropriate `--extra-cflags` and `--extra-ldflags`. On Windows, you need to run the IDL files through `widl`. DeckLink is very picky about the formats it supports. Pixel format of the input can be set with raw\_format. Framerate and video size must be determined for your device with `-list_formats 1`. Audio sample rate is always 48 kHz and the number of channels can be 2, 8 or 16. Note that all audio channels are bundled in one single audio track. #### 26.4.1 Options list\_devices If set to true, print a list of devices and exit. Defaults to false. This option is deprecated, please use the `-sources` option of ffmpeg to list the available input devices. list\_formats If set to true, print a list of supported formats and exit. Defaults to false. format\_code <FourCC> This sets the input video format to the format given by the FourCC. To see the supported values of your device(s) use list\_formats. Note that there is a FourCC 'pal ' that can also be used as pal (3 letters). Default behavior is autodetection of the input video format, if the hardware supports it. raw\_format Set the pixel format of the captured video. Available values are: ‘auto’ This is the default which means 8-bit YUV 422 or 8-bit ARGB if format autodetection is used, 8-bit YUV 422 otherwise. ‘uyvy422’ 8-bit YUV 422. ‘yuv422p10’ 10-bit YUV 422. ‘argb’ 8-bit RGB. ‘bgra’ 8-bit RGB. ‘rgb10’ 10-bit RGB. teletext\_lines If set to nonzero, an additional teletext stream will be captured from the vertical ancillary data. Both SD PAL (576i) and HD (1080i or 1080p) sources are supported. In case of HD sources, OP47 packets are decoded. This option is a bitmask of the SD PAL VBI lines captured, specifically lines 6 to 22, and lines 318 to 335. Line 6 is the LSB in the mask. Selected lines which do not contain teletext information will be ignored. You can use the special all constant to select all possible lines, or standard to skip lines 6, 318 and 319, which are not compatible with all receivers. For SD sources, ffmpeg needs to be compiled with `--enable-libzvbi`. For HD sources, on older (pre-4K) DeckLink card models you have to capture in 10 bit mode. channels Defines number of audio channels to capture. Must be ‘2’, ‘8’ or ‘16’. Defaults to ‘2’. duplex\_mode Sets the decklink device duplex/profile mode. Must be ‘unset’, ‘half’, ‘full’, ‘one\_sub\_device\_full’, ‘one\_sub\_device\_half’, ‘two\_sub\_device\_full’, ‘four\_sub\_device\_half’ Defaults to ‘unset’. Note: DeckLink SDK 11.0 have replaced the duplex property by a profile property. For the DeckLink Duo 2 and DeckLink Quad 2, a profile is shared between any 2 sub-devices that utilize the same connectors. For the DeckLink 8K Pro, a profile is shared between all 4 sub-devices. So DeckLink 8K Pro support four profiles. Valid profile modes for DeckLink 8K Pro(with DeckLink SDK >= 11.0): ‘one\_sub\_device\_full’, ‘one\_sub\_device\_half’, ‘two\_sub\_device\_full’, ‘four\_sub\_device\_half’ Valid profile modes for DeckLink Quad 2 and DeckLink Duo 2: ‘half’, ‘full’ timecode\_format Timecode type to include in the frame and video stream metadata. Must be ‘none’, ‘rp188vitc’, ‘rp188vitc2’, ‘rp188ltc’, ‘rp188hfr’, ‘rp188any’, ‘vitc’, ‘vitc2’, or ‘serial’. Defaults to ‘none’ (not included). In order to properly support 50/60 fps timecodes, the ordering of the queried timecode types for ‘rp188any’ is HFR, VITC1, VITC2 and LTC for >30 fps content. Note that this is slightly different to the ordering used by the DeckLink API, which is HFR, VITC1, LTC, VITC2. video\_input Sets the video input source. Must be ‘unset’, ‘sdi’, ‘hdmi’, ‘optical\_sdi’, ‘component’, ‘composite’ or ‘s\_video’. Defaults to ‘unset’. audio\_input Sets the audio input source. Must be ‘unset’, ‘embedded’, ‘aes\_ebu’, ‘analog’, ‘analog\_xlr’, ‘analog\_rca’ or ‘microphone’. Defaults to ‘unset’. video\_pts Sets the video packet timestamp source. Must be ‘video’, ‘audio’, ‘reference’, ‘wallclock’ or ‘abs\_wallclock’. Defaults to ‘video’. audio\_pts Sets the audio packet timestamp source. Must be ‘video’, ‘audio’, ‘reference’, ‘wallclock’ or ‘abs\_wallclock’. Defaults to ‘audio’. draw\_bars If set to ‘true’, color bars are drawn in the event of a signal loss. Defaults to ‘true’. This option is deprecated, please use the `signal_loss_action` option. signal\_loss\_action Sets the action to take in the event of a signal loss. Accepts one of the following values: 1, none Do nothing on signal loss. This usually results in black frames. 2, bars Draw color bars on signal loss. Only supported for 8-bit input signals. 3, repeat Repeat the last video frame on signal loss. Defaults to ‘bars’. queue\_size Sets maximum input buffer size in bytes. If the buffering reaches this value, incoming frames will be dropped. Defaults to ‘1073741824’. audio\_depth Sets the audio sample bit depth. Must be ‘16’ or ‘32’. Defaults to ‘16’. decklink\_copyts If set to true, timestamps are forwarded as they are without removing the initial offset. Defaults to false. timestamp\_align Capture start time alignment in seconds. If set to nonzero, input frames are dropped till the system timestamp aligns with configured value. Alignment difference of up to one frame duration is tolerated. This is useful for maintaining input synchronization across N different hardware devices deployed for ’N-way’ redundancy. The system time of different hardware devices should be synchronized with protocols such as NTP or PTP, before using this option. Note that this method is not foolproof. In some border cases input synchronization may not happen due to thread scheduling jitters in the OS. Either sync could go wrong by 1 frame or in a rarer case timestamp\_align seconds. Defaults to ‘0’. wait\_for\_tc (_bool_) Drop frames till a frame with timecode is received. Sometimes serial timecode isn’t received with the first input frame. If that happens, the stored stream timecode will be inaccurate. If this option is set to true, input frames are dropped till a frame with timecode is received. Option timecode\_format must be specified. Defaults to false. enable\_klv(_bool_) If set to true, extracts KLV data from VANC and outputs KLV packets. KLV VANC packets are joined based on MID and PSC fields and aggregated into one KLV packet. Defaults to false. #### 26.4.2 Examples * List input devices: ffmpeg -sources decklink * List supported formats: ffmpeg -f decklink -list\_formats 1 -i 'Intensity Pro' * Capture video clip at 1080i50: ffmpeg -format\_code Hi50 -f decklink -i 'Intensity Pro' -c:a copy -c:v copy output.avi * Capture video clip at 1080i50 10 bit: ffmpeg -raw\_format yuv422p10 -format\_code Hi50 -f decklink -i 'UltraStudio Mini Recorder' -c:a copy -c:v copy output.avi * Capture video clip at 1080i50 with 16 audio channels: ffmpeg -channels 16 -format\_code Hi50 -f decklink -i 'UltraStudio Mini Recorder' -c:a copy -c:v copy output.avi ### 26.5 dshow Windows DirectShow input device. DirectShow support is enabled when FFmpeg is built with the mingw-w64 project. Currently only audio and video devices are supported. Multiple devices may be opened as separate inputs, but they may also be opened on the same input, which should improve synchronism between them. The input name should be in the format: TYPE\=NAME\[:TYPE\=NAME\] where TYPE can be either audio or video, and NAME is the device’s name or alternative name.. #### 26.5.1 Options If no options are specified, the device’s defaults are used. If the device does not support the requested options, it will fail to open. video\_size Set the video size in the captured video. framerate Set the frame rate in the captured video. sample\_rate Set the sample rate (in Hz) of the captured audio. sample\_size Set the sample size (in bits) of the captured audio. channels Set the number of channels in the captured audio. list\_devices If set to true, print a list of devices and exit. list\_options If set to true, print a list of selected device’s options and exit. video\_device\_number Set video device number for devices with the same name (starts at 0, defaults to 0). audio\_device\_number Set audio device number for devices with the same name (starts at 0, defaults to 0). pixel\_format Select pixel format to be used by DirectShow. This may only be set when the video codec is not set or set to rawvideo. audio\_buffer\_size Set audio device buffer size in milliseconds (which can directly impact latency, depending on the device). Defaults to using the audio device’s default buffer size (typically some multiple of 500ms). Setting this value too low can degrade performance. See also http://msdn.microsoft.com/en-us/library/windows/desktop/dd377582(v=vs.85).aspx video\_pin\_name Select video capture pin to use by name or alternative name. audio\_pin\_name Select audio capture pin to use by name or alternative name. crossbar\_video\_input\_pin\_number Select video input pin number for crossbar device. This will be routed to the crossbar device’s Video Decoder output pin. Note that changing this value can affect future invocations (sets a new default) until system reboot occurs. crossbar\_audio\_input\_pin\_number Select audio input pin number for crossbar device. This will be routed to the crossbar device’s Audio Decoder output pin. Note that changing this value can affect future invocations (sets a new default) until system reboot occurs. show\_video\_device\_dialog If set to true, before capture starts, popup a display dialog to the end user, allowing them to change video filter properties and configurations manually. Note that for crossbar devices, adjusting values in this dialog may be needed at times to toggle between PAL (25 fps) and NTSC (29.97) input frame rates, sizes, interlacing, etc. Changing these values can enable different scan rates/frame rates and avoiding green bars at the bottom, flickering scan lines, etc. Note that with some devices, changing these properties can also affect future invocations (sets new defaults) until system reboot occurs. show\_audio\_device\_dialog If set to true, before capture starts, popup a display dialog to the end user, allowing them to change audio filter properties and configurations manually. show\_video\_crossbar\_connection\_dialog If set to true, before capture starts, popup a display dialog to the end user, allowing them to manually modify crossbar pin routings, when it opens a video device. show\_audio\_crossbar\_connection\_dialog If set to true, before capture starts, popup a display dialog to the end user, allowing them to manually modify crossbar pin routings, when it opens an audio device. show\_analog\_tv\_tuner\_dialog If set to true, before capture starts, popup a display dialog to the end user, allowing them to manually modify TV channels and frequencies. show\_analog\_tv\_tuner\_audio\_dialog If set to true, before capture starts, popup a display dialog to the end user, allowing them to manually modify TV audio (like mono vs. stereo, Language A,B or C). audio\_device\_load Load an audio capture filter device from file instead of searching it by name. It may load additional parameters too, if the filter supports the serialization of its properties to. To use this an audio capture source has to be specified, but it can be anything even fake one. audio\_device\_save Save the currently used audio capture filter device and its parameters (if the filter supports it) to a file. If a file with the same name exists it will be overwritten. video\_device\_load Load a video capture filter device from file instead of searching it by name. It may load additional parameters too, if the filter supports the serialization of its properties to. To use this a video capture source has to be specified, but it can be anything even fake one. video\_device\_save Save the currently used video capture filter device and its parameters (if the filter supports it) to a file. If a file with the same name exists it will be overwritten. use\_video\_device\_timestamps If set to false, the timestamp for video frames will be derived from the wallclock instead of the timestamp provided by the capture device. This allows working around devices that provide unreliable timestamps. #### 26.5.2 Examples * Print the list of DirectShow supported devices and exit: $ ffmpeg -list\_devices true -f dshow -i dummy * Open video device Camera: $ ffmpeg -f dshow -i video="Camera" * Open second video device with name Camera: $ ffmpeg -f dshow -video\_device\_number 1 -i video="Camera" * Open video device Camera and audio device Microphone: $ ffmpeg -f dshow -i video="Camera":audio="Microphone" * Print the list of supported options in selected device and exit: $ ffmpeg -list\_options true -f dshow -i video="Camera" * Specify pin names to capture by name or alternative name, specify alternative device name: $ ffmpeg -f dshow -audio\_pin\_name "Audio Out" -video\_pin\_name 2 -i video=video="@device\_pnp\_\\\\?\\pci#ven\_1a0a&dev\_6200&subsys\_62021461&rev\_01#4&e2c7dd6&0&00e1#{65e8773d-8f56-11d0-a3b9-00a0c9223196}\\{ca465100-deb0-4d59-818f-8c477184adf6}":audio="Microphone" * Configure a crossbar device, specifying crossbar pins, allow user to adjust video capture properties at startup: $ ffmpeg -f dshow -show\_video\_device\_dialog true -crossbar\_video\_input\_pin\_number 0 -crossbar\_audio\_input\_pin\_number 3 -i video="AVerMedia BDA Analog Capture":audio="AVerMedia BDA Analog Capture" ### 26.6 fbdev Linux framebuffer input device. The Linux framebuffer is a graphic hardware-independent abstraction layer to show graphics on a computer monitor, typically on the console. It is accessed through a file device node, usually /dev/fb0. For more detailed information read the file Documentation/fb/framebuffer.txt included in the Linux source tree. See also http://linux-fbdev.sourceforge.net/, and fbset(1). To record from the framebuffer device /dev/fb0 with `ffmpeg`: ffmpeg -f fbdev -framerate 10 -i /dev/fb0 out.avi You can take a single screenshot image with the command: ffmpeg -f fbdev -framerate 1 -i /dev/fb0 -frames:v 1 screenshot.jpeg #### 26.6.1 Options framerate Set the frame rate. Default is 25. ### 26.7 gdigrab Win32 GDI-based screen capture device. This device allows you to capture a region of the display on Windows. Amongst options for the imput filenames are such elements as: desktop or title=window\_title or hwnd=window\_hwnd The first option will capture the entire desktop, or a fixed region of the desktop. The second and third options will instead capture the contents of a single window, regardless of its position on the screen. For example, to grab the entire desktop using `ffmpeg`: ffmpeg -f gdigrab -framerate 6 -i desktop out.mpg Grab a 640x480 region at position `10,20`: ffmpeg -f gdigrab -framerate 6 -offset\_x 10 -offset\_y 20 -video\_size vga -i desktop out.mpg Grab the contents of the window named "Calculator" ffmpeg -f gdigrab -framerate 6 -i title=Calculator out.mpg #### 26.7.1 Options draw\_mouse Specify whether to draw the mouse pointer. Use the value `0` to not draw the pointer. Default value is `1`. framerate Set the grabbing frame rate. Default value is `ntsc`, corresponding to a frame rate of `30000/1001`. show\_region Show grabbed region on screen. If show\_region is specified with `1`, then the grabbing region will be indicated on screen. With this option, it is easy to know what is being grabbed if only a portion of the screen is grabbed. Note that show\_region is incompatible with grabbing the contents of a single window. For example: ffmpeg -f gdigrab -show\_region 1 -framerate 6 -video\_size cif -offset\_x 10 -offset\_y 20 -i desktop out.mpg video\_size Set the video frame size. The default is to capture the full screen if desktop is selected, or the full window size if title=window\_title is selected. offset\_x When capturing a region with video\_size, set the distance from the left edge of the screen or desktop. Note that the offset calculation is from the top left corner of the primary monitor on Windows. If you have a monitor positioned to the left of your primary monitor, you will need to use a negative offset\_x value to move the region to that monitor. offset\_y When capturing a region with video\_size, set the distance from the top edge of the screen or desktop. Note that the offset calculation is from the top left corner of the primary monitor on Windows. If you have a monitor positioned above your primary monitor, you will need to use a negative offset\_y value to move the region to that monitor. ### 26.8 iec61883 FireWire DV/HDV input device using libiec61883. To enable this input device, you need libiec61883, libraw1394 and libavc1394 installed on your system. Use the configure option `--enable-libiec61883` to compile with the device enabled. The iec61883 capture device supports capturing from a video device connected via IEEE1394 (FireWire), using libiec61883 and the new Linux FireWire stack (juju). This is the default DV/HDV input method in Linux Kernel 2.6.37 and later, since the old FireWire stack was removed. Specify the FireWire port to be used as input file, or "auto" to choose the first port connected. #### 26.8.1 Options dvtype Override autodetection of DV/HDV. This should only be used if auto detection does not work, or if usage of a different device type should be prohibited. Treating a DV device as HDV (or vice versa) will not work and result in undefined behavior. The values auto, dv and hdv are supported. dvbuffer Set maximum size of buffer for incoming data, in frames. For DV, this is an exact value. For HDV, it is not frame exact, since HDV does not have a fixed frame size. dvguid Select the capture device by specifying its GUID. Capturing will only be performed from the specified device and fails if no device with the given GUID is found. This is useful to select the input if multiple devices are connected at the same time. Look at /sys/bus/firewire/devices to find out the GUIDs. #### 26.8.2 Examples * Grab and show the input of a FireWire DV/HDV device. ffplay -f iec61883 -i auto * Grab and record the input of a FireWire DV/HDV device, using a packet buffer of 100000 packets if the source is HDV. ffmpeg -f iec61883 -i auto -dvbuffer 100000 out.mpg ### 26.9 jack JACK input device. To enable this input device during configuration you need libjack installed on your system. A JACK input device creates one or more JACK writable clients, one for each audio channel, with name client\_name:input\_N, where client\_name is the name provided by the application, and N is a number which identifies the channel. Each writable client will send the acquired data to the FFmpeg input device. Once you have created one or more JACK readable clients, you need to connect them to one or more JACK writable clients. To connect or disconnect JACK clients you can use the `jack_connect` and `jack_disconnect` programs, or do it through a graphical interface, for example with `qjackctl`. To list the JACK clients and their properties you can invoke the command `jack_lsp`. Follows an example which shows how to capture a JACK readable client with `ffmpeg`. \# Create a JACK writable client with name "ffmpeg". $ ffmpeg -f jack -i ffmpeg -y out.wav # Start the sample jack\_metro readable client. $ jack\_metro -b 120 -d 0.2 -f 4000 # List the current JACK clients. $ jack\_lsp -c system:capture\_1 system:capture\_2 system:playback\_1 system:playback\_2 ffmpeg:input\_1 metro:120\_bpm # Connect metro to the ffmpeg writable client. $ jack\_connect metro:120\_bpm ffmpeg:input\_1 For more information read: http://jackaudio.org/ #### 26.9.1 Options channels Set the number of channels. Default is 2. ### 26.10 kmsgrab KMS video input device. Captures the KMS scanout framebuffer associated with a specified CRTC or plane as a DRM object that can be passed to other hardware functions. Requires either DRM master or CAP\_SYS\_ADMIN to run. If you don’t understand what all of that means, you probably don’t want this. Look at x11grab instead. #### 26.10.1 Options device DRM device to capture on. Defaults to /dev/dri/card0. format Pixel format of the framebuffer. This can be autodetected if you are running Linux 5.7 or later, but needs to be provided for earlier versions. Defaults to bgr0, which is the most common format used by the Linux console and Xorg X server. format\_modifier Format modifier to signal on output frames. This is necessary to import correctly into some APIs. It can be autodetected if you are running Linux 5.7 or later, but will need to be provided explicitly when needed in earlier versions. See the libdrm documentation for possible values. crtc\_id KMS CRTC ID to define the capture source. The first active plane on the given CRTC will be used. plane\_id KMS plane ID to define the capture source. Defaults to the first active plane found if neither crtc\_id nor plane\_id are specified. framerate Framerate to capture at. This is not synchronised to any page flipping or framebuffer changes - it just defines the interval at which the framebuffer is sampled. Sampling faster than the framebuffer update rate will generate independent frames with the same content. Defaults to `30`. #### 26.10.2 Examples * Capture from the first active plane, download the result to normal frames and encode. This will only work if the framebuffer is both linear and mappable - if not, the result may be scrambled or fail to download. ffmpeg -f kmsgrab -i - -vf 'hwdownload,format=bgr0' output.mp4 * Capture from CRTC ID 42 at 60fps, map the result to VAAPI, convert to NV12 and encode as H.264. ffmpeg -crtc\_id 42 -framerate 60 -f kmsgrab -i - -vf 'hwmap=derive\_device=vaapi,scale\_vaapi=w=1920:h=1080:format=nv12' -c:v h264\_vaapi output.mp4 * To capture only part of a plane the output can be cropped - this can be used to capture a single window, as long as it has a known absolute position and size. For example, to capture and encode the middle quarter of a 1920x1080 plane: ffmpeg -f kmsgrab -i - -vf 'hwmap=derive\_device=vaapi,crop=960:540:480:270,scale\_vaapi=960:540:nv12' -c:v h264\_vaapi output.mp4 ### 26.11 lavfi Libavfilter input virtual device. This input device reads data from the open output pads of a libavfilter filtergraph. For each filtergraph open output, the input device will create a corresponding stream which is mapped to the generated output. The filtergraph is specified through the option graph. #### 26.11.1 Options graph Specify the filtergraph to use as input. Each video open output must be labelled by a unique string of the form "outN", where N is a number starting from 0 corresponding to the mapped input stream generated by the device. The first unlabelled output is automatically assigned to the "out0" label, but all the others need to be specified explicitly. The suffix "+subcc" can be appended to the output label to create an extra stream with the closed captions packets attached to that output (experimental; only for EIA-608 / CEA-708 for now). The subcc streams are created after all the normal streams, in the order of the corresponding stream. For example, if there is "out19+subcc", "out7+subcc" and up to "out42", the stream #43 is subcc for stream #7 and stream #44 is subcc for stream #19. If not specified defaults to the filename specified for the input device. graph\_file Set the filename of the filtergraph to be read and sent to the other filters. Syntax of the filtergraph is the same as the one specified by the option graph. dumpgraph Dump graph to stderr. #### 26.11.2 Examples * Create a color video stream and play it back with `ffplay`: ffplay -f lavfi -graph "color=c=pink \[out0\]" dummy * As the previous example, but use filename for specifying the graph description, and omit the "out0" label: ffplay -f lavfi color=c=pink * Create three different video test filtered sources and play them: ffplay -f lavfi -graph "testsrc \[out0\]; testsrc,hflip \[out1\]; testsrc,negate \[out2\]" test3 * Read an audio stream from a file using the amovie source and play it back with `ffplay`: ffplay -f lavfi "amovie=test.wav" * Read an audio stream and a video stream and play it back with `ffplay`: ffplay -f lavfi "movie=test.avi\[out0\];amovie=test.wav\[out1\]" * Dump decoded frames to images and Closed Captions to an RCWT backup: ffmpeg -f lavfi -i "movie=test.ts\[out0+subcc\]" -map v frame%08d.png -map s -c copy -f rcwt subcc.bin ### 26.12 libcdio Audio-CD input device based on libcdio. To enable this input device during configuration you need libcdio installed on your system. It requires the configure option `--enable-libcdio`. This device allows playing and grabbing from an Audio-CD. For example to copy with `ffmpeg` the entire Audio-CD in /dev/sr0, you may run the command: ffmpeg -f libcdio -i /dev/sr0 cd.wav #### 26.12.1 Options speed Set drive reading speed. Default value is 0. The speed is specified CD-ROM speed units. The speed is set through the libcdio `cdio_cddap_speed_set` function. On many CD-ROM drives, specifying a value too large will result in using the fastest speed. paranoia\_mode Set paranoia recovery mode flags. It accepts one of the following values: ‘disable’ ‘verify’ ‘overlap’ ‘neverskip’ ‘full’ Default value is ‘disable’. For more information about the available recovery modes, consult the paranoia project documentation. ### 26.13 libdc1394 IIDC1394 input device, based on libdc1394 and libraw1394. Requires the configure option `--enable-libdc1394`. #### 26.13.1 Options framerate Set the frame rate. Default is `ntsc`, corresponding to a frame rate of `30000/1001`. pixel\_format Select the pixel format. Default is `uyvy422`. video\_size Set the video size given as a string such as `640x480` or `hd720`. Default is `qvga`. ### 26.14 openal The OpenAL input device provides audio capture on all systems with a working OpenAL 1.1 implementation. To enable this input device during configuration, you need OpenAL headers and libraries installed on your system, and need to configure FFmpeg with `--enable-openal`. OpenAL headers and libraries should be provided as part of your OpenAL implementation, or as an additional download (an SDK). Depending on your installation you may need to specify additional flags via the `--extra-cflags` and `--extra-ldflags` for allowing the build system to locate the OpenAL headers and libraries. An incomplete list of OpenAL implementations follows: **Creative** The official Windows implementation, providing hardware acceleration with supported devices and software fallback. See http://openal.org/. **OpenAL Soft** Portable, open source (LGPL) software implementation. Includes backends for the most common sound APIs on the Windows, Linux, Solaris, and BSD operating systems. See http://kcat.strangesoft.net/openal.html. **Apple** OpenAL is part of Core Audio, the official Mac OS X Audio interface. See http://developer.apple.com/technologies/mac/audio-and-video.html This device allows one to capture from an audio input device handled through OpenAL. You need to specify the name of the device to capture in the provided filename. If the empty string is provided, the device will automatically select the default device. You can get the list of the supported devices by using the option list\_devices. #### 26.14.1 Options channels Set the number of channels in the captured audio. Only the values 1 (monaural) and 2 (stereo) are currently supported. Defaults to 2. sample\_size Set the sample size (in bits) of the captured audio. Only the values 8 and 16 are currently supported. Defaults to 16. sample\_rate Set the sample rate (in Hz) of the captured audio. Defaults to 44.1k. list\_devices If set to true, print a list of devices and exit. Defaults to false. #### 26.14.2 Examples Print the list of OpenAL supported devices and exit: $ ffmpeg -list\_devices true -f openal -i dummy out.ogg Capture from the OpenAL device DR-BT101 via PulseAudio: $ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out.ogg Capture from the default device (note the empty string ” as filename): $ ffmpeg -f openal -i '' out.ogg Capture from two devices simultaneously, writing to two different files, within the same `ffmpeg` command: $ ffmpeg -f openal -i 'DR-BT101 via PulseAudio' out1.ogg -f openal -i 'ALSA Default' out2.ogg Note: not all OpenAL implementations support multiple simultaneous capture - try the latest OpenAL Soft if the above does not work. ### 26.15 oss Open Sound System input device. The filename to provide to the input device is the device node representing the OSS input device, and is usually set to /dev/dsp. For example to grab from /dev/dsp using `ffmpeg` use the command: ffmpeg -f oss -i /dev/dsp /tmp/oss.wav For more information about OSS see: http://manuals.opensound.com/usersguide/dsp.html #### 26.15.1 Options sample\_rate Set the sample rate in Hz. Default is 48000. channels Set the number of channels. Default is 2. ### 26.16 pulse PulseAudio input device. To enable this output device you need to configure FFmpeg with `--enable-libpulse`. The filename to provide to the input device is a source device or the string "default" To list the PulseAudio source devices and their properties you can invoke the command `pactl list sources`. More information about PulseAudio can be found on http://www.pulseaudio.org. #### 26.16.1 Options server Connect to a specific PulseAudio server, specified by an IP address. Default server is used when not provided. name Specify the application name PulseAudio will use when showing active clients, by default it is the `LIBAVFORMAT_IDENT` string. stream\_name Specify the stream name PulseAudio will use when showing active streams, by default it is "record". sample\_rate Specify the samplerate in Hz, by default 48kHz is used. channels Specify the channels in use, by default 2 (stereo) is set. frame\_size This option does nothing and is deprecated. fragment\_size Specify the size in bytes of the minimal buffering fragment in PulseAudio, it will affect the audio latency. By default it is set to 50 ms amount of data. wallclock Set the initial PTS using the current time. Default is 1. #### 26.16.2 Examples Record a stream from default device: ffmpeg -f pulse -i default /tmp/pulse.wav ### 26.17 sndio sndio input device. To enable this input device during configuration you need libsndio installed on your system. The filename to provide to the input device is the device node representing the sndio input device, and is usually set to /dev/audio0. For example to grab from /dev/audio0 using `ffmpeg` use the command: ffmpeg -f sndio -i /dev/audio0 /tmp/oss.wav #### 26.17.1 Options sample\_rate Set the sample rate in Hz. Default is 48000. channels Set the number of channels. Default is 2. ### 26.18 video4linux2, v4l2 Video4Linux2 input video device. "v4l2" can be used as alias for "video4linux2". If FFmpeg is built with v4l-utils support (by using the `--enable-libv4l2` configure option), it is possible to use it with the `-use_libv4l2` input device option. The name of the device to grab is a file device node, usually Linux systems tend to automatically create such nodes when the device (e.g. an USB webcam) is plugged into the system, and has a name of the kind /dev/videoN, where N is a number associated to the device. Video4Linux2 devices usually support a limited set of widthxheight sizes and frame rates. You can check which are supported using `-list_formats all` for Video4Linux2 devices. Some devices, like TV cards, support one or more standards. It is possible to list all the supported standards using `-list_standards all`. The time base for the timestamps is 1 microsecond. Depending on the kernel version and configuration, the timestamps may be derived from the real time clock (origin at the Unix Epoch) or the monotonic clock (origin usually at boot time, unaffected by NTP or manual changes to the clock). The \-timestamps abs or \-ts abs option can be used to force conversion into the real time clock. Some usage examples of the video4linux2 device with `ffmpeg` and `ffplay`: * List supported formats for a video4linux2 device: ffplay -f video4linux2 -list\_formats all /dev/video0 * Grab and show the input of a video4linux2 device: ffplay -f video4linux2 -framerate 30 -video\_size hd720 /dev/video0 * Grab and record the input of a video4linux2 device, leave the frame rate and size as previously set: ffmpeg -f video4linux2 -input\_format mjpeg -i /dev/video0 out.mpeg For more information about Video4Linux, check http://linuxtv.org/. #### 26.18.1 Options standard Set the standard. Must be the name of a supported standard. To get a list of the supported standards, use the list\_standards option. channel Set the input channel number. Default to -1, which means using the previously selected channel. video\_size Set the video frame size. The argument must be a string in the form WIDTHxHEIGHT or a valid size abbreviation. pixel\_format Select the pixel format (only valid for raw video input). input\_format Set the preferred pixel format (for raw video) or a codec name. This option allows one to select the input format, when several are available. framerate Set the preferred video frame rate. list\_formats List available formats (supported pixel formats, codecs, and frame sizes) and exit. Available values are: ‘all’ Show all available (compressed and non-compressed) formats. ‘raw’ Show only raw video (non-compressed) formats. ‘compressed’ Show only compressed formats. list\_standards List supported standards and exit. Available values are: ‘all’ Show all supported standards. timestamps, ts Set type of timestamps for grabbed frames. Available values are: ‘default’ Use timestamps from the kernel. ‘abs’ Use absolute timestamps (wall clock). ‘mono2abs’ Force conversion from monotonic to absolute timestamps. Default value is `default`. use\_libv4l2 Use libv4l2 (v4l-utils) conversion functions. Default is 0. ### 26.19 vfwcap VfW (Video for Windows) capture input device. The filename passed as input is the capture driver number, ranging from 0 to 9. You may use "list" as filename to print a list of drivers. Any other filename will be interpreted as device number 0. #### 26.19.1 Options video\_size Set the video frame size. framerate Set the grabbing frame rate. Default value is `ntsc`, corresponding to a frame rate of `30000/1001`. ### 26.20 x11grab X11 video input device. To enable this input device during configuration you need libxcb installed on your system. It will be automatically detected during configuration. This device allows one to capture a region of an X11 display. The filename passed as input has the syntax: \[hostname\]:display\_number.screen\_number\[+x\_offset,y\_offset\] hostname:display\_number.screen\_number specifies the X11 display name of the screen to grab from. hostname can be omitted, and defaults to "localhost". The environment variable `DISPLAY` contains the default display name. x\_offset and y\_offset specify the offsets of the grabbed area with respect to the top-left border of the X11 screen. They default to 0. Check the X11 documentation (e.g. `man X`) for more detailed information. Use the `xdpyinfo` program for getting basic information about the properties of your X11 display (e.g. grep for "name" or "dimensions"). For example to grab from :0.0 using `ffmpeg`: ffmpeg -f x11grab -framerate 25 -video\_size cif -i :0.0 out.mpg Grab at position `10,20`: ffmpeg -f x11grab -framerate 25 -video\_size cif -i :0.0+10,20 out.mpg #### 26.20.1 Options select\_region Specify whether to select the grabbing area graphically using the pointer. A value of `1` prompts the user to select the grabbing area graphically by clicking and dragging. A single click with no dragging will select the whole screen. A region with zero width or height will also select the whole screen. This option overwrites the video\_size, grab\_x, and grab\_y options. Default value is `0`. draw\_mouse Specify whether to draw the mouse pointer. A value of `0` specifies not to draw the pointer. Default value is `1`. follow\_mouse Make the grabbed area follow the mouse. The argument can be `centered` or a number of pixels PIXELS. When it is specified with "centered", the grabbing region follows the mouse pointer and keeps the pointer at the center of region; otherwise, the region follows only when the mouse pointer reaches within PIXELS (greater than zero) to the edge of region. For example: ffmpeg -f x11grab -follow\_mouse centered -framerate 25 -video\_size cif -i :0.0 out.mpg To follow only when the mouse pointer reaches within 100 pixels to edge: ffmpeg -f x11grab -follow\_mouse 100 -framerate 25 -video\_size cif -i :0.0 out.mpg framerate Set the grabbing frame rate. Default value is `ntsc`, corresponding to a frame rate of `30000/1001`. show\_region Show grabbed region on screen. If show\_region is specified with `1`, then the grabbing region will be indicated on screen. With this option, it is easy to know what is being grabbed if only a portion of the screen is grabbed. region\_border Set the region border thickness if \-show\_region 1 is used. Range is 1 to 128 and default is 3 (XCB-based x11grab only). For example: ffmpeg -f x11grab -show\_region 1 -framerate 25 -video\_size cif -i :0.0+10,20 out.mpg With follow\_mouse: ffmpeg -f x11grab -follow\_mouse centered -show\_region 1 -framerate 25 -video\_size cif -i :0.0 out.mpg window\_id Grab this window, instead of the whole screen. Default value is 0, which maps to the whole screen (root window). The id of a window can be found using the `xwininfo` program, possibly with options -tree and -root. If the window is later enlarged, the new area is not recorded. Video ends when the window is closed, unmapped (i.e., iconified) or shrunk beyond the video size (which defaults to the initial window size). This option disables options follow\_mouse and select\_region. video\_size Set the video frame size. Default is the full desktop or window. grab\_x grab\_y Set the grabbing region coordinates. They are expressed as offset from the top left corner of the X11 window and correspond to the x\_offset and y\_offset parameters in the device name. The default value for both options is 0. ## 27 Output Devices Output devices are configured elements in FFmpeg that can write multimedia data to an output device attached to your system. When you configure your FFmpeg build, all the supported output devices are enabled by default. You can list all available ones using the configure option "–list-outdevs". You can disable all the output devices using the configure option "–disable-outdevs", and selectively enable an output device using the option "–enable-outdev=OUTDEV", or you can disable a particular input device using the option "–disable-outdev=OUTDEV". The option "-devices" of the ff\* tools will display the list of enabled output devices. A description of the currently available output devices follows. ### 27.1 alsa ALSA (Advanced Linux Sound Architecture) output device. #### 27.1.1 Examples * Play a file on default ALSA device: ffmpeg -i INPUT -f alsa default * Play a file on soundcard 1, audio device 7: ffmpeg -i INPUT -f alsa hw:1,7 ### 27.2 AudioToolbox AudioToolbox output device. Allows native output to CoreAudio devices on OSX. The output filename can be empty (or `-`) to refer to the default system output device or a number that refers to the device index as shown using: `-list_devices true`. Alternatively, the audio input device can be chosen by index using the \-audio\_device\_index <INDEX> , overriding any device name or index given in the input filename. All available devices can be enumerated by using \-list\_devices true, listing all device names, UIDs and corresponding indices. #### 27.2.1 Options AudioToolbox supports the following options: \-audio\_device\_index <INDEX> Specify the audio device by its index. Overrides anything given in the output filename. #### 27.2.2 Examples * Print the list of supported devices and output a sine wave to the default device: $ ffmpeg -f lavfi -i sine=r=44100 -f audiotoolbox -list\_devices true - * Output a sine wave to the device with the index 2, overriding any output filename: $ ffmpeg -f lavfi -i sine=r=44100 -f audiotoolbox -audio\_device\_index 2 - ### 27.3 caca CACA output device. This output device allows one to show a video stream in CACA window. Only one CACA window is allowed per application, so you can have only one instance of this output device in an application. To enable this output device you need to configure FFmpeg with `--enable-libcaca`. libcaca is a graphics library that outputs text instead of pixels. For more information about libcaca, check: http://caca.zoy.org/wiki/libcaca #### 27.3.1 Options window\_title Set the CACA window title, if not specified default to the filename specified for the output device. window\_size Set the CACA window size, can be a string of the form widthxheight or a video size abbreviation. If not specified it defaults to the size of the input video. driver Set display driver. algorithm Set dithering algorithm. Dithering is necessary because the picture being rendered has usually far more colours than the available palette. The accepted values are listed with `-list_dither algorithms`. antialias Set antialias method. Antialiasing smoothens the rendered image and avoids the commonly seen staircase effect. The accepted values are listed with `-list_dither antialiases`. charset Set which characters are going to be used when rendering text. The accepted values are listed with `-list_dither charsets`. color Set color to be used when rendering text. The accepted values are listed with `-list_dither colors`. list\_drivers If set to true, print a list of available drivers and exit. list\_dither List available dither options related to the argument. The argument must be one of `algorithms`, `antialiases`, `charsets`, `colors`. #### 27.3.2 Examples * The following command shows the `ffmpeg` output is an CACA window, forcing its size to 80x25: ffmpeg -i INPUT -c:v rawvideo -pix\_fmt rgb24 -window\_size 80x25 -f caca - * Show the list of available drivers and exit: ffmpeg -i INPUT -pix\_fmt rgb24 -f caca -list\_drivers true - * Show the list of available dither colors and exit: ffmpeg -i INPUT -pix\_fmt rgb24 -f caca -list\_dither colors - ### 27.4 decklink The decklink output device provides playback capabilities for Blackmagic DeckLink devices. To enable this output device, you need the Blackmagic DeckLink SDK and you need to configure with the appropriate `--extra-cflags` and `--extra-ldflags`. On Windows, you need to run the IDL files through `widl`. DeckLink is very picky about the formats it supports. Pixel format is always uyvy422, framerate, field order and video size must be determined for your device with `-list_formats 1`. Audio sample rate is always 48 kHz. #### 27.4.1 Options list\_devices If set to true, print a list of devices and exit. Defaults to false. This option is deprecated, please use the `-sinks` option of ffmpeg to list the available output devices. list\_formats If set to true, print a list of supported formats and exit. Defaults to false. preroll Amount of time to preroll video in seconds. Defaults to 0.5. duplex\_mode Sets the decklink device duplex/profile mode. Must be ‘unset’, ‘half’, ‘full’, ‘one\_sub\_device\_full’, ‘one\_sub\_device\_half’, ‘two\_sub\_device\_full’, ‘four\_sub\_device\_half’ Defaults to ‘unset’. Note: DeckLink SDK 11.0 have replaced the duplex property by a profile property. For the DeckLink Duo 2 and DeckLink Quad 2, a profile is shared between any 2 sub-devices that utilize the same connectors. For the DeckLink 8K Pro, a profile is shared between all 4 sub-devices. So DeckLink 8K Pro support four profiles. Valid profile modes for DeckLink 8K Pro(with DeckLink SDK >= 11.0): ‘one\_sub\_device\_full’, ‘one\_sub\_device\_half’, ‘two\_sub\_device\_full’, ‘four\_sub\_device\_half’ Valid profile modes for DeckLink Quad 2 and DeckLink Duo 2: ‘half’, ‘full’ timing\_offset Sets the genlock timing pixel offset on the used output. Defaults to ‘unset’. link Sets the SDI video link configuration on the used output. Must be ‘unset’, ‘single’ link SDI, ‘dual’ link SDI or ‘quad’ link SDI. Defaults to ‘unset’. sqd Enable Square Division Quad Split mode for Quad-link SDI output. Must be ‘unset’, ‘true’ or ‘false’. Defaults to unset. level\_a Enable SMPTE Level A mode on the used output. Must be ‘unset’, ‘true’ or ‘false’. Defaults to unset. vanc\_queue\_size Sets maximum output buffer size in bytes for VANC data. If the buffering reaches this value, outgoing VANC data will be dropped. Defaults to ‘1048576’. #### 27.4.2 Examples * List output devices: ffmpeg -sinks decklink * List supported formats: ffmpeg -i test.avi -f decklink -list\_formats 1 'DeckLink Mini Monitor' * Play video clip: ffmpeg -i test.avi -f decklink -pix\_fmt uyvy422 'DeckLink Mini Monitor' * Play video clip with non-standard framerate or video size: ffmpeg -i test.avi -f decklink -pix\_fmt uyvy422 -s 720x486 -r 24000/1001 'DeckLink Mini Monitor' ### 27.5 fbdev Linux framebuffer output device. The Linux framebuffer is a graphic hardware-independent abstraction layer to show graphics on a computer monitor, typically on the console. It is accessed through a file device node, usually /dev/fb0. For more detailed information read the file Documentation/fb/framebuffer.txt included in the Linux source tree. #### 27.5.1 Options xoffset yoffset Set x/y coordinate of top left corner. Default is 0. #### 27.5.2 Examples Play a file on framebuffer device /dev/fb0. Required pixel format depends on current framebuffer settings. ffmpeg -re -i INPUT -c:v rawvideo -pix\_fmt bgra -f fbdev /dev/fb0 See also http://linux-fbdev.sourceforge.net/, and fbset(1). ### 27.6 oss OSS (Open Sound System) output device. ### 27.7 pulse PulseAudio output device. To enable this output device you need to configure FFmpeg with `--enable-libpulse`. More information about PulseAudio can be found on http://www.pulseaudio.org #### 27.7.1 Options server Connect to a specific PulseAudio server, specified by an IP address. Default server is used when not provided. name Specify the application name PulseAudio will use when showing active clients, by default it is the `LIBAVFORMAT_IDENT` string. stream\_name Specify the stream name PulseAudio will use when showing active streams, by default it is set to the specified output name. device Specify the device to use. Default device is used when not provided. List of output devices can be obtained with command `pactl list sinks`. buffer\_size buffer\_duration Control the size and duration of the PulseAudio buffer. A small buffer gives more control, but requires more frequent updates. buffer\_size specifies size in bytes while buffer\_duration specifies duration in milliseconds. When both options are provided then the highest value is used (duration is recalculated to bytes using stream parameters). If they are set to 0 (which is default), the device will use the default PulseAudio duration value. By default PulseAudio set buffer duration to around 2 seconds. prebuf Specify pre-buffering size in bytes. The server does not start with playback before at least prebuf bytes are available in the buffer. By default this option is initialized to the same value as buffer\_size or buffer\_duration (whichever is bigger). minreq Specify minimum request size in bytes. The server does not request less than minreq bytes from the client, instead waits until the buffer is free enough to request more bytes at once. It is recommended to not set this option, which will initialize this to a value that is deemed sensible by the server. #### 27.7.2 Examples Play a file on default device on default server: ffmpeg -i INPUT -f pulse "stream name" ### 27.8 sndio sndio audio output device. ### 27.9 v4l2 Video4Linux2 output device. ### 27.10 xv XV (XVideo) output device. This output device allows one to show a video stream in a X Window System window. #### 27.10.1 Options display\_name Specify the hardware display name, which determines the display and communications domain to be used. The display name or DISPLAY environment variable can be a string in the format hostname\[:number\[.screen\_number\]\]. hostname specifies the name of the host machine on which the display is physically attached. number specifies the number of the display server on that host machine. screen\_number specifies the screen to be used on that server. If unspecified, it defaults to the value of the DISPLAY environment variable. For example, `dual-headed:0.1` would specify screen 1 of display 0 on the machine named “dual-headed”. Check the X11 specification for more detailed information about the display name format. window\_id When set to non-zero value then device doesn’t create new window, but uses existing one with provided window\_id. By default this options is set to zero and device creates its own window. window\_size Set the created window size, can be a string of the form widthxheight or a video size abbreviation. If not specified it defaults to the size of the input video. Ignored when window\_id is set. window\_x window\_y Set the X and Y window offsets for the created window. They are both set to 0 by default. The values may be ignored by the window manager. Ignored when window\_id is set. window\_title Set the window title, if not specified default to the filename specified for the output device. Ignored when window\_id is set. For more information about XVideo see http://www.x.org/. #### 27.10.2 Examples * Decode, display and encode video input with `ffmpeg` at the same time: ffmpeg -i INPUT OUTPUT -f xv display * Decode and display the input video to multiple X11 windows: ffmpeg -i INPUT -f xv normal -vf negate -f xv negated ## 28 Resampler Options The audio resampler supports the following named options. Options may be set by specifying -option value in the FFmpeg tools, option\=value for the aresample filter, by setting the value explicitly in the `SwrContext` options or using the libavutil/opt.h API for programmatic use. uchl, used\_chlayout Set used input channel layout. Default is unset. This option is only used for special remapping. isr, in\_sample\_rate Set the input sample rate. Default value is 0. osr, out\_sample\_rate Set the output sample rate. Default value is 0. isf, in\_sample\_fmt Specify the input sample format. It is set by default to `none`. osf, out\_sample\_fmt Specify the output sample format. It is set by default to `none`. tsf, internal\_sample\_fmt Set the internal sample format. Default value is `none`. This will automatically be chosen when it is not explicitly set. ichl, in\_chlayout ochl, out\_chlayout Set the input/output channel layout. See (ffmpeg-utils)the Channel Layout section in the ffmpeg-utils(1) manual for the required syntax. clev, center\_mix\_level Set the center mix level. It is a value expressed in deciBel, and must be in the interval \[-32,32\]. slev, surround\_mix\_level Set the surround mix level. It is a value expressed in deciBel, and must be in the interval \[-32,32\]. lfe\_mix\_level Set LFE mix into non LFE level. It is used when there is a LFE input but no LFE output. It is a value expressed in deciBel, and must be in the interval \[-32,32\]. rmvol, rematrix\_volume Set rematrix volume. Default value is 1.0. rematrix\_maxval Set maximum output value for rematrixing. This can be used to prevent clipping vs. preventing volume reduction. A value of 1.0 prevents clipping. flags, swr\_flags Set flags used by the converter. Default value is 0. It supports the following individual flags: res force resampling, this flag forces resampling to be used even when the input and output sample rates match. dither\_scale Set the dither scale. Default value is 1. dither\_method Set dither method. Default value is 0. Supported values: ‘rectangular’ select rectangular dither ‘triangular’ select triangular dither ‘triangular\_hp’ select triangular dither with high pass ‘lipshitz’ select Lipshitz noise shaping dither. ‘shibata’ select Shibata noise shaping dither. ‘low\_shibata’ select low Shibata noise shaping dither. ‘high\_shibata’ select high Shibata noise shaping dither. ‘f\_weighted’ select f-weighted noise shaping dither ‘modified\_e\_weighted’ select modified-e-weighted noise shaping dither ‘improved\_e\_weighted’ select improved-e-weighted noise shaping dither resampler Set resampling engine. Default value is swr. Supported values: ‘swr’ select the native SW Resampler; filter options precision and cheby are not applicable in this case. ‘soxr’ select the SoX Resampler (where available); compensation, and filter options filter\_size, phase\_shift, exact\_rational, filter\_type & kaiser\_beta, are not applicable in this case. filter\_size For swr only, set resampling filter size, default value is 32. phase\_shift For swr only, set resampling phase shift, default value is 10, and must be in the interval \[0,30\]. linear\_interp Use linear interpolation when enabled (the default). Disable it if you want to preserve speed instead of quality when exact\_rational fails. exact\_rational For swr only, when enabled, try to use exact phase\_count based on input and output sample rate. However, if it is larger than `1 << phase_shift`, the phase\_count will be `1 << phase_shift` as fallback. Default is enabled. cutoff Set cutoff frequency (swr: 6dB point; soxr: 0dB point) ratio; must be a float value between 0 and 1. Default value is 0.97 with swr, and 0.91 with soxr (which, with a sample-rate of 44100, preserves the entire audio band to 20kHz). precision For soxr only, the precision in bits to which the resampled signal will be calculated. The default value of 20 (which, with suitable dithering, is appropriate for a destination bit-depth of 16) gives SoX’s ’High Quality’; a value of 28 gives SoX’s ’Very High Quality’. cheby For soxr only, selects passband rolloff none (Chebyshev) & higher-precision approximation for ’irrational’ ratios. Default value is 0. async For swr only, simple 1 parameter audio sync to timestamps using stretching, squeezing, filling and trimming. Setting this to 1 will enable filling and trimming, larger values represent the maximum amount in samples that the data may be stretched or squeezed for each second. Default value is 0, thus no compensation is applied to make the samples match the audio timestamps. first\_pts For swr only, assume the first pts should be this value. The time unit is 1 / sample rate. This allows for padding/trimming at the start of stream. By default, no assumption is made about the first frame’s expected pts, so no padding or trimming is done. For example, this could be set to 0 to pad the beginning with silence if an audio stream starts after the video stream or to trim any samples with a negative pts due to encoder delay. min\_comp For swr only, set the minimum difference between timestamps and audio data (in seconds) to trigger stretching/squeezing/filling or trimming of the data to make it match the timestamps. The default is that stretching/squeezing/filling and trimming is disabled (min\_comp = `FLT_MAX`). min\_hard\_comp For swr only, set the minimum difference between timestamps and audio data (in seconds) to trigger adding/dropping samples to make it match the timestamps. This option effectively is a threshold to select between hard (trim/fill) and soft (squeeze/stretch) compensation. Note that all compensation is by default disabled through min\_comp. The default is 0.1. comp\_duration For swr only, set duration (in seconds) over which data is stretched/squeezed to make it match the timestamps. Must be a non-negative double float value, default value is 1.0. max\_soft\_comp For swr only, set maximum factor by which data is stretched/squeezed to make it match the timestamps. Must be a non-negative double float value, default value is 0. matrix\_encoding Select matrixed stereo encoding. It accepts the following values: ‘none’ select none ‘dolby’ select Dolby ‘dplii’ select Dolby Pro Logic II Default value is `none`. filter\_type For swr only, select resampling filter type. This only affects resampling operations. It accepts the following values: ‘cubic’ select cubic ‘blackman\_nuttall’ select Blackman Nuttall windowed sinc ‘kaiser’ select Kaiser windowed sinc kaiser\_beta For swr only, set Kaiser window beta value. Must be a double float value in the interval \[2,16\], default value is 9. output\_sample\_bits For swr only, set number of used output sample bits for dithering. Must be an integer in the interval \[0,64\], default value is 0, which means it’s not used. ## 29 Scaler Options The video scaler supports the following named options. Options may be set by specifying -option value in the FFmpeg tools, with a few API-only exceptions noted below. For programmatic use, they can be set explicitly in the `SwsContext` options or through the libavutil/opt.h API. sws\_flags Set the scaler flags. This is also used to set the scaling algorithm. Only a single algorithm should be selected. Default value is ‘bicubic’. It accepts the following values: ‘fast\_bilinear’ Select fast bilinear scaling algorithm. ‘bilinear’ Select bilinear scaling algorithm. ‘bicubic’ Select bicubic scaling algorithm. ‘experimental’ Select experimental scaling algorithm. ‘neighbor’ Select nearest neighbor rescaling algorithm. ‘area’ Select averaging area rescaling algorithm. ‘bicublin’ Select bicubic scaling algorithm for the luma component, bilinear for chroma components. ‘gauss’ Select Gaussian rescaling algorithm. ‘sinc’ Select sinc rescaling algorithm. ‘lanczos’ Select Lanczos rescaling algorithm. The default width (alpha) is 3 and can be changed by setting `param0`. ‘spline’ Select natural bicubic spline rescaling algorithm. ‘print\_info’ Enable printing/debug logging. ‘accurate\_rnd’ Enable accurate rounding. ‘full\_chroma\_int’ Enable full chroma interpolation. ‘full\_chroma\_inp’ Select full chroma input. ‘bitexact’ Enable bitexact output. srcw (API only) Set source width. srch (API only) Set source height. dstw (API only) Set destination width. dsth (API only) Set destination height. src\_format (API only) Set source pixel format (must be expressed as an integer). dst\_format (API only) Set destination pixel format (must be expressed as an integer). src\_range (boolean) If value is set to `1`, indicates source is full range. Default value is `0`, which indicates source is limited range. dst\_range (boolean) If value is set to `1`, enable full range for destination. Default value is `0`, which enables limited range. param0, param1 Set scaling algorithm parameters. The specified values are specific of some scaling algorithms and ignored by others. The specified values are floating point number values. sws\_dither Set the dithering algorithm. Accepts one of the following values. Default value is ‘auto’. ‘auto’ automatic choice ‘none’ no dithering ‘bayer’ bayer dither ‘ed’ error diffusion dither ‘a\_dither’ arithmetic dither, based using addition ‘x\_dither’ arithmetic dither, based using xor (more random/less apparent patterning that a\_dither). alphablend Set the alpha blending to use when the input has alpha but the output does not. Default value is ‘none’. ‘uniform\_color’ Blend onto a uniform background color ‘checkerboard’ Blend onto a checkerboard ‘none’ No blending ## 30 Filtering Introduction Filtering in FFmpeg is enabled through the libavfilter library. In libavfilter, a filter can have multiple inputs and multiple outputs. To illustrate the sorts of things that are possible, we consider the following filtergraph. \[main\] input --> split ---------------------> overlay --> output | ^ |\[tmp\] \[flip\]| +-----> crop --> vflip -------+ This filtergraph splits the input stream in two streams, then sends one stream through the crop filter and the vflip filter, before merging it back with the other stream by overlaying it on top. You can use the following command to achieve this: ffmpeg -i INPUT -vf "split \[main\]\[tmp\]; \[tmp\] crop=iw:ih/2:0:0, vflip \[flip\]; \[main\]\[flip\] overlay=0:H/2" OUTPUT The result will be that the top half of the video is mirrored onto the bottom half of the output video. Filters in the same linear chain are separated by commas, and distinct linear chains of filters are separated by semicolons. In our example, crop,vflip are in one linear chain, split and overlay are separately in another. The points where the linear chains join are labelled by names enclosed in square brackets. In the example, the split filter generates two outputs that are associated to the labels \[main\] and \[tmp\]. The stream sent to the second output of split, labelled as \[tmp\], is processed through the crop filter, which crops away the lower half part of the video, and then vertically flipped. The overlay filter takes in input the first unchanged output of the split filter (which was labelled as \[main\]), and overlay on its lower half the output generated by the crop,vflip filterchain. Some filters take in input a list of parameters: they are specified after the filter name and an equal sign, and are separated from each other by a colon. There exist so-called source filters that do not have an audio/video input, and sink filters that will not have audio/video output. ## 31 graph2dot The graph2dot program included in the FFmpeg tools directory can be used to parse a filtergraph description and issue a corresponding textual representation in the dot language. Invoke the command: graph2dot -h to see how to use graph2dot. You can then pass the dot description to the dot program (from the graphviz suite of programs) and obtain a graphical representation of the filtergraph. For example the sequence of commands: echo GRAPH\_DESCRIPTION | \\ tools/graph2dot -o graph.tmp && \\ dot -Tpng graph.tmp -o graph.png && \\ display graph.png can be used to create and display an image representing the graph described by the GRAPH\_DESCRIPTION string. Note that this string must be a complete self-contained graph, with its inputs and outputs explicitly defined. For example if your command line is of the form: ffmpeg -i infile -vf scale=640:360 outfile your GRAPH\_DESCRIPTION string will need to be of the form: nullsrc,scale=640:360,nullsink you may also need to set the nullsrc parameters and add a format filter in order to simulate a specific input file. ## 32 Filtergraph description A filtergraph is a directed graph of connected filters. It can contain cycles, and there can be multiple links between a pair of filters. Each link has one input pad on one side connecting it to one filter from which it takes its input, and one output pad on the other side connecting it to one filter accepting its output. Each filter in a filtergraph is an instance of a filter class registered in the application, which defines the features and the number of input and output pads of the filter. A filter with no input pads is called a "source", and a filter with no output pads is called a "sink". ### 32.1 Filtergraph syntax A filtergraph has a textual representation, which is recognized by the \-filter/\-vf/\-af and \-filter\_complex options in `ffmpeg` and \-vf/\-af in `ffplay`, and by the `avfilter_graph_parse_ptr()` function defined in libavfilter/avfilter.h. A filterchain consists of a sequence of connected filters, each one connected to the previous one in the sequence. A filterchain is represented by a list of ","-separated filter descriptions. A filtergraph consists of a sequence of filterchains. A sequence of filterchains is represented by a list of ";"-separated filterchain descriptions. A filter is represented by a string of the form: \[in\_link\_1\]...\[in\_link\_N\]filter\_name@id\=arguments\[out\_link\_1\]...\[out\_link\_M\] filter\_name is the name of the filter class of which the described filter is an instance of, and has to be the name of one of the filter classes registered in the program optionally followed by "@id". The name of the filter class is optionally followed by a string "=arguments". arguments is a string which contains the parameters used to initialize the filter instance. It may have one of two forms: * A ’:’-separated list of key=value pairs. * A ’:’-separated list of value. In this case, the keys are assumed to be the option names in the order they are declared. E.g. the `fade` filter declares three options in this order – type, start\_frame and nb\_frames. Then the parameter list in:0:30 means that the value in is assigned to the option type, 0 to start\_frame and 30 to nb\_frames. * A ’:’-separated list of mixed direct value and long key=value pairs. The direct value must precede the key=value pairs, and follow the same constraints order of the previous point. The following key=value pairs can be set in any preferred order. If the option value itself is a list of items (e.g. the `format` filter takes a list of pixel formats), the items in the list are usually separated by ‘|’. The list of arguments can be quoted using the character ‘'’ as initial and ending mark, and the character ‘\\’ for escaping the characters within the quoted text; otherwise the argument string is considered terminated when the next special character (belonging to the set ‘\[\]=;,’) is encountered. A special syntax implemented in the `ffmpeg` CLI tool allows loading option values from files. This is done be prepending a slash ’/’ to the option name, then the supplied value is interpreted as a path from which the actual value is loaded. E.g. ffmpeg -i <INPUT> -vf drawtext=/text=/tmp/some\_text <OUTPUT> will load the text to be drawn from /tmp/some\_text. API users wishing to implement a similar feature should use the `avfilter_graph_segment_*()` functions together with custom IO code. The name and arguments of the filter are optionally preceded and followed by a list of link labels. A link label allows one to name a link and associate it to a filter output or input pad. The preceding labels in\_link\_1 ... in\_link\_N, are associated to the filter input pads, the following labels out\_link\_1 ... out\_link\_M, are associated to the output pads. When two link labels with the same name are found in the filtergraph, a link between the corresponding input and output pad is created. If an output pad is not labelled, it is linked by default to the first unlabelled input pad of the next filter in the filterchain. For example in the filterchain nullsrc, split\[L1\], \[L2\]overlay, nullsink the split filter instance has two output pads, and the overlay filter instance two input pads. The first output pad of split is labelled "L1", the first input pad of overlay is labelled "L2", and the second output pad of split is linked to the second input pad of overlay, which are both unlabelled. In a filter description, if the input label of the first filter is not specified, "in" is assumed; if the output label of the last filter is not specified, "out" is assumed. In a complete filterchain all the unlabelled filter input and output pads must be connected. A filtergraph is considered valid if all the filter input and output pads of all the filterchains are connected. Leading and trailing whitespaces (space, tabs, or line feeds) separating tokens in the filtergraph specification are ignored. This means that the filtergraph can be expressed using empty lines and spaces to improve redability. For example, the filtergraph: testsrc,split\[L1\],hflip\[L2\];\[L1\]\[L2\] hstack can be represented as: testsrc, split \[L1\], hflip \[L2\]; \[L1\]\[L2\] hstack Libavfilter will automatically insert scale filters where format conversion is required. It is possible to specify swscale flags for those automatically inserted scalers by prepending `sws_flags=flags;` to the filtergraph description. Here is a BNF description of the filtergraph syntax: NAME ::= sequence of alphanumeric characters and '\_' FILTER\_NAME ::= NAME\["@"NAME\] LINKLABEL ::= "\[" NAME "\]" LINKLABELS ::= LINKLABEL \[LINKLABELS\] FILTER\_ARGUMENTS ::= sequence of chars (possibly quoted) FILTER ::= \[LINKLABELS\] FILTER\_NAME \["=" FILTER\_ARGUMENTS\] \[LINKLABELS\] FILTERCHAIN ::= FILTER \[,FILTERCHAIN\] FILTERGRAPH ::= \[sws\_flags=flags;\] FILTERCHAIN \[;FILTERGRAPH\] ### 32.2 Notes on filtergraph escaping Filtergraph description composition entails several levels of escaping. See (ffmpeg-utils)the "Quoting and escaping" section in the ffmpeg-utils(1) manual for more information about the employed escaping procedure. A first level escaping affects the content of each filter option value, which may contain the special character `:` used to separate values, or one of the escaping characters `\'`. A second level escaping affects the whole filter description, which may contain the escaping characters `\'` or the special characters `[],;` used by the filtergraph description. Finally, when you specify a filtergraph on a shell commandline, you need to perform a third level escaping for the shell special characters contained within it. For example, consider the following string to be embedded in the drawtext filter description text value: this is a 'string': may contain one, or more, special characters This string contains the `'` special escaping character, and the `:` special character, so it needs to be escaped in this way: text=this is a \\'string\\'\\: may contain one, or more, special characters A second level of escaping is required when embedding the filter description in a filtergraph description, in order to escape all the filtergraph special characters. Thus the example above becomes: drawtext=text=this is a \\\\\\'string\\\\\\'\\\\: may contain one\\, or more\\, special characters (note that in addition to the `\'` escaping special characters, also `,` needs to be escaped). Finally an additional level of escaping is needed when writing the filtergraph description in a shell command, which depends on the escaping rules of the adopted shell. For example, assuming that `\` is special and needs to be escaped with another `\`, the previous string will finally result in: \-vf "drawtext=text=this is a \\\\\\\\\\\\'string\\\\\\\\\\\\'\\\\\\\\: may contain one\\\\, or more\\\\, special characters" In order to avoid cumbersome escaping when using a commandline tool accepting a filter specification as input, it is advisable to avoid direct inclusion of the filter or options specification in the shell. For example, in case of the drawtext filter, you might prefer to use the textfile option in place of text to specify the text to render. ## 33 Timeline editing Some filters support a generic enable option. For the filters supporting timeline editing, this option can be set to an expression which is evaluated before sending a frame to the filter. If the evaluation is non-zero, the filter will be enabled, otherwise the frame will be sent unchanged to the next filter in the filtergraph. The expression accepts the following values: ‘t’ timestamp expressed in seconds, NAN if the input timestamp is unknown ‘n’ sequential number of the input frame, starting from 0 ‘pos’ the position in the file of the input frame, NAN if unknown; deprecated, do not use ‘w’ ‘h’ width and height of the input frame if video Additionally, these filters support an enable command that can be used to re-define the expression. Like any other filtering option, the enable option follows the same rules. For example, to enable a blur filter (smartblur) from 10 seconds to 3 minutes, and a curves filter starting at 3 seconds: smartblur = enable='between(t,10,3\*60)', curves = enable='gte(t,3)' : preset=cross\_process See `ffmpeg -filters` to view which filters have timeline support. ## 34 Changing options at runtime with a command Some options can be changed during the operation of the filter using a command. These options are marked ’T’ on the output of `ffmpeg` \-h filter=<name of filter>. The name of the command is the name of the option and the argument is the new value. ## 35 Options for filters with several inputs (framesync) Some filters with several inputs support a common set of options. These options can only be set by name, not with the short notation. eof\_action The action to take when EOF is encountered on the secondary input; it accepts one of the following values: repeat Repeat the last frame (the default). endall End both streams. pass Pass the main input through. shortest If set to 1, force the output to terminate when the shortest input terminates. Default value is 0. repeatlast If set to 1, force the filter to extend the last frame of secondary streams until the end of the primary stream. A value of 0 disables this behavior. Default value is 1. ts\_sync\_mode How strictly to sync streams based on secondary input timestamps; it accepts one of the following values: default Frame from secondary input with the nearest lower or equal timestamp to the primary input frame. nearest Frame from secondary input with the absolute nearest timestamp to the primary input frame. ## 36 Audio Filters When you configure your FFmpeg build, you can disable any of the existing filters using `--disable-filters`. The configure output will show the audio filters included in your build. Below is a description of the currently available audio filters. ### 36.1 aap Apply Affine Projection algorithm to the first audio stream using the second audio stream. This adaptive filter is used to estimate unknown audio based on multiple input audio samples. Affine projection algorithm can make trade-offs between computation complexity with convergence speed. A description of the accepted options follows. order Set the filter order. projection Set the projection order. mu Set the filter mu. delta Set the coefficient to initialize internal covariance matrix. out\_mode Set the filter output samples. It accepts the following values: i Pass the 1st input. d Pass the 2nd input. o Pass difference between desired, 2nd input and error signal estimate. n Pass difference between input, 1st input and error signal estimate. e Pass error signal estimated samples. Default value is o. precision Set which precision to use when processing samples. auto Auto pick internal sample format depending on other filters. float Always use single-floating point precision sample format. double Always use double-floating point precision sample format. ### 36.2 acompressor A compressor is mainly used to reduce the dynamic range of a signal. Especially modern music is mostly compressed at a high ratio to improve the overall loudness. It’s done to get the highest attention of a listener, "fatten" the sound and bring more "power" to the track. If a signal is compressed too much it may sound dull or "dead" afterwards or it may start to "pump" (which could be a powerful effect but can also destroy a track completely). The right compression is the key to reach a professional sound and is the high art of mixing and mastering. Because of its complex settings it may take a long time to get the right feeling for this kind of effect. Compression is done by detecting the volume above a chosen level `threshold` and dividing it by the factor set with `ratio`. So if you set the threshold to -12dB and your signal reaches -6dB a ratio of 2:1 will result in a signal at -9dB. Because an exact manipulation of the signal would cause distortion of the waveform the reduction can be levelled over the time. This is done by setting "Attack" and "Release". `attack` determines how long the signal has to rise above the threshold before any reduction will occur and `release` sets the time the signal has to fall below the threshold to reduce the reduction again. Shorter signals than the chosen attack time will be left untouched. The overall reduction of the signal can be made up afterwards with the `makeup` setting. So compressing the peaks of a signal about 6dB and raising the makeup to this level results in a signal twice as loud than the source. To gain a softer entry in the compression the `knee` flattens the hard edge at the threshold in the range of the chosen decibels. The filter accepts the following options: level\_in Set input gain. Default is 1. Range is between 0.015625 and 64. mode Set mode of compressor operation. Can be `upward` or `downward`. Default is `downward`. threshold If a signal of stream rises above this level it will affect the gain reduction. By default it is 0.125. Range is between 0.00097563 and 1. ratio Set a ratio by which the signal is reduced. 1:2 means that if the level rose 4dB above the threshold, it will be only 2dB above after the reduction. Default is 2. Range is between 1 and 20. attack Amount of milliseconds the signal has to rise above the threshold before gain reduction starts. Default is 20. Range is between 0.01 and 2000. release Amount of milliseconds the signal has to fall below the threshold before reduction is decreased again. Default is 250. Range is between 0.01 and 9000. makeup Set the amount by how much signal will be amplified after processing. Default is 1. Range is from 1 to 64. knee Curve the sharp knee around the threshold to enter gain reduction more softly. Default is 2.82843. Range is between 1 and 8. link Choose if the `average` level between all channels of input stream or the louder(`maximum`) channel of input stream affects the reduction. Default is `average`. detection Should the exact signal be taken in case of `peak` or an RMS one in case of `rms`. Default is `rms` which is mostly smoother. mix How much to use compressed signal in output. Default is 1. Range is between 0 and 1. #### 36.2.1 Commands This filter supports the all above options as commands. ### 36.3 acontrast Simple audio dynamic range compression/expansion filter. The filter accepts the following options: contrast Set contrast. Default is 33. Allowed range is between 0 and 100. ### 36.4 acopy Copy the input audio source unchanged to the output. This is mainly useful for testing purposes. ### 36.5 acrossfade Apply cross fade from one input audio stream to another input audio stream. The cross fade is applied for specified duration near the end of first stream. The filter accepts the following options: nb\_samples, ns Specify the number of samples for which the cross fade effect has to last. At the end of the cross fade effect the first input audio will be completely silent. Default is 44100. duration, d Specify the duration of the cross fade effect. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. By default the duration is determined by nb\_samples. If set this option is used instead of nb\_samples. overlap, o Should first stream end overlap with second stream start. Default is enabled. curve1 Set curve for cross fade transition for first stream. curve2 Set curve for cross fade transition for second stream. For description of available curve types see afade filter description. #### 36.5.1 Examples * Cross fade from one input to another: ffmpeg -i first.flac -i second.flac -filter\_complex acrossfade=d=10:c1=exp:c2=exp output.flac * Cross fade from one input to another but without overlapping: ffmpeg -i first.flac -i second.flac -filter\_complex acrossfade=d=10:o=0:c1=exp:c2=exp output.flac ### 36.6 acrossover Split audio stream into several bands. This filter splits audio stream into two or more frequency ranges. Summing all streams back will give flat output. The filter accepts the following options: split Set split frequencies. Those must be positive and increasing. order Set filter order for each band split. This controls filter roll-off or steepness of filter transfer function. Available values are: ‘2nd’ 12 dB per octave. ‘4th’ 24 dB per octave. ‘6th’ 36 dB per octave. ‘8th’ 48 dB per octave. ‘10th’ 60 dB per octave. ‘12th’ 72 dB per octave. ‘14th’ 84 dB per octave. ‘16th’ 96 dB per octave. ‘18th’ 108 dB per octave. ‘20th’ 120 dB per octave. Default is 4th. level Set input gain level. Allowed range is from 0 to 1. Default value is 1. gains Set output gain for each band. Default value is 1 for all bands. precision Set which precision to use when processing samples. auto Auto pick internal sample format depending on other filters. float Always use single-floating point precision sample format. double Always use double-floating point precision sample format. Default value is `auto`. #### 36.6.1 Examples * Split input audio stream into two bands (low and high) with split frequency of 1500 Hz, each band will be in separate stream: ffmpeg -i in.flac -filter\_complex 'acrossover=split=1500\[LOW\]\[HIGH\]' -map '\[LOW\]' low.wav -map '\[HIGH\]' high.wav * Same as above, but with higher filter order: ffmpeg -i in.flac -filter\_complex 'acrossover=split=1500:order=8th\[LOW\]\[HIGH\]' -map '\[LOW\]' low.wav -map '\[HIGH\]' high.wav * Same as above, but also with additional middle band (frequencies between 1500 and 8000): ffmpeg -i in.flac -filter\_complex 'acrossover=split=1500 8000:order=8th\[LOW\]\[MID\]\[HIGH\]' -map '\[LOW\]' low.wav -map '\[MID\]' mid.wav -map '\[HIGH\]' high.wav ### 36.7 acrusher Reduce audio bit resolution. This filter is bit crusher with enhanced functionality. A bit crusher is used to audibly reduce number of bits an audio signal is sampled with. This doesn’t change the bit depth at all, it just produces the effect. Material reduced in bit depth sounds more harsh and "digital". This filter is able to even round to continuous values instead of discrete bit depths. Additionally it has a D/C offset which results in different crushing of the lower and the upper half of the signal. An Anti-Aliasing setting is able to produce "softer" crushing sounds. Another feature of this filter is the logarithmic mode. This setting switches from linear distances between bits to logarithmic ones. The result is a much more "natural" sounding crusher which doesn’t gate low signals for example. The human ear has a logarithmic perception, so this kind of crushing is much more pleasant. Logarithmic crushing is also able to get anti-aliased. The filter accepts the following options: level\_in Set level in. level\_out Set level out. bits Set bit reduction. mix Set mixing amount. mode Can be linear: `lin` or logarithmic: `log`. dc Set DC. aa Set anti-aliasing. samples Set sample reduction. lfo Enable LFO. By default disabled. lforange Set LFO range. lforate Set LFO rate. #### 36.7.1 Commands This filter supports the all above options as commands. ### 36.8 acue Delay audio filtering until a given wallclock timestamp. See the cue filter. ### 36.9 adeclick Remove impulsive noise from input audio. Samples detected as impulsive noise are replaced by interpolated samples using autoregressive modelling. window, w Set window size, in milliseconds. Allowed range is from `10` to `100`. Default value is `55` milliseconds. This sets size of window which will be processed at once. overlap, o Set window overlap, in percentage of window size. Allowed range is from `50` to `95`. Default value is `75` percent. Setting this to a very high value increases impulsive noise removal but makes whole process much slower. arorder, a Set autoregression order, in percentage of window size. Allowed range is from `0` to `25`. Default value is `2` percent. This option also controls quality of interpolated samples using neighbour good samples. threshold, t Set threshold value. Allowed range is from `1` to `100`. Default value is `2`. This controls the strength of impulsive noise which is going to be removed. The lower value, the more samples will be detected as impulsive noise. burst, b Set burst fusion, in percentage of window size. Allowed range is `0` to `10`. Default value is `2`. If any two samples detected as noise are spaced less than this value then any sample between those two samples will be also detected as noise. method, m Set overlap method. It accepts the following values: add, a Select overlap-add method. Even not interpolated samples are slightly changed with this method. save, s Select overlap-save method. Not interpolated samples remain unchanged. Default value is `a`. ### 36.10 adeclip Remove clipped samples from input audio. Samples detected as clipped are replaced by interpolated samples using autoregressive modelling. window, w Set window size, in milliseconds. Allowed range is from `10` to `100`. Default value is `55` milliseconds. This sets size of window which will be processed at once. overlap, o Set window overlap, in percentage of window size. Allowed range is from `50` to `95`. Default value is `75` percent. arorder, a Set autoregression order, in percentage of window size. Allowed range is from `0` to `25`. Default value is `8` percent. This option also controls quality of interpolated samples using neighbour good samples. threshold, t Set threshold value. Allowed range is from `1` to `100`. Default value is `10`. Higher values make clip detection less aggressive. hsize, n Set size of histogram used to detect clips. Allowed range is from `100` to `9999`. Default value is `1000`. Higher values make clip detection less aggressive. method, m Set overlap method. It accepts the following values: add, a Select overlap-add method. Even not interpolated samples are slightly changed with this method. save, s Select overlap-save method. Not interpolated samples remain unchanged. Default value is `a`. ### 36.11 adecorrelate Apply decorrelation to input audio stream. The filter accepts the following options: stages Set decorrelation stages of filtering. Allowed range is from 1 to 16. Default value is 6. seed Set random seed used for setting delay in samples across channels. ### 36.12 adelay Delay one or more audio channels. Samples in delayed channel are filled with silence. The filter accepts the following option: delays Set list of delays in milliseconds for each channel separated by ’|’. Unused delays will be silently ignored. If number of given delays is smaller than number of channels all remaining channels will not be delayed. If you want to delay exact number of samples, append ’S’ to number. If you want instead to delay in seconds, append ’s’ to number. all Use last set delay for all remaining channels. By default is disabled. This option if enabled changes how option `delays` is interpreted. #### 36.12.1 Examples * Delay first channel by 1.5 seconds, the third channel by 0.5 seconds and leave the second channel (and any other channels that may be present) unchanged. adelay=1500|0|500 * Delay second channel by 500 samples, the third channel by 700 samples and leave the first channel (and any other channels that may be present) unchanged. adelay=0|500S|700S * Delay all channels by same number of samples: adelay=delays=64S:all=1 ### 36.13 adenorm Remedy denormals in audio by adding extremely low-level noise. This filter shall be placed before any filter that can produce denormals. A description of the accepted parameters follows. level Set level of added noise in dB. Default is `-351`. Allowed range is from -451 to -90. type Set type of added noise. dc Add DC signal. ac Add AC signal. square Add square signal. pulse Add pulse signal. Default is `dc`. #### 36.13.1 Commands This filter supports the all above options as commands. ### 36.14 aderivative, aintegral Compute derivative/integral of audio stream. Applying both filters one after another produces original audio. ### 36.15 adrc Apply spectral dynamic range controller filter to input audio stream. A description of the accepted options follows. transfer Set the transfer expression. The expression can contain the following constants: ch current channel number sn current sample number nb\_channels number of channels t timestamp expressed in seconds sr sample rate p current frequency power value, in dB f current frequency in Hz Default value is `p`. attack Set the attack in milliseconds. Default is `50` milliseconds. Allowed range is from 1 to 1000 milliseconds. release Set the release in milliseconds. Default is `100` milliseconds. Allowed range is from 5 to 2000 milliseconds. channels Set which channels to filter, by default `all` channels in audio stream are filtered. #### 36.15.1 Commands This filter supports the all above options as commands. #### 36.15.2 Examples * Apply spectral compression to all frequencies with threshold of -50 dB and 1:6 ratio: adrc=transfer='if(gt(p,-50),-50+(p-(-50))/6,p)':attack=50:release=100 * Similar to above but with 1:2 ratio and filtering only front center channel: adrc=transfer='if(gt(p,-50),-50+(p-(-50))/2,p)':attack=50:release=100:channels=FC * Apply spectral noise gate to all frequencies with threshold of -85 dB and with short attack time and short release time: adrc=transfer='if(lte(p,-85),p-800,p)':attack=1:release=5 * Apply spectral expansion to all frequencies with threshold of -10 dB and 1:2 ratio: adrc=transfer='if(lt(p,-10),-10+(p-(-10))\*2,p)':attack=50:release=100 * Apply limiter to max -60 dB to all frequencies, with attack of 2 ms and release of 10 ms: adrc=transfer='min(p,-60)':attack=2:release=10 ### 36.16 adynamicequalizer Apply dynamic equalization to input audio stream. A description of the accepted options follows. threshold Set the detection threshold used to trigger equalization. Threshold detection is using detection filter. Default value is 0. Allowed range is from 0 to 100. dfrequency Set the detection frequency in Hz used for detection filter used to trigger equalization. Default value is 1000 Hz. Allowed range is between 2 and 1000000 Hz. dqfactor Set the detection resonance factor for detection filter used to trigger equalization. Default value is 1. Allowed range is from 0.001 to 1000. tfrequency Set the target frequency of equalization filter. Default value is 1000 Hz. Allowed range is between 2 and 1000000 Hz. tqfactor Set the target resonance factor for target equalization filter. Default value is 1. Allowed range is from 0.001 to 1000. attack Set the amount of milliseconds the signal from detection has to rise above the detection threshold before equalization starts. Default is 20. Allowed range is between 1 and 2000. release Set the amount of milliseconds the signal from detection has to fall below the detection threshold before equalization ends. Default is 200. Allowed range is between 1 and 2000. ratio Set the ratio by which the equalization gain is raised. Default is 1. Allowed range is between 0 and 30. makeup Set the makeup offset by which the equalization gain is raised. Default is 0. Allowed range is between 0 and 100. range Set the max allowed cut/boost amount. Default is 50. Allowed range is from 1 to 200. mode Set the mode of filter operation, can be one of the following: ‘listen’ Output only isolated detection signal. ‘cutbelow’ Cut frequencies below detection threshold. ‘cutabove’ Cut frequencies above detection threshold. ‘boostbelow’ Boost frequencies below detection threshold. ‘boostabove’ Boost frequencies above detection threshold. Default mode is ‘cutbelow’. dftype Set the type of detection filter, can be one of the following: ‘bandpass’ ‘lowpass’ ‘highpass’ ‘peak’ Default type is ‘bandpass’. tftype Set the type of target filter, can be one of the following: ‘bell’ ‘lowshelf’ ‘highshelf’ Default type is ‘bell’. auto Automatically gather threshold from detection filter. By default is ‘disabled’. This option is useful to detect threshold in certain time frame of input audio stream, in such case option value is changed at runtime. Available values are: ‘disabled’ Disable using automatically gathered threshold value. ‘off’ Stop picking threshold value. ‘on’ Start picking threshold value. ‘adaptive’ Adaptively pick threshold value, by calculating sliding window entropy. precision Set which precision to use when processing samples. auto Auto pick internal sample format depending on other filters. float Always use single-floating point precision sample format. double Always use double-floating point precision sample format. #### 36.16.1 Commands This filter supports the all above options as commands. ### 36.17 adynamicsmooth Apply dynamic smoothing to input audio stream. A description of the accepted options follows. sensitivity Set an amount of sensitivity to frequency fluctations. Default is 2. Allowed range is from 0 to 1e+06. basefreq Set a base frequency for smoothing. Default value is 22050. Allowed range is from 2 to 1e+06. #### 36.17.1 Commands This filter supports the all above options as commands. ### 36.18 aecho Apply echoing to the input audio. Echoes are reflected sound and can occur naturally amongst mountains (and sometimes large buildings) when talking or shouting; digital echo effects emulate this behaviour and are often used to help fill out the sound of a single instrument or vocal. The time difference between the original signal and the reflection is the `delay`, and the loudness of the reflected signal is the `decay`. Multiple echoes can have different delays and decays. A description of the accepted parameters follows. in\_gain Set input gain of reflected signal. Default is `0.6`. out\_gain Set output gain of reflected signal. Default is `0.3`. delays Set list of time intervals in milliseconds between original signal and reflections separated by ’|’. Allowed range for each `delay` is `(0 - 90000.0]`. Default is `1000`. decays Set list of loudness of reflected signals separated by ’|’. Allowed range for each `decay` is `(0 - 1.0]`. Default is `0.5`. #### 36.18.1 Examples * Make it sound as if there are twice as many instruments as are actually playing: aecho=0.8:0.88:60:0.4 * If delay is very short, then it sounds like a (metallic) robot playing music: aecho=0.8:0.88:6:0.4 * A longer delay will sound like an open air concert in the mountains: aecho=0.8:0.9:1000:0.3 * Same as above but with one more mountain: aecho=0.8:0.9:1000|1800:0.3|0.25 ### 36.19 aemphasis Audio emphasis filter creates or restores material directly taken from LPs or emphased CDs with different filter curves. E.g. to store music on vinyl the signal has to be altered by a filter first to even out the disadvantages of this recording medium. Once the material is played back the inverse filter has to be applied to restore the distortion of the frequency response. The filter accepts the following options: level\_in Set input gain. level\_out Set output gain. mode Set filter mode. For restoring material use `reproduction` mode, otherwise use `production` mode. Default is `reproduction` mode. type Set filter type. Selects medium. Can be one of the following: col select Columbia. emi select EMI. bsi select BSI (78RPM). riaa select RIAA. cd select Compact Disc (CD). 50fm select 50µs (FM). 75fm select 75µs (FM). 50kf select 50µs (FM-KF). 75kf select 75µs (FM-KF). #### 36.19.1 Commands This filter supports the all above options as commands. ### 36.20 aeval Modify an audio signal according to the specified expressions. This filter accepts one or more expressions (one for each channel), which are evaluated and used to modify a corresponding audio signal. It accepts the following parameters: exprs Set the ’|’-separated expressions list for each separate channel. If the number of input channels is greater than the number of expressions, the last specified expression is used for the remaining output channels. channel\_layout, c Set output channel layout. If not specified, the channel layout is specified by the number of expressions. If set to ‘same’, it will use by default the same input channel layout. Each expression in exprs can contain the following constants and functions: ch channel number of the current expression n number of the evaluated sample, starting from 0 s sample rate t time of the evaluated sample expressed in seconds nb\_in\_channels nb\_out\_channels input and output number of channels val(CH) the value of input channel with number CH Note: this filter is slow. For faster processing you should use a dedicated filter. #### 36.20.1 Examples * Half volume: aeval=val(ch)/2:c=same * Invert phase of the second channel: aeval=val(0)|-val(1) ### 36.21 aexciter An exciter is used to produce high sound that is not present in the original signal. This is done by creating harmonic distortions of the signal which are restricted in range and added to the original signal. An Exciter raises the upper end of an audio signal without simply raising the higher frequencies like an equalizer would do to create a more "crisp" or "brilliant" sound. The filter accepts the following options: level\_in Set input level prior processing of signal. Allowed range is from 0 to 64. Default value is 1. level\_out Set output level after processing of signal. Allowed range is from 0 to 64. Default value is 1. amount Set the amount of harmonics added to original signal. Allowed range is from 0 to 64. Default value is 1. drive Set the amount of newly created harmonics. Allowed range is from 0.1 to 10. Default value is 8.5. blend Set the octave of newly created harmonics. Allowed range is from -10 to 10. Default value is 0. freq Set the lower frequency limit of producing harmonics in Hz. Allowed range is from 2000 to 12000 Hz. Default is 7500 Hz. ceil Set the upper frequency limit of producing harmonics. Allowed range is from 9999 to 20000 Hz. If value is lower than 10000 Hz no limit is applied. listen Mute the original signal and output only added harmonics. By default is disabled. #### 36.21.1 Commands This filter supports the all above options as commands. ### 36.22 afade Apply fade-in/out effect to input audio. A description of the accepted parameters follows. type, t Specify the effect type, can be either `in` for fade-in, or `out` for a fade-out effect. Default is `in`. start\_sample, ss Specify the number of the start sample for starting to apply the fade effect. Default is 0. nb\_samples, ns Specify the number of samples for which the fade effect has to last. At the end of the fade-in effect the output audio will have the same volume as the input audio, at the end of the fade-out transition the output audio will be silence. Default is 44100. start\_time, st Specify the start time of the fade effect. Default is 0. The value must be specified as a time duration; see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If set this option is used instead of start\_sample. duration, d Specify the duration of the fade effect. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. At the end of the fade-in effect the output audio will have the same volume as the input audio, at the end of the fade-out transition the output audio will be silence. By default the duration is determined by nb\_samples. If set this option is used instead of nb\_samples. curve Set curve for fade transition. It accepts the following values: tri select triangular, linear slope (default) qsin select quarter of sine wave hsin select half of sine wave esin select exponential sine wave log select logarithmic ipar select inverted parabola qua select quadratic cub select cubic squ select square root cbr select cubic root par select parabola exp select exponential iqsin select inverted quarter of sine wave ihsin select inverted half of sine wave dese select double-exponential seat desi select double-exponential sigmoid losi select logistic sigmoid sinc select sine cardinal function isinc select inverted sine cardinal function quat select quartic quatr select quartic root qsin2 select squared quarter of sine wave hsin2 select squared half of sine wave nofade no fade applied silence Set the initial gain for fade-in or final gain for fade-out. Default value is `0.0`. unity Set the initial gain for fade-out or final gain for fade-in. Default value is `1.0`. #### 36.22.1 Commands This filter supports the all above options as commands. #### 36.22.2 Examples * Fade in first 15 seconds of audio: afade=t=in:ss=0:d=15 * Fade out last 25 seconds of a 900 seconds audio: afade=t=out:st=875:d=25 ### 36.23 afftdn Denoise audio samples with FFT. A description of the accepted parameters follows. noise\_reduction, nr Set the noise reduction in dB, allowed range is 0.01 to 97. Default value is 12 dB. noise\_floor, nf Set the noise floor in dB, allowed range is -80 to -20. Default value is -50 dB. noise\_type, nt Set the noise type. It accepts the following values: white, w Select white noise. vinyl, v Select vinyl noise. shellac, s Select shellac noise. custom, c Select custom noise, defined in `bn` option. Default value is white noise. band\_noise, bn Set custom band noise profile for every one of 15 bands. Bands are separated by ’ ’ or ’|’. residual\_floor, rf Set the residual floor in dB, allowed range is -80 to -20. Default value is -38 dB. track\_noise, tn Enable noise floor tracking. By default is disabled. With this enabled, noise floor is automatically adjusted. track\_residual, tr Enable residual tracking. By default is disabled. output\_mode, om Set the output mode. It accepts the following values: input, i Pass input unchanged. output, o Pass noise filtered out. noise, n Pass only noise. Default value is output. adaptivity, ad Set the adaptivity factor, used how fast to adapt gains adjustments per each frequency bin. Value 0 enables instant adaptation, while higher values react much slower. Allowed range is from 0 to 1. Default value is 0.5. floor\_offset, fo Set the noise floor offset factor. This option is used to adjust offset applied to measured noise floor. It is only effective when noise floor tracking is enabled. Allowed range is from \-2.0 to 2.0. Default value is 1.0. noise\_link, nl Set the noise link used for multichannel audio. It accepts the following values: none Use unchanged channel’s noise floor. min Use measured min noise floor of all channels. max Use measured max noise floor of all channels. average Use measured average noise floor of all channels. Default value is min. band\_multiplier, bm Set the band multiplier factor, used how much to spread bands across frequency bins. Allowed range is from 0.2 to 5. Default value is 1.25. sample\_noise, sn Toggle capturing and measurement of noise profile from input audio. It accepts the following values: start, begin Start sample noise capture. stop, end Stop sample noise capture and measure new noise band profile. Default value is `none`. gain\_smooth, gs Set gain smooth spatial radius, used to smooth gains applied to each frequency bin. Useful to reduce random music noise artefacts. Higher values increases smoothing of gains. Allowed range is from `0` to `50`. Default value is `0`. #### 36.23.1 Commands This filter supports the some above mentioned options as commands. #### 36.23.2 Examples * Reduce white noise by 10dB, and use previously measured noise floor of -40dB: afftdn=nr=10:nf=-40 * Reduce white noise by 10dB, also set initial noise floor to -80dB and enable automatic tracking of noise floor so noise floor will gradually change during processing: afftdn=nr=10:nf=-80:tn=1 * Reduce noise by 20dB, using noise floor of -40dB and using commands to take noise profile of first 0.4 seconds of input audio: asendcmd=0.0 afftdn sn start,asendcmd=0.4 afftdn sn stop,afftdn=nr=20:nf=-40 ### 36.24 afftfilt Apply arbitrary expressions to samples in frequency domain. real Set frequency domain real expression for each separate channel separated by ’|’. Default is "re". If the number of input channels is greater than the number of expressions, the last specified expression is used for the remaining output channels. imag Set frequency domain imaginary expression for each separate channel separated by ’|’. Default is "im". Each expression in real and imag can contain the following constants and functions: sr sample rate b current frequency bin number nb number of available bins ch channel number of the current expression chs number of channels pts current frame pts re current real part of frequency bin of current channel im current imaginary part of frequency bin of current channel real(b, ch) Return the value of real part of frequency bin at location (bin,channel) imag(b, ch) Return the value of imaginary part of frequency bin at location (bin,channel) win\_size Set window size. Allowed range is from 16 to 131072. Default is `4096` win\_func Set window function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hann, hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default is `hann`. overlap Set window overlap. If set to 1, the recommended overlap for selected window function will be picked. Default is `0.75`. #### 36.24.1 Examples * Leave almost only low frequencies in audio: afftfilt="'real=re \* (1-clip((b/nb)\*b,0,1))':imag='im \* (1-clip((b/nb)\*b,0,1))'" * Apply robotize effect: afftfilt="real='hypot(re,im)\*sin(0)':imag='hypot(re,im)\*cos(0)':win\_size=512:overlap=0.75" * Apply whisper effect: afftfilt="real='hypot(re,im)\*cos((random(0)\*2-1)\*2\*3.14)':imag='hypot(re,im)\*sin((random(1)\*2-1)\*2\*3.14)':win\_size=128:overlap=0.8" * Apply phase shift: afftfilt="real=re\*cos(1)-im\*sin(1):imag=re\*sin(1)+im\*cos(1)" ### 36.25 afir Apply an arbitrary Finite Impulse Response filter. This filter is designed for applying long FIR filters, up to 60 seconds long. It can be used as component for digital crossover filters, room equalization, cross talk cancellation, wavefield synthesis, auralization, ambiophonics, ambisonics and spatialization. This filter uses the streams higher than first one as FIR coefficients. If the non-first stream holds a single channel, it will be used for all input channels in the first stream, otherwise the number of channels in the non-first stream must be same as the number of channels in the first stream. It accepts the following parameters: dry Set dry gain. This sets input gain. wet Set wet gain. This sets final output gain. length Set Impulse Response filter length. Default is 1, which means whole IR is processed. gtype This option is deprecated, and does nothing. irnorm Set norm to be applied to IR coefficients before filtering. Allowed range is from \-1 to 2. IR coefficients are normalized with calculated vector norm set by this option. For negative values, no norm is calculated, and IR coefficients are not modified at all. Default is 1. irlink For multichannel IR if this option is set to true, all IR channels will be normalized with maximal measured gain of all IR channels coefficients as set by `irnorm` option. When disabled, all IR coefficients in each IR channel will be normalized independently. Default is true. irgain Set gain to be applied to IR coefficients before filtering. Allowed range is 0 to 1. This gain is applied after any gain applied with irnorm option. irfmt Set format of IR stream. Can be `mono` or `input`. Default is `input`. maxir Set max allowed Impulse Response filter duration in seconds. Default is 30 seconds. Allowed range is 0.1 to 60 seconds. response This option is deprecated, and does nothing. channel This option is deprecated, and does nothing. size This option is deprecated, and does nothing. rate This option is deprecated, and does nothing. minp Set minimal partition size used for convolution. Default is 8192. Allowed range is from 1 to 65536. Lower values decreases latency at cost of higher CPU usage. maxp Set maximal partition size used for convolution. Default is 8192. Allowed range is from 8 to 65536. Lower values may increase CPU usage. nbirs Set number of input impulse responses streams which will be switchable at runtime. Allowed range is from 1 to 32. Default is 1. ir Set IR stream which will be used for convolution, starting from 0, should always be lower than supplied value by `nbirs` option. Default is 0. This option can be changed at runtime via commands. precision Set which precision to use when processing samples. auto Auto pick internal sample format depending on other filters. float Always use single-floating point precision sample format. double Always use double-floating point precision sample format. Default value is auto. irload Set when to load IR stream. Can be `init` or `access`. First one load and prepares all IRs on initialization, second one once on first access of specific IR. Default is `init`. #### 36.25.1 Examples * Apply reverb to stream using mono IR file as second input, complete command using ffmpeg: ffmpeg -i input.wav -i middle\_tunnel\_1way\_mono.wav -lavfi afir output.wav * Apply true stereo processing given input stereo stream, and two stereo impulse responses for left and right channel, the impulse response files are files with names l\_ir.wav and r\_ir.wav, and setting irnorm option value: "pan=4C|c0=FL|c1=FL|c2=FR|c3=FR\[a\];amovie=l\_ir.wav\[LIR\];amovie=r\_ir.wav\[RIR\];\[LIR\]\[RIR\]amerge\[ir\];\[a\]\[ir\]afir=irfmt=input:irnorm=1.2,pan=stereo|FL<c0+c2|FR<c1+c3" * Similar to above example, but with `irgain` explicitly set to estimated value and with `irnorm` disabled: "pan=4C|c0=FL|c1=FL|c2=FR|c3=FR\[a\];amovie=l\_ir.wav\[LIR\];amovie=r\_ir.wav\[RIR\];\[LIR\]\[RIR\]amerge\[ir\];\[a\]\[ir\]afir=irfmt=input:irgain=-5dB:irnom=-1,pan=stereo|FL<c0+c2|FR<c1+c3" ### 36.26 aformat Set output format constraints for the input audio. The framework will negotiate the most appropriate format to minimize conversions. It accepts the following parameters: sample\_fmts, f A ’|’-separated list of requested sample formats. sample\_rates, r A ’|’-separated list of requested sample rates. channel\_layouts, cl A ’|’-separated list of requested channel layouts. See (ffmpeg-utils)the Channel Layout section in the ffmpeg-utils(1) manual for the required syntax. If a parameter is omitted, all values are allowed. Force the output to either unsigned 8-bit or signed 16-bit stereo aformat=sample\_fmts=u8|s16:channel\_layouts=stereo ### 36.27 afreqshift Apply frequency shift to input audio samples. The filter accepts the following options: shift Specify frequency shift. Allowed range is -INT\_MAX to INT\_MAX. Default value is 0.0. level Set output gain applied to final output. Allowed range is from 0.0 to 1.0. Default value is 1.0. order Set filter order used for filtering. Allowed range is from 1 to 16. Default value is 8. #### 36.27.1 Commands This filter supports the all above options as commands. ### 36.28 afwtdn Reduce broadband noise from input samples using Wavelets. A description of the accepted options follows. sigma Set the noise sigma, allowed range is from 0 to 1. Default value is 0. This option controls strength of denoising applied to input samples. Most useful way to set this option is via decibels, eg. -45dB. levels Set the number of wavelet levels of decomposition. Allowed range is from 1 to 12. Default value is 10. Setting this too low make denoising performance very poor. wavet Set wavelet type for decomposition of input frame. They are sorted by number of coefficients, from lowest to highest. More coefficients means worse filtering speed, but overall better quality. Available wavelets are: ‘sym2’ ‘sym4’ ‘rbior68’ ‘deb10’ ‘sym10’ ‘coif5’ ‘bl3’ percent Set percent of full denoising. Allowed range is from 0 to 100 percent. Default value is 85 percent or partial denoising. profile If enabled, first input frame will be used as noise profile. If first frame samples contain non-noise performance will be very poor. adaptive If enabled, input frames are analyzed for presence of noise. If noise is detected with high possibility then input frame profile will be used for processing following frames, until new noise frame is detected. samples Set size of single frame in number of samples. Allowed range is from 512 to 65536. Default frame size is 8192 samples. softness Set softness applied inside thresholding function. Allowed range is from 0 to 10. Default softness is 1. #### 36.28.1 Commands This filter supports the all above options as commands. ### 36.29 agate A gate is mainly used to reduce lower parts of a signal. This kind of signal processing reduces disturbing noise between useful signals. Gating is done by detecting the volume below a chosen level threshold and dividing it by the factor set with ratio. The bottom of the noise floor is set via range. Because an exact manipulation of the signal would cause distortion of the waveform the reduction can be levelled over time. This is done by setting attack and release. attack determines how long the signal has to fall below the threshold before any reduction will occur and release sets the time the signal has to rise above the threshold to reduce the reduction again. Shorter signals than the chosen attack time will be left untouched. level\_in Set input level before filtering. Default is 1. Allowed range is from 0.015625 to 64. mode Set the mode of operation. Can be `upward` or `downward`. Default is `downward`. If set to `upward` mode, higher parts of signal will be amplified, expanding dynamic range in upward direction. Otherwise, in case of `downward` lower parts of signal will be reduced. range Set the level of gain reduction when the signal is below the threshold. Default is 0.06125. Allowed range is from 0 to 1. Setting this to 0 disables reduction and then filter behaves like expander. threshold If a signal rises above this level the gain reduction is released. Default is 0.125. Allowed range is from 0 to 1. ratio Set a ratio by which the signal is reduced. Default is 2. Allowed range is from 1 to 9000. attack Amount of milliseconds the signal has to rise above the threshold before gain reduction stops. Default is 20 milliseconds. Allowed range is from 0.01 to 9000. release Amount of milliseconds the signal has to fall below the threshold before the reduction is increased again. Default is 250 milliseconds. Allowed range is from 0.01 to 9000. makeup Set amount of amplification of signal after processing. Default is 1. Allowed range is from 1 to 64. knee Curve the sharp knee around the threshold to enter gain reduction more softly. Default is 2.828427125. Allowed range is from 1 to 8. detection Choose if exact signal should be taken for detection or an RMS like one. Default is `rms`. Can be `peak` or `rms`. link Choose if the average level between all channels or the louder channel affects the reduction. Default is `average`. Can be `average` or `maximum`. #### 36.29.1 Commands This filter supports the all above options as commands. ### 36.30 aiir Apply an arbitrary Infinite Impulse Response filter. It accepts the following parameters: zeros, z Set B/numerator/zeros/reflection coefficients. poles, p Set A/denominator/poles/ladder coefficients. gains, k Set channels gains. dry\_gain Set input gain. wet\_gain Set output gain. format, f Set coefficients format. ‘ll’ lattice-ladder function ‘sf’ analog transfer function ‘tf’ digital transfer function ‘zp’ Z-plane zeros/poles, cartesian (default) ‘pr’ Z-plane zeros/poles, polar radians ‘pd’ Z-plane zeros/poles, polar degrees ‘sp’ S-plane zeros/poles process, r Set type of processing. ‘d’ direct processing ‘s’ serial processing ‘p’ parallel processing precision, e Set filtering precision. ‘dbl’ double-precision floating-point (default) ‘flt’ single-precision floating-point ‘i32’ 32-bit integers ‘i16’ 16-bit integers normalize, n Normalize filter coefficients, by default is enabled. Enabling it will normalize magnitude response at DC to 0dB. mix How much to use filtered signal in output. Default is 1. Range is between 0 and 1. response Show IR frequency response, magnitude(magenta), phase(green) and group delay(yellow) in additional video stream. By default it is disabled. channel Set for which IR channel to display frequency response. By default is first channel displayed. This option is used only when response is enabled. size Set video stream size. This option is used only when response is enabled. Coefficients in `tf` and `sf` format are separated by spaces and are in ascending order. Coefficients in `zp` format are separated by spaces and order of coefficients doesn’t matter. Coefficients in `zp` format are complex numbers with i imaginary unit. Different coefficients and gains can be provided for every channel, in such case use ’|’ to separate coefficients or gains. Last provided coefficients will be used for all remaining channels. #### 36.30.1 Examples * Apply 2 pole elliptic notch at around 5000Hz for 48000 Hz sample rate: aiir=k=1:z=7.957584807809675810E-1 -2.575128568908332300 3.674839853930788710 -2.57512875289799137 7.957586296317130880E-1:p=1 -2.86950072432325953 3.63022088054647218 -2.28075678147272232 6.361362326477423500E-1:f=tf:r=d * Same as above but in `zp` format: aiir=k=0.79575848078096756:z=0.80918701+0.58773007i 0.80918701-0.58773007i 0.80884700+0.58784055i 0.80884700-0.58784055i:p=0.63892345+0.59951235i 0.63892345-0.59951235i 0.79582691+0.44198673i 0.79582691-0.44198673i:f=zp:r=s * Apply 3-rd order analog normalized Butterworth low-pass filter, using analog transfer function format: aiir=z=1.3057 0 0 0:p=1.3057 2.3892 2.1860 1:f=sf:r=d ### 36.31 alimiter The limiter prevents an input signal from rising over a desired threshold. This limiter uses lookahead technology to prevent your signal from distorting. It means that there is a small delay after the signal is processed. Keep in mind that the delay it produces is the attack time you set. The filter accepts the following options: level\_in Set input gain. Default is 1. level\_out Set output gain. Default is 1. limit Don’t let signals above this level pass the limiter. Default is 1. attack The limiter will reach its attenuation level in this amount of time in milliseconds. Default is 5 milliseconds. release Come back from limiting to attenuation 1.0 in this amount of milliseconds. Default is 50 milliseconds. asc When gain reduction is always needed ASC takes care of releasing to an average reduction level rather than reaching a reduction of 0 in the release time. asc\_level Select how much the release time is affected by ASC, 0 means nearly no changes in release time while 1 produces higher release times. level Auto level output signal. Default is enabled. This normalizes audio back to 0dB if enabled. latency Compensate the delay introduced by using the lookahead buffer set with attack parameter. Also flush the valid audio data in the lookahead buffer when the stream hits EOF. Depending on picked setting it is recommended to upsample input 2x or 4x times with aresample before applying this filter. ### 36.32 allpass Apply a two-pole all-pass filter with central frequency (in Hz) frequency, and filter-width width. An all-pass filter changes the audio’s frequency to phase relationship without changing its frequency to amplitude relationship. The filter accepts the following options: frequency, f Set frequency in Hz. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Specify the band-width of a filter in width\_type units. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. order, o Set the filter order, can be 1 or 2. Default is 2. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. #### 36.32.1 Commands This filter supports the following commands: frequency, f Change allpass frequency. Syntax for the command is : "frequency" width\_type, t Change allpass width\_type. Syntax for the command is : "width\_type" width, w Change allpass width. Syntax for the command is : "width" mix, m Change allpass mix. Syntax for the command is : "mix" ### 36.33 aloop Loop audio samples. The filter accepts the following options: loop Set the number of loops. Setting this value to -1 will result in infinite loops. Default is 0. size Set maximal number of samples. Default is 0. start Set first sample of loop. Default is 0. time Set the time of loop start in seconds. Only used if option named start is set to `-1`. ### 36.34 amerge Merge two or more audio streams into a single multi-channel stream. The filter accepts the following options: inputs Set the number of inputs. Default is 2. If the channel layouts of the inputs are disjoint, and therefore compatible, the channel layout of the output will be set accordingly and the channels will be reordered as necessary. If the channel layouts of the inputs are not disjoint, the output will have all the channels of the first input then all the channels of the second input, in that order, and the channel layout of the output will be the default value corresponding to the total number of channels. For example, if the first input is in 2.1 (FL+FR+LF) and the second input is FC+BL+BR, then the output will be in 5.1, with the channels in the following order: a1, a2, b1, a3, b2, b3 (a1 is the first channel of the first input, b1 is the first channel of the second input). On the other hand, if both input are in stereo, the output channels will be in the default order: a1, a2, b1, b2, and the channel layout will be arbitrarily set to 4.0, which may or may not be the expected value. All inputs must have the same sample rate, and format. If inputs do not have the same duration, the output will stop with the shortest. #### 36.34.1 Examples * Merge two mono files into a stereo stream: amovie=left.wav \[l\] ; amovie=right.mp3 \[r\] ; \[l\] \[r\] amerge * Multiple merges assuming 1 video stream and 6 audio streams in input.mkv: ffmpeg -i input.mkv -filter\_complex "\[0:1\]\[0:2\]\[0:3\]\[0:4\]\[0:5\]\[0:6\] amerge=inputs=6" -c:a pcm\_s16le output.mkv ### 36.35 amix Mixes multiple audio inputs into a single output. Note that this filter only supports float samples (the amerge and pan audio filters support many formats). If the amix input has integer samples then aresample will be automatically inserted to perform the conversion to float samples. It accepts the following parameters: inputs The number of inputs. If unspecified, it defaults to 2. duration How to determine the end-of-stream. longest The duration of the longest input. (default) shortest The duration of the shortest input. first The duration of the first input. dropout\_transition The transition time, in seconds, for volume renormalization when an input stream ends. The default value is 2 seconds. weights Specify weight of each input audio stream as a sequence of numbers separated by a space. If fewer weights are specified compared to number of inputs, the last weight is assigned to the remaining inputs. Default weight for each input is 1. normalize Always scale inputs instead of only doing summation of samples. Beware of heavy clipping if inputs are not normalized prior or after filtering by this filter if this option is disabled. By default is enabled. #### 36.35.1 Examples * This will mix 3 input audio streams to a single output with the same duration as the first input and a dropout transition time of 3 seconds: ffmpeg -i INPUT1 -i INPUT2 -i INPUT3 -filter\_complex amix=inputs=3:duration=first:dropout\_transition=3 OUTPUT * This will mix one vocal and one music input audio stream to a single output with the same duration as the longest input. The music will have quarter the weight as the vocals, and the inputs are not normalized: ffmpeg -i VOCALS -i MUSIC -filter\_complex amix=inputs=2:duration=longest:dropout\_transition=0:weights="1 0.25":normalize=0 OUTPUT #### 36.35.2 Commands This filter supports the following commands: weights normalize Syntax is same as option with same name. ### 36.36 amultiply Multiply first audio stream with second audio stream and store result in output audio stream. Multiplication is done by multiplying each sample from first stream with sample at same position from second stream. With this element-wise multiplication one can create amplitude fades and amplitude modulations. ### 36.37 anequalizer High-order parametric multiband equalizer for each channel. It accepts the following parameters: params This option string is in format: "cchn f=cf w=w g=g t=f | ..." Each equalizer band is separated by ’|’. chn Set channel number to which equalization will be applied. If input doesn’t have that channel the entry is ignored. f Set central frequency for band. If input doesn’t have that frequency the entry is ignored. w Set band width in Hertz. g Set band gain in dB. t Set filter type for band, optional, can be: ‘0’ Butterworth, this is default. ‘1’ Chebyshev type 1. ‘2’ Chebyshev type 2. curves With this option activated frequency response of anequalizer is displayed in video stream. size Set video stream size. Only useful if curves option is activated. mgain Set max gain that will be displayed. Only useful if curves option is activated. Setting this to a reasonable value makes it possible to display gain which is derived from neighbour bands which are too close to each other and thus produce higher gain when both are activated. fscale Set frequency scale used to draw frequency response in video output. Can be linear or logarithmic. Default is logarithmic. colors Set color for each channel curve which is going to be displayed in video stream. This is list of color names separated by space or by ’|’. Unrecognised or missing colors will be replaced by white color. #### 36.37.1 Examples * Lower gain by 10 of central frequency 200Hz and width 100 Hz for first 2 channels using Chebyshev type 1 filter: anequalizer=c0 f=200 w=100 g=-10 t=1|c1 f=200 w=100 g=-10 t=1 #### 36.37.2 Commands This filter supports the following commands: change Alter existing filter parameters. Syntax for the commands is : "fN|f=freq|w=width|g=gain" fN is existing filter number, starting from 0, if no such filter is available error is returned. freq set new frequency parameter. width set new width parameter in Hertz. gain set new gain parameter in dB. Full filter invocation with asendcmd may look like this: asendcmd=c=’4.0 anequalizer change 0|f=200|w=50|g=1’,anequalizer=... ### 36.38 anlmdn Reduce broadband noise in audio samples using Non-Local Means algorithm. Each sample is adjusted by looking for other samples with similar contexts. This context similarity is defined by comparing their surrounding patches of size p. Patches are searched in an area of r around the sample. The filter accepts the following options: strength, s Set denoising strength. Allowed range is from 0.00001 to 10000. Default value is 0.00001. patch, p Set patch radius duration. Allowed range is from 1 to 100 milliseconds. Default value is 2 milliseconds. research, r Set research radius duration. Allowed range is from 2 to 300 milliseconds. Default value is 6 milliseconds. output, o Set the output mode. It accepts the following values: i Pass input unchanged. o Pass noise filtered out. n Pass only noise. Default value is o. smooth, m Set smooth factor. Default value is 11. Allowed range is from 1 to 1000. #### 36.38.1 Commands This filter supports the all above options as commands. ### 36.39 anlmf, anlms Apply Normalized Least-Mean-(Squares|Fourth) algorithm to the first audio stream using the second audio stream. This adaptive filter is used to mimic a desired filter by finding the filter coefficients that relate to producing the least mean square of the error signal (difference between the desired, 2nd input audio stream and the actual signal, the 1st input audio stream). A description of the accepted options follows. order Set filter order. mu Set filter mu. eps Set the filter eps. leakage Set the filter leakage. out\_mode It accepts the following values: i Pass the 1st input. d Pass the 2nd input. o Pass difference between desired, 2nd input and error signal estimate. n Pass difference between input, 1st input and error signal estimate. e Pass error signal estimated samples. Default value is o. precision Set which precision to use when processing samples. auto Auto pick internal sample format depending on other filters. float Always use single-floating point precision sample format. double Always use double-floating point precision sample format. #### 36.39.1 Examples * One of many usages of this filter is noise reduction, input audio is filtered with same samples that are delayed by fixed amount, one such example for stereo audio is: asplit\[a\]\[b\],\[a\]adelay=32S|32S\[a\],\[b\]\[a\]anlms=order=128:leakage=0.0005:mu=.5:out\_mode=o #### 36.39.2 Commands This filter supports the same commands as options, excluding option `order`. ### 36.40 anull Pass the audio source unchanged to the output. ### 36.41 apad Pad the end of an audio stream with silence. This can be used together with `ffmpeg` \-shortest to extend audio streams to the same length as the video stream. A description of the accepted options follows. packet\_size Set silence packet size. Default value is 4096. pad\_len Set the number of samples of silence to add to the end. After the value is reached, the stream is terminated. This option is mutually exclusive with whole\_len. whole\_len Set the minimum total number of samples in the output audio stream. If the value is longer than the input audio length, silence is added to the end, until the value is reached. This option is mutually exclusive with pad\_len. pad\_dur Specify the duration of samples of silence to add. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. Used only if set to non-negative value. whole\_dur Specify the minimum total duration in the output audio stream. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. Used only if set to non-negative value. If the value is longer than the input audio length, silence is added to the end, until the value is reached. This option is mutually exclusive with pad\_dur If neither the pad\_len nor the whole\_len nor pad\_dur nor whole\_dur option is set, the filter will add silence to the end of the input stream indefinitely. Note that for ffmpeg 4.4 and earlier a zero pad\_dur or whole\_dur also caused the filter to add silence indefinitely. #### 36.41.1 Examples * Add 1024 samples of silence to the end of the input: apad=pad\_len=1024 * Make sure the audio output will contain at least 10000 samples, pad the input with silence if required: apad=whole\_len=10000 * Use `ffmpeg` to pad the audio input with silence, so that the video stream will always result the shortest and will be converted until the end in the output file when using the shortest option: ffmpeg -i VIDEO -i AUDIO -filter\_complex "\[1:0\]apad" -shortest OUTPUT ### 36.42 aphaser Add a phasing effect to the input audio. A phaser filter creates series of peaks and troughs in the frequency spectrum. The position of the peaks and troughs are modulated so that they vary over time, creating a sweeping effect. A description of the accepted parameters follows. in\_gain Set input gain. Default is 0.4. out\_gain Set output gain. Default is 0.74 delay Set delay in milliseconds. Default is 3.0. decay Set decay. Default is 0.4. speed Set modulation speed in Hz. Default is 0.5. type Set modulation type. Default is triangular. It accepts the following values: ‘triangular, t’ ‘sinusoidal, s’ ### 36.43 aphaseshift Apply phase shift to input audio samples. The filter accepts the following options: shift Specify phase shift. Allowed range is from -1.0 to 1.0. Default value is 0.0. level Set output gain applied to final output. Allowed range is from 0.0 to 1.0. Default value is 1.0. order Set filter order used for filtering. Allowed range is from 1 to 16. Default value is 8. #### 36.43.1 Commands This filter supports the all above options as commands. ### 36.44 apsnr Measure Audio Peak Signal-to-Noise Ratio. This filter takes two audio streams for input, and outputs first audio stream. Results are in dB per channel at end of either input. ### 36.45 apsyclip Apply Psychoacoustic clipper to input audio stream. The filter accepts the following options: level\_in Set input gain. By default it is 1. Range is \[0.015625 - 64\]. level\_out Set output gain. By default it is 1. Range is \[0.015625 - 64\]. clip Set the clipping start value. Default value is 0dBFS or 1. diff Output only difference samples, useful to hear introduced distortions. By default is disabled. adaptive Set strength of adaptive distortion applied. Default value is 0.5. Allowed range is from 0 to 1. iterations Set number of iterations of psychoacoustic clipper. Allowed range is from 1 to 20. Default value is 10. level Auto level output signal. Default is disabled. This normalizes audio back to 0dBFS if enabled. #### 36.45.1 Commands This filter supports the all above options as commands. ### 36.46 apulsator Audio pulsator is something between an autopanner and a tremolo. But it can produce funny stereo effects as well. Pulsator changes the volume of the left and right channel based on a LFO (low frequency oscillator) with different waveforms and shifted phases. This filter have the ability to define an offset between left and right channel. An offset of 0 means that both LFO shapes match each other. The left and right channel are altered equally - a conventional tremolo. An offset of 50% means that the shape of the right channel is exactly shifted in phase (or moved backwards about half of the frequency) - pulsator acts as an autopanner. At 1 both curves match again. Every setting in between moves the phase shift gapless between all stages and produces some "bypassing" sounds with sine and triangle waveforms. The more you set the offset near 1 (starting from the 0.5) the faster the signal passes from the left to the right speaker. The filter accepts the following options: level\_in Set input gain. By default it is 1. Range is \[0.015625 - 64\]. level\_out Set output gain. By default it is 1. Range is \[0.015625 - 64\]. mode Set waveform shape the LFO will use. Can be one of: sine, triangle, square, sawup or sawdown. Default is sine. amount Set modulation. Define how much of original signal is affected by the LFO. offset\_l Set left channel offset. Default is 0. Allowed range is \[0 - 1\]. offset\_r Set right channel offset. Default is 0.5. Allowed range is \[0 - 1\]. width Set pulse width. Default is 1. Allowed range is \[0 - 2\]. timing Set possible timing mode. Can be one of: bpm, ms or hz. Default is hz. bpm Set bpm. Default is 120. Allowed range is \[30 - 300\]. Only used if timing is set to bpm. ms Set ms. Default is 500. Allowed range is \[10 - 2000\]. Only used if timing is set to ms. hz Set frequency in Hz. Default is 2. Allowed range is \[0.01 - 100\]. Only used if timing is set to hz. ### 36.47 aresample Resample the input audio to the specified parameters, using the libswresample library. If none are specified then the filter will automatically convert between its input and output. This filter is also able to stretch/squeeze the audio data to make it match the timestamps or to inject silence / cut out audio to make it match the timestamps, do a combination of both or do neither. The filter accepts the syntax \[sample\_rate:\]resampler\_options, where sample\_rate expresses a sample rate and resampler\_options is a list of key\=value pairs, separated by ":". See the (ffmpeg-resampler)"Resampler Options" section in the ffmpeg-resampler(1) manual for the complete list of supported options. #### 36.47.1 Examples * Resample the input audio to 44100Hz: aresample=44100 * Stretch/squeeze samples to the given timestamps, with a maximum of 1000 samples per second compensation: aresample=async=1000 ### 36.48 areverse Reverse an audio clip. Warning: This filter requires memory to buffer the entire clip, so trimming is suggested. #### 36.48.1 Examples * Take the first 5 seconds of a clip, and reverse it. atrim=end=5,areverse ### 36.49 arls Apply Recursive Least Squares algorithm to the first audio stream using the second audio stream. This adaptive filter is used to mimic a desired filter by recursively finding the filter coefficients that relate to producing the minimal weighted linear least squares cost function of the error signal (difference between the desired, 2nd input audio stream and the actual signal, the 1st input audio stream). A description of the accepted options follows. order Set the filter order. lambda Set the forgetting factor. delta Set the coefficient to initialize internal covariance matrix. out\_mode Set the filter output samples. It accepts the following values: i Pass the 1st input. d Pass the 2nd input. o Pass difference between desired, 2nd input and error signal estimate. n Pass difference between input, 1st input and error signal estimate. e Pass error signal estimated samples. Default value is o. precision Set which precision to use when processing samples. auto Auto pick internal sample format depending on other filters. float Always use single-floating point precision sample format. double Always use double-floating point precision sample format. ### 36.50 arnndn Reduce noise from speech using Recurrent Neural Networks. This filter accepts the following options: model, m Set train model file to load. This option is always required. mix Set how much to mix filtered samples into final output. Allowed range is from -1 to 1. Default value is 1. Negative values are special, they set how much to keep filtered noise in the final filter output. Set this option to -1 to hear actual noise removed from input signal. #### 36.50.1 Commands This filter supports the all above options as commands. ### 36.51 asdr Measure Audio Signal-to-Distortion Ratio. This filter takes two audio streams for input, and outputs first audio stream. Results are in dB per channel at end of either input. ### 36.52 asetnsamples Set the number of samples per each output audio frame. The last output packet may contain a different number of samples, as the filter will flush all the remaining samples when the input audio signals its end. The filter accepts the following options: nb\_out\_samples, n Set the number of frames per each output audio frame. The number is intended as the number of samples _per each channel_. Default value is 1024. pad, p If set to 1, the filter will pad the last audio frame with zeroes, so that the last frame will contain the same number of samples as the previous ones. Default value is 1. For example, to set the number of per-frame samples to 1234 and disable padding for the last frame, use: asetnsamples=n=1234:p=0 ### 36.53 asetrate Set the sample rate without altering the PCM data. This will result in a change of speed and pitch. The filter accepts the following options: sample\_rate, r Set the output sample rate. Default is 44100 Hz. ### 36.54 ashowinfo Show a line containing various information for each input audio frame. The input audio is not modified. The shown line contains a sequence of key/value pairs of the form key:value. The following values are shown in the output: n The (sequential) number of the input frame, starting from 0. pts The presentation timestamp of the input frame, in time base units; the time base depends on the filter input pad, and is usually 1/sample\_rate. pts\_time The presentation timestamp of the input frame in seconds. fmt The sample format. chlayout The channel layout. rate The sample rate for the audio frame. nb\_samples The number of samples (per channel) in the frame. checksum The Adler-32 checksum (printed in hexadecimal) of the audio data. For planar audio, the data is treated as if all the planes were concatenated. plane\_checksums A list of Adler-32 checksums for each data plane. ### 36.55 asisdr Measure Audio Scaled-Invariant Signal-to-Distortion Ratio. This filter takes two audio streams for input, and outputs first audio stream. Results are in dB per channel at end of either input. ### 36.56 asoftclip Apply audio soft clipping. Soft clipping is a type of distortion effect where the amplitude of a signal is saturated along a smooth curve, rather than the abrupt shape of hard-clipping. This filter accepts the following options: type Set type of soft-clipping. It accepts the following values: hard tanh atan cubic exp alg quintic sin erf threshold Set threshold from where to start clipping. Default value is 0dB or 1. output Set gain applied to output. Default value is 0dB or 1. param Set additional parameter which controls sigmoid function. oversample Set oversampling factor. #### 36.56.1 Commands This filter supports the all above options as commands. ### 36.57 aspectralstats Display frequency domain statistical information about the audio channels. Statistics are calculated and stored as metadata for each audio channel and for each audio frame. It accepts the following option: win\_size Set the window length in samples. Default value is 2048. Allowed range is from 32 to 65536. win\_func Set window function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hann, hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default is `hann`. overlap Set window overlap. Allowed range is from `0` to `1`. Default value is `0.5`. measure Select the parameters which are measured. The metadata keys can be used as flags, default is all which measures everything. none disables all measurement. A list of each metadata key follows: mean variance centroid spread skewness kurtosis entropy flatness crest flux slope decrease rolloff ### 36.58 asr Automatic Speech Recognition This filter uses PocketSphinx for speech recognition. To enable compilation of this filter, you need to configure FFmpeg with `--enable-pocketsphinx`. It accepts the following options: rate Set sampling rate of input audio. Defaults is `16000`. This need to match speech models, otherwise one will get poor results. hmm Set dictionary containing acoustic model files. dict Set pronunciation dictionary. lm Set language model file. lmctl Set language model set. lmname Set which language model to use. logfn Set output for log messages. The filter exports recognized speech as the frame metadata `lavfi.asr.text`. ### 36.59 astats Display time domain statistical information about the audio channels. Statistics are calculated and displayed for each audio channel and, where applicable, an overall figure is also given. It accepts the following option: length Short window length in seconds, used for peak and trough RMS measurement. Default is `0.05` (50 milliseconds). Allowed range is `[0 - 10]`. metadata Set metadata injection. All the metadata keys are prefixed with `lavfi.astats.X`, where `X` is channel number starting from 1 or string `Overall`. Default is disabled. Available keys for each channel are: Bit\_depth Crest\_factor DC\_offset Dynamic\_range Entropy Flat\_factor Max\_difference Max\_level Mean\_difference Min\_difference Min\_level Noise\_floor Noise\_floor\_count Number\_of\_Infs Number\_of\_NaNs Number\_of\_denormals Peak\_count Abs\_Peak\_count Peak\_level RMS\_difference RMS\_peak RMS\_trough Zero\_crossings Zero\_crossings\_rate and for `Overall`: Bit\_depth DC\_offset Entropy Flat\_factor Max\_difference Max\_level Mean\_difference Min\_difference Min\_level Noise\_floor Noise\_floor\_count Number\_of\_Infs Number\_of\_NaNs Number\_of\_denormals Number\_of\_samples Peak\_count Abs\_Peak\_count Peak\_level RMS\_difference RMS\_level RMS\_peak RMS\_trough For example, a full key looks like `lavfi.astats.1.DC_offset` or `lavfi.astats.Overall.Peak_count`. Read below for the description of the keys. reset Set the number of frames over which cumulative stats are calculated before being reset. Default is disabled. measure\_perchannel Select the parameters which are measured per channel. The metadata keys can be used as flags, default is all which measures everything. none disables all per channel measurement. measure\_overall Select the parameters which are measured overall. The metadata keys can be used as flags, default is all which measures everything. none disables all overall measurement. A description of the measure keys follow: none no measures all all measures Bit\_depth overall bit depth of audio, i.e. number of bits used for each sample Crest\_factor standard ratio of peak to RMS level (note: not in dB) DC\_offset mean amplitude displacement from zero Dynamic\_range measured dynamic range of audio in dB Entropy entropy measured across whole audio, entropy of value near 1.0 is typically measured for white noise Flat\_factor flatness (i.e. consecutive samples with the same value) of the signal at its peak levels (i.e. either Min\_level or Max\_level) Max\_difference maximal difference between two consecutive samples Max\_level maximal sample level Mean\_difference mean difference between two consecutive samples, i.e. the average of each difference between two consecutive samples Min\_difference minimal difference between two consecutive samples Min\_level minimal sample level Noise\_floor minimum local peak measured in dBFS over a short window Noise\_floor\_count number of occasions (not the number of samples) that the signal attained Noise floor Number\_of\_Infs number of samples with an infinite value Number\_of\_NaNs number of samples with a NaN (not a number) value Number\_of\_denormals number of samples with a subnormal value Number\_of\_samples number of samples Peak\_count number of occasions (not the number of samples) that the signal attained either Min\_level or Max\_level Abs\_Peak\_count number of occasions that the absolute samples taken from the signal attained max absolute value of Min\_level and Max\_level Peak\_level standard peak level measured in dBFS RMS\_difference Root Mean Square difference between two consecutive samples RMS\_level standard RMS level measured in dBFS RMS\_peak RMS\_trough peak and trough values for RMS level measured over a short window, measured in dBFS. Zero crossings number of points where the waveform crosses the zero level axis Zero crossings rate rate of Zero crossings and number of audio samples ### 36.60 asubboost Boost subwoofer frequencies. The filter accepts the following options: dry Set dry gain, how much of original signal is kept. Allowed range is from 0 to 1. Default value is 1.0. wet Set wet gain, how much of filtered signal is kept. Allowed range is from 0 to 1. Default value is 1.0. boost Set max boost factor. Allowed range is from 1 to 12. Default value is 2. decay Set delay line decay gain value. Allowed range is from 0 to 1. Default value is 0.0. feedback Set delay line feedback gain value. Allowed range is from 0 to 1. Default value is 0.9. cutoff Set cutoff frequency in Hertz. Allowed range is 50 to 900. Default value is 100. slope Set slope amount for cutoff frequency. Allowed range is 0.0001 to 1. Default value is 0.5. delay Set delay. Allowed range is from 1 to 100. Default value is 20. channels Set the channels to process. Default value is all available. #### 36.60.1 Commands This filter supports the all above options as commands. ### 36.61 asubcut Cut subwoofer frequencies. This filter allows to set custom, steeper roll off than highpass filter, and thus is able to more attenuate frequency content in stop-band. The filter accepts the following options: cutoff Set cutoff frequency in Hertz. Allowed range is 2 to 200. Default value is 20. order Set filter order. Available values are from 3 to 20. Default value is 10. level Set input gain level. Allowed range is from 0 to 1. Default value is 1. #### 36.61.1 Commands This filter supports the all above options as commands. ### 36.62 asupercut Cut super frequencies. The filter accepts the following options: cutoff Set cutoff frequency in Hertz. Allowed range is 20000 to 192000. Default value is 20000. order Set filter order. Available values are from 3 to 20. Default value is 10. level Set input gain level. Allowed range is from 0 to 1. Default value is 1. #### 36.62.1 Commands This filter supports the all above options as commands. ### 36.63 asuperpass Apply high order Butterworth band-pass filter. The filter accepts the following options: centerf Set center frequency in Hertz. Allowed range is 2 to 999999. Default value is 1000. order Set filter order. Available values are from 4 to 20. Default value is 4. qfactor Set Q-factor. Allowed range is from 0.01 to 100. Default value is 1. level Set input gain level. Allowed range is from 0 to 2. Default value is 1. #### 36.63.1 Commands This filter supports the all above options as commands. ### 36.64 asuperstop Apply high order Butterworth band-stop filter. The filter accepts the following options: centerf Set center frequency in Hertz. Allowed range is 2 to 999999. Default value is 1000. order Set filter order. Available values are from 4 to 20. Default value is 4. qfactor Set Q-factor. Allowed range is from 0.01 to 100. Default value is 1. level Set input gain level. Allowed range is from 0 to 2. Default value is 1. #### 36.64.1 Commands This filter supports the all above options as commands. ### 36.65 atempo Adjust audio tempo. The filter accepts exactly one parameter, the audio tempo. If not specified then the filter will assume nominal 1.0 tempo. Tempo must be in the \[0.5, 100.0\] range. Note that tempo greater than 2 will skip some samples rather than blend them in. If for any reason this is a concern it is always possible to daisy-chain several instances of atempo to achieve the desired product tempo. #### 36.65.1 Examples * Slow down audio to 80% tempo: atempo=0.8 * To speed up audio to 300% tempo: atempo=3 * To speed up audio to 300% tempo by daisy-chaining two atempo instances: atempo=sqrt(3),atempo=sqrt(3) #### 36.65.2 Commands This filter supports the following commands: tempo Change filter tempo scale factor. Syntax for the command is : "tempo" ### 36.66 atilt Apply spectral tilt filter to audio stream. This filter apply any spectral roll-off slope over any specified frequency band. The filter accepts the following options: freq Set central frequency of tilt in Hz. Default is 10000 Hz. slope Set slope direction of tilt. Default is 0. Allowed range is from -1 to 1. width Set width of tilt. Default is 1000. Allowed range is from 100 to 10000. order Set order of tilt filter. level Set input volume level. Allowed range is from 0 to 4. Default is 1. #### 36.66.1 Commands This filter supports the all above options as commands. ### 36.67 atrim Trim the input so that the output contains one continuous subpart of the input. It accepts the following parameters: start Timestamp (in seconds) of the start of the section to keep. I.e. the audio sample with the timestamp start will be the first sample in the output. end Specify time of the first audio sample that will be dropped, i.e. the audio sample immediately preceding the one with the timestamp end will be the last sample in the output. start\_pts Same as start, except this option sets the start timestamp in samples instead of seconds. end\_pts Same as end, except this option sets the end timestamp in samples instead of seconds. duration The maximum duration of the output in seconds. start\_sample The number of the first sample that should be output. end\_sample The number of the first sample that should be dropped. start, end, and duration are expressed as time duration specifications; see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. Note that the first two sets of the start/end options and the duration option look at the frame timestamp, while the \_sample options simply count the samples that pass through the filter. So start/end\_pts and start/end\_sample will give different results when the timestamps are wrong, inexact or do not start at zero. Also note that this filter does not modify the timestamps. If you wish to have the output timestamps start at zero, insert the asetpts filter after the atrim filter. If multiple start or end options are set, this filter tries to be greedy and keep all samples that match at least one of the specified constraints. To keep only the part that matches all the constraints at once, chain multiple atrim filters. The defaults are such that all the input is kept. So it is possible to set e.g. just the end values to keep everything before the specified time. Examples: * Drop everything except the second minute of input: ffmpeg -i INPUT -af atrim=60:120 * Keep only the first 1000 samples: ffmpeg -i INPUT -af atrim=end\_sample=1000 ### 36.68 axcorrelate Calculate normalized windowed cross-correlation between two input audio streams. Resulted samples are always between -1 and 1 inclusive. If result is 1 it means two input samples are highly correlated in that selected segment. Result 0 means they are not correlated at all. If result is -1 it means two input samples are out of phase, which means they cancel each other. The filter accepts the following options: size Set size of segment over which cross-correlation is calculated. Default is 256. Allowed range is from 2 to 131072. algo Set algorithm for cross-correlation. Can be `slow` or `fast` or `best`. Default is `best`. Fast algorithm assumes mean values over any given segment are always zero and thus need much less calculations to make. This is generally not true, but is valid for typical audio streams. #### 36.68.1 Examples * Calculate correlation between channels in stereo audio stream: ffmpeg -i stereo.wav -af channelsplit,axcorrelate=size=1024:algo=fast correlation.wav ### 36.69 bandpass Apply a two-pole Butterworth band-pass filter with central frequency frequency, and (3dB-point) band-width width. The csg option selects a constant skirt gain (peak gain = Q) instead of the default: constant 0dB peak gain. The filter roll off at 6dB per octave (20dB per decade). The filter accepts the following options: frequency, f Set the filter’s central frequency. Default is `3000`. csg Constant skirt gain if set to 1. Defaults to 0. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Specify the band-width of a filter in width\_type units. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.69.1 Commands This filter supports the following commands: frequency, f Change bandpass frequency. Syntax for the command is : "frequency" width\_type, t Change bandpass width\_type. Syntax for the command is : "width\_type" width, w Change bandpass width. Syntax for the command is : "width" mix, m Change bandpass mix. Syntax for the command is : "mix" ### 36.70 bandreject Apply a two-pole Butterworth band-reject filter with central frequency frequency, and (3dB-point) band-width width. The filter roll off at 6dB per octave (20dB per decade). The filter accepts the following options: frequency, f Set the filter’s central frequency. Default is `3000`. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Specify the band-width of a filter in width\_type units. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.70.1 Commands This filter supports the following commands: frequency, f Change bandreject frequency. Syntax for the command is : "frequency" width\_type, t Change bandreject width\_type. Syntax for the command is : "width\_type" width, w Change bandreject width. Syntax for the command is : "width" mix, m Change bandreject mix. Syntax for the command is : "mix" ### 36.71 bass, lowshelf Boost or cut the bass (lower) frequencies of the audio using a two-pole shelving filter with a response similar to that of a standard hi-fi’s tone-controls. This is also known as shelving equalisation (EQ). The filter accepts the following options: gain, g Give the gain at 0 Hz. Its useful range is about -20 (for a large cut) to +20 (for a large boost). Beware of clipping when using a positive gain. frequency, f Set the filter’s central frequency and so can be used to extend or reduce the frequency range to be boosted or cut. The default value is `100` Hz. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Determine how steep is the filter’s shelf transition. poles, p Set number of poles. Default is 2. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.71.1 Commands This filter supports the following commands: frequency, f Change bass frequency. Syntax for the command is : "frequency" width\_type, t Change bass width\_type. Syntax for the command is : "width\_type" width, w Change bass width. Syntax for the command is : "width" gain, g Change bass gain. Syntax for the command is : "gain" mix, m Change bass mix. Syntax for the command is : "mix" ### 36.72 biquad Apply a biquad IIR filter with the given coefficients. Where b0, b1, b2 and a0, a1, a2 are the numerator and denominator coefficients respectively. and channels, c specify which channels to filter, by default all available are filtered. #### 36.72.1 Commands This filter supports the following commands: a0 a1 a2 b0 b1 b2 Change biquad parameter. Syntax for the command is : "value" mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. ### 36.73 bs2b Bauer stereo to binaural transformation, which improves headphone listening of stereo audio records. To enable compilation of this filter you need to configure FFmpeg with `--enable-libbs2b`. It accepts the following parameters: profile Pre-defined crossfeed level. default Default level (fcut=700, feed=50). cmoy Chu Moy circuit (fcut=700, feed=60). jmeier Jan Meier circuit (fcut=650, feed=95). fcut Cut frequency (in Hz). feed Feed level (in Hz). ### 36.74 channelmap Remap input channels to new locations. It accepts the following parameters: map Map channels from input to output. The argument is a ’|’-separated list of mappings, each in the `in_channel-out_channel` or `in_channel` form. in\_channel can be either the name of the input channel (e.g. FL for front left) or its index in the input channel layout. out\_channel is the name of the output channel or its index in the output channel layout. If out\_channel is not given then it is implicitly an index, starting with zero and increasing by one for each mapping. Mixing different types of mappings is not allowed and will result in a parse error. channel\_layout The channel layout of the output stream. If not specified, then filter will guess it based on the out\_channel names or the number of mappings. Guessed layouts will not necessarily contain channels in the order of the mappings. If no mapping is present, the filter will implicitly map input channels to output channels, preserving indices. #### 36.74.1 Examples * For example, assuming a 5.1+downmix input MOV file, ffmpeg -i in.mov -filter 'channelmap=map=DL-FL|DR-FR' out.wav will create an output WAV file tagged as stereo from the downmix channels of the input. * To fix a 5.1 WAV improperly encoded in AAC’s native channel order ffmpeg -i in.wav -filter 'channelmap=1|2|0|5|3|4:5.1' out.wav ### 36.75 channelsplit Split each channel from an input audio stream into a separate output stream. It accepts the following parameters: channel\_layout The channel layout of the input stream. The default is "stereo". channels A channel layout describing the channels to be extracted as separate output streams or "all" to extract each input channel as a separate stream. The default is "all". Choosing channels not present in channel layout in the input will result in an error. #### 36.75.1 Examples * For example, assuming a stereo input MP3 file, ffmpeg -i in.mp3 -filter\_complex channelsplit out.mkv will create an output Matroska file with two audio streams, one containing only the left channel and the other the right channel. * Split a 5.1 WAV file into per-channel files: ffmpeg -i in.wav -filter\_complex 'channelsplit=channel\_layout=5.1\[FL\]\[FR\]\[FC\]\[LFE\]\[SL\]\[SR\]' -map '\[FL\]' front\_left.wav -map '\[FR\]' front\_right.wav -map '\[FC\]' front\_center.wav -map '\[LFE\]' lfe.wav -map '\[SL\]' side\_left.wav -map '\[SR\]' side\_right.wav * Extract only LFE from a 5.1 WAV file: ffmpeg -i in.wav -filter\_complex 'channelsplit=channel\_layout=5.1:channels=LFE\[LFE\]' -map '\[LFE\]' lfe.wav ### 36.76 chorus Add a chorus effect to the audio. Can make a single vocal sound like a chorus, but can also be applied to instrumentation. Chorus resembles an echo effect with a short delay, but whereas with echo the delay is constant, with chorus, it is varied using using sinusoidal or triangular modulation. The modulation depth defines the range the modulated delay is played before or after the delay. Hence the delayed sound will sound slower or faster, that is the delayed sound tuned around the original one, like in a chorus where some vocals are slightly off key. It accepts the following parameters: in\_gain Set input gain. Default is 0.4. out\_gain Set output gain. Default is 0.4. delays Set delays. A typical delay is around 40ms to 60ms. decays Set decays. speeds Set speeds. depths Set depths. #### 36.76.1 Examples * A single delay: chorus=0.7:0.9:55:0.4:0.25:2 * Two delays: chorus=0.6:0.9:50|60:0.4|0.32:0.25|0.4:2|1.3 * Fuller sounding chorus with three delays: chorus=0.5:0.9:50|60|40:0.4|0.32|0.3:0.25|0.4|0.3:2|2.3|1.3 ### 36.77 compand Compress or expand the audio’s dynamic range. It accepts the following parameters: attacks decays A list of times in seconds for each channel over which the instantaneous level of the input signal is averaged to determine its volume. attacks refers to increase of volume and decays refers to decrease of volume. For most situations, the attack time (response to the audio getting louder) should be shorter than the decay time, because the human ear is more sensitive to sudden loud audio than sudden soft audio. A typical value for attack is 0.3 seconds and a typical value for decay is 0.8 seconds. If specified number of attacks & decays is lower than number of channels, the last set attack/decay will be used for all remaining channels. points A list of points for the transfer function, specified in dB relative to the maximum possible signal amplitude. Each key points list must be defined using the following syntax: `x0/y0|x1/y1|x2/y2|....` or `x0/y0 x1/y1 x2/y2 ....` The input values must be in strictly increasing order but the transfer function does not have to be monotonically rising. The point `0/0` is assumed but may be overridden (by `0/out-dBn`). Typical values for the transfer function are `-70/-70|-60/-20|1/0`. soft-knee Set the curve radius in dB for all joints. It defaults to 0.01. gain Set the additional gain in dB to be applied at all points on the transfer function. This allows for easy adjustment of the overall gain. It defaults to 0. volume Set an initial volume, in dB, to be assumed for each channel when filtering starts. This permits the user to supply a nominal level initially, so that, for example, a very large gain is not applied to initial signal levels before the companding has begun to operate. A typical value for audio which is initially quiet is -90 dB. It defaults to 0. delay Set a delay, in seconds. The input audio is analyzed immediately, but audio is delayed before being fed to the volume adjuster. Specifying a delay approximately equal to the attack/decay times allows the filter to effectively operate in predictive rather than reactive mode. It defaults to 0. #### 36.77.1 Examples * Make music with both quiet and loud passages suitable for listening to in a noisy environment: compand=.3|.3:1|1:-90/-60|-60/-40|-40/-30|-20/-20:6:0:-90:0.2 Another example for audio with whisper and explosion parts: compand=0|0:1|1:-90/-900|-70/-70|-30/-9|0/-3:6:0:0:0 * A noise gate for when the noise is at a lower level than the signal: compand=.1|.1:.2|.2:-900/-900|-50.1/-900|-50/-50:.01:0:-90:.1 * Here is another noise gate, this time for when the noise is at a higher level than the signal (making it, in some ways, similar to squelch): compand=.1|.1:.1|.1:-45.1/-45.1|-45/-900|0/-900:.01:45:-90:.1 * 2:1 compression starting at -6dB: compand=points=-80/-80|-6/-6|0/-3.8|20/3.5 * 2:1 compression starting at -9dB: compand=points=-80/-80|-9/-9|0/-5.3|20/2.9 * 2:1 compression starting at -12dB: compand=points=-80/-80|-12/-12|0/-6.8|20/1.9 * 2:1 compression starting at -18dB: compand=points=-80/-80|-18/-18|0/-9.8|20/0.7 * 3:1 compression starting at -15dB: compand=points=-80/-80|-15/-15|0/-10.8|20/-5.2 * Compressor/Gate: compand=points=-80/-105|-62/-80|-15.4/-15.4|0/-12|20/-7.6 * Expander: compand=attacks=0:points=-80/-169|-54/-80|-49.5/-64.6|-41.1/-41.1|-25.8/-15|-10.8/-4.5|0/0|20/8.3 * Hard limiter at -6dB: compand=attacks=0:points=-80/-80|-6/-6|20/-6 * Hard limiter at -12dB: compand=attacks=0:points=-80/-80|-12/-12|20/-12 * Hard noise gate at -35 dB: compand=attacks=0:points=-80/-115|-35.1/-80|-35/-35|20/20 * Soft limiter: compand=attacks=0:points=-80/-80|-12.4/-12.4|-6/-8|0/-6.8|20/-2.8 ### 36.78 compensationdelay Compensation Delay Line is a metric based delay to compensate differing positions of microphones or speakers. For example, you have recorded guitar with two microphones placed in different locations. Because the front of sound wave has fixed speed in normal conditions, the phasing of microphones can vary and depends on their location and interposition. The best sound mix can be achieved when these microphones are in phase (synchronized). Note that a distance of ~30 cm between microphones makes one microphone capture the signal in antiphase to the other microphone. That makes the final mix sound moody. This filter helps to solve phasing problems by adding different delays to each microphone track and make them synchronized. The best result can be reached when you take one track as base and synchronize other tracks one by one with it. Remember that synchronization/delay tolerance depends on sample rate, too. Higher sample rates will give more tolerance. The filter accepts the following parameters: mm Set millimeters distance. This is compensation distance for fine tuning. Default is 0. cm Set cm distance. This is compensation distance for tightening distance setup. Default is 0. m Set meters distance. This is compensation distance for hard distance setup. Default is 0. dry Set dry amount. Amount of unprocessed (dry) signal. Default is 0. wet Set wet amount. Amount of processed (wet) signal. Default is 1. temp Set temperature in degrees Celsius. This is the temperature of the environment. Default is 20. #### 36.78.1 Commands This filter supports the all above options as commands. ### 36.79 crossfeed Apply headphone crossfeed filter. Crossfeed is the process of blending the left and right channels of stereo audio recording. It is mainly used to reduce extreme stereo separation of low frequencies. The intent is to produce more speaker like sound to the listener. The filter accepts the following options: strength Set strength of crossfeed. Default is 0.2. Allowed range is from 0 to 1. This sets gain of low shelf filter for side part of stereo image. Default is -6dB. Max allowed is -30db when strength is set to 1. range Set soundstage wideness. Default is 0.5. Allowed range is from 0 to 1. This sets cut off frequency of low shelf filter. Default is cut off near 1550 Hz. With range set to 1 cut off frequency is set to 2100 Hz. slope Set curve slope of low shelf filter. Default is 0.5. Allowed range is from 0.01 to 1. level\_in Set input gain. Default is 0.9. level\_out Set output gain. Default is 1. block\_size Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.79.1 Commands This filter supports the all above options as commands. ### 36.80 crystalizer Simple algorithm for audio noise sharpening. This filter linearly increases differences between each audio sample. The filter accepts the following options: i Sets the intensity of effect (default: 2.0). Must be in range between -10.0 to 0 (unchanged sound) to 10.0 (maximum effect). To inverse filtering use negative value. c Enable clipping. By default is enabled. #### 36.80.1 Commands This filter supports the all above options as commands. ### 36.81 dcshift Apply a DC shift to the audio. This can be useful to remove a DC offset (caused perhaps by a hardware problem in the recording chain) from the audio. The effect of a DC offset is reduced headroom and hence volume. The astats filter can be used to determine if a signal has a DC offset. shift Set the DC shift, allowed range is \[-1, 1\]. It indicates the amount to shift the audio. limitergain Optional. It should have a value much less than 1 (e.g. 0.05 or 0.02) and is used to prevent clipping. ### 36.82 deesser Apply de-essing to the audio samples. i Set intensity for triggering de-essing. Allowed range is from 0 to 1. Default is 0. m Set amount of ducking on treble part of sound. Allowed range is from 0 to 1. Default is 0.5. f How much of original frequency content to keep when de-essing. Allowed range is from 0 to 1. Default is 0.5. s Set the output mode. It accepts the following values: i Pass input unchanged. o Pass ess filtered out. e Pass only ess. Default value is o. ### 36.83 dialoguenhance Enhance dialogue in stereo audio. This filter accepts stereo input and produce surround (3.0) channels output. The newly produced front center channel have enhanced speech dialogue originally available in both stereo channels. This filter outputs front left and front right channels same as available in stereo input. The filter accepts the following options: original Set the original center factor to keep in front center channel output. Allowed range is from 0 to 1. Default value is 1. enhance Set the dialogue enhance factor to put in front center channel output. Allowed range is from 0 to 3. Default value is 1. voice Set the voice detection factor. Allowed range is from 2 to 32. Default value is 2. #### 36.83.1 Commands This filter supports the all above options as commands. ### 36.84 drmeter Measure audio dynamic range. DR values of 14 and higher is found in very dynamic material. DR of 8 to 13 is found in transition material. And anything less that 8 have very poor dynamics and is very compressed. The filter accepts the following options: length Set window length in seconds used to split audio into segments of equal length. Default is 3 seconds. ### 36.85 dynaudnorm Dynamic Audio Normalizer. This filter applies a certain amount of gain to the input audio in order to bring its peak magnitude to a target level (e.g. 0 dBFS). However, in contrast to more "simple" normalization algorithms, the Dynamic Audio Normalizer \*dynamically\* re-adjusts the gain factor to the input audio. This allows for applying extra gain to the "quiet" sections of the audio while avoiding distortions or clipping the "loud" sections. In other words: The Dynamic Audio Normalizer will "even out" the volume of quiet and loud sections, in the sense that the volume of each section is brought to the same target level. Note, however, that the Dynamic Audio Normalizer achieves this goal \*without\* applying "dynamic range compressing". It will retain 100% of the dynamic range \*within\* each section of the audio file. framelen, f Set the frame length in milliseconds. In range from 10 to 8000 milliseconds. Default is 500 milliseconds. The Dynamic Audio Normalizer processes the input audio in small chunks, referred to as frames. This is required, because a peak magnitude has no meaning for just a single sample value. Instead, we need to determine the peak magnitude for a contiguous sequence of sample values. While a "standard" normalizer would simply use the peak magnitude of the complete file, the Dynamic Audio Normalizer determines the peak magnitude individually for each frame. The length of a frame is specified in milliseconds. By default, the Dynamic Audio Normalizer uses a frame length of 500 milliseconds, which has been found to give good results with most files. Note that the exact frame length, in number of samples, will be determined automatically, based on the sampling rate of the individual input audio file. gausssize, g Set the Gaussian filter window size. In range from 3 to 301, must be odd number. Default is 31. Probably the most important parameter of the Dynamic Audio Normalizer is the `window size` of the Gaussian smoothing filter. The filter’s window size is specified in frames, centered around the current frame. For the sake of simplicity, this must be an odd number. Consequently, the default value of 31 takes into account the current frame, as well as the 15 preceding frames and the 15 subsequent frames. Using a larger window results in a stronger smoothing effect and thus in less gain variation, i.e. slower gain adaptation. Conversely, using a smaller window results in a weaker smoothing effect and thus in more gain variation, i.e. faster gain adaptation. In other words, the more you increase this value, the more the Dynamic Audio Normalizer will behave like a "traditional" normalization filter. On the contrary, the more you decrease this value, the more the Dynamic Audio Normalizer will behave like a dynamic range compressor. peak, p Set the target peak value. This specifies the highest permissible magnitude level for the normalized audio input. This filter will try to approach the target peak magnitude as closely as possible, but at the same time it also makes sure that the normalized signal will never exceed the peak magnitude. A frame’s maximum local gain factor is imposed directly by the target peak magnitude. The default value is 0.95 and thus leaves a headroom of 5%\*. It is not recommended to go above this value. maxgain, m Set the maximum gain factor. In range from 1.0 to 100.0. Default is 10.0. The Dynamic Audio Normalizer determines the maximum possible (local) gain factor for each input frame, i.e. the maximum gain factor that does not result in clipping or distortion. The maximum gain factor is determined by the frame’s highest magnitude sample. However, the Dynamic Audio Normalizer additionally bounds the frame’s maximum gain factor by a predetermined (global) maximum gain factor. This is done in order to avoid excessive gain factors in "silent" or almost silent frames. By default, the maximum gain factor is 10.0, For most inputs the default value should be sufficient and it usually is not recommended to increase this value. Though, for input with an extremely low overall volume level, it may be necessary to allow even higher gain factors. Note, however, that the Dynamic Audio Normalizer does not simply apply a "hard" threshold (i.e. cut off values above the threshold). Instead, a "sigmoid" threshold function will be applied. This way, the gain factors will smoothly approach the threshold value, but never exceed that value. targetrms, r Set the target RMS. In range from 0.0 to 1.0. Default is 0.0 - disabled. By default, the Dynamic Audio Normalizer performs "peak" normalization. This means that the maximum local gain factor for each frame is defined (only) by the frame’s highest magnitude sample. This way, the samples can be amplified as much as possible without exceeding the maximum signal level, i.e. without clipping. Optionally, however, the Dynamic Audio Normalizer can also take into account the frame’s root mean square, abbreviated RMS. In electrical engineering, the RMS is commonly used to determine the power of a time-varying signal. It is therefore considered that the RMS is a better approximation of the "perceived loudness" than just looking at the signal’s peak magnitude. Consequently, by adjusting all frames to a constant RMS value, a uniform "perceived loudness" can be established. If a target RMS value has been specified, a frame’s local gain factor is defined as the factor that would result in exactly that RMS value. Note, however, that the maximum local gain factor is still restricted by the frame’s highest magnitude sample, in order to prevent clipping. coupling, n Enable channels coupling. By default is enabled. By default, the Dynamic Audio Normalizer will amplify all channels by the same amount. This means the same gain factor will be applied to all channels, i.e. the maximum possible gain factor is determined by the "loudest" channel. However, in some recordings, it may happen that the volume of the different channels is uneven, e.g. one channel may be "quieter" than the other one(s). In this case, this option can be used to disable the channel coupling. This way, the gain factor will be determined independently for each channel, depending only on the individual channel’s highest magnitude sample. This allows for harmonizing the volume of the different channels. correctdc, c Enable DC bias correction. By default is disabled. An audio signal (in the time domain) is a sequence of sample values. In the Dynamic Audio Normalizer these sample values are represented in the -1.0 to 1.0 range, regardless of the original input format. Normally, the audio signal, or "waveform", should be centered around the zero point. That means if we calculate the mean value of all samples in a file, or in a single frame, then the result should be 0.0 or at least very close to that value. If, however, there is a significant deviation of the mean value from 0.0, in either positive or negative direction, this is referred to as a DC bias or DC offset. Since a DC bias is clearly undesirable, the Dynamic Audio Normalizer provides optional DC bias correction. With DC bias correction enabled, the Dynamic Audio Normalizer will determine the mean value, or "DC correction" offset, of each input frame and subtract that value from all of the frame’s sample values which ensures those samples are centered around 0.0 again. Also, in order to avoid "gaps" at the frame boundaries, the DC correction offset values will be interpolated smoothly between neighbouring frames. altboundary, b Enable alternative boundary mode. By default is disabled. The Dynamic Audio Normalizer takes into account a certain neighbourhood around each frame. This includes the preceding frames as well as the subsequent frames. However, for the "boundary" frames, located at the very beginning and at the very end of the audio file, not all neighbouring frames are available. In particular, for the first few frames in the audio file, the preceding frames are not known. And, similarly, for the last few frames in the audio file, the subsequent frames are not known. Thus, the question arises which gain factors should be assumed for the missing frames in the "boundary" region. The Dynamic Audio Normalizer implements two modes to deal with this situation. The default boundary mode assumes a gain factor of exactly 1.0 for the missing frames, resulting in a smooth "fade in" and "fade out" at the beginning and at the end of the input, respectively. compress, s Set the compress factor. In range from 0.0 to 30.0. Default is 0.0. By default, the Dynamic Audio Normalizer does not apply "traditional" compression. This means that signal peaks will not be pruned and thus the full dynamic range will be retained within each local neighbourhood. However, in some cases it may be desirable to combine the Dynamic Audio Normalizer’s normalization algorithm with a more "traditional" compression. For this purpose, the Dynamic Audio Normalizer provides an optional compression (thresholding) function. If (and only if) the compression feature is enabled, all input frames will be processed by a soft knee thresholding function prior to the actual normalization process. Put simply, the thresholding function is going to prune all samples whose magnitude exceeds a certain threshold value. However, the Dynamic Audio Normalizer does not simply apply a fixed threshold value. Instead, the threshold value will be adjusted for each individual frame. In general, smaller parameters result in stronger compression, and vice versa. Values below 3.0 are not recommended, because audible distortion may appear. threshold, t Set the target threshold value. This specifies the lowest permissible magnitude level for the audio input which will be normalized. If input frame volume is above this value frame will be normalized. Otherwise frame may not be normalized at all. The default value is set to 0, which means all input frames will be normalized. This option is mostly useful if digital noise is not wanted to be amplified. channels, h Specify which channels to filter, by default all available channels are filtered. overlap, o Specify overlap for frames. If set to 0 (default) no frame overlapping is done. Using >0 and <1 values will make less conservative gain adjustments, like when framelen option is set to smaller value, if framelen option value is compensated for non-zero overlap then gain adjustments will be smoother across time compared to zero overlap case. curve, v Specify the peak mapping curve expression which is going to be used when calculating gain applied to frames. The max output frame gain will still be limited by other options mentioned previously for this filter. The expression can contain the following constants: ch current channel number sn current sample number nb\_channels number of channels t timestamp expressed in seconds sr sample rate p current frame peak value #### 36.85.1 Commands This filter supports the all above options as commands. ### 36.86 earwax Make audio easier to listen to on headphones. This filter adds ‘cues’ to 44.1kHz stereo (i.e. audio CD format) audio so that when listened to on headphones the stereo image is moved from inside your head (standard for headphones) to outside and in front of the listener (standard for speakers). Ported from SoX. ### 36.87 equalizer Apply a two-pole peaking equalisation (EQ) filter. With this filter, the signal-level at and around a selected frequency can be increased or decreased, whilst (unlike bandpass and bandreject filters) that at all other frequencies is unchanged. In order to produce complex equalisation curves, this filter can be given several times, each with a different central frequency. The filter accepts the following options: frequency, f Set the filter’s central frequency in Hz. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Specify the band-width of a filter in width\_type units. gain, g Set the required gain or attenuation in dB. Beware of clipping when using a positive gain. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.87.1 Examples * Attenuate 10 dB at 1000 Hz, with a bandwidth of 200 Hz: equalizer=f=1000:t=h:width=200:g=-10 * Apply 2 dB gain at 1000 Hz with Q 1 and attenuate 5 dB at 100 Hz with Q 2: equalizer=f=1000:t=q:w=1:g=2,equalizer=f=100:t=q:w=2:g=-5 #### 36.87.2 Commands This filter supports the following commands: frequency, f Change equalizer frequency. Syntax for the command is : "frequency" width\_type, t Change equalizer width\_type. Syntax for the command is : "width\_type" width, w Change equalizer width. Syntax for the command is : "width" gain, g Change equalizer gain. Syntax for the command is : "gain" mix, m Change equalizer mix. Syntax for the command is : "mix" ### 36.88 extrastereo Linearly increases the difference between left and right channels which adds some sort of "live" effect to playback. The filter accepts the following options: m Sets the difference coefficient (default: 2.5). 0.0 means mono sound (average of both channels), with 1.0 sound will be unchanged, with -1.0 left and right channels will be swapped. c Enable clipping. By default is enabled. #### 36.88.1 Commands This filter supports the all above options as commands. ### 36.89 firequalizer Apply FIR Equalization using arbitrary frequency response. The filter accepts the following option: gain Set gain curve equation (in dB). The expression can contain variables: f the evaluated frequency sr sample rate ch channel number, set to 0 when multichannels evaluation is disabled chid channel id, see libavutil/channel\_layout.h, set to the first channel id when multichannels evaluation is disabled chs number of channels chlayout channel\_layout, see libavutil/channel\_layout.h and functions: gain\_interpolate(f) interpolate gain on frequency f based on gain\_entry cubic\_interpolate(f) same as gain\_interpolate, but smoother This option is also available as command. Default is `gain_interpolate(f)`. gain\_entry Set gain entry for gain\_interpolate function. The expression can contain functions: entry(f, g) store gain entry at frequency f with value g This option is also available as command. delay Set filter delay in seconds. Higher value means more accurate. Default is `0.01`. accuracy Set filter accuracy in Hz. Lower value means more accurate. Default is `5`. wfunc Set window function. Acceptable values are: rectangular rectangular window, useful when gain curve is already smooth hann hann window (default) hamming hamming window blackman blackman window nuttall3 3-terms continuous 1st derivative nuttall window mnuttall3 minimum 3-terms discontinuous nuttall window nuttall 4-terms continuous 1st derivative nuttall window bnuttall minimum 4-terms discontinuous nuttall (blackman-nuttall) window bharris blackman-harris window tukey tukey window fixed If enabled, use fixed number of audio samples. This improves speed when filtering with large delay. Default is disabled. multi Enable multichannels evaluation on gain. Default is disabled. zero\_phase Enable zero phase mode by subtracting timestamp to compensate delay. Default is disabled. scale Set scale used by gain. Acceptable values are: linlin linear frequency, linear gain linlog linear frequency, logarithmic (in dB) gain (default) loglin logarithmic (in octave scale where 20 Hz is 0) frequency, linear gain loglog logarithmic frequency, logarithmic gain dumpfile Set file for dumping, suitable for gnuplot. dumpscale Set scale for dumpfile. Acceptable values are same with scale option. Default is linlog. fft2 Enable 2-channel convolution using complex FFT. This improves speed significantly. Default is disabled. min\_phase Enable minimum phase impulse response. Default is disabled. #### 36.89.1 Examples * lowpass at 1000 Hz: firequalizer=gain='if(lt(f,1000), 0, -INF)' * lowpass at 1000 Hz with gain\_entry: firequalizer=gain\_entry='entry(1000,0); entry(1001, -INF)' * custom equalization: firequalizer=gain\_entry='entry(100,0); entry(400, -4); entry(1000, -6); entry(2000, 0)' * higher delay with zero phase to compensate delay: firequalizer=delay=0.1:fixed=on:zero\_phase=on * lowpass on left channel, highpass on right channel: firequalizer=gain='if(eq(chid,1), gain\_interpolate(f), if(eq(chid,2), gain\_interpolate(1e6+f), 0))' :gain\_entry='entry(1000, 0); entry(1001,-INF); entry(1e6+1000,0)':multi=on ### 36.90 flanger Apply a flanging effect to the audio. The filter accepts the following options: delay Set base delay in milliseconds. Range from 0 to 30. Default value is 0. depth Set added sweep delay in milliseconds. Range from 0 to 10. Default value is 2. regen Set percentage regeneration (delayed signal feedback). Range from -95 to 95. Default value is 0. width Set percentage of delayed signal mixed with original. Range from 0 to 100. Default value is 71. speed Set sweeps per second (Hz). Range from 0.1 to 10. Default value is 0.5. shape Set swept wave shape, can be triangular or sinusoidal. Default value is sinusoidal. phase Set swept wave percentage-shift for multi channel. Range from 0 to 100. Default value is 25. interp Set delay-line interpolation, linear or quadratic. Default is linear. ### 36.91 haas Apply Haas effect to audio. Note that this makes most sense to apply on mono signals. With this filter applied to mono signals it give some directionality and stretches its stereo image. The filter accepts the following options: level\_in Set input level. By default is 1, or 0dB level\_out Set output level. By default is 1, or 0dB. side\_gain Set gain applied to side part of signal. By default is 1. middle\_source Set kind of middle source. Can be one of the following: ‘left’ Pick left channel. ‘right’ Pick right channel. ‘mid’ Pick middle part signal of stereo image. ‘side’ Pick side part signal of stereo image. middle\_phase Change middle phase. By default is disabled. left\_delay Set left channel delay. By default is 2.05 milliseconds. left\_balance Set left channel balance. By default is \-1. left\_gain Set left channel gain. By default is 1. left\_phase Change left phase. By default is disabled. right\_delay Set right channel delay. By defaults is 2.12 milliseconds. right\_balance Set right channel balance. By default is 1. right\_gain Set right channel gain. By default is 1. right\_phase Change right phase. By default is enabled. ### 36.92 hdcd Decodes High Definition Compatible Digital (HDCD) data. A 16-bit PCM stream with embedded HDCD codes is expanded into a 20-bit PCM stream. The filter supports the Peak Extend and Low-level Gain Adjustment features of HDCD, and detects the Transient Filter flag. ffmpeg -i HDCD16.flac -af hdcd OUT24.flac When using the filter with wav, note the default encoding for wav is 16-bit, so the resulting 20-bit stream will be truncated back to 16-bit. Use something like `-acodec pcm_s24le` after the filter to get 24-bit PCM output. ffmpeg -i HDCD16.wav -af hdcd OUT16.wav ffmpeg -i HDCD16.wav -af hdcd -c:a pcm\_s24le OUT24.wav The filter accepts the following options: disable\_autoconvert Disable any automatic format conversion or resampling in the filter graph. process\_stereo Process the stereo channels together. If target\_gain does not match between channels, consider it invalid and use the last valid target\_gain. cdt\_ms Set the code detect timer period in ms. force\_pe Always extend peaks above -3dBFS even if PE isn’t signaled. analyze\_mode Replace audio with a solid tone and adjust the amplitude to signal some specific aspect of the decoding process. The output file can be loaded in an audio editor alongside the original to aid analysis. `analyze_mode=pe:force_pe=true` can be used to see all samples above the PE level. Modes are: ‘0, off’ Disabled ‘1, lle’ Gain adjustment level at each sample ‘2, pe’ Samples where peak extend occurs ‘3, cdt’ Samples where the code detect timer is active ‘4, tgm’ Samples where the target gain does not match between channels ### 36.93 headphone Apply head-related transfer functions (HRTFs) to create virtual loudspeakers around the user for binaural listening via headphones. The HRIRs are provided via additional streams, for each channel one stereo input stream is needed. The filter accepts the following options: map Set mapping of input streams for convolution. The argument is a ’|’-separated list of channel names in order as they are given as additional stream inputs for filter. This also specify number of input streams. Number of input streams must be not less than number of channels in first stream plus one. gain Set gain applied to audio. Value is in dB. Default is 0. type Set processing type. Can be time or freq. time is processing audio in time domain which is slow. freq is processing audio in frequency domain which is fast. Default is freq. lfe Set custom gain for LFE channels. Value is in dB. Default is 0. size Set size of frame in number of samples which will be processed at once. Default value is 1024. Allowed range is from 1024 to 96000. hrir Set format of hrir stream. Default value is stereo. Alternative value is multich. If value is set to stereo, number of additional streams should be greater or equal to number of input channels in first input stream. Also each additional stream should have stereo number of channels. If value is set to multich, number of additional streams should be exactly one. Also number of input channels of additional stream should be equal or greater than twice number of channels of first input stream. #### 36.93.1 Examples * Full example using wav files as coefficients with amovie filters for 7.1 downmix, each amovie filter use stereo file with IR coefficients as input. The files give coefficients for each position of virtual loudspeaker: ffmpeg -i input.wav -filter\_complex "amovie=azi\_270\_ele\_0\_DFC.wav\[sr\];amovie=azi\_90\_ele\_0\_DFC.wav\[sl\];amovie=azi\_225\_ele\_0\_DFC.wav\[br\];amovie=azi\_135\_ele\_0\_DFC.wav\[bl\];amovie=azi\_0\_ele\_0\_DFC.wav,asplit\[fc\]\[lfe\];amovie=azi\_35\_ele\_0\_DFC.wav\[fl\];amovie=azi\_325\_ele\_0\_DFC.wav\[fr\];\[0:a\]\[fl\]\[fr\]\[fc\]\[lfe\]\[bl\]\[br\]\[sl\]\[sr\]headphone=FL|FR|FC|LFE|BL|BR|SL|SR" output.wav * Full example using wav files as coefficients with amovie filters for 7.1 downmix, but now in multich hrir format. ffmpeg -i input.wav -filter\_complex "amovie=minp.wav\[hrirs\];\[0:a\]\[hrirs\]headphone=map=FL|FR|FC|LFE|BL|BR|SL|SR:hrir=multich" output.wav ### 36.94 highpass Apply a high-pass filter with 3dB point frequency. The filter can be either single-pole, or double-pole (the default). The filter roll off at 6dB per pole per octave (20dB per pole per decade). The filter accepts the following options: frequency, f Set frequency in Hz. Default is 3000. poles, p Set number of poles. Default is 2. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Specify the band-width of a filter in width\_type units. Applies only to double-pole filter. The default is 0.707q and gives a Butterworth response. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.94.1 Commands This filter supports the following commands: frequency, f Change highpass frequency. Syntax for the command is : "frequency" width\_type, t Change highpass width\_type. Syntax for the command is : "width\_type" width, w Change highpass width. Syntax for the command is : "width" mix, m Change highpass mix. Syntax for the command is : "mix" ### 36.95 join Join multiple input streams into one multi-channel stream. It accepts the following parameters: inputs The number of input streams. It defaults to 2. channel\_layout The desired output channel layout. It defaults to stereo. map Map channels from inputs to output. The argument is a ’|’-separated list of mappings, each in the `input_idx.in_channel-out_channel` form. input\_idx is the 0-based index of the input stream. in\_channel can be either the name of the input channel (e.g. FL for front left) or its index in the specified input stream. out\_channel is the name of the output channel. The filter will attempt to guess the mappings when they are not specified explicitly. It does so by first trying to find an unused matching input channel and if that fails it picks the first unused input channel. Join 3 inputs (with properly set channel layouts): ffmpeg -i INPUT1 -i INPUT2 -i INPUT3 -filter\_complex join=inputs=3 OUTPUT Build a 5.1 output from 6 single-channel streams: ffmpeg -i fl -i fr -i fc -i sl -i sr -i lfe -filter\_complex 'join=inputs=6:channel\_layout=5.1:map=0.0-FL|1.0-FR|2.0-FC|3.0-SL|4.0-SR|5.0-LFE' out ### 36.96 ladspa Load a LADSPA (Linux Audio Developer’s Simple Plugin API) plugin. To enable compilation of this filter you need to configure FFmpeg with `--enable-ladspa`. file, f Specifies the name of LADSPA plugin library to load. If the environment variable `LADSPA_PATH` is defined, the LADSPA plugin is searched in each one of the directories specified by the colon separated list in `LADSPA_PATH`, otherwise in the standard LADSPA paths, which are in this order: HOME/.ladspa/lib/, /usr/local/lib/ladspa/, /usr/lib/ladspa/. plugin, p Specifies the plugin within the library. Some libraries contain only one plugin, but others contain many of them. If this is not set filter will list all available plugins within the specified library. controls, c Set the ’|’ separated list of controls which are zero or more floating point values that determine the behavior of the loaded plugin (for example delay, threshold or gain). Controls need to be defined using the following syntax: c0=value0|c1=value1|c2=value2|..., where valuei is the value set on the i\-th control. Alternatively they can be also defined using the following syntax: value0|value1|value2|..., where valuei is the value set on the i\-th control. If controls is set to `help`, all available controls and their valid ranges are printed. sample\_rate, s Specify the sample rate, default to 44100. Only used if plugin have zero inputs. nb\_samples, n Set the number of samples per channel per each output frame, default is 1024. Only used if plugin have zero inputs. duration, d Set the minimum duration of the sourced audio. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. Note that the resulting duration may be greater than the specified duration, as the generated audio is always cut at the end of a complete frame. If not specified, or the expressed duration is negative, the audio is supposed to be generated forever. Only used if plugin have zero inputs. latency, l Enable latency compensation, by default is disabled. Only used if plugin have inputs. #### 36.96.1 Examples * List all available plugins within amp (LADSPA example plugin) library: ladspa=file=amp * List all available controls and their valid ranges for `vcf_notch` plugin from `VCF` library: ladspa=f=vcf:p=vcf\_notch:c=help * Simulate low quality audio equipment using `Computer Music Toolkit` (CMT) plugin library: ladspa=file=cmt:plugin=lofi:controls=c0=22|c1=12|c2=12 * Add reverberation to the audio using TAP-plugins (Tom’s Audio Processing plugins): ladspa=file=tap\_reverb:tap\_reverb * Generate white noise, with 0.2 amplitude: ladspa=file=cmt:noise\_source\_white:c=c0=.2 * Generate 20 bpm clicks using plugin `C* Click - Metronome` from the `C* Audio Plugin Suite` (CAPS) library: ladspa=file=caps:Click:c=c1=20' * Apply `C* Eq10X2 - Stereo 10-band equaliser` effect: ladspa=caps:Eq10X2:c=c0=-48|c9=-24|c3=12|c4=2 * Increase volume by 20dB using fast lookahead limiter from Steve Harris `SWH Plugins` collection: ladspa=fast\_lookahead\_limiter\_1913:fastLookaheadLimiter:20|0|2 * Attenuate low frequencies using Multiband EQ from Steve Harris `SWH Plugins` collection: ladspa=mbeq\_1197:mbeq:-24|-24|-24|0|0|0|0|0|0|0|0|0|0|0|0 * Reduce stereo image using `Narrower` from the `C* Audio Plugin Suite` (CAPS) library: ladspa=caps:Narrower * Another white noise, now using `C* Audio Plugin Suite` (CAPS) library: ladspa=caps:White:.2 * Some fractal noise, using `C* Audio Plugin Suite` (CAPS) library: ladspa=caps:Fractal:c=c1=1 * Dynamic volume normalization using `VLevel` plugin: ladspa=vlevel-ladspa:vlevel\_mono #### 36.96.2 Commands This filter supports the following commands: cN Modify the N\-th control value. If the specified value is not valid, it is ignored and prior one is kept. ### 36.97 loudnorm EBU R128 loudness normalization. Includes both dynamic and linear normalization modes. Support for both single pass (livestreams, files) and double pass (files) modes. This algorithm can target IL, LRA, and maximum true peak. In dynamic mode, to accurately detect true peaks, the audio stream will be upsampled to 192 kHz. Use the `-ar` option or `aresample` filter to explicitly set an output sample rate. The filter accepts the following options: I, i Set integrated loudness target. Range is -70.0 - -5.0. Default value is -24.0. LRA, lra Set loudness range target. Range is 1.0 - 50.0. Default value is 7.0. TP, tp Set maximum true peak. Range is -9.0 - +0.0. Default value is -2.0. measured\_I, measured\_i Measured IL of input file. Range is -99.0 - +0.0. measured\_LRA, measured\_lra Measured LRA of input file. Range is 0.0 - 99.0. measured\_TP, measured\_tp Measured true peak of input file. Range is -99.0 - +99.0. measured\_thresh Measured threshold of input file. Range is -99.0 - +0.0. offset Set offset gain. Gain is applied before the true-peak limiter. Range is -99.0 - +99.0. Default is +0.0. linear Normalize by linearly scaling the source audio. `measured_I`, `measured_LRA`, `measured_TP`, and `measured_thresh` must all be specified. Target LRA shouldn’t be lower than source LRA and the change in integrated loudness shouldn’t result in a true peak which exceeds the target TP. If any of these conditions aren’t met, normalization mode will revert to dynamic. Options are `true` or `false`. Default is `true`. dual\_mono Treat mono input files as "dual-mono". If a mono file is intended for playback on a stereo system, its EBU R128 measurement will be perceptually incorrect. If set to `true`, this option will compensate for this effect. Multi-channel input files are not affected by this option. Options are true or false. Default is false. print\_format Set print format for stats. Options are summary, json, or none. Default value is none. ### 36.98 lowpass Apply a low-pass filter with 3dB point frequency. The filter can be either single-pole or double-pole (the default). The filter roll off at 6dB per pole per octave (20dB per pole per decade). The filter accepts the following options: frequency, f Set frequency in Hz. Default is 500. poles, p Set number of poles. Default is 2. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Specify the band-width of a filter in width\_type units. Applies only to double-pole filter. The default is 0.707q and gives a Butterworth response. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.98.1 Examples * Lowpass only LFE channel, it LFE is not present it does nothing: lowpass=c=LFE #### 36.98.2 Commands This filter supports the following commands: frequency, f Change lowpass frequency. Syntax for the command is : "frequency" width\_type, t Change lowpass width\_type. Syntax for the command is : "width\_type" width, w Change lowpass width. Syntax for the command is : "width" mix, m Change lowpass mix. Syntax for the command is : "mix" ### 36.99 lv2 Load a LV2 (LADSPA Version 2) plugin. To enable compilation of this filter you need to configure FFmpeg with `--enable-lv2`. plugin, p Specifies the plugin URI. You may need to escape ’:’. controls, c Set the ’|’ separated list of controls which are zero or more floating point values that determine the behavior of the loaded plugin (for example delay, threshold or gain). If controls is set to `help`, all available controls and their valid ranges are printed. sample\_rate, s Specify the sample rate, default to 44100. Only used if plugin have zero inputs. nb\_samples, n Set the number of samples per channel per each output frame, default is 1024. Only used if plugin have zero inputs. duration, d Set the minimum duration of the sourced audio. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. Note that the resulting duration may be greater than the specified duration, as the generated audio is always cut at the end of a complete frame. If not specified, or the expressed duration is negative, the audio is supposed to be generated forever. Only used if plugin have zero inputs. #### 36.99.1 Examples * Apply bass enhancer plugin from Calf: lv2=p=http\\\\\\\\://calf.sourceforge.net/plugins/BassEnhancer:c=amount=2 * Apply vinyl plugin from Calf: lv2=p=http\\\\\\\\://calf.sourceforge.net/plugins/Vinyl:c=drone=0.2|aging=0.5 * Apply bit crusher plugin from ArtyFX: lv2=p=http\\\\\\\\://www.openavproductions.com/artyfx#bitta:c=crush=0.3 #### 36.99.2 Commands This filter supports all options that are exported by plugin as commands. ### 36.100 mcompand Multiband Compress or expand the audio’s dynamic range. The input audio is divided into bands using 4th order Linkwitz-Riley IIRs. This is akin to the crossover of a loudspeaker, and results in flat frequency response when absent compander action. It accepts the following parameters: args This option syntax is: attack,decay,\[attack,decay..\] soft-knee points crossover\_frequency \[delay \[initial\_volume \[gain\]\]\] | attack,decay ... For explanation of each item refer to compand filter documentation. ### 36.101 pan Mix channels with specific gain levels. The filter accepts the output channel layout followed by a set of channels definitions. This filter is also designed to efficiently remap the channels of an audio stream. The filter accepts parameters of the form: "l|outdef|outdef|..." l output channel layout or number of channels outdef output channel specification, of the form: "out\_name\=\[gain\*\]in\_name\[(+-)\[gain\*\]in\_name...\]" out\_name output channel to define, either a channel name (FL, FR, etc.) or a channel number (c0, c1, etc.) gain multiplicative coefficient for the channel, 1 leaving the volume unchanged in\_name input channel to use, see out\_name for details; it is not possible to mix named and numbered input channels If the ‘=’ in a channel specification is replaced by ‘<’, then the gains for that specification will be renormalized so that the total is 1, thus avoiding clipping noise. #### 36.101.1 Mixing examples For example, if you want to down-mix from stereo to mono, but with a bigger factor for the left channel: pan=1c|c0=0.9\*c0+0.1\*c1 A customized down-mix to stereo that works automatically for 3-, 4-, 5- and 7-channels surround: pan=stereo| FL < FL + 0.5\*FC + 0.6\*BL + 0.6\*SL | FR < FR + 0.5\*FC + 0.6\*BR + 0.6\*SR Note that `ffmpeg` integrates a default down-mix (and up-mix) system that should be preferred (see "-ac" option) unless you have very specific needs. #### 36.101.2 Remapping examples The channel remapping will be effective if, and only if: * gain coefficients are zeroes or ones, * only one input per channel output, If all these conditions are satisfied, the filter will notify the user ("Pure channel mapping detected"), and use an optimized and lossless method to do the remapping. For example, if you have a 5.1 source and want a stereo audio stream by dropping the extra channels: pan="stereo| c0=FL | c1=FR" Given the same source, you can also switch front left and front right channels and keep the input channel layout: pan="5.1| c0=c1 | c1=c0 | c2=c2 | c3=c3 | c4=c4 | c5=c5" If the input is a stereo audio stream, you can mute the front left channel (and still keep the stereo channel layout) with: pan="stereo|c1=c1" Still with a stereo audio stream input, you can copy the right channel in both front left and right: pan="stereo| c0=FR | c1=FR" ### 36.102 replaygain ReplayGain scanner filter. This filter takes an audio stream as an input and outputs it unchanged. At end of filtering it displays `track_gain` and `track_peak`. The filter accepts the following exported read-only options: track\_gain Exported track gain in dB at end of stream. track\_peak Exported track peak at end of stream. ### 36.103 resample Convert the audio sample format, sample rate and channel layout. It is not meant to be used directly. ### 36.104 rubberband Apply time-stretching and pitch-shifting with librubberband. To enable compilation of this filter, you need to configure FFmpeg with `--enable-librubberband`. The filter accepts the following options: tempo Set tempo scale factor. pitch Set pitch scale factor. transients Set transients detector. Possible values are: crisp mixed smooth detector Set detector. Possible values are: compound percussive soft phase Set phase. Possible values are: laminar independent window Set processing window size. Possible values are: standard short long smoothing Set smoothing. Possible values are: off on formant Enable formant preservation when shift pitching. Possible values are: shifted preserved pitchq Set pitch quality. Possible values are: quality speed consistency channels Set channels. Possible values are: apart together #### 36.104.1 Commands This filter supports the following commands: tempo Change filter tempo scale factor. Syntax for the command is : "tempo" pitch Change filter pitch scale factor. Syntax for the command is : "pitch" ### 36.105 sidechaincompress This filter acts like normal compressor but has the ability to compress detected signal using second input signal. It needs two input streams and returns one output stream. First input stream will be processed depending on second stream signal. The filtered signal then can be filtered with other filters in later stages of processing. See pan and amerge filter. The filter accepts the following options: level\_in Set input gain. Default is 1. Range is between 0.015625 and 64. mode Set mode of compressor operation. Can be `upward` or `downward`. Default is `downward`. threshold If a signal of second stream raises above this level it will affect the gain reduction of first stream. By default is 0.125. Range is between 0.00097563 and 1. ratio Set a ratio about which the signal is reduced. 1:2 means that if the level raised 4dB above the threshold, it will be only 2dB above after the reduction. Default is 2. Range is between 1 and 20. attack Amount of milliseconds the signal has to rise above the threshold before gain reduction starts. Default is 20. Range is between 0.01 and 2000. release Amount of milliseconds the signal has to fall below the threshold before reduction is decreased again. Default is 250. Range is between 0.01 and 9000. makeup Set the amount by how much signal will be amplified after processing. Default is 1. Range is from 1 to 64. knee Curve the sharp knee around the threshold to enter gain reduction more softly. Default is 2.82843. Range is between 1 and 8. link Choose if the `average` level between all channels of side-chain stream or the louder(`maximum`) channel of side-chain stream affects the reduction. Default is `average`. detection Should the exact signal be taken in case of `peak` or an RMS one in case of `rms`. Default is `rms` which is mainly smoother. level\_sc Set sidechain gain. Default is 1. Range is between 0.015625 and 64. mix How much to use compressed signal in output. Default is 1. Range is between 0 and 1. #### 36.105.1 Commands This filter supports the all above options as commands. #### 36.105.2 Examples * Full ffmpeg example taking 2 audio inputs, 1st input to be compressed depending on the signal of 2nd input and later compressed signal to be merged with 2nd input: ffmpeg -i main.flac -i sidechain.flac -filter\_complex "\[1:a\]asplit=2\[sc\]\[mix\];\[0:a\]\[sc\]sidechaincompress\[compr\];\[compr\]\[mix\]amerge" ### 36.106 sidechaingate A sidechain gate acts like a normal (wideband) gate but has the ability to filter the detected signal before sending it to the gain reduction stage. Normally a gate uses the full range signal to detect a level above the threshold. For example: If you cut all lower frequencies from your sidechain signal the gate will decrease the volume of your track only if not enough highs appear. With this technique you are able to reduce the resonation of a natural drum or remove "rumbling" of muted strokes from a heavily distorted guitar. It needs two input streams and returns one output stream. First input stream will be processed depending on second stream signal. The filter accepts the following options: level\_in Set input level before filtering. Default is 1. Allowed range is from 0.015625 to 64. mode Set the mode of operation. Can be `upward` or `downward`. Default is `downward`. If set to `upward` mode, higher parts of signal will be amplified, expanding dynamic range in upward direction. Otherwise, in case of `downward` lower parts of signal will be reduced. range Set the level of gain reduction when the signal is below the threshold. Default is 0.06125. Allowed range is from 0 to 1. Setting this to 0 disables reduction and then filter behaves like expander. threshold If a signal rises above this level the gain reduction is released. Default is 0.125. Allowed range is from 0 to 1. ratio Set a ratio about which the signal is reduced. Default is 2. Allowed range is from 1 to 9000. attack Amount of milliseconds the signal has to rise above the threshold before gain reduction stops. Default is 20 milliseconds. Allowed range is from 0.01 to 9000. release Amount of milliseconds the signal has to fall below the threshold before the reduction is increased again. Default is 250 milliseconds. Allowed range is from 0.01 to 9000. makeup Set amount of amplification of signal after processing. Default is 1. Allowed range is from 1 to 64. knee Curve the sharp knee around the threshold to enter gain reduction more softly. Default is 2.828427125. Allowed range is from 1 to 8. detection Choose if exact signal should be taken for detection or an RMS like one. Default is rms. Can be peak or rms. link Choose if the average level between all channels or the louder channel affects the reduction. Default is average. Can be average or maximum. level\_sc Set sidechain gain. Default is 1. Range is from 0.015625 to 64. #### 36.106.1 Commands This filter supports the all above options as commands. ### 36.107 silencedetect Detect silence in an audio stream. This filter logs a message when it detects that the input audio volume is less or equal to a noise tolerance value for a duration greater or equal to the minimum detected noise duration. The printed times and duration are expressed in seconds. The `lavfi.silence_start` or `lavfi.silence_start.X` metadata key is set on the first frame whose timestamp equals or exceeds the detection duration and it contains the timestamp of the first frame of the silence. The `lavfi.silence_duration` or `lavfi.silence_duration.X` and `lavfi.silence_end` or `lavfi.silence_end.X` metadata keys are set on the first frame after the silence. If mono is enabled, and each channel is evaluated separately, the `.X` suffixed keys are used, and `X` corresponds to the channel number. The filter accepts the following options: noise, n Set noise tolerance. Can be specified in dB (in case "dB" is appended to the specified value) or amplitude ratio. Default is -60dB, or 0.001. duration, d Set silence duration until notification (default is 2 seconds). See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. mono, m Process each channel separately, instead of combined. By default is disabled. #### 36.107.1 Examples * Detect 5 seconds of silence with -50dB noise tolerance: silencedetect=n=-50dB:d=5 * Complete example with `ffmpeg` to detect silence with 0.0001 noise tolerance in silence.mp3: ffmpeg -i silence.mp3 -af silencedetect=noise=0.0001 -f null - ### 36.108 silenceremove Remove silence from the beginning, middle or end of the audio. The filter accepts the following options: start\_periods This value is used to indicate if audio should be trimmed at beginning of the audio. A value of zero indicates no silence should be trimmed from the beginning. When specifying a non-zero value, it trims audio up until it finds non-silence. Normally, when trimming silence from beginning of audio the start\_periods will be `1` but it can be increased to higher values to trim all audio up to specific count of non-silence periods. Default value is `0`. start\_duration Specify the amount of time that non-silence must be detected before it stops trimming audio. By increasing the duration, bursts of noises can be treated as silence and trimmed off. Default value is `0`. start\_threshold This indicates what sample value should be treated as silence. For digital audio, a value of `0` may be fine but for audio recorded from analog, you may wish to increase the value to account for background noise. Can be specified in dB (in case "dB" is appended to the specified value) or amplitude ratio. Default value is `0`. start\_silence Specify max duration of silence at beginning that will be kept after trimming. Default is 0, which is equal to trimming all samples detected as silence. start\_mode Specify mode of detection of silence end at start of multi-channel audio. Can be any or all. Default is any. With any, any sample from any channel that is detected as non-silence will trigger end of silence trimming at start of audio stream. With all, only if every sample from every channel is detected as non-silence will trigger end of silence trimming at start of audio stream, limited usage. stop\_periods Set the count for trimming silence from the end of audio. When specifying a positive value, it trims audio after it finds specified silence period. To remove silence from the middle of a file, specify a stop\_periods that is negative. This value is then treated as a positive value and is used to indicate the effect should restart processing as specified by stop\_periods, making it suitable for removing periods of silence in the middle of the audio. Default value is `0`. stop\_duration Specify a duration of silence that must exist before audio is not copied any more. By specifying a higher duration, silence that is wanted can be left in the audio. Default value is `0`. stop\_threshold This is the same as start\_threshold but for trimming silence from the end of audio. Can be specified in dB (in case "dB" is appended to the specified value) or amplitude ratio. Default value is `0`. stop\_silence Specify max duration of silence at end that will be kept after trimming. Default is 0, which is equal to trimming all samples detected as silence. stop\_mode Specify mode of detection of silence start after start of multi-channel audio. Can be any or all. Default is all. With any, any sample from any channel that is detected as silence will trigger start of silence trimming after start of audio stream, limited usage. With all, only if every sample from every channel is detected as silence will trigger start of silence trimming after start of audio stream. detection Set how is silence detected. avg Mean of absolute values of samples in moving window. rms Root squared mean of absolute values of samples in moving window. peak Maximum of absolute values of samples in moving window. median Median of absolute values of samples in moving window. ptp Absolute of max peak to min peak difference of samples in moving window. dev Standard deviation of values of samples in moving window. Default value is `rms`. window Set duration in number of seconds used to calculate size of window in number of samples for detecting silence. Using `0` will effectively disable any windowing and use only single sample per channel for silence detection. In that case it may be needed to also set start\_silence and/or stop\_silence to nonzero values with also start\_duration and/or stop\_duration to nonzero values. Default value is `0.02`. Allowed range is from `0` to `10`. timestamp Set processing mode of every audio frame output timestamp. write Full timestamps rewrite, keep only the start time for the first output frame. copy Non-dropped frames are left with same timestamp as input audio frame. Defaults value is `write`. #### 36.108.1 Examples * The following example shows how this filter can be used to start a recording that does not contain the delay at the start which usually occurs between pressing the record button and the start of the performance: silenceremove=start\_periods=1:start\_duration=5:start\_threshold=0.02 * Trim all silence encountered from beginning to end where there is more than 1 second of silence in audio: silenceremove=stop\_periods=-1:stop\_duration=1:stop\_threshold=-90dB * Trim all digital silence samples, using peak detection, from beginning to end where there is more than 0 samples of digital silence in audio and digital silence is detected in all channels at same positions in stream: silenceremove=window=0:detection=peak:stop\_mode=all:start\_mode=all:stop\_periods=-1:stop\_threshold=0 * Trim every 2nd encountered silence period from beginning to end where there is more than 1 second of silence per silence period in audio: silenceremove=stop\_periods=-2:stop\_duration=1:stop\_threshold=-90dB * Similar as above, but keep maximum of 0.5 seconds of silence from each trimmed period: silenceremove=stop\_periods=-2:stop\_duration=1:stop\_threshold=-90dB:stop\_silence=0.5 * Similar as above, but keep maximum of 1.5 seconds of silence from start of audio: silenceremove=stop\_periods=-2:stop\_duration=1:stop\_threshold=-90dB:stop\_silence=0.5:start\_periods=1:start\_duration=1:start\_silence=1.5:stop\_threshold=-90dB #### 36.108.2 Commands This filter supports some above options as commands. ### 36.109 sofalizer SOFAlizer uses head-related transfer functions (HRTFs) to create virtual loudspeakers around the user for binaural listening via headphones (audio formats up to 9 channels supported). The HRTFs are stored in SOFA files (see http://www.sofacoustics.org/ for a database). SOFAlizer is developed at the Acoustics Research Institute (ARI) of the Austrian Academy of Sciences. To enable compilation of this filter you need to configure FFmpeg with `--enable-libmysofa`. The filter accepts the following options: sofa Set the SOFA file used for rendering. gain Set gain applied to audio. Value is in dB. Default is 0. rotation Set rotation of virtual loudspeakers in deg. Default is 0. elevation Set elevation of virtual speakers in deg. Default is 0. radius Set distance in meters between loudspeakers and the listener with near-field HRTFs. Default is 1. type Set processing type. Can be time or freq. time is processing audio in time domain which is slow. freq is processing audio in frequency domain which is fast. Default is freq. speakers Set custom positions of virtual loudspeakers. Syntax for this option is: <CH> <AZIM> <ELEV>\[|<CH> <AZIM> <ELEV>|...\]. Each virtual loudspeaker is described with short channel name following with azimuth and elevation in degrees. Each virtual loudspeaker description is separated by ’|’. For example to override front left and front right channel positions use: ’speakers=FL 45 15|FR 345 15’. Descriptions with unrecognised channel names are ignored. lfegain Set custom gain for LFE channels. Value is in dB. Default is 0. framesize Set custom frame size in number of samples. Default is 1024. Allowed range is from 1024 to 96000. Only used if option ‘type’ is set to freq. normalize Should all IRs be normalized upon importing SOFA file. By default is enabled. interpolate Should nearest IRs be interpolated with neighbor IRs if exact position does not match. By default is disabled. minphase Minphase all IRs upon loading of SOFA file. By default is disabled. anglestep Set neighbor search angle step. Only used if option interpolate is enabled. radstep Set neighbor search radius step. Only used if option interpolate is enabled. #### 36.109.1 Examples * Using ClubFritz6 sofa file: sofalizer=sofa=/path/to/ClubFritz6.sofa:type=freq:radius=1 * Using ClubFritz12 sofa file and bigger radius with small rotation: sofalizer=sofa=/path/to/ClubFritz12.sofa:type=freq:radius=2:rotation=5 * Similar as above but with custom speaker positions for front left, front right, back left and back right and also with custom gain: "sofalizer=sofa=/path/to/ClubFritz6.sofa:type=freq:radius=2:speakers=FL 45|FR 315|BL 135|BR 225:gain=28" ### 36.110 speechnorm Speech Normalizer. This filter expands or compresses each half-cycle of audio samples (local set of samples all above or all below zero and between two nearest zero crossings) depending on threshold value, so audio reaches target peak value under conditions controlled by below options. The filter accepts the following options: peak, p Set the expansion target peak value. This specifies the highest allowed absolute amplitude level for the normalized audio input. Default value is 0.95. Allowed range is from 0.0 to 1.0. expansion, e Set the maximum expansion factor. Allowed range is from 1.0 to 50.0. Default value is 2.0. This option controls maximum local half-cycle of samples expansion. The maximum expansion would be such that local peak value reaches target peak value but never to surpass it and that ratio between new and previous peak value does not surpass this option value. compression, c Set the maximum compression factor. Allowed range is from 1.0 to 50.0. Default value is 2.0. This option controls maximum local half-cycle of samples compression. This option is used only if threshold option is set to value greater than 0.0, then in such cases when local peak is lower or same as value set by threshold all samples belonging to that peak’s half-cycle will be compressed by current compression factor. threshold, t Set the threshold value. Default value is 0.0. Allowed range is from 0.0 to 1.0. This option specifies which half-cycles of samples will be compressed and which will be expanded. Any half-cycle samples with their local peak value below or same as this option value will be compressed by current compression factor, otherwise, if greater than threshold value they will be expanded with expansion factor so that it could reach peak target value but never surpass it. raise, r Set the expansion raising amount per each half-cycle of samples. Default value is 0.001. Allowed range is from 0.0 to 1.0. This controls how fast expansion factor is raised per each new half-cycle until it reaches expansion value. Setting this options too high may lead to distortions. fall, f Set the compression raising amount per each half-cycle of samples. Default value is 0.001. Allowed range is from 0.0 to 1.0. This controls how fast compression factor is raised per each new half-cycle until it reaches compression value. channels, h Specify which channels to filter, by default all available channels are filtered. invert, i Enable inverted filtering, by default is disabled. This inverts interpretation of threshold option. When enabled any half-cycle of samples with their local peak value below or same as threshold option will be expanded otherwise it will be compressed. link, l Link channels when calculating gain applied to each filtered channel sample, by default is disabled. When disabled each filtered channel gain calculation is independent, otherwise when this option is enabled the minimum of all possible gains for each filtered channel is used. rms, m Set the expansion target RMS value. This specifies the highest allowed RMS level for the normalized audio input. Default value is 0.0, thus disabled. Allowed range is from 0.0 to 1.0. #### 36.110.1 Commands This filter supports the all above options as commands. #### 36.110.2 Examples * Weak and slow amplification: speechnorm=e=3:r=0.00001:l=1 * Moderate and slow amplification: speechnorm=e=6.25:r=0.00001:l=1 * Strong and fast amplification: speechnorm=e=12.5:r=0.0001:l=1 * Very strong and fast amplification: speechnorm=e=25:r=0.0001:l=1 * Extreme and fast amplification: speechnorm=e=50:r=0.0001:l=1 ### 36.111 stereotools This filter has some handy utilities to manage stereo signals, for converting M/S stereo recordings to L/R signal while having control over the parameters or spreading the stereo image of master track. The filter accepts the following options: level\_in Set input level before filtering for both channels. Defaults is 1. Allowed range is from 0.015625 to 64. level\_out Set output level after filtering for both channels. Defaults is 1. Allowed range is from 0.015625 to 64. balance\_in Set input balance between both channels. Default is 0. Allowed range is from -1 to 1. balance\_out Set output balance between both channels. Default is 0. Allowed range is from -1 to 1. softclip Enable softclipping. Results in analog distortion instead of harsh digital 0dB clipping. Disabled by default. mutel Mute the left channel. Disabled by default. muter Mute the right channel. Disabled by default. phasel Change the phase of the left channel. Disabled by default. phaser Change the phase of the right channel. Disabled by default. mode Set stereo mode. Available values are: ‘lr>lr’ Left/Right to Left/Right, this is default. ‘lr>ms’ Left/Right to Mid/Side. ‘ms>lr’ Mid/Side to Left/Right. ‘lr>ll’ Left/Right to Left/Left. ‘lr>rr’ Left/Right to Right/Right. ‘lr>l+r’ Left/Right to Left + Right. ‘lr>rl’ Left/Right to Right/Left. ‘ms>ll’ Mid/Side to Left/Left. ‘ms>rr’ Mid/Side to Right/Right. ‘ms>rl’ Mid/Side to Right/Left. ‘lr>l-r’ Left/Right to Left - Right. slev Set level of side signal. Default is 1. Allowed range is from 0.015625 to 64. sbal Set balance of side signal. Default is 0. Allowed range is from -1 to 1. mlev Set level of the middle signal. Default is 1. Allowed range is from 0.015625 to 64. mpan Set middle signal pan. Default is 0. Allowed range is from -1 to 1. base Set stereo base between mono and inversed channels. Default is 0. Allowed range is from -1 to 1. delay Set delay in milliseconds how much to delay left from right channel and vice versa. Default is 0. Allowed range is from -20 to 20. sclevel Set S/C level. Default is 1. Allowed range is from 1 to 100. phase Set the stereo phase in degrees. Default is 0. Allowed range is from 0 to 360. bmode\_in, bmode\_out Set balance mode for balance\_in/balance\_out option. Can be one of the following: ‘balance’ Classic balance mode. Attenuate one channel at time. Gain is raised up to 1. ‘amplitude’ Similar as classic mode above but gain is raised up to 2. ‘power’ Equal power distribution, from -6dB to +6dB range. #### 36.111.1 Commands This filter supports the all above options as commands. #### 36.111.2 Examples * Apply karaoke like effect: stereotools=mlev=0.015625 * Convert M/S signal to L/R: "stereotools=mode=ms>lr" ### 36.112 stereowiden This filter enhance the stereo effect by suppressing signal common to both channels and by delaying the signal of left into right and vice versa, thereby widening the stereo effect. The filter accepts the following options: delay Time in milliseconds of the delay of left signal into right and vice versa. Default is 20 milliseconds. feedback Amount of gain in delayed signal into right and vice versa. Gives a delay effect of left signal in right output and vice versa which gives widening effect. Default is 0.3. crossfeed Cross feed of left into right with inverted phase. This helps in suppressing the mono. If the value is 1 it will cancel all the signal common to both channels. Default is 0.3. drymix Set level of input signal of original channel. Default is 0.8. #### 36.112.1 Commands This filter supports the all above options except `delay` as commands. ### 36.113 superequalizer Apply 18 band equalizer. The filter accepts the following options: 1b Set 65Hz band gain. 2b Set 92Hz band gain. 3b Set 131Hz band gain. 4b Set 185Hz band gain. 5b Set 262Hz band gain. 6b Set 370Hz band gain. 7b Set 523Hz band gain. 8b Set 740Hz band gain. 9b Set 1047Hz band gain. 10b Set 1480Hz band gain. 11b Set 2093Hz band gain. 12b Set 2960Hz band gain. 13b Set 4186Hz band gain. 14b Set 5920Hz band gain. 15b Set 8372Hz band gain. 16b Set 11840Hz band gain. 17b Set 16744Hz band gain. 18b Set 20000Hz band gain. ### 36.114 surround Apply audio surround upmix filter. This filter allows to produce multichannel output from audio stream. The filter accepts the following options: chl\_out Set output channel layout. By default, this is 5.1. See (ffmpeg-utils)the Channel Layout section in the ffmpeg-utils(1) manual for the required syntax. chl\_in Set input channel layout. By default, this is stereo. See (ffmpeg-utils)the Channel Layout section in the ffmpeg-utils(1) manual for the required syntax. level\_in Set input volume level. By default, this is 1. level\_out Set output volume level. By default, this is 1. lfe Enable LFE channel output if output channel layout has it. By default, this is enabled. lfe\_low Set LFE low cut off frequency. By default, this is 128 Hz. lfe\_high Set LFE high cut off frequency. By default, this is 256 Hz. lfe\_mode Set LFE mode, can be add or sub. Default is add. In add mode, LFE channel is created from input audio and added to output. In sub mode, LFE channel is created from input audio and added to output but also all non-LFE output channels are subtracted with output LFE channel. smooth Set temporal smoothness strength, used to gradually change factors when transforming stereo sound in time. Allowed range is from 0.0 to 1.0. Useful to improve output quality with focus option values greater than 0.0. Default is 0.0. Only values inside this range and without edges are effective. angle Set angle of stereo surround transform, Allowed range is from 0 to 360. Default is 90. focus Set focus of stereo surround transform, Allowed range is from \-1 to 1. Default is 0. fc\_in Set front center input volume. By default, this is 1. fc\_out Set front center output volume. By default, this is 1. fl\_in Set front left input volume. By default, this is 1. fl\_out Set front left output volume. By default, this is 1. fr\_in Set front right input volume. By default, this is 1. fr\_out Set front right output volume. By default, this is 1. sl\_in Set side left input volume. By default, this is 1. sl\_out Set side left output volume. By default, this is 1. sr\_in Set side right input volume. By default, this is 1. sr\_out Set side right output volume. By default, this is 1. bl\_in Set back left input volume. By default, this is 1. bl\_out Set back left output volume. By default, this is 1. br\_in Set back right input volume. By default, this is 1. br\_out Set back right output volume. By default, this is 1. bc\_in Set back center input volume. By default, this is 1. bc\_out Set back center output volume. By default, this is 1. lfe\_in Set LFE input volume. By default, this is 1. lfe\_out Set LFE output volume. By default, this is 1. allx Set spread usage of stereo image across X axis for all channels. Allowed range is from \-1 to 15. By default this value is negative \-1, and thus unused. ally Set spread usage of stereo image across Y axis for all channels. Allowed range is from \-1 to 15. By default this value is negative \-1, and thus unused. fcx, flx, frx, blx, brx, slx, srx, bcx Set spread usage of stereo image across X axis for each channel. Allowed range is from 0.06 to 15. By default this value is 0.5. fcy, fly, fry, bly, bry, sly, sry, bcy Set spread usage of stereo image across Y axis for each channel. Allowed range is from 0.06 to 15. By default this value is 0.5. win\_size Set window size. Allowed range is from 1024 to 65536. Default size is 4096. win\_func Set window function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hann, hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default is `hann`. overlap Set window overlap. If set to 1, the recommended overlap for selected window function will be picked. Default is `0.5`. ### 36.115 tiltshelf Boost or cut the lower frequencies and cut or boost higher frequencies of the audio using a two-pole shelving filter with a response similar to that of a standard hi-fi’s tone-controls. This is also known as shelving equalisation (EQ). The filter accepts the following options: gain, g Give the gain at 0 Hz. Its useful range is about -20 (for a large cut) to +20 (for a large boost). Beware of clipping when using a positive gain. frequency, f Set the filter’s central frequency and so can be used to extend or reduce the frequency range to be boosted or cut. The default value is `3000` Hz. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Determine how steep is the filter’s shelf transition. poles, p Set number of poles. Default is 2. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.115.1 Commands This filter supports some options as commands. ### 36.116 treble, highshelf Boost or cut treble (upper) frequencies of the audio using a two-pole shelving filter with a response similar to that of a standard hi-fi’s tone-controls. This is also known as shelving equalisation (EQ). The filter accepts the following options: gain, g Give the gain at whichever is the lower of ~22 kHz and the Nyquist frequency. Its useful range is about -20 (for a large cut) to +20 (for a large boost). Beware of clipping when using a positive gain. frequency, f Set the filter’s central frequency and so can be used to extend or reduce the frequency range to be boosted or cut. The default value is `3000` Hz. width\_type, t Set method to specify band-width of filter. h Hz q Q-Factor o octave s slope k kHz width, w Determine how steep is the filter’s shelf transition. poles, p Set number of poles. Default is 2. mix, m How much to use filtered signal in output. Default is 1. Range is between 0 and 1. channels, c Specify which channels to filter, by default all available are filtered. normalize, n Normalize biquad coefficients, by default is disabled. Enabling it will normalize magnitude response at DC to 0dB. transform, a Set transform type of IIR filter. di dii tdi tdii latt svf zdf precision, r Set precision of filtering. auto Pick automatic sample format depending on surround filters. s16 Always use signed 16-bit. s32 Always use signed 32-bit. f32 Always use float 32-bit. f64 Always use float 64-bit. block\_size, b Set block size used for reverse IIR processing. If this value is set to high enough value (higher than impulse response length truncated when reaches near zero values) filtering will become linear phase otherwise if not big enough it will just produce nasty artifacts. Note that filter delay will be exactly this many samples when set to non-zero value. #### 36.116.1 Commands This filter supports the following commands: frequency, f Change treble frequency. Syntax for the command is : "frequency" width\_type, t Change treble width\_type. Syntax for the command is : "width\_type" width, w Change treble width. Syntax for the command is : "width" gain, g Change treble gain. Syntax for the command is : "gain" mix, m Change treble mix. Syntax for the command is : "mix" ### 36.117 tremolo Sinusoidal amplitude modulation. The filter accepts the following options: f Modulation frequency in Hertz. Modulation frequencies in the subharmonic range (20 Hz or lower) will result in a tremolo effect. This filter may also be used as a ring modulator by specifying a modulation frequency higher than 20 Hz. Range is 0.1 - 20000.0. Default value is 5.0 Hz. d Depth of modulation as a percentage. Range is 0.0 - 1.0. Default value is 0.5. ### 36.118 vibrato Sinusoidal phase modulation. The filter accepts the following options: f Modulation frequency in Hertz. Range is 0.1 - 20000.0. Default value is 5.0 Hz. d Depth of modulation as a percentage. Range is 0.0 - 1.0. Default value is 0.5. ### 36.119 virtualbass Apply audio Virtual Bass filter. This filter accepts stereo input and produce stereo with LFE (2.1) channels output. The newly produced LFE channel have enhanced virtual bass originally obtained from both stereo channels. This filter outputs front left and front right channels unchanged as available in stereo input. The filter accepts the following options: cutoff Set the virtual bass cutoff frequency. Default value is 250 Hz. Allowed range is from 100 to 500 Hz. strength Set the virtual bass strength. Allowed range is from 0.5 to 3. Default value is 3. ### 36.120 volume Adjust the input audio volume. It accepts the following parameters: volume Set audio volume expression. Output values are clipped to the maximum value. The output audio volume is given by the relation: output\_volume = volume \* input\_volume The default value for volume is "1.0". precision This parameter represents the mathematical precision. It determines which input sample formats will be allowed, which affects the precision of the volume scaling. fixed 8-bit fixed-point; this limits input sample format to U8, S16, and S32. float 32-bit floating-point; this limits input sample format to FLT. (default) double 64-bit floating-point; this limits input sample format to DBL. replaygain Choose the behaviour on encountering ReplayGain side data in input frames. drop Remove ReplayGain side data, ignoring its contents (the default). ignore Ignore ReplayGain side data, but leave it in the frame. track Prefer the track gain, if present. album Prefer the album gain, if present. replaygain\_preamp Pre-amplification gain in dB to apply to the selected replaygain gain. Default value for replaygain\_preamp is 0.0. replaygain\_noclip Prevent clipping by limiting the gain applied. Default value for replaygain\_noclip is 1. eval Set when the volume expression is evaluated. It accepts the following values: ‘once’ only evaluate expression once during the filter initialization, or when the ‘volume’ command is sent ‘frame’ evaluate expression for each incoming frame Default value is ‘once’. The volume expression can contain the following parameters. n frame number (starting at zero) nb\_channels number of channels nb\_consumed\_samples number of samples consumed by the filter nb\_samples number of samples in the current frame pos original frame position in the file; deprecated, do not use pts frame PTS sample\_rate sample rate startpts PTS at start of stream startt time at start of stream t frame time tb timestamp timebase volume last set volume value Note that when eval is set to ‘once’ only the sample\_rate and tb variables are available, all other variables will evaluate to NAN. #### 36.120.1 Commands This filter supports the following commands: volume Modify the volume expression. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. #### 36.120.2 Examples * Halve the input audio volume: volume=volume=0.5 volume=volume=1/2 volume=volume=-6.0206dB In all the above example the named key for volume can be omitted, for example like in: volume=0.5 * Increase input audio power by 6 decibels using fixed-point precision: volume=volume=6dB:precision=fixed * Fade volume after time 10 with an annihilation period of 5 seconds: volume='if(lt(t,10),1,max(1-(t-10)/5,0))':eval=frame ### 36.121 volumedetect Detect the volume of the input video. The filter has no parameters. It supports only 16-bit signed integer samples, so the input will be converted when needed. Statistics about the volume will be printed in the log when the input stream end is reached. In particular it will show the mean volume (root mean square), maximum volume (on a per-sample basis), and the beginning of a histogram of the registered volume values (from the maximum value to a cumulated 1/1000 of the samples). All volumes are in decibels relative to the maximum PCM value. #### 36.121.1 Examples Here is an excerpt of the output: \[Parsed\_volumedetect\_0 0xa23120\] mean\_volume: -27 dB \[Parsed\_volumedetect\_0 0xa23120\] max\_volume: -4 dB \[Parsed\_volumedetect\_0 0xa23120\] histogram\_4db: 6 \[Parsed\_volumedetect\_0 0xa23120\] histogram\_5db: 62 \[Parsed\_volumedetect\_0 0xa23120\] histogram\_6db: 286 \[Parsed\_volumedetect\_0 0xa23120\] histogram\_7db: 1042 \[Parsed\_volumedetect\_0 0xa23120\] histogram\_8db: 2551 \[Parsed\_volumedetect\_0 0xa23120\] histogram\_9db: 4609 \[Parsed\_volumedetect\_0 0xa23120\] histogram\_10db: 8409 It means that: * The mean square energy is approximately -27 dB, or 10^-2.7. * The largest sample is at -4 dB, or more precisely between -4 dB and -5 dB. * There are 6 samples at -4 dB, 62 at -5 dB, 286 at -6 dB, etc. In other words, raising the volume by +4 dB does not cause any clipping, raising it by +5 dB causes clipping for 6 samples, etc. ## 37 Audio Sources Below is a description of the currently available audio sources. ### 37.1 abuffer Buffer audio frames, and make them available to the filter chain. This source is mainly intended for a programmatic use, in particular through the interface defined in libavfilter/buffersrc.h. It accepts the following parameters: time\_base The timebase which will be used for timestamps of submitted frames. It must be either a floating-point number or in numerator/denominator form. sample\_rate The sample rate of the incoming audio buffers. sample\_fmt The sample format of the incoming audio buffers. Either a sample format name or its corresponding integer representation from the enum AVSampleFormat in libavutil/samplefmt.h channel\_layout The channel layout of the incoming audio buffers. Either a channel layout name from channel\_layout\_map in libavutil/channel\_layout.c or its corresponding integer representation from the AV\_CH\_LAYOUT\_\* macros in libavutil/channel\_layout.h channels The number of channels of the incoming audio buffers. If both channels and channel\_layout are specified, then they must be consistent. #### 37.1.1 Examples abuffer=sample\_rate=44100:sample\_fmt=s16p:channel\_layout=stereo will instruct the source to accept planar 16bit signed stereo at 44100Hz. Since the sample format with name "s16p" corresponds to the number 6 and the "stereo" channel layout corresponds to the value 0x3, this is equivalent to: abuffer=sample\_rate=44100:sample\_fmt=6:channel\_layout=0x3 ### 37.2 aevalsrc Generate an audio signal specified by an expression. This source accepts in input one or more expressions (one for each channel), which are evaluated and used to generate a corresponding audio signal. This source accepts the following options: exprs Set the ’|’-separated expressions list for each separate channel. In case the channel\_layout option is not specified, the selected channel layout depends on the number of provided expressions. Otherwise the last specified expression is applied to the remaining output channels. channel\_layout, c Set the channel layout. The number of channels in the specified layout must be equal to the number of specified expressions. duration, d Set the minimum duration of the sourced audio. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. Note that the resulting duration may be greater than the specified duration, as the generated audio is always cut at the end of a complete frame. If not specified, or the expressed duration is negative, the audio is supposed to be generated forever. nb\_samples, n Set the number of samples per channel per each output frame, default to 1024. sample\_rate, s Specify the sample rate, default to 44100. Each expression in exprs can contain the following constants: n number of the evaluated sample, starting from 0 t time of the evaluated sample expressed in seconds, starting from 0 s sample rate #### 37.2.1 Examples * Generate silence: aevalsrc=0 * Generate a sin signal with frequency of 440 Hz, set sample rate to 8000 Hz: aevalsrc="sin(440\*2\*PI\*t):s=8000" * Generate a two channels signal, specify the channel layout (Front Center + Back Center) explicitly: aevalsrc="sin(420\*2\*PI\*t)|cos(430\*2\*PI\*t):c=FC|BC" * Generate white noise: aevalsrc="-2+random(0)" * Generate an amplitude modulated signal: aevalsrc="sin(10\*2\*PI\*t)\*sin(880\*2\*PI\*t)" * Generate 2.5 Hz binaural beats on a 360 Hz carrier: aevalsrc="0.1\*sin(2\*PI\*(360-2.5/2)\*t) | 0.1\*sin(2\*PI\*(360+2.5/2)\*t)" ### 37.3 afdelaysrc Generate a fractional delay FIR coefficients. The resulting stream can be used with afir filter for filtering the audio signal. The filter accepts the following options: delay, d Set the fractional delay. Default is 0. sample\_rate, r Set the sample rate, default is 44100. nb\_samples, n Set the number of samples per each frame. Default is 1024. taps, t Set the number of filter coefficients in output audio stream. Default value is 0. channel\_layout, c Specifies the channel layout, and can be a string representing a channel layout. The default value of channel\_layout is "stereo". ### 37.4 afireqsrc Generate a FIR equalizer coefficients. The resulting stream can be used with afir filter for filtering the audio signal. The filter accepts the following options: preset, p Set equalizer preset. Default preset is `flat`. Available presets are: ‘custom’ ‘flat’ ‘acoustic’ ‘bass’ ‘beats’ ‘classic’ ‘clear’ ‘deep bass’ ‘dubstep’ ‘electronic’ ‘hard-style’ ‘hip-hop’ ‘jazz’ ‘metal’ ‘movie’ ‘pop’ ‘r&b’ ‘rock’ ‘vocal booster’ gains, g Set custom gains for each band. Only used if the preset option is set to `custom`. Gains are separated by white spaces and each gain is set in dBFS. Default is `0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0`. bands, b Set the custom bands from where custon equalizer gains are set. This must be in strictly increasing order. Only used if the preset option is set to `custom`. Bands are separated by white spaces and each band represent frequency in Hz. Default is `25 40 63 100 160 250 400 630 1000 1600 2500 4000 6300 10000 16000 24000`. taps, t Set number of filter coefficients in output audio stream. Default value is `4096`. sample\_rate, r Set sample rate of output audio stream, default is `44100`. nb\_samples, n Set number of samples per each frame in output audio stream. Default is `1024`. interp, i Set interpolation method for FIR equalizer coefficients. Can be `linear` or `cubic`. phase, h Set phase type of FIR filter. Can be `linear` or `min`: minimum-phase. Default is minimum-phase filter. ### 37.5 afirsrc Generate a FIR coefficients using frequency sampling method. The resulting stream can be used with afir filter for filtering the audio signal. The filter accepts the following options: taps, t Set number of filter coefficients in output audio stream. Default value is 1025. frequency, f Set frequency points from where magnitude and phase are set. This must be in non decreasing order, and first element must be 0, while last element must be 1. Elements are separated by white spaces. magnitude, m Set magnitude value for every frequency point set by frequency. Number of values must be same as number of frequency points. Values are separated by white spaces. phase, p Set phase value for every frequency point set by frequency. Number of values must be same as number of frequency points. Values are separated by white spaces. sample\_rate, r Set sample rate, default is 44100. nb\_samples, n Set number of samples per each frame. Default is 1024. win\_func, w Set window function. Default is blackman. ### 37.6 anullsrc The null audio source, return unprocessed audio frames. It is mainly useful as a template and to be employed in analysis / debugging tools, or as the source for filters which ignore the input data (for example the sox synth filter). This source accepts the following options: channel\_layout, cl Specifies the channel layout, and can be either an integer or a string representing a channel layout. The default value of channel\_layout is "stereo". Check the channel\_layout\_map definition in libavutil/channel\_layout.c for the mapping between strings and channel layout values. sample\_rate, r Specifies the sample rate, and defaults to 44100. nb\_samples, n Set the number of samples per requested frames. duration, d Set the duration of the sourced audio. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If not specified, or the expressed duration is negative, the audio is supposed to be generated forever. #### 37.6.1 Examples * Set the sample rate to 48000 Hz and the channel layout to AV\_CH\_LAYOUT\_MONO. anullsrc=r=48000:cl=4 * Do the same operation with a more obvious syntax: anullsrc=r=48000:cl=mono All the parameters need to be explicitly defined. ### 37.7 flite Synthesize a voice utterance using the libflite library. To enable compilation of this filter you need to configure FFmpeg with `--enable-libflite`. Note that versions of the flite library prior to 2.0 are not thread-safe. The filter accepts the following options: list\_voices If set to 1, list the names of the available voices and exit immediately. Default value is 0. nb\_samples, n Set the maximum number of samples per frame. Default value is 512. textfile Set the filename containing the text to speak. text Set the text to speak. voice, v Set the voice to use for the speech synthesis. Default value is `kal`. See also the list\_voices option. #### 37.7.1 Examples * Read from file speech.txt, and synthesize the text using the standard flite voice: flite=textfile=speech.txt * Read the specified text selecting the `slt` voice: flite=text='So fare thee well, poor devil of a Sub-Sub, whose commentator I am':voice=slt * Input text to ffmpeg: ffmpeg -f lavfi -i flite=text='So fare thee well, poor devil of a Sub-Sub, whose commentator I am':voice=slt * Make ffplay speak the specified text, using `flite` and the `lavfi` device: ffplay -f lavfi flite=text='No more be grieved for which that thou hast done.' For more information about libflite, check: http://www.festvox.org/flite/ ### 37.8 anoisesrc Generate a noise audio signal. The filter accepts the following options: sample\_rate, r Specify the sample rate. Default value is 48000 Hz. amplitude, a Specify the amplitude (0.0 - 1.0) of the generated audio stream. Default value is 1.0. duration, d Specify the duration of the generated audio stream. Not specifying this option results in noise with an infinite length. color, colour, c Specify the color of noise. Available noise colors are white, pink, brown, blue, violet and velvet. Default color is white. seed, s Specify a value used to seed the PRNG. nb\_samples, n Set the number of samples per each output frame, default is 1024. density Set the density (0.0 - 1.0) for the velvet noise generator, default is 0.05. #### 37.8.1 Examples * Generate 60 seconds of pink noise, with a 44.1 kHz sampling rate and an amplitude of 0.5: anoisesrc=d=60:c=pink:r=44100:a=0.5 ### 37.9 hilbert Generate odd-tap Hilbert transform FIR coefficients. The resulting stream can be used with afir filter for phase-shifting the signal by 90 degrees. This is used in many matrix coding schemes and for analytic signal generation. The process is often written as a multiplication by i (or j), the imaginary unit. The filter accepts the following options: sample\_rate, s Set sample rate, default is 44100. taps, t Set length of FIR filter, default is 22051. nb\_samples, n Set number of samples per each frame. win\_func, w Set window function to be used when generating FIR coefficients. ### 37.10 sinc Generate a sinc kaiser-windowed low-pass, high-pass, band-pass, or band-reject FIR coefficients. The resulting stream can be used with afir filter for filtering the audio signal. The filter accepts the following options: sample\_rate, r Set sample rate, default is 44100. nb\_samples, n Set number of samples per each frame. Default is 1024. hp Set high-pass frequency. Default is 0. lp Set low-pass frequency. Default is 0. If high-pass frequency is lower than low-pass frequency and low-pass frequency is higher than 0 then filter will create band-pass filter coefficients, otherwise band-reject filter coefficients. phase Set filter phase response. Default is 50. Allowed range is from 0 to 100. beta Set Kaiser window beta. att Set stop-band attenuation. Default is 120dB, allowed range is from 40 to 180 dB. round Enable rounding, by default is disabled. hptaps Set number of taps for high-pass filter. lptaps Set number of taps for low-pass filter. ### 37.11 sine Generate an audio signal made of a sine wave with amplitude 1/8. The audio signal is bit-exact. The filter accepts the following options: frequency, f Set the carrier frequency. Default is 440 Hz. beep\_factor, b Enable a periodic beep every second with frequency beep\_factor times the carrier frequency. Default is 0, meaning the beep is disabled. sample\_rate, r Specify the sample rate, default is 44100. duration, d Specify the duration of the generated audio stream. samples\_per\_frame Set the number of samples per output frame. The expression can contain the following constants: n The (sequential) number of the output audio frame, starting from 0. pts The PTS (Presentation TimeStamp) of the output audio frame, expressed in TB units. t The PTS of the output audio frame, expressed in seconds. TB The timebase of the output audio frames. Default is `1024`. #### 37.11.1 Examples * Generate a simple 440 Hz sine wave: sine * Generate a 220 Hz sine wave with a 880 Hz beep each second, for 5 seconds: sine=220:4:d=5 sine=f=220:b=4:d=5 sine=frequency=220:beep\_factor=4:duration=5 * Generate a 1 kHz sine wave following `1602,1601,1602,1601,1602` NTSC pattern: sine=1000:samples\_per\_frame='st(0,mod(n,5)); 1602-not(not(eq(ld(0),1)+eq(ld(0),3)))' ## 38 Audio Sinks Below is a description of the currently available audio sinks. ### 38.1 abuffersink Buffer audio frames, and make them available to the end of filter chain. This sink is mainly intended for programmatic use, in particular through the interface defined in libavfilter/buffersink.h or the options system. It accepts a pointer to an AVABufferSinkContext structure, which defines the incoming buffers’ formats, to be passed as the opaque parameter to `avfilter_init_filter` for initialization. ### 38.2 anullsink Null audio sink; do absolutely nothing with the input audio. It is mainly useful as a template and for use in analysis / debugging tools. ## 39 Video Filters When you configure your FFmpeg build, you can disable any of the existing filters using `--disable-filters`. The configure output will show the video filters included in your build. Below is a description of the currently available video filters. ### 39.1 addroi Mark a region of interest in a video frame. The frame data is passed through unchanged, but metadata is attached to the frame indicating regions of interest which can affect the behaviour of later encoding. Multiple regions can be marked by applying the filter multiple times. x Region distance in pixels from the left edge of the frame. y Region distance in pixels from the top edge of the frame. w Region width in pixels. h Region height in pixels. The parameters x, y, w and h are expressions, and may contain the following variables: iw Width of the input frame. ih Height of the input frame. qoffset Quantisation offset to apply within the region. This must be a real value in the range -1 to +1. A value of zero indicates no quality change. A negative value asks for better quality (less quantisation), while a positive value asks for worse quality (greater quantisation). The range is calibrated so that the extreme values indicate the largest possible offset - if the rest of the frame is encoded with the worst possible quality, an offset of -1 indicates that this region should be encoded with the best possible quality anyway. Intermediate values are then interpolated in some codec-dependent way. For example, in 10-bit H.264 the quantisation parameter varies between -12 and 51. A typical qoffset value of -1/10 therefore indicates that this region should be encoded with a QP around one-tenth of the full range better than the rest of the frame. So, if most of the frame were to be encoded with a QP of around 30, this region would get a QP of around 24 (an offset of approximately -1/10 \* (51 - -12) = -6.3). An extreme value of -1 would indicate that this region should be encoded with the best possible quality regardless of the treatment of the rest of the frame - that is, should be encoded at a QP of -12. clear If set to true, remove any existing regions of interest marked on the frame before adding the new one. #### 39.1.1 Examples * Mark the centre quarter of the frame as interesting. addroi=iw/4:ih/4:iw/2:ih/2:-1/10 * Mark the 100-pixel-wide region on the left edge of the frame as very uninteresting (to be encoded at much lower quality than the rest of the frame). addroi=0:0:100:ih:+1/5 ### 39.2 alphaextract Extract the alpha component from the input as a grayscale video. This is especially useful with the alphamerge filter. ### 39.3 alphamerge Add or replace the alpha component of the primary input with the grayscale value of a second input. This is intended for use with alphaextract to allow the transmission or storage of frame sequences that have alpha in a format that doesn’t support an alpha channel. For example, to reconstruct full frames from a normal YUV-encoded video and a separate video created with alphaextract, you might use: movie=in\_alpha.mkv \[alpha\]; \[in\]\[alpha\] alphamerge \[out\] ### 39.4 amplify Amplify differences between current pixel and pixels of adjacent frames in same pixel location. This filter accepts the following options: radius Set frame radius. Default is 2. Allowed range is from 1 to 63. For example radius of 3 will instruct filter to calculate average of 7 frames. factor Set factor to amplify difference. Default is 2. Allowed range is from 0 to 65535. threshold Set threshold for difference amplification. Any difference greater or equal to this value will not alter source pixel. Default is 10. Allowed range is from 0 to 65535. tolerance Set tolerance for difference amplification. Any difference lower to this value will not alter source pixel. Default is 0. Allowed range is from 0 to 65535. low Set lower limit for changing source pixel. Default is 65535. Allowed range is from 0 to 65535. This option controls maximum possible value that will decrease source pixel value. high Set high limit for changing source pixel. Default is 65535. Allowed range is from 0 to 65535. This option controls maximum possible value that will increase source pixel value. planes Set which planes to filter. Default is all. Allowed range is from 0 to 15. #### 39.4.1 Commands This filter supports the following commands that corresponds to option of same name: factor threshold tolerance low high planes ### 39.5 ass Same as the subtitles filter, except that it doesn’t require libavcodec and libavformat to work. On the other hand, it is limited to ASS (Advanced Substation Alpha) subtitles files. This filter accepts the following option in addition to the common options from the subtitles filter: shaping Set the shaping engine Available values are: ‘auto’ The default libass shaping engine, which is the best available. ‘simple’ Fast, font-agnostic shaper that can do only substitutions ‘complex’ Slower shaper using OpenType for substitutions and positioning The default is `auto`. ### 39.6 atadenoise Apply an Adaptive Temporal Averaging Denoiser to the video input. The filter accepts the following options: 0a Set threshold A for 1st plane. Default is 0.02. Valid range is 0 to 0.3. 0b Set threshold B for 1st plane. Default is 0.04. Valid range is 0 to 5. 1a Set threshold A for 2nd plane. Default is 0.02. Valid range is 0 to 0.3. 1b Set threshold B for 2nd plane. Default is 0.04. Valid range is 0 to 5. 2a Set threshold A for 3rd plane. Default is 0.02. Valid range is 0 to 0.3. 2b Set threshold B for 3rd plane. Default is 0.04. Valid range is 0 to 5. Threshold A is designed to react on abrupt changes in the input signal and threshold B is designed to react on continuous changes in the input signal. s Set number of frames filter will use for averaging. Default is 9. Must be odd number in range \[5, 129\]. p Set what planes of frame filter will use for averaging. Default is all. a Set what variant of algorithm filter will use for averaging. Default is `p` parallel. Alternatively can be set to `s` serial. Parallel can be faster then serial, while other way around is never true. Parallel will abort early on first change being greater then thresholds, while serial will continue processing other side of frames if they are equal or below thresholds. 0s 1s 2s Set sigma for 1st plane, 2nd plane or 3rd plane. Default is 32767. Valid range is from 0 to 32767. This options controls weight for each pixel in radius defined by size. Default value means every pixel have same weight. Setting this option to 0 effectively disables filtering. #### 39.6.1 Commands This filter supports same commands as options except option `s`. The command accepts the same syntax of the corresponding option. ### 39.7 avgblur Apply average blur filter. The filter accepts the following options: sizeX Set horizontal radius size. planes Set which planes to filter. By default all planes are filtered. sizeY Set vertical radius size, if zero it will be same as `sizeX`. Default is `0`. #### 39.7.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.8 backgroundkey Turns a static background into transparency. The filter accepts the following option: threshold Threshold for scene change detection. similarity Similarity percentage with the background. blend Set the blend amount for pixels that are not similar. #### 39.8.1 Commands This filter supports the all above options as commands. ### 39.9 bbox Compute the bounding box for the non-black pixels in the input frame luma plane. This filter computes the bounding box containing all the pixels with a luma value greater than the minimum allowed value. The parameters describing the bounding box are printed on the filter log. The filter accepts the following option: min\_val Set the minimal luma value. Default is `16`. #### 39.9.1 Commands This filter supports the all above options as commands. ### 39.10 bilateral Apply bilateral filter, spatial smoothing while preserving edges. The filter accepts the following options: sigmaS Set sigma of gaussian function to calculate spatial weight. Allowed range is 0 to 512. Default is 0.1. sigmaR Set sigma of gaussian function to calculate range weight. Allowed range is 0 to 1. Default is 0.1. planes Set planes to filter. Default is first only. #### 39.10.1 Commands This filter supports the all above options as commands. ### 39.11 bitplanenoise Show and measure bit plane noise. The filter accepts the following options: bitplane Set which plane to analyze. Default is `1`. filter Filter out noisy pixels from `bitplane` set above. Default is disabled. ### 39.12 blackdetect Detect video intervals that are (almost) completely black. Can be useful to detect chapter transitions, commercials, or invalid recordings. The filter outputs its detection analysis to both the log as well as frame metadata. If a black segment of at least the specified minimum duration is found, a line with the start and end timestamps as well as duration is printed to the log with level `info`. In addition, a log line with level `debug` is printed per frame showing the black amount detected for that frame. The filter also attaches metadata to the first frame of a black segment with key `lavfi.black_start` and to the first frame after the black segment ends with key `lavfi.black_end`. The value is the frame’s timestamp. This metadata is added regardless of the minimum duration specified. The filter accepts the following options: black\_min\_duration, d Set the minimum detected black duration expressed in seconds. It must be a non-negative floating point number. Default value is 2.0. picture\_black\_ratio\_th, pic\_th Set the threshold for considering a picture "black". Express the minimum value for the ratio: nb\_black\_pixels / nb\_pixels for which a picture is considered black. Default value is 0.98. pixel\_black\_th, pix\_th Set the threshold for considering a pixel "black". The threshold expresses the maximum pixel luma value for which a pixel is considered "black". The provided value is scaled according to the following equation: absolute\_threshold = luma\_minimum\_value + pixel\_black\_th \* luma\_range\_size luma\_range\_size and luma\_minimum\_value depend on the input video format, the range is \[0-255\] for YUV full-range formats and \[16-235\] for YUV non full-range formats. Default value is 0.10. The following example sets the maximum pixel threshold to the minimum value, and detects only black intervals of 2 or more seconds: blackdetect=d=2:pix\_th=0.00 ### 39.13 blackframe Detect frames that are (almost) completely black. Can be useful to detect chapter transitions or commercials. Output lines consist of the frame number of the detected frame, the percentage of blackness, the position in the file if known or -1 and the timestamp in seconds. In order to display the output lines, you need to set the loglevel at least to the AV\_LOG\_INFO value. This filter exports frame metadata `lavfi.blackframe.pblack`. The value represents the percentage of pixels in the picture that are below the threshold value. It accepts the following parameters: amount The percentage of the pixels that have to be below the threshold; it defaults to `98`. threshold, thresh The threshold below which a pixel value is considered black; it defaults to `32`. ### 39.14 blend Blend two video frames into each other. The `blend` filter takes two input streams and outputs one stream, the first input is the "top" layer and second input is "bottom" layer. By default, the output terminates when the longest input terminates. The `tblend` (time blend) filter takes two consecutive frames from one single stream, and outputs the result obtained by blending the new frame on top of the old frame. A description of the accepted options follows. c0\_mode c1\_mode c2\_mode c3\_mode all\_mode Set blend mode for specific pixel component or all pixel components in case of all\_mode. Default value is `normal`. Available values for component modes are: ‘addition’ ‘and’ ‘average’ ‘bleach’ ‘burn’ ‘darken’ ‘difference’ ‘divide’ ‘dodge’ ‘exclusion’ ‘extremity’ ‘freeze’ ‘geometric’ ‘glow’ ‘grainextract’ ‘grainmerge’ ‘hardlight’ ‘hardmix’ ‘hardoverlay’ ‘harmonic’ ‘heat’ ‘interpolate’ ‘lighten’ ‘linearlight’ ‘multiply’ ‘multiply128’ ‘negation’ ‘normal’ ‘or’ ‘overlay’ ‘phoenix’ ‘pinlight’ ‘reflect’ ‘screen’ ‘softdifference’ ‘softlight’ ‘stain’ ‘subtract’ ‘vividlight’ ‘xor’ c0\_opacity c1\_opacity c2\_opacity c3\_opacity all\_opacity Set blend opacity for specific pixel component or all pixel components in case of all\_opacity. Only used in combination with pixel component blend modes. c0\_expr c1\_expr c2\_expr c3\_expr all\_expr Set blend expression for specific pixel component or all pixel components in case of all\_expr. Note that related mode options will be ignored if those are set. The expressions can use the following variables: N The sequential number of the filtered frame, starting from `0`. X Y the coordinates of the current sample W H the width and height of currently filtered plane SW SH Width and height scale for the plane being filtered. It is the ratio between the dimensions of the current plane to the luma plane, e.g. for a `yuv420p` frame, the values are `1,1` for the luma plane and `0.5,0.5` for the chroma planes. T Time of the current frame, expressed in seconds. TOP, A Value of pixel component at current location for first video frame (top layer). BOTTOM, B Value of pixel component at current location for second video frame (bottom layer). The `blend` filter also supports the framesync options. #### 39.14.1 Examples * Apply transition from bottom layer to top layer in first 10 seconds: blend=all\_expr='A\*(if(gte(T,10),1,T/10))+B\*(1-(if(gte(T,10),1,T/10)))' * Apply linear horizontal transition from top layer to bottom layer: blend=all\_expr='A\*(X/W)+B\*(1-X/W)' * Apply 1x1 checkerboard effect: blend=all\_expr='if(eq(mod(X,2),mod(Y,2)),A,B)' * Apply uncover left effect: blend=all\_expr='if(gte(N\*SW+X,W),A,B)' * Apply uncover down effect: blend=all\_expr='if(gte(Y-N\*SH,0),A,B)' * Apply uncover up-left effect: blend=all\_expr='if(gte(T\*SH\*40+Y,H)\*gte((T\*40\*SW+X)\*W/H,W),A,B)' * Split diagonally video and shows top and bottom layer on each side: blend=all\_expr='if(gt(X,Y\*(W/H)),A,B)' * Display differences between the current and the previous frame: tblend=all\_mode=grainextract #### 39.14.2 Commands This filter supports same commands as options. ### 39.15 blockdetect Determines blockiness of frames without altering the input frames. Based on Remco Muijs and Ihor Kirenko: "A no-reference blocking artifact measure for adaptive video processing." 2005 13th European signal processing conference. The filter accepts the following options: period\_min period\_max Set minimum and maximum values for determining pixel grids (periods). Default values are \[3,24\]. planes Set planes to filter. Default is first only. #### 39.15.1 Examples * Determine blockiness for the first plane and search for periods within \[8,32\]: blockdetect=period\_min=8:period\_max=32:planes=1 ### 39.16 blurdetect Determines blurriness of frames without altering the input frames. Based on Marziliano, Pina, et al. "A no-reference perceptual blur metric." Allows for a block-based abbreviation. The filter accepts the following options: low high Set low and high threshold values used by the Canny thresholding algorithm. The high threshold selects the "strong" edge pixels, which are then connected through 8-connectivity with the "weak" edge pixels selected by the low threshold. low and high threshold values must be chosen in the range \[0,1\], and low should be lesser or equal to high. Default value for low is `20/255`, and default value for high is `50/255`. radius Define the radius to search around an edge pixel for local maxima. block\_pct Determine blurriness only for the most significant blocks, given in percentage. block\_width Determine blurriness for blocks of width block\_width. If set to any value smaller 1, no blocks are used and the whole image is processed as one no matter of block\_height. block\_height Determine blurriness for blocks of height block\_height. If set to any value smaller 1, no blocks are used and the whole image is processed as one no matter of block\_width. planes Set planes to filter. Default is first only. #### 39.16.1 Examples * Determine blur for 80% of most significant 32x32 blocks: blurdetect=block\_width=32:block\_height=32:block\_pct=80 ### 39.17 bm3d Denoise frames using Block-Matching 3D algorithm. The filter accepts the following options. sigma Set denoising strength. Default value is 1. Allowed range is from 0 to 999.9. The denoising algorithm is very sensitive to sigma, so adjust it according to the source. block Set local patch size. This sets dimensions in 2D. bstep Set sliding step for processing blocks. Default value is 4. Allowed range is from 1 to 64. Smaller values allows processing more reference blocks and is slower. group Set maximal number of similar blocks for 3rd dimension. Default value is 1. When set to 1, no block matching is done. Larger values allows more blocks in single group. Allowed range is from 1 to 256. range Set radius for search block matching. Default is 9. Allowed range is from 1 to INT32\_MAX. mstep Set step between two search locations for block matching. Default is 1. Allowed range is from 1 to 64. Smaller is slower. thmse Set threshold of mean square error for block matching. Valid range is 0 to INT32\_MAX. hdthr Set thresholding parameter for hard thresholding in 3D transformed domain. Larger values results in stronger hard-thresholding filtering in frequency domain. estim Set filtering estimation mode. Can be `basic` or `final`. Default is `basic`. ref If enabled, filter will use 2nd stream for block matching. Default is disabled for `basic` value of estim option, and always enabled if value of estim is `final`. planes Set planes to filter. Default is all available except alpha. #### 39.17.1 Examples * Basic filtering with bm3d: bm3d=sigma=3:block=4:bstep=2:group=1:estim=basic * Same as above, but filtering only luma: bm3d=sigma=3:block=4:bstep=2:group=1:estim=basic:planes=1 * Same as above, but with both estimation modes: split\[a\]\[b\],\[a\]bm3d=sigma=3:block=4:bstep=2:group=1:estim=basic\[a\],\[b\]\[a\]bm3d=sigma=3:block=4:bstep=2:group=16:estim=final:ref=1 * Same as above, but prefilter with nlmeans filter instead: split\[a\]\[b\],\[a\]nlmeans=s=3:r=7:p=3\[a\],\[b\]\[a\]bm3d=sigma=3:block=4:bstep=2:group=16:estim=final:ref=1 ### 39.18 boxblur Apply a boxblur algorithm to the input video. It accepts the following parameters: luma\_radius, lr luma\_power, lp chroma\_radius, cr chroma\_power, cp alpha\_radius, ar alpha\_power, ap A description of the accepted options follows. luma\_radius, lr chroma\_radius, cr alpha\_radius, ar Set an expression for the box radius in pixels used for blurring the corresponding input plane. The radius value must be a non-negative number, and must not be greater than the value of the expression `min(w,h)/2` for the luma and alpha planes, and of `min(cw,ch)/2` for the chroma planes. Default value for luma\_radius is "2". If not specified, chroma\_radius and alpha\_radius default to the corresponding value set for luma\_radius. The expressions can contain the following constants: w h The input width and height in pixels. cw ch The input chroma image width and height in pixels. hsub vsub The horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p", hsub is 2 and vsub is 1. luma\_power, lp chroma\_power, cp alpha\_power, ap Specify how many times the boxblur filter is applied to the corresponding plane. Default value for luma\_power is 2. If not specified, chroma\_power and alpha\_power default to the corresponding value set for luma\_power. A value of 0 will disable the effect. #### 39.18.1 Examples * Apply a boxblur filter with the luma, chroma, and alpha radii set to 2: boxblur=luma\_radius=2:luma\_power=1 boxblur=2:1 * Set the luma radius to 2, and alpha and chroma radius to 0: boxblur=2:1:cr=0:ar=0 * Set the luma and chroma radii to a fraction of the video dimension: boxblur=luma\_radius=min(h\\,w)/10:luma\_power=1:chroma\_radius=min(cw\\,ch)/10:chroma\_power=1 ### 39.19 bwdif Deinterlace the input video ("bwdif" stands for "Bob Weaver Deinterlacing Filter"). Motion adaptive deinterlacing based on yadif with the use of w3fdif and cubic interpolation algorithms. It accepts the following parameters: mode The interlacing mode to adopt. It accepts one of the following values: 0, send\_frame Output one frame for each frame. 1, send\_field Output one frame for each field. The default value is `send_field`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: 0, tff Assume the top field is first. 1, bff Assume the bottom field is first. \-1, auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: 0, all Deinterlace all frames. 1, interlaced Only deinterlace frames marked as interlaced. The default value is `all`. ### 39.20 ccrepack Repack CEA-708 closed captioning side data This filter fixes various issues seen with commerical encoders related to upstream malformed CEA-708 payloads, specifically incorrect number of tuples (wrong cc\_count for the target FPS), and incorrect ordering of tuples (i.e. the CEA-608 tuples are not at the first entries in the payload). ### 39.21 cas Apply Contrast Adaptive Sharpen filter to video stream. The filter accepts the following options: strength Set the sharpening strength. Default value is 0. planes Set planes to filter. Default value is to filter all planes except alpha plane. #### 39.21.1 Commands This filter supports same commands as options. ### 39.22 chromahold Remove all color information for all colors except for certain one. The filter accepts the following options: color The color which will not be replaced with neutral chroma. similarity Similarity percentage with the above color. 0.01 matches only the exact key color, while 1.0 matches everything. blend Blend percentage. 0.0 makes pixels either fully gray, or not gray at all. Higher values result in more preserved color. yuv Signals that the color passed is already in YUV instead of RGB. Literal colors like "green" or "red" don’t make sense with this enabled anymore. This can be used to pass exact YUV values as hexadecimal numbers. #### 39.22.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.23 chromakey YUV colorspace color/chroma keying. The filter accepts the following options: color The color which will be replaced with transparency. similarity Similarity percentage with the key color. 0.01 matches only the exact key color, while 1.0 matches everything. blend Blend percentage. 0.0 makes pixels either fully transparent, or not transparent at all. Higher values result in semi-transparent pixels, with a higher transparency the more similar the pixels color is to the key color. yuv Signals that the color passed is already in YUV instead of RGB. Literal colors like "green" or "red" don’t make sense with this enabled anymore. This can be used to pass exact YUV values as hexadecimal numbers. #### 39.23.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. #### 39.23.2 Examples * Make every green pixel in the input image transparent: ffmpeg -i input.png -vf chromakey=green out.png * Overlay a greenscreen-video on top of a static black background. ffmpeg -f lavfi -i color=c=black:s=1280x720 -i video.mp4 -shortest -filter\_complex "\[1:v\]chromakey=0x70de77:0.1:0.2\[ckout\];\[0:v\]\[ckout\]overlay\[out\]" -map "\[out\]" output.mkv ### 39.24 chromanr Reduce chrominance noise. The filter accepts the following options: thres Set threshold for averaging chrominance values. Sum of absolute difference of Y, U and V pixel components of current pixel and neighbour pixels lower than this threshold will be used in averaging. Luma component is left unchanged and is copied to output. Default value is 30. Allowed range is from 1 to 200. sizew Set horizontal radius of rectangle used for averaging. Allowed range is from 1 to 100. Default value is 5. sizeh Set vertical radius of rectangle used for averaging. Allowed range is from 1 to 100. Default value is 5. stepw Set horizontal step when averaging. Default value is 1. Allowed range is from 1 to 50. Mostly useful to speed-up filtering. steph Set vertical step when averaging. Default value is 1. Allowed range is from 1 to 50. Mostly useful to speed-up filtering. threy Set Y threshold for averaging chrominance values. Set finer control for max allowed difference between Y components of current pixel and neigbour pixels. Default value is 200. Allowed range is from 1 to 200. threu Set U threshold for averaging chrominance values. Set finer control for max allowed difference between U components of current pixel and neigbour pixels. Default value is 200. Allowed range is from 1 to 200. threv Set V threshold for averaging chrominance values. Set finer control for max allowed difference between V components of current pixel and neigbour pixels. Default value is 200. Allowed range is from 1 to 200. distance Set distance type used in calculations. ‘manhattan’ Absolute difference. ‘euclidean’ Difference squared. Default distance type is manhattan. #### 39.24.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. ### 39.25 chromashift Shift chroma pixels horizontally and/or vertically. The filter accepts the following options: cbh Set amount to shift chroma-blue horizontally. cbv Set amount to shift chroma-blue vertically. crh Set amount to shift chroma-red horizontally. crv Set amount to shift chroma-red vertically. edge Set edge mode, can be smear, default, or warp. #### 39.25.1 Commands This filter supports the all above options as commands. ### 39.26 ciescope Display CIE color diagram with pixels overlaid onto it. The filter accepts the following options: system Set color system. ‘ntsc, 470m’ ‘ebu, 470bg’ ‘smpte’ ‘240m’ ‘apple’ ‘widergb’ ‘cie1931’ ‘rec709, hdtv’ ‘uhdtv, rec2020’ ‘dcip3’ cie Set CIE system. ‘xyy’ ‘ucs’ ‘luv’ gamuts Set what gamuts to draw. See `system` option for available values. size, s Set ciescope size, by default set to 512. intensity, i Set intensity used to map input pixel values to CIE diagram. contrast Set contrast used to draw tongue colors that are out of active color system gamut. corrgamma Correct gamma displayed on scope, by default enabled. showwhite Show white point on CIE diagram, by default disabled. gamma Set input gamma. Used only with XYZ input color space. fill Fill with CIE colors. By default is enabled. ### 39.27 codecview Visualize information exported by some codecs. Some codecs can export information through frames using side-data or other means. For example, some MPEG based codecs export motion vectors through the export\_mvs flag in the codec flags2 option. The filter accepts the following option: block Display block partition structure using the luma plane. mv Set motion vectors to visualize. Available flags for mv are: ‘pf’ forward predicted MVs of P-frames ‘bf’ forward predicted MVs of B-frames ‘bb’ backward predicted MVs of B-frames qp Display quantization parameters using the chroma planes. mv\_type, mvt Set motion vectors type to visualize. Includes MVs from all frames unless specified by frame\_type option. Available flags for mv\_type are: ‘fp’ forward predicted MVs ‘bp’ backward predicted MVs frame\_type, ft Set frame type to visualize motion vectors of. Available flags for frame\_type are: ‘if’ intra-coded frames (I-frames) ‘pf’ predicted frames (P-frames) ‘bf’ bi-directionally predicted frames (B-frames) #### 39.27.1 Examples * Visualize forward predicted MVs of all frames using `ffplay`: ffplay -flags2 +export\_mvs input.mp4 -vf codecview=mv\_type=fp * Visualize multi-directionals MVs of P and B-Frames using `ffplay`: ffplay -flags2 +export\_mvs input.mp4 -vf codecview=mv=pf+bf+bb ### 39.28 colorbalance Modify intensity of primary colors (red, green and blue) of input frames. The filter allows an input frame to be adjusted in the shadows, midtones or highlights regions for the red-cyan, green-magenta or blue-yellow balance. A positive adjustment value shifts the balance towards the primary color, a negative value towards the complementary color. The filter accepts the following options: rs gs bs Adjust red, green and blue shadows (darkest pixels). rm gm bm Adjust red, green and blue midtones (medium pixels). rh gh bh Adjust red, green and blue highlights (brightest pixels). Allowed ranges for options are `[-1.0, 1.0]`. Defaults are `0`. pl Preserve lightness when changing color balance. Default is disabled. #### 39.28.1 Examples * Add red color cast to shadows: colorbalance=rs=.3 #### 39.28.2 Commands This filter supports the all above options as commands. ### 39.29 colorcontrast Adjust color contrast between RGB components. The filter accepts the following options: rc Set the red-cyan contrast. Defaults is 0.0. Allowed range is from -1.0 to 1.0. gm Set the green-magenta contrast. Defaults is 0.0. Allowed range is from -1.0 to 1.0. by Set the blue-yellow contrast. Defaults is 0.0. Allowed range is from -1.0 to 1.0. rcw gmw byw Set the weight of each `rc`, `gm`, `by` option value. Default value is 0.0. Allowed range is from 0.0 to 1.0. If all weights are 0.0 filtering is disabled. pl Set the amount of preserving lightness. Default value is 0.0. Allowed range is from 0.0 to 1.0. #### 39.29.1 Commands This filter supports the all above options as commands. ### 39.30 colorcorrect Adjust color white balance selectively for blacks and whites. This filter operates in YUV colorspace. The filter accepts the following options: rl Set the red shadow spot. Allowed range is from -1.0 to 1.0. Default value is 0. bl Set the blue shadow spot. Allowed range is from -1.0 to 1.0. Default value is 0. rh Set the red highlight spot. Allowed range is from -1.0 to 1.0. Default value is 0. bh Set the blue highlight spot. Allowed range is from -1.0 to 1.0. Default value is 0. saturation Set the amount of saturation. Allowed range is from -3.0 to 3.0. Default value is 1. analyze If set to anything other than `manual` it will analyze every frame and use derived parameters for filtering output frame. Possible values are: ‘manual’ ‘average’ ‘minmax’ ‘median’ Default value is `manual`. #### 39.30.1 Commands This filter supports the all above options as commands. ### 39.31 colorchannelmixer Adjust video input frames by re-mixing color channels. This filter modifies a color channel by adding the values associated to the other channels of the same pixels. For example if the value to modify is red, the output value will be: red\=red\*rr + blue\*rb + green\*rg + alpha\*ra The filter accepts the following options: rr rg rb ra Adjust contribution of input red, green, blue and alpha channels for output red channel. Default is `1` for rr, and `0` for rg, rb and ra. gr gg gb ga Adjust contribution of input red, green, blue and alpha channels for output green channel. Default is `1` for gg, and `0` for gr, gb and ga. br bg bb ba Adjust contribution of input red, green, blue and alpha channels for output blue channel. Default is `1` for bb, and `0` for br, bg and ba. ar ag ab aa Adjust contribution of input red, green, blue and alpha channels for output alpha channel. Default is `1` for aa, and `0` for ar, ag and ab. Allowed ranges for options are `[-2.0, 2.0]`. pc Set preserve color mode. The accepted values are: ‘none’ Disable color preserving, this is default. ‘lum’ Preserve luminance. ‘max’ Preserve max value of RGB triplet. ‘avg’ Preserve average value of RGB triplet. ‘sum’ Preserve sum value of RGB triplet. ‘nrm’ Preserve normalized value of RGB triplet. ‘pwr’ Preserve power value of RGB triplet. pa Set the preserve color amount when changing colors. Allowed range is from `[0.0, 1.0]`. Default is `0.0`, thus disabled. #### 39.31.1 Examples * Convert source to grayscale: colorchannelmixer=.3:.4:.3:0:.3:.4:.3:0:.3:.4:.3 * Simulate sepia tones: colorchannelmixer=.393:.769:.189:0:.349:.686:.168:0:.272:.534:.131 #### 39.31.2 Commands This filter supports the all above options as commands. ### 39.32 colorize Overlay a solid color on the video stream. The filter accepts the following options: hue Set the color hue. Allowed range is from 0 to 360. Default value is 0. saturation Set the color saturation. Allowed range is from 0 to 1. Default value is 0.5. lightness Set the color lightness. Allowed range is from 0 to 1. Default value is 0.5. mix Set the mix of source lightness. By default is set to 1.0. Allowed range is from 0.0 to 1.0. #### 39.32.1 Commands This filter supports the all above options as commands. ### 39.33 colorkey RGB colorspace color keying. This filter operates on 8-bit RGB format frames by setting the alpha component of each pixel which falls within the similarity radius of the key color to 0. The alpha value for pixels outside the similarity radius depends on the value of the blend option. The filter accepts the following options: color Set the color for which alpha will be set to 0 (full transparency). See (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. Default is `black`. similarity Set the radius from the key color within which other colors also have full transparency. The computed distance is related to the unit fractional distance in 3D space between the RGB values of the key color and the pixel’s color. Range is 0.01 to 1.0. 0.01 matches within a very small radius around the exact key color, while 1.0 matches everything. Default is `0.01`. blend Set how the alpha value for pixels that fall outside the similarity radius is computed. 0.0 makes pixels either fully transparent or fully opaque. Higher values result in semi-transparent pixels, with greater transparency the more similar the pixel color is to the key color. Range is 0.0 to 1.0. Default is `0.0`. #### 39.33.1 Examples * Make every green pixel in the input image transparent: ffmpeg -i input.png -vf colorkey=green out.png * Overlay a greenscreen-video on top of a static background image. ffmpeg -i background.png -i video.mp4 -filter\_complex "\[1:v\]colorkey=0x3BBD1E:0.3:0.2\[ckout\];\[0:v\]\[ckout\]overlay\[out\]" -map "\[out\]" output.flv #### 39.33.2 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.34 colorhold Remove all color information for all RGB colors except for certain one. The filter accepts the following options: color The color which will not be replaced with neutral gray. similarity Similarity percentage with the above color. 0.01 matches only the exact key color, while 1.0 matches everything. blend Blend percentage. 0.0 makes pixels fully gray. Higher values result in more preserved color. #### 39.34.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.35 colorlevels Adjust video input frames using levels. The filter accepts the following options: rimin gimin bimin aimin Adjust red, green, blue and alpha input black point. Allowed ranges for options are `[-1.0, 1.0]`. Defaults are `0`. rimax gimax bimax aimax Adjust red, green, blue and alpha input white point. Allowed ranges for options are `[-1.0, 1.0]`. Defaults are `1`. Input levels are used to lighten highlights (bright tones), darken shadows (dark tones), change the balance of bright and dark tones. romin gomin bomin aomin Adjust red, green, blue and alpha output black point. Allowed ranges for options are `[0, 1.0]`. Defaults are `0`. romax gomax bomax aomax Adjust red, green, blue and alpha output white point. Allowed ranges for options are `[0, 1.0]`. Defaults are `1`. Output levels allows manual selection of a constrained output level range. preserve Set preserve color mode. The accepted values are: ‘none’ Disable color preserving, this is default. ‘lum’ Preserve luminance. ‘max’ Preserve max value of RGB triplet. ‘avg’ Preserve average value of RGB triplet. ‘sum’ Preserve sum value of RGB triplet. ‘nrm’ Preserve normalized value of RGB triplet. ‘pwr’ Preserve power value of RGB triplet. #### 39.35.1 Examples * Make video output darker: colorlevels=rimin=0.058:gimin=0.058:bimin=0.058 * Increase contrast: colorlevels=rimin=0.039:gimin=0.039:bimin=0.039:rimax=0.96:gimax=0.96:bimax=0.96 * Make video output lighter: colorlevels=rimax=0.902:gimax=0.902:bimax=0.902 * Increase brightness: colorlevels=romin=0.5:gomin=0.5:bomin=0.5 #### 39.35.2 Commands This filter supports the all above options as commands. ### 39.36 colormap Apply custom color maps to video stream. This filter needs three input video streams. First stream is video stream that is going to be filtered out. Second and third video stream specify color patches for source color to target color mapping. The filter accepts the following options: patch\_size Set the source and target video stream patch size in pixels. nb\_patches Set the max number of used patches from source and target video stream. Default value is number of patches available in additional video streams. Max allowed number of patches is `64`. type Set the adjustments used for target colors. Can be `relative` or `absolute`. Defaults is `absolute`. kernel Set the kernel used to measure color differences between mapped colors. The accepted values are: ‘euclidean’ ‘weuclidean’ Default is `euclidean`. ### 39.37 colormatrix Convert color matrix. The filter accepts the following options: src dst Specify the source and destination color matrix. Both values must be specified. The accepted values are: ‘bt709’ BT.709 ‘fcc’ FCC ‘bt601’ BT.601 ‘bt470’ BT.470 ‘bt470bg’ BT.470BG ‘smpte170m’ SMPTE-170M ‘smpte240m’ SMPTE-240M ‘bt2020’ BT.2020 For example to convert from BT.601 to SMPTE-240M, use the command: colormatrix=bt601:smpte240m ### 39.38 colorspace Convert colorspace, transfer characteristics or color primaries. Input video needs to have an even size. The filter accepts the following options: all Specify all color properties at once. The accepted values are: ‘bt470m’ BT.470M ‘bt470bg’ BT.470BG ‘bt601-6-525’ BT.601-6 525 ‘bt601-6-625’ BT.601-6 625 ‘bt709’ BT.709 ‘smpte170m’ SMPTE-170M ‘smpte240m’ SMPTE-240M ‘bt2020’ BT.2020 space Specify output colorspace. The accepted values are: ‘bt709’ BT.709 ‘fcc’ FCC ‘bt470bg’ BT.470BG or BT.601-6 625 ‘smpte170m’ SMPTE-170M or BT.601-6 525 ‘smpte240m’ SMPTE-240M ‘ycgco’ YCgCo ‘bt2020ncl’ BT.2020 with non-constant luminance trc Specify output transfer characteristics. The accepted values are: ‘bt709’ BT.709 ‘bt470m’ BT.470M ‘bt470bg’ BT.470BG ‘gamma22’ Constant gamma of 2.2 ‘gamma28’ Constant gamma of 2.8 ‘smpte170m’ SMPTE-170M, BT.601-6 625 or BT.601-6 525 ‘smpte240m’ SMPTE-240M ‘srgb’ SRGB ‘iec61966-2-1’ iec61966-2-1 ‘iec61966-2-4’ iec61966-2-4 ‘xvycc’ xvycc ‘bt2020-10’ BT.2020 for 10-bits content ‘bt2020-12’ BT.2020 for 12-bits content primaries Specify output color primaries. The accepted values are: ‘bt709’ BT.709 ‘bt470m’ BT.470M ‘bt470bg’ BT.470BG or BT.601-6 625 ‘smpte170m’ SMPTE-170M or BT.601-6 525 ‘smpte240m’ SMPTE-240M ‘film’ film ‘smpte431’ SMPTE-431 ‘smpte432’ SMPTE-432 ‘bt2020’ BT.2020 ‘jedec-p22’ JEDEC P22 phosphors range Specify output color range. The accepted values are: ‘tv’ TV (restricted) range ‘mpeg’ MPEG (restricted) range ‘pc’ PC (full) range ‘jpeg’ JPEG (full) range format Specify output color format. The accepted values are: ‘yuv420p’ YUV 4:2:0 planar 8-bits ‘yuv420p10’ YUV 4:2:0 planar 10-bits ‘yuv420p12’ YUV 4:2:0 planar 12-bits ‘yuv422p’ YUV 4:2:2 planar 8-bits ‘yuv422p10’ YUV 4:2:2 planar 10-bits ‘yuv422p12’ YUV 4:2:2 planar 12-bits ‘yuv444p’ YUV 4:4:4 planar 8-bits ‘yuv444p10’ YUV 4:4:4 planar 10-bits ‘yuv444p12’ YUV 4:4:4 planar 12-bits fast Do a fast conversion, which skips gamma/primary correction. This will take significantly less CPU, but will be mathematically incorrect. To get output compatible with that produced by the colormatrix filter, use fast=1. dither Specify dithering mode. The accepted values are: ‘none’ No dithering ‘fsb’ Floyd-Steinberg dithering wpadapt Whitepoint adaptation mode. The accepted values are: ‘bradford’ Bradford whitepoint adaptation ‘vonkries’ von Kries whitepoint adaptation ‘identity’ identity whitepoint adaptation (i.e. no whitepoint adaptation) iall Override all input properties at once. Same accepted values as all. ispace Override input colorspace. Same accepted values as space. iprimaries Override input color primaries. Same accepted values as primaries. itrc Override input transfer characteristics. Same accepted values as trc. irange Override input color range. Same accepted values as range. The filter converts the transfer characteristics, color space and color primaries to the specified user values. The output value, if not specified, is set to a default value based on the "all" property. If that property is also not specified, the filter will log an error. The output color range and format default to the same value as the input color range and format. The input transfer characteristics, color space, color primaries and color range should be set on the input data. If any of these are missing, the filter will log an error and no conversion will take place. For example to convert the input to SMPTE-240M, use the command: colorspace=smpte240m ### 39.39 colortemperature Adjust color temperature in video to simulate variations in ambient color temperature. The filter accepts the following options: temperature Set the temperature in Kelvin. Allowed range is from 1000 to 40000. Default value is 6500 K. mix Set mixing with filtered output. Allowed range is from 0 to 1. Default value is 1. pl Set the amount of preserving lightness. Allowed range is from 0 to 1. Default value is 0. #### 39.39.1 Commands This filter supports same commands as options. ### 39.40 convolution Apply convolution of 3x3, 5x5, 7x7 or horizontal/vertical up to 49 elements. The filter accepts the following options: 0m 1m 2m 3m Set matrix for each plane. Matrix is sequence of 9, 25 or 49 signed integers in square mode, and from 1 to 49 odd number of signed integers in row mode. 0rdiv 1rdiv 2rdiv 3rdiv Set multiplier for calculated value for each plane. If unset or 0, it will be 1/sum of all matrix elements. 0bias 1bias 2bias 3bias Set bias for each plane. This value is added to the result of the multiplication. Useful for making the overall image brighter or darker. Default is 0.0. 0mode 1mode 2mode 3mode Set matrix mode for each plane. Can be square, row or column. Default is square. #### 39.40.1 Commands This filter supports the all above options as commands. #### 39.40.2 Examples * Apply sharpen: convolution="0 -1 0 -1 5 -1 0 -1 0:0 -1 0 -1 5 -1 0 -1 0:0 -1 0 -1 5 -1 0 -1 0:0 -1 0 -1 5 -1 0 -1 0" * Apply blur: convolution="1 1 1 1 1 1 1 1 1:1 1 1 1 1 1 1 1 1:1 1 1 1 1 1 1 1 1:1 1 1 1 1 1 1 1 1:1/9:1/9:1/9:1/9" * Apply edge enhance: convolution="0 0 0 -1 1 0 0 0 0:0 0 0 -1 1 0 0 0 0:0 0 0 -1 1 0 0 0 0:0 0 0 -1 1 0 0 0 0:5:1:1:1:0:128:128:128" * Apply edge detect: convolution="0 1 0 1 -4 1 0 1 0:0 1 0 1 -4 1 0 1 0:0 1 0 1 -4 1 0 1 0:0 1 0 1 -4 1 0 1 0:5:5:5:1:0:128:128:128" * Apply laplacian edge detector which includes diagonals: convolution="1 1 1 1 -8 1 1 1 1:1 1 1 1 -8 1 1 1 1:1 1 1 1 -8 1 1 1 1:1 1 1 1 -8 1 1 1 1:5:5:5:1:0:128:128:0" * Apply emboss: convolution="-2 -1 0 -1 1 1 0 1 2:-2 -1 0 -1 1 1 0 1 2:-2 -1 0 -1 1 1 0 1 2:-2 -1 0 -1 1 1 0 1 2" ### 39.41 convolve Apply 2D convolution of video stream in frequency domain using second stream as impulse. The filter accepts the following options: planes Set which planes to process. impulse Set which impulse video frames will be processed, can be first or all. Default is all. The `convolve` filter also supports the framesync options. ### 39.42 copy Copy the input video source unchanged to the output. This is mainly useful for testing purposes. ### 39.43 coreimage Video filtering on GPU using Apple’s CoreImage API on OSX. Hardware acceleration is based on an OpenGL context. Usually, this means it is processed by video hardware. However, software-based OpenGL implementations exist which means there is no guarantee for hardware processing. It depends on the respective OSX. There are many filters and image generators provided by Apple that come with a large variety of options. The filter has to be referenced by its name along with its options. The coreimage filter accepts the following options: list\_filters List all available filters and generators along with all their respective options as well as possible minimum and maximum values along with the default values. list\_filters=true filter Specify all filters by their respective name and options. Use list\_filters to determine all valid filter names and options. Numerical options are specified by a float value and are automatically clamped to their respective value range. Vector and color options have to be specified by a list of space separated float values. Character escaping has to be done. A special option name `default` is available to use default options for a filter. It is required to specify either `default` or at least one of the filter options. All omitted options are used with their default values. The syntax of the filter string is as follows: filter=<NAME>@<OPTION>=<VALUE>\[@<OPTION>=<VALUE>\]\[@...\]\[#<NAME>@<OPTION>=<VALUE>\[@<OPTION>=<VALUE>\]\[@...\]\]\[#...\] output\_rect Specify a rectangle where the output of the filter chain is copied into the input image. It is given by a list of space separated float values: output\_rect=x\\ y\\ width\\ height If not given, the output rectangle equals the dimensions of the input image. The output rectangle is automatically cropped at the borders of the input image. Negative values are valid for each component. output\_rect=25\\ 25\\ 100\\ 100 Several filters can be chained for successive processing without GPU-HOST transfers allowing for fast processing of complex filter chains. Currently, only filters with zero (generators) or exactly one (filters) input image and one output image are supported. Also, transition filters are not yet usable as intended. Some filters generate output images with additional padding depending on the respective filter kernel. The padding is automatically removed to ensure the filter output has the same size as the input image. For image generators, the size of the output image is determined by the previous output image of the filter chain or the input image of the whole filterchain, respectively. The generators do not use the pixel information of this image to generate their output. However, the generated output is blended onto this image, resulting in partial or complete coverage of the output image. The coreimagesrc video source can be used for generating input images which are directly fed into the filter chain. By using it, providing input images by another video source or an input video is not required. #### 39.43.1 Examples * List all filters available: coreimage=list\_filters=true * Use the CIBoxBlur filter with default options to blur an image: coreimage=filter=CIBoxBlur@default * Use a filter chain with CISepiaTone at default values and CIVignetteEffect with its center at 100x100 and a radius of 50 pixels: coreimage=filter=CIBoxBlur@default#CIVignetteEffect@inputCenter=100\\ 100@inputRadius=50 * Use nullsrc and CIQRCodeGenerator to create a QR code for the FFmpeg homepage, given as complete and escaped command-line for Apple’s standard bash shell: ffmpeg -f lavfi -i nullsrc=s=100x100,coreimage=filter=CIQRCodeGenerator@inputMessage=https\\\\\\\\\\://FFmpeg.org/@inputCorrectionLevel=H -frames:v 1 QRCode.png ### 39.44 corr Obtain the correlation between two input videos. This filter takes two input videos. Both input videos must have the same resolution and pixel format for this filter to work correctly. Also it assumes that both inputs have the same number of frames, which are compared one by one. The obtained per component, average, min and max correlation is printed through the logging system. The filter stores the calculated correlation of each frame in frame metadata. This filter also supports the framesync options. In the below example the input file main.mpg being processed is compared with the reference file ref.mpg. ffmpeg -i main.mpg -i ref.mpg -lavfi corr -f null - ### 39.45 cover\_rect Cover a rectangular object It accepts the following options: cover Filepath of the optional cover image, needs to be in yuv420. mode Set covering mode. It accepts the following values: ‘cover’ cover it by the supplied image ‘blur’ cover it by interpolating the surrounding pixels Default value is blur. #### 39.45.1 Examples * Cover a rectangular object by the supplied image of a given video using `ffmpeg`: ffmpeg -i file.ts -vf find\_rect=newref.pgm,cover\_rect=cover.jpg:mode=cover new.mkv ### 39.46 crop Crop the input video to given dimensions. It accepts the following parameters: w, out\_w The width of the output video. It defaults to `iw`. This expression is evaluated only once during the filter configuration, or when the ‘w’ or ‘out\_w’ command is sent. h, out\_h The height of the output video. It defaults to `ih`. This expression is evaluated only once during the filter configuration, or when the ‘h’ or ‘out\_h’ command is sent. x The horizontal position, in the input video, of the left edge of the output video. It defaults to `(in_w-out_w)/2`. This expression is evaluated per-frame. y The vertical position, in the input video, of the top edge of the output video. It defaults to `(in_h-out_h)/2`. This expression is evaluated per-frame. keep\_aspect If set to 1 will force the output display aspect ratio to be the same of the input, by changing the output sample aspect ratio. It defaults to 0. exact Enable exact cropping. If enabled, subsampled videos will be cropped at exact width/height/x/y as specified and will not be rounded to nearest smaller value. It defaults to 0. The out\_w, out\_h, x, y parameters are expressions containing the following constants: x y The computed values for x and y. They are evaluated for each new frame. in\_w in\_h The input width and height. iw ih These are the same as in\_w and in\_h. out\_w out\_h The output (cropped) width and height. ow oh These are the same as out\_w and out\_h. a same as iw / ih sar input sample aspect ratio dar input display aspect ratio, it is the same as (iw / ih) \* sar hsub vsub horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. n The number of the input frame, starting from 0. pos the position in the file of the input frame, NAN if unknown; deprecated, do not use t The timestamp expressed in seconds. It’s NAN if the input timestamp is unknown. The expression for out\_w may depend on the value of out\_h, and the expression for out\_h may depend on out\_w, but they cannot depend on x and y, as x and y are evaluated after out\_w and out\_h. The x and y parameters specify the expressions for the position of the top-left corner of the output (non-cropped) area. They are evaluated for each frame. If the evaluated value is not valid, it is approximated to the nearest valid value. The expression for x may depend on y, and the expression for y may depend on x. #### 39.46.1 Examples * Crop area with size 100x100 at position (12,34). crop=100:100:12:34 Using named options, the example above becomes: crop=w=100:h=100:x=12:y=34 * Crop the central input area with size 100x100: crop=100:100 * Crop the central input area with size 2/3 of the input video: crop=2/3\*in\_w:2/3\*in\_h * Crop the input video central square: crop=out\_w=in\_h crop=in\_h * Delimit the rectangle with the top-left corner placed at position 100:100 and the right-bottom corner corresponding to the right-bottom corner of the input image. crop=in\_w-100:in\_h-100:100:100 * Crop 10 pixels from the left and right borders, and 20 pixels from the top and bottom borders crop=in\_w-2\*10:in\_h-2\*20 * Keep only the bottom right quarter of the input image: crop=in\_w/2:in\_h/2:in\_w/2:in\_h/2 * Crop height for getting Greek harmony: crop=in\_w:1/PHI\*in\_w * Apply trembling effect: crop=in\_w/2:in\_h/2:(in\_w-out\_w)/2+((in\_w-out\_w)/2)\*sin(n/10):(in\_h-out\_h)/2 +((in\_h-out\_h)/2)\*sin(n/7) * Apply erratic camera effect depending on timestamp: crop=in\_w/2:in\_h/2:(in\_w-out\_w)/2+((in\_w-out\_w)/2)\*sin(t\*10):(in\_h-out\_h)/2 +((in\_h-out\_h)/2)\*sin(t\*13) * Set x depending on the value of y: crop=in\_w/2:in\_h/2:y:10+10\*sin(n/10) #### 39.46.2 Commands This filter supports the following commands: w, out\_w h, out\_h x y Set width/height of the output video and the horizontal/vertical position in the input video. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.47 cropdetect Auto-detect the crop size. It calculates the necessary cropping parameters and prints the recommended parameters via the logging system. The detected dimensions correspond to the non-black or video area of the input video according to mode. It accepts the following parameters: mode Depending on mode crop detection is based on either the mere black value of surrounding pixels or a combination of motion vectors and edge pixels. ‘black’ Detect black pixels surrounding the playing video. For fine control use option limit. ‘mvedges’ Detect the playing video by the motion vectors inside the video and scanning for edge pixels typically forming the border of a playing video. limit Set higher black value threshold, which can be optionally specified from nothing (0) to everything (255 for 8-bit based formats). An intensity value greater to the set value is considered non-black. It defaults to 24. You can also specify a value between 0.0 and 1.0 which will be scaled depending on the bitdepth of the pixel format. round The value which the width/height should be divisible by. It defaults to 16. The offset is automatically adjusted to center the video. Use 2 to get only even dimensions (needed for 4:2:2 video). 16 is best when encoding to most video codecs. skip Set the number of initial frames for which evaluation is skipped. Default is 2. Range is 0 to INT\_MAX. reset\_count, reset Set the counter that determines after how many frames cropdetect will reset the previously detected largest video area and start over to detect the current optimal crop area. Default value is 0. This can be useful when channel logos distort the video area. 0 indicates ’never reset’, and returns the largest area encountered during playback. mv\_threshold Set motion in pixel units as threshold for motion detection. It defaults to 8. low high Set low and high threshold values used by the Canny thresholding algorithm. The high threshold selects the "strong" edge pixels, which are then connected through 8-connectivity with the "weak" edge pixels selected by the low threshold. low and high threshold values must be chosen in the range \[0,1\], and low should be lesser or equal to high. Default value for low is `5/255`, and default value for high is `15/255`. #### 39.47.1 Examples * Find video area surrounded by black borders: ffmpeg -i file.mp4 -vf cropdetect,metadata=mode=print -f null - * Find an embedded video area, generate motion vectors beforehand: ffmpeg -i file.mp4 -vf mestimate,cropdetect=mode=mvedges,metadata=mode=print -f null - * Find an embedded video area, use motion vectors from decoder: ffmpeg -flags2 +export\_mvs -i file.mp4 -vf cropdetect=mode=mvedges,metadata=mode=print -f null - #### 39.47.2 Commands This filter supports the following commands: limit The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.48 cue Delay video filtering until a given wallclock timestamp. The filter first passes on preroll amount of frames, then it buffers at most buffer amount of frames and waits for the cue. After reaching the cue it forwards the buffered frames and also any subsequent frames coming in its input. The filter can be used synchronize the output of multiple ffmpeg processes for realtime output devices like decklink. By putting the delay in the filtering chain and pre-buffering frames the process can pass on data to output almost immediately after the target wallclock timestamp is reached. Perfect frame accuracy cannot be guaranteed, but the result is good enough for some use cases. cue The cue timestamp expressed in a UNIX timestamp in microseconds. Default is 0. preroll The duration of content to pass on as preroll expressed in seconds. Default is 0. buffer The maximum duration of content to buffer before waiting for the cue expressed in seconds. Default is 0. ### 39.49 curves Apply color adjustments using curves. This filter is similar to the Adobe Photoshop and GIMP curves tools. Each component (red, green and blue) has its values defined by N key points tied from each other using a smooth curve. The x-axis represents the pixel values from the input frame, and the y-axis the new pixel values to be set for the output frame. By default, a component curve is defined by the two points (0;0) and (1;1). This creates a straight line where each original pixel value is "adjusted" to its own value, which means no change to the image. The filter allows you to redefine these two points and add some more. A new curve will be defined to pass smoothly through all these new coordinates. The new defined points need to be strictly increasing over the x-axis, and their x and y values must be in the \[0;1\] interval. The curve is formed by using a natural or monotonic cubic spline interpolation, depending on the interp option (default: `natural`). The `natural` spline produces a smoother curve in general while the monotonic (`pchip`) spline guarantees the transitions between the specified points to be monotonic. If the computed curves happened to go outside the vector spaces, the values will be clipped accordingly. The filter accepts the following options: preset Select one of the available color presets. This option can be used in addition to the r, g, b parameters; in this case, the later options takes priority on the preset values. Available presets are: ‘none’ ‘color\_negative’ ‘cross\_process’ ‘darker’ ‘increase\_contrast’ ‘lighter’ ‘linear\_contrast’ ‘medium\_contrast’ ‘negative’ ‘strong\_contrast’ ‘vintage’ Default is `none`. master, m Set the master key points. These points will define a second pass mapping. It is sometimes called a "luminance" or "value" mapping. It can be used with r, g, b or all since it acts like a post-processing LUT. red, r Set the key points for the red component. green, g Set the key points for the green component. blue, b Set the key points for the blue component. all Set the key points for all components (not including master). Can be used in addition to the other key points component options. In this case, the unset component(s) will fallback on this all setting. psfile Specify a Photoshop curves file (`.acv`) to import the settings from. plot Save Gnuplot script of the curves in specified file. interp Specify the kind of interpolation. Available algorithms are: ‘natural’ Natural cubic spline using a piece-wise cubic polynomial that is twice continuously differentiable. ‘pchip’ Monotonic cubic spline using a piecewise cubic Hermite interpolating polynomial (PCHIP). To avoid some filtergraph syntax conflicts, each key points list need to be defined using the following syntax: `x0/y0 x1/y1 x2/y2 ...`. #### 39.49.1 Commands This filter supports same commands as options. #### 39.49.2 Examples * Increase slightly the middle level of blue: curves=blue='0/0 0.5/0.58 1/1' * Vintage effect: curves=r='0/0.11 .42/.51 1/0.95':g='0/0 0.50/0.48 1/1':b='0/0.22 .49/.44 1/0.8' Here we obtain the following coordinates for each components: red `(0;0.11) (0.42;0.51) (1;0.95)` green `(0;0) (0.50;0.48) (1;1)` blue `(0;0.22) (0.49;0.44) (1;0.80)` * The previous example can also be achieved with the associated built-in preset: curves=preset=vintage * Or simply: curves=vintage * Use a Photoshop preset and redefine the points of the green component: curves=psfile='MyCurvesPresets/purple.acv':green='0/0 0.45/0.53 1/1' * Check out the curves of the `cross_process` profile using `ffmpeg` and `gnuplot`: ffmpeg -f lavfi -i color -vf curves=cross\_process:plot=/tmp/curves.plt -frames:v 1 -f null - gnuplot -p /tmp/curves.plt ### 39.50 datascope Video data analysis filter. This filter shows hexadecimal pixel values of part of video. The filter accepts the following options: size, s Set output video size. x Set x offset from where to pick pixels. y Set y offset from where to pick pixels. mode Set scope mode, can be one of the following: ‘mono’ Draw hexadecimal pixel values with white color on black background. ‘color’ Draw hexadecimal pixel values with input video pixel color on black background. ‘color2’ Draw hexadecimal pixel values on color background picked from input video, the text color is picked in such way so its always visible. axis Draw rows and columns numbers on left and top of video. opacity Set background opacity. format Set display number format. Can be `hex`, or `dec`. Default is `hex`. components Set pixel components to display. By default all pixel components are displayed. #### 39.50.1 Commands This filter supports same commands as options excluding `size` option. ### 39.51 dblur Apply Directional blur filter. The filter accepts the following options: angle Set angle of directional blur. Default is `45`. radius Set radius of directional blur. Default is `5`. planes Set which planes to filter. By default all planes are filtered. #### 39.51.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.52 dctdnoiz Denoise frames using 2D DCT (frequency domain filtering). This filter is not designed for real time. The filter accepts the following options: sigma, s Set the noise sigma constant. This sigma defines a hard threshold of `3 * sigma`; every DCT coefficient (absolute value) below this threshold with be dropped. If you need a more advanced filtering, see expr. Default is `0`. overlap Set number overlapping pixels for each block. Since the filter can be slow, you may want to reduce this value, at the cost of a less effective filter and the risk of various artefacts. If the overlapping value doesn’t permit processing the whole input width or height, a warning will be displayed and according borders won’t be denoised. Default value is blocksize\-1, which is the best possible setting. expr, e Set the coefficient factor expression. For each coefficient of a DCT block, this expression will be evaluated as a multiplier value for the coefficient. If this is option is set, the sigma option will be ignored. The absolute value of the coefficient can be accessed through the c variable. n Set the blocksize using the number of bits. `1<<n` defines the blocksize, which is the width and height of the processed blocks. The default value is 3 (8x8) and can be raised to 4 for a blocksize of 16x16. Note that changing this setting has huge consequences on the speed processing. Also, a larger block size does not necessarily means a better de-noising. #### 39.52.1 Examples Apply a denoise with a sigma of `4.5`: dctdnoiz=4.5 The same operation can be achieved using the expression system: dctdnoiz=e='gte(c, 4.5\*3)' Violent denoise using a block size of `16x16`: dctdnoiz=15:n=4 ### 39.53 deband Remove banding artifacts from input video. It works by replacing banded pixels with average value of referenced pixels. The filter accepts the following options: 1thr 2thr 3thr 4thr Set banding detection threshold for each plane. Default is 0.02. Valid range is 0.00003 to 0.5. If difference between current pixel and reference pixel is less than threshold, it will be considered as banded. range, r Banding detection range in pixels. Default is 16. If positive, random number in range 0 to set value will be used. If negative, exact absolute value will be used. The range defines square of four pixels around current pixel. direction, d Set direction in radians from which four pixel will be compared. If positive, random direction from 0 to set direction will be picked. If negative, exact of absolute value will be picked. For example direction 0, -PI or -2\*PI radians will pick only pixels on same row and -PI/2 will pick only pixels on same column. blur, b If enabled, current pixel is compared with average value of all four surrounding pixels. The default is enabled. If disabled current pixel is compared with all four surrounding pixels. The pixel is considered banded if only all four differences with surrounding pixels are less than threshold. coupling, c If enabled, current pixel is changed if and only if all pixel components are banded, e.g. banding detection threshold is triggered for all color components. The default is disabled. #### 39.53.1 Commands This filter supports the all above options as commands. ### 39.54 deblock Remove blocking artifacts from input video. The filter accepts the following options: filter Set filter type, can be weak or strong. Default is strong. This controls what kind of deblocking is applied. block Set size of block, allowed range is from 4 to 512. Default is 8. alpha beta gamma delta Set blocking detection thresholds. Allowed range is 0 to 1. Defaults are: 0.098 for alpha and 0.05 for the rest. Using higher threshold gives more deblocking strength. Setting alpha controls threshold detection at exact edge of block. Remaining options controls threshold detection near the edge. Each one for below/above or left/right. Setting any of those to 0 disables deblocking. planes Set planes to filter. Default is to filter all available planes. #### 39.54.1 Examples * Deblock using weak filter and block size of 4 pixels. deblock=filter=weak:block=4 * Deblock using strong filter, block size of 4 pixels and custom thresholds for deblocking more edges. deblock=filter=strong:block=4:alpha=0.12:beta=0.07:gamma=0.06:delta=0.05 * Similar as above, but filter only first plane. deblock=filter=strong:block=4:alpha=0.12:beta=0.07:gamma=0.06:delta=0.05:planes=1 * Similar as above, but filter only second and third plane. deblock=filter=strong:block=4:alpha=0.12:beta=0.07:gamma=0.06:delta=0.05:planes=6 #### 39.54.2 Commands This filter supports the all above options as commands. ### 39.55 decimate Drop duplicated frames at regular intervals. The filter accepts the following options: cycle Set the number of frames from which one will be dropped. Setting this to N means one frame in every batch of N frames will be dropped. Default is `5`. dupthresh Set the threshold for duplicate detection. If the difference metric for a frame is less than or equal to this value, then it is declared as duplicate. Default is `1.1` scthresh Set scene change threshold. Default is `15`. blockx blocky Set the size of the x and y-axis blocks used during metric calculations. Larger blocks give better noise suppression, but also give worse detection of small movements. Must be a power of two. Default is `32`. ppsrc Mark main input as a pre-processed input and activate clean source input stream. This allows the input to be pre-processed with various filters to help the metrics calculation while keeping the frame selection lossless. When set to `1`, the first stream is for the pre-processed input, and the second stream is the clean source from where the kept frames are chosen. Default is `0`. chroma Set whether or not chroma is considered in the metric calculations. Default is `1`. mixed Set whether or not the input only partially contains content to be decimated. Default is `false`. If enabled video output stream will be in variable frame rate. ### 39.56 deconvolve Apply 2D deconvolution of video stream in frequency domain using second stream as impulse. The filter accepts the following options: planes Set which planes to process. impulse Set which impulse video frames will be processed, can be first or all. Default is all. noise Set noise when doing divisions. Default is 0.0000001. Useful when width and height are not same and not power of 2 or if stream prior to convolving had noise. The `deconvolve` filter also supports the framesync options. ### 39.57 dedot Reduce cross-luminance (dot-crawl) and cross-color (rainbows) from video. It accepts the following options: m Set mode of operation. Can be combination of dotcrawl for cross-luminance reduction and/or rainbows for cross-color reduction. lt Set spatial luma threshold. Lower values increases reduction of cross-luminance. tl Set tolerance for temporal luma. Higher values increases reduction of cross-luminance. tc Set tolerance for chroma temporal variation. Higher values increases reduction of cross-color. ct Set temporal chroma threshold. Lower values increases reduction of cross-color. ### 39.58 deflate Apply deflate effect to the video. This filter replaces the pixel by the local(3x3) average by taking into account only values lower than the pixel. It accepts the following options: threshold0 threshold1 threshold2 threshold3 Limit the maximum change for each plane, default is 65535. If 0, plane will remain unchanged. #### 39.58.1 Commands This filter supports the all above options as commands. ### 39.59 deflicker Remove temporal frame luminance variations. It accepts the following options: size, s Set moving-average filter size in frames. Default is 5. Allowed range is 2 - 129. mode, m Set averaging mode to smooth temporal luminance variations. Available values are: ‘am’ Arithmetic mean ‘gm’ Geometric mean ‘hm’ Harmonic mean ‘qm’ Quadratic mean ‘cm’ Cubic mean ‘pm’ Power mean ‘median’ Median bypass Do not actually modify frame. Useful when one only wants metadata. ### 39.60 dejudder Remove judder produced by partially interlaced telecined content. Judder can be introduced, for instance, by pullup filter. If the original source was partially telecined content then the output of `pullup,dejudder` will have a variable frame rate. May change the recorded frame rate of the container. Aside from that change, this filter will not affect constant frame rate video. The option available in this filter is: cycle Specify the length of the window over which the judder repeats. Accepts any integer greater than 1. Useful values are: ‘4’ If the original was telecined from 24 to 30 fps (Film to NTSC). ‘5’ If the original was telecined from 25 to 30 fps (PAL to NTSC). ‘20’ If a mixture of the two. The default is ‘4’. ### 39.61 delogo Suppress a TV station logo by a simple interpolation of the surrounding pixels. Just set a rectangle covering the logo and watch it disappear (and sometimes something even uglier appear - your mileage may vary). It accepts the following parameters: x y Specify the top left corner coordinates of the logo. They must be specified. w h Specify the width and height of the logo to clear. They must be specified. show When set to 1, a green rectangle is drawn on the screen to simplify finding the right x, y, w, and h parameters. The default value is 0. The rectangle is drawn on the outermost pixels which will be (partly) replaced with interpolated values. The values of the next pixels immediately outside this rectangle in each direction will be used to compute the interpolated pixel values inside the rectangle. #### 39.61.1 Examples * Set a rectangle covering the area with top left corner coordinates 0,0 and size 100x77: delogo=x=0:y=0:w=100:h=77 ### 39.62 derain Remove the rain in the input image/video by applying the derain methods based on convolutional neural networks. Supported models: * Recurrent Squeeze-and-Excitation Context Aggregation Net (RESCAN). See http://openaccess.thecvf.com/content\_ECCV\_2018/papers/Xia\_Li\_Recurrent\_Squeeze-and-Excitation\_Context\_ECCV\_2018\_paper.pdf. Training as well as model generation scripts are provided in the repository at https://github.com/XueweiMeng/derain\_filter.git. The filter accepts the following options: filter\_type Specify which filter to use. This option accepts the following values: ‘derain’ Derain filter. To conduct derain filter, you need to use a derain model. ‘dehaze’ Dehaze filter. To conduct dehaze filter, you need to use a dehaze model. Default value is ‘derain’. dnn\_backend Specify which DNN backend to use for model loading and execution. This option accepts the following values: ‘tensorflow’ TensorFlow backend. To enable this backend you need to install the TensorFlow for C library (see https://www.tensorflow.org/install/lang\_c) and configure FFmpeg with `--enable-libtensorflow` model Set path to model file specifying network architecture and its parameters. Note that different backends use different file formats. TensorFlow can load files for only its format. To get full functionality (such as async execution), please use the dnn\_processing filter. ### 39.63 deshake Attempt to fix small changes in horizontal and/or vertical shift. This filter helps remove camera shake from hand-holding a camera, bumping a tripod, moving on a vehicle, etc. The filter accepts the following options: x y w h Specify a rectangular area where to limit the search for motion vectors. If desired the search for motion vectors can be limited to a rectangular area of the frame defined by its top left corner, width and height. These parameters have the same meaning as the drawbox filter which can be used to visualise the position of the bounding box. This is useful when simultaneous movement of subjects within the frame might be confused for camera motion by the motion vector search. If any or all of x, y, w and h are set to -1 then the full frame is used. This allows later options to be set without specifying the bounding box for the motion vector search. Default - search the whole frame. rx ry Specify the maximum extent of movement in x and y directions in the range 0-64 pixels. Default 16. edge Specify how to generate pixels to fill blanks at the edge of the frame. Available values are: ‘blank, 0’ Fill zeroes at blank locations ‘original, 1’ Original image at blank locations ‘clamp, 2’ Extruded edge value at blank locations ‘mirror, 3’ Mirrored edge at blank locations Default value is ‘mirror’. blocksize Specify the blocksize to use for motion search. Range 4-128 pixels, default 8. contrast Specify the contrast threshold for blocks. Only blocks with more than the specified contrast (difference between darkest and lightest pixels) will be considered. Range 1-255, default 125. search Specify the search strategy. Available values are: ‘exhaustive, 0’ Set exhaustive search ‘less, 1’ Set less exhaustive search. Default value is ‘exhaustive’. filename If set then a detailed log of the motion search is written to the specified file. ### 39.64 despill Remove unwanted contamination of foreground colors, caused by reflected color of greenscreen or bluescreen. This filter accepts the following options: type Set what type of despill to use. mix Set how spillmap will be generated. expand Set how much to get rid of still remaining spill. red Controls amount of red in spill area. green Controls amount of green in spill area. Should be -1 for greenscreen. blue Controls amount of blue in spill area. Should be -1 for bluescreen. brightness Controls brightness of spill area, preserving colors. alpha Modify alpha from generated spillmap. #### 39.64.1 Commands This filter supports the all above options as commands. ### 39.65 detelecine Apply an exact inverse of the telecine operation. It requires a predefined pattern specified using the pattern option which must be the same as that passed to the telecine filter. This filter accepts the following options: first\_field ‘top, t’ top field first ‘bottom, b’ bottom field first The default value is `top`. pattern A string of numbers representing the pulldown pattern you wish to apply. The default value is `23`. start\_frame A number representing position of the first frame with respect to the telecine pattern. This is to be used if the stream is cut. The default value is `0`. ### 39.66 dilation Apply dilation effect to the video. This filter replaces the pixel by the local(3x3) maximum. It accepts the following options: threshold0 threshold1 threshold2 threshold3 Limit the maximum change for each plane, default is 65535. If 0, plane will remain unchanged. coordinates Flag which specifies the pixel to refer to. Default is 255 i.e. all eight pixels are used. Flags to local 3x3 coordinates maps like this: 1 2 3 4 5 6 7 8 #### 39.66.1 Commands This filter supports the all above options as commands. ### 39.67 displace Displace pixels as indicated by second and third input stream. It takes three input streams and outputs one stream, the first input is the source, and second and third input are displacement maps. The second input specifies how much to displace pixels along the x-axis, while the third input specifies how much to displace pixels along the y-axis. If one of displacement map streams terminates, last frame from that displacement map will be used. Note that once generated, displacements maps can be reused over and over again. A description of the accepted options follows. edge Set displace behavior for pixels that are out of range. Available values are: ‘blank’ Missing pixels are replaced by black pixels. ‘smear’ Adjacent pixels will spread out to replace missing pixels. ‘wrap’ Out of range pixels are wrapped so they point to pixels of other side. ‘mirror’ Out of range pixels will be replaced with mirrored pixels. Default is ‘smear’. #### 39.67.1 Examples * Add ripple effect to rgb input of video size hd720: ffmpeg -i INPUT -f lavfi -i nullsrc=s=hd720,lutrgb=128:128:128 -f lavfi -i nullsrc=s=hd720,geq='r=128+30\*sin(2\*PI\*X/400+T):g=128+30\*sin(2\*PI\*X/400+T):b=128+30\*sin(2\*PI\*X/400+T)' -lavfi '\[0\]\[1\]\[2\]displace' OUTPUT * Add wave effect to rgb input of video size hd720: ffmpeg -i INPUT -f lavfi -i nullsrc=hd720,geq='r=128+80\*(sin(sqrt((X-W/2)\*(X-W/2)+(Y-H/2)\*(Y-H/2))/220\*2\*PI+T)):g=128+80\*(sin(sqrt((X-W/2)\*(X-W/2)+(Y-H/2)\*(Y-H/2))/220\*2\*PI+T)):b=128+80\*(sin(sqrt((X-W/2)\*(X-W/2)+(Y-H/2)\*(Y-H/2))/220\*2\*PI+T))' -lavfi '\[1\]split\[x\]\[y\],\[0\]\[x\]\[y\]displace' OUTPUT ### 39.68 dnn\_classify Do classification with deep neural networks based on bounding boxes. The filter accepts the following options: dnn\_backend Specify which DNN backend to use for model loading and execution. This option accepts only openvino now, tensorflow backends will be added. model Set path to model file specifying network architecture and its parameters. Note that different backends use different file formats. input Set the input name of the dnn network. output Set the output name of the dnn network. confidence Set the confidence threshold (default: 0.5). labels Set path to label file specifying the mapping between label id and name. Each label name is written in one line, tailing spaces and empty lines are skipped. The first line is the name of label id 0, and the second line is the name of label id 1, etc. The label id is considered as name if the label file is not provided. backend\_configs Set the configs to be passed into backend For tensorflow backend, you can set its configs with sess\_config options, please use tools/python/tf\_sess\_config.py to get the configs for your system. ### 39.69 dnn\_detect Do object detection with deep neural networks. The filter accepts the following options: dnn\_backend Specify which DNN backend to use for model loading and execution. This option accepts only openvino now, tensorflow backends will be added. model Set path to model file specifying network architecture and its parameters. Note that different backends use different file formats. input Set the input name of the dnn network. output Set the output name of the dnn network. confidence Set the confidence threshold (default: 0.5). labels Set path to label file specifying the mapping between label id and name. Each label name is written in one line, tailing spaces and empty lines are skipped. The first line is the name of label id 0 (usually it is ’background’), and the second line is the name of label id 1, etc. The label id is considered as name if the label file is not provided. backend\_configs Set the configs to be passed into backend. To use async execution, set async (default: set). Roll back to sync execution if the backend does not support async. ### 39.70 dnn\_processing Do image processing with deep neural networks. It works together with another filter which converts the pixel format of the Frame to what the dnn network requires. The filter accepts the following options: dnn\_backend Specify which DNN backend to use for model loading and execution. This option accepts the following values: ‘tensorflow’ TensorFlow backend. To enable this backend you need to install the TensorFlow for C library (see https://www.tensorflow.org/install/lang\_c) and configure FFmpeg with `--enable-libtensorflow` ‘openvino’ OpenVINO backend. To enable this backend you need to build and install the OpenVINO for C library (see https://github.com/openvinotoolkit/openvino/blob/master/build-instruction.md) and configure FFmpeg with `--enable-libopenvino` (–extra-cflags=-I... –extra-ldflags=-L... might be needed if the header files and libraries are not installed into system path) ‘torch’ Libtorch backend. To enable this backend you need to build and install Libtroch for C++ library. Please download cxx11 ABI version (see https://pytorch.org/get-started/locally) and configure FFmpeg with `--enable-libtorch --extra-cflags=-I/libtorch_root/libtorch/include --extra-cflags=-I/libtorch_root/libtorch/include/torch/csrc/api/include --extra-ldflags=-L/libtorch_root/libtorch/lib/` model Set path to model file specifying network architecture and its parameters. Note that different backends use different file formats. TensorFlow, OpenVINO and Libtorch backend can load files for only its format. input Set the input name of the dnn network. output Set the output name of the dnn network. backend\_configs Set the configs to be passed into backend. To use async execution, set async (default: set). Roll back to sync execution if the backend does not support async. For tensorflow backend, you can set its configs with sess\_config options, please use tools/python/tf\_sess\_config.py to get the configs of TensorFlow backend for your system. #### 39.70.1 Examples * Remove rain in rgb24 frame with can.pb (see derain filter): ./ffmpeg -i rain.jpg -vf format=rgb24,dnn\_processing=dnn\_backend=tensorflow:model=can.pb:input=x:output=y derain.jpg * Handle the Y channel with srcnn.pb (see sr filter) for frame with yuv420p (planar YUV formats supported): ./ffmpeg -i 480p.jpg -vf format=yuv420p,scale=w=iw\*2:h=ih\*2,dnn\_processing=dnn\_backend=tensorflow:model=srcnn.pb:input=x:output=y -y srcnn.jpg * Handle the Y channel with espcn.pb (see sr filter), which changes frame size, for format yuv420p (planar YUV formats supported), please use tools/python/tf\_sess\_config.py to get the configs of TensorFlow backend for your system. ./ffmpeg -i 480p.jpg -vf format=yuv420p,dnn\_processing=dnn\_backend=tensorflow:model=espcn.pb:input=x:output=y:backend\_configs=sess\_config=0x10022805320e09cdccccccccccec3f20012a01303801 -y tmp.espcn.jpg ### 39.71 drawbox Draw a colored box on the input image. It accepts the following parameters: x y The expressions which specify the top left corner coordinates of the box. It defaults to 0. width, w height, h The expressions which specify the width and height of the box; if 0 they are interpreted as the input width and height. It defaults to 0. color, c Specify the color of the box to write. For the general syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. If the special value `invert` is used, the box edge color is the same as the video with inverted luma. thickness, t The expression which sets the thickness of the box edge. A value of `fill` will create a filled box. Default value is `3`. See below for the list of accepted constants. replace Applicable if the input has alpha. With value `1`, the pixels of the painted box will overwrite the video’s color and alpha pixels. Default is `0`, which composites the box onto the input, leaving the video’s alpha intact. The parameters for x, y, w and h and t are expressions containing the following constants: dar The input display aspect ratio, it is the same as (w / h) \* sar. hsub vsub horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. in\_h, ih in\_w, iw The input width and height. sar The input sample aspect ratio. x y The x and y offset coordinates where the box is drawn. w h The width and height of the drawn box. box\_source Box source can be set as side\_data\_detection\_bboxes if you want to use box data in detection bboxes of side data. If box\_source is set, the x, y, width and height will be ignored and still use box data in detection bboxes of side data. So please do not use this parameter if you were not sure about the box source. t The thickness of the drawn box. These constants allow the x, y, w, h and t expressions to refer to each other, so you may for example specify `y=x/dar` or `h=w/dar`. #### 39.71.1 Examples * Draw a black box around the edge of the input image: drawbox * Draw a box with color red and an opacity of 50%: drawbox=10:20:200:60:red@0.5 The previous example can be specified as: drawbox=x=10:y=20:w=200:h=60:color=red@0.5 * Fill the box with pink color: drawbox=x=10:y=10:w=100:h=100:color=pink@0.5:t=fill * Draw a 2-pixel red 2.40:1 mask: drawbox=x=-t:y=0.5\*(ih-iw/2.4)-t:w=iw+t\*2:h=iw/2.4+t\*2:t=2:c=red #### 39.71.2 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.72 drawgraph Draw a graph using input video metadata. It accepts the following parameters: m1 Set 1st frame metadata key from which metadata values will be used to draw a graph. fg1 Set 1st foreground color expression. m2 Set 2nd frame metadata key from which metadata values will be used to draw a graph. fg2 Set 2nd foreground color expression. m3 Set 3rd frame metadata key from which metadata values will be used to draw a graph. fg3 Set 3rd foreground color expression. m4 Set 4th frame metadata key from which metadata values will be used to draw a graph. fg4 Set 4th foreground color expression. min Set minimal value of metadata value. max Set maximal value of metadata value. bg Set graph background color. Default is white. mode Set graph mode. Available values for mode is: ‘bar’ ‘dot’ ‘line’ Default is `line`. slide Set slide mode. Available values for slide is: ‘frame’ Draw new frame when right border is reached. ‘replace’ Replace old columns with new ones. ‘scroll’ Scroll from right to left. ‘rscroll’ Scroll from left to right. ‘picture’ Draw single picture. Default is `frame`. size Set size of graph video. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. The default value is `900x256`. rate, r Set the output frame rate. Default value is `25`. The foreground color expressions can use the following variables: MIN Minimal value of metadata value. MAX Maximal value of metadata value. VAL Current metadata key value. The color is defined as 0xAABBGGRR. Example using metadata from signalstats filter: signalstats,drawgraph=lavfi.signalstats.YAVG:min=0:max=255 Example using metadata from ebur128 filter: ebur128=metadata=1,adrawgraph=lavfi.r128.M:min=-120:max=5 ### 39.73 drawgrid Draw a grid on the input image. It accepts the following parameters: x y The expressions which specify the coordinates of some point of grid intersection (meant to configure offset). Both default to 0. width, w height, h The expressions which specify the width and height of the grid cell, if 0 they are interpreted as the input width and height, respectively, minus `thickness`, so image gets framed. Default to 0. color, c Specify the color of the grid. For the general syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. If the special value `invert` is used, the grid color is the same as the video with inverted luma. thickness, t The expression which sets the thickness of the grid line. Default value is `1`. See below for the list of accepted constants. replace Applicable if the input has alpha. With `1` the pixels of the painted grid will overwrite the video’s color and alpha pixels. Default is `0`, which composites the grid onto the input, leaving the video’s alpha intact. The parameters for x, y, w and h and t are expressions containing the following constants: dar The input display aspect ratio, it is the same as (w / h) \* sar. hsub vsub horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. in\_h, ih in\_w, iw The input grid cell width and height. sar The input sample aspect ratio. x y The x and y coordinates of some point of grid intersection (meant to configure offset). w h The width and height of the drawn cell. t The thickness of the drawn cell. These constants allow the x, y, w, h and t expressions to refer to each other, so you may for example specify `y=x/dar` or `h=w/dar`. #### 39.73.1 Examples * Draw a grid with cell 100x100 pixels, thickness 2 pixels, with color red and an opacity of 50%: drawgrid=width=100:height=100:thickness=2:color=red@0.5 * Draw a white 3x3 grid with an opacity of 50%: drawgrid=w=iw/3:h=ih/3:t=2:c=white@0.5 #### 39.73.2 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.74 drawtext Draw a text string or text from a specified file on top of a video, using the libfreetype library. To enable compilation of this filter, you need to configure FFmpeg with `--enable-libfreetype` and `--enable-libharfbuzz`. To enable default font fallback and the font option you need to configure FFmpeg with `--enable-libfontconfig`. To enable the text\_shaping option, you need to configure FFmpeg with `--enable-libfribidi`. #### 39.74.1 Syntax It accepts the following parameters: box Used to draw a box around text using the background color. The value must be either 1 (enable) or 0 (disable). The default value of box is 0. boxborderw Set the width of the border to be drawn around the box using boxcolor. The value must be specified using one of the following formats: * `boxborderw=10` set the width of all the borders to 10 * `boxborderw=10|20` set the width of the top and bottom borders to 10 and the width of the left and right borders to 20 * `boxborderw=10|20|30` set the width of the top border to 10, the width of the bottom border to 30 and the width of the left and right borders to 20 * `boxborderw=10|20|30|40` set the borders width to 10 (top), 20 (right), 30 (bottom), 40 (left) The default value of boxborderw is "0". boxcolor The color to be used for drawing box around text. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of boxcolor is "white". line\_spacing Set the line spacing in pixels. The default value of line\_spacing is 0. text\_align Set the vertical and horizontal alignment of the text with respect to the box boundaries. The value is combination of flags, one for the vertical alignment (T=top, M=middle, B=bottom) and one for the horizontal alignment (L=left, C=center, R=right). Please note that tab characters are only supported with the left horizontal alignment. y\_align Specify what the y value is referred to. Possible values are: * `text` the top of the highest glyph of the first text line is placed at y * `baseline` the baseline of the first text line is placed at y * `font` the baseline of the first text line is placed at y plus the ascent (in pixels) defined in the font metrics The default value of y\_align is "text" for backward compatibility. borderw Set the width of the border to be drawn around the text using bordercolor. The default value of borderw is 0. bordercolor Set the color to be used for drawing border around text. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of bordercolor is "black". expansion Select how the text is expanded. Can be either `none`, `strftime` (deprecated) or `normal` (default). See the Text expansion section below for details. basetime Set a start time for the count. Value is in microseconds. Only applied in the deprecated `strftime` expansion mode. To emulate in normal expansion mode use the `pts` function, supplying the start time (in seconds) as the second argument. fix\_bounds If true, check and fix text coords to avoid clipping. fontcolor The color to be used for drawing fonts. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of fontcolor is "black". fontcolor\_expr String which is expanded the same way as text to obtain dynamic fontcolor value. By default this option has empty value and is not processed. When this option is set, it overrides fontcolor option. font The font family to be used for drawing text. By default Sans. fontfile The font file to be used for drawing text. The path must be included. This parameter is mandatory if the fontconfig support is disabled. alpha Draw the text applying alpha blending. The value can be a number between 0.0 and 1.0. The expression accepts the same variables x, y as well. The default value is 1. Please see fontcolor\_expr. fontsize The font size to be used for drawing text. The default value of fontsize is 16. text\_shaping If set to 1, attempt to shape the text (for example, reverse the order of right-to-left text and join Arabic characters) before drawing it. Otherwise, just draw the text exactly as given. By default 1 (if supported). ft\_load\_flags The flags to be used for loading the fonts. The flags map the corresponding flags supported by libfreetype, and are a combination of the following values: default no\_scale no\_hinting render no\_bitmap vertical\_layout force\_autohint crop\_bitmap pedantic ignore\_global\_advance\_width no\_recurse ignore\_transform monochrome linear\_design no\_autohint Default value is "default". For more information consult the documentation for the FT\_LOAD\_\* libfreetype flags. shadowcolor The color to be used for drawing a shadow behind the drawn text. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of shadowcolor is "black". boxw Set the width of the box to be drawn around text. The default value of boxw is computed automatically to match the text width boxh Set the height of the box to be drawn around text. The default value of boxh is computed automatically to match the text height shadowx shadowy The x and y offsets for the text shadow position with respect to the position of the text. They can be either positive or negative values. The default value for both is "0". start\_number The starting frame number for the n/frame\_num variable. The default value is "0". tabsize The size in number of spaces to use for rendering the tab. Default value is 4. timecode Set the initial timecode representation in "hh:mm:ss\[:;.\]ff" format. It can be used with or without text parameter. timecode\_rate option must be specified. timecode\_rate, rate, r Set the timecode frame rate (timecode only). Value will be rounded to nearest integer. Minimum value is "1". Drop-frame timecode is supported for frame rates 30 & 60. tc24hmax If set to 1, the output of the timecode option will wrap around at 24 hours. Default is 0 (disabled). text The text string to be drawn. The text must be a sequence of UTF-8 encoded characters. This parameter is mandatory if no file is specified with the parameter textfile. textfile A text file containing text to be drawn. The text must be a sequence of UTF-8 encoded characters. This parameter is mandatory if no text string is specified with the parameter text. If both text and textfile are specified, an error is thrown. text\_source Text source should be set as side\_data\_detection\_bboxes if you want to use text data in detection bboxes of side data. If text source is set, text and textfile will be ignored and still use text data in detection bboxes of side data. So please do not use this parameter if you are not sure about the text source. reload The textfile will be reloaded at specified frame interval. Be sure to update textfile atomically, or it may be read partially, or even fail. Range is 0 to INT\_MAX. Default is 0. x y The expressions which specify the offsets where text will be drawn within the video frame. They are relative to the top/left border of the output image. The default value of x and y is "0". See below for the list of accepted constants and functions. The parameters for x and y are expressions containing the following constants and functions: dar input display aspect ratio, it is the same as (w / h) \* sar hsub vsub horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. line\_h, lh the height of each text line main\_h, h, H the input height main\_w, w, W the input width max\_glyph\_a, ascent the maximum distance from the baseline to the highest/upper grid coordinate used to place a glyph outline point, for all the rendered glyphs. It is a positive value, due to the grid’s orientation with the Y axis upwards. max\_glyph\_d, descent the maximum distance from the baseline to the lowest grid coordinate used to place a glyph outline point, for all the rendered glyphs. This is a negative value, due to the grid’s orientation, with the Y axis upwards. max\_glyph\_h maximum glyph height, that is the maximum height for all the glyphs contained in the rendered text, it is equivalent to ascent - descent. max\_glyph\_w maximum glyph width, that is the maximum width for all the glyphs contained in the rendered text font\_a the ascent size defined in the font metrics font\_d the descent size defined in the font metrics top\_a the maximum ascender of the glyphs of the first text line bottom\_d the maximum descender of the glyphs of the last text line n the number of input frame, starting from 0 rand(min, max) return a random number included between min and max sar The input sample aspect ratio. t timestamp expressed in seconds, NAN if the input timestamp is unknown text\_h, th the height of the rendered text text\_w, tw the width of the rendered text x y the x and y offset coordinates where the text is drawn. These parameters allow the x and y expressions to refer to each other, so you can for example specify `y=x/dar`. pict\_type A one character description of the current frame’s picture type. pkt\_pos The current packet’s position in the input file or stream (in bytes, from the start of the input). A value of -1 indicates this info is not available. duration The current packet’s duration, in seconds. pkt\_size The current packet’s size (in bytes). #### 39.74.2 Text expansion If expansion is set to `strftime`, the filter recognizes sequences accepted by the `strftime` C function in the provided text and expands them accordingly. Check the documentation of `strftime`. This feature is deprecated in favor of `normal` expansion with the `gmtime` or `localtime` expansion functions. If expansion is set to `none`, the text is printed verbatim. If expansion is set to `normal` (which is the default), the following expansion mechanism is used. The backslash character ‘\\’, followed by any character, always expands to the second character. Sequences of the form `%{...}` are expanded. The text between the braces is a function name, possibly followed by arguments separated by ’:’. If the arguments contain special characters or delimiters (’:’ or ’}’), they should be escaped. Note that they probably must also be escaped as the value for the text option in the filter argument string and as the filter argument in the filtergraph description, and possibly also for the shell, that makes up to four levels of escaping; using a text file with the textfile option avoids these problems. The following functions are available: `expr, e` The expression evaluation result. It must take one argument specifying the expression to be evaluated, which accepts the same constants and functions as the x and y values. Note that not all constants should be used, for example the text size is not known when evaluating the expression, so the constants text\_w and text\_h will have an undefined value. `expr_int_format, eif` Evaluate the expression’s value and output as formatted integer. The first argument is the expression to be evaluated, just as for the expr function. The second argument specifies the output format. Allowed values are ‘x’, ‘X’, ‘d’ and ‘u’. They are treated exactly as in the `printf` function. The third parameter is optional and sets the number of positions taken by the output. It can be used to add padding with zeros from the left. `gmtime` The time at which the filter is running, expressed in UTC. It can accept an argument: a `strftime` C function format string. The format string is extended to support the variable %\[1-6\]N which prints fractions of the second with optionally specified number of digits. `localtime` The time at which the filter is running, expressed in the local time zone. It can accept an argument: a `strftime` C function format string. The format string is extended to support the variable %\[1-6\]N which prints fractions of the second with optionally specified number of digits. `metadata` Frame metadata. Takes one or two arguments. The first argument is mandatory and specifies the metadata key. The second argument is optional and specifies a default value, used when the metadata key is not found or empty. Available metadata can be identified by inspecting entries starting with TAG included within each frame section printed by running `ffprobe -show_frames`. String metadata generated in filters leading to the drawtext filter are also available. `n, frame_num` The frame number, starting from 0. `pict_type` A one character description of the current picture type. `pts` The timestamp of the current frame. It can take up to three arguments. The first argument is the format of the timestamp; it defaults to `flt` for seconds as a decimal number with microsecond accuracy; `hms` stands for a formatted \[-\]HH:MM:SS.mmm timestamp with millisecond accuracy. `gmtime` stands for the timestamp of the frame formatted as UTC time; `localtime` stands for the timestamp of the frame formatted as local time zone time. The second argument is an offset added to the timestamp. If the format is set to `hms`, a third argument `24HH` may be supplied to present the hour part of the formatted timestamp in 24h format (00-23). If the format is set to `localtime` or `gmtime`, a third argument may be supplied: a `strftime` C function format string. By default, YYYY-MM-DD HH:MM:SS format will be used. #### 39.74.3 Commands This filter supports altering parameters via commands: reinit Alter existing filter parameters. Syntax for the argument is the same as for filter invocation, e.g. fontsize=56:fontcolor=green:text='Hello World' Full filter invocation with sendcmd would look like this: sendcmd=c='56.0 drawtext reinit fontsize=56\\:fontcolor=green\\:text=Hello\\\\ World' If the entire argument can’t be parsed or applied as valid values then the filter will continue with its existing parameters. The following options are also supported as commands: * x * y * alpha * fontsize * fontcolor * boxcolor * bordercolor * shadowcolor * box * boxw * boxh * boxborderw * line\_spacing * text\_align * shadowx * shadowy * borderw #### 39.74.4 Examples * Draw "Test Text" with font FreeSerif, using the default values for the optional parameters. drawtext="fontfile=/usr/share/fonts/truetype/freefont/FreeSerif.ttf: text='Test Text'" * Draw ’Test Text’ with font FreeSerif of size 24 at position x=100 and y=50 (counting from the top-left corner of the screen), text is yellow with a red box around it. Both the text and the box have an opacity of 20%. drawtext="fontfile=/usr/share/fonts/truetype/freefont/FreeSerif.ttf: text='Test Text':\\ x=100: y=50: fontsize=24: fontcolor=yellow@0.2: box=1: boxcolor=red@0.2" Note that the double quotes are not necessary if spaces are not used within the parameter list. * Show the text at the center of the video frame: drawtext="fontsize=30:fontfile=FreeSerif.ttf:text='hello world':x=(w-text\_w)/2:y=(h-text\_h)/2" * Show the text at a random position, switching to a new position every 30 seconds: drawtext="fontsize=30:fontfile=FreeSerif.ttf:text='hello world':x=if(eq(mod(t\\,30)\\,0)\\,rand(0\\,(w-text\_w))\\,x):y=if(eq(mod(t\\,30)\\,0)\\,rand(0\\,(h-text\_h))\\,y)" * Show a text line sliding from right to left in the last row of the video frame. The file LONG\_LINE is assumed to contain a single line with no newlines. drawtext="fontsize=15:fontfile=FreeSerif.ttf:text=LONG\_LINE:y=h-line\_h:x=-50\*t" * Show the content of file CREDITS off the bottom of the frame and scroll up. drawtext="fontsize=20:fontfile=FreeSerif.ttf:textfile=CREDITS:y=h-20\*t" * Draw a single green letter "g", at the center of the input video. The glyph baseline is placed at half screen height. drawtext="fontsize=60:fontfile=FreeSerif.ttf:fontcolor=green:text=g:x=(w-max\_glyph\_w)/2:y=h/2-ascent" * Show text for 1 second every 3 seconds: drawtext="fontfile=FreeSerif.ttf:fontcolor=white:x=100:y=x/dar:enable=lt(mod(t\\,3)\\,1):text='blink'" * Use fontconfig to set the font. Note that the colons need to be escaped. drawtext='fontfile=Linux Libertine O-40\\\\:style=Semibold:text=FFmpeg' * Draw "Test Text" with font size dependent on height of the video. drawtext="text='Test Text': fontsize=h/30: x=(w-text\_w)/2: y=(h-text\_h\*2)" * Print the date of a real-time encoding (see documentation for the `strftime` C function): drawtext='fontfile=FreeSans.ttf:text=%{localtime\\:%a %b %d %Y}' * Show text fading in and out (appearing/disappearing): #!/bin/sh DS=1.0 # display start DE=10.0 # display end FID=1.5 # fade in duration FOD=5 # fade out duration ffplay -f lavfi "color,drawtext=text=TEST:fontsize=50:fontfile=FreeSerif.ttf:fontcolor\_expr=ff0000%{eif\\\\\\\\: clip(255\*(1\*between(t\\\\, $DS + $FID\\\\, $DE - $FOD) + ((t - $DS)/$FID)\*between(t\\\\, $DS\\\\, $DS + $FID) + (-(t - $DE)/$FOD)\*between(t\\\\, $DE - $FOD\\\\, $DE) )\\\\, 0\\\\, 255) \\\\\\\\: x\\\\\\\\: 2 }" * Horizontally align multiple separate texts. Note that max\_glyph\_a and the fontsize value are included in the y offset. drawtext=fontfile=FreeSans.ttf:text=DOG:fontsize=24:x=10:y=20+24-max\_glyph\_a, drawtext=fontfile=FreeSans.ttf:text=cow:fontsize=24:x=80:y=20+24-max\_glyph\_a * Plot special lavf.image2dec.source\_basename metadata onto each frame if such metadata exists. Otherwise, plot the string "NA". Note that image2 demuxer must have option \-export\_path\_metadata 1 for the special metadata fields to be available for filters. drawtext="fontsize=20:fontcolor=white:fontfile=FreeSans.ttf:text='%{metadata\\:lavf.image2dec.source\_basename\\:NA}':x=10:y=10" For more information about libfreetype, check: http://www.freetype.org/. For more information about fontconfig, check: http://freedesktop.org/software/fontconfig/fontconfig-user.html. For more information about libfribidi, check: http://fribidi.org/. For more information about libharfbuzz, check: https://github.com/harfbuzz/harfbuzz. ### 39.75 edgedetect Detect and draw edges. The filter uses the Canny Edge Detection algorithm. The filter accepts the following options: low high Set low and high threshold values used by the Canny thresholding algorithm. The high threshold selects the "strong" edge pixels, which are then connected through 8-connectivity with the "weak" edge pixels selected by the low threshold. low and high threshold values must be chosen in the range \[0,1\], and low should be lesser or equal to high. Default value for low is `20/255`, and default value for high is `50/255`. mode Define the drawing mode. ‘wires’ Draw white/gray wires on black background. ‘colormix’ Mix the colors to create a paint/cartoon effect. ‘canny’ Apply Canny edge detector on all selected planes. Default value is wires. planes Select planes for filtering. By default all available planes are filtered. #### 39.75.1 Examples * Standard edge detection with custom values for the hysteresis thresholding: edgedetect=low=0.1:high=0.4 * Painting effect without thresholding: edgedetect=mode=colormix:high=0 ### 39.76 elbg Apply a posterize effect using the ELBG (Enhanced LBG) algorithm. For each input image, the filter will compute the optimal mapping from the input to the output given the codebook length, that is the number of distinct output colors. This filter accepts the following options. codebook\_length, l Set codebook length. The value must be a positive integer, and represents the number of distinct output colors. Default value is 256. nb\_steps, n Set the maximum number of iterations to apply for computing the optimal mapping. The higher the value the better the result and the higher the computation time. Default value is 1. seed, s Set a random seed, must be an integer included between 0 and UINT32\_MAX. If not specified, or if explicitly set to -1, the filter will try to use a good random seed on a best effort basis. pal8 Set pal8 output pixel format. This option does not work with codebook length greater than 256. Default is disabled. use\_alpha Include alpha values in the quantization calculation. Allows creating palettized output images (e.g. PNG8) with multiple alpha smooth blending. ### 39.77 entropy Measure graylevel entropy in histogram of color channels of video frames. It accepts the following parameters: mode Can be either normal or diff. Default is normal. diff mode measures entropy of histogram delta values, absolute differences between neighbour histogram values. ### 39.78 epx Apply the EPX magnification filter which is designed for pixel art. It accepts the following option: n Set the scaling dimension: `2` for `2xEPX`, `3` for `3xEPX`. Default is `3`. ### 39.79 eq Set brightness, contrast, saturation and approximate gamma adjustment. The filter accepts the following options: contrast Set the contrast expression. The value must be a float value in range `-1000.0` to `1000.0`. The default value is "1". brightness Set the brightness expression. The value must be a float value in range `-1.0` to `1.0`. The default value is "0". saturation Set the saturation expression. The value must be a float in range `0.0` to `3.0`. The default value is "1". gamma Set the gamma expression. The value must be a float in range `0.1` to `10.0`. The default value is "1". gamma\_r Set the gamma expression for red. The value must be a float in range `0.1` to `10.0`. The default value is "1". gamma\_g Set the gamma expression for green. The value must be a float in range `0.1` to `10.0`. The default value is "1". gamma\_b Set the gamma expression for blue. The value must be a float in range `0.1` to `10.0`. The default value is "1". gamma\_weight Set the gamma weight expression. It can be used to reduce the effect of a high gamma value on bright image areas, e.g. keep them from getting overamplified and just plain white. The value must be a float in range `0.0` to `1.0`. A value of `0.0` turns the gamma correction all the way down while `1.0` leaves it at its full strength. Default is "1". eval Set when the expressions for brightness, contrast, saturation and gamma expressions are evaluated. It accepts the following values: ‘init’ only evaluate expressions once during the filter initialization or when a command is processed ‘frame’ evaluate expressions for each incoming frame Default value is ‘init’. The expressions accept the following parameters: n frame count of the input frame starting from 0 pos byte position of the corresponding packet in the input file, NAN if unspecified; deprecated, do not use r frame rate of the input video, NAN if the input frame rate is unknown t timestamp expressed in seconds, NAN if the input timestamp is unknown #### 39.79.1 Commands The filter supports the following commands: contrast Set the contrast expression. brightness Set the brightness expression. saturation Set the saturation expression. gamma Set the gamma expression. gamma\_r Set the gamma\_r expression. gamma\_g Set gamma\_g expression. gamma\_b Set gamma\_b expression. gamma\_weight Set gamma\_weight expression. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.80 erosion Apply erosion effect to the video. This filter replaces the pixel by the local(3x3) minimum. It accepts the following options: threshold0 threshold1 threshold2 threshold3 Limit the maximum change for each plane, default is 65535. If 0, plane will remain unchanged. coordinates Flag which specifies the pixel to refer to. Default is 255 i.e. all eight pixels are used. Flags to local 3x3 coordinates maps like this: 1 2 3 4 5 6 7 8 #### 39.80.1 Commands This filter supports the all above options as commands. ### 39.81 estdif Deinterlace the input video ("estdif" stands for "Edge Slope Tracing Deinterlacing Filter"). Spatial only filter that uses edge slope tracing algorithm to interpolate missing lines. It accepts the following parameters: mode The interlacing mode to adopt. It accepts one of the following values: frame Output one frame for each frame. field Output one frame for each field. The default value is `field`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: tff Assume the top field is first. bff Assume the bottom field is first. auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: all Deinterlace all frames. interlaced Only deinterlace frames marked as interlaced. The default value is `all`. rslope Specify the search radius for edge slope tracing. Default value is 1. Allowed range is from 1 to 15. redge Specify the search radius for best edge matching. Default value is 2. Allowed range is from 0 to 15. ecost Specify the edge cost for edge matching. Default value is 2. Allowed range is from 0 to 50. mcost Specify the middle cost for edge matching. Default value is 1. Allowed range is from 0 to 50. dcost Specify the distance cost for edge matching. Default value is 1. Allowed range is from 0 to 50. interp Specify the interpolation used. Default is 4-point interpolation. It accepts one of the following values: 2p Two-point interpolation. 4p Four-point interpolation. 6p Six-point interpolation. #### 39.81.1 Commands This filter supports same commands as options. ### 39.82 exposure Adjust exposure of the video stream. The filter accepts the following options: exposure Set the exposure correction in EV. Allowed range is from -3.0 to 3.0 EV Default value is 0 EV. black Set the black level correction. Allowed range is from -1.0 to 1.0. Default value is 0. #### 39.82.1 Commands This filter supports same commands as options. ### 39.83 extractplanes Extract color channel components from input video stream into separate grayscale video streams. The filter accepts the following option: planes Set plane(s) to extract. Available values for planes are: ‘y’ ‘u’ ‘v’ ‘a’ ‘r’ ‘g’ ‘b’ Choosing planes not available in the input will result in an error. That means you cannot select `r`, `g`, `b` planes with `y`, `u`, `v` planes at same time. #### 39.83.1 Examples * Extract luma, u and v color channel component from input video frame into 3 grayscale outputs: ffmpeg -i video.avi -filter\_complex 'extractplanes=y+u+v\[y\]\[u\]\[v\]' -map '\[y\]' y.avi -map '\[u\]' u.avi -map '\[v\]' v.avi ### 39.84 fade Apply a fade-in/out effect to the input video. It accepts the following parameters: type, t The effect type can be either "in" for a fade-in, or "out" for a fade-out effect. Default is `in`. start\_frame, s Specify the number of the frame to start applying the fade effect at. Default is 0. nb\_frames, n The number of frames that the fade effect lasts. At the end of the fade-in effect, the output video will have the same intensity as the input video. At the end of the fade-out transition, the output video will be filled with the selected color. Default is 25. alpha If set to 1, fade only alpha channel, if one exists on the input. Default value is 0. start\_time, st Specify the timestamp (in seconds) of the frame to start to apply the fade effect. If both start\_frame and start\_time are specified, the fade will start at whichever comes last. Default is 0. duration, d The number of seconds for which the fade effect has to last. At the end of the fade-in effect the output video will have the same intensity as the input video, at the end of the fade-out transition the output video will be filled with the selected color. If both duration and nb\_frames are specified, duration is used. Default is 0 (nb\_frames is used by default). color, c Specify the color of the fade. Default is "black". #### 39.84.1 Examples * Fade in the first 30 frames of video: fade=in:0:30 The command above is equivalent to: fade=t=in:s=0:n=30 * Fade out the last 45 frames of a 200-frame video: fade=out:155:45 fade=type=out:start\_frame=155:nb\_frames=45 * Fade in the first 25 frames and fade out the last 25 frames of a 1000-frame video: fade=in:0:25, fade=out:975:25 * Make the first 5 frames yellow, then fade in from frame 5-24: fade=in:5:20:color=yellow * Fade in alpha over first 25 frames of video: fade=in:0:25:alpha=1 * Make the first 5.5 seconds black, then fade in for 0.5 seconds: fade=t=in:st=5.5:d=0.5 ### 39.85 feedback Apply feedback video filter. This filter pass cropped input frames to 2nd output. From there it can be filtered with other video filters. After filter receives frame from 2nd input, that frame is combined on top of original frame from 1st input and passed to 1st output. The typical usage is filter only part of frame. The filter accepts the following options: x y Set the top left crop position. w h Set the crop size. #### 39.85.1 Examples * Blur only top left rectangular part of video frame size 100x100 with gblur filter. \[in\]\[blurin\]feedback=x=0:y=0:w=100:h=100\[out\]\[blurout\];\[blurout\]gblur=8\[blurin\] * Draw black box on top left part of video frame of size 100x100 with drawbox filter. \[in\]\[blurin\]feedback=x=0:y=0:w=100:h=100\[out\]\[blurout\];\[blurout\]drawbox=x=0:y=0:w=100:h=100:t=100\[blurin\] * Pixelize rectangular part of video frame of size 100x100 with pixelize filter. \[in\]\[blurin\]feedback=x=320:y=240:w=100:h=100\[out\]\[blurout\];\[blurout\]pixelize\[blurin\] ### 39.86 fftdnoiz Denoise frames using 3D FFT (frequency domain filtering). The filter accepts the following options: sigma Set the noise sigma constant. This sets denoising strength. Default value is 1. Allowed range is from 0 to 30. Using very high sigma with low overlap may give blocking artifacts. amount Set amount of denoising. By default all detected noise is reduced. Default value is 1. Allowed range is from 0 to 1. block Set size of block in pixels, Default is 32, can be 8 to 256. overlap Set block overlap. Default is 0.5. Allowed range is from 0.2 to 0.8. method Set denoising method. Default is `wiener`, can also be `hard`. prev Set number of previous frames to use for denoising. By default is set to 0. next Set number of next frames to to use for denoising. By default is set to 0. planes Set planes which will be filtered, by default are all available filtered except alpha. ### 39.87 fftfilt Apply arbitrary expressions to samples in frequency domain dc\_Y Adjust the dc value (gain) of the luma plane of the image. The filter accepts an integer value in range `0` to `1000`. The default value is set to `0`. dc\_U Adjust the dc value (gain) of the 1st chroma plane of the image. The filter accepts an integer value in range `0` to `1000`. The default value is set to `0`. dc\_V Adjust the dc value (gain) of the 2nd chroma plane of the image. The filter accepts an integer value in range `0` to `1000`. The default value is set to `0`. weight\_Y Set the frequency domain weight expression for the luma plane. weight\_U Set the frequency domain weight expression for the 1st chroma plane. weight\_V Set the frequency domain weight expression for the 2nd chroma plane. eval Set when the expressions are evaluated. It accepts the following values: ‘init’ Only evaluate expressions once during the filter initialization. ‘frame’ Evaluate expressions for each incoming frame. Default value is ‘init’. The filter accepts the following variables: X Y The coordinates of the current sample. W H The width and height of the image. N The number of input frame, starting from 0. WS HS The size of FFT array for horizontal and vertical processing. #### 39.87.1 Examples * High-pass: fftfilt=dc\_Y=128:weight\_Y='squish(1-(Y+X)/100)' * Low-pass: fftfilt=dc\_Y=0:weight\_Y='squish((Y+X)/100-1)' * Sharpen: fftfilt=dc\_Y=0:weight\_Y='1+squish(1-(Y+X)/100)' * Blur: fftfilt=dc\_Y=0:weight\_Y='exp(-4 \* ((Y+X)/(W+H)))' ### 39.88 field Extract a single field from an interlaced image using stride arithmetic to avoid wasting CPU time. The output frames are marked as non-interlaced. The filter accepts the following options: type Specify whether to extract the top (if the value is `0` or `top`) or the bottom field (if the value is `1` or `bottom`). ### 39.89 fieldhint Create new frames by copying the top and bottom fields from surrounding frames supplied as numbers by the hint file. hint Set file containing hints: absolute/relative frame numbers. There must be one line for each frame in a clip. Each line must contain two numbers separated by the comma, optionally followed by `-` or `+`. Numbers supplied on each line of file can not be out of \[N-1,N+1\] where N is current frame number for `absolute` mode or out of \[-1, 1\] range for `relative` mode. First number tells from which frame to pick up top field and second number tells from which frame to pick up bottom field. If optionally followed by `+` output frame will be marked as interlaced, else if followed by `-` output frame will be marked as progressive, else it will be marked same as input frame. If optionally followed by `t` output frame will use only top field, or in case of `b` it will use only bottom field. If line starts with `#` or `;` that line is skipped. mode Can be item `absolute` or `relative` or `pattern`. Default is `absolute`. The `pattern` mode is same as `relative` mode, except at last entry of file if there are more frames to process than `hint` file is seek back to start. Example of first several lines of `hint` file for `relative` mode: 0,0 - # first frame 1,0 - # second frame, use third's frame top field and second's frame bottom field 1,0 - # third frame, use fourth's frame top field and third's frame bottom field 1,0 - 0,0 - 0,0 - 1,0 - 1,0 - 1,0 - 0,0 - 0,0 - 1,0 - 1,0 - 1,0 - 0,0 - ### 39.90 fieldmatch Field matching filter for inverse telecine. It is meant to reconstruct the progressive frames from a telecined stream. The filter does not drop duplicated frames, so to achieve a complete inverse telecine `fieldmatch` needs to be followed by a decimation filter such as decimate in the filtergraph. The separation of the field matching and the decimation is notably motivated by the possibility of inserting a de-interlacing filter fallback between the two. If the source has mixed telecined and real interlaced content, `fieldmatch` will not be able to match fields for the interlaced parts. But these remaining combed frames will be marked as interlaced, and thus can be de-interlaced by a later filter such as yadif before decimation. In addition to the various configuration options, `fieldmatch` can take an optional second stream, activated through the ppsrc option. If enabled, the frames reconstruction will be based on the fields and frames from this second stream. This allows the first input to be pre-processed in order to help the various algorithms of the filter, while keeping the output lossless (assuming the fields are matched properly). Typically, a field-aware denoiser, or brightness/contrast adjustments can help. Note that this filter uses the same algorithms as TIVTC/TFM (AviSynth project) and VIVTC/VFM (VapourSynth project). The later is a light clone of TFM from which `fieldmatch` is based on. While the semantic and usage are very close, some behaviour and options names can differ. The decimate filter currently only works for constant frame rate input. If your input has mixed telecined (30fps) and progressive content with a lower framerate like 24fps use the following filterchain to produce the necessary cfr stream: `dejudder,fps=30000/1001,fieldmatch,decimate`. The filter accepts the following options: order Specify the assumed field order of the input stream. Available values are: ‘auto’ Auto detect parity (use FFmpeg’s internal parity value). ‘bff’ Assume bottom field first. ‘tff’ Assume top field first. Note that it is sometimes recommended not to trust the parity announced by the stream. Default value is auto. mode Set the matching mode or strategy to use. pc mode is the safest in the sense that it won’t risk creating jerkiness due to duplicate frames when possible, but if there are bad edits or blended fields it will end up outputting combed frames when a good match might actually exist. On the other hand, pcn\_ub mode is the most risky in terms of creating jerkiness, but will almost always find a good frame if there is one. The other values are all somewhere in between pc and pcn\_ub in terms of risking jerkiness and creating duplicate frames versus finding good matches in sections with bad edits, orphaned fields, blended fields, etc. More details about p/c/n/u/b are available in p/c/n/u/b meaning section. Available values are: ‘pc’ 2-way matching (p/c) ‘pc\_n’ 2-way matching, and trying 3rd match if still combed (p/c + n) ‘pc\_u’ 2-way matching, and trying 3rd match (same order) if still combed (p/c + u) ‘pc\_n\_ub’ 2-way matching, trying 3rd match if still combed, and trying 4th/5th matches if still combed (p/c + n + u/b) ‘pcn’ 3-way matching (p/c/n) ‘pcn\_ub’ 3-way matching, and trying 4th/5th matches if all 3 of the original matches are detected as combed (p/c/n + u/b) The parenthesis at the end indicate the matches that would be used for that mode assuming order\=tff (and field on auto or top). In terms of speed pc mode is by far the fastest and pcn\_ub is the slowest. Default value is pc\_n. ppsrc Mark the main input stream as a pre-processed input, and enable the secondary input stream as the clean source to pick the fields from. See the filter introduction for more details. It is similar to the clip2 feature from VFM/TFM. Default value is `0` (disabled). field Set the field to match from. It is recommended to set this to the same value as order unless you experience matching failures with that setting. In certain circumstances changing the field that is used to match from can have a large impact on matching performance. Available values are: ‘auto’ Automatic (same value as order). ‘bottom’ Match from the bottom field. ‘top’ Match from the top field. Default value is auto. mchroma Set whether or not chroma is included during the match comparisons. In most cases it is recommended to leave this enabled. You should set this to `0` only if your clip has bad chroma problems such as heavy rainbowing or other artifacts. Setting this to `0` could also be used to speed things up at the cost of some accuracy. Default value is `1`. y0 y1 These define an exclusion band which excludes the lines between y0 and y1 from being included in the field matching decision. An exclusion band can be used to ignore subtitles, a logo, or other things that may interfere with the matching. y0 sets the starting scan line and y1 sets the ending line; all lines in between y0 and y1 (including y0 and y1) will be ignored. Setting y0 and y1 to the same value will disable the feature. y0 and y1 defaults to `0`. scthresh Set the scene change detection threshold as a percentage of maximum change on the luma plane. Good values are in the `[8.0, 14.0]` range. Scene change detection is only relevant in case combmatch\=sc. The range for scthresh is `[0.0, 100.0]`. Default value is `12.0`. combmatch When combatch is not none, `fieldmatch` will take into account the combed scores of matches when deciding what match to use as the final match. Available values are: ‘none’ No final matching based on combed scores. ‘sc’ Combed scores are only used when a scene change is detected. ‘full’ Use combed scores all the time. Default is sc. combdbg Force `fieldmatch` to calculate the combed metrics for certain matches and print them. This setting is known as micout in TFM/VFM vocabulary. Available values are: ‘none’ No forced calculation. ‘pcn’ Force p/c/n calculations. ‘pcnub’ Force p/c/n/u/b calculations. Default value is none. cthresh This is the area combing threshold used for combed frame detection. This essentially controls how "strong" or "visible" combing must be to be detected. Larger values mean combing must be more visible and smaller values mean combing can be less visible or strong and still be detected. Valid settings are from `-1` (every pixel will be detected as combed) to `255` (no pixel will be detected as combed). This is basically a pixel difference value. A good range is `[8, 12]`. Default value is `9`. chroma Sets whether or not chroma is considered in the combed frame decision. Only disable this if your source has chroma problems (rainbowing, etc.) that are causing problems for the combed frame detection with chroma enabled. Actually, using chroma\=0 is usually more reliable, except for the case where there is chroma only combing in the source. Default value is `0`. blockx blocky Respectively set the x-axis and y-axis size of the window used during combed frame detection. This has to do with the size of the area in which combpel pixels are required to be detected as combed for a frame to be declared combed. See the combpel parameter description for more info. Possible values are any number that is a power of 2 starting at 4 and going up to 512. Default value is `16`. combpel The number of combed pixels inside any of the blocky by blockx size blocks on the frame for the frame to be detected as combed. While cthresh controls how "visible" the combing must be, this setting controls "how much" combing there must be in any localized area (a window defined by the blockx and blocky settings) on the frame. Minimum value is `0` and maximum is `blocky x blockx` (at which point no frames will ever be detected as combed). This setting is known as MI in TFM/VFM vocabulary. Default value is `80`. #### 39.90.1 p/c/n/u/b meaning #### 39.90.1.1 p/c/n We assume the following telecined stream: Top fields: 1 2 2 3 4 Bottom fields: 1 2 3 4 4 The numbers correspond to the progressive frame the fields relate to. Here, the first two frames are progressive, the 3rd and 4th are combed, and so on. When `fieldmatch` is configured to run a matching from bottom (field\=bottom) this is how this input stream get transformed: Input stream: T 1 2 2 3 4 B 1 2 3 4 4 <-- matching reference Matches: c c n n c Output stream: T 1 2 3 4 4 B 1 2 3 4 4 As a result of the field matching, we can see that some frames get duplicated. To perform a complete inverse telecine, you need to rely on a decimation filter after this operation. See for instance the decimate filter. The same operation now matching from top fields (field\=top) looks like this: Input stream: T 1 2 2 3 4 <-- matching reference B 1 2 3 4 4 Matches: c c p p c Output stream: T 1 2 2 3 4 B 1 2 2 3 4 In these examples, we can see what p, c and n mean; basically, they refer to the frame and field of the opposite parity: * p matches the field of the opposite parity in the previous frame * c matches the field of the opposite parity in the current frame * n matches the field of the opposite parity in the next frame #### 39.90.1.2 u/b The u and b matching are a bit special in the sense that they match from the opposite parity flag. In the following examples, we assume that we are currently matching the 2nd frame (Top:2, bottom:2). According to the match, a ’x’ is placed above and below each matched fields. With bottom matching (field\=bottom): Match: c p n b u x x x x x Top 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 Bottom 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 x x x x x Output frames: 2 1 2 2 2 2 2 2 1 3 With top matching (field\=top): Match: c p n b u x x x x x Top 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 Bottom 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 x x x x x Output frames: 2 2 2 1 2 2 1 3 2 2 #### 39.90.2 Examples Simple IVTC of a top field first telecined stream: fieldmatch=order=tff:combmatch=none, decimate Advanced IVTC, with fallback on yadif for still combed frames: fieldmatch=order=tff:combmatch=full, yadif=deint=interlaced, decimate ### 39.91 fieldorder Transform the field order of the input video. It accepts the following parameters: order The output field order. Valid values are tff for top field first or bff for bottom field first. The default value is ‘tff’. The transformation is done by shifting the picture content up or down by one line, and filling the remaining line with appropriate picture content. This method is consistent with most broadcast field order converters. If the input video is not flagged as being interlaced, or it is already flagged as being of the required output field order, then this filter does not alter the incoming video. It is very useful when converting to or from PAL DV material, which is bottom field first. For example: ffmpeg -i in.vob -vf "fieldorder=bff" out.dv ### 39.92 fillborders Fill borders of the input video, without changing video stream dimensions. Sometimes video can have garbage at the four edges and you may not want to crop video input to keep size multiple of some number. This filter accepts the following options: left Number of pixels to fill from left border. right Number of pixels to fill from right border. top Number of pixels to fill from top border. bottom Number of pixels to fill from bottom border. mode Set fill mode. It accepts the following values: ‘smear’ fill pixels using outermost pixels ‘mirror’ fill pixels using mirroring (half sample symmetric) ‘fixed’ fill pixels with constant value ‘reflect’ fill pixels using reflecting (whole sample symmetric) ‘wrap’ fill pixels using wrapping ‘fade’ fade pixels to constant value ‘margins’ fill pixels at top and bottom with weighted averages pixels near borders Default is smear. color Set color for pixels in fixed or fade mode. Default is black. #### 39.92.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.93 find\_rect Find a rectangular object in the input video. The object to search for must be specified as a gray8 image specified with the object option. For each possible match, a score is computed. If the score reaches the specified threshold, the object is considered found. If the input video contains multiple instances of the object, the filter will find only one of them. When an object is found, the following metadata entries are set in the matching frame: lavfi.rect.w width of object lavfi.rect.h height of object lavfi.rect.x x position of object lavfi.rect.y y position of object lavfi.rect.score match score of the found object It accepts the following options: object Filepath of the object image, needs to be in gray8. threshold Detection threshold, expressed as a decimal number in the range 0-1. A threshold value of 0.01 means only exact matches, a threshold of 0.99 means almost everything matches. Default value is 0.5. mipmaps Number of mipmaps, default is 3. xmin, ymin, xmax, ymax Specifies the rectangle in which to search. discard Discard frames where object is not detected. Default is disabled. #### 39.93.1 Examples * Cover a rectangular object by the supplied image of a given video using `ffmpeg`: ffmpeg -i file.ts -vf find\_rect=newref.pgm,cover\_rect=cover.jpg:mode=cover new.mkv * Find the position of an object in each frame using `ffprobe` and write it to a log file: ffprobe -f lavfi movie=test.mp4,find\_rect=object=object.pgm:threshold=0.3 \\ -show\_entries frame=pkt\_pts\_time:frame\_tags=lavfi.rect.x,lavfi.rect.y \\ -of csv -o find\_rect.csv ### 39.94 floodfill Flood area with values of same pixel components with another values. It accepts the following options: x Set pixel x coordinate. y Set pixel y coordinate. s0 Set source #0 component value. s1 Set source #1 component value. s2 Set source #2 component value. s3 Set source #3 component value. d0 Set destination #0 component value. d1 Set destination #1 component value. d2 Set destination #2 component value. d3 Set destination #3 component value. ### 39.95 format Convert the input video to one of the specified pixel formats. Libavfilter will try to pick one that is suitable as input to the next filter. It accepts the following parameters: pix\_fmts A ’|’-separated list of pixel format names, such as "pix\_fmts=yuv420p|monow|rgb24". color\_spaces A ’|’-separated list of color space names, such as "color\_spaces=bt709|bt470bg|bt2020nc". color\_ranges A ’|’-separated list of color range names, such as "color\_ranges=tv|pc". #### 39.95.1 Examples * Convert the input video to the yuv420p format format=pix\_fmts=yuv420p Convert the input video to any of the formats in the list format=pix\_fmts=yuv420p|yuv444p|yuv410p ### 39.96 fps Convert the video to specified constant frame rate by duplicating or dropping frames as necessary. It accepts the following parameters: fps The desired output frame rate. It accepts expressions containing the following constants: ‘source\_fps’ The input’s frame rate ‘ntsc’ NTSC frame rate of `30000/1001` ‘pal’ PAL frame rate of `25.0` ‘film’ Film frame rate of `24.0` ‘ntsc\_film’ NTSC-film frame rate of `24000/1001` The default is `25`. start\_time Assume the first PTS should be the given value, in seconds. This allows for padding/trimming at the start of stream. By default, no assumption is made about the first frame’s expected PTS, so no padding or trimming is done. For example, this could be set to 0 to pad the beginning with duplicates of the first frame if a video stream starts after the audio stream or to trim any frames with a negative PTS. round Timestamp (PTS) rounding method. Possible values are: zero round towards 0 inf round away from 0 down round towards -infinity up round towards +infinity near round to nearest The default is `near`. eof\_action Action performed when reading the last frame. Possible values are: round Use same timestamp rounding method as used for other frames. pass Pass through last frame if input duration has not been reached yet. The default is `round`. Alternatively, the options can be specified as a flat string: fps\[:start\_time\[:round\]\]. See also the setpts filter. #### 39.96.1 Examples * A typical usage in order to set the fps to 25: fps=fps=25 * Sets the fps to 24, using abbreviation and rounding method to round to nearest: fps=fps=film:round=near ### 39.97 framepack Pack two different video streams into a stereoscopic video, setting proper metadata on supported codecs. The two views should have the same size and framerate and processing will stop when the shorter video ends. Please note that you may conveniently adjust view properties with the scale and fps filters. It accepts the following parameters: format The desired packing format. Supported values are: sbs The views are next to each other (default). tab The views are on top of each other. lines The views are packed by line. columns The views are packed by column. frameseq The views are temporally interleaved. Some examples: \# Convert left and right views into a frame-sequential video ffmpeg -i LEFT -i RIGHT -filter\_complex framepack=frameseq OUTPUT # Convert views into a side-by-side video with the same output resolution as the input ffmpeg -i LEFT -i RIGHT -filter\_complex \[0:v\]scale=w=iw/2\[left\],\[1:v\]scale=w=iw/2\[right\],\[left\]\[right\]framepack=sbs OUTPUT ### 39.98 framerate Change the frame rate by interpolating new video output frames from the source frames. This filter is not designed to function correctly with interlaced media. If you wish to change the frame rate of interlaced media then you are required to deinterlace before this filter and re-interlace after this filter. A description of the accepted options follows. fps Specify the output frames per second. This option can also be specified as a value alone. The default is `50`. interp\_start Specify the start of a range where the output frame will be created as a linear interpolation of two frames. The range is \[`0`\-`255`\], the default is `15`. interp\_end Specify the end of a range where the output frame will be created as a linear interpolation of two frames. The range is \[`0`\-`255`\], the default is `240`. scene Specify the level at which a scene change is detected as a value between 0 and 100 to indicate a new scene; a low value reflects a low probability for the current frame to introduce a new scene, while a higher value means the current frame is more likely to be one. The default is `8.2`. flags Specify flags influencing the filter process. Available value for flags is: scene\_change\_detect, scd Enable scene change detection using the value of the option scene. This flag is enabled by default. ### 39.99 framestep Select one frame every N-th frame. This filter accepts the following option: step Select frame after every `step` frames. Allowed values are positive integers higher than 0. Default value is `1`. ### 39.100 freezedetect Detect frozen video. This filter logs a message and sets frame metadata when it detects that the input video has no significant change in content during a specified duration. Video freeze detection calculates the mean average absolute difference of all the components of video frames and compares it to a noise floor. The printed times and duration are expressed in seconds. The `lavfi.freezedetect.freeze_start` metadata key is set on the first frame whose timestamp equals or exceeds the detection duration and it contains the timestamp of the first frame of the freeze. The `lavfi.freezedetect.freeze_duration` and `lavfi.freezedetect.freeze_end` metadata keys are set on the first frame after the freeze. The filter accepts the following options: noise, n Set noise tolerance. Can be specified in dB (in case "dB" is appended to the specified value) or as a difference ratio between 0 and 1. Default is -60dB, or 0.001. duration, d Set freeze duration until notification (default is 2 seconds). ### 39.101 freezeframes Freeze video frames. This filter freezes video frames using frame from 2nd input. The filter accepts the following options: first Set number of first frame from which to start freeze. last Set number of last frame from which to end freeze. replace Set number of frame from 2nd input which will be used instead of replaced frames. ### 39.102 frei0r Apply a frei0r effect to the input video. To enable the compilation of this filter, you need to install the frei0r header and configure FFmpeg with `--enable-frei0r`. It accepts the following parameters: filter\_name The name of the frei0r effect to load. If the environment variable `FREI0R_PATH` is defined, the frei0r effect is searched for in each of the directories specified by the colon-separated list in `FREI0R_PATH`. Otherwise, the standard frei0r paths are searched, in this order: HOME/.frei0r-1/lib/, /usr/local/lib/frei0r-1/, /usr/lib/frei0r-1/. filter\_params A ’|’-separated list of parameters to pass to the frei0r effect. A frei0r effect parameter can be a boolean (its value is either "y" or "n"), a double, a color (specified as R/G/B, where R, G, and B are floating point numbers between 0.0 and 1.0, inclusive) or a color description as specified in the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual, a position (specified as X/Y, where X and Y are floating point numbers) and/or a string. The number and types of parameters depend on the loaded effect. If an effect parameter is not specified, the default value is set. #### 39.102.1 Examples * Apply the distort0r effect, setting the first two double parameters: frei0r=filter\_name=distort0r:filter\_params=0.5|0.01 * Apply the colordistance effect, taking a color as the first parameter: frei0r=colordistance:0.2/0.3/0.4 frei0r=colordistance:violet frei0r=colordistance:0x112233 * Apply the perspective effect, specifying the top left and top right image positions: frei0r=perspective:0.2/0.2|0.8/0.2 For more information, see http://frei0r.dyne.org #### 39.102.2 Commands This filter supports the filter\_params option as commands. ### 39.103 fspp Apply fast and simple postprocessing. It is a faster version of spp. It splits (I)DCT into horizontal/vertical passes. Unlike the simple post- processing filter, one of them is performed once per block, not per pixel. This allows for much higher speed. The filter accepts the following options: quality Set quality. This option defines the number of levels for averaging. It accepts an integer in the range 4-5. Default value is `4`. qp Force a constant quantization parameter. It accepts an integer in range 0-63. If not set, the filter will use the QP from the video stream (if available). strength Set filter strength. It accepts an integer in range -15 to 32. Lower values mean more details but also more artifacts, while higher values make the image smoother but also blurrier. Default value is `0` − PSNR optimal. use\_bframe\_qp Enable the use of the QP from the B-Frames if set to `1`. Using this option may cause flicker since the B-Frames have often larger QP. Default is `0` (not enabled). ### 39.104 fsync Synchronize video frames with an external mapping from a file. For each input PTS given in the map file it either drops or creates as many frames as necessary to recreate the sequence of output frames given in the map file. This filter is useful to recreate the output frames of a framerate conversion by the fps filter, recorded into a map file using the ffmpeg option `-stats_mux_pre`, and do further processing to the corresponding frames e.g. quality comparison. Each line of the map file must contain three items per input frame, the input PTS (decimal), the output PTS (decimal) and the output TIMEBASE (decimal/decimal), seperated by a space. This file format corresponds to the output of `-stats_mux_pre_fmt="{ptsi} {pts} {tb}"`. The filter assumes the map file is sorted by increasing input PTS. The filter accepts the following options: file, f The filename of the map file to be used. Example: \# Convert a video to 25 fps and record a MAP\_FILE file with the default format of this filter ffmpeg -i INPUT -vf fps=fps=25 -stats\_mux\_pre MAP\_FILE -stats\_mux\_pre\_fmt "{ptsi} {pts} {tb}" OUTPUT # Sort MAP\_FILE by increasing input PTS sort -n MAP\_FILE # Use INPUT, OUTPUT and the MAP\_FILE from above to compare the corresponding frames in INPUT and OUTPUT via SSIM ffmpeg -i INPUT -i OUTPUT -filter\_complex '\[0:v\]fsync=file=MAP\_FILE\[ref\];\[1:v\]\[ref\]ssim' -f null - ### 39.105 gblur Apply Gaussian blur filter. The filter accepts the following options: sigma Set horizontal sigma, standard deviation of Gaussian blur. Default is `0.5`. steps Set number of steps for Gaussian approximation. Default is `1`. planes Set which planes to filter. By default all planes are filtered. sigmaV Set vertical sigma, if negative it will be same as `sigma`. Default is `-1`. #### 39.105.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.106 geq Apply generic equation to each pixel. The filter accepts the following options: lum\_expr, lum Set the luma expression. cb\_expr, cb Set the chrominance blue expression. cr\_expr, cr Set the chrominance red expression. alpha\_expr, a Set the alpha expression. red\_expr, r Set the red expression. green\_expr, g Set the green expression. blue\_expr, b Set the blue expression. The colorspace is selected according to the specified options. If one of the lum\_expr, cb\_expr, or cr\_expr options is specified, the filter will automatically select a YCbCr colorspace. If one of the red\_expr, green\_expr, or blue\_expr options is specified, it will select an RGB colorspace. If one of the chrominance expression is not defined, it falls back on the other one. If no alpha expression is specified it will evaluate to opaque value. If none of chrominance expressions are specified, they will evaluate to the luma expression. The expressions can use the following variables and functions: N The sequential number of the filtered frame, starting from `0`. X Y The coordinates of the current sample. W H The width and height of the image. SW SH Width and height scale depending on the currently filtered plane. It is the ratio between the corresponding luma plane number of pixels and the current plane ones. E.g. for YUV4:2:0 the values are `1,1` for the luma plane, and `0.5,0.5` for chroma planes. T Time of the current frame, expressed in seconds. p(x, y) Return the value of the pixel at location (x,y) of the current plane. lum(x, y) Return the value of the pixel at location (x,y) of the luma plane. cb(x, y) Return the value of the pixel at location (x,y) of the blue-difference chroma plane. Return 0 if there is no such plane. cr(x, y) Return the value of the pixel at location (x,y) of the red-difference chroma plane. Return 0 if there is no such plane. r(x, y) g(x, y) b(x, y) Return the value of the pixel at location (x,y) of the red/green/blue component. Return 0 if there is no such component. alpha(x, y) Return the value of the pixel at location (x,y) of the alpha plane. Return 0 if there is no such plane. psum(x,y), lumsum(x, y), cbsum(x,y), crsum(x,y), rsum(x,y), gsum(x,y), bsum(x,y), alphasum(x,y) Sum of sample values in the rectangle from (0,0) to (x,y), this allows obtaining sums of samples within a rectangle. See the functions without the sum postfix. interpolation Set one of interpolation methods: nearest, n bilinear, b Default is bilinear. For functions, if x and y are outside the area, the value will be automatically clipped to the closer edge. Please note that this filter can use multiple threads in which case each slice will have its own expression state. If you want to use only a single expression state because your expressions depend on previous state then you should limit the number of filter threads to 1. #### 39.106.1 Examples * Flip the image horizontally: geq=p(W-X\\,Y) * Generate a bidimensional sine wave, with angle `PI/3` and a wavelength of 100 pixels: geq=128 + 100\*sin(2\*(PI/100)\*(cos(PI/3)\*(X-50\*T) + sin(PI/3)\*Y)):128:128 * Generate a fancy enigmatic moving light: nullsrc=s=256x256,geq=random(1)/hypot(X-cos(N\*0.07)\*W/2-W/2\\,Y-sin(N\*0.09)\*H/2-H/2)^2\*1000000\*sin(N\*0.02):128:128 * Generate a quick emboss effect: format=gray,geq=lum\_expr='(p(X,Y)+(256-p(X-4,Y-4)))/2' * Modify RGB components depending on pixel position: geq=r='X/W\*r(X,Y)':g='(1-X/W)\*g(X,Y)':b='(H-Y)/H\*b(X,Y)' * Create a radial gradient that is the same size as the input (also see the vignette filter): geq=lum=255\*gauss((X/W-0.5)\*3)\*gauss((Y/H-0.5)\*3)/gauss(0)/gauss(0),format=gray ### 39.107 gradfun Fix the banding artifacts that are sometimes introduced into nearly flat regions by truncation to 8-bit color depth. Interpolate the gradients that should go where the bands are, and dither them. It is designed for playback only. Do not use it prior to lossy compression, because compression tends to lose the dither and bring back the bands. It accepts the following parameters: strength The maximum amount by which the filter will change any one pixel. This is also the threshold for detecting nearly flat regions. Acceptable values range from .51 to 64; the default value is 1.2. Out-of-range values will be clipped to the valid range. radius The neighborhood to fit the gradient to. A larger radius makes for smoother gradients, but also prevents the filter from modifying the pixels near detailed regions. Acceptable values are 8-32; the default value is 16. Out-of-range values will be clipped to the valid range. Alternatively, the options can be specified as a flat string: strength\[:radius\] #### 39.107.1 Examples * Apply the filter with a `3.5` strength and radius of `8`: gradfun=3.5:8 * Specify radius, omitting the strength (which will fall-back to the default value): gradfun=radius=8 ### 39.108 graphmonitor Show various filtergraph stats. With this filter one can debug complete filtergraph. Especially issues with links filling with queued frames. The filter accepts the following options: size, s Set video output size. Default is hd720. opacity, o Set video opacity. Default is 0.9. Allowed range is from 0 to 1. mode, m Set output mode flags. Available values for flags are: ‘full’ No any filtering. Default. ‘compact’ Show only filters with queued frames. ‘nozero’ Show only filters with non-zero stats. ‘noeof’ Show only filters with non-eof stat. ‘nodisabled’ Show only filters that are enabled in timeline. flags, f Set flags which enable which stats are shown in video. Available values for flags are: ‘none’ All flags turned off. ‘all’ All flags turned on. ‘queue’ Display number of queued frames in each link. ‘frame\_count\_in’ Display number of frames taken from filter. ‘frame\_count\_out’ Display number of frames given out from filter. ‘frame\_count\_delta’ Display delta number of frames between above two values. ‘pts’ Display current filtered frame pts. ‘pts\_delta’ Display pts delta between current and previous frame. ‘time’ Display current filtered frame time. ‘time\_delta’ Display time delta between current and previous frame. ‘timebase’ Display time base for filter link. ‘format’ Display used format for filter link. ‘size’ Display video size or number of audio channels in case of audio used by filter link. ‘rate’ Display video frame rate or sample rate in case of audio used by filter link. ‘eof’ Display link output status. ‘sample\_count\_in’ Display number of samples taken from filter. ‘sample\_count\_out’ Display number of samples given out from filter. ‘sample\_count\_delta’ Display delta number of samples between above two values. ‘disabled’ Show the timeline filter status. rate, r Set upper limit for video rate of output stream, Default value is 25. This guarantee that output video frame rate will not be higher than this value. ### 39.109 grayworld A color constancy filter that applies color correction based on the grayworld assumption See: https://www.researchgate.net/publication/275213614\_A\_New\_Color\_Correction\_Method\_for\_Underwater\_Imaging The algorithm uses linear light, so input data should be linearized beforehand (and possibly correctly tagged). ffmpeg -i INPUT -vf zscale=transfer=linear,grayworld,zscale=transfer=bt709,format=yuv420p OUTPUT ### 39.110 greyedge A color constancy variation filter which estimates scene illumination via grey edge algorithm and corrects the scene colors accordingly. See: https://staff.science.uva.nl/th.gevers/pub/GeversTIP07.pdf The filter accepts the following options: difford The order of differentiation to be applied on the scene. Must be chosen in the range \[0,2\] and default value is 1. minknorm The Minkowski parameter to be used for calculating the Minkowski distance. Must be chosen in the range \[0,20\] and default value is 1. Set to 0 for getting max value instead of calculating Minkowski distance. sigma The standard deviation of Gaussian blur to be applied on the scene. Must be chosen in the range \[0,1024.0\] and default value = 1. floor( sigma \* break\_off\_sigma(3) ) can’t be equal to 0 if difford is greater than 0. #### 39.110.1 Examples * Grey Edge: greyedge=difford=1:minknorm=5:sigma=2 * Max Edge: greyedge=difford=1:minknorm=0:sigma=2 ### 39.111 guided Apply guided filter for edge-preserving smoothing, dehazing and so on. The filter accepts the following options: radius Set the box radius in pixels. Allowed range is 1 to 20. Default is 3. eps Set regularization parameter (with square). Allowed range is 0 to 1. Default is 0.01. mode Set filter mode. Can be `basic` or `fast`. Default is `basic`. sub Set subsampling ratio for `fast` mode. Range is 2 to 64. Default is 4. No subsampling occurs in `basic` mode. guidance Set guidance mode. Can be `off` or `on`. Default is `off`. If `off`, single input is required. If `on`, two inputs of the same resolution and pixel format are required. The second input serves as the guidance. planes Set planes to filter. Default is first only. #### 39.111.1 Commands This filter supports the all above options as commands. #### 39.111.2 Examples * Edge-preserving smoothing with guided filter: ffmpeg -i in.png -vf guided out.png * Dehazing, structure-transferring filtering, detail enhancement with guided filter. For the generation of guidance image, refer to paper "Guided Image Filtering". See: http://kaiminghe.com/publications/pami12guidedfilter.pdf. ffmpeg -i in.png -i guidance.png -filter\_complex guided=guidance=on out.png ### 39.112 haldclut Apply a Hald CLUT to a video stream. First input is the video stream to process, and second one is the Hald CLUT. The Hald CLUT input can be a simple picture or a complete video stream. The filter accepts the following options: clut Set which CLUT video frames will be processed from second input stream, can be first or all. Default is all. shortest Force termination when the shortest input terminates. Default is `0`. repeatlast Continue applying the last CLUT after the end of the stream. A value of `0` disable the filter after the last frame of the CLUT is reached. Default is `1`. `haldclut` also has the same interpolation options as lut3d (both filters share the same internals). This filter also supports the framesync options. More information about the Hald CLUT can be found on Eskil Steenberg’s website (Hald CLUT author) at http://www.quelsolaar.com/technology/clut.html. #### 39.112.1 Commands This filter supports the `interp` option as commands. #### 39.112.2 Workflow examples #### 39.112.2.1 Hald CLUT video stream Generate an identity Hald CLUT stream altered with various effects: ffmpeg -f lavfi -i haldclutsrc\=8 -vf "hue=H=2\*PI\*t:s=sin(2\*PI\*t)+1, curves=cross\_process" -t 10 -c:v ffv1 clut.nut Note: make sure you use a lossless codec. Then use it with `haldclut` to apply it on some random stream: ffmpeg -f lavfi -i mandelbrot -i clut.nut -filter\_complex '\[0\]\[1\] haldclut' -t 20 mandelclut.mkv The Hald CLUT will be applied to the 10 first seconds (duration of clut.nut), then the latest picture of that CLUT stream will be applied to the remaining frames of the `mandelbrot` stream. #### 39.112.2.2 Hald CLUT with preview A Hald CLUT is supposed to be a squared image of `Level*Level*Level` by `Level*Level*Level` pixels. For a given Hald CLUT, FFmpeg will select the biggest possible square starting at the top left of the picture. The remaining padding pixels (bottom or right) will be ignored. This area can be used to add a preview of the Hald CLUT. Typically, the following generated Hald CLUT will be supported by the `haldclut` filter: ffmpeg -f lavfi -i haldclutsrc\=8 -vf " pad=iw+320 \[padded\_clut\]; smptebars=s=320x256, split \[a\]\[b\]; \[padded\_clut\]\[a\] overlay=W-320:h, curves=color\_negative \[main\]; \[main\]\[b\] overlay=W-320" -frames:v 1 clut.png It contains the original and a preview of the effect of the CLUT: SMPTE color bars are displayed on the right-top, and below the same color bars processed by the color changes. Then, the effect of this Hald CLUT can be visualized with: ffplay input.mkv -vf "movie=clut.png, \[in\] haldclut" ### 39.113 hflip Flip the input video horizontally. For example, to horizontally flip the input video with `ffmpeg`: ffmpeg -i in.avi -vf "hflip" out.avi ### 39.114 histeq This filter applies a global color histogram equalization on a per-frame basis. It can be used to correct video that has a compressed range of pixel intensities. The filter redistributes the pixel intensities to equalize their distribution across the intensity range. It may be viewed as an "automatically adjusting contrast filter". This filter is useful only for correcting degraded or poorly captured source video. The filter accepts the following options: strength Determine the amount of equalization to be applied. As the strength is reduced, the distribution of pixel intensities more-and-more approaches that of the input frame. The value must be a float number in the range \[0,1\] and defaults to 0.200. intensity Set the maximum intensity that can generated and scale the output values appropriately. The strength should be set as desired and then the intensity can be limited if needed to avoid washing-out. The value must be a float number in the range \[0,1\] and defaults to 0.210. antibanding Set the antibanding level. If enabled the filter will randomly vary the luminance of output pixels by a small amount to avoid banding of the histogram. Possible values are `none`, `weak` or `strong`. It defaults to `none`. ### 39.115 histogram Compute and draw a color distribution histogram for the input video. The computed histogram is a representation of the color component distribution in an image. Standard histogram displays the color components distribution in an image. Displays color graph for each color component. Shows distribution of the Y, U, V, A or R, G, B components, depending on input format, in the current frame. Below each graph a color component scale meter is shown. The filter accepts the following options: level\_height Set height of level. Default value is `200`. Allowed range is \[50, 2048\]. scale\_height Set height of color scale. Default value is `12`. Allowed range is \[0, 40\]. display\_mode Set display mode. It accepts the following values: ‘stack’ Per color component graphs are placed below each other. ‘parade’ Per color component graphs are placed side by side. ‘overlay’ Presents information identical to that in the `parade`, except that the graphs representing color components are superimposed directly over one another. Default is `stack`. levels\_mode Set mode. Can be either `linear`, or `logarithmic`. Default is `linear`. components Set what color components to display. Default is `7`. fgopacity Set foreground opacity. Default is `0.7`. bgopacity Set background opacity. Default is `0.5`. colors\_mode Set colors mode. It accepts the following values: ‘whiteonblack’ ‘blackonwhite’ ‘whiteongray’ ‘blackongray’ ‘coloronblack’ ‘coloronwhite’ ‘colorongray’ ‘blackoncolor’ ‘whiteoncolor’ ‘grayoncolor’ Default is `whiteonblack`. #### 39.115.1 Examples * Calculate and draw histogram: ffplay -i input -vf histogram ### 39.116 hqdn3d This is a high precision/quality 3d denoise filter. It aims to reduce image noise, producing smooth images and making still images really still. It should enhance compressibility. It accepts the following optional parameters: luma\_spatial A non-negative floating point number which specifies spatial luma strength. It defaults to 4.0. chroma\_spatial A non-negative floating point number which specifies spatial chroma strength. It defaults to 3.0\*luma\_spatial/4.0. luma\_tmp A floating point number which specifies luma temporal strength. It defaults to 6.0\*luma\_spatial/4.0. chroma\_tmp A floating point number which specifies chroma temporal strength. It defaults to luma\_tmp\*chroma\_spatial/luma\_spatial. #### 39.116.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.117 hwdownload Download hardware frames to system memory. The input must be in hardware frames, and the output a non-hardware format. Not all formats will be supported on the output - it may be necessary to insert an additional format filter immediately following in the graph to get the output in a supported format. ### 39.118 hwmap Map hardware frames to system memory or to another device. This filter has several different modes of operation; which one is used depends on the input and output formats: * Hardware frame input, normal frame output Map the input frames to system memory and pass them to the output. If the original hardware frame is later required (for example, after overlaying something else on part of it), the hwmap filter can be used again in the next mode to retrieve it. * Normal frame input, hardware frame output If the input is actually a software-mapped hardware frame, then unmap it - that is, return the original hardware frame. Otherwise, a device must be provided. Create new hardware surfaces on that device for the output, then map them back to the software format at the input and give those frames to the preceding filter. This will then act like the hwupload filter, but may be able to avoid an additional copy when the input is already in a compatible format. * Hardware frame input and output A device must be supplied for the output, either directly or with the derive\_device option. The input and output devices must be of different types and compatible - the exact meaning of this is system-dependent, but typically it means that they must refer to the same underlying hardware context (for example, refer to the same graphics card). If the input frames were originally created on the output device, then unmap to retrieve the original frames. Otherwise, map the frames to the output device - create new hardware frames on the output corresponding to the frames on the input. The following additional parameters are accepted: mode Set the frame mapping mode. Some combination of: read The mapped frame should be readable. write The mapped frame should be writeable. overwrite The mapping will always overwrite the entire frame. This may improve performance in some cases, as the original contents of the frame need not be loaded. direct The mapping must not involve any copying. Indirect mappings to copies of frames are created in some cases where either direct mapping is not possible or it would have unexpected properties. Setting this flag ensures that the mapping is direct and will fail if that is not possible. Defaults to read+write if not specified. derive\_device type Rather than using the device supplied at initialisation, instead derive a new device of type type from the device the input frames exist on. reverse In a hardware to hardware mapping, map in reverse - create frames in the sink and map them back to the source. This may be necessary in some cases where a mapping in one direction is required but only the opposite direction is supported by the devices being used. This option is dangerous - it may break the preceding filter in undefined ways if there are any additional constraints on that filter’s output. Do not use it without fully understanding the implications of its use. ### 39.119 hwupload Upload system memory frames to hardware surfaces. The device to upload to must be supplied when the filter is initialised. If using ffmpeg, select the appropriate device with the \-filter\_hw\_device option or with the derive\_device option. The input and output devices must be of different types and compatible - the exact meaning of this is system-dependent, but typically it means that they must refer to the same underlying hardware context (for example, refer to the same graphics card). The following additional parameters are accepted: derive\_device type Rather than using the device supplied at initialisation, instead derive a new device of type type from the device the input frames exist on. ### 39.120 hwupload\_cuda Upload system memory frames to a CUDA device. It accepts the following optional parameters: device The number of the CUDA device to use ### 39.121 hqx Apply a high-quality magnification filter designed for pixel art. This filter was originally created by Maxim Stepin. It accepts the following option: n Set the scaling dimension: `2` for `hq2x`, `3` for `hq3x` and `4` for `hq4x`. Default is `3`. ### 39.122 hstack Stack input videos horizontally. All streams must be of same pixel format and of same height. Note that this filter is faster than using overlay and pad filter to create same output. The filter accepts the following option: inputs Set number of input streams. Default is 2. shortest If set to 1, force the output to terminate when the shortest input terminates. Default value is 0. ### 39.123 hsvhold Turns a certain HSV range into gray values. This filter measures color difference between set HSV color in options and ones measured in video stream. Depending on options, output colors can be changed to be gray or not. The filter accepts the following options: hue Set the hue value which will be used in color difference calculation. Allowed range is from -360 to 360. Default value is 0. sat Set the saturation value which will be used in color difference calculation. Allowed range is from -1 to 1. Default value is 0. val Set the value which will be used in color difference calculation. Allowed range is from -1 to 1. Default value is 0. similarity Set similarity percentage with the key color. Allowed range is from 0 to 1. Default value is 0.01. 0.00001 matches only the exact key color, while 1.0 matches everything. blend Blend percentage. Allowed range is from 0 to 1. Default value is 0. 0.0 makes pixels either fully gray, or not gray at all. Higher values result in more gray pixels, with a higher gray pixel the more similar the pixels color is to the key color. ### 39.124 hsvkey Turns a certain HSV range into transparency. This filter measures color difference between set HSV color in options and ones measured in video stream. Depending on options, output colors can be changed to transparent by adding alpha channel. The filter accepts the following options: hue Set the hue value which will be used in color difference calculation. Allowed range is from -360 to 360. Default value is 0. sat Set the saturation value which will be used in color difference calculation. Allowed range is from -1 to 1. Default value is 0. val Set the value which will be used in color difference calculation. Allowed range is from -1 to 1. Default value is 0. similarity Set similarity percentage with the key color. Allowed range is from 0 to 1. Default value is 0.01. 0.00001 matches only the exact key color, while 1.0 matches everything. blend Blend percentage. Allowed range is from 0 to 1. Default value is 0. 0.0 makes pixels either fully transparent, or not transparent at all. Higher values result in semi-transparent pixels, with a higher transparency the more similar the pixels color is to the key color. ### 39.125 hue Modify the hue and/or the saturation of the input. It accepts the following parameters: h Specify the hue angle as a number of degrees. It accepts an expression, and defaults to "0". s Specify the saturation in the \[-10,10\] range. It accepts an expression and defaults to "1". H Specify the hue angle as a number of radians. It accepts an expression, and defaults to "0". b Specify the brightness in the \[-10,10\] range. It accepts an expression and defaults to "0". h and H are mutually exclusive, and can’t be specified at the same time. The b, h, H and s option values are expressions containing the following constants: n frame count of the input frame starting from 0 pts presentation timestamp of the input frame expressed in time base units r frame rate of the input video, NAN if the input frame rate is unknown t timestamp expressed in seconds, NAN if the input timestamp is unknown tb time base of the input video #### 39.125.1 Examples * Set the hue to 90 degrees and the saturation to 1.0: hue=h=90:s=1 * Same command but expressing the hue in radians: hue=H=PI/2:s=1 * Rotate hue and make the saturation swing between 0 and 2 over a period of 1 second: hue="H=2\*PI\*t: s=sin(2\*PI\*t)+1" * Apply a 3 seconds saturation fade-in effect starting at 0: hue="s=min(t/3\\,1)" The general fade-in expression can be written as: hue="s=min(0\\, max((t-START)/DURATION\\, 1))" * Apply a 3 seconds saturation fade-out effect starting at 5 seconds: hue="s=max(0\\, min(1\\, (8-t)/3))" The general fade-out expression can be written as: hue="s=max(0\\, min(1\\, (START+DURATION-t)/DURATION))" #### 39.125.2 Commands This filter supports the following commands: b s h H Modify the hue and/or the saturation and/or brightness of the input video. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.126 huesaturation Apply hue-saturation-intensity adjustments to input video stream. This filter operates in RGB colorspace. This filter accepts the following options: hue Set the hue shift in degrees to apply. Default is 0. Allowed range is from -180 to 180. saturation Set the saturation shift. Default is 0. Allowed range is from -1 to 1. intensity Set the intensity shift. Default is 0. Allowed range is from -1 to 1. colors Set which primary and complementary colors are going to be adjusted. This options is set by providing one or multiple values. This can select multiple colors at once. By default all colors are selected. ‘r’ Adjust reds. ‘y’ Adjust yellows. ‘g’ Adjust greens. ‘c’ Adjust cyans. ‘b’ Adjust blues. ‘m’ Adjust magentas. ‘a’ Adjust all colors. strength Set strength of filtering. Allowed range is from 0 to 100. Default value is 1. rw, gw, bw Set weight for each RGB component. Allowed range is from 0 to 1. By default is set to 0.333, 0.334, 0.333. Those options are used in saturation and lightess processing. lightness Set preserving lightness, by default is disabled. Adjusting hues can change lightness from original RGB triplet, with this option enabled lightness is kept at same value. ### 39.127 hysteresis Grow first stream into second stream by connecting components. This makes it possible to build more robust edge masks. This filter accepts the following options: planes Set which planes will be processed as bitmap, unprocessed planes will be copied from first stream. By default value 0xf, all planes will be processed. threshold Set threshold which is used in filtering. If pixel component value is higher than this value filter algorithm for connecting components is activated. By default value is 0. The `hysteresis` filter also supports the framesync options. ### 39.128 iccdetect Detect the colorspace from an embedded ICC profile (if present), and update the frame’s tags accordingly. This filter accepts the following options: force If true, the frame’s existing colorspace tags will always be overridden by values detected from an ICC profile. Otherwise, they will only be assigned if they contain `unknown`. Enabled by default. ### 39.129 iccgen Generate ICC profiles and attach them to frames. This filter accepts the following options: color\_primaries color\_trc Configure the colorspace that the ICC profile will be generated for. The default value of `auto` infers the value from the input frame’s metadata, defaulting to BT.709/sRGB as appropriate. See the setparams filter for a list of possible values, but note that `unknown` are not valid values for this filter. force If true, an ICC profile will be generated even if it would overwrite an already existing ICC profile. Disabled by default. ### 39.130 identity Obtain the identity score between two input videos. This filter takes two input videos. Both input videos must have the same resolution and pixel format for this filter to work correctly. Also it assumes that both inputs have the same number of frames, which are compared one by one. The obtained per component, average, min and max identity score is printed through the logging system. The filter stores the calculated identity scores of each frame in frame metadata. This filter also supports the framesync options. In the below example the input file main.mpg being processed is compared with the reference file ref.mpg. ffmpeg -i main.mpg -i ref.mpg -lavfi identity -f null - ### 39.131 idet Detect video interlacing type. This filter tries to detect if the input frames are interlaced, progressive, top or bottom field first. It will also try to detect fields that are repeated between adjacent frames (a sign of telecine). Single frame detection considers only immediately adjacent frames when classifying each frame. Multiple frame detection incorporates the classification history of previous frames. The filter will log these metadata values: single.current\_frame Detected type of current frame using single-frame detection. One of: “tff” (top field first), “bff” (bottom field first), “progressive”, or “undetermined” single.tff Cumulative number of frames detected as top field first using single-frame detection. multiple.tff Cumulative number of frames detected as top field first using multiple-frame detection. single.bff Cumulative number of frames detected as bottom field first using single-frame detection. multiple.current\_frame Detected type of current frame using multiple-frame detection. One of: “tff” (top field first), “bff” (bottom field first), “progressive”, or “undetermined” multiple.bff Cumulative number of frames detected as bottom field first using multiple-frame detection. single.progressive Cumulative number of frames detected as progressive using single-frame detection. multiple.progressive Cumulative number of frames detected as progressive using multiple-frame detection. single.undetermined Cumulative number of frames that could not be classified using single-frame detection. multiple.undetermined Cumulative number of frames that could not be classified using multiple-frame detection. repeated.current\_frame Which field in the current frame is repeated from the last. One of “neither”, “top”, or “bottom”. repeated.neither Cumulative number of frames with no repeated field. repeated.top Cumulative number of frames with the top field repeated from the previous frame’s top field. repeated.bottom Cumulative number of frames with the bottom field repeated from the previous frame’s bottom field. The filter accepts the following options: intl\_thres Set interlacing threshold. prog\_thres Set progressive threshold. rep\_thres Threshold for repeated field detection. half\_life Number of frames after which a given frame’s contribution to the statistics is halved (i.e., it contributes only 0.5 to its classification). The default of 0 means that all frames seen are given full weight of 1.0 forever. analyze\_interlaced\_flag When this is not 0 then idet will use the specified number of frames to determine if the interlaced flag is accurate, it will not count undetermined frames. If the flag is found to be accurate it will be used without any further computations, if it is found to be inaccurate it will be cleared without any further computations. This allows inserting the idet filter as a low computational method to clean up the interlaced flag #### 39.131.1 Examples Inspect the field order of the first 360 frames in a video, in verbose detail: ffmpeg -i INPUT -filter:v idet,metadata=mode=print -frames:v 360 -an -f null - The idet filter will add analysis metadata to each frame, which will then be discarded. At the end, the filter will also print a final report with statistics. ### 39.132 il Deinterleave or interleave fields. This filter allows one to process interlaced images fields without deinterlacing them. Deinterleaving splits the input frame into 2 fields (so called half pictures). Odd lines are moved to the top half of the output image, even lines to the bottom half. You can process (filter) them independently and then re-interleave them. The filter accepts the following options: luma\_mode, l chroma\_mode, c alpha\_mode, a Available values for luma\_mode, chroma\_mode and alpha\_mode are: ‘none’ Do nothing. ‘deinterleave, d’ Deinterleave fields, placing one above the other. ‘interleave, i’ Interleave fields. Reverse the effect of deinterleaving. Default value is `none`. luma\_swap, ls chroma\_swap, cs alpha\_swap, as Swap luma/chroma/alpha fields. Exchange even & odd lines. Default value is `0`. #### 39.132.1 Commands This filter supports the all above options as commands. ### 39.133 inflate Apply inflate effect to the video. This filter replaces the pixel by the local(3x3) average by taking into account only values higher than the pixel. It accepts the following options: threshold0 threshold1 threshold2 threshold3 Limit the maximum change for each plane, default is 65535. If 0, plane will remain unchanged. #### 39.133.1 Commands This filter supports the all above options as commands. ### 39.134 interlace, interlace\_vulkan Simple interlacing filter from progressive contents. This interleaves upper (or lower) lines from odd frames with lower (or upper) lines from even frames, halving the frame rate and preserving image height. Original Original New Frame Frame 'j' Frame 'j+1' (tff) ========== =========== ================== Line 0 --------------------> Frame 'j' Line 0 Line 1 Line 1 ----> Frame 'j+1' Line 1 Line 2 ---------------------> Frame 'j' Line 2 Line 3 Line 3 ----> Frame 'j+1' Line 3 ... ... ... New Frame + 1 will be generated by Frame 'j+2' and Frame 'j+3' and so on It accepts the following optional parameters: scan This determines whether the interlaced frame is taken from the even (tff - default) or odd (bff) lines of the progressive frame. lowpass Vertical lowpass filter to avoid twitter interlacing and reduce moire patterns. ‘0, off’ Disable vertical lowpass filter ‘1, linear’ Enable linear filter (default) ‘2, complex’ Enable complex filter. This will slightly less reduce twitter and moire but better retain detail and subjective sharpness impression. ### 39.135 kerndeint Deinterlace input video by applying Donald Graft’s adaptive kernel deinterling. Work on interlaced parts of a video to produce progressive frames. The description of the accepted parameters follows. thresh Set the threshold which affects the filter’s tolerance when determining if a pixel line must be processed. It must be an integer in the range \[0,255\] and defaults to 10. A value of 0 will result in applying the process on every pixels. map Paint pixels exceeding the threshold value to white if set to 1. Default is 0. order Set the fields order. Swap fields if set to 1, leave fields alone if 0. Default is 0. sharp Enable additional sharpening if set to 1. Default is 0. twoway Enable twoway sharpening if set to 1. Default is 0. #### 39.135.1 Examples * Apply default values: kerndeint=thresh=10:map=0:order=0:sharp=0:twoway=0 * Enable additional sharpening: kerndeint=sharp=1 * Paint processed pixels in white: kerndeint=map=1 ### 39.136 kirsch Apply kirsch operator to input video stream. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. scale Set value which will be multiplied with filtered result. delta Set value which will be added to filtered result. #### 39.136.1 Commands This filter supports the all above options as commands. ### 39.137 lagfun Slowly update darker pixels. This filter makes short flashes of light appear longer. This filter accepts the following options: decay Set factor for decaying. Default is .95. Allowed range is from 0 to 1. planes Set which planes to filter. Default is all. Allowed range is from 0 to 15. #### 39.137.1 Commands This filter supports the all above options as commands. ### 39.138 lenscorrection Correct radial lens distortion This filter can be used to correct for radial distortion as can result from the use of wide angle lenses, and thereby re-rectify the image. To find the right parameters one can use tools available for example as part of opencv or simply trial-and-error. To use opencv use the calibration sample (under samples/cpp) from the opencv sources and extract the k1 and k2 coefficients from the resulting matrix. Note that effectively the same filter is available in the open-source tools Krita and Digikam from the KDE project. In contrast to the vignette filter, which can also be used to compensate lens errors, this filter corrects the distortion of the image, whereas vignette corrects the brightness distribution, so you may want to use both filters together in certain cases, though you will have to take care of ordering, i.e. whether vignetting should be applied before or after lens correction. #### 39.138.1 Options The filter accepts the following options: cx Relative x-coordinate of the focal point of the image, and thereby the center of the distortion. This value has a range \[0,1\] and is expressed as fractions of the image width. Default is 0.5. cy Relative y-coordinate of the focal point of the image, and thereby the center of the distortion. This value has a range \[0,1\] and is expressed as fractions of the image height. Default is 0.5. k1 Coefficient of the quadratic correction term. This value has a range \[-1,1\]. 0 means no correction. Default is 0. k2 Coefficient of the double quadratic correction term. This value has a range \[-1,1\]. 0 means no correction. Default is 0. i Set interpolation type. Can be `nearest` or `bilinear`. Default is `nearest`. fc Specify the color of the unmapped pixels. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. Default color is `black@0`. The formula that generates the correction is: r\_src = r\_tgt \* (1 + k1 \* (r\_tgt / r\_0)^2 + k2 \* (r\_tgt / r\_0)^4) where r\_0 is halve of the image diagonal and r\_src and r\_tgt are the distances from the focal point in the source and target images, respectively. #### 39.138.2 Commands This filter supports the all above options as commands. ### 39.139 lensfun Apply lens correction via the lensfun library (http://lensfun.sourceforge.net/). The `lensfun` filter requires the camera make, camera model, and lens model to apply the lens correction. The filter will load the lensfun database and query it to find the corresponding camera and lens entries in the database. As long as these entries can be found with the given options, the filter can perform corrections on frames. Note that incomplete strings will result in the filter choosing the best match with the given options, and the filter will output the chosen camera and lens models (logged with level "info"). You must provide the make, camera model, and lens model as they are required. To obtain a list of available makes and models, leave out one or both of `make` and `model` options. The filter will send the full list to the log with level `INFO`. The first column is the make and the second column is the model. To obtain a list of available lenses, set any values for make and model and leave out the `lens_model` option. The filter will send the full list of lenses in the log with level `INFO`. The ffmpeg tool will exit after the list is printed. The filter accepts the following options: make The make of the camera (for example, "Canon"). This option is required. model The model of the camera (for example, "Canon EOS 100D"). This option is required. lens\_model The model of the lens (for example, "Canon EF-S 18-55mm f/3.5-5.6 IS STM"). This option is required. db\_path The full path to the lens database folder. If not set, the filter will attempt to load the database from the install path when the library was built. Default is unset. mode The type of correction to apply. The following values are valid options: ‘vignetting’ Enables fixing lens vignetting. ‘geometry’ Enables fixing lens geometry. This is the default. ‘subpixel’ Enables fixing chromatic aberrations. ‘vig\_geo’ Enables fixing lens vignetting and lens geometry. ‘vig\_subpixel’ Enables fixing lens vignetting and chromatic aberrations. ‘distortion’ Enables fixing both lens geometry and chromatic aberrations. ‘all’ Enables all possible corrections. focal\_length The focal length of the image/video (zoom; expected constant for video). For example, a 18–55mm lens has focal length range of \[18–55\], so a value in that range should be chosen when using that lens. Default 18. aperture The aperture of the image/video (expected constant for video). Note that aperture is only used for vignetting correction. Default 3.5. focus\_distance The focus distance of the image/video (expected constant for video). Note that focus distance is only used for vignetting and only slightly affects the vignetting correction process. If unknown, leave it at the default value (which is 1000). scale The scale factor which is applied after transformation. After correction the video is no longer necessarily rectangular. This parameter controls how much of the resulting image is visible. The value 0 means that a value will be chosen automatically such that there is little or no unmapped area in the output image. 1.0 means that no additional scaling is done. Lower values may result in more of the corrected image being visible, while higher values may avoid unmapped areas in the output. target\_geometry The target geometry of the output image/video. The following values are valid options: ‘rectilinear (default)’ ‘fisheye’ ‘panoramic’ ‘equirectangular’ ‘fisheye\_orthographic’ ‘fisheye\_stereographic’ ‘fisheye\_equisolid’ ‘fisheye\_thoby’ reverse Apply the reverse of image correction (instead of correcting distortion, apply it). interpolation The type of interpolation used when correcting distortion. The following values are valid options: ‘nearest’ ‘linear (default)’ ‘lanczos’ #### 39.139.1 Examples * Apply lens correction with make "Canon", camera model "Canon EOS 100D", and lens model "Canon EF-S 18-55mm f/3.5-5.6 IS STM" with focal length of "18" and aperture of "8.0". ffmpeg -i input.mov -vf lensfun=make=Canon:model="Canon EOS 100D":lens\_model="Canon EF-S 18-55mm f/3.5-5.6 IS STM":focal\_length=18:aperture=8 -c:v h264 -b:v 8000k output.mov * Apply the same as before, but only for the first 5 seconds of video. ffmpeg -i input.mov -vf lensfun=make=Canon:model="Canon EOS 100D":lens\_model="Canon EF-S 18-55mm f/3.5-5.6 IS STM":focal\_length=18:aperture=8:enable='lte(t\\,5)' -c:v h264 -b:v 8000k output.mov ### 39.140 lcevc Low Complexity Enhancement Video Codec filter based on liblcevc\_dec (https://github.com/v-novaltd/LCEVCdec). ### 39.141 libplacebo Flexible GPU-accelerated processing filter based on libplacebo (https://code.videolan.org/videolan/libplacebo). #### 39.141.1 Options The options for this filter are divided into the following sections: #### 39.141.1.1 Output mode These options control the overall output mode. By default, libplacebo will try to preserve the source colorimetry and size as best as it can, but it will apply any embedded film grain, dolby vision metadata or anamorphic SAR present in source frames. inputs Set the number of inputs. This can be used, alongside the `idx` variable, to allow placing/blending multiple inputs inside the output frame. This effectively enables functionality similar to hstack, overlay, etc. w h Set the output video dimension expression. Default values are `iw` and `ih`. Allows for the same expressions as the scale filter. crop\_x crop\_y Set the input crop x/y expressions, default values are `(iw-cw)/2` and `(ih-ch)/2`. crop\_w crop\_h Set the input crop width/height expressions, default values are `iw` and `ih`. pos\_x pos\_y Set the output placement x/y expressions, default values are `(ow-pw)/2` and `(oh-ph)/2`. pos\_w pos\_h Set the output placement width/height expressions, default values are `ow` and `oh`. fps Set the output frame rate. This can be rational, e.g. `60000/1001`. If set to the special string `none` (the default), input timestamps will instead be passed through to the output unmodified. Otherwise, the input video frames will be interpolated as necessary to rescale the video to the specified target framerate, in a manner as determined by the frame\_mixer option. format Set the output format override. If unset (the default), frames will be output in the same format as the respective input frames. Otherwise, format conversion will be performed. force\_original\_aspect\_ratio force\_divisible\_by Work the same as the identical scale filter options. normalize\_sar If enabled, output frames will always have a pixel aspect ratio of 1:1. This will introduce additional padding/cropping as necessary. If disabled (the default), any aspect ratio mismatches, including those from e.g. anamorphic video sources, are forwarded to the output pixel aspect ratio. pad\_crop\_ratio Specifies a ratio (between `0.0` and `1.0`) between padding and cropping when the input aspect ratio does not match the output aspect ratio and normalize\_sar is in effect. The default of `0.0` always pads the content with black borders, while a value of `1.0` always crops off parts of the content. Intermediate values are possible, leading to a mix of the two approaches. fillcolor Set the color used to fill the output area not covered by the output image, for example as a result of normalize\_sar. For the general syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. Defaults to `black@0`. corner\_rounding Render frames with rounded corners. The value, given as a float ranging from `0.0` to `1.0`, indicates the relative degree of rounding, from fully square to fully circular. In other words, it gives the radius divided by half the smaller side length. Defaults to `0.0`. extra\_opts Pass extra libplacebo internal configuration options. These can be specified as a list of key\=value pairs separated by ’:’. The following example shows how to configure a custom filter kernel ("EWA LanczosSharp") and use it to double the input image resolution: \-vf "libplacebo=w=iw\*2:h=ih\*2:extra\_opts='upscaler=custom\\:upscaler\_preset=ewa\_lanczos\\:upscaler\_blur=0.9812505644269356'" colorspace color\_primaries color\_trc range Configure the colorspace that output frames will be delivered in. The default value of `auto` outputs frames in the same format as the input frames, leading to no change. For any other value, conversion will be performed. See the setparams filter for a list of possible values. apply\_filmgrain Apply film grain (e.g. AV1 or H.274) if present in source frames, and strip it from the output. Enabled by default. apply\_dolbyvision Apply Dolby Vision RPU metadata if present in source frames, and strip it from the output. Enabled by default. Note that Dolby Vision will always output BT.2020+PQ, overriding the usual input frame metadata. These will also be picked as the values of `auto` for the respective frame output options. In addition to the expression constants documented for the scale filter, the crop\_w, crop\_h, crop\_x, crop\_y, pos\_w, pos\_h, pos\_x and pos\_y options can also contain the following constants: in\_idx, idx The (0-based) numeric index of the currently active input stream. crop\_w, cw crop\_h, ch The computed values of crop\_w and crop\_h. pos\_w, pw pos\_h, ph The computed values of pos\_w and pos\_h. in\_t, t The input frame timestamp, in seconds. NAN if input timestamp is unknown. out\_t, ot The input frame timestamp, in seconds. NAN if input timestamp is unknown. n The input frame number, starting with 0. #### 39.141.1.2 Scaling The options in this section control how libplacebo performs upscaling and (if necessary) downscaling. Note that libplacebo will always internally operate on 4:4:4 content, so any sub-sampled chroma formats such as `yuv420p` will necessarily be upsampled and downsampled as part of the rendering process. That means scaling might be in effect even if the source and destination resolution are the same. upscaler downscaler Configure the filter kernel used for upscaling and downscaling. The respective defaults are `spline36` and `mitchell`. For a full list of possible values, pass `help` to these options. The most important values are: ‘none’ Forces the use of built-in GPU texture sampling (typically bilinear). Extremely fast but poor quality, especially when downscaling. ‘bilinear’ Bilinear interpolation. Can generally be done for free on GPUs, except when doing so would lead to aliasing. Fast and low quality. ‘nearest’ Nearest-neighbour interpolation. Sharp but highly aliasing. ‘oversample’ Algorithm that looks visually similar to nearest-neighbour interpolation but tries to preserve pixel aspect ratio. Good for pixel art, since it results in minimal distortion of the artistic appearance. ‘lanczos’ Standard sinc-sinc interpolation kernel. ‘spline36’ Cubic spline approximation of lanczos. No difference in performance, but has very slightly less ringing. ‘ewa\_lanczos’ Elliptically weighted average version of lanczos, based on a jinc-sinc kernel. This is also popularly referred to as just "Jinc scaling". Slow but very high quality. ‘gaussian’ Gaussian kernel. Has certain ideal mathematical properties, but subjectively very blurry. ‘mitchell’ Cubic BC spline with parameters recommended by Mitchell and Netravali. Very little ringing. frame\_mixer Controls the kernel used for mixing frames temporally. The default value is `none`, which disables frame mixing. For a full list of possible values, pass `help` to this option. The most important values are: ‘none’ Disables frame mixing, giving a result equivalent to "nearest neighbour" semantics. ‘oversample’ Oversamples the input video to create a "Smooth Motion"-type effect: if an output frame would exactly fall on the transition between two video frames, it is blended according to the relative overlap. This is the recommended option whenever preserving the original subjective appearance is desired. ‘mitchell\_clamp’ Larger filter kernel that smoothly interpolates multiple frames in a manner designed to eliminate ringing and other artefacts as much as possible. This is the recommended option wherever maximum visual smoothness is desired. ‘linear’ Linear blend/fade between frames. Especially useful for constructing e.g. slideshows. antiringing Enables anti-ringing (for non-EWA filters). The value (between `0.0` and `1.0`) configures the strength of the anti-ringing algorithm. May increase aliasing if set too high. Disabled by default. sigmoid Enable sigmoidal compression during upscaling. Reduces ringing slightly. Enabled by default. #### 39.141.1.3 Deinterlacing Deinterlacing is automatically supported when frames are tagged as interlaced, however frames are not deinterlaced unless a deinterlacing algorithm is chosen. deinterlace The the deinterlacing algorithm to use. ‘weave’ No deinterlacing, weave fields together into a single frame. This is the default. ‘bob’ Naive bob deinterlacing, simply repeat each field line twice. ‘yadif’ Yet another deinterlacing filter. See the yadif filter for more details. skip\_spatial\_check Skip the spatial deinterlacing check when using `yadif` deinterlacing. send\_fields Output a frame for each field, rather than for each frame. Note that this will always double the tagged output frame rate, even if the input does not contain any interlaced frames. Disabled by default. #### 39.141.1.4 Debanding Libplacebo comes with a built-in debanding filter that is good at counteracting many common sources of banding and blocking. Turning this on is highly recommended whenever quality is desired. deband Enable (fast) debanding algorithm. Disabled by default. deband\_iterations Number of deband iterations of the debanding algorithm. Each iteration is performed with progressively increased radius (and diminished threshold). Recommended values are in the range `1` to `4`. Defaults to `1`. deband\_threshold Debanding filter strength. Higher numbers lead to more aggressive debanding. Defaults to `4.0`. deband\_radius Debanding filter radius. A higher radius is better for slow gradients, while a lower radius is better for steep gradients. Defaults to `16.0`. deband\_grain Amount of extra output grain to add. Helps hide imperfections. Defaults to `6.0`. #### 39.141.1.5 Color adjustment A collection of subjective color controls. Not very rigorous, so the exact effect will vary somewhat depending on the input primaries and colorspace. brightness Brightness boost, between `-1.0` and `1.0`. Defaults to `0.0`. contrast Contrast gain, between `0.0` and `16.0`. Defaults to `1.0`. saturation Saturation gain, between `0.0` and `16.0`. Defaults to `1.0`. hue Hue shift in radians, between `-3.14` and `3.14`. Defaults to `0.0`. This will rotate the UV subvector, defaulting to BT.709 coefficients for RGB inputs. gamma Gamma adjustment, between `0.0` and `16.0`. Defaults to `1.0`. cones Cone model to use for color blindness simulation. Accepts any combination of `l`, `m` and `s`. Here are some examples: ‘m’ Deuteranomaly / deuteranopia (affecting 3%-4% of the population) ‘l’ Protanomaly / protanopia (affecting 1%-2% of the population) ‘l+m’ Monochromacy (very rare) ‘l+m+s’ Achromatopsy (complete loss of daytime vision, extremely rare) cone-strength Gain factor for the cones specified by `cones`, between `0.0` and `10.0`. A value of `1.0` results in no change to color vision. A value of `0.0` (the default) simulates complete loss of those cones. Values above `1.0` result in exaggerating the differences between cones, which may help compensate for reduced color vision. #### 39.141.1.6 Peak detection To help deal with sources that only have static HDR10 metadata (or no tagging whatsoever), libplacebo uses its own internal frame analysis compute shader to analyze source frames and adapt the tone mapping function in realtime. If this is too slow, or if exactly reproducible frame-perfect results are needed, it’s recommended to turn this feature off. peak\_detect Enable HDR peak detection. Ignores static MaxCLL/MaxFALL values in favor of dynamic detection from the input. Note that the detected values do not get written back to the output frames, they merely guide the internal tone mapping process. Enabled by default. smoothing\_period Peak detection smoothing period, between `0.0` and `1000.0`. Higher values result in peak detection becoming less responsive to changes in the input. Defaults to `100.0`. scene\_threshold\_low scene\_threshold\_high Lower and upper thresholds for scene change detection. Expressed in a logarithmic scale between `0.0` and `100.0`. Default to `5.5` and `10.0`, respectively. Setting either to a negative value disables this functionality. percentile Which percentile of the frame brightness histogram to use as the source peak for tone-mapping. Defaults to `99.995`, a fairly conservative value. Setting this to `100.0` disables frame histogram measurement and instead uses the true peak brightness for tone-mapping. #### 39.141.1.7 Tone mapping The options in this section control how libplacebo performs tone-mapping and gamut-mapping when dealing with mismatches between wide-gamut or HDR content. In general, libplacebo relies on accurate source tagging and mastering display gamut information to produce the best results. gamut\_mode How to handle out-of-gamut colors that can occur as a result of colorimetric gamut mapping. ‘clip’ Do nothing, simply clip out-of-range colors to the RGB volume. Low quality but extremely fast. ‘perceptual’ Perceptually soft-clip colors to the gamut volume. This is the default. ‘relative’ Relative colorimetric hard-clip. Similar to `perceptual` but without the soft knee. ‘saturation’ Saturation mapping, maps primaries directly to primaries in RGB space. Not recommended except for artificial computer graphics for which a bright, saturated display is desired. ‘absolute’ Absolute colorimetric hard-clip. Performs no adjustment of the white point. ‘desaturate’ Hard-desaturates out-of-gamut colors towards white, while preserving the luminance. Has a tendency to distort the visual appearance of bright objects. ‘darken’ Linearly reduces content brightness to preserves saturated details, followed by clipping the remaining out-of-gamut colors. ‘warn’ Highlight out-of-gamut pixels (by inverting/marking them). ‘linear’ Linearly reduces chromaticity of the entire image to make it fit within the target color volume. Be careful when using this on BT.2020 sources without proper mastering metadata, as doing so will lead to excessive desaturation. tonemapping Tone-mapping algorithm to use. Available values are: ‘auto’ Automatic selection based on internal heuristics. This is the default. ‘clip’ Performs no tone-mapping, just clips out-of-range colors. Retains perfect color accuracy for in-range colors but completely destroys out-of-range information. Does not perform any black point adaptation. Not configurable. ‘st2094-40’ EETF from SMPTE ST 2094-40 Annex B, which applies the Bezier curves from HDR10+ dynamic metadata based on Bezier curves to perform tone-mapping. The OOTF used is adjusted based on the ratio between the targeted and actual display peak luminances. ‘st2094-10’ EETF from SMPTE ST 2094-10 Annex B.2, which takes into account the input signal average luminance in addition to the maximum/minimum. The configurable contrast parameter influences the slope of the linear output segment, defaulting to `1.0` for no increase/decrease in contrast. Note that this does not currently include the subjective gain/offset/gamma controls defined in Annex B.3. ‘bt.2390’ EETF from the ITU-R Report BT.2390, a hermite spline roll-off with linear segment. The knee point offset is configurable. Note that this parameter defaults to `1.0`, rather than the value of `0.5` from the ITU-R spec. ‘bt.2446a’ EETF from ITU-R Report BT.2446, method A. Designed for well-mastered HDR sources. Can be used for both forward and inverse tone mapping. Not configurable. ‘spline’ Simple spline consisting of two polynomials, joined by a single pivot point. The parameter gives the pivot point (in PQ space), defaulting to `0.30`. Can be used for both forward and inverse tone mapping. ‘reinhard’ Simple non-linear, global tone mapping algorithm. The parameter specifies the local contrast coefficient at the display peak. Essentially, a parameter of `0.5` implies that the reference white will be about half as bright as when clipping. Defaults to `0.5`, which results in the simplest formulation of this function. ‘mobius’ Generalization of the reinhard tone mapping algorithm to support an additional linear slope near black. The tone mapping parameter indicates the trade-off between the linear section and the non-linear section. Essentially, for a given parameter x, every color value below x will be mapped linearly, while higher values get non-linearly tone-mapped. Values near `1.0` make this curve behave like `clip`, while values near `0.0` make this curve behave like `reinhard`. The default value is `0.3`, which provides a good balance between colorimetric accuracy and preserving out-of-gamut details. ‘hable’ Piece-wise, filmic tone-mapping algorithm developed by John Hable for use in Uncharted 2, inspired by a similar tone-mapping algorithm used by Kodak. Popularized by its use in video games with HDR rendering. Preserves both dark and bright details very well, but comes with the drawback of changing the average brightness quite significantly. This is sort of similar to `reinhard` with parameter `0.24`. ‘gamma’ Fits a gamma (power) function to transfer between the source and target color spaces, effectively resulting in a perceptual hard-knee joining two roughly linear sections. This preserves details at all scales fairly accurately, but can result in an image with a muted or dull appearance. The parameter is used as the cutoff point, defaulting to `0.5`. ‘linear’ Linearly stretches the input range to the output range, in PQ space. This will preserve all details accurately, but results in a significantly different average brightness. Can be used for inverse tone-mapping in addition to regular tone-mapping. The parameter can be used as an additional linear gain coefficient (defaulting to `1.0`). tonemapping\_param For tunable tone mapping functions, this parameter can be used to fine-tune the curve behavior. Refer to the documentation of `tonemapping`. The default value of `0.0` is replaced by the curve’s preferred default setting. inverse\_tonemapping If enabled, this filter will also attempt stretching SDR signals to fill HDR output color volumes. Disabled by default. tonemapping\_lut\_size Size of the tone-mapping LUT, between `2` and `1024`. Defaults to `256`. Note that this figure is squared when combined with `peak_detect`. contrast\_recovery Contrast recovery strength. If set to a value above `0.0`, the source image will be divided into high-frequency and low-frequency components, and a portion of the high-frequency image is added back onto the tone-mapped output. May cause excessive ringing artifacts for some HDR sources, but can improve the subjective sharpness and detail left over in the image after tone-mapping. Defaults to `0.30`. contrast\_smoothness Contrast recovery lowpass kernel size. Defaults to `3.5`. Increasing or decreasing this will affect the visual appearance substantially. Has no effect when `contrast_recovery` is disabled. #### 39.141.1.8 Dithering By default, libplacebo will dither whenever necessary, which includes rendering to any integer format below 16-bit precision. It’s recommended to always leave this on, since not doing so may result in visible banding in the output, even if the `debanding` filter is enabled. If maximum performance is needed, use `ordered_fixed` instead of disabling dithering. dithering Dithering method to use. Accepts the following values: ‘none’ Disables dithering completely. May result in visible banding. ‘blue’ Dither with pseudo-blue noise. This is the default. ‘ordered’ Tunable ordered dither pattern. ‘ordered\_fixed’ Faster ordered dither with a fixed size of `6`. Texture-less. ‘white’ Dither with white noise. Texture-less. dither\_lut\_size Dither LUT size, as log base2 between `1` and `8`. Defaults to `6`, corresponding to a LUT size of `64x64`. dither\_temporal Enables temporal dithering. Disabled by default. #### 39.141.1.9 Custom shaders libplacebo supports a number of custom shaders based on the mpv .hook GLSL syntax. A collection of such shaders can be found here: https://github.com/mpv-player/mpv/wiki/User-Scripts#user-shaders A full description of the mpv shader format is beyond the scope of this section, but a summary can be found here: https://mpv.io/manual/master/#options-glsl-shader custom\_shader\_path Specifies a path to a custom shader file to load at runtime. custom\_shader\_bin Specifies a complete custom shader as a raw string. #### 39.141.1.10 Debugging / performance All of the options in this section default off. They may be of assistance when attempting to squeeze the maximum performance at the cost of quality. skip\_aa Disable anti-aliasing when downscaling. disable\_linear Disable linear light scaling. disable\_builtin Disable built-in GPU sampling (forces LUT). disable\_fbos Forcibly disable FBOs, resulting in loss of almost all functionality, but offering the maximum possible speed. #### 39.141.2 Commands This filter supports almost all of the above options as commands. #### 39.141.3 Examples * Tone-map input to standard gamut BT.709 output: libplacebo=colorspace=bt709:color\_primaries=bt709:color\_trc=bt709:range=tv * Rescale input to fit into standard 1080p, with high quality scaling: libplacebo=w=1920:h=1080:force\_original\_aspect\_ratio=decrease:normalize\_sar=true:upscaler=ewa\_lanczos:downscaler=ewa\_lanczos * Interpolate low FPS / VFR input to smoothed constant 60 fps output: libplacebo=fps=60:frame\_mixer=mitchell\_clamp * Convert input to standard sRGB JPEG: libplacebo=format=yuv420p:colorspace=bt470bg:color\_primaries=bt709:color\_trc=iec61966-2-1:range=pc * Use higher quality debanding settings: libplacebo=deband=true:deband\_iterations=3:deband\_radius=8:deband\_threshold=6 * Run this filter on the CPU, on systems with Mesa installed (and with the most expensive options disabled): ffmpeg ... -init\_hw\_device vulkan:llvmpipe ... -vf libplacebo=upscaler=none:downscaler=none:peak\_detect=false * Suppress CPU-based AV1/H.274 film grain application in the decoder, in favor of doing it with this filter. Note that this is only a gain if the frames are either already on the GPU, or if you’re using libplacebo for other purposes, since otherwise the VRAM roundtrip will more than offset any expected speedup. ffmpeg -export\_side\_data +film\_grain ... -vf libplacebo=apply\_filmgrain=true * Interop with VAAPI hwdec to avoid round-tripping through RAM: ffmpeg -init\_hw\_device vulkan -hwaccel vaapi -hwaccel\_output\_format vaapi ... -vf libplacebo ### 39.142 libvmaf Calculate the VMAF (Video Multi-Method Assessment Fusion) score for a reference/distorted pair of input videos. The first input is the distorted video, and the second input is the reference video. The obtained VMAF score is printed through the logging system. It requires Netflix’s vmaf library (libvmaf) as a pre-requisite. After installing the library it can be enabled using: `./configure --enable-libvmaf`. The filter has following options: model A ‘|‘ delimited list of vmaf models. Each model can be configured with a number of parameters. Default value: `"version=vmaf_v0.6.1"` feature A ‘|‘ delimited list of features. Each feature can be configured with a number of parameters. log\_path Set the file path to be used to store log files. log\_fmt Set the format of the log file (xml, json, csv, or sub). pool Set the pool method to be used for computing vmaf. Options are `min`, `harmonic_mean` or `mean` (default). n\_threads Set number of threads to be used when initializing libvmaf. Default value: `0`, no threads. n\_subsample Set frame subsampling interval to be used. This filter also supports the framesync options. #### 39.142.1 Examples * In the examples below, a distorted video distorted.mpg is compared with a reference file reference.mpg. * Basic usage: ffmpeg -i distorted.mpg -i reference.mpg -lavfi libvmaf=log\_path=output.xml -f null - * Example with multiple models: ffmpeg -i distorted.mpg -i reference.mpg -lavfi libvmaf='model=version=vmaf\_v0.6.1\\\\:name=vmaf|version=vmaf\_v0.6.1neg\\\\:name=vmaf\_neg' -f null - * Example with multiple additional features: ffmpeg -i distorted.mpg -i reference.mpg -lavfi libvmaf='feature=name=psnr|name=ciede' -f null - * Example with options and different containers: ffmpeg -i distorted.mpg -i reference.mkv -lavfi "\[0:v\]settb=AVTB,setpts=PTS-STARTPTS\[main\];\[1:v\]settb=AVTB,setpts=PTS-STARTPTS\[ref\];\[main\]\[ref\]libvmaf=log\_fmt=json:log\_path=output.json" -f null - ### 39.143 libvmaf\_cuda This is the CUDA variant of the libvmaf filter. It only accepts CUDA frames. It requires Netflix’s vmaf library (libvmaf) as a pre-requisite. After installing the library it can be enabled using: `./configure --enable-nonfree --enable-ffnvcodec --enable-libvmaf`. #### 39.143.1 Examples * Basic usage showing CUVID hardware decoding and CUDA scaling with scale\_cuda: ffmpeg \\ -hwaccel cuda -hwaccel\_output\_format cuda -codec:v av1\_cuvid -i dis.obu \\ -hwaccel cuda -hwaccel\_output\_format cuda -codec:v av1\_cuvid -i ref.obu \\ -filter\_complex " \[0:v\]scale\_cuda=format=yuv420p\[dis\]; \\ \[1:v\]scale\_cuda=format=yuv420p\[ref\]; \\ \[dis\]\[ref\]libvmaf\_cuda=log\_fmt=json:log\_path=output.json " \\ -f null - ### 39.144 limitdiff Apply limited difference filter using second and optionally third video stream. The filter accepts the following options: threshold Set the threshold to use when allowing certain differences between video streams. Any absolute difference value lower or exact than this threshold will pick pixel components from first video stream. elasticity Set the elasticity of soft thresholding when processing video streams. This value multiplied with first one sets second threshold. Any absolute difference value greater or exact than second threshold will pick pixel components from second video stream. For values between those two threshold linear interpolation between first and second video stream will be used. reference Enable the reference (third) video stream processing. By default is disabled. If set, this video stream will be used for calculating absolute difference with first video stream. planes Specify which planes will be processed. Defaults to all available. #### 39.144.1 Commands This filter supports the all above options as commands except option ‘reference’. ### 39.145 limiter Limits the pixel components values to the specified range \[min, max\]. The filter accepts the following options: min Lower bound. Defaults to the lowest allowed value for the input. max Upper bound. Defaults to the highest allowed value for the input. planes Specify which planes will be processed. Defaults to all available. #### 39.145.1 Commands This filter supports the all above options as commands. ### 39.146 loop Loop video frames. The filter accepts the following options: loop Set the number of loops. Setting this value to -1 will result in infinite loops. Default is 0. size Set maximal size in number of frames. Default is 0. start Set first frame of loop. Default is 0. time Set the time of loop start in seconds. Only used if option named start is set to `-1`. #### 39.146.1 Examples * Loop single first frame infinitely: loop=loop=-1:size=1:start=0 * Loop single first frame 10 times: loop=loop=10:size=1:start=0 * Loop 10 first frames 5 times: loop=loop=5:size=10:start=0 ### 39.147 lut1d Apply a 1D LUT to an input video. The filter accepts the following options: file Set the 1D LUT file name. Currently supported formats: ‘cube’ Iridas ‘csp’ cineSpace interp Select interpolation mode. Available values are: ‘nearest’ Use values from the nearest defined point. ‘linear’ Interpolate values using the linear interpolation. ‘cosine’ Interpolate values using the cosine interpolation. ‘cubic’ Interpolate values using the cubic interpolation. ‘spline’ Interpolate values using the spline interpolation. #### 39.147.1 Commands This filter supports the all above options as commands. ### 39.148 lut3d Apply a 3D LUT to an input video. The filter accepts the following options: file Set the 3D LUT file name. Currently supported formats: ‘3dl’ AfterEffects ‘cube’ Iridas ‘dat’ DaVinci ‘m3d’ Pandora ‘csp’ cineSpace interp Select interpolation mode. Available values are: ‘nearest’ Use values from the nearest defined point. ‘trilinear’ Interpolate values using the 8 points defining a cube. ‘tetrahedral’ Interpolate values using a tetrahedron. ‘pyramid’ Interpolate values using a pyramid. ‘prism’ Interpolate values using a prism. #### 39.148.1 Commands This filter supports the `interp` option as commands. ### 39.149 lumakey Turn certain luma values into transparency. The filter accepts the following options: threshold Set the luma which will be used as base for transparency. Default value is `0`. tolerance Set the range of luma values to be keyed out. Default value is `0.01`. softness Set the range of softness. Default value is `0`. Use this to control gradual transition from zero to full transparency. #### 39.149.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.150 lut, lutrgb, lutyuv Compute a look-up table for binding each pixel component input value to an output value, and apply it to the input video. lutyuv applies a lookup table to a YUV input video, lutrgb to an RGB input video. These filters accept the following parameters: c0 set first pixel component expression c1 set second pixel component expression c2 set third pixel component expression c3 set fourth pixel component expression, corresponds to the alpha component r set red component expression g set green component expression b set blue component expression a alpha component expression y set Y/luma component expression u set U/Cb component expression v set V/Cr component expression Each of them specifies the expression to use for computing the lookup table for the corresponding pixel component values. The exact component associated to each of the c\* options depends on the format in input. The lut filter requires either YUV or RGB pixel formats in input, lutrgb requires RGB pixel formats in input, and lutyuv requires YUV. The expressions can contain the following constants and functions: w h The input width and height. val The input value for the pixel component. clipval The input value, clipped to the minval\-maxval range. maxval The maximum value for the pixel component. minval The minimum value for the pixel component. negval The negated value for the pixel component value, clipped to the minval\-maxval range; it corresponds to the expression "maxval-clipval+minval". clip(val) The computed value in val, clipped to the minval\-maxval range. gammaval(gamma) The computed gamma correction value of the pixel component value, clipped to the minval\-maxval range. It corresponds to the expression "pow((clipval-minval)/(maxval-minval)\\,gamma)\*(maxval-minval)+minval" All expressions default to "clipval". #### 39.150.1 Commands This filter supports same commands as options. #### 39.150.2 Examples * Negate input video: lutrgb="r=maxval+minval-val:g=maxval+minval-val:b=maxval+minval-val" lutyuv="y=maxval+minval-val:u=maxval+minval-val:v=maxval+minval-val" The above is the same as: lutrgb="r=negval:g=negval:b=negval" lutyuv="y=negval:u=negval:v=negval" * Negate luma: lutyuv=y=negval * Remove chroma components, turning the video into a graytone image: lutyuv="u=128:v=128" * Apply a luma burning effect: lutyuv="y=2\*val" * Remove green and blue components: lutrgb="g=0:b=0" * Set a constant alpha channel value on input: format=rgba,lutrgb=a="maxval-minval/2" * Correct luma gamma by a factor of 0.5: lutyuv=y=gammaval(0.5) * Discard least significant bits of luma: lutyuv=y='bitand(val, 128+64+32)' * Technicolor like effect: lutyuv=u='(val-maxval/2)\*2+maxval/2':v='(val-maxval/2)\*2+maxval/2' ### 39.151 lut2, tlut2 The `lut2` filter takes two input streams and outputs one stream. The `tlut2` (time lut2) filter takes two consecutive frames from one single stream. This filter accepts the following parameters: c0 set first pixel component expression c1 set second pixel component expression c2 set third pixel component expression c3 set fourth pixel component expression, corresponds to the alpha component d set output bit depth, only available for `lut2` filter. By default is 0, which means bit depth is automatically picked from first input format. The `lut2` filter also supports the framesync options. Each of them specifies the expression to use for computing the lookup table for the corresponding pixel component values. The exact component associated to each of the c\* options depends on the format in inputs. The expressions can contain the following constants: w h The input width and height. x The first input value for the pixel component. y The second input value for the pixel component. bdx The first input video bit depth. bdy The second input video bit depth. All expressions default to "x". #### 39.151.1 Commands This filter supports the all above options as commands except option `d`. #### 39.151.2 Examples * Highlight differences between two RGB video streams: lut2='ifnot(x-y,0,pow(2,bdx)-1):ifnot(x-y,0,pow(2,bdx)-1):ifnot(x-y,0,pow(2,bdx)-1)' * Highlight differences between two YUV video streams: lut2='ifnot(x-y,0,pow(2,bdx)-1):ifnot(x-y,pow(2,bdx-1),pow(2,bdx)-1):ifnot(x-y,pow(2,bdx-1),pow(2,bdx)-1)' * Show max difference between two video streams: lut2='if(lt(x,y),0,if(gt(x,y),pow(2,bdx)-1,pow(2,bdx-1))):if(lt(x,y),0,if(gt(x,y),pow(2,bdx)-1,pow(2,bdx-1))):if(lt(x,y),0,if(gt(x,y),pow(2,bdx)-1,pow(2,bdx-1)))' ### 39.152 maskedclamp Clamp the first input stream with the second input and third input stream. Returns the value of first stream to be between second input stream - `undershoot` and third input stream + `overshoot`. This filter accepts the following options: undershoot Default value is `0`. overshoot Default value is `0`. planes Set which planes will be processed as bitmap, unprocessed planes will be copied from first stream. By default value 0xf, all planes will be processed. #### 39.152.1 Commands This filter supports the all above options as commands. ### 39.153 maskedmax Merge the second and third input stream into output stream using absolute differences between second input stream and first input stream and absolute difference between third input stream and first input stream. The picked value will be from second input stream if second absolute difference is greater than first one or from third input stream otherwise. This filter accepts the following options: planes Set which planes will be processed as bitmap, unprocessed planes will be copied from first stream. By default value 0xf, all planes will be processed. #### 39.153.1 Commands This filter supports the all above options as commands. ### 39.154 maskedmerge Merge the first input stream with the second input stream using per pixel weights in the third input stream. A value of 0 in the third stream pixel component means that pixel component from first stream is returned unchanged, while maximum value (eg. 255 for 8-bit videos) means that pixel component from second stream is returned unchanged. Intermediate values define the amount of merging between both input stream’s pixel components. This filter accepts the following options: planes Set which planes will be processed as bitmap, unprocessed planes will be copied from first stream. By default value 0xf, all planes will be processed. #### 39.154.1 Commands This filter supports the all above options as commands. ### 39.155 maskedmin Merge the second and third input stream into output stream using absolute differences between second input stream and first input stream and absolute difference between third input stream and first input stream. The picked value will be from second input stream if second absolute difference is less than first one or from third input stream otherwise. This filter accepts the following options: planes Set which planes will be processed as bitmap, unprocessed planes will be copied from first stream. By default value 0xf, all planes will be processed. #### 39.155.1 Commands This filter supports the all above options as commands. ### 39.156 maskedthreshold Pick pixels comparing absolute difference of two video streams with fixed threshold. If absolute difference between pixel component of first and second video stream is equal or lower than user supplied threshold than pixel component from first video stream is picked, otherwise pixel component from second video stream is picked. This filter accepts the following options: threshold Set threshold used when picking pixels from absolute difference from two input video streams. planes Set which planes will be processed as bitmap, unprocessed planes will be copied from second stream. By default value 0xf, all planes will be processed. mode Set mode of filter operation. Can be `abs` or `diff`. Default is `abs`. #### 39.156.1 Commands This filter supports the all above options as commands. ### 39.157 maskfun Create mask from input video. For example it is useful to create motion masks after `tblend` filter. This filter accepts the following options: low Set low threshold. Any pixel component lower or exact than this value will be set to 0. high Set high threshold. Any pixel component higher than this value will be set to max value allowed for current pixel format. planes Set planes to filter, by default all available planes are filtered. fill Fill all frame pixels with this value. sum Set max average pixel value for frame. If sum of all pixel components is higher that this average, output frame will be completely filled with value set by fill option. Typically useful for scene changes when used in combination with `tblend` filter. #### 39.157.1 Commands This filter supports the all above options as commands. ### 39.158 mcdeint Apply motion-compensation deinterlacing. It needs one field per frame as input and must thus be used together with yadif=1/3 or equivalent. This filter accepts the following options: mode Set the deinterlacing mode. It accepts one of the following values: ‘fast’ ‘medium’ ‘slow’ use iterative motion estimation ‘extra\_slow’ like ‘slow’, but use multiple reference frames. Default value is ‘fast’. parity Set the picture field parity assumed for the input video. It must be one of the following values: ‘0, tff’ assume top field first ‘1, bff’ assume bottom field first Default value is ‘bff’. qp Set per-block quantization parameter (QP) used by the internal encoder. Higher values should result in a smoother motion vector field but less optimal individual vectors. Default value is 1. ### 39.159 median Pick median pixel from certain rectangle defined by radius. This filter accepts the following options: radius Set horizontal radius size. Default value is `1`. Allowed range is integer from 1 to 127. planes Set which planes to process. Default is `15`, which is all available planes. radiusV Set vertical radius size. Default value is `0`. Allowed range is integer from 0 to 127. If it is 0, value will be picked from horizontal `radius` option. percentile Set median percentile. Default value is `0.5`. Default value of `0.5` will pick always median values, while `0` will pick minimum values, and `1` maximum values. #### 39.159.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.160 mergeplanes Merge color channel components from several video streams. The filter accepts up to 4 input streams, and merge selected input planes to the output video. This filter accepts the following options: mapping Set input to output plane mapping. Default is `0`. The mappings is specified as a bitmap. It should be specified as a hexadecimal number in the form 0xAa\[Bb\[Cc\[Dd\]\]\]. ’Aa’ describes the mapping for the first plane of the output stream. ’A’ sets the number of the input stream to use (from 0 to 3), and ’a’ the plane number of the corresponding input to use (from 0 to 3). The rest of the mappings is similar, ’Bb’ describes the mapping for the output stream second plane, ’Cc’ describes the mapping for the output stream third plane and ’Dd’ describes the mapping for the output stream fourth plane. format Set output pixel format. Default is `yuva444p`. map0s map1s map2s map3s Set input to output stream mapping for output Nth plane. Default is `0`. map0p map1p map2p map3p Set input to output plane mapping for output Nth plane. Default is `0`. #### 39.160.1 Examples * Merge three gray video streams of same width and height into single video stream: \[a0\]\[a1\]\[a2\]mergeplanes=0x001020:yuv444p * Merge 1st yuv444p stream and 2nd gray video stream into yuva444p video stream: \[a0\]\[a1\]mergeplanes=0x00010210:yuva444p * Swap Y and A plane in yuva444p stream: format=yuva444p,mergeplanes=0x03010200:yuva444p * Swap U and V plane in yuv420p stream: format=yuv420p,mergeplanes=0x000201:yuv420p * Cast a rgb24 clip to yuv444p: format=rgb24,mergeplanes=0x000102:yuv444p ### 39.161 mestimate Estimate and export motion vectors using block matching algorithms. Motion vectors are stored in frame side data to be used by other filters. This filter accepts the following options: method Specify the motion estimation method. Accepts one of the following values: ‘esa’ Exhaustive search algorithm. ‘tss’ Three step search algorithm. ‘tdls’ Two dimensional logarithmic search algorithm. ‘ntss’ New three step search algorithm. ‘fss’ Four step search algorithm. ‘ds’ Diamond search algorithm. ‘hexbs’ Hexagon-based search algorithm. ‘epzs’ Enhanced predictive zonal search algorithm. ‘umh’ Uneven multi-hexagon search algorithm. Default value is ‘esa’. mb\_size Macroblock size. Default `16`. search\_param Search parameter. Default `7`. ### 39.162 midequalizer Apply Midway Image Equalization effect using two video streams. Midway Image Equalization adjusts a pair of images to have the same histogram, while maintaining their dynamics as much as possible. It’s useful for e.g. matching exposures from a pair of stereo cameras. This filter has two inputs and one output, which must be of same pixel format, but may be of different sizes. The output of filter is first input adjusted with midway histogram of both inputs. This filter accepts the following option: planes Set which planes to process. Default is `15`, which is all available planes. ### 39.163 minterpolate Convert the video to specified frame rate using motion interpolation. This filter accepts the following options: fps Specify the output frame rate. This can be rational e.g. `60000/1001`. Frames are dropped if fps is lower than source fps. Default `60`. mi\_mode Motion interpolation mode. Following values are accepted: ‘dup’ Duplicate previous or next frame for interpolating new ones. ‘blend’ Blend source frames. Interpolated frame is mean of previous and next frames. ‘mci’ Motion compensated interpolation. Following options are effective when this mode is selected: ‘mc\_mode’ Motion compensation mode. Following values are accepted: ‘obmc’ Overlapped block motion compensation. ‘aobmc’ Adaptive overlapped block motion compensation. Window weighting coefficients are controlled adaptively according to the reliabilities of the neighboring motion vectors to reduce oversmoothing. Default mode is ‘obmc’. ‘me\_mode’ Motion estimation mode. Following values are accepted: ‘bidir’ Bidirectional motion estimation. Motion vectors are estimated for each source frame in both forward and backward directions. ‘bilat’ Bilateral motion estimation. Motion vectors are estimated directly for interpolated frame. Default mode is ‘bilat’. ‘me’ The algorithm to be used for motion estimation. Following values are accepted: ‘esa’ Exhaustive search algorithm. ‘tss’ Three step search algorithm. ‘tdls’ Two dimensional logarithmic search algorithm. ‘ntss’ New three step search algorithm. ‘fss’ Four step search algorithm. ‘ds’ Diamond search algorithm. ‘hexbs’ Hexagon-based search algorithm. ‘epzs’ Enhanced predictive zonal search algorithm. ‘umh’ Uneven multi-hexagon search algorithm. Default algorithm is ‘epzs’. ‘mb\_size’ Macroblock size. Default `16`. ‘search\_param’ Motion estimation search parameter. Default `32`. ‘vsbmc’ Enable variable-size block motion compensation. Motion estimation is applied with smaller block sizes at object boundaries in order to make them less blurry. Default is `0` (disabled). scd Scene change detection method. Scene change leads motion vectors to be in random direction. Scene change detection replace interpolated frames by duplicate ones. May not be needed for other modes. Following values are accepted: ‘none’ Disable scene change detection. ‘fdiff’ Frame difference. Corresponding pixel values are compared and if it satisfies scd\_threshold scene change is detected. Default method is ‘fdiff’. scd\_threshold Scene change detection threshold. Default is `10.`. ### 39.164 mix Mix several video input streams into one video stream. A description of the accepted options follows. inputs The number of inputs. If unspecified, it defaults to 2. weights Specify weight of each input video stream as sequence. Each weight is separated by space. If number of weights is smaller than number of frames last specified weight will be used for all remaining unset weights. scale Specify scale, if it is set it will be multiplied with sum of each weight multiplied with pixel values to give final destination pixel value. By default scale is auto scaled to sum of weights. planes Set which planes to filter. Default is all. Allowed range is from 0 to 15. duration Specify how end of stream is determined. ‘longest’ The duration of the longest input. (default) ‘shortest’ The duration of the shortest input. ‘first’ The duration of the first input. #### 39.164.1 Commands This filter supports the following commands: weights scale planes Syntax is same as option with same name. ### 39.165 monochrome Convert video to gray using custom color filter. A description of the accepted options follows. cb Set the chroma blue spot. Allowed range is from -1 to 1. Default value is 0. cr Set the chroma red spot. Allowed range is from -1 to 1. Default value is 0. size Set the color filter size. Allowed range is from .1 to 10. Default value is 1. high Set the highlights strength. Allowed range is from 0 to 1. Default value is 0. #### 39.165.1 Commands This filter supports the all above options as commands. ### 39.166 morpho This filter allows to apply main morphological grayscale transforms, erode and dilate with arbitrary structures set in second input stream. Unlike naive implementation and much slower performance in erosion and dilation filters, when speed is critical `morpho` filter should be used instead. A description of accepted options follows, mode Set morphological transform to apply, can be: ‘erode’ ‘dilate’ ‘open’ ‘close’ ‘gradient’ ‘tophat’ ‘blackhat’ Default is `erode`. planes Set planes to filter, by default all planes except alpha are filtered. structure Set which structure video frames will be processed from second input stream, can be first or all. Default is all. The `morpho` filter also supports the framesync options. #### 39.166.1 Commands This filter supports same commands as options. ### 39.167 mpdecimate Drop frames that do not differ greatly from the previous frame in order to reduce frame rate. The main use of this filter is for very-low-bitrate encoding (e.g. streaming over dialup modem), but it could in theory be used for fixing movies that were inverse-telecined incorrectly. A description of the accepted options follows. max Set the maximum number of consecutive frames which can be dropped (if positive), or the minimum interval between dropped frames (if negative). If the value is 0, the frame is dropped disregarding the number of previous sequentially dropped frames. Default value is 0. keep Set the maximum number of consecutive similar frames to ignore before to start dropping them. If the value is 0, the frame is dropped disregarding the number of previous sequentially similar frames. Default value is 0. hi lo frac Set the dropping threshold values. Values for hi and lo are for 8x8 pixel blocks and represent actual pixel value differences, so a threshold of 64 corresponds to 1 unit of difference for each pixel, or the same spread out differently over the block. A frame is a candidate for dropping if no 8x8 blocks differ by more than a threshold of hi, and if no more than frac blocks (1 meaning the whole image) differ by more than a threshold of lo. Default value for hi is 64\*12, default value for lo is 64\*5, and default value for frac is 0.33. ### 39.168 msad Obtain the MSAD (Mean Sum of Absolute Differences) between two input videos. This filter takes two input videos. Both input videos must have the same resolution and pixel format for this filter to work correctly. Also it assumes that both inputs have the same number of frames, which are compared one by one. The obtained per component, average, min and max MSAD is printed through the logging system. The filter stores the calculated MSAD of each frame in frame metadata. This filter also supports the framesync options. In the below example the input file main.mpg being processed is compared with the reference file ref.mpg. ffmpeg -i main.mpg -i ref.mpg -lavfi msad -f null - ### 39.169 multiply Multiply first video stream pixels values with second video stream pixels values. The filter accepts the following options: scale Set the scale applied to second video stream. By default is `1`. Allowed range is from `0` to `9`. offset Set the offset applied to second video stream. By default is `0.5`. Allowed range is from `-1` to `1`. planes Specify planes from input video stream that will be processed. By default all planes are processed. #### 39.169.1 Commands This filter supports same commands as options. ### 39.170 negate Negate (invert) the input video. It accepts the following option: components Set components to negate. Available values for components are: ‘y’ ‘u’ ‘v’ ‘a’ ‘r’ ‘g’ ‘b’ negate\_alpha With value 1, it negates the alpha component, if present. Default value is 0. #### 39.170.1 Commands This filter supports same commands as options. ### 39.171 nlmeans Denoise frames using Non-Local Means algorithm. Each pixel is adjusted by looking for other pixels with similar contexts. This context similarity is defined by comparing their surrounding patches of size pxp. Patches are searched in an area of rxr around the pixel. Note that the research area defines centers for patches, which means some patches will be made of pixels outside that research area. The filter accepts the following options. s Set denoising strength. Default is 1.0. Must be in range \[1.0, 30.0\]. p Set patch size. Default is 7. Must be odd number in range \[0, 99\]. pc Same as p but for chroma planes. The default value is 0 and means automatic. r Set research size. Default is 15. Must be odd number in range \[0, 99\]. rc Same as r but for chroma planes. The default value is 0 and means automatic. ### 39.172 nnedi Deinterlace video using neural network edge directed interpolation. This filter accepts the following options: weights Mandatory option, without binary file filter can not work. Currently file can be found here: https://github.com/dubhater/vapoursynth-nnedi3/blob/master/src/nnedi3\_weights.bin deint Set which frames to deinterlace, by default it is `all`. Can be `all` or `interlaced`. field Set mode of operation. Can be one of the following: ‘af’ Use frame flags, both fields. ‘a’ Use frame flags, single field. ‘t’ Use top field only. ‘b’ Use bottom field only. ‘tf’ Use both fields, top first. ‘bf’ Use both fields, bottom first. planes Set which planes to process, by default filter process all frames. nsize Set size of local neighborhood around each pixel, used by the predictor neural network. Can be one of the following: ‘s8x6’ ‘s16x6’ ‘s32x6’ ‘s48x6’ ‘s8x4’ ‘s16x4’ ‘s32x4’ nns Set the number of neurons in predictor neural network. Can be one of the following: ‘n16’ ‘n32’ ‘n64’ ‘n128’ ‘n256’ qual Controls the number of different neural network predictions that are blended together to compute the final output value. Can be `fast`, default or `slow`. etype Set which set of weights to use in the predictor. Can be one of the following: ‘a, abs’ weights trained to minimize absolute error ‘s, mse’ weights trained to minimize squared error pscrn Controls whether or not the prescreener neural network is used to decide which pixels should be processed by the predictor neural network and which can be handled by simple cubic interpolation. The prescreener is trained to know whether cubic interpolation will be sufficient for a pixel or whether it should be predicted by the predictor nn. The computational complexity of the prescreener nn is much less than that of the predictor nn. Since most pixels can be handled by cubic interpolation, using the prescreener generally results in much faster processing. The prescreener is pretty accurate, so the difference between using it and not using it is almost always unnoticeable. Can be one of the following: ‘none’ ‘original’ ‘new’ ‘new2’ ‘new3’ Default is `new`. #### 39.172.1 Commands This filter supports same commands as options, excluding weights option. ### 39.173 noformat Force libavfilter not to use any of the specified pixel formats for the input to the next filter. It accepts the following parameters: pix\_fmts A ’|’-separated list of pixel format names, such as pix\_fmts=yuv420p|monow|rgb24". #### 39.173.1 Examples * Force libavfilter to use a format different from yuv420p for the input to the vflip filter: noformat=pix\_fmts=yuv420p,vflip * Convert the input video to any of the formats not contained in the list: noformat=yuv420p|yuv444p|yuv410p ### 39.174 noise Add noise on video input frame. The filter accepts the following options: all\_seed c0\_seed c1\_seed c2\_seed c3\_seed Set noise seed for specific pixel component or all pixel components in case of all\_seed. Default value is `123457`. all\_strength, alls c0\_strength, c0s c1\_strength, c1s c2\_strength, c2s c3\_strength, c3s Set noise strength for specific pixel component or all pixel components in case all\_strength. Default value is `0`. Allowed range is \[0, 100\]. all\_flags, allf c0\_flags, c0f c1\_flags, c1f c2\_flags, c2f c3\_flags, c3f Set pixel component flags or set flags for all components if all\_flags. Available values for component flags are: ‘a’ averaged temporal noise (smoother) ‘p’ mix random noise with a (semi)regular pattern ‘t’ temporal noise (noise pattern changes between frames) ‘u’ uniform noise (gaussian otherwise) #### 39.174.1 Examples Add temporal and uniform noise to input video: noise=alls=20:allf=t+u ### 39.175 normalize Normalize RGB video (aka histogram stretching, contrast stretching). See: https://en.wikipedia.org/wiki/Normalization\_(image\_processing) For each channel of each frame, the filter computes the input range and maps it linearly to the user-specified output range. The output range defaults to the full dynamic range from pure black to pure white. Temporal smoothing can be used on the input range to reduce flickering (rapid changes in brightness) caused when small dark or bright objects enter or leave the scene. This is similar to the auto-exposure (automatic gain control) on a video camera, and, like a video camera, it may cause a period of over- or under-exposure of the video. The R,G,B channels can be normalized independently, which may cause some color shifting, or linked together as a single channel, which prevents color shifting. Linked normalization preserves hue. Independent normalization does not, so it can be used to remove some color casts. Independent and linked normalization can be combined in any ratio. The normalize filter accepts the following options: blackpt whitept Colors which define the output range. The minimum input value is mapped to the blackpt. The maximum input value is mapped to the whitept. The defaults are black and white respectively. Specifying white for blackpt and black for whitept will give color-inverted, normalized video. Shades of grey can be used to reduce the dynamic range (contrast). Specifying saturated colors here can create some interesting effects. smoothing The number of previous frames to use for temporal smoothing. The input range of each channel is smoothed using a rolling average over the current frame and the smoothing previous frames. The default is 0 (no temporal smoothing). independence Controls the ratio of independent (color shifting) channel normalization to linked (color preserving) normalization. 0.0 is fully linked, 1.0 is fully independent. Defaults to 1.0 (fully independent). strength Overall strength of the filter. 1.0 is full strength. 0.0 is a rather expensive no-op. Defaults to 1.0 (full strength). #### 39.175.1 Commands This filter supports same commands as options, excluding smoothing option. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. #### 39.175.2 Examples Stretch video contrast to use the full dynamic range, with no temporal smoothing; may flicker depending on the source content: normalize=blackpt=black:whitept=white:smoothing=0 As above, but with 50 frames of temporal smoothing; flicker should be reduced, depending on the source content: normalize=blackpt=black:whitept=white:smoothing=50 As above, but with hue-preserving linked channel normalization: normalize=blackpt=black:whitept=white:smoothing=50:independence=0 As above, but with half strength: normalize=blackpt=black:whitept=white:smoothing=50:independence=0:strength=0.5 Map the darkest input color to red, the brightest input color to cyan: normalize=blackpt=red:whitept=cyan ### 39.176 null Pass the video source unchanged to the output. ### 39.177 ocr Optical Character Recognition This filter uses Tesseract for optical character recognition. To enable compilation of this filter, you need to configure FFmpeg with `--enable-libtesseract`. It accepts the following options: datapath Set datapath to tesseract data. Default is to use whatever was set at installation. language Set language, default is "eng". whitelist Set character whitelist. blacklist Set character blacklist. The filter exports recognized text as the frame metadata `lavfi.ocr.text`. The filter exports confidence of recognized words as the frame metadata `lavfi.ocr.confidence`. ### 39.178 ocv Apply a video transform using libopencv. To enable this filter, install the libopencv library and headers and configure FFmpeg with `--enable-libopencv`. It accepts the following parameters: filter\_name The name of the libopencv filter to apply. filter\_params The parameters to pass to the libopencv filter. If not specified, the default values are assumed. Refer to the official libopencv documentation for more precise information: http://docs.opencv.org/master/modules/imgproc/doc/filtering.html Several libopencv filters are supported; see the following subsections. #### 39.178.1 dilate Dilate an image by using a specific structuring element. It corresponds to the libopencv function `cvDilate`. It accepts the parameters: struct\_el|nb\_iterations. struct\_el represents a structuring element, and has the syntax: colsxrows+anchor\_xxanchor\_y/shape cols and rows represent the number of columns and rows of the structuring element, anchor\_x and anchor\_y the anchor point, and shape the shape for the structuring element. shape must be "rect", "cross", "ellipse", or "custom". If the value for shape is "custom", it must be followed by a string of the form "=filename". The file with name filename is assumed to represent a binary image, with each printable character corresponding to a bright pixel. When a custom shape is used, cols and rows are ignored, the number or columns and rows of the read file are assumed instead. The default value for struct\_el is "3x3+0x0/rect". nb\_iterations specifies the number of times the transform is applied to the image, and defaults to 1. Some examples: \# Use the default values ocv=dilate # Dilate using a structuring element with a 5x5 cross, iterating two times ocv=filter\_name=dilate:filter\_params=5x5+2x2/cross|2 # Read the shape from the file diamond.shape, iterating two times. # The file diamond.shape may contain a pattern of characters like this # \* # \*\*\* # \*\*\*\*\* # \*\*\* # \* # The specified columns and rows are ignored # but the anchor point coordinates are not ocv=dilate:0x0+2x2/custom=diamond.shape|2 #### 39.178.2 erode Erode an image by using a specific structuring element. It corresponds to the libopencv function `cvErode`. It accepts the parameters: struct\_el:nb\_iterations, with the same syntax and semantics as the dilate filter. #### 39.178.3 smooth Smooth the input video. The filter takes the following parameters: type|param1|param2|param3|param4. type is the type of smooth filter to apply, and must be one of the following values: "blur", "blur\_no\_scale", "median", "gaussian", or "bilateral". The default value is "gaussian". The meaning of param1, param2, param3, and param4 depends on the smooth type. param1 and param2 accept integer positive values or 0. param3 and param4 accept floating point values. The default value for param1 is 3. The default value for the other parameters is 0. These parameters correspond to the parameters assigned to the libopencv function `cvSmooth`. ### 39.179 oscilloscope 2D Video Oscilloscope. Useful to measure spatial impulse, step responses, chroma delays, etc. It accepts the following parameters: x Set scope center x position. y Set scope center y position. s Set scope size, relative to frame diagonal. t Set scope tilt/rotation. o Set trace opacity. tx Set trace center x position. ty Set trace center y position. tw Set trace width, relative to width of frame. th Set trace height, relative to height of frame. c Set which components to trace. By default it traces first three components. g Draw trace grid. By default is enabled. st Draw some statistics. By default is enabled. sc Draw scope. By default is enabled. #### 39.179.1 Commands This filter supports same commands as options. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. #### 39.179.2 Examples * Inspect full first row of video frame. oscilloscope=x=0.5:y=0:s=1 * Inspect full last row of video frame. oscilloscope=x=0.5:y=1:s=1 * Inspect full 5th line of video frame of height 1080. oscilloscope=x=0.5:y=5/1080:s=1 * Inspect full last column of video frame. oscilloscope=x=1:y=0.5:s=1:t=1 ### 39.180 overlay Overlay one video on top of another. It takes two inputs and has one output. The first input is the "main" video on which the second input is overlaid. It accepts the following parameters: A description of the accepted options follows. x y Set the expression for the x and y coordinates of the overlaid video on the main video. Default value is "0" for both expressions. In case the expression is invalid, it is set to a huge value (meaning that the overlay will not be displayed within the output visible area). eof\_action See framesync. eval Set when the expressions for x, and y are evaluated. It accepts the following values: ‘init’ only evaluate expressions once during the filter initialization or when a command is processed ‘frame’ evaluate expressions for each incoming frame Default value is ‘frame’. shortest See framesync. format Set the format for the output video. It accepts the following values: ‘yuv420’ force YUV 4:2:0 8-bit planar output ‘yuv420p10’ force YUV 4:2:0 10-bit planar output ‘yuv422’ force YUV 4:2:2 8-bit planar output ‘yuv422p10’ force YUV 4:2:2 10-bit planar output ‘yuv444’ force YUV 4:4:4 8-bit planar output ‘yuv444p10’ force YUV 4:4:4 10-bit planar output ‘rgb’ force RGB 8-bit packed output ‘gbrp’ force RGB 8-bit planar output ‘auto’ automatically pick format Default value is ‘yuv420’. repeatlast See framesync. alpha Set format of alpha of the overlaid video, it can be straight or premultiplied. Default is straight. The x, and y expressions can contain the following parameters. main\_w, W main\_h, H The main input width and height. overlay\_w, w overlay\_h, h The overlay input width and height. x y The computed values for x and y. They are evaluated for each new frame. hsub vsub horizontal and vertical chroma subsample values of the output format. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. n the number of input frame, starting from 0 pos the position in the file of the input frame, NAN if unknown; deprecated, do not use t The timestamp, expressed in seconds. It’s NAN if the input timestamp is unknown. This filter also supports the framesync options. Note that the n, t variables are available only when evaluation is done _per frame_, and will evaluate to NAN when eval is set to ‘init’. Be aware that frames are taken from each input video in timestamp order, hence, if their initial timestamps differ, it is a good idea to pass the two inputs through a setpts=PTS-STARTPTS filter to have them begin in the same zero timestamp, as the example for the movie filter does. You can chain together more overlays but you should test the efficiency of such approach. #### 39.180.1 Commands This filter supports the following commands: x y Modify the x and y of the overlay input. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. #### 39.180.2 Examples * Draw the overlay at 10 pixels from the bottom right corner of the main video: overlay=main\_w-overlay\_w-10:main\_h-overlay\_h-10 Using named options the example above becomes: overlay=x=main\_w-overlay\_w-10:y=main\_h-overlay\_h-10 * Insert a transparent PNG logo in the bottom left corner of the input, using the `ffmpeg` tool with the `-filter_complex` option: ffmpeg -i input -i logo -filter\_complex 'overlay=10:main\_h-overlay\_h-10' output * Insert 2 different transparent PNG logos (second logo on bottom right corner) using the `ffmpeg` tool: ffmpeg -i input -i logo1 -i logo2 -filter\_complex 'overlay=x=10:y=H-h-10,overlay=x=W-w-10:y=H-h-10' output * Add a transparent color layer on top of the main video; `WxH` must specify the size of the main input to the overlay filter: color=color=red@.3:size=WxH \[over\]; \[in\]\[over\] overlay \[out\] * Play an original video and a filtered version (here with the deshake filter) side by side using the `ffplay` tool: ffplay input.avi -vf 'split\[a\]\[b\]; \[a\]pad=iw\*2:ih\[src\]; \[b\]deshake\[filt\]; \[src\]\[filt\]overlay=w' The above command is the same as: ffplay input.avi -vf 'split\[b\], pad=iw\*2\[src\], \[b\]deshake, \[src\]overlay=w' * Make a sliding overlay appearing from the left to the right top part of the screen starting since time 2: overlay=x='if(gte(t,2), -w+(t-2)\*20, NAN)':y=0 * Compose output by putting two input videos side to side: ffmpeg -i left.avi -i right.avi -filter\_complex " nullsrc=size=200x100 \[background\]; \[0:v\] setpts=PTS-STARTPTS, scale=100x100 \[left\]; \[1:v\] setpts=PTS-STARTPTS, scale=100x100 \[right\]; \[background\]\[left\] overlay=shortest=1 \[background+left\]; \[background+left\]\[right\] overlay=shortest=1:x=100 \[left+right\] " * Mask 10-20 seconds of a video by applying the delogo filter to a section ffmpeg -i test.avi -codec:v:0 wmv2 -ar 11025 -b:v 9000k -vf '\[in\]split\[split\_main\]\[split\_delogo\];\[split\_delogo\]trim=start=360:end=371,delogo=0:0:640:480\[delogoed\];\[split\_main\]\[delogoed\]overlay=eof\_action=pass\[out\]' masked.avi * Chain several overlays in cascade: nullsrc=s=200x200 \[bg\]; testsrc=s=100x100, split=4 \[in0\]\[in1\]\[in2\]\[in3\]; \[in0\] lutrgb=r=0, \[bg\] overlay=0:0 \[mid0\]; \[in1\] lutrgb=g=0, \[mid0\] overlay=100:0 \[mid1\]; \[in2\] lutrgb=b=0, \[mid1\] overlay=0:100 \[mid2\]; \[in3\] null, \[mid2\] overlay=100:100 \[out0\] ### 39.181 owdenoise Apply Overcomplete Wavelet denoiser. The filter accepts the following options: depth Set depth. Larger depth values will denoise lower frequency components more, but slow down filtering. Must be an int in the range 8-16, default is `8`. luma\_strength, ls Set luma strength. Must be a double value in the range 0-1000, default is `1.0`. chroma\_strength, cs Set chroma strength. Must be a double value in the range 0-1000, default is `1.0`. ### 39.182 pad Add paddings to the input image, and place the original input at the provided x, y coordinates. It accepts the following parameters: width, w height, h Specify an expression for the size of the output image with the paddings added. If the value for width or height is 0, the corresponding input size is used for the output. The width expression can reference the value set by the height expression, and vice versa. The default value of width and height is 0. x y Specify the offsets to place the input image at within the padded area, with respect to the top/left border of the output image. The x expression can reference the value set by the y expression, and vice versa. The default value of x and y is 0. If x or y evaluate to a negative number, they’ll be changed so the input image is centered on the padded area. color Specify the color of the padded area. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of color is "black". eval Specify when to evaluate width, height, x and y expression. It accepts the following values: ‘init’ Only evaluate expressions once during the filter initialization or when a command is processed. ‘frame’ Evaluate expressions for each incoming frame. Default value is ‘init’. aspect Pad to aspect instead to a resolution. The value for the width, height, x, and y options are expressions containing the following constants: in\_w in\_h The input video width and height. iw ih These are the same as in\_w and in\_h. out\_w out\_h The output width and height (the size of the padded area), as specified by the width and height expressions. ow oh These are the same as out\_w and out\_h. x y The x and y offsets as specified by the x and y expressions, or NAN if not yet specified. a same as iw / ih sar input sample aspect ratio dar input display aspect ratio, it is the same as (iw / ih) \* sar hsub vsub The horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. #### 39.182.1 Examples * Add paddings with the color "violet" to the input video. The output video size is 640x480, and the top-left corner of the input video is placed at column 0, row 40 pad=640:480:0:40:violet The example above is equivalent to the following command: pad=width=640:height=480:x=0:y=40:color=violet * Pad the input to get an output with dimensions increased by 3/2, and put the input video at the center of the padded area: pad="3/2\*iw:3/2\*ih:(ow-iw)/2:(oh-ih)/2" * Pad the input to get a squared output with size equal to the maximum value between the input width and height, and put the input video at the center of the padded area: pad="max(iw\\,ih):ow:(ow-iw)/2:(oh-ih)/2" * Pad the input to get a final w/h ratio of 16:9: pad="ih\*16/9:ih:(ow-iw)/2:(oh-ih)/2" * In case of anamorphic video, in order to set the output display aspect correctly, it is necessary to use sar in the expression, according to the relation: (ih \* X / ih) \* sar = output\_dar X = output\_dar / sar Thus the previous example needs to be modified to: pad="ih\*16/9/sar:ih:(ow-iw)/2:(oh-ih)/2" * Double the output size and put the input video in the bottom-right corner of the output padded area: pad="2\*iw:2\*ih:ow-iw:oh-ih" ### 39.183 palettegen Generate one palette for a whole video stream. It accepts the following options: max\_colors Set the maximum number of colors to quantize in the palette. Note: the palette will still contain 256 colors; the unused palette entries will be black. reserve\_transparent Create a palette of 255 colors maximum and reserve the last one for transparency. Reserving the transparency color is useful for GIF optimization. If not set, the maximum of colors in the palette will be 256. You probably want to disable this option for a standalone image. Set by default. transparency\_color Set the color that will be used as background for transparency. stats\_mode Set statistics mode. It accepts the following values: ‘full’ Compute full frame histograms. ‘diff’ Compute histograms only for the part that differs from previous frame. This might be relevant to give more importance to the moving part of your input if the background is static. ‘single’ Compute new histogram for each frame. Default value is full. The filter also exports the frame metadata `lavfi.color_quant_ratio` (`nb_color_in / nb_color_out`) which you can use to evaluate the degree of color quantization of the palette. This information is also visible at info logging level. #### 39.183.1 Examples * Generate a representative palette of a given video using `ffmpeg`: ffmpeg -i input.mkv -vf palettegen palette.png ### 39.184 paletteuse Use a palette to downsample an input video stream. The filter takes two inputs: one video stream and a palette. The palette must be a 256 pixels image. It accepts the following options: dither Select dithering mode. Available algorithms are: ‘bayer’ Ordered 8x8 bayer dithering (deterministic) ‘heckbert’ Dithering as defined by Paul Heckbert in 1982 (simple error diffusion). Note: this dithering is sometimes considered "wrong" and is included as a reference. ‘floyd\_steinberg’ Floyd and Steingberg dithering (error diffusion) ‘sierra2’ Frankie Sierra dithering v2 (error diffusion) ‘sierra2\_4a’ Frankie Sierra dithering v2 "Lite" (error diffusion) ‘sierra3’ Frankie Sierra dithering v3 (error diffusion) ‘burkes’ Burkes dithering (error diffusion) ‘atkinson’ Atkinson dithering by Bill Atkinson at Apple Computer (error diffusion) ‘none’ Disable dithering. Default is sierra2\_4a. bayer\_scale When bayer dithering is selected, this option defines the scale of the pattern (how much the crosshatch pattern is visible). A low value means more visible pattern for less banding, and higher value means less visible pattern at the cost of more banding. The option must be an integer value in the range \[0,5\]. Default is 2. diff\_mode If set, define the zone to process ‘rectangle’ Only the changing rectangle will be reprocessed. This is similar to GIF cropping/offsetting compression mechanism. This option can be useful for speed if only a part of the image is changing, and has use cases such as limiting the scope of the error diffusal dither to the rectangle that bounds the moving scene (it leads to more deterministic output if the scene doesn’t change much, and as a result less moving noise and better GIF compression). Default is none. new Take new palette for each output frame. alpha\_threshold Sets the alpha threshold for transparency. Alpha values above this threshold will be treated as completely opaque, and values below this threshold will be treated as completely transparent. The option must be an integer value in the range \[0,255\]. Default is 128. #### 39.184.1 Examples * Use a palette (generated for example with palettegen) to encode a GIF using `ffmpeg`: ffmpeg -i input.mkv -i palette.png -lavfi paletteuse output.gif ### 39.185 perspective Correct perspective of video not recorded perpendicular to the screen. A description of the accepted parameters follows. x0 y0 x1 y1 x2 y2 x3 y3 Set coordinates expression for top left, top right, bottom left and bottom right corners. Default values are `0:0:W:0:0:H:W:H` with which perspective will remain unchanged. If the `sense` option is set to `source`, then the specified points will be sent to the corners of the destination. If the `sense` option is set to `destination`, then the corners of the source will be sent to the specified coordinates. The expressions can use the following variables: W H the width and height of video frame. in Input frame count. on Output frame count. interpolation Set interpolation for perspective correction. It accepts the following values: ‘linear’ ‘cubic’ Default value is ‘linear’. sense Set interpretation of coordinate options. It accepts the following values: ‘0, source’ Send point in the source specified by the given coordinates to the corners of the destination. ‘1, destination’ Send the corners of the source to the point in the destination specified by the given coordinates. Default value is ‘source’. eval Set when the expressions for coordinates x0,y0,...x3,y3 are evaluated. It accepts the following values: ‘init’ only evaluate expressions once during the filter initialization or when a command is processed ‘frame’ evaluate expressions for each incoming frame Default value is ‘init’. ### 39.186 phase Delay interlaced video by one field time so that the field order changes. The intended use is to fix PAL movies that have been captured with the opposite field order to the film-to-video transfer. A description of the accepted parameters follows. mode Set phase mode. It accepts the following values: ‘t’ Capture field order top-first, transfer bottom-first. Filter will delay the bottom field. ‘b’ Capture field order bottom-first, transfer top-first. Filter will delay the top field. ‘p’ Capture and transfer with the same field order. This mode only exists for the documentation of the other options to refer to, but if you actually select it, the filter will faithfully do nothing. ‘a’ Capture field order determined automatically by field flags, transfer opposite. Filter selects among ‘t’ and ‘b’ modes on a frame by frame basis using field flags. If no field information is available, then this works just like ‘u’. ‘u’ Capture unknown or varying, transfer opposite. Filter selects among ‘t’ and ‘b’ on a frame by frame basis by analyzing the images and selecting the alternative that produces best match between the fields. ‘T’ Capture top-first, transfer unknown or varying. Filter selects among ‘t’ and ‘p’ using image analysis. ‘B’ Capture bottom-first, transfer unknown or varying. Filter selects among ‘b’ and ‘p’ using image analysis. ‘A’ Capture determined by field flags, transfer unknown or varying. Filter selects among ‘t’, ‘b’ and ‘p’ using field flags and image analysis. If no field information is available, then this works just like ‘U’. This is the default mode. ‘U’ Both capture and transfer unknown or varying. Filter selects among ‘t’, ‘b’ and ‘p’ using image analysis only. #### 39.186.1 Commands This filter supports the all above options as commands. ### 39.187 photosensitivity Reduce various flashes in video, so to help users with epilepsy. It accepts the following options: frames, f Set how many frames to use when filtering. Default is 30. threshold, t Set detection threshold factor. Default is 1. Lower is stricter. skip Set how many pixels to skip when sampling frames. Default is 1. Allowed range is from 1 to 1024. bypass Leave frames unchanged. Default is disabled. ### 39.188 pixdesctest Pixel format descriptor test filter, mainly useful for internal testing. The output video should be equal to the input video. For example: format=monow, pixdesctest can be used to test the monowhite pixel format descriptor definition. ### 39.189 pixelize Apply pixelization to video stream. The filter accepts the following options: width, w height, h Set block dimensions that will be used for pixelization. Default value is `16`. mode, m Set the mode of pixelization used. Possible values are: ‘avg’ ‘min’ ‘max’ Default value is `avg`. planes, p Set what planes to filter. Default is to filter all planes. #### 39.189.1 Commands This filter supports all options as commands. ### 39.190 pixscope Display sample values of color channels. Mainly useful for checking color and levels. Minimum supported resolution is 640x480. The filters accept the following options: x Set scope X position, relative offset on X axis. y Set scope Y position, relative offset on Y axis. w Set scope width. h Set scope height. o Set window opacity. This window also holds statistics about pixel area. wx Set window X position, relative offset on X axis. wy Set window Y position, relative offset on Y axis. #### 39.190.1 Commands This filter supports same commands as options. ### 39.191 pp Enable the specified chain of postprocessing subfilters using libpostproc. This library should be automatically selected with a GPL build (`--enable-gpl`). Subfilters must be separated by ’/’ and can be disabled by prepending a ’-’. Each subfilter and some options have a short and a long name that can be used interchangeably, i.e. dr/dering are the same. The filters accept the following options: subfilters Set postprocessing subfilters string. All subfilters share common options to determine their scope: a/autoq Honor the quality commands for this subfilter. c/chrom Do chrominance filtering, too (default). y/nochrom Do luma filtering only (no chrominance). n/noluma Do chrominance filtering only (no luma). These options can be appended after the subfilter name, separated by a ’|’. Available subfilters are: hb/hdeblock\[|difference\[|flatness\]\] Horizontal deblocking filter difference Difference factor where higher values mean more deblocking (default: `32`). flatness Flatness threshold where lower values mean more deblocking (default: `39`). vb/vdeblock\[|difference\[|flatness\]\] Vertical deblocking filter difference Difference factor where higher values mean more deblocking (default: `32`). flatness Flatness threshold where lower values mean more deblocking (default: `39`). ha/hadeblock\[|difference\[|flatness\]\] Accurate horizontal deblocking filter difference Difference factor where higher values mean more deblocking (default: `32`). flatness Flatness threshold where lower values mean more deblocking (default: `39`). va/vadeblock\[|difference\[|flatness\]\] Accurate vertical deblocking filter difference Difference factor where higher values mean more deblocking (default: `32`). flatness Flatness threshold where lower values mean more deblocking (default: `39`). The horizontal and vertical deblocking filters share the difference and flatness values so you cannot set different horizontal and vertical thresholds. h1/x1hdeblock Experimental horizontal deblocking filter v1/x1vdeblock Experimental vertical deblocking filter dr/dering Deringing filter tn/tmpnoise\[|threshold1\[|threshold2\[|threshold3\]\]\], temporal noise reducer threshold1 larger -> stronger filtering threshold2 larger -> stronger filtering threshold3 larger -> stronger filtering al/autolevels\[:f/fullyrange\], automatic brightness / contrast correction f/fullyrange Stretch luma to `0-255`. lb/linblenddeint Linear blend deinterlacing filter that deinterlaces the given block by filtering all lines with a `(1 2 1)` filter. li/linipoldeint Linear interpolating deinterlacing filter that deinterlaces the given block by linearly interpolating every second line. ci/cubicipoldeint Cubic interpolating deinterlacing filter deinterlaces the given block by cubically interpolating every second line. md/mediandeint Median deinterlacing filter that deinterlaces the given block by applying a median filter to every second line. fd/ffmpegdeint FFmpeg deinterlacing filter that deinterlaces the given block by filtering every second line with a `(-1 4 2 4 -1)` filter. l5/lowpass5 Vertically applied FIR lowpass deinterlacing filter that deinterlaces the given block by filtering all lines with a `(-1 2 6 2 -1)` filter. fq/forceQuant\[|quantizer\] Overrides the quantizer table from the input with the constant quantizer you specify. quantizer Quantizer to use de/default Default pp filter combination (`hb|a,vb|a,dr|a`) fa/fast Fast pp filter combination (`h1|a,v1|a,dr|a`) ac High quality pp filter combination (`ha|a|128|7,va|a,dr|a`) #### 39.191.1 Examples * Apply horizontal and vertical deblocking, deringing and automatic brightness/contrast: pp=hb/vb/dr/al * Apply default filters without brightness/contrast correction: pp=de/-al * Apply default filters and temporal denoiser: pp=default/tmpnoise|1|2|3 * Apply deblocking on luma only, and switch vertical deblocking on or off automatically depending on available CPU time: pp=hb|y/vb|a ### 39.192 pp7 Apply Postprocessing filter 7. It is variant of the spp filter, similar to spp = 6 with 7 point DCT, where only the center sample is used after IDCT. The filter accepts the following options: qp Force a constant quantization parameter. It accepts an integer in range 0 to 63. If not set, the filter will use the QP from the video stream (if available). mode Set thresholding mode. Available modes are: ‘hard’ Set hard thresholding. ‘soft’ Set soft thresholding (better de-ringing effect, but likely blurrier). ‘medium’ Set medium thresholding (good results, default). ### 39.193 premultiply Apply alpha premultiply effect to input video stream using first plane of second stream as alpha. Both streams must have same dimensions and same pixel format. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. inplace Do not require 2nd input for processing, instead use alpha plane from input stream. ### 39.194 prewitt Apply prewitt operator to input video stream. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. scale Set value which will be multiplied with filtered result. delta Set value which will be added to filtered result. #### 39.194.1 Commands This filter supports the all above options as commands. ### 39.195 pseudocolor Alter frame colors in video with pseudocolors. This filter accepts the following options: c0 set pixel first component expression c1 set pixel second component expression c2 set pixel third component expression c3 set pixel fourth component expression, corresponds to the alpha component index, i set component to use as base for altering colors preset, p Pick one of built-in LUTs. By default is set to none. Available LUTs: ‘magma’ ‘inferno’ ‘plasma’ ‘viridis’ ‘turbo’ ‘cividis’ ‘range1’ ‘range2’ ‘shadows’ ‘highlights’ ‘solar’ ‘nominal’ ‘preferred’ ‘total’ ‘spectral’ ‘cool’ ‘heat’ ‘fiery’ ‘blues’ ‘green’ ‘helix’ opacity Set opacity of output colors. Allowed range is from 0 to 1. Default value is set to 1. Each of the expression options specifies the expression to use for computing the lookup table for the corresponding pixel component values. The expressions can contain the following constants and functions: w h The input width and height. val The input value for the pixel component. ymin, umin, vmin, amin The minimum allowed component value. ymax, umax, vmax, amax The maximum allowed component value. All expressions default to "val". #### 39.195.1 Commands This filter supports the all above options as commands. #### 39.195.2 Examples * Change too high luma values to gradient: pseudocolor="'if(between(val,ymax,amax),lerp(ymin,ymax,(val-ymax)/(amax-ymax)),-1):if(between(val,ymax,amax),lerp(umax,umin,(val-ymax)/(amax-ymax)),-1):if(between(val,ymax,amax),lerp(vmin,vmax,(val-ymax)/(amax-ymax)),-1):-1'" ### 39.196 psnr Obtain the average, maximum and minimum PSNR (Peak Signal to Noise Ratio) between two input videos. This filter takes in input two input videos, the first input is considered the "main" source and is passed unchanged to the output. The second input is used as a "reference" video for computing the PSNR. Both video inputs must have the same resolution and pixel format for this filter to work correctly. Also it assumes that both inputs have the same number of frames, which are compared one by one. The obtained average PSNR is printed through the logging system. The filter stores the accumulated MSE (mean squared error) of each frame, and at the end of the processing it is averaged across all frames equally, and the following formula is applied to obtain the PSNR: PSNR = 10\*log10(MAX^2/MSE) Where MAX is the average of the maximum values of each component of the image. The description of the accepted parameters follows. stats\_file, f If specified the filter will use the named file to save the PSNR of each individual frame. When filename equals "-" the data is sent to standard output. stats\_version Specifies which version of the stats file format to use. Details of each format are written below. Default value is 1. stats\_add\_max Determines whether the max value is output to the stats log. Default value is 0. Requires stats\_version >= 2. If this is set and stats\_version < 2, the filter will return an error. This filter also supports the framesync options. The file printed if stats\_file is selected, contains a sequence of key/value pairs of the form key:value for each compared couple of frames. If a stats\_version greater than 1 is specified, a header line precedes the list of per-frame-pair stats, with key value pairs following the frame format with the following parameters: psnr\_log\_version The version of the log file format. Will match stats\_version. fields A comma separated list of the per-frame-pair parameters included in the log. A description of each shown per-frame-pair parameter follows: n sequential number of the input frame, starting from 1 mse\_avg Mean Square Error pixel-by-pixel average difference of the compared frames, averaged over all the image components. mse\_y, mse\_u, mse\_v, mse\_r, mse\_g, mse\_b, mse\_a Mean Square Error pixel-by-pixel average difference of the compared frames for the component specified by the suffix. psnr\_y, psnr\_u, psnr\_v, psnr\_r, psnr\_g, psnr\_b, psnr\_a Peak Signal to Noise ratio of the compared frames for the component specified by the suffix. max\_avg, max\_y, max\_u, max\_v Maximum allowed value for each channel, and average over all channels. #### 39.196.1 Examples * For example: movie=ref\_movie.mpg, setpts=PTS-STARTPTS \[main\]; \[main\]\[ref\] psnr="stats\_file=stats.log" \[out\] On this example the input file being processed is compared with the reference file ref\_movie.mpg. The PSNR of each individual frame is stored in stats.log. * Another example with different containers: ffmpeg -i main.mpg -i ref.mkv -lavfi "\[0:v\]settb=AVTB,setpts=PTS-STARTPTS\[main\];\[1:v\]settb=AVTB,setpts=PTS-STARTPTS\[ref\];\[main\]\[ref\]psnr" -f null - ### 39.197 pullup Pulldown reversal (inverse telecine) filter, capable of handling mixed hard-telecine, 24000/1001 fps progressive, and 30000/1001 fps progressive content. The pullup filter is designed to take advantage of future context in making its decisions. This filter is stateless in the sense that it does not lock onto a pattern to follow, but it instead looks forward to the following fields in order to identify matches and rebuild progressive frames. To produce content with an even framerate, insert the fps filter after pullup, use `fps=24000/1001` if the input frame rate is 29.97fps, `fps=24` for 30fps and the (rare) telecined 25fps input. The filter accepts the following options: jl jr jt jb These options set the amount of "junk" to ignore at the left, right, top, and bottom of the image, respectively. Left and right are in units of 8 pixels, while top and bottom are in units of 2 lines. The default is 8 pixels on each side. sb Set the strict breaks. Setting this option to 1 will reduce the chances of filter generating an occasional mismatched frame, but it may also cause an excessive number of frames to be dropped during high motion sequences. Conversely, setting it to -1 will make filter match fields more easily. This may help processing of video where there is slight blurring between the fields, but may also cause there to be interlaced frames in the output. Default value is `0`. mp Set the metric plane to use. It accepts the following values: ‘l’ Use luma plane. ‘u’ Use chroma blue plane. ‘v’ Use chroma red plane. This option may be set to use chroma plane instead of the default luma plane for doing filter’s computations. This may improve accuracy on very clean source material, but more likely will decrease accuracy, especially if there is chroma noise (rainbow effect) or any grayscale video. The main purpose of setting mp to a chroma plane is to reduce CPU load and make pullup usable in realtime on slow machines. For best results (without duplicated frames in the output file) it is necessary to change the output frame rate. For example, to inverse telecine NTSC input: ffmpeg -i input -vf pullup -r 24000/1001 ... ### 39.198 qp Change video quantization parameters (QP). The filter accepts the following option: qp Set expression for quantization parameter. The expression is evaluated through the eval API and can contain, among others, the following constants: known 1 if index is not 129, 0 otherwise. qp Sequential index starting from -129 to 128. #### 39.198.1 Examples * Some equation like: qp=2+2\*sin(PI\*qp) ### 39.199 qrencode Generate a QR code using the libqrencode library (see https://fukuchi.org/works/qrencode/), and overlay it on top of the current frame. To enable the compilation of this filter, you need to configure FFmpeg with `--enable-libqrencode`. The QR code is generated from the provided text or text pattern. The corresponding QR code is scaled and overlayed into the video output according to the specified options. In case no text is specified, no QR code is overlaied. This filter accepts the following options: qrcode\_width, q padded\_qrcode\_width, Q Specify an expression for the width of the rendered QR code, with and without padding. The qrcode\_width expression can reference the value set by the padded\_qrcode\_width expression, and vice versa. By default padded\_qrcode\_width is set to qrcode\_width, meaning that there is no padding. These expressions are evaluated for each new frame. See the qrencode Expressions section for details. x y Specify an expression for positioning the padded QR code top-left corner. The x expression can reference the value set by the y expression, and vice. By default x and y are set set to 0, meaning that the QR code is placed in the top left corner of the input. These expressions are evaluated for each new frame. See the qrencode Expressions section for details. case\_sensitive, cs Instruct libqrencode to use case sensitive encoding. This is enabled by default. This can be disabled to reduce the QR encoding size. level, l Specify the QR encoding error correction level. With an higher correction level, the encoding size will increase but the code will be more robust to corruption. Lower level is L. It accepts the following values: ‘L’ ‘M’ ‘Q’ ‘H’ expansion Select how the input text is expanded. Can be either `none`, or `normal` (default). See the qrencode Text expansion section below for details. text textfile Define the text to be rendered. In case neither is specified, no QR is encoded (just an empty colored frame). In case expansion is enabled, the text is treated as a text template, using the qrencode expansion mechanism. See the qrencode Text expansion section below for details. background\_color, bc foreground\_color, fc Set the QR code and background color. The default value of foreground\_color is "black", the default value of background\_color is "white". For the syntax of the color options, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. #### 39.199.1 qrencode Expressions The expressions set by the options contain the following constants and functions. dar input display aspect ratio, it is the same as (w / h) \* sar duration the current frame’s duration, in seconds hsub vsub horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. main\_h, H the input height main\_w, W the input width n the number of input frame, starting from 0 pict\_type a number representing the picture type qr\_w, w the width of the encoded QR code rendered\_qr\_w, q rendered\_padded\_qr\_w, Q the width of the rendered QR code, without and without padding. These parameters allow the q and Q expressions to refer to each other, so you can for example specify `q=3/4*Q`. rand(min, max) return a random number included between min and max sar the input sample aspect ratio t timestamp expressed in seconds, NAN if the input timestamp is unknown x y the x and y offset coordinates where the text is drawn. These parameters allow the x and y expressions to refer to each other, so you can for example specify `y=x/dar`. #### 39.199.2 qrencode Text expansion If expansion is set to `none`, the text is printed verbatim. If expansion is set to `normal` (which is the default), the following expansion mechanism is used. The backslash character ‘\\’, followed by any character, always expands to the second character. Sequences of the form `%{...}` are expanded. The text between the braces is a function name, possibly followed by arguments separated by ’:’. If the arguments contain special characters or delimiters (’:’ or ’}’), they should be escaped. Note that they probably must also be escaped as the value for the text option in the filter argument string and as the filter argument in the filtergraph description, and possibly also for the shell, that makes up to four levels of escaping; using a text file with the textfile option avoids these problems. The following functions are available: `n, frame_num` return the frame number `pts` Return the presentation timestamp of the current frame. It can take up to two arguments. The first argument is the format of the timestamp; it defaults to `flt` for seconds as a decimal number with microsecond accuracy; `hms` stands for a formatted \[-\]HH:MM:SS.mmm timestamp with millisecond accuracy. `gmtime` stands for the timestamp of the frame formatted as UTC time; `localtime` stands for the timestamp of the frame formatted as local time zone time. If the format is set to `hms24hh`, the time is formatted in 24h format (00-23). The second argument is an offset added to the timestamp. If the format is set to `localtime` or `gmtime`, a third argument may be supplied: a `strftime` C function format string. By default, YYYY-MM-DD HH:MM:SS format will be used. `expr, e` Evaluate the expression’s value and output as a double. It must take one argument specifying the expression to be evaluated, accepting the constants and functions defined in qrencode\_expressions. `expr_formatted, ef` Evaluate the expression’s value and output as a formatted string. The first argument is the expression to be evaluated, just as for the expr function. The second argument specifies the output format. Allowed values are ‘x’, ‘X’, ‘d’ and ‘u’. They are treated exactly as in the `printf` function. The third parameter is optional and sets the number of positions taken by the output. It can be used to add padding with zeros from the left. `gmtime` The time at which the filter is running, expressed in UTC. It can accept an argument: a `strftime` C function format string. The format string is extended to support the variable %\[1-6\]N which prints fractions of the second with optionally specified number of digits. `localtime` The time at which the filter is running, expressed in the local time zone. It can accept an argument: a `strftime` C function format string. The format string is extended to support the variable %\[1-6\]N which prints fractions of the second with optionally specified number of digits. `metadata` Frame metadata. Takes one or two arguments. The first argument is mandatory and specifies the metadata key. The second argument is optional and specifies a default value, used when the metadata key is not found or empty. Available metadata can be identified by inspecting entries starting with TAG included within each frame section printed by running `ffprobe -show_frames`. String metadata generated in filters leading to the qrencode filter are also available. `rand(min, max)` return a random number included between min and max #### 39.199.3 Examples * Generate a QR code encoding the specified text with the default size, overalaid in the top left corner of the input video, with the default size: qrencode=text=www.ffmpeg.org * Same as below, but select blue on pink colors: qrencode=text=www.ffmpeg.org:bc=pink@0.5:fc=blue * Place the QR code in the bottom right corner of the input video: qrencode=text=www.ffmpeg.org:x=W-Q:y=H-Q * Generate a QR code with width of 200 pixels and padding, making the padded width 4/3 of the QR code width: qrencode=text=www.ffmpeg.org:q=200:Q=4/3\*q * Generate a QR code with padded width of 200 pixels and padding, making the QR code width 3/4 of the padded width: qrencode=text=www.ffmpeg.org:Q=200:q=3/4\*Q * Make the QR code a fraction of the input video width: qrencode=text=www.ffmpeg.org:q=W/5 * Generate a QR code encoding the frame number: qrencode=text=%{n} * Generate a QR code encoding the GMT timestamp: qrencode=text=%{gmtime} * Generate a QR code encoding the timestamp expressed as a float: qrencode=text=%{pts} ### 39.200 quirc Identify and decode a QR code using the libquirc library (see https://github.com/dlbeer/quirc/), and print the identified QR codes positions and payload as metadata. To enable the compilation of this filter, you need to configure FFmpeg with `--enable-libquirc`. For each found QR code in the input video, some metadata entries are added with the prefix lavfi.quirc.N, where N is the index, starting from 0, associated to the QR code. A description of each metadata value follows: lavfi.quirc.count the number of found QR codes, it is not set in case none was found lavfi.quirc.N.corner.M.x lavfi.quirc.N.coreer.M.y the x/y positions of the four corners of the square containing the QR code, where M is the index of the corner starting from 0 lavfi.quirc.N.payload the payload of the QR code ### 39.201 random Flush video frames from internal cache of frames into a random order. No frame is discarded. Inspired by frei0r nervous filter. frames Set size in number of frames of internal cache, in range from `2` to `512`. Default is `30`. seed Set seed for random number generator, must be an integer included between `0` and `UINT32_MAX`. If not specified, or if explicitly set to less than `0`, the filter will try to use a good random seed on a best effort basis. ### 39.202 readeia608 Read closed captioning (EIA-608) information from the top lines of a video frame. This filter adds frame metadata for `lavfi.readeia608.X.cc` and `lavfi.readeia608.X.line`, where `X` is the number of the identified line with EIA-608 data (starting from 0). A description of each metadata value follows: lavfi.readeia608.X.cc The two bytes stored as EIA-608 data (printed in hexadecimal). lavfi.readeia608.X.line The number of the line on which the EIA-608 data was identified and read. This filter accepts the following options: scan\_min Set the line to start scanning for EIA-608 data. Default is `0`. scan\_max Set the line to end scanning for EIA-608 data. Default is `29`. spw Set the ratio of width reserved for sync code detection. Default is `0.27`. Allowed range is `[0.1 - 0.7]`. chp Enable checking the parity bit. In the event of a parity error, the filter will output `0x00` for that character. Default is false. lp Lowpass lines prior to further processing. Default is enabled. #### 39.202.1 Commands This filter supports the all above options as commands. #### 39.202.2 Examples * Output a csv with presentation time and the first two lines of identified EIA-608 captioning data. ffprobe -f lavfi -i movie=captioned\_video.mov,readeia608 -show\_entries frame=pts\_time:frame\_tags=lavfi.readeia608.0.cc,lavfi.readeia608.1.cc -of csv ### 39.203 readvitc Read vertical interval timecode (VITC) information from the top lines of a video frame. The filter adds frame metadata key `lavfi.readvitc.tc_str` with the timecode value, if a valid timecode has been detected. Further metadata key `lavfi.readvitc.found` is set to 0/1 depending on whether timecode data has been found or not. This filter accepts the following options: scan\_max Set the maximum number of lines to scan for VITC data. If the value is set to `-1` the full video frame is scanned. Default is `45`. thr\_b Set the luma threshold for black. Accepts float numbers in the range \[0.0,1.0\], default value is `0.2`. The value must be equal or less than `thr_w`. thr\_w Set the luma threshold for white. Accepts float numbers in the range \[0.0,1.0\], default value is `0.6`. The value must be equal or greater than `thr_b`. #### 39.203.1 Examples * Detect and draw VITC data onto the video frame; if no valid VITC is detected, draw `--:--:--:--` as a placeholder: ffmpeg -i input.avi -filter:v 'readvitc,drawtext=fontfile=FreeMono.ttf:text=%{metadata\\\\:lavfi.readvitc.tc\_str\\\\:--\\\\\\\\\\\\:--\\\\\\\\\\\\:--\\\\\\\\\\\\:--}:x=(w-tw)/2:y=400-ascent' ### 39.204 remap Remap pixels using 2nd: Xmap and 3rd: Ymap input video stream. Destination pixel at position (X, Y) will be picked from source (x, y) position where x = Xmap(X, Y) and y = Ymap(X, Y). If mapping values are out of range, zero value for pixel will be used for destination pixel. Xmap and Ymap input video streams must be of same dimensions. Output video stream will have Xmap/Ymap video stream dimensions. Xmap and Ymap input video streams are 16bit depth, single channel. format Specify pixel format of output from this filter. Can be `color` or `gray`. Default is `color`. fill Specify the color of the unmapped pixels. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. Default color is `black`. ### 39.205 removegrain The removegrain filter is a spatial denoiser for progressive video. m0 Set mode for the first plane. m1 Set mode for the second plane. m2 Set mode for the third plane. m3 Set mode for the fourth plane. Range of mode is from 0 to 24. Description of each mode follows: 0 Leave input plane unchanged. Default. 1 Clips the pixel with the minimum and maximum of the 8 neighbour pixels. 2 Clips the pixel with the second minimum and maximum of the 8 neighbour pixels. 3 Clips the pixel with the third minimum and maximum of the 8 neighbour pixels. 4 Clips the pixel with the fourth minimum and maximum of the 8 neighbour pixels. This is equivalent to a median filter. 5 Line-sensitive clipping giving the minimal change. 6 Line-sensitive clipping, intermediate. 7 Line-sensitive clipping, intermediate. 8 Line-sensitive clipping, intermediate. 9 Line-sensitive clipping on a line where the neighbours pixels are the closest. 10 Replaces the target pixel with the closest neighbour. 11 \[1 2 1\] horizontal and vertical kernel blur. 12 Same as mode 11. 13 Bob mode, interpolates top field from the line where the neighbours pixels are the closest. 14 Bob mode, interpolates bottom field from the line where the neighbours pixels are the closest. 15 Bob mode, interpolates top field. Same as 13 but with a more complicated interpolation formula. 16 Bob mode, interpolates bottom field. Same as 14 but with a more complicated interpolation formula. 17 Clips the pixel with the minimum and maximum of respectively the maximum and minimum of each pair of opposite neighbour pixels. 18 Line-sensitive clipping using opposite neighbours whose greatest distance from the current pixel is minimal. 19 Replaces the pixel with the average of its 8 neighbours. 20 Averages the 9 pixels (\[1 1 1\] horizontal and vertical blur). 21 Clips pixels using the averages of opposite neighbour. 22 Same as mode 21 but simpler and faster. 23 Small edge and halo removal, but reputed useless. 24 Similar as 23. ### 39.206 removelogo Suppress a TV station logo, using an image file to determine which pixels comprise the logo. It works by filling in the pixels that comprise the logo with neighboring pixels. The filter accepts the following options: filename, f Set the filter bitmap file, which can be any image format supported by libavformat. The width and height of the image file must match those of the video stream being processed. Pixels in the provided bitmap image with a value of zero are not considered part of the logo, non-zero pixels are considered part of the logo. If you use white (255) for the logo and black (0) for the rest, you will be safe. For making the filter bitmap, it is recommended to take a screen capture of a black frame with the logo visible, and then using a threshold filter followed by the erode filter once or twice. If needed, little splotches can be fixed manually. Remember that if logo pixels are not covered, the filter quality will be much reduced. Marking too many pixels as part of the logo does not hurt as much, but it will increase the amount of blurring needed to cover over the image and will destroy more information than necessary, and extra pixels will slow things down on a large logo. ### 39.207 repeatfields This filter uses the repeat\_field flag from the Video ES headers and hard repeats fields based on its value. ### 39.208 reverse Reverse a video clip. Warning: This filter requires memory to buffer the entire clip, so trimming is suggested. #### 39.208.1 Examples * Take the first 5 seconds of a clip, and reverse it. trim=end=5,reverse ### 39.209 rgbashift Shift R/G/B/A pixels horizontally and/or vertically. The filter accepts the following options: rh Set amount to shift red horizontally. rv Set amount to shift red vertically. gh Set amount to shift green horizontally. gv Set amount to shift green vertically. bh Set amount to shift blue horizontally. bv Set amount to shift blue vertically. ah Set amount to shift alpha horizontally. av Set amount to shift alpha vertically. edge Set edge mode, can be smear, default, or warp. #### 39.209.1 Commands This filter supports the all above options as commands. ### 39.210 roberts Apply roberts cross operator to input video stream. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. scale Set value which will be multiplied with filtered result. delta Set value which will be added to filtered result. #### 39.210.1 Commands This filter supports the all above options as commands. ### 39.211 rotate Rotate video by an arbitrary angle expressed in radians. The filter accepts the following options: A description of the optional parameters follows. angle, a Set an expression for the angle by which to rotate the input video clockwise, expressed as a number of radians. A negative value will result in a counter-clockwise rotation. By default it is set to "0". This expression is evaluated for each frame. out\_w, ow Set the output width expression, default value is "iw". This expression is evaluated just once during configuration. out\_h, oh Set the output height expression, default value is "ih". This expression is evaluated just once during configuration. bilinear Enable bilinear interpolation if set to 1, a value of 0 disables it. Default value is 1. fillcolor, c Set the color used to fill the output area not covered by the rotated image. For the general syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. If the special value "none" is selected then no background is printed (useful for example if the background is never shown). Default value is "black". The expressions for the angle and the output size can contain the following constants and functions: n sequential number of the input frame, starting from 0. It is always NAN before the first frame is filtered. t time in seconds of the input frame, it is set to 0 when the filter is configured. It is always NAN before the first frame is filtered. hsub vsub horizontal and vertical chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. in\_w, iw in\_h, ih the input video width and height out\_w, ow out\_h, oh the output width and height, that is the size of the padded area as specified by the width and height expressions rotw(a) roth(a) the minimal width/height required for completely containing the input video rotated by a radians. These are only available when computing the out\_w and out\_h expressions. #### 39.211.1 Examples * Rotate the input by PI/6 radians clockwise: rotate=PI/6 * Rotate the input by PI/6 radians counter-clockwise: rotate=-PI/6 * Rotate the input by 45 degrees clockwise: rotate=45\*PI/180 * Apply a constant rotation with period T, starting from an angle of PI/3: rotate=PI/3+2\*PI\*t/T * Make the input video rotation oscillating with a period of T seconds and an amplitude of A radians: rotate=A\*sin(2\*PI/T\*t) * Rotate the video, output size is chosen so that the whole rotating input video is always completely contained in the output: rotate='2\*PI\*t:ow=hypot(iw,ih):oh=ow' * Rotate the video, reduce the output size so that no background is ever shown: rotate=2\*PI\*t:ow='min(iw,ih)/sqrt(2)':oh=ow:c=none #### 39.211.2 Commands The filter supports the following commands: a, angle Set the angle expression. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.212 sab Apply Shape Adaptive Blur. The filter accepts the following options: luma\_radius, lr Set luma blur filter strength, must be a value in range 0.1-4.0, default value is 1.0. A greater value will result in a more blurred image, and in slower processing. luma\_pre\_filter\_radius, lpfr Set luma pre-filter radius, must be a value in the 0.1-2.0 range, default value is 1.0. luma\_strength, ls Set luma maximum difference between pixels to still be considered, must be a value in the 0.1-100.0 range, default value is 1.0. chroma\_radius, cr Set chroma blur filter strength, must be a value in range -0.9-4.0. A greater value will result in a more blurred image, and in slower processing. chroma\_pre\_filter\_radius, cpfr Set chroma pre-filter radius, must be a value in the -0.9-2.0 range. chroma\_strength, cs Set chroma maximum difference between pixels to still be considered, must be a value in the -0.9-100.0 range. Each chroma option value, if not explicitly specified, is set to the corresponding luma option value. ### 39.213 scale Scale (resize) the input video, using the libswscale library. The scale filter forces the output display aspect ratio to be the same of the input, by changing the output sample aspect ratio. If the input image format is different from the format requested by the next filter, the scale filter will convert the input to the requested format. #### 39.213.1 Options The filter accepts the following options, any of the options supported by the libswscale scaler, as well as any of the framesync options. See (ffmpeg-scaler)the ffmpeg-scaler manual for the complete list of scaler options. width, w height, h Set the output video dimension expression. Default value is the input dimension. If the width or w value is 0, the input width is used for the output. If the height or h value is 0, the input height is used for the output. If one and only one of the values is -n with n >= 1, the scale filter will use a value that maintains the aspect ratio of the input image, calculated from the other specified dimension. After that it will, however, make sure that the calculated dimension is divisible by n and adjust the value if necessary. If both values are -n with n >= 1, the behavior will be identical to both values being set to 0 as previously detailed. See below for the list of accepted constants for use in the dimension expression. eval Specify when to evaluate width and height expression. It accepts the following values: ‘init’ Only evaluate expressions once during the filter initialization or when a command is processed. ‘frame’ Evaluate expressions for each incoming frame. Default value is ‘init’. interl Set the interlacing mode. It accepts the following values: ‘1’ Force interlaced aware scaling. ‘0’ Do not apply interlaced scaling. ‘\-1’ Select interlaced aware scaling depending on whether the source frames are flagged as interlaced or not. Default value is ‘0’. flags Set libswscale scaling flags. See (ffmpeg-scaler)the ffmpeg-scaler manual for the complete list of values. If not explicitly specified the filter applies the default flags. param0, param1 Set libswscale input parameters for scaling algorithms that need them. See (ffmpeg-scaler)the ffmpeg-scaler manual for the complete documentation. If not explicitly specified the filter applies empty parameters. intent Set the ICC rendering intent to use when transforming between different color spaces. It accepts the following values: ‘perceptual’ Use a perceptually guided tone and gamut mapping curve. The exact details of the mapping used may change at any time and should not be relied on as stable. This intent is recommended for final viewing of image/video content in typical viewing settings. ‘relative\_colorimetric’ Statically clip out-of-gamut colors using a colorimetric clipping curve which attempts to find the colorimetrically least dissimilar in-gamut color. This intent performs white point adaptation and black point adaptation. This is the default. This intent is recommended wherever faithful color reproduction is of the utmost importance, even at the cost of clipping. ‘absolute\_colorimetric’ Hard clip out-of-gamut colors with no attempt at white or black point reproduction. This intent will reproduce in-gamut colors 1:1 on the output display as they would appear on the reference display, assuming the output display is appropriately calibrated. ‘saturation’ Performs saturation mapping - that is, stretches the input color volume directly onto the output color volume, in non-linear fashion that preserves the original signal appearance as much as possible. This intent is recommended for signal content evaluation, as it will not lead to any clipping. It is roughly analogous to not performing any color mapping, although it still takes into account the mastering display primaries and any differences in encoding TRC. size, s Set the video size. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. in\_color\_matrix out\_color\_matrix Set in/output YCbCr color space type. This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder. If not specified, the color space type depends on the pixel format. Possible values: ‘auto’ Choose automatically. ‘bt709’ Format conforming to International Telecommunication Union (ITU) Recommendation BT.709. ‘fcc’ Set color space conforming to the United States Federal Communications Commission (FCC) Code of Federal Regulations (CFR) Title 47 (2003) 73.682 (a). ‘bt601’ ‘bt470’ ‘smpte170m’ Set color space conforming to: * ITU Radiocommunication Sector (ITU-R) Recommendation BT.601 * ITU-R Rec. BT.470-6 (1998) Systems B, B1, and G * Society of Motion Picture and Television Engineers (SMPTE) ST 170:2004 ‘smpte240m’ Set color space conforming to SMPTE ST 240:1999. ‘bt2020’ Set color space conforming to ITU-R BT.2020 non-constant luminance system. in\_range out\_range Set in/output YCbCr sample range. This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder. If not specified, the range depends on the pixel format. Possible values: ‘auto/unknown’ Choose automatically. ‘jpeg/full/pc’ Set full range (0-255 in case of 8-bit luma). ‘mpeg/limited/tv’ Set "MPEG" range (16-235 in case of 8-bit luma). in\_chroma\_loc out\_chroma\_loc Set in/output chroma sample location. If not specified, center-sited chroma is used by default. Possible values: ‘auto, unknown’ ‘left’ ‘center’ ‘topleft’ ‘top’ ‘bottomleft’ ‘bottom’ in\_primaries out\_primaries Set in/output RGB primaries. This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder. Possible values: ‘auto’ Choose automatically. This is the default. ‘bt709’ ‘bt470m’ ‘bt470bg’ ‘smpte170m’ ‘smpte240m’ ‘film’ ‘bt2020’ ‘smpte428’ ‘smpte431’ ‘smpte432’ ‘jedec-p22’ ‘ebu3213’ in\_transfer out\_transfer Set in/output transfer response curve (TRC). This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder. Possible values: ‘auto’ Choose automatically. This is the default. ‘bt709’ ‘bt470m’ ‘gamma22’ ‘bt470bg’ ‘gamma28’ ‘smpte170m’ ‘smpte240m’ ‘linear’ ‘iec61966-2-1’ ‘srgb’ ‘iec61966-2-4’ ‘xvycc’ ‘bt1361e’ ‘bt2020-10’ ‘bt2020-12’ ‘smpte2084’ ‘smpte428’ ‘arib-std-b67’ force\_original\_aspect\_ratio Enable decreasing or increasing output video width or height if necessary to keep the original aspect ratio. Possible values: ‘disable’ Scale the video as specified and disable this feature. ‘decrease’ The output video dimensions will automatically be decreased if needed. ‘increase’ The output video dimensions will automatically be increased if needed. One useful instance of this option is that when you know a specific device’s maximum allowed resolution, you can use this to limit the output video to that, while retaining the aspect ratio. For example, device A allows 1280x720 playback, and your video is 1920x800. Using this option (set it to decrease) and specifying 1280x720 to the command line makes the output 1280x533. Please note that this is a different thing than specifying -1 for w or h, you still need to specify the output resolution for this option to work. force\_divisible\_by Ensures that both the output dimensions, width and height, are divisible by the given integer when used together with force\_original\_aspect\_ratio. This works similar to using `-n` in the w and h options. This option respects the value set for force\_original\_aspect\_ratio, increasing or decreasing the resolution accordingly. The video’s aspect ratio may be slightly modified. This option can be handy if you need to have a video fit within or exceed a defined resolution using force\_original\_aspect\_ratio but also have encoder restrictions on width or height divisibility. reset\_sar Enabling this option leads to the output SAR being reset to 1. Additionally, if the user requests proportional scaling either through the width or height expressions, e.g. `w=-4:h=360` or `w=iw/2:h=-1` or by enabling `force_original_aspect_ratio`, then the input DAR is taken into account and the output is scaled to produce square pixels. Default is false. The values of the w and h options are expressions containing the following constants: in\_w in\_h The input width and height iw ih These are the same as in\_w and in\_h. out\_w out\_h The output (scaled) width and height ow oh These are the same as out\_w and out\_h a The same as iw / ih sar input sample aspect ratio dar The input display aspect ratio. Calculated from `(iw / ih) * sar`. hsub vsub horizontal and vertical input chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. ohsub ovsub horizontal and vertical output chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. n The (sequential) number of the input frame, starting from 0. Only available with `eval=frame`. t The presentation timestamp of the input frame, expressed as a number of seconds. Only available with `eval=frame`. pos The position (byte offset) of the frame in the input stream, or NaN if this information is unavailable and/or meaningless (for example in case of synthetic video). Only available with `eval=frame`. Deprecated, do not use. ref\_w, rw ref\_h, rh ref\_a ref\_dar, rdar ref\_n ref\_t ref\_pos Eqvuialent to the above, but for a second reference input. If any of these variables are present, this filter accepts two inputs. #### 39.213.2 Examples * Scale the input video to a size of 200x100 scale=w=200:h=100 This is equivalent to: scale=200:100 or: scale=200x100 * Specify a size abbreviation for the output size: scale=qcif which can also be written as: scale=size=qcif * Scale the input to 2x: scale=w=2\*iw:h=2\*ih * The above is the same as: scale=2\*in\_w:2\*in\_h * Scale the input to 2x with forced interlaced scaling: scale=2\*iw:2\*ih:interl=1 * Scale the input to half size: scale=w=iw/2:h=ih/2 * Increase the width, and set the height to the same size: scale=3/2\*iw:ow * Seek Greek harmony: scale=iw:1/PHI\*iw scale=ih\*PHI:ih * Increase the height, and set the width to 3/2 of the height: scale=w=3/2\*oh:h=3/5\*ih * Increase the size, making the size a multiple of the chroma subsample values: scale="trunc(3/2\*iw/hsub)\*hsub:trunc(3/2\*ih/vsub)\*vsub" * Increase the width to a maximum of 500 pixels, keeping the same aspect ratio as the input: scale=w='min(500\\, iw\*3/2):h=-1' * Make pixels square by combining scale and setsar: scale='trunc(ih\*dar):ih',setsar=1/1 * Make pixels square using reset\_sar, making sure the resulting resolution is even (required by some codecs): scale='-2:ih-mod(ih,2):reset\_sar=1' * Scale to target exactly, however reset SAR to 1: scale='400:300:reset\_sar=1' * Scale to even dimensions that fit within 400x300, preserving input SAR: scale='400:300:force\_original\_aspect\_ratio=decrease:force\_divisible\_by=2' * Scale to produce square pixels with even dimensions that fit within 400x300: scale='400:300:force\_original\_aspect\_ratio=decrease:force\_divisible\_by=2:reset\_sar=1' * Scale a subtitle stream (sub) to match the main video (main) in size before overlaying. ("scale2ref") '\[main\]split\[a\]\[b\]; \[ref\]\[a\]scale=rw:rh\[c\]; \[b\]\[c\]overlay' * Scale a logo to 1/10th the height of a video, while preserving its display aspect ratio. \[logo-in\]\[video-in\]scale=w=oh\*dar:h=rh/10\[logo-out\] #### 39.213.3 Commands This filter supports the following commands: width, w height, h Set the output video dimension expression. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ### 39.214 scale\_vt Scale and convert the color parameters using VTPixelTransferSession. The filter accepts the following options: w h Set the output video dimension expression. Default value is the input dimension. color\_matrix Set the output colorspace matrix. color\_primaries Set the output color primaries. color\_transfer Set the output transfer characteristics. ### 39.215 scharr Apply scharr operator to input video stream. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. scale Set value which will be multiplied with filtered result. delta Set value which will be added to filtered result. #### 39.215.1 Commands This filter supports the all above options as commands. ### 39.216 scroll Scroll input video horizontally and/or vertically by constant speed. The filter accepts the following options: horizontal, h Set the horizontal scrolling speed. Default is 0. Allowed range is from -1 to 1. Negative values changes scrolling direction. vertical, v Set the vertical scrolling speed. Default is 0. Allowed range is from -1 to 1. Negative values changes scrolling direction. hpos Set the initial horizontal scrolling position. Default is 0. Allowed range is from 0 to 1. vpos Set the initial vertical scrolling position. Default is 0. Allowed range is from 0 to 1. #### 39.216.1 Commands This filter supports the following commands: horizontal, h Set the horizontal scrolling speed. vertical, v Set the vertical scrolling speed. ### 39.217 scdet Detect video scene change. This filter sets frame metadata with mafd between frame, the scene score, and forward the frame to the next filter, so they can use these metadata to detect scene change or others. In addition, this filter logs a message and sets frame metadata when it detects a scene change by threshold. `lavfi.scd.mafd` metadata keys are set with mafd for every frame. `lavfi.scd.score` metadata keys are set with scene change score for every frame to detect scene change. `lavfi.scd.time` metadata keys are set with current filtered frame time which detect scene change with threshold. The filter accepts the following options: threshold, t Set the scene change detection threshold as a percentage of maximum change. Good values are in the `[8.0, 14.0]` range. The range for threshold is `[0., 100.]`. Default value is `10.`. sc\_pass, s Set the flag to pass scene change frames to the next filter. Default value is `0` You can enable it if you want to get snapshot of scene change frames only. ### 39.218 selectivecolor Adjust cyan, magenta, yellow and black (CMYK) to certain ranges of colors (such as "reds", "yellows", "greens", "cyans", ...). The adjustment range is defined by the "purity" of the color (that is, how saturated it already is). This filter is similar to the Adobe Photoshop Selective Color tool. The filter accepts the following options: correction\_method Select color correction method. Available values are: ‘absolute’ Specified adjustments are applied "as-is" (added/subtracted to original pixel component value). ‘relative’ Specified adjustments are relative to the original component value. Default is `absolute`. reds Adjustments for red pixels (pixels where the red component is the maximum) yellows Adjustments for yellow pixels (pixels where the blue component is the minimum) greens Adjustments for green pixels (pixels where the green component is the maximum) cyans Adjustments for cyan pixels (pixels where the red component is the minimum) blues Adjustments for blue pixels (pixels where the blue component is the maximum) magentas Adjustments for magenta pixels (pixels where the green component is the minimum) whites Adjustments for white pixels (pixels where all components are greater than 128) neutrals Adjustments for all pixels except pure black and pure white blacks Adjustments for black pixels (pixels where all components are lesser than 128) psfile Specify a Photoshop selective color file (`.asv`) to import the settings from. All the adjustment settings (reds, yellows, ...) accept up to 4 space separated floating point adjustment values in the \[-1,1\] range, respectively to adjust the amount of cyan, magenta, yellow and black for the pixels of its range. #### 39.218.1 Examples * Increase cyan by 50% and reduce yellow by 33% in every green areas, and increase magenta by 27% in blue areas: selectivecolor=greens=.5 0 -.33 0:blues=0 .27 * Use a Photoshop selective color preset: selectivecolor=psfile=MySelectiveColorPresets/Misty.asv ### 39.219 separatefields The `separatefields` takes a frame-based video input and splits each frame into its components fields, producing a new half height clip with twice the frame rate and twice the frame count. This filter use field-dominance information in frame to decide which of each pair of fields to place first in the output. If it gets it wrong use setfield filter before `separatefields` filter. ### 39.220 setdar, setsar The `setdar` filter sets the Display Aspect Ratio for the filter output video. This is done by changing the specified Sample (aka Pixel) Aspect Ratio, according to the following equation: DAR = HORIZONTAL\_RESOLUTION / VERTICAL\_RESOLUTION \* SAR Keep in mind that the `setdar` filter does not modify the pixel dimensions of the video frame. Also, the display aspect ratio set by this filter may be changed by later filters in the filterchain, e.g. in case of scaling or if another "setdar" or a "setsar" filter is applied. The `setsar` filter sets the Sample (aka Pixel) Aspect Ratio for the filter output video. Note that as a consequence of the application of this filter, the output display aspect ratio will change according to the equation above. Keep in mind that the sample aspect ratio set by the `setsar` filter may be changed by later filters in the filterchain, e.g. if another "setsar" or a "setdar" filter is applied. It accepts the following parameters: r, ratio, dar (`setdar` only), sar (`setsar` only) Set the aspect ratio used by the filter. The parameter can be a floating point number string, or an expression. If the parameter is not specified, the value "0" is assumed, meaning that the same input value is used. max Set the maximum integer value to use for expressing numerator and denominator when reducing the expressed aspect ratio to a rational. Default value is `100`. The parameter sar is an expression containing the following constants: w, h The input width and height. a Same as w / h. sar The input sample aspect ratio. dar The input display aspect ratio. It is the same as (w / h) \* sar. hsub, vsub Horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p" hsub is 2 and vsub is 1. #### 39.220.1 Examples * To change the display aspect ratio to 16:9, specify one of the following: setdar=dar=1.77777 setdar=dar=16/9 * To change the sample aspect ratio to 10:11, specify: setsar=sar=10/11 * To set a display aspect ratio of 16:9, and specify a maximum integer value of 1000 in the aspect ratio reduction, use the command: setdar=ratio=16/9:max=1000 ### 39.221 setfield Force field for the output video frame. The `setfield` filter marks the interlace type field for the output frames. It does not change the input frame, but only sets the corresponding property, which affects how the frame is treated by following filters (e.g. `fieldorder` or `yadif`). The filter accepts the following options: mode Available values are: ‘auto’ Keep the same field property. ‘bff’ Mark the frame as bottom-field-first. ‘tff’ Mark the frame as top-field-first. ‘prog’ Mark the frame as progressive. ### 39.222 setparams Force frame parameter for the output video frame. The `setparams` filter marks interlace and color range for the output frames. It does not change the input frame, but only sets the corresponding property, which affects how the frame is treated by filters/encoders. field\_mode Available values are: ‘auto’ Keep the same field property (default). ‘bff’ Mark the frame as bottom-field-first. ‘tff’ Mark the frame as top-field-first. ‘prog’ Mark the frame as progressive. range Available values are: ‘auto’ Keep the same color range property (default). ‘unspecified, unknown’ Mark the frame as unspecified color range. ‘limited, tv, mpeg’ Mark the frame as limited range. ‘full, pc, jpeg’ Mark the frame as full range. color\_primaries Set the color primaries. Available values are: ‘auto’ Keep the same color primaries property (default). ‘bt709’ ‘unknown’ ‘bt470m’ ‘bt470bg’ ‘smpte170m’ ‘smpte240m’ ‘film’ ‘bt2020’ ‘smpte428’ ‘smpte431’ ‘smpte432’ ‘jedec-p22’ color\_trc Set the color transfer. Available values are: ‘auto’ Keep the same color trc property (default). ‘bt709’ ‘unknown’ ‘bt470m’ ‘bt470bg’ ‘smpte170m’ ‘smpte240m’ ‘linear’ ‘log100’ ‘log316’ ‘iec61966-2-4’ ‘bt1361e’ ‘iec61966-2-1’ ‘bt2020-10’ ‘bt2020-12’ ‘smpte2084’ ‘smpte428’ ‘arib-std-b67’ colorspace Set the colorspace. Available values are: ‘auto’ Keep the same colorspace property (default). ‘gbr’ ‘bt709’ ‘unknown’ ‘fcc’ ‘bt470bg’ ‘smpte170m’ ‘smpte240m’ ‘ycgco’ ‘bt2020nc’ ‘bt2020c’ ‘smpte2085’ ‘chroma-derived-nc’ ‘chroma-derived-c’ ‘ictcp’ chroma\_location Set the chroma sample location. Available values are: ‘auto’ Keep the same chroma location (default). ‘unspecified, unknown’ ‘left’ ‘center’ ‘topleft’ ‘top’ ‘bottomleft’ ‘bottom’ ### 39.223 shear Apply shear transform to input video. This filter supports the following options: shx Shear factor in X-direction. Default value is 0. Allowed range is from -2 to 2. shy Shear factor in Y-direction. Default value is 0. Allowed range is from -2 to 2. fillcolor, c Set the color used to fill the output area not covered by the transformed video. For the general syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. If the special value "none" is selected then no background is printed (useful for example if the background is never shown). Default value is "black". interp Set interpolation type. Can be `bilinear` or `nearest`. Default is `bilinear`. #### 39.223.1 Commands This filter supports the all above options as commands. ### 39.224 showinfo Show a line containing various information for each input video frame. The input video is not modified. This filter supports the following options: checksum Calculate checksums of each plane. By default enabled. udu\_sei\_as\_ascii Try to print user data unregistered SEI as ascii character when possible, in hex format otherwise. The shown line contains a sequence of key/value pairs of the form key:value. The following values are shown in the output: n The (sequential) number of the input frame, starting from 0. pts The Presentation TimeStamp of the input frame, expressed as a number of time base units. The time base unit depends on the filter input pad. pts\_time The Presentation TimeStamp of the input frame, expressed as a number of seconds. fmt The pixel format name. sar The sample aspect ratio of the input frame, expressed in the form num/den. s The size of the input frame. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. i The type of interlaced mode ("P" for "progressive", "T" for top field first, "B" for bottom field first). iskey This is 1 if the frame is a key frame, 0 otherwise. type The picture type of the input frame ("I" for an I-frame, "P" for a P-frame, "B" for a B-frame, or "?" for an unknown type). Also refer to the documentation of the `AVPictureType` enum and of the `av_get_picture_type_char` function defined in libavutil/avutil.h. checksum The Adler-32 checksum (printed in hexadecimal) of all the planes of the input frame. plane\_checksum The Adler-32 checksum (printed in hexadecimal) of each plane of the input frame, expressed in the form "\[c0 c1 c2 c3\]". mean The mean value of pixels in each plane of the input frame, expressed in the form "\[mean0 mean1 mean2 mean3\]". stdev The standard deviation of pixel values in each plane of the input frame, expressed in the form "\[stdev0 stdev1 stdev2 stdev3\]". ### 39.225 showpalette Displays the 256 colors palette of each frame. This filter is only relevant for pal8 pixel format frames. It accepts the following option: s Set the size of the box used to represent one palette color entry. Default is `30` (for a `30x30` pixel box). ### 39.226 shuffleframes Reorder and/or duplicate and/or drop video frames. It accepts the following parameters: mapping Set the destination indexes of input frames. This is space or ’|’ separated list of indexes that maps input frames to output frames. Number of indexes also sets maximal value that each index may have. ’-1’ index have special meaning and that is to drop frame. The first frame has the index 0. The default is to keep the input unchanged. #### 39.226.1 Examples * Swap second and third frame of every three frames of the input: ffmpeg -i INPUT -vf "shuffleframes=0 2 1" OUTPUT * Swap 10th and 1st frame of every ten frames of the input: ffmpeg -i INPUT -vf "shuffleframes=9 1 2 3 4 5 6 7 8 0" OUTPUT ### 39.227 shufflepixels Reorder pixels in video frames. This filter accepts the following options: direction, d Set shuffle direction. Can be forward or inverse direction. Default direction is forward. mode, m Set shuffle mode. Can be horizontal, vertical or block mode. width, w height, h Set shuffle block\_size. In case of horizontal shuffle mode only width part of size is used, and in case of vertical shuffle mode only height part of size is used. seed, s Set random seed used with shuffling pixels. Mainly useful to set to be able to reverse filtering process to get original input. For example, to reverse forward shuffle you need to use same parameters and exact same seed and to set direction to inverse. ### 39.228 shuffleplanes Reorder and/or duplicate video planes. It accepts the following parameters: map0 The index of the input plane to be used as the first output plane. map1 The index of the input plane to be used as the second output plane. map2 The index of the input plane to be used as the third output plane. map3 The index of the input plane to be used as the fourth output plane. The first plane has the index 0. The default is to keep the input unchanged. #### 39.228.1 Examples * Swap the second and third planes of the input: ffmpeg -i INPUT -vf shuffleplanes=0:2:1:3 OUTPUT ### 39.229 signalstats Evaluate various visual metrics that assist in determining issues associated with the digitization of analog video media. By default the filter will log these metadata values: YMIN Display the minimal Y value contained within the input frame. Expressed in range of \[0-255\]. YLOW Display the Y value at the 10% percentile within the input frame. Expressed in range of \[0-255\]. YAVG Display the average Y value within the input frame. Expressed in range of \[0-255\]. YHIGH Display the Y value at the 90% percentile within the input frame. Expressed in range of \[0-255\]. YMAX Display the maximum Y value contained within the input frame. Expressed in range of \[0-255\]. UMIN Display the minimal U value contained within the input frame. Expressed in range of \[0-255\]. ULOW Display the U value at the 10% percentile within the input frame. Expressed in range of \[0-255\]. UAVG Display the average U value within the input frame. Expressed in range of \[0-255\]. UHIGH Display the U value at the 90% percentile within the input frame. Expressed in range of \[0-255\]. UMAX Display the maximum U value contained within the input frame. Expressed in range of \[0-255\]. VMIN Display the minimal V value contained within the input frame. Expressed in range of \[0-255\]. VLOW Display the V value at the 10% percentile within the input frame. Expressed in range of \[0-255\]. VAVG Display the average V value within the input frame. Expressed in range of \[0-255\]. VHIGH Display the V value at the 90% percentile within the input frame. Expressed in range of \[0-255\]. VMAX Display the maximum V value contained within the input frame. Expressed in range of \[0-255\]. SATMIN Display the minimal saturation value contained within the input frame. Expressed in range of \[0-~181.02\]. SATLOW Display the saturation value at the 10% percentile within the input frame. Expressed in range of \[0-~181.02\]. SATAVG Display the average saturation value within the input frame. Expressed in range of \[0-~181.02\]. SATHIGH Display the saturation value at the 90% percentile within the input frame. Expressed in range of \[0-~181.02\]. SATMAX Display the maximum saturation value contained within the input frame. Expressed in range of \[0-~181.02\]. HUEMED Display the median value for hue within the input frame. Expressed in range of \[0-360\]. HUEAVG Display the average value for hue within the input frame. Expressed in range of \[0-360\]. YDIF Display the average of sample value difference between all values of the Y plane in the current frame and corresponding values of the previous input frame. Expressed in range of \[0-255\]. UDIF Display the average of sample value difference between all values of the U plane in the current frame and corresponding values of the previous input frame. Expressed in range of \[0-255\]. VDIF Display the average of sample value difference between all values of the V plane in the current frame and corresponding values of the previous input frame. Expressed in range of \[0-255\]. YBITDEPTH Display bit depth of Y plane in current frame. Expressed in range of \[0-16\]. UBITDEPTH Display bit depth of U plane in current frame. Expressed in range of \[0-16\]. VBITDEPTH Display bit depth of V plane in current frame. Expressed in range of \[0-16\]. The filter accepts the following options: stat out stat specify an additional form of image analysis. out output video with the specified type of pixel highlighted. Both options accept the following values: ‘tout’ Identify temporal outliers pixels. A temporal outlier is a pixel unlike the neighboring pixels of the same field. Examples of temporal outliers include the results of video dropouts, head clogs, or tape tracking issues. ‘vrep’ Identify vertical line repetition. Vertical line repetition includes similar rows of pixels within a frame. In born-digital video vertical line repetition is common, but this pattern is uncommon in video digitized from an analog source. When it occurs in video that results from the digitization of an analog source it can indicate concealment from a dropout compensator. ‘brng’ Identify pixels that fall outside of legal broadcast range. color, c Set the highlight color for the out option. The default color is yellow. #### 39.229.1 Examples * Output data of various video metrics: ffprobe -f lavfi movie=example.mov,signalstats="stat=tout+vrep+brng" -show\_frames * Output specific data about the minimum and maximum values of the Y plane per frame: ffprobe -f lavfi movie=example.mov,signalstats -show\_entries frame\_tags=lavfi.signalstats.YMAX,lavfi.signalstats.YMIN * Playback video while highlighting pixels that are outside of broadcast range in red. ffplay example.mov -vf signalstats="out=brng:color=red" * Playback video with signalstats metadata drawn over the frame. ffplay example.mov -vf signalstats=stat=brng+vrep+tout,drawtext=fontfile=FreeSerif.ttf:textfile=signalstat\_drawtext.txt The contents of signalstat\_drawtext.txt used in the command are: time %{pts:hms} Y (%{metadata:lavfi.signalstats.YMIN}-%{metadata:lavfi.signalstats.YMAX}) U (%{metadata:lavfi.signalstats.UMIN}-%{metadata:lavfi.signalstats.UMAX}) V (%{metadata:lavfi.signalstats.VMIN}-%{metadata:lavfi.signalstats.VMAX}) saturation maximum: %{metadata:lavfi.signalstats.SATMAX} ### 39.230 signature Calculates the MPEG-7 Video Signature. The filter can handle more than one input. In this case the matching between the inputs can be calculated additionally. The filter always passes through the first input. The signature of each stream can be written into a file. It accepts the following options: detectmode Enable or disable the matching process. Available values are: ‘off’ Disable the calculation of a matching (default). ‘full’ Calculate the matching for the whole video and output whether the whole video matches or only parts. ‘fast’ Calculate only until a matching is found or the video ends. Should be faster in some cases. nb\_inputs Set the number of inputs. The option value must be a non negative integer. Default value is 1. filename Set the path to which the output is written. If there is more than one input, the path must be a prototype, i.e. must contain %d or %0nd (where n is a positive integer), that will be replaced with the input number. If no filename is specified, no output will be written. This is the default. format Choose the output format. Available values are: ‘binary’ Use the specified binary representation (default). ‘xml’ Use the specified xml representation. th\_d Set threshold to detect one word as similar. The option value must be an integer greater than zero. The default value is 9000. th\_dc Set threshold to detect all words as similar. The option value must be an integer greater than zero. The default value is 60000. th\_xh Set threshold to detect frames as similar. The option value must be an integer greater than zero. The default value is 116. th\_di Set the minimum length of a sequence in frames to recognize it as matching sequence. The option value must be a non negative integer value. The default value is 0. th\_it Set the minimum relation, that matching frames to all frames must have. The option value must be a double value between 0 and 1. The default value is 0.5. #### 39.230.1 Examples * To calculate the signature of an input video and store it in signature.bin: ffmpeg -i input.mkv -vf signature=filename=signature.bin -map 0:v -f null - * To detect whether two videos match and store the signatures in XML format in signature0.xml and signature1.xml: ffmpeg -i input1.mkv -i input2.mkv -filter\_complex "\[0:v\]\[1:v\] signature=nb\_inputs=2:detectmode=full:format=xml:filename=signature%d.xml" -map :v -f null - ### 39.231 siti Calculate Spatial Information (SI) and Temporal Information (TI) scores for a video, as defined in ITU-T Rec. P.910 (11/21): Subjective video quality assessment methods for multimedia applications. Available PDF at https://www.itu.int/rec/T-REC-P.910-202111-S/en. Note that this is a legacy implementation that corresponds to a superseded recommendation. Refer to ITU-T Rec. P.910 (07/22) for the latest version: https://www.itu.int/rec/T-REC-P.910-202207-I/en It accepts the following option: print\_summary If set to 1, Summary statistics will be printed to the console. Default 0. #### 39.231.1 Examples * To calculate SI/TI metrics and print summary: ffmpeg -i input.mp4 -vf siti=print\_summary=1 -f null - ### 39.232 smartblur Blur the input video without impacting the outlines. It accepts the following options: luma\_radius, lr Set the luma radius. The option value must be a float number in the range \[0.1,5.0\] that specifies the variance of the gaussian filter used to blur the image (slower if larger). Default value is 1.0. luma\_strength, ls Set the luma strength. The option value must be a float number in the range \[-1.0,1.0\] that configures the blurring. A value included in \[0.0,1.0\] will blur the image whereas a value included in \[-1.0,0.0\] will sharpen the image. Default value is 1.0. luma\_threshold, lt Set the luma threshold used as a coefficient to determine whether a pixel should be blurred or not. The option value must be an integer in the range \[-30,30\]. A value of 0 will filter all the image, a value included in \[0,30\] will filter flat areas and a value included in \[-30,0\] will filter edges. Default value is 0. chroma\_radius, cr Set the chroma radius. The option value must be a float number in the range \[0.1,5.0\] that specifies the variance of the gaussian filter used to blur the image (slower if larger). Default value is luma\_radius. chroma\_strength, cs Set the chroma strength. The option value must be a float number in the range \[-1.0,1.0\] that configures the blurring. A value included in \[0.0,1.0\] will blur the image whereas a value included in \[-1.0,0.0\] will sharpen the image. Default value is luma\_strength. chroma\_threshold, ct Set the chroma threshold used as a coefficient to determine whether a pixel should be blurred or not. The option value must be an integer in the range \[-30,30\]. A value of 0 will filter all the image, a value included in \[0,30\] will filter flat areas and a value included in \[-30,0\] will filter edges. Default value is luma\_threshold. alpha\_radius, ar Set the alpha radius. The option value must be a float number in the range \[0.1,5.0\] that specifies the variance of the gaussian filter used to blur the image (slower if larger). Default value is luma\_radius. alpha\_strength, as Set the alpha strength. The option value must be a float number in the range \[-1.0,1.0\] that configures the blurring. A value included in \[0.0,1.0\] will blur the image whereas a value included in \[-1.0,0.0\] will sharpen the image. Default value is luma\_strength. alpha\_threshold, at Set the alpha threshold used as a coefficient to determine whether a pixel should be blurred or not. The option value must be an integer in the range \[-30,30\]. A value of 0 will filter all the image, a value included in \[0,30\] will filter flat areas and a value included in \[-30,0\] will filter edges. Default value is luma\_threshold. If a chroma or alpha option is not explicitly set, the corresponding luma value is set. ### 39.233 sobel Apply sobel operator to input video stream. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. scale Set value which will be multiplied with filtered result. delta Set value which will be added to filtered result. #### 39.233.1 Commands This filter supports the all above options as commands. ### 39.234 spp Apply a simple postprocessing filter that compresses and decompresses the image at several (or - in the case of quality level `6` - all) shifts and average the results. The filter accepts the following options: quality Set quality. This option defines the number of levels for averaging. It accepts an integer in the range 0-6. If set to `0`, the filter will have no effect. A value of `6` means the higher quality. For each increment of that value the speed drops by a factor of approximately 2. Default value is `3`. qp Force a constant quantization parameter. If not set, the filter will use the QP from the video stream (if available). mode Set thresholding mode. Available modes are: ‘hard’ Set hard thresholding (default). ‘soft’ Set soft thresholding (better de-ringing effect, but likely blurrier). use\_bframe\_qp Enable the use of the QP from the B-Frames if set to `1`. Using this option may cause flicker since the B-Frames have often larger QP. Default is `0` (not enabled). #### 39.234.1 Commands This filter supports the following commands: quality, level Set quality level. The value `max` can be used to set the maximum level, currently `6`. ### 39.235 sr Scale the input by applying one of the super-resolution methods based on convolutional neural networks. Supported models: * Super-Resolution Convolutional Neural Network model (SRCNN). See https://arxiv.org/abs/1501.00092. * Efficient Sub-Pixel Convolutional Neural Network model (ESPCN). See https://arxiv.org/abs/1609.05158. Training scripts as well as scripts for model file (.pb) saving can be found at https://github.com/XueweiMeng/sr/tree/sr\_dnn\_native. Original repository is at https://github.com/HighVoltageRocknRoll/sr.git. The filter accepts the following options: dnn\_backend Specify which DNN backend to use for model loading and execution. This option accepts the following values: ‘tensorflow’ TensorFlow backend. To enable this backend you need to install the TensorFlow for C library (see https://www.tensorflow.org/install/lang\_c) and configure FFmpeg with `--enable-libtensorflow` model Set path to model file specifying network architecture and its parameters. Note that different backends use different file formats. TensorFlow, OpenVINO backend can load files for only its format. scale\_factor Set scale factor for SRCNN model. Allowed values are `2`, `3` and `4`. Default value is `2`. Scale factor is necessary for SRCNN model, because it accepts input upscaled using bicubic upscaling with proper scale factor. To get full functionality (such as async execution), please use the dnn\_processing filter. ### 39.236 sr\_amf Upscale (size increasing) for the input video using AMD Advanced Media Framework library for hardware acceleration. Use advanced algorithms for upscaling with higher output quality. Setting the output width and height works in the same way as for the scale filter. The filter accepts the following options: w h Set the output video dimension expression. Default value is the input dimension. Allows for the same expressions as the scale filter. algorithm Sets the algorithm used for scaling: bilinear Bilinear bicubic Bicubic sr1-0 Video SR1.0 This is a default value point Point sr1-1 Video SR1.1 sharpness Control hq scaler sharpening. The value is a float in the range of \[0.0, 2.0\] format Controls the output pixel format. By default, or if none is specified, the input pixel format is used. keep-ratio Force the scaler to keep the aspect ratio of the input image when the output size has a different aspect ratio. Default value is false. fill Specifies whether the output image outside the region of interest, which does not fill the entire output surface should be filled with a solid color. #### 39.236.1 Examples * Scale input to 720p, keeping aspect ratio and ensuring the output is yuv420p. sr\_amf=-2:720:format=yuv420p * Upscale to 4K with algorithm video SR1.1. sr\_amf=4096:2160:algorithm=sr1-1 ### 39.237 ssim Obtain the SSIM (Structural SImilarity Metric) between two input videos. This filter takes in input two input videos, the first input is considered the "main" source and is passed unchanged to the output. The second input is used as a "reference" video for computing the SSIM. Both video inputs must have the same resolution and pixel format for this filter to work correctly. Also it assumes that both inputs have the same number of frames, which are compared one by one. The filter stores the calculated SSIM of each frame. The description of the accepted parameters follows. stats\_file, f If specified the filter will use the named file to save the SSIM of each individual frame. When filename equals "-" the data is sent to standard output. The file printed if stats\_file is selected, contains a sequence of key/value pairs of the form key:value for each compared couple of frames. A description of each shown parameter follows: n sequential number of the input frame, starting from 1 Y, U, V, R, G, B SSIM of the compared frames for the component specified by the suffix. All SSIM of the compared frames for the whole frame. dB Same as above but in dB representation. This filter also supports the framesync options. #### 39.237.1 Examples * For example: movie=ref\_movie.mpg, setpts=PTS-STARTPTS \[main\]; \[main\]\[ref\] ssim="stats\_file=stats.log" \[out\] On this example the input file being processed is compared with the reference file ref\_movie.mpg. The SSIM of each individual frame is stored in stats.log. * Another example with both psnr and ssim at same time: ffmpeg -i main.mpg -i ref.mpg -lavfi "ssim;\[0:v\]\[1:v\]psnr" -f null - * Another example with different containers: ffmpeg -i main.mpg -i ref.mkv -lavfi "\[0:v\]settb=AVTB,setpts=PTS-STARTPTS\[main\];\[1:v\]settb=AVTB,setpts=PTS-STARTPTS\[ref\];\[main\]\[ref\]ssim" -f null - ### 39.238 stereo3d Convert between different stereoscopic image formats. The filters accept the following options: in Set stereoscopic image format of input. Available values for input image formats are: ‘sbsl’ side by side parallel (left eye left, right eye right) ‘sbsr’ side by side crosseye (right eye left, left eye right) ‘sbs2l’ side by side parallel with half width resolution (left eye left, right eye right) ‘sbs2r’ side by side crosseye with half width resolution (right eye left, left eye right) ‘abl’ ‘tbl’ above-below (left eye above, right eye below) ‘abr’ ‘tbr’ above-below (right eye above, left eye below) ‘ab2l’ ‘tb2l’ above-below with half height resolution (left eye above, right eye below) ‘ab2r’ ‘tb2r’ above-below with half height resolution (right eye above, left eye below) ‘al’ alternating frames (left eye first, right eye second) ‘ar’ alternating frames (right eye first, left eye second) ‘irl’ interleaved rows (left eye has top row, right eye starts on next row) ‘irr’ interleaved rows (right eye has top row, left eye starts on next row) ‘icl’ interleaved columns, left eye first ‘icr’ interleaved columns, right eye first Default value is ‘sbsl’. out Set stereoscopic image format of output. ‘sbsl’ side by side parallel (left eye left, right eye right) ‘sbsr’ side by side crosseye (right eye left, left eye right) ‘sbs2l’ side by side parallel with half width resolution (left eye left, right eye right) ‘sbs2r’ side by side crosseye with half width resolution (right eye left, left eye right) ‘abl’ ‘tbl’ above-below (left eye above, right eye below) ‘abr’ ‘tbr’ above-below (right eye above, left eye below) ‘ab2l’ ‘tb2l’ above-below with half height resolution (left eye above, right eye below) ‘ab2r’ ‘tb2r’ above-below with half height resolution (right eye above, left eye below) ‘al’ alternating frames (left eye first, right eye second) ‘ar’ alternating frames (right eye first, left eye second) ‘irl’ interleaved rows (left eye has top row, right eye starts on next row) ‘irr’ interleaved rows (right eye has top row, left eye starts on next row) ‘arbg’ anaglyph red/blue gray (red filter on left eye, blue filter on right eye) ‘argg’ anaglyph red/green gray (red filter on left eye, green filter on right eye) ‘arcg’ anaglyph red/cyan gray (red filter on left eye, cyan filter on right eye) ‘arch’ anaglyph red/cyan half colored (red filter on left eye, cyan filter on right eye) ‘arcc’ anaglyph red/cyan color (red filter on left eye, cyan filter on right eye) ‘arcd’ anaglyph red/cyan color optimized with the least squares projection of dubois (red filter on left eye, cyan filter on right eye) ‘agmg’ anaglyph green/magenta gray (green filter on left eye, magenta filter on right eye) ‘agmh’ anaglyph green/magenta half colored (green filter on left eye, magenta filter on right eye) ‘agmc’ anaglyph green/magenta colored (green filter on left eye, magenta filter on right eye) ‘agmd’ anaglyph green/magenta color optimized with the least squares projection of dubois (green filter on left eye, magenta filter on right eye) ‘aybg’ anaglyph yellow/blue gray (yellow filter on left eye, blue filter on right eye) ‘aybh’ anaglyph yellow/blue half colored (yellow filter on left eye, blue filter on right eye) ‘aybc’ anaglyph yellow/blue colored (yellow filter on left eye, blue filter on right eye) ‘aybd’ anaglyph yellow/blue color optimized with the least squares projection of dubois (yellow filter on left eye, blue filter on right eye) ‘ml’ mono output (left eye only) ‘mr’ mono output (right eye only) ‘chl’ checkerboard, left eye first ‘chr’ checkerboard, right eye first ‘icl’ interleaved columns, left eye first ‘icr’ interleaved columns, right eye first ‘hdmi’ HDMI frame pack Default value is ‘arcd’. #### 39.238.1 Examples * Convert input video from side by side parallel to anaglyph yellow/blue dubois: stereo3d=sbsl:aybd * Convert input video from above below (left eye above, right eye below) to side by side crosseye. stereo3d=abl:sbsr ### 39.239 streamselect, astreamselect Select video or audio streams. The filter accepts the following options: inputs Set number of inputs. Default is 2. map Set input indexes to remap to outputs. #### 39.239.1 Commands The `streamselect` and `astreamselect` filter supports the following commands: map Set input indexes to remap to outputs. #### 39.239.2 Examples * Select first 5 seconds 1st stream and rest of time 2nd stream: sendcmd='5.0 streamselect map 1',streamselect=inputs=2:map=0 * Same as above, but for audio: asendcmd='5.0 astreamselect map 1',astreamselect=inputs=2:map=0 ### 39.240 subtitles Draw subtitles on top of input video using the libass library. To enable compilation of this filter you need to configure FFmpeg with `--enable-libass`. This filter also requires a build with libavcodec and libavformat to convert the passed subtitles file to ASS (Advanced Substation Alpha) subtitles format. The filter accepts the following options: filename, f Set the filename of the subtitle file to read. It must be specified. original\_size Specify the size of the original video, the video for which the ASS file was composed. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Due to a misdesign in ASS aspect ratio arithmetic, this is necessary to correctly scale the fonts if the aspect ratio has been changed. fontsdir Set a directory path containing fonts that can be used by the filter. These fonts will be used in addition to whatever the font provider uses. alpha Process alpha channel, by default alpha channel is untouched. charenc Set subtitles input character encoding. `subtitles` filter only. Only useful if not UTF-8. stream\_index, si Set subtitles stream index. `subtitles` filter only. force\_style Override default style or script info parameters of the subtitles. It accepts a string containing ASS style format `KEY=VALUE` couples separated by ",". wrap\_unicode Break lines according to the Unicode Line Breaking Algorithm. Availability requires at least libass release 0.17.0 (or LIBASS\_VERSION 0x01600010), _and_ libass must have been built with libunibreak. The option is enabled by default except for native ASS. If the first key is not specified, it is assumed that the first value specifies the filename. For example, to render the file sub.srt on top of the input video, use the command: subtitles=sub.srt which is equivalent to: subtitles=filename=sub.srt To render the default subtitles stream from file video.mkv, use: subtitles=video.mkv To render the second subtitles stream from that file, use: subtitles=video.mkv:si=1 To make the subtitles stream from sub.srt appear in 80% transparent blue `DejaVu Serif`, use: subtitles=sub.srt:force\_style='Fontname=DejaVu Serif,PrimaryColour=&HCCFF0000' ### 39.241 super2xsai Scale the input by 2x and smooth using the Super2xSaI (Scale and Interpolate) pixel art scaling algorithm. Useful for enlarging pixel art images without reducing sharpness. ### 39.242 swaprect Swap two rectangular objects in video. This filter accepts the following options: w Set object width. h Set object height. x1 Set 1st rect x coordinate. y1 Set 1st rect y coordinate. x2 Set 2nd rect x coordinate. y2 Set 2nd rect y coordinate. All expressions are evaluated once for each frame. The all options are expressions containing the following constants: w h The input width and height. a same as w / h sar input sample aspect ratio dar input display aspect ratio, it is the same as (w / h) \* sar n The number of the input frame, starting from 0. t The timestamp expressed in seconds. It’s NAN if the input timestamp is unknown. pos the position in the file of the input frame, NAN if unknown; deprecated, do not use #### 39.242.1 Commands This filter supports the all above options as commands. ### 39.243 swapuv Swap U & V plane. ### 39.244 tblend Blend successive video frames. See blend ### 39.245 telecine Apply telecine process to the video. This filter accepts the following options: first\_field ‘top, t’ top field first ‘bottom, b’ bottom field first The default value is `top`. pattern A string of numbers representing the pulldown pattern you wish to apply. The default value is `23`. Some typical patterns: NTSC output (30i): 27.5p: 32222 24p: 23 (classic) 24p: 2332 (preferred) 20p: 33 18p: 334 16p: 3444 PAL output (25i): 27.5p: 12222 24p: 222222222223 ("Euro pulldown") 16.67p: 33 16p: 33333334 ### 39.246 thistogram Compute and draw a color distribution histogram for the input video across time. Unlike histogram video filter which only shows histogram of single input frame at certain time, this filter shows also past histograms of number of frames defined by `width` option. The computed histogram is a representation of the color component distribution in an image. The filter accepts the following options: width, w Set width of single color component output. Default value is `0`. Value of `0` means width will be picked from input video. This also set number of passed histograms to keep. Allowed range is \[0, 8192\]. display\_mode, d Set display mode. It accepts the following values: ‘stack’ Per color component graphs are placed below each other. ‘parade’ Per color component graphs are placed side by side. ‘overlay’ Presents information identical to that in the `parade`, except that the graphs representing color components are superimposed directly over one another. Default is `stack`. levels\_mode, m Set mode. Can be either `linear`, or `logarithmic`. Default is `linear`. components, c Set what color components to display. Default is `7`. bgopacity, b Set background opacity. Default is `0.9`. envelope, e Show envelope. Default is disabled. ecolor, ec Set envelope color. Default is `gold`. slide Set slide mode. Available values for slide is: ‘frame’ Draw new frame when right border is reached. ‘replace’ Replace old columns with new ones. ‘scroll’ Scroll from right to left. ‘rscroll’ Scroll from left to right. ‘picture’ Draw single picture. Default is `replace`. ### 39.247 threshold Apply threshold effect to video stream. This filter needs four video streams to perform thresholding. First stream is stream we are filtering. Second stream is holding threshold values, third stream is holding min values, and last, fourth stream is holding max values. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. For example if first stream pixel’s component value is less then threshold value of pixel component from 2nd threshold stream, third stream value will picked, otherwise fourth stream pixel component value will be picked. Using color source filter one can perform various types of thresholding: #### 39.247.1 Commands This filter supports the all options as commands. #### 39.247.2 Examples * Binary threshold, using gray color as threshold: ffmpeg -i 320x240.avi -f lavfi -i color=gray -f lavfi -i color=black -f lavfi -i color=white -lavfi threshold output.avi * Inverted binary threshold, using gray color as threshold: ffmpeg -i 320x240.avi -f lavfi -i color=gray -f lavfi -i color=white -f lavfi -i color=black -lavfi threshold output.avi * Truncate binary threshold, using gray color as threshold: ffmpeg -i 320x240.avi -f lavfi -i color=gray -i 320x240.avi -f lavfi -i color=gray -lavfi threshold output.avi * Threshold to zero, using gray color as threshold: ffmpeg -i 320x240.avi -f lavfi -i color=gray -f lavfi -i color=white -i 320x240.avi -lavfi threshold output.avi * Inverted threshold to zero, using gray color as threshold: ffmpeg -i 320x240.avi -f lavfi -i color=gray -i 320x240.avi -f lavfi -i color=white -lavfi threshold output.avi ### 39.248 thumbnail Select the most representative frame in a given sequence of consecutive frames. The filter accepts the following options: n Set the frames batch size to analyze; in a set of n frames, the filter will pick one of them, and then handle the next batch of n frames until the end. Default is `100`. log Set the log level to display picked frame stats. Default is `info`. Since the filter keeps track of the whole frames sequence, a bigger n value will result in a higher memory usage, so a high value is not recommended. #### 39.248.1 Examples * Extract one picture each 50 frames: thumbnail=50 * Complete example of a thumbnail creation with `ffmpeg`: ffmpeg -i in.avi -vf thumbnail,scale=300:200 -frames:v 1 out.png ### 39.249 tile Tile several successive frames together. The untile filter can do the reverse. The filter accepts the following options: layout Set the grid size in the form `COLUMNSxROWS`. Range is up to UINT\_MAX cells. Default is `6x5`. nb\_frames Set the maximum number of frames to render in the given area. It must be less than or equal to wxh. The default value is `0`, meaning all the area will be used. margin Set the outer border margin in pixels. Range is 0 to 1024. Default is `0`. padding Set the inner border thickness (i.e. the number of pixels between frames). For more advanced padding options (such as having different values for the edges), refer to the pad video filter. Range is 0 to 1024. Default is `0`. color Specify the color of the unused area. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of color is "black". overlap Set the number of frames to overlap when tiling several successive frames together. The value must be between `0` and nb\_frames - 1. Default is `0`. init\_padding Set the number of frames to initially be empty before displaying first output frame. This controls how soon will one get first output frame. The value must be between `0` and nb\_frames - 1. Default is `0`. #### 39.249.1 Examples * Produce 8x8 PNG tiles of all keyframes (\-skip\_frame nokey) in a movie: ffmpeg -skip\_frame nokey -i file.avi -vf 'scale=128:72,tile=8x8' -an -vsync 0 keyframes%03d.png The \-vsync 0 is necessary to prevent `ffmpeg` from duplicating each output frame to accommodate the originally detected frame rate. * Display `5` pictures in an area of `3x2` frames, with `7` pixels between them, and `2` pixels of initial margin, using mixed flat and named options: tile=3x2:nb\_frames=5:padding=7:margin=2 ### 39.250 tiltandshift Apply tilt-and-shift effect. What happens when you invert time and space? Normally a video is composed of several frames that represent a different instant of time and shows a scene that evolves in the space captured by the frame. This filter is the antipode of that concept, taking inspiration from tilt and shift photography. A filtered frame contains the whole timeline of events composing the sequence, and this is obtained by placing a slice of pixels from each frame into a single one. However, since there are no infinite-width frames, this is done up the width of the input frame, and a video is recomposed by shifting away one column for each subsequent frame. In order to map space to time, the filter tilts each input frame as well, so that motion is preserved. This is accomplished by progressively selecting a different column from each input frame. The end result is a sort of inverted parallax, so that far away objects move much faster that the ones in the front. The ideal conditions for this video effect are when there is either very little motion and the backgroud is static, or when there is a lot of motion and a very wide depth of field (e.g. wide panorama, while moving on a train). The filter accepts the following parameters: tilt Tilt video while shifting (default). When unset, video will be sliding a static image, composed of the first column of each frame. start What to do at the start of filtering (see below). end What to do at the end of filtering (see below). hold How many columns should pass through before start of filtering. pad How many columns should be inserted before end of filtering. Normally the filter shifts and tilts from the very first frame, and stops when the last one is received. However, before filtering starts, normal video may be preseved, so that the effect is slowly shifted in its place. Similarly, the last video frame may be reconstructed at the end. Alternatively it is possible to just start and end with black. ‘none’ Filtering starts immediately and ends when the last frame is received. ‘frame’ The first frames or the very last frame are kept intact during processing. ‘black’ Black is padded at the beginning or at the end of filtering. ### 39.251 tinterlace Perform various types of temporal field interlacing. Frames are counted starting from 1, so the first input frame is considered odd. The filter accepts the following options: mode Specify the mode of the interlacing. This option can also be specified as a value alone. See below for a list of values for this option. Available values are: ‘merge, 0’ Move odd frames into the upper field, even into the lower field, generating a double height frame at half frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 Output: 11111 33333 22222 44444 11111 33333 22222 44444 11111 33333 22222 44444 11111 33333 22222 44444 ‘drop\_even, 1’ Only output odd frames, even frames are dropped, generating a frame with unchanged height at half frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 Output: 11111 33333 11111 33333 11111 33333 11111 33333 ‘drop\_odd, 2’ Only output even frames, odd frames are dropped, generating a frame with unchanged height at half frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 Output: 22222 44444 22222 44444 22222 44444 22222 44444 ‘pad, 3’ Expand each frame to full height, but pad alternate lines with black, generating a frame with double height at the same input frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 Output: 11111 ..... 33333 ..... ..... 22222 ..... 44444 11111 ..... 33333 ..... ..... 22222 ..... 44444 11111 ..... 33333 ..... ..... 22222 ..... 44444 11111 ..... 33333 ..... ..... 22222 ..... 44444 ‘interleave\_top, 4’ Interleave the upper field from odd frames with the lower field from even frames, generating a frame with unchanged height at half frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111<- 22222 33333<- 44444 11111 22222<- 33333 44444<- 11111<- 22222 33333<- 44444 11111 22222<- 33333 44444<- Output: 11111 33333 22222 44444 11111 33333 22222 44444 ‘interleave\_bottom, 5’ Interleave the lower field from odd frames with the upper field from even frames, generating a frame with unchanged height at half frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222<- 33333 44444<- 11111<- 22222 33333<- 44444 11111 22222<- 33333 44444<- 11111<- 22222 33333<- 44444 Output: 22222 44444 11111 33333 22222 44444 11111 33333 ‘interlacex2, 6’ Double frame rate with unchanged height. Frames are inserted each containing the second temporal field from the previous input frame and the first temporal field from the next input frame. This mode relies on the top\_field\_first flag. Useful for interlaced video displays with no field synchronisation. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 Output: 11111 22222 22222 33333 33333 44444 44444 11111 11111 22222 22222 33333 33333 44444 11111 22222 22222 33333 33333 44444 44444 11111 11111 22222 22222 33333 33333 44444 ‘mergex2, 7’ Move odd frames into the upper field, even into the lower field, generating a double height frame at same frame rate. ------> time Input: Frame 1 Frame 2 Frame 3 Frame 4 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 11111 22222 33333 44444 Output: 11111 33333 33333 55555 22222 22222 44444 44444 11111 33333 33333 55555 22222 22222 44444 44444 11111 33333 33333 55555 22222 22222 44444 44444 11111 33333 33333 55555 22222 22222 44444 44444 Numeric values are deprecated but are accepted for backward compatibility reasons. Default mode is `merge`. flags Specify flags influencing the filter process. Available value for flags is: low\_pass\_filter, vlpf Enable linear vertical low-pass filtering in the filter. Vertical low-pass filtering is required when creating an interlaced destination from a progressive source which contains high-frequency vertical detail. Filtering will reduce interlace ’twitter’ and Moire patterning. complex\_filter, cvlpf Enable complex vertical low-pass filtering. This will slightly less reduce interlace ’twitter’ and Moire patterning but better retain detail and subjective sharpness impression. bypass\_il Bypass already interlaced frames, only adjust the frame rate. Vertical low-pass filtering and bypassing already interlaced frames can only be enabled for mode interleave\_top and interleave\_bottom. ### 39.252 tmedian Pick median pixels from several successive input video frames. The filter accepts the following options: radius Set radius of median filter. Default is 1. Allowed range is from 1 to 127. planes Set which planes to filter. Default value is `15`, by which all planes are processed. percentile Set median percentile. Default value is `0.5`. Default value of `0.5` will pick always median values, while `0` will pick minimum values, and `1` maximum values. #### 39.252.1 Commands This filter supports all above options as commands, excluding option `radius`. ### 39.253 tmidequalizer Apply Temporal Midway Video Equalization effect. Midway Video Equalization adjusts a sequence of video frames to have the same histograms, while maintaining their dynamics as much as possible. It’s useful for e.g. matching exposures from a video frames sequence. This filter accepts the following option: radius Set filtering radius. Default is `5`. Allowed range is from 1 to 127. sigma Set filtering sigma. Default is `0.5`. This controls strength of filtering. Setting this option to 0 effectively does nothing. planes Set which planes to process. Default is `15`, which is all available planes. ### 39.254 tmix Mix successive video frames. A description of the accepted options follows. frames The number of successive frames to mix. If unspecified, it defaults to 3. weights Specify weight of each input video frame. Each weight is separated by space. If number of weights is smaller than number of frames last specified weight will be used for all remaining unset weights. scale Specify scale, if it is set it will be multiplied with sum of each weight multiplied with pixel values to give final destination pixel value. By default scale is auto scaled to sum of weights. planes Set which planes to filter. Default is all. Allowed range is from 0 to 15. #### 39.254.1 Examples * Average 7 successive frames: tmix=frames=7:weights="1 1 1 1 1 1 1" * Apply simple temporal convolution: tmix=frames=3:weights="-1 3 -1" * Similar as above but only showing temporal differences: tmix=frames=3:weights="-1 2 -1":scale=1 #### 39.254.2 Commands This filter supports the following commands: weights scale planes Syntax is same as option with same name. ### 39.255 tonemap Tone map colors from different dynamic ranges. This filter expects data in single precision floating point, as it needs to operate on (and can output) out-of-range values. Another filter, such as zscale, is needed to convert the resulting frame to a usable format. The tonemapping algorithms implemented only work on linear light, so input data should be linearized beforehand (and possibly correctly tagged). ffmpeg -i INPUT -vf zscale=transfer=linear,tonemap=clip,zscale=transfer=bt709,format=yuv420p OUTPUT #### 39.255.1 Options The filter accepts the following options. tonemap Set the tone map algorithm to use. Possible values are: none Do not apply any tone map, only desaturate overbright pixels. clip Hard-clip any out-of-range values. Use it for perfect color accuracy for in-range values, while distorting out-of-range values. linear Stretch the entire reference gamut to a linear multiple of the display. gamma Fit a logarithmic transfer between the tone curves. reinhard Preserve overall image brightness with a simple curve, using nonlinear contrast, which results in flattening details and degrading color accuracy. hable Preserve both dark and bright details better than reinhard, at the cost of slightly darkening everything. Use it when detail preservation is more important than color and brightness accuracy. mobius Smoothly map out-of-range values, while retaining contrast and colors for in-range material as much as possible. Use it when color accuracy is more important than detail preservation. Default is none. param Tune the tone mapping algorithm. This affects the following algorithms: none Ignored. linear Specifies the scale factor to use while stretching. Default to 1.0. gamma Specifies the exponent of the function. Default to 1.8. clip Specify an extra linear coefficient to multiply into the signal before clipping. Default to 1.0. reinhard Specify the local contrast coefficient at the display peak. Default to 0.5, which means that in-gamut values will be about half as bright as when clipping. hable Ignored. mobius Specify the transition point from linear to mobius transform. Every value below this point is guaranteed to be mapped 1:1. The higher the value, the more accurate the result will be, at the cost of losing bright details. Default to 0.3, which due to the steep initial slope still preserves in-range colors fairly accurately. desat Apply desaturation for highlights that exceed this level of brightness. The higher the parameter, the more color information will be preserved. This setting helps prevent unnaturally blown-out colors for super-highlights, by (smoothly) turning into white instead. This makes images feel more natural, at the cost of reducing information about out-of-range colors. The default of 2.0 is somewhat conservative and will mostly just apply to skies or directly sunlit surfaces. A setting of 0.0 disables this option. This option works only if the input frame has a supported color tag. peak Override signal/nominal/reference peak with this value. Useful when the embedded peak information in display metadata is not reliable or when tone mapping from a lower range to a higher range. ### 39.256 tpad Temporarily pad video frames. The filter accepts the following options: start Specify number of delay frames before input video stream. Default is 0. stop Specify number of padding frames after input video stream. Set to -1 to pad indefinitely. Default is 0. start\_mode Set kind of frames added to beginning of stream. Can be either add or clone. With add frames of solid-color are added. With clone frames are clones of first frame. Default is add. stop\_mode Set kind of frames added to end of stream. Can be either add or clone. With add frames of solid-color are added. With clone frames are clones of last frame. Default is add. start\_duration, stop\_duration Specify the duration of the start/stop delay. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. These options override start and stop. Default is 0. color Specify the color of the padded area. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. The default value of color is "black". ### 39.257 transpose Transpose rows with columns in the input video and optionally flip it. It accepts the following parameters: dir Specify the transposition direction. Can assume the following values: ‘0, 4, cclock\_flip’ Rotate by 90 degrees counterclockwise and vertically flip (default), that is: L.R L.l . . -> . . l.r R.r ‘1, 5, clock’ Rotate by 90 degrees clockwise, that is: L.R l.L . . -> . . l.r r.R ‘2, 6, cclock’ Rotate by 90 degrees counterclockwise, that is: L.R R.r . . -> . . l.r L.l ‘3, 7, clock\_flip’ Rotate by 90 degrees clockwise and vertically flip, that is: L.R r.R . . -> . . l.r l.L For values between 4-7, the transposition is only done if the input video geometry is portrait and not landscape. These values are deprecated, the `passthrough` option should be used instead. Numerical values are deprecated, and should be dropped in favor of symbolic constants. passthrough Do not apply the transposition if the input geometry matches the one specified by the specified value. It accepts the following values: ‘none’ Always apply transposition. ‘portrait’ Preserve portrait geometry (when height >= width). ‘landscape’ Preserve landscape geometry (when width >= height). Default value is `none`. For example to rotate by 90 degrees clockwise and preserve portrait layout: transpose=dir=1:passthrough=portrait The command above can also be specified as: transpose=1:portrait ### 39.258 trim Trim the input so that the output contains one continuous subpart of the input. It accepts the following parameters: start Specify the time of the start of the kept section, i.e. the frame with the timestamp start will be the first frame in the output. end Specify the time of the first frame that will be dropped, i.e. the frame immediately preceding the one with the timestamp end will be the last frame in the output. start\_pts This is the same as start, except this option sets the start timestamp in timebase units instead of seconds. end\_pts This is the same as end, except this option sets the end timestamp in timebase units instead of seconds. duration The maximum duration of the output in seconds. start\_frame The number of the first frame that should be passed to the output. end\_frame The number of the first frame that should be dropped. start, end, and duration are expressed as time duration specifications; see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. Note that the first two sets of the start/end options and the duration option look at the frame timestamp, while the \_frame variants simply count the frames that pass through the filter. Also note that this filter does not modify the timestamps. If you wish for the output timestamps to start at zero, insert a setpts filter after the trim filter. If multiple start or end options are set, this filter tries to be greedy and keep all the frames that match at least one of the specified constraints. To keep only the part that matches all the constraints at once, chain multiple trim filters. The defaults are such that all the input is kept. So it is possible to set e.g. just the end values to keep everything before the specified time. Examples: * Drop everything except the second minute of input: ffmpeg -i INPUT -vf trim=60:120 * Keep only the first second: ffmpeg -i INPUT -vf trim=duration=1 ### 39.259 unpremultiply Apply alpha unpremultiply effect to input video stream using first plane of second stream as alpha. Both streams must have same dimensions and same pixel format. The filter accepts the following option: planes Set which planes will be processed, unprocessed planes will be copied. By default value 0xf, all planes will be processed. If the format has 1 or 2 components, then luma is bit 0. If the format has 3 or 4 components: for RGB formats bit 0 is green, bit 1 is blue and bit 2 is red; for YUV formats bit 0 is luma, bit 1 is chroma-U and bit 2 is chroma-V. If present, the alpha channel is always the last bit. inplace Do not require 2nd input for processing, instead use alpha plane from input stream. ### 39.260 unsharp Sharpen or blur the input video. It accepts the following parameters: luma\_msize\_x, lx Set the luma matrix horizontal size. It must be an odd integer between 3 and 23. The default value is 5. luma\_msize\_y, ly Set the luma matrix vertical size. It must be an odd integer between 3 and 23. The default value is 5. luma\_amount, la Set the luma effect strength. It must be a floating point number, reasonable values lay between -1.5 and 1.5. Negative values will blur the input video, while positive values will sharpen it, a value of zero will disable the effect. Default value is 1.0. chroma\_msize\_x, cx Set the chroma matrix horizontal size. It must be an odd integer between 3 and 23. The default value is 5. chroma\_msize\_y, cy Set the chroma matrix vertical size. It must be an odd integer between 3 and 23. The default value is 5. chroma\_amount, ca Set the chroma effect strength. It must be a floating point number, reasonable values lay between -1.5 and 1.5. Negative values will blur the input video, while positive values will sharpen it, a value of zero will disable the effect. Default value is 0.0. alpha\_msize\_x, ax Set the alpha matrix horizontal size. It must be an odd integer between 3 and 23. The default value is 5. alpha\_msize\_y, ay Set the alpha matrix vertical size. It must be an odd integer between 3 and 23. The default value is 5. alpha\_amount, aa Set the alpha effect strength. It must be a floating point number, reasonable values lay between -1.5 and 1.5. Negative values will blur the input video, while positive values will sharpen it, a value of zero will disable the effect. Default value is 0.0. All parameters are optional and default to the equivalent of the string ’5:5:1.0:5:5:0.0’. #### 39.260.1 Examples * Apply strong luma sharpen effect: unsharp=luma\_msize\_x=7:luma\_msize\_y=7:luma\_amount=2.5 * Apply a strong blur of both luma and chroma parameters: unsharp=7:7:-2:7:7:-2 ### 39.261 untile Decompose a video made of tiled images into the individual images. The frame rate of the output video is the frame rate of the input video multiplied by the number of tiles. This filter does the reverse of tile. The filter accepts the following options: layout Set the grid size (i.e. the number of lines and columns). For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. #### 39.261.1 Examples * Produce a 1-second video from a still image file made of 25 frames stacked vertically, like an analogic film reel: ffmpeg -r 1 -i image.jpg -vf untile=1x25 movie.mkv ### 39.262 uspp Apply ultra slow/simple postprocessing filter that compresses and decompresses the image at several (or - in the case of quality level `8` - all) shifts and average the results. The way this differs from the behavior of spp is that uspp actually encodes & decodes each case with libavcodec Snow, whereas spp uses a simplified intra only 8x8 DCT similar to MJPEG. This filter is not available in ffmpeg versions between 5.0 and 6.0. The filter accepts the following options: quality Set quality. This option defines the number of levels for averaging. It accepts an integer in the range 0-8. If set to `0`, the filter will have no effect. A value of `8` means the higher quality. For each increment of that value the speed drops by a factor of approximately 2. Default value is `3`. qp Force a constant quantization parameter. If not set, the filter will use the QP from the video stream (if available). codec Use specified codec instead of snow. ### 39.263 v360 Convert 360 videos between various formats. The filter accepts the following options: input output Set format of the input/output video. Available formats: ‘e’ ‘equirect’ Equirectangular projection. ‘c3x2’ ‘c6x1’ ‘c1x6’ Cubemap with 3x2/6x1/1x6 layout. Format specific options: in\_pad out\_pad Set padding proportion for the input/output cubemap. Values in decimals. Example values: ‘0’ No padding. ‘0.01’ 1% of face is padding. For example, with 1920x1280 resolution face size would be 640x640 and padding would be 3 pixels from each side. (640 \* 0.01 = 6 pixels) Default value is **‘0’**. Maximum value is **‘0.1’**. fin\_pad fout\_pad Set fixed padding for the input/output cubemap. Values in pixels. Default value is **‘0’**. If greater than zero it overrides other padding options. in\_forder out\_forder Set order of faces for the input/output cubemap. Choose one direction for each position. Designation of directions: ‘r’ right ‘l’ left ‘u’ up ‘d’ down ‘f’ forward ‘b’ back Default value is **‘rludfb’**. in\_frot out\_frot Set rotation of faces for the input/output cubemap. Choose one angle for each position. Designation of angles: ‘0’ 0 degrees clockwise ‘1’ 90 degrees clockwise ‘2’ 180 degrees clockwise ‘3’ 270 degrees clockwise Default value is **‘000000’**. ‘eac’ Equi-Angular Cubemap. ‘flat’ ‘gnomonic’ ‘rectilinear’ Regular video. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘dfisheye’ Dual fisheye. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘barrel’ ‘fb’ ‘barrelsplit’ Facebook’s 360 formats. ‘sg’ Stereographic format. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘mercator’ Mercator format. ‘ball’ Ball format, gives significant distortion toward the back. ‘hammer’ Hammer-Aitoff map projection format. ‘sinusoidal’ Sinusoidal map projection format. ‘fisheye’ Fisheye projection. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘pannini’ Pannini projection. Format specific options: h\_fov Set output pannini parameter. ih\_fov Set input pannini parameter. ‘cylindrical’ Cylindrical projection. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘perspective’ Perspective projection. _(output only)_ Format specific options: v\_fov Set perspective parameter. ‘tetrahedron’ Tetrahedron projection. ‘tsp’ Truncated square pyramid projection. ‘he’ ‘hequirect’ Half equirectangular projection. ‘equisolid’ Equisolid format. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘og’ Orthographic format. Format specific options: h\_fov v\_fov d\_fov Set output horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ih\_fov iv\_fov id\_fov Set input horizontal/vertical/diagonal field of view. Values in degrees. If diagonal field of view is set it overrides horizontal and vertical field of view. ‘octahedron’ Octahedron projection. ‘cylindricalea’ Cylindrical Equal Area projection. interp Set interpolation method. _Note: more complex interpolation methods require much more memory to run._ Available methods: ‘near’ ‘nearest’ Nearest neighbour. ‘line’ ‘linear’ Bilinear interpolation. ‘lagrange9’ Lagrange9 interpolation. ‘cube’ ‘cubic’ Bicubic interpolation. ‘lanc’ ‘lanczos’ Lanczos interpolation. ‘sp16’ ‘spline16’ Spline16 interpolation. ‘gauss’ ‘gaussian’ Gaussian interpolation. ‘mitchell’ Mitchell interpolation. Default value is **‘line’**. w h Set the output video resolution. Default resolution depends on formats. in\_stereo out\_stereo Set the input/output stereo format. ‘2d’ 2D mono ‘sbs’ Side by side ‘tb’ Top bottom Default value is **‘2d’** for input and output format. yaw pitch roll Set rotation for the output video. Values in degrees. rorder Set rotation order for the output video. Choose one item for each position. ‘y, Y’ yaw ‘p, P’ pitch ‘r, R’ roll Default value is **‘ypr’**. h\_flip v\_flip d\_flip Flip the output video horizontally(swaps left-right)/vertically(swaps up-down)/in-depth(swaps back-forward). Boolean values. ih\_flip iv\_flip Set if input video is flipped horizontally/vertically. Boolean values. in\_trans Set if input video is transposed. Boolean value, by default disabled. out\_trans Set if output video needs to be transposed. Boolean value, by default disabled. h\_offset v\_offset Set output horizontal/vertical off-axis offset. Default is set to 0. Allowed range is from -1 to 1. alpha\_mask Build mask in alpha plane for all unmapped pixels by marking them fully transparent. Boolean value, by default disabled. reset\_rot Reset rotation of output video. Boolean value, by default disabled. #### 39.263.1 Examples * Convert equirectangular video to cubemap with 3x2 layout and 1% padding using bicubic interpolation: ffmpeg -i input.mkv -vf v360=e:c3x2:cubic:out\_pad=0.01 output.mkv * Extract back view of Equi-Angular Cubemap: ffmpeg -i input.mkv -vf v360=eac:flat:yaw=180 output.mkv * Convert transposed and horizontally flipped Equi-Angular Cubemap in side-by-side stereo format to equirectangular top-bottom stereo format: v360=eac:equirect:in\_stereo=sbs:in\_trans=1:ih\_flip=1:out\_stereo=tb #### 39.263.2 Commands This filter supports subset of above options as commands. ### 39.264 vaguedenoiser Apply a wavelet based denoiser. It transforms each frame from the video input into the wavelet domain, using Cohen-Daubechies-Feauveau 9/7. Then it applies some filtering to the obtained coefficients. It does an inverse wavelet transform after. Due to wavelet properties, it should give a nice smoothed result, and reduced noise, without blurring picture features. This filter accepts the following options: threshold The filtering strength. The higher, the more filtered the video will be. Hard thresholding can use a higher threshold than soft thresholding before the video looks overfiltered. Default value is 2. method The filtering method the filter will use. It accepts the following values: ‘hard’ All values under the threshold will be zeroed. ‘soft’ All values under the threshold will be zeroed. All values above will be reduced by the threshold. ‘garrote’ Scales or nullifies coefficients - intermediary between (more) soft and (less) hard thresholding. Default is garrote. nsteps Number of times, the wavelet will decompose the picture. Picture can’t be decomposed beyond a particular point (typically, 8 for a 640x480 frame - as 2^9 = 512 > 480). Valid values are integers between 1 and 32. Default value is 6. percent Partial of full denoising (limited coefficients shrinking), from 0 to 100. Default value is 85. planes A list of the planes to process. By default all planes are processed. type The threshold type the filter will use. It accepts the following values: ‘universal’ Threshold used is same for all decompositions. ‘bayes’ Threshold used depends also on each decomposition coefficients. Default is universal. ### 39.265 varblur Apply variable blur filter by using 2nd video stream to set blur radius. The 2nd stream must have the same dimensions. This filter accepts the following options: min\_r Set min allowed radius. Allowed range is from 0 to 254. Default is 0. max\_r Set max allowed radius. Allowed range is from 1 to 255. Default is 8. planes Set which planes to process. By default, all are used. The `varblur` filter also supports the framesync options. #### 39.265.1 Commands This filter supports all the above options as commands. ### 39.266 vectorscope Display 2 color component values in the two dimensional graph (which is called a vectorscope). This filter accepts the following options: mode, m Set vectorscope mode. It accepts the following values: ‘gray’ ‘tint’ Gray values are displayed on graph, higher brightness means more pixels have same component color value on location in graph. This is the default mode. ‘color’ Gray values are displayed on graph. Surrounding pixels values which are not present in video frame are drawn in gradient of 2 color components which are set by option `x` and `y`. The 3rd color component is static. ‘color2’ Actual color components values present in video frame are displayed on graph. ‘color3’ Similar as color2 but higher frequency of same values `x` and `y` on graph increases value of another color component, which is luminance by default values of `x` and `y`. ‘color4’ Actual colors present in video frame are displayed on graph. If two different colors map to same position on graph then color with higher value of component not present in graph is picked. ‘color5’ Gray values are displayed on graph. Similar to `color` but with 3rd color component picked from radial gradient. x Set which color component will be represented on X-axis. Default is `1`. y Set which color component will be represented on Y-axis. Default is `2`. intensity, i Set intensity, used by modes: gray, color, color3 and color5 for increasing brightness of color component which represents frequency of (X, Y) location in graph. envelope, e ‘none’ No envelope, this is default. ‘instant’ Instant envelope, even darkest single pixel will be clearly highlighted. ‘peak’ Hold maximum and minimum values presented in graph over time. This way you can still spot out of range values without constantly looking at vectorscope. ‘peak+instant’ Peak and instant envelope combined together. graticule, g Set what kind of graticule to draw. ‘none’ ‘green’ ‘color’ ‘invert’ opacity, o Set graticule opacity. flags, f Set graticule flags. ‘white’ Draw graticule for white point. ‘black’ Draw graticule for black point. ‘name’ Draw color points short names. bgopacity, b Set background opacity. lthreshold, l Set low threshold for color component not represented on X or Y axis. Values lower than this value will be ignored. Default is 0. Note this value is multiplied with actual max possible value one pixel component can have. So for 8-bit input and low threshold value of 0.1 actual threshold is 0.1 \* 255 = 25. hthreshold, h Set high threshold for color component not represented on X or Y axis. Values higher than this value will be ignored. Default is 1. Note this value is multiplied with actual max possible value one pixel component can have. So for 8-bit input and high threshold value of 0.9 actual threshold is 0.9 \* 255 = 230. colorspace, c Set what kind of colorspace to use when drawing graticule. ‘auto’ ‘601’ ‘709’ Default is auto. tint0, t0 tint1, t1 Set color tint for gray/tint vectorscope mode. By default both options are zero. This means no tint, and output will remain gray. ### 39.267 vidstabdetect Analyze video stabilization/deshaking. Perform pass 1 of 2, see vidstabtransform for pass 2. This filter generates a file with relative translation and rotation transform information about subsequent frames, which is then used by the vidstabtransform filter. To enable compilation of this filter you need to configure FFmpeg with `--enable-libvidstab`. This filter accepts the following options: result Set the path to the file used to write the transforms information. Default value is transforms.trf. shakiness Set how shaky the video is and how quick the camera is. It accepts an integer in the range 1-10, a value of 1 means little shakiness, a value of 10 means strong shakiness. Default value is 5. accuracy Set the accuracy of the detection process. It must be a value in the range 1-15. A value of 1 means low accuracy, a value of 15 means high accuracy. Default value is 15. stepsize Set stepsize of the search process. The region around minimum is scanned with 1 pixel resolution. Default value is 6. mincontrast Set minimum contrast. Below this value a local measurement field is discarded. Must be a floating point value in the range 0-1. Default value is 0.3. tripod Set reference frame number for tripod mode. If enabled, the motion of the frames is compared to a reference frame in the filtered stream, identified by the specified number. The idea is to compensate all movements in a more-or-less static scene and keep the camera view absolutely still. If set to 0, it is disabled. The frames are counted starting from 1. show Show fields and transforms in the resulting frames. It accepts an integer in the range 0-2. Default value is 0, which disables any visualization. fileformat Format for the transforms data file to be written. Acceptable values are ‘ascii’ Human-readable plain text ‘binary’ Binary format, roughly 40% smaller than `ascii`. (_default_) #### 39.267.1 Examples * Use default values: vidstabdetect * Analyze strongly shaky movie and put the results in file mytransforms.trf: vidstabdetect=shakiness=10:accuracy=15:result="mytransforms.trf" * Visualize the result of internal transformations in the resulting video: vidstabdetect=show=1 * Analyze a video with medium shakiness using `ffmpeg`: ffmpeg -i input -vf vidstabdetect=shakiness=5:show=1 dummy.avi ### 39.268 vidstabtransform Video stabilization/deshaking: pass 2 of 2, see vidstabdetect for pass 1. Read a file with transform information for each frame and apply/compensate them. Together with the vidstabdetect filter this can be used to deshake videos. See also http://public.hronopik.de/vid.stab. It is important to also use the unsharp filter, see below. To enable compilation of this filter you need to configure FFmpeg with `--enable-libvidstab`. #### 39.268.1 Options input Set path to the file used to read the transforms. Default value is transforms.trf. smoothing Set the number of frames (value\*2 + 1) used for lowpass filtering the camera movements. Default value is 10. For example a number of 10 means that 21 frames are used (10 in the past and 10 in the future) to smoothen the motion in the video. A larger value leads to a smoother video, but limits the acceleration of the camera (pan/tilt movements). 0 is a special case where a static camera is simulated. optalgo Set the camera path optimization algorithm. Accepted values are: ‘gauss’ gaussian kernel low-pass filter on camera motion (default) ‘avg’ averaging on transformations maxshift Set maximal number of pixels to translate frames. Default value is -1, meaning no limit. maxangle Set maximal angle in radians (degree\*PI/180) to rotate frames. Default value is -1, meaning no limit. crop Specify how to deal with borders that may be visible due to movement compensation. Available values are: ‘keep’ keep image information from previous frame (default) ‘black’ fill the border black invert Invert transforms if set to 1. Default value is 0. relative Consider transforms as relative to previous frame if set to 1, absolute if set to 0. Default value is 0. zoom Set percentage to zoom. A positive value will result in a zoom-in effect, a negative value in a zoom-out effect. Default value is 0 (no zoom). optzoom Set optimal zooming to avoid borders. Accepted values are: ‘0’ disabled ‘1’ optimal static zoom value is determined (only very strong movements will lead to visible borders) (default) ‘2’ optimal adaptive zoom value is determined (no borders will be visible), see zoomspeed Note that the value given at zoom is added to the one calculated here. zoomspeed Set percent to zoom maximally each frame (enabled when optzoom is set to 2). Range is from 0 to 5, default value is 0.25. interpol Specify type of interpolation. Available values are: ‘no’ no interpolation ‘linear’ linear only horizontal ‘bilinear’ linear in both directions (default) ‘bicubic’ cubic in both directions (slow) tripod Enable virtual tripod mode if set to 1, which is equivalent to `relative=0:smoothing=0`. Default value is 0. Use also `tripod` option of vidstabdetect. debug Increase log verbosity if set to 1. Also the detected global motions are written to the temporary file global\_motions.trf. Default value is 0. #### 39.268.2 Examples * Use `ffmpeg` for a typical stabilization with default values: ffmpeg -i inp.mpeg -vf vidstabtransform,unsharp=5:5:0.8:3:3:0.4 inp\_stabilized.mpeg Note the use of the unsharp filter which is always recommended. * Zoom in a bit more and load transform data from a given file: vidstabtransform=zoom=5:input="mytransforms.trf" * Smoothen the video even more: vidstabtransform=smoothing=30 ### 39.269 vflip Flip the input video vertically. For example, to vertically flip a video with `ffmpeg`: ffmpeg -i in.avi -vf "vflip" out.avi ### 39.270 vfrdet Detect variable frame rate video. This filter tries to detect if the input is variable or constant frame rate. At end it will output number of frames detected as having variable delta pts, and ones with constant delta pts. If there was frames with variable delta, than it will also show min, max and average delta encountered. ### 39.271 vibrance Boost or alter saturation. The filter accepts the following options: intensity Set strength of boost if positive value or strength of alter if negative value. Default is 0. Allowed range is from -2 to 2. rbal Set the red balance. Default is 1. Allowed range is from -10 to 10. gbal Set the green balance. Default is 1. Allowed range is from -10 to 10. bbal Set the blue balance. Default is 1. Allowed range is from -10 to 10. rlum Set the red luma coefficient. glum Set the green luma coefficient. blum Set the blue luma coefficient. alternate If `intensity` is negative and this is set to 1, colors will change, otherwise colors will be less saturated, more towards gray. #### 39.271.1 Commands This filter supports the all above options as commands. ### 39.272 vif Obtain the average VIF (Visual Information Fidelity) between two input videos. This filter takes two input videos. Both input videos must have the same resolution and pixel format for this filter to work correctly. Also it assumes that both inputs have the same number of frames, which are compared one by one. The obtained average VIF score is printed through the logging system. The filter stores the calculated VIF score of each frame. This filter also supports the framesync options. In the below example the input file main.mpg being processed is compared with the reference file ref.mpg. ffmpeg -i main.mpg -i ref.mpg -lavfi vif -f null - ### 39.273 vignette Make or reverse a natural vignetting effect. The filter accepts the following options: angle, a Set lens angle expression as a number of radians. The value is clipped in the `[0,PI/2]` range. Default value: `"PI/5"` x0 y0 Set center coordinates expressions. Respectively `"w/2"` and `"h/2"` by default. mode Set forward/backward mode. Available modes are: ‘forward’ The larger the distance from the central point, the darker the image becomes. ‘backward’ The larger the distance from the central point, the brighter the image becomes. This can be used to reverse a vignette effect, though there is no automatic detection to extract the lens angle and other settings (yet). It can also be used to create a burning effect. Default value is ‘forward’. eval Set evaluation mode for the expressions (angle, x0, y0). It accepts the following values: ‘init’ Evaluate expressions only once during the filter initialization. ‘frame’ Evaluate expressions for each incoming frame. This is way slower than the ‘init’ mode since it requires all the scalers to be re-computed, but it allows advanced dynamic expressions. Default value is ‘init’. dither Set dithering to reduce the circular banding effects. Default is `1` (enabled). aspect Set vignette aspect. This setting allows one to adjust the shape of the vignette. Setting this value to the SAR of the input will make a rectangular vignetting following the dimensions of the video. Default is `1/1`. #### 39.273.1 Expressions The alpha, x0 and y0 expressions can contain the following parameters. w h input width and height n the number of input frame, starting from 0 pts the PTS (Presentation TimeStamp) time of the filtered video frame, expressed in TB units, NAN if undefined r frame rate of the input video, NAN if the input frame rate is unknown t the PTS (Presentation TimeStamp) of the filtered video frame, expressed in seconds, NAN if undefined tb time base of the input video #### 39.273.2 Examples * Apply simple strong vignetting effect: vignette=PI/4 * Make a flickering vignetting: vignette='PI/4+random(1)\*PI/50':eval=frame ### 39.274 vmafmotion Obtain the average VMAF motion score of a video. It is one of the component metrics of VMAF. The obtained average motion score is printed through the logging system. The filter accepts the following options: stats\_file If specified, the filter will use the named file to save the motion score of each frame with respect to the previous frame. When filename equals "-" the data is sent to standard output. Example: ffmpeg -i ref.mpg -vf vmafmotion -f null - ### 39.275 vpp\_amf Scale (resize) and convert colorspace, transfer characteristics or color primaries for the input video, using AMD Advanced Media Framework library for hardware acceleration. Setting the output width and height works in the same way as for the scale filter. The filter accepts the following options: w h Set the output video dimension expression. Default value is the input dimension. Allows for the same expressions as the scale filter. scale\_type Sets the algorithm used for scaling: bilinear Bilinear This is the default. bicubic Bicubic format Controls the output pixel format. By default, or if none is specified, the input pixel format is used. force\_original\_aspect\_ratio force\_divisible\_by Work the same as the identical scale filter options. reset\_sar Works the same as the identical scale filter option. color\_profile Specify all color properties at once. The accepted values are: ‘bt601’ BT.601 ‘bt709’ BT.709 ‘bt2020’ BT.2020 trc Specify output transfer characteristics. The accepted values are: ‘bt709’ BT.709 ‘gamma22’ Constant gamma of 2.2 ‘gamma28’ Constant gamma of 2.8 ‘smpte170m’ SMPTE-170M ‘smpte240m’ SMPTE-240M ‘linear’ Linear ‘log’ LOG ‘log-sqrt’ LOG\_SQRT ‘iec61966-2-4’ iec61966-2-4 ‘bt1361-ecg’ BT1361\_ECG ‘iec61966-2-1’ iec61966-2-1 ‘bt2020-10’ BT.2020 for 10-bits content ‘bt2020-12’ BT.2020 for 12-bits content ‘smpte2084’ SMPTE2084 ‘smpte428’ SMPTE428 ‘arib-std-b67’ ARIB\_STD\_B67 primaries Specify output color primaries. The accepted values are: ‘bt709’ BT.709 ‘bt470m’ BT.470M ‘bt470bg’ BT.470BG or BT.601-6 625 ‘smpte170m’ SMPTE-170M or BT.601-6 525 ‘smpte240m’ SMPTE-240M ‘film’ film ‘bt2020’ BT.2020 ‘smpte428’ SMPTE-428 ‘smpte431’ SMPTE-431 ‘smpte432’ SMPTE-432 ‘jedec-p22’ JEDEC P22 phosphors #### 39.275.1 Examples * Scale input to 720p, keeping aspect ratio and ensuring the output is yuv420p. vpp\_amf=-2:720:format=yuv420p * Upscale to 4K and change color profile to bt2020. vpp\_amf=4096:2160:color\_profile=bt2020 ### 39.276 vstack Stack input videos vertically. All streams must be of same pixel format and of same width. Note that this filter is faster than using overlay and pad filter to create same output. The filter accepts the following options: inputs Set number of input streams. Default is 2. shortest If set to 1, force the output to terminate when the shortest input terminates. Default value is 0. ### 39.277 w3fdif Deinterlace the input video ("w3fdif" stands for "Weston 3 Field Deinterlacing Filter"). Based on the process described by Martin Weston for BBC R&D, and implemented based on the de-interlace algorithm written by Jim Easterbrook for BBC R&D, the Weston 3 field deinterlacing filter uses filter coefficients calculated by BBC R&D. This filter uses field-dominance information in frame to decide which of each pair of fields to place first in the output. If it gets it wrong use setfield filter before `w3fdif` filter. There are two sets of filter coefficients, so called "simple" and "complex". Which set of filter coefficients is used can be set by passing an optional parameter: filter Set the interlacing filter coefficients. Accepts one of the following values: ‘simple’ Simple filter coefficient set. ‘complex’ More-complex filter coefficient set. Default value is ‘complex’. mode The interlacing mode to adopt. It accepts one of the following values: frame Output one frame for each frame. field Output one frame for each field. The default value is `field`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: tff Assume the top field is first. bff Assume the bottom field is first. auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: ‘all’ Deinterlace all frames, ‘interlaced’ Only deinterlace frames marked as interlaced. Default value is ‘all’. #### 39.277.1 Commands This filter supports same commands as options. ### 39.278 waveform Video waveform monitor. The waveform monitor plots color component intensity. By default luma only. Each column of the waveform corresponds to a column of pixels in the source video. It accepts the following options: mode, m Can be either `row`, or `column`. Default is `column`. In row mode, the graph on the left side represents color component value 0 and the right side represents value = 255. In column mode, the top side represents color component value = 0 and bottom side represents value = 255. intensity, i Set intensity. Smaller values are useful to find out how many values of the same luminance are distributed across input rows/columns. Default value is `0.04`. Allowed range is \[0, 1\]. mirror, r Set mirroring mode. `0` means unmirrored, `1` means mirrored. In mirrored mode, higher values will be represented on the left side for `row` mode and at the top for `column` mode. Default is `1` (mirrored). display, d Set display mode. It accepts the following values: ‘overlay’ Presents information identical to that in the `parade`, except that the graphs representing color components are superimposed directly over one another. This display mode makes it easier to spot relative differences or similarities in overlapping areas of the color components that are supposed to be identical, such as neutral whites, grays, or blacks. ‘stack’ Display separate graph for the color components side by side in `row` mode or one below the other in `column` mode. ‘parade’ Display separate graph for the color components side by side in `column` mode or one below the other in `row` mode. Using this display mode makes it easy to spot color casts in the highlights and shadows of an image, by comparing the contours of the top and the bottom graphs of each waveform. Since whites, grays, and blacks are characterized by exactly equal amounts of red, green, and blue, neutral areas of the picture should display three waveforms of roughly equal width/height. If not, the correction is easy to perform by making level adjustments the three waveforms. Default is `stack`. components, c Set which color components to display. Default is 1, which means only luma or red color component if input is in RGB colorspace. If is set for example to 7 it will display all 3 (if) available color components. envelope, e ‘none’ No envelope, this is default. ‘instant’ Instant envelope, minimum and maximum values presented in graph will be easily visible even with small `step` value. ‘peak’ Hold minimum and maximum values presented in graph across time. This way you can still spot out of range values without constantly looking at waveforms. ‘peak+instant’ Peak and instant envelope combined together. filter, f ‘lowpass’ No filtering, this is default. ‘flat’ Luma and chroma combined together. ‘aflat’ Similar as above, but shows difference between blue and red chroma. ‘xflat’ Similar as above, but use different colors. ‘yflat’ Similar as above, but again with different colors. ‘chroma’ Displays only chroma. ‘color’ Displays actual color value on waveform. ‘acolor’ Similar as above, but with luma showing frequency of chroma values. graticule, g Set which graticule to display. ‘none’ Do not display graticule. ‘green’ Display green graticule showing legal broadcast ranges. ‘orange’ Display orange graticule showing legal broadcast ranges. ‘invert’ Display invert graticule showing legal broadcast ranges. opacity, o Set graticule opacity. flags, fl Set graticule flags. ‘numbers’ Draw numbers above lines. By default enabled. ‘dots’ Draw dots instead of lines. scale, s Set scale used for displaying graticule. ‘digital’ ‘millivolts’ ‘ire’ Default is digital. bgopacity, b Set background opacity. tint0, t0 tint1, t1 Set tint for output. Only used with lowpass filter and when display is not overlay and input pixel formats are not RGB. fitmode, fm Set sample aspect ratio of video output frames. Can be used to configure waveform so it is not streched too much in one of directions. ‘none’ Set sample aspect ration to 1/1. ‘size’ Set sample aspect ratio to match input size of video Default is ‘none’. input Set input formats for filter to pick from. Can be ‘all’, for selecting from all available formats, or ‘first’, for selecting first available format. Default is ‘first’. ### 39.279 weave, doubleweave The `weave` takes a field-based video input and join each two sequential fields into single frame, producing a new double height clip with half the frame rate and half the frame count. The `doubleweave` works same as `weave` but without halving frame rate and frame count. It accepts the following option: first\_field Set first field. Available values are: ‘top, t’ Set the frame as top-field-first. ‘bottom, b’ Set the frame as bottom-field-first. #### 39.279.1 Examples * Interlace video using select and separatefields filter: separatefields,select=eq(mod(n,4),0)+eq(mod(n,4),3),weave ### 39.280 xbr Apply the xBR high-quality magnification filter which is designed for pixel art. It follows a set of edge-detection rules, see https://forums.libretro.com/t/xbr-algorithm-tutorial/123. It accepts the following option: n Set the scaling dimension: `2` for `2xBR`, `3` for `3xBR` and `4` for `4xBR`. Default is `3`. ### 39.281 xcorrelate Apply normalized cross-correlation between first and second input video stream. Second input video stream dimensions must be lower than first input video stream. The filter accepts the following options: planes Set which planes to process. secondary Set which secondary video frames will be processed from second input video stream, can be first or all. Default is all. The `xcorrelate` filter also supports the framesync options. ### 39.282 xfade Apply cross fade from one input video stream to another input video stream. The cross fade is applied for specified duration. Both inputs must be constant frame-rate and have the same resolution, pixel format, frame rate and timebase. The filter accepts the following options: transition Set one of available transition effects: ‘custom’ ‘fade’ ‘wipeleft’ ‘wiperight’ ‘wipeup’ ‘wipedown’ ‘slideleft’ ‘slideright’ ‘slideup’ ‘slidedown’ ‘circlecrop’ ‘rectcrop’ ‘distance’ ‘fadeblack’ ‘fadewhite’ ‘radial’ ‘smoothleft’ ‘smoothright’ ‘smoothup’ ‘smoothdown’ ‘circleopen’ ‘circleclose’ ‘vertopen’ ‘vertclose’ ‘horzopen’ ‘horzclose’ ‘dissolve’ ‘pixelize’ ‘diagtl’ ‘diagtr’ ‘diagbl’ ‘diagbr’ ‘hlslice’ ‘hrslice’ ‘vuslice’ ‘vdslice’ ‘hblur’ ‘fadegrays’ ‘wipetl’ ‘wipetr’ ‘wipebl’ ‘wipebr’ ‘squeezeh’ ‘squeezev’ ‘zoomin’ ‘fadefast’ ‘fadeslow’ ‘hlwind’ ‘hrwind’ ‘vuwind’ ‘vdwind’ ‘coverleft’ ‘coverright’ ‘coverup’ ‘coverdown’ ‘revealleft’ ‘revealright’ ‘revealup’ ‘revealdown’ Default transition effect is fade. duration Set cross fade duration in seconds. Range is 0 to 60 seconds. Default duration is 1 second. offset Set cross fade start relative to first input stream in seconds. Default offset is 0. expr Set expression for custom transition effect. The expressions can use the following variables and functions: X Y The coordinates of the current sample. W H The width and height of the image. P Progress of transition effect. PLANE Currently processed plane. A Return value of first input at current location and plane. B Return value of second input at current location and plane. a0(x, y) a1(x, y) a2(x, y) a3(x, y) Return the value of the pixel at location (x,y) of the first/second/third/fourth component of first input. b0(x, y) b1(x, y) b2(x, y) b3(x, y) Return the value of the pixel at location (x,y) of the first/second/third/fourth component of second input. #### 39.282.1 Examples * Cross fade from one input video to another input video, with fade transition and duration of transition of 2 seconds starting at offset of 5 seconds: ffmpeg -i first.mp4 -i second.mp4 -filter\_complex xfade=transition=fade:duration=2:offset=5 output.mp4 ### 39.283 xmedian Pick median pixels from several input videos. The filter accepts the following options: inputs Set number of inputs. Default is 3. Allowed range is from 3 to 255. If number of inputs is even number, than result will be mean value between two median values. planes Set which planes to filter. Default value is `15`, by which all planes are processed. percentile Set median percentile. Default value is `0.5`. Default value of `0.5` will pick always median values, while `0` will pick minimum values, and `1` maximum values. #### 39.283.1 Commands This filter supports all above options as commands, excluding option `inputs`. ### 39.284 xpsnr Obtain the average (across all input frames) and minimum (across all color plane averages) eXtended Perceptually weighted peak Signal-to-Noise Ratio (XPSNR) between two input videos. The XPSNR is a low-complexity psychovisually motivated distortion measurement algorithm for assessing the difference between two video streams or images. This is especially useful for objectively quantifying the distortions caused by video and image codecs, as an alternative to a formal subjective test. The logarithmic XPSNR output values are in a similar range as those of traditional psnr assessments but better reflect human impressions of visual coding quality. More details on the XPSNR measure, which essentially represents a blockwise weighted variant of the PSNR measure, can be found in the following freely available papers: * C. R. Helmrich, M. Siekmann, S. Becker, S. Bosse, D. Marpe, and T. Wiegand, "XPSNR: A Low-Complexity Extension of the Perceptually Weighted Peak Signal-to-Noise Ratio for High-Resolution Video Quality Assessment," in Proc. IEEE Int. Conf. Acoustics, Speech, Sig. Process. (ICASSP), virt./online, May 2020. www.ecodis.de/xpsnr.htm * C. R. Helmrich, S. Bosse, H. Schwarz, D. Marpe, and T. Wiegand, "A Study of the Extended Perceptually Weighted Peak Signal-to-Noise Ratio (XPSNR) for Video Compression with Different Resolutions and Bit Depths," ITU Journal: ICT Discoveries, vol. 3, no. 1, pp. 65 - 72, May 2020. http://handle.itu.int/11.1002/pub/8153d78b-en When publishing the results of XPSNR assessments obtained using, e.g., this FFmpeg filter, a reference to the above papers as a means of documentation is strongly encouraged. The filter requires two input videos. The first input is considered a (usually not distorted) reference source and is passed unchanged to the output, whereas the second input is a (distorted) test signal. Except for the bit depth, these two video inputs must have the same pixel format. In addition, for best performance, both compared input videos should be in YCbCr color format. The obtained overall XPSNR values mentioned above are printed through the logging system. In case of input with multiple color planes, we suggest reporting of the minimum XPSNR average. The following parameter, which behaves like the one for the psnr filter, is accepted: stats\_file, f If specified, the filter will use the named file to save the XPSNR value of each individual frame and color plane. When the file name equals "-", that data is sent to standard output. This filter also supports the framesync options. #### 39.284.1 Examples * XPSNR analysis of two 1080p HD videos, ref\_source.yuv and test\_video.yuv, both at 24 frames per second, with color format 4:2:0, bit depth 8, and output of a logfile named "xpsnr.log": ffmpeg -s 1920x1080 -framerate 24 -pix\_fmt yuv420p -i ref\_source.yuv -s 1920x1080 -framerate 24 -pix\_fmt yuv420p -i test\_video.yuv -lavfi xpsnr="stats\_file=xpsnr.log" -f null - * XPSNR analysis of two 2160p UHD videos, ref\_source.yuv with bit depth 8 and test\_video.yuv with bit depth 10, both at 60 frames per second with color format 4:2:0, no logfile output: ffmpeg -s 3840x2160 -framerate 60 -pix\_fmt yuv420p -i ref\_source.yuv -s 3840x2160 -framerate 60 -pix\_fmt yuv420p10le -i test\_video.yuv -lavfi xpsnr="stats\_file=-" -f null - ### 39.285 xstack Stack video inputs into custom layout. All streams must be of same pixel format. The filter accepts the following options: inputs Set number of input streams. Default is 2. layout Specify layout of inputs. This option requires the desired layout configuration to be explicitly set by the user. This sets position of each video input in output. Each input is separated by ’|’. The first number represents the column, and the second number represents the row. Numbers start at 0 and are separated by ’\_’. Optionally one can use wX and hX, where X is video input from which to take width or height. Multiple values can be used when separated by ’+’. In such case values are summed together. Note that if inputs are of different sizes gaps may appear, as not all of the output video frame will be filled. Similarly, videos can overlap each other if their position doesn’t leave enough space for the full frame of adjoining videos. For 2 inputs, a default layout of `0_0|w0_0` (equivalent to `grid=2x1`) is set. In all other cases, a layout or a grid must be set by the user. Either `grid` or `layout` can be specified at a time. Specifying both will result in an error. grid Specify a fixed size grid of inputs. This option is used to create a fixed size grid of the input streams. Set the grid size in the form `COLUMNSxROWS`. There must be `ROWS * COLUMNS` input streams and they will be arranged as a grid with `ROWS` rows and `COLUMNS` columns. When using this option, each input stream within a row must have the same height and all the rows must have the same width. If `grid` is set, then `inputs` option is ignored and is implicitly set to `ROWS * COLUMNS`. For 2 inputs, a default grid of `2x1` (equivalent to `layout=0_0|w0_0`) is set. In all other cases, a layout or a grid must be set by the user. Either `grid` or `layout` can be specified at a time. Specifying both will result in an error. shortest If set to 1, force the output to terminate when the shortest input terminates. Default value is 0. fill If set to valid color, all unused pixels will be filled with that color. By default fill is set to none, so it is disabled. #### 39.285.1 Examples * Display 4 inputs into 2x2 grid. Layout: input1(0, 0) | input3(w0, 0) input2(0, h0) | input4(w0, h0) xstack=inputs=4:layout=0\_0|0\_h0|w0\_0|w0\_h0 Note that if inputs are of different sizes, gaps or overlaps may occur. * Display 4 inputs into 1x4 grid. Layout: input1(0, 0) input2(0, h0) input3(0, h0+h1) input4(0, h0+h1+h2) xstack=inputs=4:layout=0\_0|0\_h0|0\_h0+h1|0\_h0+h1+h2 Note that if inputs are of different widths, unused space will appear. * Display 9 inputs into 3x3 grid. Layout: input1(0, 0) | input4(w0, 0) | input7(w0+w3, 0) input2(0, h0) | input5(w0, h0) | input8(w0+w3, h0) input3(0, h0+h1) | input6(w0, h0+h1) | input9(w0+w3, h0+h1) xstack=inputs=9:layout=0\_0|0\_h0|0\_h0+h1|w0\_0|w0\_h0|w0\_h0+h1|w0+w3\_0|w0+w3\_h0|w0+w3\_h0+h1 Note that if inputs are of different sizes, gaps or overlaps may occur. * Display 16 inputs into 4x4 grid. Layout: input1(0, 0) | input5(w0, 0) | input9 (w0+w4, 0) | input13(w0+w4+w8, 0) input2(0, h0) | input6(w0, h0) | input10(w0+w4, h0) | input14(w0+w4+w8, h0) input3(0, h0+h1) | input7(w0, h0+h1) | input11(w0+w4, h0+h1) | input15(w0+w4+w8, h0+h1) input4(0, h0+h1+h2)| input8(w0, h0+h1+h2)| input12(w0+w4, h0+h1+h2)| input16(w0+w4+w8, h0+h1+h2) xstack=inputs=16:layout=0\_0|0\_h0|0\_h0+h1|0\_h0+h1+h2|w0\_0|w0\_h0|w0\_h0+h1|w0\_h0+h1+h2|w0+w4\_0| w0+w4\_h0|w0+w4\_h0+h1|w0+w4\_h0+h1+h2|w0+w4+w8\_0|w0+w4+w8\_h0|w0+w4+w8\_h0+h1|w0+w4+w8\_h0+h1+h2 Note that if inputs are of different sizes, gaps or overlaps may occur. ### 39.286 yadif Deinterlace the input video ("yadif" means "yet another deinterlacing filter"). It accepts the following parameters: mode The interlacing mode to adopt. It accepts one of the following values: 0, send\_frame Output one frame for each frame. 1, send\_field Output one frame for each field. 2, send\_frame\_nospatial Like `send_frame`, but it skips the spatial interlacing check. 3, send\_field\_nospatial Like `send_field`, but it skips the spatial interlacing check. The default value is `send_frame`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: 0, tff Assume the top field is first. 1, bff Assume the bottom field is first. \-1, auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: 0, all Deinterlace all frames. 1, interlaced Only deinterlace frames marked as interlaced. The default value is `all`. ### 39.287 yaepblur Apply blur filter while preserving edges ("yaepblur" means "yet another edge preserving blur filter"). The algorithm is described in "J. S. Lee, Digital image enhancement and noise filtering by use of local statistics, IEEE Trans. Pattern Anal. Mach. Intell. PAMI-2, 1980." It accepts the following parameters: radius, r Set the window radius. Default value is 3. planes, p Set which planes to filter. Default is only the first plane. sigma, s Set blur strength. Default value is 128. #### 39.287.1 Commands This filter supports same commands as options. ### 39.288 zoompan Apply Zoom & Pan effect. This filter accepts the following options: zoom, z Set the zoom expression. Range is 1-10. Default is 1. x y Set the x and y expression. Default is 0. d Set the duration expression in number of frames. This sets for how many number of frames effect will last for single input image. Default is 90. s Set the output image size, default is ’hd720’. fps Set the output frame rate, default is ’25’. Each expression can contain the following constants: in\_w, iw Input width. in\_h, ih Input height. out\_w, ow Output width. out\_h, oh Output height. in Input frame count. on Output frame count. in\_time, it The input timestamp expressed in seconds. It’s NAN if the input timestamp is unknown. out\_time, time, ot The output timestamp expressed in seconds. x y Last calculated ’x’ and ’y’ position from ’x’ and ’y’ expression for current input frame. px py ’x’ and ’y’ of last output frame of previous input frame or 0 when there was not yet such frame (first input frame). zoom Last calculated zoom from ’z’ expression for current input frame. pzoom Last calculated zoom of last output frame of previous input frame. duration Number of output frames for current input frame. Calculated from ’d’ expression for each input frame. pduration number of output frames created for previous input frame a Rational number: input width / input height sar sample aspect ratio dar display aspect ratio #### 39.288.1 Examples * Zoom in up to 1.5x and pan at same time to some spot near center of picture: zoompan=z='min(zoom+0.0015,1.5)':d=700:x='if(gte(zoom,1.5),x,x+1/a)':y='if(gte(zoom,1.5),y,y+1)':s=640x360 * Zoom in up to 1.5x and pan always at center of picture: zoompan=z='min(zoom+0.0015,1.5)':d=700:x='iw/2-(iw/zoom/2)':y='ih/2-(ih/zoom/2)' * Same as above but without pausing: zoompan=z='min(max(zoom,pzoom)+0.0015,1.5)':d=1:x='iw/2-(iw/zoom/2)':y='ih/2-(ih/zoom/2)' * Zoom in 2x into center of picture only for the first second of the input video: zoompan=z='if(between(in\_time,0,1),2,1)':d=1:x='iw/2-(iw/zoom/2)':y='ih/2-(ih/zoom/2)' ### 39.289 zscale Scale (resize) the input video, using the z.lib library: https://github.com/sekrit-twc/zimg. To enable compilation of this filter, you need to configure FFmpeg with `--enable-libzimg`. The zscale filter forces the output display aspect ratio to be the same as the input, by changing the output sample aspect ratio. If the input image format is different from the format requested by the next filter, the zscale filter will convert the input to the requested format. #### 39.289.1 Options The filter accepts the following options. width, w height, h Set the output video dimension expression. Default value is the input dimension. If the width or w value is 0, the input width is used for the output. If the height or h value is 0, the input height is used for the output. If one and only one of the values is -n with n >= 1, the zscale filter will use a value that maintains the aspect ratio of the input image, calculated from the other specified dimension. After that it will, however, make sure that the calculated dimension is divisible by n and adjust the value if necessary. If both values are -n with n >= 1, the behavior will be identical to both values being set to 0 as previously detailed. See below for the list of accepted constants for use in the dimension expression. size, s Set the video size. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. dither, d Set the dither type. Possible values are: none ordered random error\_diffusion Default is none. filter, f Set the resize filter type. Possible values are: point bilinear bicubic spline16 spline36 lanczos Default is bilinear. range, r Set the color range. Possible values are: input limited full Default is same as input. primaries, p Set the color primaries. Possible values are: input 709 unspecified 170m 240m 2020 Default is same as input. transfer, t Set the transfer characteristics. Possible values are: input 709 unspecified 601 linear 2020\_10 2020\_12 smpte2084 iec61966-2-1 arib-std-b67 Default is same as input. matrix, m Set the colorspace matrix. Possible value are: input 709 unspecified 470bg 170m 2020\_ncl 2020\_cl Default is same as input. rangein, rin Set the input color range. Possible values are: input limited full Default is same as input. primariesin, pin Set the input color primaries. Possible values are: input 709 unspecified 170m 240m 2020 Default is same as input. transferin, tin Set the input transfer characteristics. Possible values are: input 709 unspecified 601 linear 2020\_10 2020\_12 Default is same as input. matrixin, min Set the input colorspace matrix. Possible value are: input 709 unspecified 470bg 170m 2020\_ncl 2020\_cl chromal, c Set the output chroma location. Possible values are: input left center topleft top bottomleft bottom chromalin, cin Set the input chroma location. Possible values are: input left center topleft top bottomleft bottom npl Set the nominal peak luminance. param\_a Parameter A for scaling filters. Parameter "b" for bicubic, and the number of filter taps for lanczos. param\_b Parameter B for scaling filters. Parameter "c" for bicubic. The values of the w and h options are expressions containing the following constants: in\_w in\_h The input width and height iw ih These are the same as in\_w and in\_h. out\_w out\_h The output (scaled) width and height ow oh These are the same as out\_w and out\_h a The same as iw / ih sar input sample aspect ratio dar The input display aspect ratio. Calculated from `(iw / ih) * sar`. hsub vsub horizontal and vertical input chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. ohsub ovsub horizontal and vertical output chroma subsample values. For example for the pixel format "yuv422p" hsub is 2 and vsub is 1. #### 39.289.2 Commands This filter supports the following commands: width, w height, h Set the output video dimension expression. The command accepts the same syntax of the corresponding option. If the specified expression is not valid, it is kept at its current value. ## 40 CUDA Video Filters To enable CUDA and/or NPP filters please refer to configuration guidelines for CUDA and for CUDA NPP filters. Running CUDA filters requires you to initialize a hardware device and to pass that device to all filters in any filter graph. \-init\_hw\_device cuda\[=name\]\[:device\[,key=value...\]\] Initialise a new hardware device of type cuda called name, using the given device parameters. \-filter\_hw\_device name Pass the hardware device called name to all filters in any filter graph. For more detailed information see https://www.ffmpeg.org/ffmpeg.html#Advanced-Video-options * Example of initializing second CUDA device on the system and running scale\_cuda and bilateral\_cuda filters. ./ffmpeg -hwaccel cuda -hwaccel\_output\_format cuda -i input.mp4 -init\_hw\_device cuda:1 -filter\_complex \\ "\[0:v\]scale\_cuda=format=yuv444p\[scaled\_video\];\[scaled\_video\]bilateral\_cuda=window\_size=9:sigmaS=3.0:sigmaR=50.0" \\ -an -sn -c:v h264\_nvenc -cq 20 out.mp4 Since CUDA filters operate exclusively on GPU memory, frame data must sometimes be uploaded (hwupload) to hardware surfaces associated with the appropriate CUDA device before processing, and downloaded (hwdownload) back to normal memory afterward, if required. Whether hwupload or hwdownload is necessary depends on the specific workflow: * If the input frames are already in GPU memory (e.g., when using `-hwaccel cuda` or `-hwaccel_output_format cuda`), explicit use of hwupload is not needed, as the data is already in the appropriate memory space. * If the input frames are in CPU memory (e.g., software-decoded frames or frames processed by CPU-based filters), it is necessary to use hwupload to transfer the data to GPU memory for CUDA processing. * If the output of the CUDA filters needs to be further processed by software-based filters or saved in a format not supported by GPU-based encoders, hwdownload is required to transfer the data back to CPU memory. Note that hwupload uploads data to a surface with the same layout as the software frame, so it may be necessary to add a format filter immediately before hwupload to ensure the input is in the correct format. Similarly, hwdownload may not support all output formats, so an additional format filter may need to be inserted immediately after hwdownload in the filter graph to ensure compatibility. ### 40.1 CUDA Below is a description of the currently available Nvidia CUDA video filters. Prerequisites: * Install Nvidia CUDA Toolkit Note: If FFmpeg detects the Nvidia CUDA Toolkit during configuration, it will enable CUDA filters automatically without requiring any additional flags. If you want to explicitly enable them, use the following options: * Configure FFmpeg with `--enable-cuda-nvcc --enable-nonfree`. * Configure FFmpeg with `--enable-cuda-llvm`. Additional requirement: `llvm` lib must be installed. #### 40.1.1 bilateral\_cuda CUDA accelerated bilateral filter, an edge preserving filter. This filter is mathematically accurate thanks to the use of GPU acceleration. For best output quality, use one to one chroma subsampling, i.e. yuv444p format. The filter accepts the following options: sigmaS Set sigma of gaussian function to calculate spatial weight, also called sigma space. Allowed range is 0.1 to 512. Default is 0.1. sigmaR Set sigma of gaussian function to calculate color range weight, also called sigma color. Allowed range is 0.1 to 512. Default is 0.1. window\_size Set window size of the bilateral function to determine the number of neighbours to loop on. If the number entered is even, one will be added automatically. Allowed range is 1 to 255. Default is 1. #### 40.1.1.1 Examples * Apply the bilateral filter on a video. ./ffmpeg -v verbose \\ -hwaccel cuda -hwaccel\_output\_format cuda -i input.mp4 \\ -init\_hw\_device cuda \\ -filter\_complex \\ " \\ \[0:v\]scale\_cuda=format=yuv444p\[scaled\_video\]; \[scaled\_video\]bilateral\_cuda=window\_size=9:sigmaS=3.0:sigmaR=50.0" \\ -an -sn -c:v h264\_nvenc -cq 20 out.mp4 #### 40.1.2 bwdif\_cuda Deinterlace the input video using the bwdif algorithm, but implemented in CUDA so that it can work as part of a GPU accelerated pipeline with nvdec and/or nvenc. It accepts the following parameters: mode The interlacing mode to adopt. It accepts one of the following values: 0, send\_frame Output one frame for each frame. 1, send\_field Output one frame for each field. The default value is `send_field`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: 0, tff Assume the top field is first. 1, bff Assume the bottom field is first. \-1, auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: 0, all Deinterlace all frames. 1, interlaced Only deinterlace frames marked as interlaced. The default value is `all`. #### 40.1.3 chromakey\_cuda CUDA accelerated YUV colorspace color/chroma keying. This filter works like normal chromakey filter but operates on CUDA frames. for more details and parameters see chromakey. #### 40.1.3.1 Examples * Make all the green pixels in the input video transparent and use it as an overlay for another video: ./ffmpeg \\ -hwaccel cuda -hwaccel\_output\_format cuda -i input\_green.mp4 \\ -hwaccel cuda -hwaccel\_output\_format cuda -i base\_video.mp4 \\ -init\_hw\_device cuda \\ -filter\_complex \\ " \\ \[0:v\]chromakey\_cuda=0x25302D:0.1:0.12:1\[overlay\_video\]; \\ \[1:v\]scale\_cuda=format=yuv420p\[base\]; \\ \[base\]\[overlay\_video\]overlay\_cuda" \\ -an -sn -c:v h264\_nvenc -cq 20 output.mp4 * Process two software sources, explicitly uploading the frames: ./ffmpeg -init\_hw\_device cuda=cuda -filter\_hw\_device cuda \\ -f lavfi -i color=size=800x600:color=white,format=yuv420p \\ -f lavfi -i yuvtestsrc=size=200x200,format=yuv420p \\ -filter\_complex \\ " \\ \[0\]hwupload\[under\]; \\ \[1\]hwupload,chromakey\_cuda=green:0.1:0.12\[over\]; \\ \[under\]\[over\]overlay\_cuda" \\ -c:v hevc\_nvenc -cq 18 -preset slow output.mp4 #### 40.1.4 colorspace\_cuda CUDA accelerated implementation of the colorspace filter. It is by no means feature complete compared to the software colorspace filter, and at the current time only supports color range conversion between jpeg/full and mpeg/limited range. The filter accepts the following options: range Specify output color range. The accepted values are: ‘tv’ TV (restricted) range ‘mpeg’ MPEG (restricted) range ‘pc’ PC (full) range ‘jpeg’ JPEG (full) range #### 40.1.5 overlay\_cuda Overlay one video on top of another. This is the CUDA variant of the overlay filter. It only accepts CUDA frames. The underlying input pixel formats have to match. It takes two inputs and has one output. The first input is the "main" video on which the second input is overlaid. It accepts the following parameters: x y Set expressions for the x and y coordinates of the overlaid video on the main video. They can contain the following parameters: main\_w, W main\_h, H The main input width and height. overlay\_w, w overlay\_h, h The overlay input width and height. x y The computed values for x and y. They are evaluated for each new frame. n The ordinal index of the main input frame, starting from 0. pos The byte offset position in the file of the main input frame, NAN if unknown. Deprecated, do not use. t The timestamp of the main input frame, expressed in seconds, NAN if unknown. Default value is "0" for both expressions. eval Set when the expressions for x and y are evaluated. It accepts the following values: init Evaluate expressions once during filter initialization or when a command is processed. frame Evaluate expressions for each incoming frame Default value is frame. eof\_action See framesync. shortest See framesync. repeatlast See framesync. This filter also supports the framesync options. #### 40.1.6 scale\_cuda Scale (resize) and convert (pixel format) the input video, using accelerated CUDA kernels. Setting the output width and height works in the same way as for the scale filter. The filter accepts the following options: w h Set the output video dimension expression. Default value is the input dimension. Allows for the same expressions as the scale filter. interp\_algo Sets the algorithm used for scaling: nearest Nearest neighbour Used by default if input parameters match the desired output. bilinear Bilinear bicubic Bicubic This is the default. lanczos Lanczos format Controls the output pixel format. By default, or if none is specified, the input pixel format is used. The filter does not support converting between YUV and RGB pixel formats. passthrough If set to 0, every frame is processed, even if no conversion is necessary. This mode can be useful to use the filter as a buffer for a downstream frame-consumer that exhausts the limited decoder frame pool. If set to 1, frames are passed through as-is if they match the desired output parameters. This is the default behaviour. param Algorithm-Specific parameter. Affects the curves of the bicubic algorithm. force\_original\_aspect\_ratio force\_divisible\_by Work the same as the identical scale filter options. reset\_sar Works the same as the identical scale filter option. #### 40.1.6.1 Examples * Scale input to 720p, keeping aspect ratio and ensuring the output is yuv420p. scale\_cuda=-2:720:format=yuv420p * Upscale to 4K using nearest neighbour algorithm. scale\_cuda=4096:2160:interp\_algo=nearest * Don’t do any conversion or scaling, but copy all input frames into newly allocated ones. This can be useful to deal with a filter and encode chain that otherwise exhausts the decoders frame pool. scale\_cuda=passthrough=0 #### 40.1.7 thumbnail\_cuda Select the most representative frame in a given sequence of consecutive frames using CUDA. The filter accepts the following options: n Set the frames batch size to analyze; in a set of n frames, the filter will pick one of them, and then handle the next batch of n frames until the end. Default is `100`. Since the filter keeps track of the whole frames sequence, a bigger n value will result in a higher memory usage, so a high value is not recommended. #### 40.1.7.1 Example * Thumbnails are extracted from every n\=150-frame batch, selecting one per batch. Chosen frames are then scaled with scale\_cuda. ./ffmpeg -hwaccel cuda -hwaccel\_output\_format cuda -i ./input.mp4 -vf "thumbnail\_cuda=150,scale\_cuda=1920:1080,hwdownload,format=nv12" ./output/out%03d.png #### 40.1.8 yadif\_cuda Deinterlace the input video using the yadif algorithm, but implemented in CUDA so that it can work as part of a GPU accelerated pipeline with nvdec and/or nvenc. It accepts the following parameters: mode The interlacing mode to adopt. It accepts one of the following values: 0, send\_frame Output one frame for each frame. 1, send\_field Output one frame for each field. 2, send\_frame\_nospatial Like `send_frame`, but it skips the spatial interlacing check. 3, send\_field\_nospatial Like `send_field`, but it skips the spatial interlacing check. The default value is `send_frame`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: 0, tff Assume the top field is first. 1, bff Assume the bottom field is first. \-1, auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: 0, all Deinterlace all frames. 1, interlaced Only deinterlace frames marked as interlaced. The default value is `all`. ### 40.2 CUDA NPP Below is a description of the currently available NVIDIA Performance Primitives (libnpp) video filters. Prerequisites: * Install Nvidia CUDA Toolkit * Install libnpp To enable CUDA NPP filters: * Configure FFmpeg with `--enable-nonfree --enable-libnpp`. #### 40.2.1 scale\_npp Use the NVIDIA Performance Primitives (libnpp) to perform scaling and/or pixel format conversion on CUDA video frames. Setting the output width and height works in the same way as for the scale filter. The following additional options are accepted: format The pixel format of the output CUDA frames. If set to the string "same" (the default), the input format will be kept. Note that automatic format negotiation and conversion is not yet supported for hardware frames interp\_algo The interpolation algorithm used for resizing. One of the following: nn Nearest neighbour. linear cubic cubic2p\_bspline 2-parameter cubic (B=1, C=0) cubic2p\_catmullrom 2-parameter cubic (B=0, C=1/2) cubic2p\_b05c03 2-parameter cubic (B=1/2, C=3/10) super Supersampling lanczos force\_original\_aspect\_ratio Enable decreasing or increasing output video width or height if necessary to keep the original aspect ratio. Possible values: ‘disable’ Scale the video as specified and disable this feature. ‘decrease’ The output video dimensions will automatically be decreased if needed. ‘increase’ The output video dimensions will automatically be increased if needed. One useful instance of this option is that when you know a specific device’s maximum allowed resolution, you can use this to limit the output video to that, while retaining the aspect ratio. For example, device A allows 1280x720 playback, and your video is 1920x800. Using this option (set it to decrease) and specifying 1280x720 to the command line makes the output 1280x533. Please note that this is a different thing than specifying -1 for w or h, you still need to specify the output resolution for this option to work. force\_divisible\_by Ensures that both the output dimensions, width and height, are divisible by the given integer when used together with force\_original\_aspect\_ratio. This works similar to using `-n` in the w and h options. This option respects the value set for force\_original\_aspect\_ratio, increasing or decreasing the resolution accordingly. The video’s aspect ratio may be slightly modified. This option can be handy if you need to have a video fit within or exceed a defined resolution using force\_original\_aspect\_ratio but also have encoder restrictions on width or height divisibility. reset\_sar Works the same as the identical scale filter option. eval Specify when to evaluate width and height expression. It accepts the following values: ‘init’ Only evaluate expressions once during the filter initialization or when a command is processed. ‘frame’ Evaluate expressions for each incoming frame. The values of the w and h options are expressions containing the following constants: in\_w in\_h The input width and height iw ih These are the same as in\_w and in\_h. out\_w out\_h The output (scaled) width and height ow oh These are the same as out\_w and out\_h a The same as iw / ih sar input sample aspect ratio dar The input display aspect ratio. Calculated from `(iw / ih) * sar`. n The (sequential) number of the input frame, starting from 0. Only available with `eval=frame`. t The presentation timestamp of the input frame, expressed as a number of seconds. Only available with `eval=frame`. pos The position (byte offset) of the frame in the input stream, or NaN if this information is unavailable and/or meaningless (for example in case of synthetic video). Only available with `eval=frame`. Deprecated, do not use. #### 40.2.2 scale2ref\_npp Use the NVIDIA Performance Primitives (libnpp) to scale (resize) the input video, based on a reference video. See the scale\_npp filter for available options, scale2ref\_npp supports the same but uses the reference video instead of the main input as basis. scale2ref\_npp also supports the following additional constants for the w and h options: main\_w main\_h The main input video’s width and height main\_a The same as main\_w / main\_h main\_sar The main input video’s sample aspect ratio main\_dar, mdar The main input video’s display aspect ratio. Calculated from `(main_w / main_h) * main_sar`. main\_n The (sequential) number of the main input frame, starting from 0. Only available with `eval=frame`. main\_t The presentation timestamp of the main input frame, expressed as a number of seconds. Only available with `eval=frame`. main\_pos The position (byte offset) of the frame in the main input stream, or NaN if this information is unavailable and/or meaningless (for example in case of synthetic video). Only available with `eval=frame`. #### 40.2.2.1 Examples * Scale a subtitle stream (b) to match the main video (a) in size before overlaying 'scale2ref\_npp\[b\]\[a\];\[a\]\[b\]overlay\_cuda' * Scale a logo to 1/10th the height of a video, while preserving its display aspect ratio. \[logo-in\]\[video-in\]scale2ref\_npp=w=oh\*mdar:h=ih/10\[logo-out\]\[video-out\] #### 40.2.3 sharpen\_npp Use the NVIDIA Performance Primitives (libnpp) to perform image sharpening with border control. The following additional options are accepted: border\_type Type of sampling to be used ad frame borders. One of the following: replicate Replicate pixel values. #### 40.2.4 transpose\_npp Transpose rows with columns in the input video and optionally flip it. For more in depth examples see the transpose video filter, which shares mostly the same options. It accepts the following parameters: dir Specify the transposition direction. Can assume the following values: ‘cclock\_flip’ Rotate by 90 degrees counterclockwise and vertically flip. (default) ‘clock’ Rotate by 90 degrees clockwise. ‘cclock’ Rotate by 90 degrees counterclockwise. ‘clock\_flip’ Rotate by 90 degrees clockwise and vertically flip. passthrough Do not apply the transposition if the input geometry matches the one specified by the specified value. It accepts the following values: ‘none’ Always apply transposition. (default) ‘portrait’ Preserve portrait geometry (when height >= width). ‘landscape’ Preserve landscape geometry (when width >= height). ## 41 OpenCL Video Filters Below is a description of the currently available OpenCL video filters. To enable compilation of these filters you need to configure FFmpeg with `--enable-opencl`. Running OpenCL filters requires you to initialize a hardware device and to pass that device to all filters in any filter graph. \-init\_hw\_device opencl\[=name\]\[:device\[,key=value...\]\] Initialise a new hardware device of type opencl called name, using the given device parameters. \-filter\_hw\_device name Pass the hardware device called name to all filters in any filter graph. For more detailed information see https://www.ffmpeg.org/ffmpeg.html#Advanced-Video-options * Example of choosing the first device on the second platform and running avgblur\_opencl filter with default parameters on it. \-init\_hw\_device opencl=gpu:1.0 -filter\_hw\_device gpu -i INPUT -vf "hwupload, avgblur\_opencl, hwdownload" OUTPUT Since OpenCL filters are not able to access frame data in normal memory, all frame data needs to be uploaded(hwupload) to hardware surfaces connected to the appropriate device before being used and then downloaded(hwdownload) back to normal memory. Note that hwupload will upload to a surface with the same layout as the software frame, so it may be necessary to add a format filter immediately before to get the input into the right format and hwdownload does not support all formats on the output - it may be necessary to insert an additional format filter immediately following in the graph to get the output in a supported format. ### 41.1 avgblur\_opencl Apply average blur filter. The filter accepts the following options: sizeX Set horizontal radius size. Range is `[1, 1024]` and default value is `1`. planes Set which planes to filter. Default value is `0xf`, by which all planes are processed. sizeY Set vertical radius size. Range is `[1, 1024]` and default value is `0`. If zero, `sizeX` value will be used. #### 41.1.1 Example * Apply average blur filter with horizontal and vertical size of 3, setting each pixel of the output to the average value of the 7x7 region centered on it in the input. For pixels on the edges of the image, the region does not extend beyond the image boundaries, and so out-of-range coordinates are not used in the calculations. \-i INPUT -vf "hwupload, avgblur\_opencl=3, hwdownload" OUTPUT ### 41.2 boxblur\_opencl Apply a boxblur algorithm to the input video. It accepts the following parameters: luma\_radius, lr luma\_power, lp chroma\_radius, cr chroma\_power, cp alpha\_radius, ar alpha\_power, ap A description of the accepted options follows. luma\_radius, lr chroma\_radius, cr alpha\_radius, ar Set an expression for the box radius in pixels used for blurring the corresponding input plane. The radius value must be a non-negative number, and must not be greater than the value of the expression `min(w,h)/2` for the luma and alpha planes, and of `min(cw,ch)/2` for the chroma planes. Default value for luma\_radius is "2". If not specified, chroma\_radius and alpha\_radius default to the corresponding value set for luma\_radius. The expressions can contain the following constants: w h The input width and height in pixels. cw ch The input chroma image width and height in pixels. hsub vsub The horizontal and vertical chroma subsample values. For example, for the pixel format "yuv422p", hsub is 2 and vsub is 1. luma\_power, lp chroma\_power, cp alpha\_power, ap Specify how many times the boxblur filter is applied to the corresponding plane. Default value for luma\_power is 2. If not specified, chroma\_power and alpha\_power default to the corresponding value set for luma\_power. A value of 0 will disable the effect. #### 41.2.1 Examples Apply boxblur filter, setting each pixel of the output to the average value of box-radiuses luma\_radius, chroma\_radius, alpha\_radius for each plane respectively. The filter will apply luma\_power, chroma\_power, alpha\_power times onto the corresponding plane. For pixels on the edges of the image, the radius does not extend beyond the image boundaries, and so out-of-range coordinates are not used in the calculations. * Apply a boxblur filter with the luma, chroma, and alpha radius set to 2 and luma, chroma, and alpha power set to 3. The filter will run 3 times with box-radius set to 2 for every plane of the image. \-i INPUT -vf "hwupload, boxblur\_opencl=luma\_radius=2:luma\_power=3, hwdownload" OUTPUT -i INPUT -vf "hwupload, boxblur\_opencl=2:3, hwdownload" OUTPUT * Apply a boxblur filter with luma radius set to 2, luma\_power to 1, chroma\_radius to 4, chroma\_power to 5, alpha\_radius to 3 and alpha\_power to 7. For the luma plane, a 2x2 box radius will be run once. For the chroma plane, a 4x4 box radius will be run 5 times. For the alpha plane, a 3x3 box radius will be run 7 times. \-i INPUT -vf "hwupload, boxblur\_opencl=2:1:4:5:3:7, hwdownload" OUTPUT ### 41.3 colorkey\_opencl RGB colorspace color keying. The filter accepts the following options: color The color which will be replaced with transparency. similarity Similarity percentage with the key color. 0.01 matches only the exact key color, while 1.0 matches everything. blend Blend percentage. 0.0 makes pixels either fully transparent, or not transparent at all. Higher values result in semi-transparent pixels, with a higher transparency the more similar the pixels color is to the key color. #### 41.3.1 Examples * Make every semi-green pixel in the input transparent with some slight blending: \-i INPUT -vf "hwupload, colorkey\_opencl=green:0.3:0.1, hwdownload" OUTPUT ### 41.4 convolution\_opencl Apply convolution of 3x3, 5x5, 7x7 matrix. The filter accepts the following options: 0m 1m 2m 3m Set matrix for each plane. Matrix is sequence of 9, 25 or 49 signed numbers. Default value for each plane is `0 0 0 0 1 0 0 0 0`. 0rdiv 1rdiv 2rdiv 3rdiv Set multiplier for calculated value for each plane. If unset or 0, it will be sum of all matrix elements. The option value must be a float number greater or equal to `0.0`. Default value is `1.0`. 0bias 1bias 2bias 3bias Set bias for each plane. This value is added to the result of the multiplication. Useful for making the overall image brighter or darker. The option value must be a float number greater or equal to `0.0`. Default value is `0.0`. #### 41.4.1 Examples * Apply sharpen: \-i INPUT -vf "hwupload, convolution\_opencl=0 -1 0 -1 5 -1 0 -1 0:0 -1 0 -1 5 -1 0 -1 0:0 -1 0 -1 5 -1 0 -1 0:0 -1 0 -1 5 -1 0 -1 0, hwdownload" OUTPUT * Apply blur: \-i INPUT -vf "hwupload, convolution\_opencl=1 1 1 1 1 1 1 1 1:1 1 1 1 1 1 1 1 1:1 1 1 1 1 1 1 1 1:1 1 1 1 1 1 1 1 1:1/9:1/9:1/9:1/9, hwdownload" OUTPUT * Apply edge enhance: \-i INPUT -vf "hwupload, convolution\_opencl=0 0 0 -1 1 0 0 0 0:0 0 0 -1 1 0 0 0 0:0 0 0 -1 1 0 0 0 0:0 0 0 -1 1 0 0 0 0:5:1:1:1:0:128:128:128, hwdownload" OUTPUT * Apply edge detect: \-i INPUT -vf "hwupload, convolution\_opencl=0 1 0 1 -4 1 0 1 0:0 1 0 1 -4 1 0 1 0:0 1 0 1 -4 1 0 1 0:0 1 0 1 -4 1 0 1 0:5:5:5:1:0:128:128:128, hwdownload" OUTPUT * Apply laplacian edge detector which includes diagonals: \-i INPUT -vf "hwupload, convolution\_opencl=1 1 1 1 -8 1 1 1 1:1 1 1 1 -8 1 1 1 1:1 1 1 1 -8 1 1 1 1:1 1 1 1 -8 1 1 1 1:5:5:5:1:0:128:128:0, hwdownload" OUTPUT * Apply emboss: \-i INPUT -vf "hwupload, convolution\_opencl=-2 -1 0 -1 1 1 0 1 2:-2 -1 0 -1 1 1 0 1 2:-2 -1 0 -1 1 1 0 1 2:-2 -1 0 -1 1 1 0 1 2, hwdownload" OUTPUT ### 41.5 erosion\_opencl Apply erosion effect to the video. This filter replaces the pixel by the local(3x3) minimum. It accepts the following options: threshold0 threshold1 threshold2 threshold3 Limit the maximum change for each plane. Range is `[0, 65535]` and default value is `65535`. If `0`, plane will remain unchanged. coordinates Flag which specifies the pixel to refer to. Range is `[0, 255]` and default value is `255`, i.e. all eight pixels are used. Flags to local 3x3 coordinates region centered on `x`: 1 2 3 4 x 5 6 7 8 #### 41.5.1 Example * Apply erosion filter with threshold0 set to 30, threshold1 set 40, threshold2 set to 50 and coordinates set to 231, setting each pixel of the output to the local minimum between pixels: 1, 2, 3, 6, 7, 8 of the 3x3 region centered on it in the input. If the difference between input pixel and local minimum is more then threshold of the corresponding plane, output pixel will be set to input pixel - threshold of corresponding plane. \-i INPUT -vf "hwupload, erosion\_opencl=30:40:50:coordinates=231, hwdownload" OUTPUT ### 41.6 deshake\_opencl Feature-point based video stabilization filter. The filter accepts the following options: tripod Simulates a tripod by preventing any camera movement whatsoever from the original frame. Defaults to `0`. debug Whether or not additional debug info should be displayed, both in the processed output and in the console. Note that in order to see console debug output you will also need to pass `-v verbose` to ffmpeg. Viewing point matches in the output video is only supported for RGB input. Defaults to `0`. adaptive\_crop Whether or not to do a tiny bit of cropping at the borders to cut down on the amount of mirrored pixels. Defaults to `1`. refine\_features Whether or not feature points should be refined at a sub-pixel level. This can be turned off for a slight performance gain at the cost of precision. Defaults to `1`. smooth\_strength The strength of the smoothing applied to the camera path from `0.0` to `1.0`. `1.0` is the maximum smoothing strength while values less than that result in less smoothing. `0.0` causes the filter to adaptively choose a smoothing strength on a per-frame basis. Defaults to `0.0`. smooth\_window\_multiplier Controls the size of the smoothing window (the number of frames buffered to determine motion information from). The size of the smoothing window is determined by multiplying the framerate of the video by this number. Acceptable values range from `0.1` to `10.0`. Larger values increase the amount of motion data available for determining how to smooth the camera path, potentially improving smoothness, but also increase latency and memory usage. Defaults to `2.0`. #### 41.6.1 Examples * Stabilize a video with a fixed, medium smoothing strength: \-i INPUT -vf "hwupload, deshake\_opencl=smooth\_strength=0.5, hwdownload" OUTPUT * Stabilize a video with debugging (both in console and in rendered video): \-i INPUT -filter\_complex "\[0:v\]format=rgba, hwupload, deshake\_opencl=debug=1, hwdownload, format=rgba, format=yuv420p" -v verbose OUTPUT ### 41.7 dilation\_opencl Apply dilation effect to the video. This filter replaces the pixel by the local(3x3) maximum. It accepts the following options: threshold0 threshold1 threshold2 threshold3 Limit the maximum change for each plane. Range is `[0, 65535]` and default value is `65535`. If `0`, plane will remain unchanged. coordinates Flag which specifies the pixel to refer to. Range is `[0, 255]` and default value is `255`, i.e. all eight pixels are used. Flags to local 3x3 coordinates region centered on `x`: 1 2 3 4 x 5 6 7 8 #### 41.7.1 Example * Apply dilation filter with threshold0 set to 30, threshold1 set 40, threshold2 set to 50 and coordinates set to 231, setting each pixel of the output to the local maximum between pixels: 1, 2, 3, 6, 7, 8 of the 3x3 region centered on it in the input. If the difference between input pixel and local maximum is more then threshold of the corresponding plane, output pixel will be set to input pixel + threshold of corresponding plane. \-i INPUT -vf "hwupload, dilation\_opencl=30:40:50:coordinates=231, hwdownload" OUTPUT ### 41.8 nlmeans\_opencl Non-local Means denoise filter through OpenCL, this filter accepts same options as nlmeans. ### 41.9 overlay\_opencl Overlay one video on top of another. It takes two inputs and has one output. The first input is the "main" video on which the second input is overlaid. This filter requires same memory layout for all the inputs. So, format conversion may be needed. The filter accepts the following options: x Set the x coordinate of the overlaid video on the main video. Default value is `0`. y Set the y coordinate of the overlaid video on the main video. Default value is `0`. #### 41.9.1 Examples * Overlay an image LOGO at the top-left corner of the INPUT video. Both inputs are yuv420p format. \-i INPUT -i LOGO -filter\_complex "\[0:v\]hwupload\[a\], \[1:v\]format=yuv420p, hwupload\[b\], \[a\]\[b\]overlay\_opencl, hwdownload" OUTPUT * The inputs have same memory layout for color channels , the overlay has additional alpha plane, like INPUT is yuv420p, and the LOGO is yuva420p. \-i INPUT -i LOGO -filter\_complex "\[0:v\]hwupload\[a\], \[1:v\]format=yuva420p, hwupload\[b\], \[a\]\[b\]overlay\_opencl, hwdownload" OUTPUT ### 41.10 pad\_opencl Add paddings to the input image, and place the original input at the provided x, y coordinates. It accepts the following options: width, w height, h Specify an expression for the size of the output image with the paddings added. If the value for width or height is 0, the corresponding input size is used for the output. The width expression can reference the value set by the height expression, and vice versa. The default value of width and height is 0. x y Specify the offsets to place the input image at within the padded area, with respect to the top/left border of the output image. The x expression can reference the value set by the y expression, and vice versa. The default value of x and y is 0. If x or y evaluate to a negative number, they’ll be changed so the input image is centered on the padded area. color Specify the color of the padded area. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. aspect Pad to an aspect instead to a resolution. The value for the width, height, x, and y options are expressions containing the following constants: in\_w in\_h The input video width and height. iw ih These are the same as in\_w and in\_h. out\_w out\_h The output width and height (the size of the padded area), as specified by the width and height expressions. ow oh These are the same as out\_w and out\_h. x y The x and y offsets as specified by the x and y expressions, or NAN if not yet specified. a same as iw / ih sar input sample aspect ratio dar input display aspect ratio, it is the same as (iw / ih) \* sar ### 41.11 prewitt\_opencl Apply the Prewitt operator (https://en.wikipedia.org/wiki/Prewitt\_operator) to input video stream. The filter accepts the following option: planes Set which planes to filter. Default value is `0xf`, by which all planes are processed. scale Set value which will be multiplied with filtered result. Range is `[0.0, 65535]` and default value is `1.0`. delta Set value which will be added to filtered result. Range is `[-65535, 65535]` and default value is `0.0`. #### 41.11.1 Example * Apply the Prewitt operator with scale set to 2 and delta set to 10. \-i INPUT -vf "hwupload, prewitt\_opencl=scale=2:delta=10, hwdownload" OUTPUT ### 41.12 program\_opencl Filter video using an OpenCL program. source OpenCL program source file. kernel Kernel name in program. inputs Number of inputs to the filter. Defaults to 1. size, s Size of output frames. Defaults to the same as the first input. The `program_opencl` filter also supports the framesync options. The program source file must contain a kernel function with the given name, which will be run once for each plane of the output. Each run on a plane gets enqueued as a separate 2D global NDRange with one work-item for each pixel to be generated. The global ID offset for each work-item is therefore the coordinates of a pixel in the destination image. The kernel function needs to take the following arguments: * Destination image, \_\_write\_only image2d\_t. This image will become the output; the kernel should write all of it. * Frame index, unsigned int. This is a counter starting from zero and increasing by one for each frame. * Source images, \_\_read\_only image2d\_t. These are the most recent images on each input. The kernel may read from them to generate the output, but they can’t be written to. Example programs: * Copy the input to the output (output must be the same size as the input). \_\_kernel void copy(\_\_write\_only image2d\_t destination, unsigned int index, \_\_read\_only image2d\_t source) { const sampler\_t sampler = CLK\_NORMALIZED\_COORDS\_FALSE; int2 location = (int2)(get\_global\_id(0), get\_global\_id(1)); float4 value = read\_imagef(source, sampler, location); write\_imagef(destination, location, value); } * Apply a simple transformation, rotating the input by an amount increasing with the index counter. Pixel values are linearly interpolated by the sampler, and the output need not have the same dimensions as the input. \_\_kernel void rotate\_image(\_\_write\_only image2d\_t dst, unsigned int index, \_\_read\_only image2d\_t src) { const sampler\_t sampler = (CLK\_NORMALIZED\_COORDS\_FALSE | CLK\_FILTER\_LINEAR); float angle = (float)index / 100.0f; float2 dst\_dim = convert\_float2(get\_image\_dim(dst)); float2 src\_dim = convert\_float2(get\_image\_dim(src)); float2 dst\_cen = dst\_dim / 2.0f; float2 src\_cen = src\_dim / 2.0f; int2 dst\_loc = (int2)(get\_global\_id(0), get\_global\_id(1)); float2 dst\_pos = convert\_float2(dst\_loc) - dst\_cen; float2 src\_pos = { cos(angle) \* dst\_pos.x - sin(angle) \* dst\_pos.y, sin(angle) \* dst\_pos.x + cos(angle) \* dst\_pos.y }; src\_pos = src\_pos \* src\_dim / dst\_dim; float2 src\_loc = src\_pos + src\_cen; if (src\_loc.x < 0.0f || src\_loc.y < 0.0f || src\_loc.x > src\_dim.x || src\_loc.y > src\_dim.y) write\_imagef(dst, dst\_loc, 0.5f); else write\_imagef(dst, dst\_loc, read\_imagef(src, sampler, src\_loc)); } * Blend two inputs together, with the amount of each input used varying with the index counter. \_\_kernel void blend\_images(\_\_write\_only image2d\_t dst, unsigned int index, \_\_read\_only image2d\_t src1, \_\_read\_only image2d\_t src2) { const sampler\_t sampler = (CLK\_NORMALIZED\_COORDS\_FALSE | CLK\_FILTER\_LINEAR); float blend = (cos((float)index / 50.0f) + 1.0f) / 2.0f; int2 dst\_loc = (int2)(get\_global\_id(0), get\_global\_id(1)); int2 src1\_loc = dst\_loc \* get\_image\_dim(src1) / get\_image\_dim(dst); int2 src2\_loc = dst\_loc \* get\_image\_dim(src2) / get\_image\_dim(dst); float4 val1 = read\_imagef(src1, sampler, src1\_loc); float4 val2 = read\_imagef(src2, sampler, src2\_loc); write\_imagef(dst, dst\_loc, val1 \* blend + val2 \* (1.0f - blend)); } ### 41.13 remap\_opencl Remap pixels using 2nd: Xmap and 3rd: Ymap input video stream. Destination pixel at position (X, Y) will be picked from source (x, y) position where x = Xmap(X, Y) and y = Ymap(X, Y). If mapping values are out of range, zero value for pixel will be used for destination pixel. Xmap and Ymap input video streams must be of same dimensions. Output video stream will have Xmap/Ymap video stream dimensions. Xmap and Ymap input video streams are 32bit float pixel format, single channel. interp Specify interpolation used for remapping of pixels. Allowed values are `near` and `linear`. Default value is `linear`. fill Specify the color of the unmapped pixels. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. Default color is `black`. ### 41.14 roberts\_opencl Apply the Roberts cross operator (https://en.wikipedia.org/wiki/Roberts\_cross) to input video stream. The filter accepts the following option: planes Set which planes to filter. Default value is `0xf`, by which all planes are processed. scale Set value which will be multiplied with filtered result. Range is `[0.0, 65535]` and default value is `1.0`. delta Set value which will be added to filtered result. Range is `[-65535, 65535]` and default value is `0.0`. #### 41.14.1 Example * Apply the Roberts cross operator with scale set to 2 and delta set to 10 \-i INPUT -vf "hwupload, roberts\_opencl=scale=2:delta=10, hwdownload" OUTPUT ### 41.15 sobel\_opencl Apply the Sobel operator (https://en.wikipedia.org/wiki/Sobel\_operator) to input video stream. The filter accepts the following option: planes Set which planes to filter. Default value is `0xf`, by which all planes are processed. scale Set value which will be multiplied with filtered result. Range is `[0.0, 65535]` and default value is `1.0`. delta Set value which will be added to filtered result. Range is `[-65535, 65535]` and default value is `0.0`. #### 41.15.1 Example * Apply sobel operator with scale set to 2 and delta set to 10 \-i INPUT -vf "hwupload, sobel\_opencl=scale=2:delta=10, hwdownload" OUTPUT ### 41.16 tonemap\_opencl Perform HDR(PQ/HLG) to SDR conversion with tone-mapping. It accepts the following parameters: tonemap Specify the tone-mapping operator to be used. Same as tonemap option in tonemap. param Tune the tone mapping algorithm. same as param option in tonemap. desat Apply desaturation for highlights that exceed this level of brightness. The higher the parameter, the more color information will be preserved. This setting helps prevent unnaturally blown-out colors for super-highlights, by (smoothly) turning into white instead. This makes images feel more natural, at the cost of reducing information about out-of-range colors. The default value is 0.5, and the algorithm here is a little different from the cpu version tonemap currently. A setting of 0.0 disables this option. threshold The tonemapping algorithm parameters is fine-tuned per each scene. And a threshold is used to detect whether the scene has changed or not. If the distance between the current frame average brightness and the current running average exceeds a threshold value, we would re-calculate scene average and peak brightness. The default value is 0.2. format Specify the output pixel format. Currently supported formats are: p010 nv12 range, r Set the output color range. Possible values are: tv/mpeg pc/jpeg Default is same as input. primaries, p Set the output color primaries. Possible values are: bt709 bt2020 Default is same as input. transfer, t Set the output transfer characteristics. Possible values are: bt709 bt2020 Default is bt709. matrix, m Set the output colorspace matrix. Possible value are: bt709 bt2020 Default is same as input. #### 41.16.1 Example * Convert HDR(PQ/HLG) video to bt2020-transfer-characteristic p010 format using linear operator. \-i INPUT -vf "format=p010,hwupload,tonemap\_opencl=t=bt2020:tonemap=linear:format=p010,hwdownload,format=p010" OUTPUT ### 41.17 unsharp\_opencl Sharpen or blur the input video. It accepts the following parameters: luma\_msize\_x, lx Set the luma matrix horizontal size. Range is `[1, 23]` and default value is `5`. luma\_msize\_y, ly Set the luma matrix vertical size. Range is `[1, 23]` and default value is `5`. luma\_amount, la Set the luma effect strength. Range is `[-10, 10]` and default value is `1.0`. Negative values will blur the input video, while positive values will sharpen it, a value of zero will disable the effect. chroma\_msize\_x, cx Set the chroma matrix horizontal size. Range is `[1, 23]` and default value is `5`. chroma\_msize\_y, cy Set the chroma matrix vertical size. Range is `[1, 23]` and default value is `5`. chroma\_amount, ca Set the chroma effect strength. Range is `[-10, 10]` and default value is `0.0`. Negative values will blur the input video, while positive values will sharpen it, a value of zero will disable the effect. All parameters are optional and default to the equivalent of the string ’5:5:1.0:5:5:0.0’. #### 41.17.1 Examples * Apply strong luma sharpen effect: \-i INPUT -vf "hwupload, unsharp\_opencl=luma\_msize\_x=7:luma\_msize\_y=7:luma\_amount=2.5, hwdownload" OUTPUT * Apply a strong blur of both luma and chroma parameters: \-i INPUT -vf "hwupload, unsharp\_opencl=7:7:-2:7:7:-2, hwdownload" OUTPUT ### 41.18 xfade\_opencl Cross fade two videos with custom transition effect by using OpenCL. It accepts the following options: transition Set one of possible transition effects. custom Select custom transition effect, the actual transition description will be picked from source and kernel options. fade wipeleft wiperight wipeup wipedown slideleft slideright slideup slidedown Default transition is fade. source OpenCL program source file for custom transition. kernel Set name of kernel to use for custom transition from program source file. duration Set duration of video transition. offset Set time of start of transition relative to first video. The program source file must contain a kernel function with the given name, which will be run once for each plane of the output. Each run on a plane gets enqueued as a separate 2D global NDRange with one work-item for each pixel to be generated. The global ID offset for each work-item is therefore the coordinates of a pixel in the destination image. The kernel function needs to take the following arguments: * Destination image, \_\_write\_only image2d\_t. This image will become the output; the kernel should write all of it. * First Source image, \_\_read\_only image2d\_t. Second Source image, \_\_read\_only image2d\_t. These are the most recent images on each input. The kernel may read from them to generate the output, but they can’t be written to. * Transition progress, float. This value is always between 0 and 1 inclusive. Example programs: * Apply dots curtain transition effect: \_\_kernel void blend\_images(\_\_write\_only image2d\_t dst, \_\_read\_only image2d\_t src1, \_\_read\_only image2d\_t src2, float progress) { const sampler\_t sampler = (CLK\_NORMALIZED\_COORDS\_FALSE | CLK\_FILTER\_LINEAR); int2 p = (int2)(get\_global\_id(0), get\_global\_id(1)); float2 rp = (float2)(get\_global\_id(0), get\_global\_id(1)); float2 dim = (float2)(get\_image\_dim(src1).x, get\_image\_dim(src1).y); rp = rp / dim; float2 dots = (float2)(20.0, 20.0); float2 center = (float2)(0,0); float2 unused; float4 val1 = read\_imagef(src1, sampler, p); float4 val2 = read\_imagef(src2, sampler, p); bool next = distance(fract(rp \* dots, &unused), (float2)(0.5, 0.5)) < (progress / distance(rp, center)); write\_imagef(dst, p, next ? val1 : val2); } ## 42 VAAPI Video Filters VAAPI Video filters are usually used with VAAPI decoder and VAAPI encoder. Below is a description of VAAPI video filters. To enable compilation of these filters you need to configure FFmpeg with `--enable-vaapi`. To use vaapi filters, you need to setup the vaapi device correctly. For more information, please read https://trac.ffmpeg.org/wiki/Hardware/VAAPI ### 42.1 overlay\_vaapi Overlay one video on the top of another. It takes two inputs and has one output. The first input is the "main" video on which the second input is overlaid. The filter accepts the following options: x y Set expressions for the x and y coordinates of the overlaid video on the main video. Default value is "0" for both expressions. w h Set expressions for the width and height the overlaid video on the main video. Default values are ’overlay\_iw’ for ’w’ and ’overlay\_ih\*w/overlay\_iw’ for ’h’. The expressions can contain the following parameters: main\_w, W main\_h, H The main input width and height. overlay\_iw overlay\_ih The overlay input width and height. overlay\_w, w overlay\_h, h The overlay output width and height. overlay\_x, x overlay\_y, y Position of the overlay layer inside of main alpha Set transparency of overlaid video. Allowed range is 0.0 to 1.0. Higher value means lower transparency. Default value is `1.0`. eof\_action See framesync. shortest See framesync. repeatlast See framesync. This filter also supports the framesync options. #### 42.1.1 Examples * Overlay an image LOGO at the top-left corner of the INPUT video. Both inputs for this filter are yuv420p format. \-i INPUT -i LOGO -filter\_complex "\[0:v\]hwupload\[a\], \[1:v\]format=yuv420p, hwupload\[b\], \[a\]\[b\]overlay\_vaapi" OUTPUT * Overlay an image LOGO at the offset (200, 100) from the top-left corner of the INPUT video. The inputs have same memory layout for color channels, the overlay has additional alpha plane, like INPUT is yuv420p, and the LOGO is yuva420p. \-i INPUT -i LOGO -filter\_complex "\[0:v\]hwupload\[a\], \[1:v\]format=yuva420p, hwupload\[b\], \[a\]\[b\]overlay\_vaapi=x=200:y=100:w=400:h=300:alpha=1.0, hwdownload, format=nv12" OUTPUT ### 42.2 tonemap\_vaapi Perform HDR-to-SDR or HDR-to-HDR tone-mapping. It currently only accepts HDR10 as input. It accepts the following parameters: format Specify the output pixel format. Default is nv12 for HDR-to-SDR tone-mapping and p010 for HDR-to-HDR tone-mapping. primaries, p Set the output color primaries. Default is bt709 for HDR-to-SDR tone-mapping and same as input for HDR-to-HDR tone-mapping. transfer, t Set the output transfer characteristics. Default is bt709 for HDR-to-SDR tone-mapping and same as input for HDR-to-HDR tone-mapping. matrix, m Set the output colorspace matrix. Default is bt709 for HDR-to-SDR tone-mapping and same as input for HDR-to-HDR tone-mapping. display Set the output mastering display colour volume. It is given by a ’|’-separated list of two values, two values are space separated. It set display primaries x & y in G, B, R order, then white point x & y, the nominal minimum & maximum display luminances. HDR-to-HDR tone-mapping will be performed when this option is set. light Set the output content light level information. It accepts 2 space-separated values, the first input is the maximum light level and the second input is the maximum average light level. It is ignored for HDR-to-SDR tone-mapping, and optional for HDR-to-HDR tone-mapping. #### 42.2.1 Example * Convert HDR(HDR10) video to bt2020-transfer-characteristic p010 format tonemap\_vaapi=format=p010:t=bt2020-10 * Convert HDR video to HDR video tonemap\_vaapi=display=7500\\ 3000|34000\\ 16000|13250\\ 34500|15635\\ 16450|500\\ 10000000 ### 42.3 hstack\_vaapi Stack input videos horizontally. This is the VA-API variant of the hstack filter, each input stream may have different height, this filter will scale down/up each input stream while keeping the original aspect. It accepts the following options: inputs See hstack. shortest See hstack. height Set height of output. If set to 0, this filter will set height of output to height of the first input stream. Default value is 0. ### 42.4 vstack\_vaapi Stack input videos vertically. This is the VA-API variant of the vstack filter, each input stream may have different width, this filter will scale down/up each input stream while keeping the original aspect. It accepts the following options: inputs See vstack. shortest See vstack. width Set width of output. If set to 0, this filter will set width of output to width of the first input stream. Default value is 0. ### 42.5 xstack\_vaapi Stack video inputs into custom layout. This is the VA-API variant of the xstack filter, each input stream may have different size, this filter will scale down/up each input stream to the given output size, or the size of the first input stream. It accepts the following options: inputs See xstack. shortest See xstack. layout See xstack. Moreover, this permits the user to supply output size for each input stream. xstack\_vaapi=inputs=4:layout=0\_0\_1920x1080|0\_h0\_1920x1080|w0\_0\_1920x1080|w0\_h0\_1920x1080 grid See xstack. grid\_tile\_size Set output size for each input stream when grid is set. If this option is not set, this filter will set output size by default to the size of the first input stream. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. fill See xstack. ### 42.6 pad\_vaapi Add paddings to the input image, and place the original input at the provided x, y coordinates. It accepts the following options: width, w height, h Specify an expression for the size of the output image with the paddings added. If the value for width or height is 0, the corresponding input size is used for the output. The width expression can reference the value set by the height expression, and vice versa. The default value of width and height is 0. x y Specify the offsets to place the input image at within the padded area, with respect to the top/left border of the output image. The x expression can reference the value set by the y expression, and vice versa. The default value of x and y is 0. If x or y evaluate to a negative number, they’ll be changed so the input image is centered on the padded area. color Specify the color of the padded area. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. aspect Pad to an aspect instead to a resolution. The value for the width, height, x, and y options are expressions containing the following constants: in\_w in\_h The input video width and height. iw ih These are the same as in\_w and in\_h. out\_w out\_h The output width and height (the size of the padded area), as specified by the width and height expressions. ow oh These are the same as out\_w and out\_h. x y The x and y offsets as specified by the x and y expressions, or NAN if not yet specified. a same as iw / ih sar input sample aspect ratio dar input display aspect ratio, it is the same as (iw / ih) \* sar ### 42.7 drawbox\_vaapi Draw a colored box on the input image. It accepts the following parameters: x y The expressions which specify the top left corner coordinates of the box. It defaults to 0. width, w height, h The expressions which specify the width and height of the box; if 0 they are interpreted as the input width and height. It defaults to 0. color, c Specify the color of the box to write. For the general syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. thickness, t The expression which sets the thickness of the box edge. A value of `fill` will create a filled box. Default value is `3`. See below for the list of accepted constants. replace With value `1`, the pixels of the painted box will overwrite the video’s color and alpha pixels. Default is `0`, which composites the box onto the input video. The parameters for x, y, w and h and t are expressions containing the following constants: in\_h, ih in\_w, iw The input width and height. x y The x and y offset coordinates where the box is drawn. w h The width and height of the drawn box. t The thickness of the drawn box. #### 42.7.1 Examples * Draw a black box around the edge of the input image: drawbox * Draw a box with color red and an opacity of 50%: drawbox=10:20:200:60:red@0.5 The previous example can be specified as: drawbox=x=10:y=20:w=200:h=60:color=red@0.5 * Fill the box with pink color: drawbox=x=10:y=10:w=100:h=100:color=pink@0.5:t=fill * Draw a 2-pixel red 2.40:1 mask: drawbox=x=-t:y=0.5\*(ih-iw/2.4)-t:w=iw+t\*2:h=iw/2.4+t\*2:t=2:c=red ## 43 Vulkan Video Filters Below is a description of the currently available Vulkan video filters. To enable compilation of these filters you need to configure FFmpeg with `--enable-vulkan` and either `--enable-libglslang` or `--enable-libshaderc`. Running Vulkan filters requires you to initialize a hardware device and to pass that device to all filters in any filter graph. \-init\_hw\_device vulkan\[=name\]\[:device\[,key=value...\]\] Initialise a new hardware device of type vulkan called name, using the given device parameters and options in key=value. The following options are supported: debug Switches validation layers on if set to 1. linear\_images Allocates linear images. Does not apply to decoding. disable\_multiplane Disables multiplane images. Does not apply to decoding. \-filter\_hw\_device name Pass the hardware device called name to all filters in any filter graph. For more detailed information see https://www.ffmpeg.org/ffmpeg.html#Advanced-Video-options * Example of choosing the first device and running nlmeans\_vulkan filter with default parameters on it. \-init\_hw\_device vulkan=vk:0 -filter\_hw\_device vk -i INPUT -vf "hwupload,nlmeans\_vulkan,hwdownload" OUTPUT As Vulkan filters are not able to access frame data in normal memory, all frame data needs to be uploaded (hwupload) to hardware surfaces connected to the appropriate device before being used and then downloaded (hwdownload) back to normal memory. Note that hwupload will upload to a frame with the same layout as the software frame, so it may be necessary to add a format filter immediately before to get the input into the right format and hwdownload does not support all formats on the output - it is usually necessary to insert an additional format filter immediately following in the graph to get the output in a supported format. ### 43.1 avgblur\_vulkan Apply an average blur filter, implemented on the GPU using Vulkan. The filter accepts the following options: sizeX Set horizontal radius size. Range is `[1, 32]` and default value is `3`. sizeY Set vertical radius size. Range is `[1, 32]` and default value is `3`. planes Set which planes to filter. Default value is `0xf`, by which all planes are processed. ### 43.2 blend\_vulkan Blend two Vulkan frames into each other. The `blend` filter takes two input streams and outputs one stream, the first input is the "top" layer and second input is "bottom" layer. By default, the output terminates when the longest input terminates. A description of the accepted options follows. c0\_mode c1\_mode c2\_mode c3\_mode all\_mode Set blend mode for specific pixel component or all pixel components in case of all\_mode. Default value is `normal`. Available values for component modes are: ‘normal’ ‘multiply’ ### 43.3 bwdif\_vulkan Deinterlacer using bwdif, the "Bob Weaver Deinterlacing Filter" algorithm, implemented on the GPU using Vulkan. It accepts the following parameters: mode The interlacing mode to adopt. It accepts one of the following values: 0, send\_frame Output one frame for each frame. 1, send\_field Output one frame for each field. The default value is `send_field`. parity The picture field parity assumed for the input interlaced video. It accepts one of the following values: 0, tff Assume the top field is first. 1, bff Assume the bottom field is first. \-1, auto Enable automatic detection of field parity. The default value is `auto`. If the interlacing is unknown or the decoder does not export this information, top field first will be assumed. deint Specify which frames to deinterlace. Accepts one of the following values: 0, all Deinterlace all frames. 1, interlaced Only deinterlace frames marked as interlaced. The default value is `all`. ### 43.4 chromaber\_vulkan Apply an effect that emulates chromatic aberration. Works best with RGB inputs, but provides a similar effect with YCbCr inputs too. dist\_x Horizontal displacement multiplier. Each chroma pixel’s position will be multiplied by this amount, starting from the center of the image. Default is `0`. dist\_y Similarly, this sets the vertical displacement multiplier. Default is `0`. ### 43.5 color\_vulkan Video source that creates a Vulkan frame of a solid color. Useful for benchmarking, or overlaying. It accepts the following parameters: color The color to use. Either a name, or a hexadecimal value. The default value is `black`. size The size of the output frame. Default value is `1920x1080`. rate The framerate to output at. Default value is `60` frames per second. duration The video duration. Default value is `-0.000001`. sar The video signal aspect ratio. Default value is `1/1`. format The pixel format of the output Vulkan frames. Default value is `yuv444p`. out\_range Set the output YCbCr sample range. This allows the autodetected value to be overridden as well as allows forcing a specific value used for the output and encoder. If not specified, the range depends on the pixel format. Possible values: ‘auto/unknown’ Choose automatically. ‘jpeg/full/pc’ Set full range (0-255 in case of 8-bit luma). ‘mpeg/limited/tv’ Set "MPEG" range (16-235 in case of 8-bit luma). ### 43.6 vflip\_vulkan Flips an image vertically. ### 43.7 hflip\_vulkan Flips an image horizontally. ### 43.8 flip\_vulkan Flips an image along both the vertical and horizontal axis. ### 43.9 gblur\_vulkan Apply Gaussian blur filter on Vulkan frames. The filter accepts the following options: sigma Set horizontal sigma, standard deviation of Gaussian blur. Default is `0.5`. sigmaV Set vertical sigma, if negative it will be same as `sigma`. Default is `-1`. planes Set which planes to filter. By default all planes are filtered. size Set the kernel size along the horizontal axis. Default is `19`. sizeV Set the kernel size along the vertical axis. Default is `0`, which sets to use the same value as size. ### 43.10 nlmeans\_vulkan Denoise frames using Non-Local Means algorithm, implemented on the GPU using Vulkan. Supports more pixel formats than nlmeans or nlmeans\_opencl, including alpha channel support. The filter accepts the following options. s Set denoising strength for all components. Default is 1.0. Must be in range \[1.0, 100.0\]. p Set patch size for all planes. Default is 7. Must be odd number in range \[0, 99\]. r Set research size. Default is 15. Must be odd number in range \[0, 99\]. t Set parallelism. Default is 36. Must be a number in the range \[1, 168\]. Larger values may speed up processing, at the cost of more VRAM. Lower values will slow it down, reducing VRAM usage. Only supported on GPUs with atomic float operations (RDNA3+, Ampere+). s0 s1 s2 s3 Set denoising strength for a specific component. Default is 1, equal to s. Must be odd number in range \[1, 100\]. p0 p1 p2 p3 Set patch size for a specific component. Default is 7, equal to p. Must be odd number in range \[0, 99\]. ### 43.11 overlay\_vulkan Overlay one video on top of another. It takes two inputs and has one output. The first input is the "main" video on which the second input is overlaid. This filter requires all inputs to use the same pixel format. So, format conversion may be needed. The filter accepts the following options: x Set the x coordinate of the overlaid video on the main video. Default value is `0`. y Set the y coordinate of the overlaid video on the main video. Default value is `0`. ### 43.12 transpose\_vt Transpose rows with columns in the input video and optionally flip it. For more in depth examples see the transpose video filter, which shares mostly the same options. It accepts the following parameters: dir Specify the transposition direction. Can assume the following values: ‘cclock\_flip’ Rotate by 90 degrees counterclockwise and vertically flip. (default) ‘clock’ Rotate by 90 degrees clockwise. ‘cclock’ Rotate by 90 degrees counterclockwise. ‘clock\_flip’ Rotate by 90 degrees clockwise and vertically flip. ‘hflip’ Flip the input video horizontally. ‘vflip’ Flip the input video vertically. passthrough Do not apply the transposition if the input geometry matches the one specified by the specified value. It accepts the following values: ‘none’ Always apply transposition. (default) ‘portrait’ Preserve portrait geometry (when height >= width). ‘landscape’ Preserve landscape geometry (when width >= height). ### 43.13 transpose\_vulkan Transpose rows with columns in the input video and optionally flip it. For more in depth examples see the transpose video filter, which shares mostly the same options. It accepts the following parameters: dir Specify the transposition direction. Can assume the following values: ‘cclock\_flip’ Rotate by 90 degrees counterclockwise and vertically flip. (default) ‘clock’ Rotate by 90 degrees clockwise. ‘cclock’ Rotate by 90 degrees counterclockwise. ‘clock\_flip’ Rotate by 90 degrees clockwise and vertically flip. passthrough Do not apply the transposition if the input geometry matches the one specified by the specified value. It accepts the following values: ‘none’ Always apply transposition. (default) ‘portrait’ Preserve portrait geometry (when height >= width). ‘landscape’ Preserve landscape geometry (when width >= height). ## 44 QSV Video Filters Below is a description of the currently available QSV video filters. To enable compilation of these filters you need to configure FFmpeg with `--enable-libmfx` or `--enable-libvpl`. To use QSV filters, you need to setup the QSV device correctly. For more information, please read https://trac.ffmpeg.org/wiki/Hardware/QuickSync ### 44.1 hstack\_qsv Stack input videos horizontally. This is the QSV variant of the hstack filter, each input stream may have different height, this filter will scale down/up each input stream while keeping the original aspect. It accepts the following options: inputs See hstack. shortest See hstack. height Set height of output. If set to 0, this filter will set height of output to height of the first input stream. Default value is 0. ### 44.2 vstack\_qsv Stack input videos vertically. This is the QSV variant of the vstack filter, each input stream may have different width, this filter will scale down/up each input stream while keeping the original aspect. It accepts the following options: inputs See vstack. shortest See vstack. width Set width of output. If set to 0, this filter will set width of output to width of the first input stream. Default value is 0. ### 44.3 xstack\_qsv Stack video inputs into custom layout. This is the QSV variant of the xstack filter. It accepts the following options: inputs See xstack. shortest See xstack. layout See xstack. Moreover, this permits the user to supply output size for each input stream. xstack\_qsv=inputs=4:layout=0\_0\_1920x1080|0\_h0\_1920x1080|w0\_0\_1920x1080|w0\_h0\_1920x1080 grid See xstack. grid\_tile\_size Set output size for each input stream when grid is set. If this option is not set, this filter will set output size by default to the size of the first input stream. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. fill See xstack. ## 45 Video Sources Below is a description of the currently available video sources. ### 45.1 buffer Buffer video frames, and make them available to the filter chain. This source is mainly intended for a programmatic use, in particular through the interface defined in libavfilter/buffersrc.h. It accepts the following parameters: video\_size Specify the size (width and height) of the buffered video frames. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. width The input video width. height The input video height. pix\_fmt A string representing the pixel format of the buffered video frames. It may be a number corresponding to a pixel format, or a pixel format name. time\_base Specify the timebase assumed by the timestamps of the buffered frames. frame\_rate Specify the frame rate expected for the video stream. colorspace A string representing the color space of the buffered video frames. It may be a number corresponding to a color space, or a color space name. range A string representing the color range of the buffered video frames. It may be a number corresponding to a color range, or a color range name. pixel\_aspect, sar The sample (pixel) aspect ratio of the input video. hw\_frames\_ctx When using a hardware pixel format, this should be a reference to an AVHWFramesContext describing input frames. For example: buffer=width=320:height=240:pix\_fmt=yuv410p:time\_base=1/24:sar=1 will instruct the source to accept video frames with size 320x240 and with format "yuv410p", assuming 1/24 as the timestamps timebase and square pixels (1:1 sample aspect ratio). Since the pixel format with name "yuv410p" corresponds to the number 6 (check the enum AVPixelFormat definition in libavutil/pixfmt.h), this example corresponds to: buffer=size=320x240:pixfmt=6:time\_base=1/24:pixel\_aspect=1/1 Alternatively, the options can be specified as a flat string, but this syntax is deprecated: width:height:pix\_fmt:time\_base.num:time\_base.den:pixel\_aspect.num:pixel\_aspect.den ### 45.2 cellauto Create a pattern generated by an elementary cellular automaton. The initial state of the cellular automaton can be defined through the filename and pattern options. If such options are not specified an initial state is created randomly. At each new frame a new row in the video is filled with the result of the cellular automaton next generation. The behavior when the whole frame is filled is defined by the scroll option. This source accepts the following options: filename, f Read the initial cellular automaton state, i.e. the starting row, from the specified file. In the file, each non-whitespace character is considered an alive cell, a newline will terminate the row, and further characters in the file will be ignored. pattern, p Read the initial cellular automaton state, i.e. the starting row, from the specified string. Each non-whitespace character in the string is considered an alive cell, a newline will terminate the row, and further characters in the string will be ignored. rate, r Set the video rate, that is the number of frames generated per second. Default is 25. random\_fill\_ratio, ratio Set the random fill ratio for the initial cellular automaton row. It is a floating point number value ranging from 0 to 1, defaults to 1/PHI. This option is ignored when a file or a pattern is specified. random\_seed, seed Set the seed for filling randomly the initial row, must be an integer included between 0 and UINT32\_MAX. If not specified, or if explicitly set to -1, the filter will try to use a good random seed on a best effort basis. rule Set the cellular automaton rule, it is a number ranging from 0 to 255. Default value is 110. size, s Set the size of the output video. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. If filename or pattern is specified, the size is set by default to the width of the specified initial state row, and the height is set to width \* PHI. If size is set, it must contain the width of the specified pattern string, and the specified pattern will be centered in the larger row. If a filename or a pattern string is not specified, the size value defaults to "320x518" (used for a randomly generated initial state). scroll If set to 1, scroll the output upward when all the rows in the output have been already filled. If set to 0, the new generated row will be written over the top row just after the bottom row is filled. Defaults to 1. start\_full, full If set to 1, completely fill the output with generated rows before outputting the first frame. This is the default behavior, for disabling set the value to 0. stitch If set to 1, stitch the left and right row edges together. This is the default behavior, for disabling set the value to 0. #### 45.2.1 Examples * Read the initial state from pattern, and specify an output of size 200x400. cellauto=f=pattern:s=200x400 * Generate a random initial row with a width of 200 cells, with a fill ratio of 2/3: cellauto=ratio=2/3:s=200x200 * Create a pattern generated by rule 18 starting by a single alive cell centered on an initial row with width 100: cellauto=p=@:s=100x400:full=0:rule=18 * Specify a more elaborated initial pattern: cellauto=p='@@ @ @@':s=100x400:full=0:rule=18 ### 45.3 coreimagesrc Video source generated on GPU using Apple’s CoreImage API on OSX. This video source is a specialized version of the coreimage video filter. Use a core image generator at the beginning of the applied filterchain to generate the content. The coreimagesrc video source accepts the following options: list\_generators List all available generators along with all their respective options as well as possible minimum and maximum values along with the default values. list\_generators=true size, s Specify the size of the sourced video. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. The default value is `320x240`. rate, r Specify the frame rate of the sourced video, as the number of frames generated per second. It has to be a string in the format frame\_rate\_num/frame\_rate\_den, an integer number, a floating point number or a valid video frame rate abbreviation. The default value is "25". sar Set the sample aspect ratio of the sourced video. duration, d Set the duration of the sourced video. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If not specified, or the expressed duration is negative, the video is supposed to be generated forever. Additionally, all options of the coreimage video filter are accepted. A complete filterchain can be used for further processing of the generated input without CPU-HOST transfer. See coreimage documentation and examples for details. #### 45.3.1 Examples * Use CIQRCodeGenerator to create a QR code for the FFmpeg homepage, given as complete and escaped command-line for Apple’s standard bash shell: ffmpeg -f lavfi -i coreimagesrc=s=100x100:filter=CIQRCodeGenerator@inputMessage=https\\\\\\\\\\://FFmpeg.org/@inputCorrectionLevel=H -frames:v 1 QRCode.png This example is equivalent to the QRCode example of coreimage without the need for a nullsrc video source. ### 45.4 ddagrab Captures the Windows Desktop via Desktop Duplication API. The filter exclusively returns D3D11 Hardware Frames, for on-gpu encoding or processing. So an explicit hwdownload is needed for any kind of software processing. It accepts the following options: output\_idx DXGI Output Index to capture. Usually corresponds to the index Windows has given the screen minus one, so it’s starting at 0. Defaults to output 0. draw\_mouse Whether to draw the mouse cursor. Defaults to true. Only affects hardware cursors. If a game or application renders its own cursor, it’ll always be captured. framerate Maximum framerate at which the desktop will be captured - the interval between successive frames will not be smaller than the inverse of the framerate. When dup\_frames is true (the default) and the desktop is not being updated often enough, the filter will duplicate a previous frame. Note that there is no background buffering going on, so when the filter is not polled often enough then the actual inter-frame interval may be significantly larger. Defaults to 30 FPS. video\_size Specify the size of the captured video. Defaults to the full size of the screen. Cropped from the bottom/right if smaller than screen size. offset\_x Horizontal offset of the captured video. offset\_y Vertical offset of the captured video. output\_fmt Desired filter output format. Defaults to 8 Bit BGRA. It accepts the following values: ‘auto’ Passes all supported output formats to DDA and returns what DDA decides to use. ‘8bit’ ‘bgra’ 8 Bit formats always work, and DDA will convert to them if necessary. ‘10bit’ ‘x2bgr10’ Filter initialization will fail if 10 bit format is requested but unavailable. dup\_frames When this option is set to true (the default), the filter will duplicate frames when the desktop has not been updated in order to maintain approximately constant target framerate. When this option is set to false, the filter will wait for the desktop to be updated (inter-frame intervals may vary significantly in this case). #### 45.4.1 Examples Capture primary screen and encode using nvenc: ffmpeg -f lavfi -i ddagrab -c:v h264\_nvenc -cq 18 output.mp4 You can also skip the lavfi device and directly use the filter. Also demonstrates downloading the frame and encoding with libx264. Explicit output format specification is required in this case: ffmpeg -filter\_complex ddagrab=output\_idx=1:framerate=60,hwdownload,format=bgra -c:v libx264 -crf 18 output.mp4 If you want to capture only a subsection of the desktop, this can be achieved by specifying a smaller size and its offsets into the screen: ddagrab=video\_size=800x600:offset\_x=100:offset\_y=100 ### 45.5 gradients Generate several gradients. size, s Set frame size. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is "640x480". rate, r Set frame rate, expressed as number of frames per second. Default value is "25". c0, c1, c2, c3, c4, c5, c6, c7 Set 8 colors. Default values for colors is to pick random one. x0, y0, y0, y1 Set gradient line source and destination points. If negative or out of range, random ones are picked. nb\_colors, n Set number of colors to use at once. Allowed range is from 2 to 8. Default value is 2. seed Set seed for picking gradient line points. duration, d Set the duration of the sourced video. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If not specified, or the expressed duration is negative, the video is supposed to be generated forever. speed Set speed of gradients rotation. type, t Set type of gradients. Available values are: ‘linear’ ‘radial’ ‘circular’ ‘spiral’ ‘square’ Default type is linear. #### 45.5.1 Commands This source supports the some above options as commands. ### 45.6 mandelbrot Generate a Mandelbrot set fractal, and progressively zoom towards the point specified with start\_x and start\_y. This source accepts the following options: end\_pts Set the terminal pts value. Default value is 400. end\_scale Set the terminal scale value. Must be a floating point value. Default value is 0.3. inner Set the inner coloring mode, that is the algorithm used to draw the Mandelbrot fractal internal region. It shall assume one of the following values: black Set black mode. convergence Show time until convergence. mincol Set color based on point closest to the origin of the iterations. period Set period mode. Default value is mincol. bailout Set the bailout value. Default value is 10.0. maxiter Set the maximum of iterations performed by the rendering algorithm. Default value is 7189. outer Set outer coloring mode. It shall assume one of following values: iteration\_count Set iteration count mode. normalized\_iteration\_count set normalized iteration count mode. Default value is normalized\_iteration\_count. rate, r Set frame rate, expressed as number of frames per second. Default value is "25". size, s Set frame size. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is "640x480". start\_scale Set the initial scale value. Default value is 3.0. start\_x Set the initial x position. Must be a floating point value between -100 and 100. Default value is -0.743643887037158704752191506114774. start\_y Set the initial y position. Must be a floating point value between -100 and 100. Default value is -0.131825904205311970493132056385139. ### 45.7 mptestsrc Generate various test patterns, as generated by the MPlayer test filter. The size of the generated video is fixed, and is 256x256. This source is useful in particular for testing encoding features. This source accepts the following options: rate, r Specify the frame rate of the sourced video, as the number of frames generated per second. It has to be a string in the format frame\_rate\_num/frame\_rate\_den, an integer number, a floating point number or a valid video frame rate abbreviation. The default value is "25". duration, d Set the duration of the sourced video. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If not specified, or the expressed duration is negative, the video is supposed to be generated forever. test, t Set the number or the name of the test to perform. Supported tests are: dc\_luma dc\_chroma freq\_luma freq\_chroma amp\_luma amp\_chroma cbp mv ring1 ring2 all max\_frames, m Set the maximum number of frames generated for each test, default value is 30. Default value is "all", which will cycle through the list of all tests. Some examples: mptestsrc=t=dc\_luma will generate a "dc\_luma" test pattern. ### 45.8 frei0r\_src Provide a frei0r source. To enable compilation of this filter you need to install the frei0r header and configure FFmpeg with `--enable-frei0r`. This source accepts the following parameters: size The size of the video to generate. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. framerate The framerate of the generated video. It may be a string of the form num/den or a frame rate abbreviation. filter\_name The name to the frei0r source to load. For more information regarding frei0r and how to set the parameters, read the frei0r section in the video filters documentation. filter\_params A ’|’-separated list of parameters to pass to the frei0r source. For example, to generate a frei0r partik0l source with size 200x200 and frame rate 10 which is overlaid on the overlay filter main input: frei0r\_src=size=200x200:framerate=10:filter\_name=partik0l:filter\_params=1234 \[overlay\]; \[in\]\[overlay\] overlay ### 45.9 life Generate a life pattern. This source is based on a generalization of John Conway’s life game. The sourced input represents a life grid, each pixel represents a cell which can be in one of two possible states, alive or dead. Every cell interacts with its eight neighbours, which are the cells that are horizontally, vertically, or diagonally adjacent. At each interaction the grid evolves according to the adopted rule, which specifies the number of neighbor alive cells which will make a cell stay alive or born. The rule option allows one to specify the rule to adopt. This source accepts the following options: filename, f Set the file from which to read the initial grid state. In the file, each non-whitespace character is considered an alive cell, and newline is used to delimit the end of each row. If this option is not specified, the initial grid is generated randomly. rate, r Set the video rate, that is the number of frames generated per second. Default is 25. random\_fill\_ratio, ratio Set the random fill ratio for the initial random grid. It is a floating point number value ranging from 0 to 1, defaults to 1/PHI. It is ignored when a file is specified. random\_seed, seed Set the seed for filling the initial random grid, must be an integer included between 0 and UINT32\_MAX. If not specified, or if explicitly set to -1, the filter will try to use a good random seed on a best effort basis. rule Set the life rule. A rule can be specified with a code of the kind "SNS/BNB", where NS and NB are sequences of numbers in the range 0-8, NS specifies the number of alive neighbor cells which make a live cell stay alive, and NB the number of alive neighbor cells which make a dead cell to become alive (i.e. to "born"). "s" and "b" can be used in place of "S" and "B", respectively. Alternatively a rule can be specified by an 18-bits integer. The 9 high order bits are used to encode the next cell state if it is alive for each number of neighbor alive cells, the low order bits specify the rule for "borning" new cells. Higher order bits encode for an higher number of neighbor cells. For example the number 6153 = `(12<<9)+9` specifies a stay alive rule of 12 and a born rule of 9, which corresponds to "S23/B03". Default value is "S23/B3", which is the original Conway’s game of life rule, and will keep a cell alive if it has 2 or 3 neighbor alive cells, and will born a new cell if there are three alive cells around a dead cell. size, s Set the size of the output video. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. If filename is specified, the size is set by default to the same size of the input file. If size is set, it must contain the size specified in the input file, and the initial grid defined in that file is centered in the larger resulting area. If a filename is not specified, the size value defaults to "320x240" (used for a randomly generated initial grid). stitch If set to 1, stitch the left and right grid edges together, and the top and bottom edges also. Defaults to 1. mold Set cell mold speed. If set, a dead cell will go from death\_color to mold\_color with a step of mold. mold can have a value from 0 to 255. life\_color Set the color of living (or new born) cells. death\_color Set the color of dead cells. If mold is set, this is the first color used to represent a dead cell. mold\_color Set mold color, for definitely dead and moldy cells. For the syntax of these 3 color options, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. #### 45.9.1 Examples * Read a grid from pattern, and center it on a grid of size 300x300 pixels: life=f=pattern:s=300x300 * Generate a random grid of size 200x200, with a fill ratio of 2/3: life=ratio=2/3:s=200x200 * Specify a custom rule for evolving a randomly generated grid: life=rule=S14/B34 * Full example with slow death effect (mold) using `ffplay`: ffplay -f lavfi life=s=300x200:mold=10:r=60:ratio=0.1:death\_color=#C83232:life\_color=#00ff00,scale=1200:800:flags=16 ### 45.10 perlin Generate Perlin noise. Perlin noise is a kind of noise with local continuity in space. This can be used to generate patterns with continuity in space and time, e.g. to simulate smoke, fluids, or terrain. In case more than one octave is specified through the octaves option, Perlin noise is generated as a sum of components, each one with doubled frequency. In this case the persistence option specify the ratio of the amplitude with respect to the previous component. More octave components enable to specify more high frequency details in the generated noise (e.g. small size variations due to boulders in a generated terrain). #### 45.10.1 Options size, s Specify the size (width and height) of the buffered video frames. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `320x240`. rate, r Specify the frame rate expected for the video stream, expressed as a number of frames per second. Default value is `25`. octaves Specify the total number of components making up the noise, each one with doubled frequency. Default value is `1`. persistence Set the ratio used to compute the amplitude of the next octave component with respect to the previous component amplitude. Default value is `1`. xscale yscale Define a scale factor used to multiple the x, y coordinates. This can be useful to define an effect with a pattern stretched along the x or y axis. Default value is `1`. tscale Define a scale factor used to multiple the time coordinate. This can be useful to change the time variation speed. Default value is `1`. random\_mode Set random mode used to compute initial pattern. Supported values are: random Compute and use random seed. ken Use the predefined initial pattern defined by Ken Perlin in the original article, can be useful to compare the output with other sources. seed Use the value specified by random\_seed option. Default value is `random`. random\_seed, seed When random\_mode is set to random\_seed, use this value to compute the initial pattern. Default value is `0`. #### 45.10.2 Examples * Generate single component: perlin * Use Perlin noise with 7 components, each one with a halved contribution to total amplitude: perlin=octaves=7:persistence=0.5 * Chain Perlin noise with the lutyuv to generate a black&white effect: perlin=octaves=3:tscale=0.3,lutyuv=y='if(lt(val\\,128)\\,255\\,0)' * Stretch noise along the y axis, and convert gray level to red-only signal: perlin=octaves=7:tscale=0.4:yscale=0.3,lutrgb=r=val:b=0:g=0 ### 45.11 qrencodesrc Generate a QR code using the libqrencode library (see https://fukuchi.org/works/qrencode/). To enable the compilation of this source, you need to configure FFmpeg with `--enable-libqrencode`. The QR code is generated from the provided text or text pattern. The corresponding QR code is scaled and put in the video output according to the specified output size options. In case no text is specified, the QR code is not generated, but an empty colored output is returned instead. This source accepts the following options: qrcode\_width, q padded\_qrcode\_width, Q Specify an expression for the width of the rendered QR code, with and without padding. The qrcode\_width expression can reference the value set by the padded\_qrcode\_width expression, and vice versa. By default padded\_qrcode\_width is set to qrcode\_width, meaning that there is no padding. These expressions are evaluated only once, when initializing the source. See the qrencode Expressions section for details. Note that some of the constants are missing for the source (for example the x or t or ¸n), since they only makes sense when evaluating the expression for each frame rather than at initialization time. rate, r Specify the frame rate of the sourced video, as the number of frames generated per second. It has to be a string in the format frame\_rate\_num/frame\_rate\_den, an integer number, a floating point number or a valid video frame rate abbreviation. The default value is "25". case\_sensitive, cs Instruct libqrencode to use case sensitive encoding. This is enabled by default. This can be disabled to reduce the QR encoding size. level, l Specify the QR encoding error correction level. With an higher correction level, the encoding size will increase but the code will be more robust to corruption. Lower level is L. It accepts the following values: ‘L’ ‘M’ ‘Q’ ‘H’ expansion Select how the input text is expanded. Can be either `none`, or `normal` (default). See the qrencode Text expansion section for details. text textfile Define the text to be rendered. In case neither is specified, no QR is encoded (just an empty colored frame). In case expansion is enabled, the text is treated as a text template, using the qrencode expansion mechanism. See the qrencode Text expansion section for details. background\_color, bc foreground\_color, fc Set the QR code and background color. The default value of foreground\_color is "black", the default value of background\_color is "white". For the syntax of the color options, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. #### 45.11.1 Examples * Generate a QR code encoding the specified text with the default size: qrencodesrc=text=www.ffmpeg.org * Same as below, but select blue on pink colors: qrencodesrc=text=www.ffmpeg.org:bc=pink:fc=blue * Generate a QR code with width of 200 pixels and padding, making the padded width 4/3 of the QR code width: qrencodesrc=text=www.ffmpeg.org:q=200:Q=4/3\*q * Generate a QR code with padded width of 200 pixels and padding, making the QR code width 3/4 of the padded width: qrencodesrc=text=www.ffmpeg.org:Q=200:q=3/4\*Q * Generate a QR code encoding the frame number: qrencodesrc=text=%{n} * Generate a QR code encoding the GMT timestamp: qrencodesrc=text=%{gmtime} * Generate a QR code encoding the timestamp expressed as a float: qrencodesrc=text=%{pts} ### 45.12 allrgb, allyuv, color, colorchart, colorspectrum, haldclutsrc, nullsrc, pal75bars, pal100bars, rgbtestsrc, smptebars, smptehdbars, testsrc, testsrc2, yuvtestsrc The `allrgb` source returns frames of size 4096x4096 of all rgb colors. The `allyuv` source returns frames of size 4096x4096 of all yuv colors. The `color` source provides an uniformly colored input. The `colorchart` source provides a colors checker chart. The `colorspectrum` source provides a color spectrum input. The `haldclutsrc` source provides an identity Hald CLUT. See also haldclut filter. The `nullsrc` source returns unprocessed video frames. It is mainly useful to be employed in analysis / debugging tools, or as the source for filters which ignore the input data. The `pal75bars` source generates a color bars pattern, based on EBU PAL recommendations with 75% color levels. The `pal100bars` source generates a color bars pattern, based on EBU PAL recommendations with 100% color levels. The `rgbtestsrc` source generates an RGB test pattern useful for detecting RGB vs BGR issues. You should see a red, green and blue stripe from top to bottom. The `smptebars` source generates a color bars pattern, based on the SMPTE Engineering Guideline EG 1-1990. The `smptehdbars` source generates a color bars pattern, based on the SMPTE RP 219-2002. The `testsrc` source generates a test video pattern, showing a color pattern, a scrolling gradient and a timestamp. This is mainly intended for testing purposes. The `testsrc2` source is similar to testsrc, but supports more pixel formats instead of just `rgb24`. This allows using it as an input for other tests without requiring a format conversion. The `yuvtestsrc` source generates an YUV test pattern. You should see a y, cb and cr stripe from top to bottom. The sources accept the following parameters: level Specify the level of the Hald CLUT, only available in the `haldclutsrc` source. A level of `N` generates a picture of `N*N*N` by `N*N*N` pixels to be used as identity matrix for 3D lookup tables. Each component is coded on a `1/(N*N)` scale. color, c Specify the color of the source, only available in the `color` source. For the syntax of this option, check the (ffmpeg-utils)"Color" section in the ffmpeg-utils manual. size, s Specify the size of the sourced video. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. The default value is `320x240`. This option is not available with the `allrgb`, `allyuv`, and `haldclutsrc` filters. rate, r Specify the frame rate of the sourced video, as the number of frames generated per second. It has to be a string in the format frame\_rate\_num/frame\_rate\_den, an integer number, a floating point number or a valid video frame rate abbreviation. The default value is "25". duration, d Set the duration of the sourced video. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If not specified, or the expressed duration is negative, the video is supposed to be generated forever. Since the frame rate is used as time base, all frames including the last one will have their full duration. If the specified duration is not a multiple of the frame duration, it will be rounded up. sar Set the sample aspect ratio of the sourced video. alpha Specify the alpha (opacity) of the background, only available in the `testsrc2` source. The value must be between 0 (fully transparent) and 255 (fully opaque, the default). decimals, n Set the number of decimals to show in the timestamp, only available in the `testsrc` source. The displayed timestamp value will correspond to the original timestamp value multiplied by the power of 10 of the specified value. Default value is 0. type Set the type of the color spectrum, only available in the `colorspectrum` source. Can be one of the following: ‘black’ ‘white’ ‘all’ patch\_size Set patch size of single color patch, only available in the `colorchart` source. Default is `64x64`. preset Set colorchecker colors preset, only available in the `colorchart` source. Available values are: ‘reference’ ‘skintones’ Default value is `reference`. #### 45.12.1 Examples * Generate a video with a duration of 5.3 seconds, with size 176x144 and a frame rate of 10 frames per second: testsrc=duration=5.3:size=qcif:rate=10 * The following graph description will generate a red source with an opacity of 0.2, with size "qcif" and a frame rate of 10 frames per second: color=c=red@0.2:s=qcif:r=10 * If the input content is to be ignored, `nullsrc` can be used. The following command generates noise in the luma plane by employing the `geq` filter: nullsrc=s=256x256, geq=random(1)\*255:128:128 #### 45.12.2 Commands The `color` source supports the following commands: c, color Set the color of the created image. Accepts the same syntax of the corresponding color option. ### 45.13 openclsrc Generate video using an OpenCL program. source OpenCL program source file. kernel Kernel name in program. size, s Size of frames to generate. This must be set. format Pixel format to use for the generated frames. This must be set. rate, r Number of frames generated every second. Default value is ’25’. For details of how the program loading works, see the program\_opencl filter. Example programs: * Generate a colour ramp by setting pixel values from the position of the pixel in the output image. (Note that this will work with all pixel formats, but the generated output will not be the same.) \_\_kernel void ramp(\_\_write\_only image2d\_t dst, unsigned int index) { int2 loc = (int2)(get\_global\_id(0), get\_global\_id(1)); float4 val; val.xy = val.zw = convert\_float2(loc) / convert\_float2(get\_image\_dim(dst)); write\_imagef(dst, loc, val); } * Generate a Sierpinski carpet pattern, panning by a single pixel each frame. \_\_kernel void sierpinski\_carpet(\_\_write\_only image2d\_t dst, unsigned int index) { int2 loc = (int2)(get\_global\_id(0), get\_global\_id(1)); float4 value = 0.0f; int x = loc.x + index; int y = loc.y + index; while (x > 0 || y > 0) { if (x % 3 == 1 && y % 3 == 1) { value = 1.0f; break; } x /= 3; y /= 3; } write\_imagef(dst, loc, value); } ### 45.14 sierpinski Generate a Sierpinski carpet/triangle fractal, and randomly pan around. This source accepts the following options: size, s Set frame size. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is "640x480". rate, r Set frame rate, expressed as number of frames per second. Default value is "25". seed Set seed which is used for random panning. jump Set max jump for single pan destination. Allowed range is from 1 to 10000. type Set fractal type, can be default `carpet` or `triangle`. ### 45.15 zoneplate Generate a zoneplate test video pattern. This source accepts the following options: size, s Set frame size. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is "320x240". rate, r Set frame rate, expressed as number of frames per second. Default value is "25". duration, d Set the duration of the sourced video. See (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual for the accepted syntax. If not specified, or the expressed duration is negative, the video is supposed to be generated forever. sar Set the sample aspect ratio of the sourced video. precision Set precision in bits for look-up table for sine calculations. Default value is 10. Allowed range is from 4 to 16. xo Set horizontal axis offset for output signal. Default value is 0. yo Set vertical axis offset for output signal. Default value is 0. to Set time axis offset for output signal. Default value is 0. k0 Set 0-order, constant added to signal phase. Default value is 0. kx Set 1-order, phase factor multiplier for horizontal axis. Default value is 0. ky Set 1-order, phase factor multiplier for vertical axis. Default value is 0. kt Set 1-order, phase factor multiplier for time axis. Default value is 0. kxt, kyt, kxy Set phase factor multipliers for combination of spatial and temporal axis. Default value is 0. kx2 Set 2-order, phase factor multiplier for horizontal axis. Default value is 0. ky2 Set 2-order, phase factor multiplier for vertical axis. Default value is 0. kt2 Set 2-order, phase factor multiplier for time axis. Default value is 0. ku Set the constant added to final phase to produce chroma-blue component of signal. Default value is 0. kv Set the constant added to final phase to produce chroma-red component of signal. Default value is 0. #### 45.15.1 Commands This source supports the some above options as commands. #### 45.15.2 Examples * Generate horizontal color sine sweep: zoneplate=ku=512:kv=0:kt2=0:kx2=256:s=wvga:xo=-426:kt=11 * Generate vertical color sine sweep: zoneplate=ku=512:kv=0:kt2=0:ky2=156:s=wvga:yo=-240:kt=11 * Generate circular zone-plate: zoneplate=ku=512:kv=100:kt2=0:ky2=256:kx2=556:s=wvga:yo=0:kt=11 ## 46 Video Sinks Below is a description of the currently available video sinks. ### 46.1 buffersink Buffer video frames, and make them available to the end of the filter graph. This sink is mainly intended for programmatic use, in particular through the interface defined in libavfilter/buffersink.h or the options system. It accepts a pointer to an AVBufferSinkContext structure, which defines the incoming buffers’ formats, to be passed as the opaque parameter to `avfilter_init_filter` for initialization. ### 46.2 nullsink Null video sink: do absolutely nothing with the input video. It is mainly useful as a template and for use in analysis / debugging tools. ## 47 Multimedia Filters Below is a description of the currently available multimedia filters. ### 47.1 a3dscope Convert input audio to 3d scope video output. The filter accepts the following options: rate, r Set frame rate, expressed as number of frames per second. Default value is "25". size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `hd720`. fov Set the camera field of view. Default is 90 degrees. Allowed range is from 40 to 150. roll Set the camera roll. pitch Set the camera pitch. yaw Set the camera yaw. xzoom Set the camera zoom on X-axis. yzoom Set the camera zoom on Y-axis. zzoom Set the camera zoom on Z-axis. xpos Set the camera position on X-axis. ypos Set the camera position on Y-axis. zpos Set the camera position on Z-axis. length Set the length of displayed audio waves in number of frames. #### 47.1.1 Commands Filter supports the some above options as commands. ### 47.2 abitscope Convert input audio to a video output, displaying the audio bit scope. The filter accepts the following options: rate, r Set frame rate, expressed as number of frames per second. Default value is "25". size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `1024x256`. colors Specify list of colors separated by space or by ’|’ which will be used to draw channels. Unrecognized or missing colors will be replaced by white color. mode, m Set output mode. Can be `bars` or `trace`. Default is `bars`. ### 47.3 adrawgraph Draw a graph using input audio metadata. See drawgraph ### 47.4 agraphmonitor See graphmonitor. ### 47.5 ahistogram Convert input audio to a video output, displaying the volume histogram. The filter accepts the following options: dmode Specify how histogram is calculated. It accepts the following values: ‘single’ Use single histogram for all channels. ‘separate’ Use separate histogram for each channel. Default is `single`. rate, r Set frame rate, expressed as number of frames per second. Default value is "25". size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `hd720`. scale Set display scale. It accepts the following values: ‘log’ logarithmic ‘sqrt’ square root ‘cbrt’ cubic root ‘lin’ linear ‘rlog’ reverse logarithmic Default is `log`. ascale Set amplitude scale. It accepts the following values: ‘log’ logarithmic ‘lin’ linear Default is `log`. acount Set how much frames to accumulate in histogram. Default is 1. Setting this to -1 accumulates all frames. rheight Set histogram ratio of window height. slide Set sonogram sliding. It accepts the following values: ‘replace’ replace old rows with new ones. ‘scroll’ scroll from top to bottom. Default is `replace`. hmode Set histogram mode. It accepts the following values: ‘abs’ Use absolute values of samples. ‘sign’ Use untouched values of samples. Default is `abs`. ### 47.6 aphasemeter Measures phase of input audio, which is exported as metadata `lavfi.aphasemeter.phase`, representing mean phase of current audio frame. A video output can also be produced and is enabled by default. The audio is passed through as first output. Audio will be rematrixed to stereo if it has a different channel layout. Phase value is in range `[-1, 1]` where `-1` means left and right channels are completely out of phase and `1` means channels are in phase. The filter accepts the following options, all related to its video output: rate, r Set the output frame rate. Default value is `25`. size, s Set the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `800x400`. rc gc bc Specify the red, green, blue contrast. Default values are `2`, `7` and `1`. Allowed range is `[0, 255]`. mpc Set color which will be used for drawing median phase. If color is `none` which is default, no median phase value will be drawn. video Enable video output. Default is enabled. #### 47.6.1 phasing detection The filter also detects out of phase and mono sequences in stereo streams. It logs the sequence start, end and duration when it lasts longer or as long as the minimum set. The filter accepts the following options for this detection: phasing Enable mono and out of phase detection. Default is disabled. tolerance, t Set phase tolerance for mono detection, in amplitude ratio. Default is `0`. Allowed range is `[0, 1]`. angle, a Set angle threshold for out of phase detection, in degree. Default is `170`. Allowed range is `[90, 180]`. duration, d Set mono or out of phase duration until notification, expressed in seconds. Default is `2`. #### 47.6.2 Examples * Complete example with `ffmpeg` to detect 1 second of mono with 0.001 phase tolerance: ffmpeg -i stereo.wav -af aphasemeter=video=0:phasing=1:duration=1:tolerance=0.001 -f null - ### 47.7 avectorscope Convert input audio to a video output, representing the audio vector scope. The filter is used to measure the difference between channels of stereo audio stream. A monaural signal, consisting of identical left and right signal, results in straight vertical line. Any stereo separation is visible as a deviation from this line, creating a Lissajous figure. If the straight (or deviation from it) but horizontal line appears this indicates that the left and right channels are out of phase. The filter accepts the following options: mode, m Set the vectorscope mode. Available values are: ‘lissajous’ Lissajous rotated by 45 degrees. ‘lissajous\_xy’ Same as above but not rotated. ‘polar’ Shape resembling half of circle. Default value is ‘lissajous’. size, s Set the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `400x400`. rate, r Set the output frame rate. Default value is `25`. rc gc bc ac Specify the red, green, blue and alpha contrast. Default values are `40`, `160`, `80` and `255`. Allowed range is `[0, 255]`. rf gf bf af Specify the red, green, blue and alpha fade. Default values are `15`, `10`, `5` and `5`. Allowed range is `[0, 255]`. zoom Set the zoom factor. Default value is `1`. Allowed range is `[0, 10]`. Values lower than 1 will auto adjust zoom factor to maximal possible value. draw Set the vectorscope drawing mode. Available values are: ‘dot’ Draw dot for each sample. ‘line’ Draw line between previous and current sample. ‘aaline’ Draw anti-aliased line between previous and current sample. Default value is ‘dot’. scale Specify amplitude scale of audio samples. Available values are: ‘lin’ Linear. ‘sqrt’ Square root. ‘cbrt’ Cubic root. ‘log’ Logarithmic. swap Swap left channel axis with right channel axis. mirror Mirror axis. ‘none’ No mirror. ‘x’ Mirror only x axis. ‘y’ Mirror only y axis. ‘xy’ Mirror both axis. #### 47.7.1 Examples * Complete example using `ffplay`: ffplay -f lavfi 'amovie=input.mp3, asplit \[a\]\[out1\]; \[a\] avectorscope=zoom=1.3:rc=2:gc=200:bc=10:rf=1:gf=8:bf=7 \[out0\]' #### 47.7.2 Commands This filter supports the all above options as commands except options `size` and `rate`. ### 47.8 bench, abench Benchmark part of a filtergraph. The filter accepts the following options: action Start or stop a timer. Available values are: ‘start’ Get the current time, set it as frame metadata (using the key `lavfi.bench.start_time`), and forward the frame to the next filter. ‘stop’ Get the current time and fetch the `lavfi.bench.start_time` metadata from the input frame metadata to get the time difference. Time difference, average, maximum and minimum time (respectively `t`, `avg`, `max` and `min`) are then printed. The timestamps are expressed in seconds. #### 47.8.1 Examples * Benchmark selectivecolor filter: bench=start,selectivecolor=reds=-.2 .12 -.49,bench=stop ### 47.9 concat Concatenate audio and video streams, joining them together one after the other. The filter works on segments of synchronized video and audio streams. All segments must have the same number of streams of each type, and that will also be the number of streams at output. The filter accepts the following options: n Set the number of segments. Default is 2. v Set the number of output video streams, that is also the number of video streams in each segment. Default is 1. a Set the number of output audio streams, that is also the number of audio streams in each segment. Default is 0. unsafe Activate unsafe mode: do not fail if segments have a different format. The filter has v+a outputs: first v video outputs, then a audio outputs. There are nx(v+a) inputs: first the inputs for the first segment, in the same order as the outputs, then the inputs for the second segment, etc. Related streams do not always have exactly the same duration, for various reasons including codec frame size or sloppy authoring. For that reason, related synchronized streams (e.g. a video and its audio track) should be concatenated at once. The concat filter will use the duration of the longest stream in each segment (except the last one), and if necessary pad shorter audio streams with silence. For this filter to work correctly, all segments must start at timestamp 0. All corresponding streams must have the same parameters in all segments; the filtering system will automatically select a common pixel format for video streams, and a common sample format, sample rate and channel layout for audio streams, but other settings, such as resolution, must be converted explicitly by the user. Different frame rates are acceptable but will result in variable frame rate at output; be sure to configure the output file to handle it. #### 47.9.1 Examples * Concatenate an opening, an episode and an ending, all in bilingual version (video in stream 0, audio in streams 1 and 2): ffmpeg -i opening.mkv -i episode.mkv -i ending.mkv -filter\_complex \\ '\[0:0\] \[0:1\] \[0:2\] \[1:0\] \[1:1\] \[1:2\] \[2:0\] \[2:1\] \[2:2\] concat=n=3:v=1:a=2 \[v\] \[a1\] \[a2\]' \\ -map '\[v\]' -map '\[a1\]' -map '\[a2\]' output.mkv * Concatenate two parts, handling audio and video separately, using the (a)movie sources, and adjusting the resolution: movie=part1.mp4, scale=512:288 \[v1\] ; amovie=part1.mp4 \[a1\] ; movie=part2.mp4, scale=512:288 \[v2\] ; amovie=part2.mp4 \[a2\] ; \[v1\] \[v2\] concat \[outv\] ; \[a1\] \[a2\] concat=v=0:a=1 \[outa\] Note that a desync will happen at the stitch if the audio and video streams do not have exactly the same duration in the first file. #### 47.9.2 Commands This filter supports the following commands: next Close the current segment and step to the next one ### 47.10 ebur128 EBU R128 scanner filter. This filter takes an audio stream and analyzes its loudness level. By default, it logs a message at a frequency of 10Hz with the Momentary loudness (identified by `M`), Short-term loudness (`S`), Integrated loudness (`I`) and Loudness Range (`LRA`). The filter can only analyze streams which have sample format is double-precision floating point. The input stream will be converted to this specification, if needed. Users may need to insert aformat and/or aresample filters after this filter to obtain the original parameters. The filter also has a video output (see the video option) with a real time graph to observe the loudness evolution. The graphic contains the logged message mentioned above, so it is not printed anymore when this option is set, unless the verbose logging is set. The main graphing area contains the short-term loudness (3 seconds of analysis), and the gauge on the right is for the momentary loudness (400 milliseconds), but can optionally be configured to instead display short-term loudness (see gauge). The green area marks a +/- 1LU target range around the target loudness (-23LUFS by default, unless modified through target). More information about the Loudness Recommendation EBU R128 on http://tech.ebu.ch/loudness. The filter accepts the following options: video Activate the video output. The audio stream is passed unchanged whether this option is set or no. The video stream will be the first output stream if activated. Default is `0`. size Set the video size. This option is for video only. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default and minimum resolution is `640x480`. meter Set the EBU scale meter. Default is `9`. Common values are `9` and `18`, respectively for EBU scale meter +9 and EBU scale meter +18. Any other integer value between this range is allowed. metadata Set metadata injection. If set to `1`, the audio input will be segmented into 100ms output frames, each of them containing various loudness information in metadata. All the metadata keys are prefixed with `lavfi.r128.`. Default is `0`. framelog Force the frame logging level. Available values are: ‘quiet’ logging disabled ‘info’ information logging level ‘verbose’ verbose logging level By default, the logging level is set to info. If the video or the metadata options are set, it switches to verbose. peak Set peak mode(s). Available modes can be cumulated (the option is a `flag` type). Possible values are: ‘none’ Disable any peak mode (default). ‘sample’ Enable sample-peak mode. Simple peak mode looking for the higher sample value. It logs a message for sample-peak (identified by `SPK`). ‘true’ Enable true-peak mode. If enabled, the peak lookup is done on an over-sampled version of the input stream for better peak accuracy. It logs a message for true-peak. (identified by `TPK`) and true-peak per frame (identified by `FTPK`). This mode requires a build with `libswresample`. dualmono Treat mono input files as "dual mono". If a mono file is intended for playback on a stereo system, its EBU R128 measurement will be perceptually incorrect. If set to `true`, this option will compensate for this effect. Multi-channel input files are not affected by this option. panlaw Set a specific pan law to be used for the measurement of dual mono files. This parameter is optional, and has a default value of -3.01dB. target Set a specific target level (in LUFS) used as relative zero in the visualization. This parameter is optional and has a default value of -23LUFS as specified by EBU R128. However, material published online may prefer a level of -16LUFS (e.g. for use with podcasts or video platforms). gauge Set the value displayed by the gauge. Valid values are `momentary` and s `shortterm`. By default the momentary value will be used, but in certain scenarios it may be more useful to observe the short term value instead (e.g. live mixing). scale Sets the display scale for the loudness. Valid parameters are `absolute` (in LUFS) or `relative` (LU) relative to the target. This only affects the video output, not the summary or continuous log output. integrated Read-only exported value for measured integrated loudness, in LUFS. range Read-only exported value for measured loudness range, in LU. lra\_low Read-only exported value for measured LRA low, in LUFS. lra\_high Read-only exported value for measured LRA high, in LUFS. sample\_peak Read-only exported value for measured sample peak, in dBFS. true\_peak Read-only exported value for measured true peak, in dBFS. #### 47.10.1 Examples * Real-time graph using `ffplay`, with a EBU scale meter +18: ffplay -f lavfi -i "amovie=input.mp3,ebur128=video=1:meter=18 \[out0\]\[out1\]" * Run an analysis with `ffmpeg`: ffmpeg -nostats -i input.mp3 -filter\_complex ebur128 -f null - ### 47.11 interleave, ainterleave Temporally interleave frames from several inputs. `interleave` works with video inputs, `ainterleave` with audio. These filters read frames from several inputs and send the oldest queued frame to the output. Input streams must have well defined, monotonically increasing frame timestamp values. In order to submit one frame to output, these filters need to enqueue at least one frame for each input, so they cannot work in case one input is not yet terminated and will not receive incoming frames. For example consider the case when one input is a `select` filter which always drops input frames. The `interleave` filter will keep reading from that input, but it will never be able to send new frames to output until the input sends an end-of-stream signal. Also, depending on inputs synchronization, the filters will drop frames in case one input receives more frames than the other ones, and the queue is already filled. These filters accept the following options: nb\_inputs, n Set the number of different inputs, it is 2 by default. duration How to determine the end-of-stream. longest The duration of the longest input. (default) shortest The duration of the shortest input. first The duration of the first input. #### 47.11.1 Examples * Interleave frames belonging to different streams using `ffmpeg`: ffmpeg -i bambi.avi -i pr0n.mkv -filter\_complex "\[0:v\]\[1:v\] interleave" out.avi * Add flickering blur effect: select='if(gt(random(0), 0.2), 1, 2)':n=2 \[tmp\], boxblur=2:2, \[tmp\] interleave ### 47.12 latency, alatency Measure filtering latency. Report previous filter filtering latency, delay in number of audio samples for audio filters or number of video frames for video filters. On end of input stream, filter will report min and max measured latency for previous running filter in filtergraph. ### 47.13 metadata, ametadata Manipulate frame metadata. This filter accepts the following options: mode Set mode of operation of the filter. Can be one of the following: ‘select’ If both `value` and `key` is set, select frames which have such metadata. If only `key` is set, select every frame that has such key in metadata. ‘add’ Add new metadata `key` and `value`. If key is already available do nothing. ‘modify’ Modify value of already present key. ‘delete’ If `value` is set, delete only keys that have such value. Otherwise, delete key. If `key` is not set, delete all metadata values in the frame. ‘print’ Print key and its value if metadata was found. If `key` is not set print all metadata values available in frame. key Set key used with all modes. Must be set for all modes except `print` and `delete`. value Set metadata value which will be used. This option is mandatory for `modify` and `add` mode. function Which function to use when comparing metadata value and `value`. Can be one of following: ‘same\_str’ Values are interpreted as strings, returns true if metadata value is same as `value`. ‘starts\_with’ Values are interpreted as strings, returns true if metadata value starts with the `value` option string. ‘less’ Values are interpreted as floats, returns true if metadata value is less than `value`. ‘equal’ Values are interpreted as floats, returns true if `value` is equal with metadata value. ‘greater’ Values are interpreted as floats, returns true if metadata value is greater than `value`. ‘expr’ Values are interpreted as floats, returns true if expression from option `expr` evaluates to true. ‘ends\_with’ Values are interpreted as strings, returns true if metadata value ends with the `value` option string. expr Set expression which is used when `function` is set to `expr`. The expression is evaluated through the eval API and can contain the following constants: VALUE1, FRAMEVAL Float representation of `value` from metadata key. VALUE2, USERVAL Float representation of `value` as supplied by user in `value` option. file If specified in `print` mode, output is written to the named file. Instead of plain filename any writable url can be specified. Filename “-” is a shorthand for standard output. If `file` option is not set, output is written to the log with AV\_LOG\_INFO loglevel. direct Reduces buffering in print mode when output is written to a URL set using file. #### 47.13.1 Examples * Print all metadata values for frames with key `lavfi.signalstats.YDIF` with values between 0 and 1. signalstats,metadata=print:key=lavfi.signalstats.YDIF:value=0:function=expr:expr='between(VALUE1,0,1)' * Print silencedetect output to file metadata.txt. silencedetect,ametadata=mode=print:file=metadata.txt * Direct all metadata to a pipe with file descriptor 4. metadata=mode=print:file='pipe\\:4' ### 47.14 perms, aperms Set read/write permissions for the output frames. These filters are mainly aimed at developers to test direct path in the following filter in the filtergraph. The filters accept the following options: mode Select the permissions mode. It accepts the following values: ‘none’ Do nothing. This is the default. ‘ro’ Set all the output frames read-only. ‘rw’ Set all the output frames directly writable. ‘toggle’ Make the frame read-only if writable, and writable if read-only. ‘random’ Set each output frame read-only or writable randomly. seed Set the seed for the random mode, must be an integer included between `0` and `UINT32_MAX`. If not specified, or if explicitly set to `-1`, the filter will try to use a good random seed on a best effort basis. Note: in case of auto-inserted filter between the permission filter and the following one, the permission might not be received as expected in that following filter. Inserting a format or aformat filter before the perms/aperms filter can avoid this problem. ### 47.15 realtime, arealtime Slow down filtering to match real time approximately. These filters will pause the filtering for a variable amount of time to match the output rate with the input timestamps. They are similar to the re option to `ffmpeg`. They accept the following options: limit Time limit for the pauses. Any pause longer than that will be considered a timestamp discontinuity and reset the timer. Default is 2 seconds. speed Speed factor for processing. The value must be a float larger than zero. Values larger than 1.0 will result in faster than realtime processing, smaller will slow processing down. The limit is automatically adapted accordingly. Default is 1.0. A processing speed faster than what is possible without these filters cannot be achieved. #### 47.15.1 Commands Both filters supports the all above options as commands. ### 47.16 segment, asegment Split single input stream into multiple streams. This filter does opposite of concat filters. `segment` works on video frames, `asegment` on audio samples. This filter accepts the following options: timestamps Timestamps of output segments separated by ’|’. The first segment will run from the beginning of the input stream. The last segment will run until the end of the input stream frames, samples Exact frame/sample count to split the segments. In all cases, prefixing an each segment with ’+’ will make it relative to the previous segment. #### 47.16.1 Examples * Split input audio stream into three output audio streams, starting at start of input audio stream and storing that in 1st output audio stream, then following at 60th second and storing than in 2nd output audio stream, and last after 150th second of input audio stream store in 3rd output audio stream: asegment=timestamps="60|150" ### 47.17 select, aselect Select frames to pass in output. This filter accepts the following options: expr, e Set expression, which is evaluated for each input frame. If the expression is evaluated to zero, the frame is discarded. If the evaluation result is negative or NaN, the frame is sent to the first output; otherwise it is sent to the output with index `ceil(val)-1`, assuming that the input index starts from 0. For example a value of `1.2` corresponds to the output with index `ceil(1.2)-1 = 2-1 = 1`, that is the second output. outputs, n Set the number of outputs. The output to which to send the selected frame is based on the result of the evaluation. Default value is 1. The expression can contain the following constants: n The (sequential) number of the filtered frame, starting from 0. selected\_n The (sequential) number of the selected frame, starting from 0. prev\_selected\_n The sequential number of the last selected frame. It’s NAN if undefined. TB The timebase of the input timestamps. pts The PTS (Presentation TimeStamp) of the filtered frame, expressed in TB units. It’s NAN if undefined. t The PTS of the filtered frame, expressed in seconds. It’s NAN if undefined. prev\_pts The PTS of the previously filtered frame. It’s NAN if undefined. prev\_selected\_pts The PTS of the last previously filtered frame. It’s NAN if undefined. prev\_selected\_t The PTS of the last previously selected frame, expressed in seconds. It’s NAN if undefined. start\_pts The first PTS in the stream which is not NAN. It remains NAN if not found. start\_t The first PTS, in seconds, in the stream which is not NAN. It remains NAN if not found. pict\_type _(video only)_ The type of the filtered frame. It can assume one of the following values: I P B S SI SP BI interlace\_type _(video only)_ The frame interlace type. It can assume one of the following values: PROGRESSIVE The frame is progressive (not interlaced). TOPFIRST The frame is top-field-first. BOTTOMFIRST The frame is bottom-field-first. consumed\_sample\_n _(audio only)_ the number of selected samples before the current frame samples\_n _(audio only)_ the number of samples in the current frame sample\_rate _(audio only)_ the input sample rate key This is 1 if the filtered frame is a key-frame, 0 otherwise. pos the position in the file of the filtered frame, -1 if the information is not available (e.g. for synthetic video); deprecated, do not use scene _(video only)_ value between 0 and 1 to indicate a new scene; a low value reflects a low probability for the current frame to introduce a new scene, while a higher value means the current frame is more likely to be one (see the example below) concatdec\_select The concat demuxer can select only part of a concat input file by setting an inpoint and an outpoint, but the output packets may not be entirely contained in the selected interval. By using this variable, it is possible to skip frames generated by the concat demuxer which are not exactly contained in the selected interval. This works by comparing the frame pts against the lavf.concat.start\_time and the lavf.concat.duration packet metadata values which are also present in the decoded frames. The concatdec\_select variable is -1 if the frame pts is at least start\_time and either the duration metadata is missing or the frame pts is less than start\_time + duration, 0 otherwise, and NaN if the start\_time metadata is missing. That basically means that an input frame is selected if its pts is within the interval set by the concat demuxer. iw _(video only)_ Represents the width of the input video frame. ih _(video only)_ Represents the height of the input video frame. view _(video only)_ View ID for multi-view video. The default value of the select expression is "1". #### 47.17.1 Examples * Select all frames in input: select The example above is the same as: select=1 * Skip all frames: select=0 * Select only I-frames: select='eq(pict\_type\\,I)' * Select one frame every 100: select='not(mod(n\\,100))' * Select only frames contained in the 10-20 time interval: select=between(t\\,10\\,20) * Select only I-frames contained in the 10-20 time interval: select=between(t\\,10\\,20)\*eq(pict\_type\\,I) * Select frames with a minimum distance of 10 seconds: select='isnan(prev\_selected\_t)+gte(t-prev\_selected\_t\\,10)' * Use aselect to select only audio frames with samples number > 100: aselect='gt(samples\_n\\,100)' * Create a mosaic of the first scenes: ffmpeg -i video.avi -vf select='gt(scene\\,0.4)',scale=160:120,tile -frames:v 1 preview.png Comparing scene against a value between 0.3 and 0.5 is generally a sane choice. * Send even and odd frames to separate outputs, and compose them: select=n=2:e='mod(n, 2)+1' \[odd\]\[even\]; \[odd\] pad=h=2\*ih \[tmp\]; \[tmp\]\[even\] overlay=y=h * Select useful frames from an ffconcat file which is using inpoints and outpoints but where the source files are not intra frame only. ffmpeg -copyts -vsync 0 -segment\_time\_metadata 1 -i input.ffconcat -vf select=concatdec\_select -af aselect=concatdec\_select output.avi ### 47.18 sendcmd, asendcmd Send commands to filters in the filtergraph. These filters read commands to be sent to other filters in the filtergraph. `sendcmd` must be inserted between two video filters, `asendcmd` must be inserted between two audio filters, but apart from that they act the same way. The specification of commands can be provided in the filter arguments with the commands option, or in a file specified by the filename option. These filters accept the following options: commands, c Set the commands to be read and sent to the other filters. filename, f Set the filename of the commands to be read and sent to the other filters. #### 47.18.1 Commands syntax A commands description consists of a sequence of interval specifications, comprising a list of commands to be executed when a particular event related to that interval occurs. The occurring event is typically the current frame time entering or leaving a given time interval. An interval is specified by the following syntax: START\[-END\] COMMANDS; The time interval is specified by the START and END times. END is optional and defaults to the maximum time. The current frame time is considered within the specified interval if it is included in the interval \[START, END), that is when the time is greater or equal to START and is lesser than END. COMMANDS consists of a sequence of one or more command specifications, separated by ",", relating to that interval. The syntax of a command specification is given by: \[FLAGS\] TARGET COMMAND ARG FLAGS is optional and specifies the type of events relating to the time interval which enable sending the specified command, and must be a non-null sequence of identifier flags separated by "+" or "|" and enclosed between "\[" and "\]". The following flags are recognized: enter The command is sent when the current frame timestamp enters the specified interval. In other words, the command is sent when the previous frame timestamp was not in the given interval, and the current is. leave The command is sent when the current frame timestamp leaves the specified interval. In other words, the command is sent when the previous frame timestamp was in the given interval, and the current is not. expr The command ARG is interpreted as expression and result of expression is passed as ARG. The expression is evaluated through the eval API and can contain the following constants: POS Original position in the file of the frame, or undefined if undefined for the current frame. Deprecated, do not use. PTS The presentation timestamp in input. N The count of the input frame for video or audio, starting from 0. T The time in seconds of the current frame. TS The start time in seconds of the current command interval. TE The end time in seconds of the current command interval. TI The interpolated time of the current command interval, TI = (T - TS) / (TE - TS). W The video frame width. H The video frame height. If FLAGS is not specified, a default value of `[enter]` is assumed. TARGET specifies the target of the command, usually the name of the filter class or a specific filter instance name. COMMAND specifies the name of the command for the target filter. ARG is optional and specifies the optional list of argument for the given COMMAND. Between one interval specification and another, whitespaces, or sequences of characters starting with `#` until the end of line, are ignored and can be used to annotate comments. A simplified BNF description of the commands specification syntax follows: COMMAND\_FLAG ::= "enter" | "leave" COMMAND\_FLAGS ::= COMMAND\_FLAG \[(+|"|")COMMAND\_FLAG\] COMMAND ::= \["\[" COMMAND\_FLAGS "\]"\] TARGET COMMAND \[ARG\] COMMANDS ::= COMMAND \[,COMMANDS\] INTERVAL ::= START\[-END\] COMMANDS INTERVALS ::= INTERVAL\[;INTERVALS\] #### 47.18.2 Examples * Specify audio tempo change at second 4: asendcmd=c='4.0 atempo tempo 1.5',atempo * Target a specific filter instance: asendcmd=c='4.0 atempo@my tempo 1.5',atempo@my * Specify a list of drawtext and hue commands in a file. \# show text in the interval 5-10 5.0-10.0 \[enter\] drawtext reinit 'fontfile=FreeSerif.ttf:text=hello world', \[leave\] drawtext reinit 'fontfile=FreeSerif.ttf:text='; # desaturate the image in the interval 15-20 15.0-20.0 \[enter\] hue s 0, \[enter\] drawtext reinit 'fontfile=FreeSerif.ttf:text=nocolor', \[leave\] hue s 1, \[leave\] drawtext reinit 'fontfile=FreeSerif.ttf:text=color'; # apply an exponential saturation fade-out effect, starting from time 25 25 \[enter\] hue s exp(25-t) A filtergraph allowing to read and process the above command list stored in a file test.cmd, can be specified with: sendcmd=f=test.cmd,drawtext=fontfile=FreeSerif.ttf:text='',hue ### 47.19 setpts, asetpts Change the PTS (presentation timestamp) of the input frames. `setpts` works on video frames, `asetpts` on audio frames. This filter accepts the following options: expr The expression which is evaluated for each frame to construct its timestamp. strip\_fps (_video only_) Boolean option which determines if the original framerate metadata is unset. If set to true, be advised that a sane frame rate should be explicitly specified if output is sent to a constant frame rate muxer. Default is `false`. The expression is evaluated through the eval API and can contain the following constants: FRAME\_RATE, FR frame rate, only defined for constant frame-rate video PTS The presentation timestamp in input N The count of the input frame for video or the number of consumed samples, not including the current frame for audio, starting from 0. NB\_CONSUMED\_SAMPLES The number of consumed samples, not including the current frame (only audio) NB\_SAMPLES, S The number of samples in the current frame (only audio) SAMPLE\_RATE, SR The audio sample rate. STARTPTS The PTS of the first frame. STARTT the time in seconds of the first frame INTERLACED State whether the current frame is interlaced. T the time in seconds of the current frame POS original position in the file of the frame, or undefined if undefined for the current frame; deprecated, do not use PREV\_INPTS The previous input PTS. PREV\_INT previous input time in seconds PREV\_OUTPTS The previous output PTS. PREV\_OUTT previous output time in seconds RTCTIME The wallclock (RTC) time in microseconds. This is deprecated, use time(0) instead. RTCSTART The wallclock (RTC) time at the start of the movie in microseconds. TB The timebase of the input timestamps. T\_CHANGE Time of the first frame after command was applied or time of the first frame if no commands. #### 47.19.1 Examples * Start counting PTS from zero setpts=PTS-STARTPTS * Apply fast motion effect: setpts=0.5\*PTS * Apply slow motion effect: setpts=2.0\*PTS * Set fixed rate of 25 frames per second: setpts=N/(25\*TB) * Apply a random jitter effect of +/-100 TB units: setpts=PTS+randomi(0, -100\\,100) * Set fixed rate 25 fps with some jitter: setpts='1/(25\*TB) \* (N + 0.05 \* sin(N\*2\*PI/25))' * Apply an offset of 10 seconds to the input PTS: setpts=PTS+10/TB * Generate timestamps from a "live source" and rebase onto the current timebase: setpts='(RTCTIME - RTCSTART) / (TB \* 1000000)' * Generate timestamps by counting samples: asetpts=N/SR/TB #### 47.19.2 Commands Both filters support all above options as commands. ### 47.20 setrange Force color range for the output video frame. The `setrange` filter marks the color range property for the output frames. It does not change the input frame, but only sets the corresponding property, which affects how the frame is treated by following filters. The filter accepts the following options: range Available values are: ‘auto’ Keep the same color range property. ‘unspecified, unknown’ Set the color range as unspecified. ‘limited, tv, mpeg’ Set the color range as limited. ‘full, pc, jpeg’ Set the color range as full. ### 47.21 settb, asettb Set the timebase to use for the output frames timestamps. It is mainly useful for testing timebase configuration. It accepts the following parameters: expr, tb The expression which is evaluated into the output timebase. The value for tb is an arithmetic expression representing a rational. The expression can contain the constants "AVTB" (the default timebase), "intb" (the input timebase) and "sr" (the sample rate, audio only). Default value is "intb". #### 47.21.1 Examples * Set the timebase to 1/25: settb=expr=1/25 * Set the timebase to 1/10: settb=expr=0.1 * Set the timebase to 1001/1000: settb=1+0.001 * Set the timebase to 2\*intb: settb=2\*intb * Set the default timebase value: settb=AVTB ### 47.22 showcqt Convert input audio to a video output representing frequency spectrum logarithmically using Brown-Puckette constant Q transform algorithm with direct frequency domain coefficient calculation (but the transform itself is not really constant Q, instead the Q factor is actually variable/clamped), with musical tone scale, from E0 to D#10. The filter accepts the following options: size, s Specify the video size for the output. It must be even. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `1920x1080`. fps, rate, r Set the output frame rate. Default value is `25`. bar\_h Set the bargraph height. It must be even. Default value is `-1` which computes the bargraph height automatically. axis\_h Set the axis height. It must be even. Default value is `-1` which computes the axis height automatically. sono\_h Set the sonogram height. It must be even. Default value is `-1` which computes the sonogram height automatically. fullhd Set the fullhd resolution. This option is deprecated, use size, s instead. Default value is `1`. sono\_v, volume Specify the sonogram volume expression. It can contain variables: bar\_v the bar\_v evaluated expression frequency, freq, f the frequency where it is evaluated timeclamp, tc the value of timeclamp option and functions: a\_weighting(f) A-weighting of equal loudness b\_weighting(f) B-weighting of equal loudness c\_weighting(f) C-weighting of equal loudness. Default value is `16`. bar\_v, volume2 Specify the bargraph volume expression. It can contain variables: sono\_v the sono\_v evaluated expression frequency, freq, f the frequency where it is evaluated timeclamp, tc the value of timeclamp option and functions: a\_weighting(f) A-weighting of equal loudness b\_weighting(f) B-weighting of equal loudness c\_weighting(f) C-weighting of equal loudness. Default value is `sono_v`. sono\_g, gamma Specify the sonogram gamma. Lower gamma makes the spectrum more contrast, higher gamma makes the spectrum having more range. Default value is `3`. Acceptable range is `[1, 7]`. bar\_g, gamma2 Specify the bargraph gamma. Default value is `1`. Acceptable range is `[1, 7]`. bar\_t Specify the bargraph transparency level. Lower value makes the bargraph sharper. Default value is `1`. Acceptable range is `[0, 1]`. timeclamp, tc Specify the transform timeclamp. At low frequency, there is trade-off between accuracy in time domain and frequency domain. If timeclamp is lower, event in time domain is represented more accurately (such as fast bass drum), otherwise event in frequency domain is represented more accurately (such as bass guitar). Acceptable range is `[0.002, 1]`. Default value is `0.17`. attack Set attack time in seconds. The default is `0` (disabled). Otherwise, it limits future samples by applying asymmetric windowing in time domain, useful when low latency is required. Accepted range is `[0, 1]`. basefreq Specify the transform base frequency. Default value is `20.01523126408007475`, which is frequency 50 cents below E0. Acceptable range is `[10, 100000]`. endfreq Specify the transform end frequency. Default value is `20495.59681441799654`, which is frequency 50 cents above D#10. Acceptable range is `[10, 100000]`. coeffclamp This option is deprecated and ignored. tlength Specify the transform length in time domain. Use this option to control accuracy trade-off between time domain and frequency domain at every frequency sample. It can contain variables: frequency, freq, f the frequency where it is evaluated timeclamp, tc the value of timeclamp option. Default value is `384*tc/(384+tc*f)`. count Specify the transform count for every video frame. Default value is `6`. Acceptable range is `[1, 30]`. fcount Specify the transform count for every single pixel. Default value is `0`, which makes it computed automatically. Acceptable range is `[0, 10]`. fontfile Specify font file for use with freetype to draw the axis. If not specified, use embedded font. Note that drawing with font file or embedded font is not implemented with custom basefreq and endfreq, use axisfile option instead. font Specify fontconfig pattern. This has lower priority than fontfile. The `:` in the pattern may be replaced by `|` to avoid unnecessary escaping. fontcolor Specify font color expression. This is arithmetic expression that should return integer value 0xRRGGBB. It can contain variables: frequency, freq, f the frequency where it is evaluated timeclamp, tc the value of timeclamp option and functions: midi(f) midi number of frequency f, some midi numbers: E0(16), C1(24), C2(36), A4(69) r(x), g(x), b(x) red, green, and blue value of intensity x. Default value is `st(0, (midi(f)-59.5)/12); st(1, if(between(ld(0),0,1), 0.5-0.5*cos(2*PI*ld(0)), 0)); r(1-ld(1)) + b(ld(1))`. axisfile Specify image file to draw the axis. This option override fontfile and fontcolor option. axis, text Enable/disable drawing text to the axis. If it is set to `0`, drawing to the axis is disabled, ignoring fontfile and axisfile option. Default value is `1`. csp Set colorspace. The accepted values are: ‘unspecified’ Unspecified (default) ‘bt709’ BT.709 ‘fcc’ FCC ‘bt470bg’ BT.470BG or BT.601-6 625 ‘smpte170m’ SMPTE-170M or BT.601-6 525 ‘smpte240m’ SMPTE-240M ‘bt2020ncl’ BT.2020 with non-constant luminance cscheme Set spectrogram color scheme. This is list of floating point values with format `left_r|left_g|left_b|right_r|right_g|right_b`. The default is `1|0.5|0|0|0.5|1`. #### 47.22.1 Examples * Playing audio while showing the spectrum: ffplay -f lavfi 'amovie=a.mp3, asplit \[a\]\[out1\]; \[a\] showcqt \[out0\]' * Same as above, but with frame rate 30 fps: ffplay -f lavfi 'amovie=a.mp3, asplit \[a\]\[out1\]; \[a\] showcqt=fps=30:count=5 \[out0\]' * Playing at 1280x720: ffplay -f lavfi 'amovie=a.mp3, asplit \[a\]\[out1\]; \[a\] showcqt=s=1280x720:count=4 \[out0\]' * Disable sonogram display: sono\_h=0 * A1 and its harmonics: A1, A2, (near)E3, A3: ffplay -f lavfi 'aevalsrc=0.1\*sin(2\*PI\*55\*t)+0.1\*sin(4\*PI\*55\*t)+0.1\*sin(6\*PI\*55\*t)+0.1\*sin(8\*PI\*55\*t), asplit\[a\]\[out1\]; \[a\] showcqt \[out0\]' * Same as above, but with more accuracy in frequency domain: ffplay -f lavfi 'aevalsrc=0.1\*sin(2\*PI\*55\*t)+0.1\*sin(4\*PI\*55\*t)+0.1\*sin(6\*PI\*55\*t)+0.1\*sin(8\*PI\*55\*t), asplit\[a\]\[out1\]; \[a\] showcqt=timeclamp=0.5 \[out0\]' * Custom volume: bar\_v=10:sono\_v=bar\_v\*a\_weighting(f) * Custom gamma, now spectrum is linear to the amplitude. bar\_g=2:sono\_g=2 * Custom tlength equation: tc=0.33:tlength='st(0,0.17); 384\*tc / (384 / ld(0) + tc\*f /(1-ld(0))) + 384\*tc / (tc\*f / ld(0) + 384 /(1-ld(0)))' * Custom fontcolor and fontfile, C-note is colored green, others are colored blue: fontcolor='if(mod(floor(midi(f)+0.5),12), 0x0000FF, g(1))':fontfile=myfont.ttf * Custom font using fontconfig: font='Courier New,Monospace,mono|bold' * Custom frequency range with custom axis using image file: axisfile=myaxis.png:basefreq=40:endfreq=10000 ### 47.23 showcwt Convert input audio to video output representing frequency spectrum using Continuous Wavelet Transform and Morlet wavelet. The filter accepts the following options: size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `640x512`. rate, r Set the output frame rate. Default value is `25`. scale Set the frequency scale used. Allowed values are: linear log bark mel erbs sqrt cbrt qdrt fm Default value is `linear`. iscale Set the intensity scale used. Allowed values are: linear log sqrt cbrt qdrt Default value is `log`. min Set the minimum frequency that will be used in output. Default is `20` Hz. max Set the maximum frequency that will be used in output. Default is `20000` Hz. The real frequency upper limit depends on input audio’s sample rate and such will be enforced on this value when it is set to value greater than Nyquist frequency. imin Set the minimum intensity that will be used in output. imax Set the maximum intensity that will be used in output. logb Set the logarithmic basis for brightness strength when mapping calculated magnitude values to pixel values. Allowed range is from `0` to `1`. Default value is `0.0001`. deviation Set the frequency deviation. Lower values than `1` are more frequency oriented, while higher values than `1` are more time oriented. Allowed range is from `0` to `10`. Default value is `1`. pps Set the number of pixel output per each second in one row. Allowed range is from `1` to `1024`. Default value is `64`. mode Set the output visual mode. Allowed values are: magnitude Show magnitude. phase Show only phase. magphase Show combination of magnitude and phase. Magnitude is mapped to brightness and phase to color. channel Show unique color per channel magnitude. stereo Show unique color per stereo difference. Default value is `magnitude`. slide Set the output slide method. Allowed values are: replace scroll frame direction Set the direction method for output slide method. Allowed values are: lr Direction from left to right. rl Direction from right to left. ud Direction from up to down. du Direction from down to up. bar Set the ratio of bargraph display to display size. Default is 0. rotation Set color rotation, must be in \[-1.0, 1.0\] range. Default value is `0`. ### 47.24 showfreqs Convert input audio to video output representing the audio power spectrum. Audio amplitude is on Y-axis while frequency is on X-axis. The filter accepts the following options: size, s Specify size of video. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default is `1024x512`. rate, r Set video rate. Default is `25`. mode Set display mode. This set how each frequency bin will be represented. It accepts the following values: ‘line’ ‘bar’ ‘dot’ Default is `bar`. ascale Set amplitude scale. It accepts the following values: ‘lin’ Linear scale. ‘sqrt’ Square root scale. ‘cbrt’ Cubic root scale. ‘log’ Logarithmic scale. Default is `log`. fscale Set frequency scale. It accepts the following values: ‘lin’ Linear scale. ‘log’ Logarithmic scale. ‘rlog’ Reverse logarithmic scale. Default is `lin`. win\_size Set window size. Allowed range is from 16 to 65536. Default is `2048` win\_func Set windowing function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default is `hanning`. overlap Set window overlap. In range `[0, 1]`. Default is `1`, which means optimal overlap for selected window function will be picked. averaging Set time averaging. Setting this to 0 will display current maximal peaks. Default is `1`, which means time averaging is disabled. colors Specify list of colors separated by space or by ’|’ which will be used to draw channel frequencies. Unrecognized or missing colors will be replaced by white color. cmode Set channel display mode. It accepts the following values: ‘combined’ ‘separate’ Default is `combined`. minamp Set minimum amplitude used in `log` amplitude scaler. data Set data display mode. It accepts the following values: ‘magnitude’ ‘phase’ ‘delay’ Default is `magnitude`. channels Set channels to use when processing audio. By default all are processed. ### 47.25 showspatial Convert stereo input audio to a video output, representing the spatial relationship between two channels. The filter accepts the following options: size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `512x512`. win\_size Set window size. Allowed range is from 1024 to 65536. Default size is 4096. win\_func Set window function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hann’ ‘hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default value is `hann`. rate, r Set output framerate. ### 47.26 showspectrum Convert input audio to a video output, representing the audio frequency spectrum. The filter accepts the following options: size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `640x512`. slide Specify how the spectrum should slide along the window. It accepts the following values: ‘replace’ the samples start again on the left when they reach the right ‘scroll’ the samples scroll from right to left ‘fullframe’ frames are only produced when the samples reach the right ‘rscroll’ the samples scroll from left to right ‘lreplace’ the samples start again on the right when they reach the left Default value is `replace`. mode Specify display mode. It accepts the following values: ‘combined’ all channels are displayed in the same row ‘separate’ all channels are displayed in separate rows Default value is ‘combined’. color Specify display color mode. It accepts the following values: ‘channel’ each channel is displayed in a separate color ‘intensity’ each channel is displayed using the same color scheme ‘rainbow’ each channel is displayed using the rainbow color scheme ‘moreland’ each channel is displayed using the moreland color scheme ‘nebulae’ each channel is displayed using the nebulae color scheme ‘fire’ each channel is displayed using the fire color scheme ‘fiery’ each channel is displayed using the fiery color scheme ‘fruit’ each channel is displayed using the fruit color scheme ‘cool’ each channel is displayed using the cool color scheme ‘magma’ each channel is displayed using the magma color scheme ‘green’ each channel is displayed using the green color scheme ‘viridis’ each channel is displayed using the viridis color scheme ‘plasma’ each channel is displayed using the plasma color scheme ‘cividis’ each channel is displayed using the cividis color scheme ‘terrain’ each channel is displayed using the terrain color scheme Default value is ‘channel’. scale Specify scale used for calculating intensity color values. It accepts the following values: ‘lin’ linear ‘sqrt’ square root, default ‘cbrt’ cubic root ‘log’ logarithmic ‘4thrt’ 4th root ‘5thrt’ 5th root Default value is ‘sqrt’. fscale Specify frequency scale. It accepts the following values: ‘lin’ linear ‘log’ logarithmic Default value is ‘lin’. saturation Set saturation modifier for displayed colors. Negative values provide alternative color scheme. `0` is no saturation at all. Saturation must be in \[-10.0, 10.0\] range. Default value is `1`. win\_func Set window function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hann’ ‘hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default value is `hann`. orientation Set orientation of time vs frequency axis. Can be `vertical` or `horizontal`. Default is `vertical`. overlap Set ratio of overlap window. Default value is `0`. When value is `1` overlap is set to recommended size for specific window function currently used. gain Set scale gain for calculating intensity color values. Default value is `1`. data Set which data to display. Can be `magnitude`, default or `phase`, or unwrapped phase: `uphase`. rotation Set color rotation, must be in \[-1.0, 1.0\] range. Default value is `0`. start Set start frequency from which to display spectrogram. Default is `0`. stop Set stop frequency to which to display spectrogram. Default is `0`. fps Set upper frame rate limit. Default is `auto`, unlimited. legend Draw time and frequency axes and legends. Default is disabled. drange Set dynamic range used to calculate intensity color values. Default is 120 dBFS. Allowed range is from 10 to 200. limit Set upper limit of input audio samples volume in dBFS. Default is 0 dBFS. Allowed range is from -100 to 100. opacity Set opacity strength when using pixel format output with alpha component. The usage is very similar to the showwaves filter; see the examples in that section. #### 47.26.1 Examples * Large window with logarithmic color scaling: showspectrum=s=1280x480:scale=log * Complete example for a colored and sliding spectrum per channel using `ffplay`: ffplay -f lavfi 'amovie=input.mp3, asplit \[a\]\[out1\]; \[a\] showspectrum=mode=separate:color=intensity:slide=1:scale=cbrt \[out0\]' ### 47.27 showspectrumpic Convert input audio to a single video frame, representing the audio frequency spectrum. The filter accepts the following options: size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `4096x2048`. mode Specify display mode. It accepts the following values: ‘combined’ all channels are displayed in the same row ‘separate’ all channels are displayed in separate rows Default value is ‘combined’. color Specify display color mode. It accepts the following values: ‘channel’ each channel is displayed in a separate color ‘intensity’ each channel is displayed using the same color scheme ‘rainbow’ each channel is displayed using the rainbow color scheme ‘moreland’ each channel is displayed using the moreland color scheme ‘nebulae’ each channel is displayed using the nebulae color scheme ‘fire’ each channel is displayed using the fire color scheme ‘fiery’ each channel is displayed using the fiery color scheme ‘fruit’ each channel is displayed using the fruit color scheme ‘cool’ each channel is displayed using the cool color scheme ‘magma’ each channel is displayed using the magma color scheme ‘green’ each channel is displayed using the green color scheme ‘viridis’ each channel is displayed using the viridis color scheme ‘plasma’ each channel is displayed using the plasma color scheme ‘cividis’ each channel is displayed using the cividis color scheme ‘terrain’ each channel is displayed using the terrain color scheme Default value is ‘intensity’. scale Specify scale used for calculating intensity color values. It accepts the following values: ‘lin’ linear ‘sqrt’ square root, default ‘cbrt’ cubic root ‘log’ logarithmic ‘4thrt’ 4th root ‘5thrt’ 5th root Default value is ‘log’. fscale Specify frequency scale. It accepts the following values: ‘lin’ linear ‘log’ logarithmic Default value is ‘lin’. saturation Set saturation modifier for displayed colors. Negative values provide alternative color scheme. `0` is no saturation at all. Saturation must be in \[-10.0, 10.0\] range. Default value is `1`. win\_func Set window function. It accepts the following values: ‘rect’ ‘bartlett’ ‘hann’ ‘hanning’ ‘hamming’ ‘blackman’ ‘welch’ ‘flattop’ ‘bharris’ ‘bnuttall’ ‘bhann’ ‘sine’ ‘nuttall’ ‘lanczos’ ‘gauss’ ‘tukey’ ‘dolph’ ‘cauchy’ ‘parzen’ ‘poisson’ ‘bohman’ ‘kaiser’ Default value is `hann`. orientation Set orientation of time vs frequency axis. Can be `vertical` or `horizontal`. Default is `vertical`. gain Set scale gain for calculating intensity color values. Default value is `1`. legend Draw time and frequency axes and legends. Default is enabled. rotation Set color rotation, must be in \[-1.0, 1.0\] range. Default value is `0`. start Set start frequency from which to display spectrogram. Default is `0`. stop Set stop frequency to which to display spectrogram. Default is `0`. drange Set dynamic range used to calculate intensity color values. Default is 120 dBFS. Allowed range is from 10 to 200. limit Set upper limit of input audio samples volume in dBFS. Default is 0 dBFS. Allowed range is from -100 to 100. opacity Set opacity strength when using pixel format output with alpha component. #### 47.27.1 Examples * Extract an audio spectrogram of a whole audio track in a 1024x1024 picture using `ffmpeg`: ffmpeg -i audio.flac -lavfi showspectrumpic=s=1024x1024 spectrogram.png ### 47.28 showvolume Convert input audio volume to a video output. The filter accepts the following options: rate, r Set video rate. b Set border width, allowed range is \[0, 5\]. Default is 1. w Set channel width, allowed range is \[80, 8192\]. Default is 400. h Set channel height, allowed range is \[1, 900\]. Default is 20. f Set fade, allowed range is \[0, 1\]. Default is 0.95. c Set volume color expression. The expression can use the following variables: VOLUME Current max volume of channel in dB. PEAK Current peak. CHANNEL Current channel number, starting from 0. t If set, displays channel names. Default is enabled. v If set, displays volume values. Default is enabled. o Set orientation, can be horizontal: `h` or vertical: `v`, default is `h`. s Set step size, allowed range is \[0, 5\]. Default is 0, which means step is disabled. p Set background opacity, allowed range is \[0, 1\]. Default is 0. m Set metering mode, can be peak: `p` or rms: `r`, default is `p`. ds Set display scale, can be linear: `lin` or log: `log`, default is `lin`. dm In second. If set to > 0., display a line for the max level in the previous seconds. default is disabled: `0.` dmc The color of the max line. Use when `dm` option is set to > 0. default is: `orange` ### 47.29 showwaves Convert input audio to a video output, representing the samples waves. The filter accepts the following options: size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `600x240`. mode Set display mode. Available values are: ‘point’ Draw a point for each sample. ‘line’ Draw a vertical line for each sample. ‘p2p’ Draw a point for each sample and a line between them. ‘cline’ Draw a centered vertical line for each sample. Default value is `point`. n Set the number of samples which are printed on the same column. A larger value will decrease the frame rate. Must be a positive integer. This option can be set only if the value for rate is not explicitly specified. rate, r Set the (approximate) output frame rate. This is done by setting the option n. Default value is "25". split\_channels Set if channels should be drawn separately or overlap. Default value is 0. colors Set colors separated by ’|’ which are going to be used for drawing of each channel. scale Set amplitude scale. Available values are: ‘lin’ Linear. ‘log’ Logarithmic. ‘sqrt’ Square root. ‘cbrt’ Cubic root. Default is linear. draw Set the draw mode. This is mostly useful to set for high n. Available values are: ‘scale’ Scale pixel values for each drawn sample. ‘full’ Draw every sample directly. Default value is `scale`. #### 47.29.1 Examples * Output the input file audio and the corresponding video representation at the same time: amovie=a.mp3,asplit\[out0\],showwaves\[out1\] * Create a synthetic signal and show it with showwaves, forcing a frame rate of 30 frames per second: aevalsrc=sin(1\*2\*PI\*t)\*sin(880\*2\*PI\*t):cos(2\*PI\*200\*t),asplit\[out0\],showwaves=r=30\[out1\] ### 47.30 showwavespic Convert input audio to a single video frame, representing the samples waves. The filter accepts the following options: size, s Specify the video size for the output. For the syntax of this option, check the (ffmpeg-utils)"Video size" section in the ffmpeg-utils manual. Default value is `600x240`. split\_channels Set if channels should be drawn separately or overlap. Default value is 0. colors Set colors separated by ’|’ which are going to be used for drawing of each channel. scale Set amplitude scale. Available values are: ‘lin’ Linear. ‘log’ Logarithmic. ‘sqrt’ Square root. ‘cbrt’ Cubic root. Default is linear. draw Set the draw mode. Available values are: ‘scale’ Scale pixel values for each drawn sample. ‘full’ Draw every sample directly. Default value is `scale`. filter Set the filter mode. Available values are: ‘average’ Use average samples values for each drawn sample. ‘peak’ Use peak samples values for each drawn sample. Default value is `average`. #### 47.30.1 Examples * Extract a channel split representation of the wave form of a whole audio track in a 1024x800 picture using `ffmpeg`: ffmpeg -i audio.flac -lavfi showwavespic=split\_channels=1:s=1024x800 waveform.png ### 47.31 sidedata, asidedata Delete frame side data, or select frames based on it. This filter accepts the following options: mode Set mode of operation of the filter. Can be one of the following: ‘select’ Select every frame with side data of `type`. ‘delete’ Delete side data of `type`. If `type` is not set, delete all side data in the frame. type Set side data type used with all modes. Must be set for `select` mode. For the list of frame side data types, refer to the `AVFrameSideDataType` enum in libavutil/frame.h. For example, to choose `AV_FRAME_DATA_PANSCAN` side data, you must specify `PANSCAN`. ### 47.32 spectrumsynth Synthesize audio from 2 input video spectrums, first input stream represents magnitude across time and second represents phase across time. The filter will transform from frequency domain as displayed in videos back to time domain as presented in audio output. This filter is primarily created for reversing processed showspectrum filter outputs, but can synthesize sound from other spectrograms too. But in such case results are going to be poor if the phase data is not available, because in such cases phase data need to be recreated, usually it’s just recreated from random noise. For best results use gray only output (`channel` color mode in showspectrum filter) and `log` scale for magnitude video and `lin` scale for phase video. To produce phase, for 2nd video, use `data` option. Inputs videos should generally use `fullframe` slide mode as that saves resources needed for decoding video. The filter accepts the following options: sample\_rate Specify sample rate of output audio, the sample rate of audio from which spectrum was generated may differ. channels Set number of channels represented in input video spectrums. scale Set scale which was used when generating magnitude input spectrum. Can be `lin` or `log`. Default is `log`. slide Set slide which was used when generating inputs spectrums. Can be `replace`, `scroll`, `fullframe` or `rscroll`. Default is `fullframe`. win\_func Set window function used for resynthesis. overlap Set window overlap. In range `[0, 1]`. Default is `1`, which means optimal overlap for selected window function will be picked. orientation Set orientation of input videos. Can be `vertical` or `horizontal`. Default is `vertical`. #### 47.32.1 Examples * First create magnitude and phase videos from audio, assuming audio is stereo with 44100 sample rate, then resynthesize videos back to audio with spectrumsynth: ffmpeg -i input.flac -lavfi showspectrum=mode=separate:scale=log:overlap=0.875:color=channel:slide=fullframe:data=magnitude -an -c:v rawvideo magnitude.nut ffmpeg -i input.flac -lavfi showspectrum=mode=separate:scale=lin:overlap=0.875:color=channel:slide=fullframe:data=phase -an -c:v rawvideo phase.nut ffmpeg -i magnitude.nut -i phase.nut -lavfi spectrumsynth=channels=2:sample\_rate=44100:win\_func=hann:overlap=0.875:slide=fullframe output.flac ### 47.33 split, asplit Split input into several identical outputs. `asplit` works with audio input, `split` with video. The filter accepts a single parameter which specifies the number of outputs. If unspecified, it defaults to 2. #### 47.33.1 Examples * Create two separate outputs from the same input: \[in\] split \[out0\]\[out1\] * To create 3 or more outputs, you need to specify the number of outputs, like in: \[in\] asplit=3 \[out0\]\[out1\]\[out2\] * Create two separate outputs from the same input, one cropped and one padded: \[in\] split \[splitout1\]\[splitout2\]; \[splitout1\] crop=100:100:0:0 \[cropout\]; \[splitout2\] pad=200:200:100:100 \[padout\]; * Create 5 copies of the input audio with `ffmpeg`: ffmpeg -i INPUT -filter\_complex asplit=5 OUTPUT ### 47.34 zmq, azmq Receive commands sent through a libzmq client, and forward them to filters in the filtergraph. `zmq` and `azmq` work as a pass-through filters. `zmq` must be inserted between two video filters, `azmq` between two audio filters. Both are capable to send messages to any filter type. To enable these filters you need to install the libzmq library and headers and configure FFmpeg with `--enable-libzmq`. For more information about libzmq see: http://www.zeromq.org/ The `zmq` and `azmq` filters work as a libzmq server, which receives messages sent through a network interface defined by the bind\_address (or the abbreviation "b") option. Default value of this option is tcp://localhost:5555. You may want to alter this value to your needs, but do not forget to escape any ’:’ signs (see filtergraph escaping). The received message must be in the form: TARGET COMMAND \[ARG\] TARGET specifies the target of the command, usually the name of the filter class or a specific filter instance name. The default filter instance name uses the pattern ‘Parsed\_<filter\_name>\_<index>’, but you can override this by using the ‘filter\_name@id’ syntax (see Filtergraph syntax). COMMAND specifies the name of the command for the target filter. ARG is optional and specifies the optional argument list for the given COMMAND. Upon reception, the message is processed and the corresponding command is injected into the filtergraph. Depending on the result, the filter will send a reply to the client, adopting the format: ERROR\_CODE ERROR\_REASON MESSAGE MESSAGE is optional. #### 47.34.1 Examples Look at tools/zmqsend for an example of a zmq client which can be used to send commands processed by these filters. Consider the following filtergraph generated by `ffplay`. In this example the last overlay filter has an instance name. All other filters will have default instance names. ffplay -dumpgraph 1 -f lavfi " color=s=100x100:c=red \[l\]; color=s=100x100:c=blue \[r\]; nullsrc=s=200x100, zmq \[bg\]; \[bg\]\[l\] overlay \[bg+l\]; \[bg+l\]\[r\] overlay@my=x=100 " To change the color of the left side of the video, the following command can be used: echo Parsed\_color\_0 c yellow | tools/zmqsend To change the right side: echo Parsed\_color\_1 c pink | tools/zmqsend To change the position of the right side: echo overlay@my x 150 | tools/zmqsend ## 48 Multimedia Sources Below is a description of the currently available multimedia sources. ### 48.1 amovie This is the same as movie source, except it selects an audio stream by default. ### 48.2 avsynctest Generate an Audio/Video Sync Test. Generated stream periodically shows flash video frame and emits beep in audio. Useful to inspect A/V sync issues. It accepts the following options: size, s Set output video size. Default value is `hd720`. framerate, fr Set output video frame rate. Default value is `30`. samplerate, sr Set output audio sample rate. Default value is `44100`. amplitude, a Set output audio beep amplitude. Default value is `0.7`. period, p Set output audio beep period in seconds. Default value is `3`. delay, dl Set output video flash delay in number of frames. Default value is `0`. cycle, c Enable cycling of video delays, by default is disabled. duration, d Set stream output duration. By default duration is unlimited. fg, bg, ag Set foreground/background/additional color. #### 48.2.1 Commands This source supports the some above options as commands. ### 48.3 movie Read audio and/or video stream(s) from a movie container. It accepts the following parameters: filename The name of the resource to read (not necessarily a file; it can also be a device or a stream accessed through some protocol). format\_name, f Specifies the format assumed for the movie to read, and can be either the name of a container or an input device. If not specified, the format is guessed from movie\_name or by probing. seek\_point, sp Specifies the seek point in seconds. The frames will be output starting from this seek point. The parameter is evaluated with `av_strtod`, so the numerical value may be suffixed by an IS postfix. The default value is "0". streams, s Specifies the streams to read. Several streams can be specified, separated by "+". The source will then have as many outputs, in the same order. The syntax is explained in the (ffmpeg)"Stream specifiers" section in the ffmpeg manual. Two special names, "dv" and "da" specify respectively the default (best suited) video and audio stream. Default is "dv", or "da" if the filter is called as "amovie". stream\_index, si Specifies the index of the video stream to read. If the value is -1, the most suitable video stream will be automatically selected. The default value is "-1". Deprecated. If the filter is called "amovie", it will select audio instead of video. loop Specifies how many times to read the stream in sequence. If the value is 0, the stream will be looped infinitely. Default value is "1". Note that when the movie is looped the source timestamps are not changed, so it will generate non monotonically increasing timestamps. discontinuity Specifies the time difference between frames above which the point is considered a timestamp discontinuity which is removed by adjusting the later timestamps. dec\_threads Specifies the number of threads for decoding format\_opts Specify format options for the opened file. Format options can be specified as a list of key\=value pairs separated by ’:’. The following example shows how to add protocol\_whitelist and protocol\_blacklist options: ffplay -f lavfi "movie=filename='1.sdp':format\_opts='protocol\_whitelist=file,rtp,udp\\:protocol\_blacklist=http'" It allows overlaying a second video on top of the main input of a filtergraph, as shown in this graph: input -----------> deltapts0 --> overlay --> output ^ | movie --> scale--> deltapts1 -------+ #### 48.3.1 Examples * Skip 3.2 seconds from the start of the AVI file in.avi, and overlay it on top of the input labelled "in": movie=in.avi:seek\_point=3.2, scale=180:-1, setpts=PTS-STARTPTS \[over\]; \[in\] setpts=PTS-STARTPTS \[main\]; \[main\]\[over\] overlay=16:16 \[out\] * Read from a video4linux2 device, and overlay it on top of the input labelled "in": movie=/dev/video0:f=video4linux2, scale=180:-1, setpts=PTS-STARTPTS \[over\]; \[in\] setpts=PTS-STARTPTS \[main\]; \[main\]\[over\] overlay=16:16 \[out\] * Read the first video stream and the audio stream with id 0x81 from dvd.vob; the video is connected to the pad named "video" and the audio is connected to the pad named "audio": movie=dvd.vob:s=v:0+#0x81 \[video\] \[audio\] #### 48.3.2 Commands Both movie and amovie support the following commands: seek Perform seek using "av\_seek\_frame". The syntax is: seek stream\_index|timestamp|flags * stream\_index: If stream\_index is -1, a default stream is selected, and timestamp is automatically converted from AV\_TIME\_BASE units to the stream specific time\_base. * timestamp: Timestamp in AVStream.time\_base units or, if no stream is specified, in AV\_TIME\_BASE units. * flags: Flags which select direction and seeking mode. get\_duration Get movie duration in AV\_TIME\_BASE units. ## 49 External libraries FFmpeg can be hooked up with a number of external libraries to add support for more formats. None of them are used by default, their use has to be explicitly requested by passing the appropriate flags to `./configure`. ### 49.1 Alliance for Open Media (AOM) FFmpeg can make use of the AOM library for AV1 decoding and encoding. Go to http://aomedia.org/ and follow the instructions for installing the library. Then pass `--enable-libaom` to configure to enable it. ### 49.2 AMD AMF/VCE FFmpeg can use the AMD Advanced Media Framework library for accelerated H.264 and HEVC(only windows) encoding on hardware with Video Coding Engine (VCE). To enable support you must obtain the AMF framework header files(version 1.4.9+) from https://github.com/GPUOpen-LibrariesAndSDKs/AMF.git. Create an `AMF/` directory in the system include path. Copy the contents of `AMF/amf/public/include/` into that directory. Then configure FFmpeg with `--enable-amf`. Initialization of amf encoder occurs in this order: 1) trying to initialize through dx11(only windows) 2) trying to initialize through dx9(only windows) 3) trying to initialize through vulkan To use h.264(AMD VCE) encoder on linux amdgru-pro version 19.20+ and amf-amdgpu-pro package(amdgru-pro contains, but does not install automatically) are required. This driver can be installed using amdgpu-pro-install script in official amd driver archive. ### 49.3 AviSynth FFmpeg can read AviSynth scripts as input. To enable support, pass `--enable-avisynth` to configure after installing the headers provided by AviSynth+. AviSynth+ can be configured to install only the headers by either passing `-DHEADERS_ONLY:bool=on` to the normal CMake-based build system, or by using the supplied `GNUmakefile`. For Windows, supported AviSynth variants are AviSynth 2.6 RC1 or higher for 32-bit builds and AviSynth+ r1718 or higher for 32-bit and 64-bit builds. For Linux, macOS, and BSD, the only supported AviSynth variant is AviSynth+, starting with version 3.5. In 2016, AviSynth+ added support for building with GCC. However, due to the eccentricities of Windows’ calling conventions, 32-bit GCC builds of AviSynth+ are not compatible with typical 32-bit builds of FFmpeg. By default, FFmpeg assumes compatibility with 32-bit MSVC builds of AviSynth+ since that is the most widely-used and entrenched build configuration. Users can override this and enable support for 32-bit GCC builds of AviSynth+ by passing `-DAVSC_WIN32_GCC32` to `--extra-cflags` when configuring FFmpeg. 64-bit builds of FFmpeg are not affected, and can use either MSVC or GCC builds of AviSynth+ without any special flags. AviSynth(+) is loaded dynamically. Distributors can build FFmpeg with `--enable-avisynth`, and the binaries will work regardless of the end user having AviSynth installed. If/when an end user would like to use AviSynth scripts, then they can install AviSynth(+) and FFmpeg will be able to find and use it to open scripts. ### 49.4 Chromaprint FFmpeg can make use of the Chromaprint library for generating audio fingerprints. Pass `--enable-chromaprint` to configure to enable it. See https://acoustid.org/chromaprint. ### 49.5 codec2 FFmpeg can make use of the codec2 library for codec2 decoding and encoding. There is currently no native decoder, so libcodec2 must be used for decoding. Go to http://freedv.org/, download "Codec 2 source archive". Build and install using CMake. Debian users can install the libcodec2-dev package instead. Once libcodec2 is installed you can pass `--enable-libcodec2` to configure to enable it. The easiest way to use codec2 is with .c2 files, since they contain the mode information required for decoding. To encode such a file, use a .c2 file extension and give the libcodec2 encoder the -mode option: `ffmpeg -i input.wav -mode 700C output.c2`. Playback is as simple as `ffplay output.c2`. For a list of supported modes, run `ffmpeg -h encoder=libcodec2`. Raw codec2 files are also supported. To make sense of them the mode in use needs to be specified as a format option: `ffmpeg -f codec2raw -mode 1300 -i input.raw output.wav`. ### 49.6 dav1d FFmpeg can make use of the dav1d library for AV1 video decoding. Go to https://code.videolan.org/videolan/dav1d and follow the instructions for installing the library. Then pass `--enable-libdav1d` to configure to enable it. ### 49.7 davs2 FFmpeg can make use of the davs2 library for AVS2-P2/IEEE1857.4 video decoding. Go to https://github.com/pkuvcl/davs2 and follow the instructions for installing the library. Then pass `--enable-libdavs2` to configure to enable it. ### 49.8 uavs3d FFmpeg can make use of the uavs3d library for AVS3-P2/IEEE1857.10 video decoding. Go to https://github.com/uavs3/uavs3d and follow the instructions for installing the library. Then pass `--enable-libuavs3d` to configure to enable it. ### 49.9 Game Music Emu FFmpeg can make use of the Game Music Emu library to read audio from supported video game music file formats. Pass `--enable-libgme` to configure to enable it. See https://bitbucket.org/mpyne/game-music-emu/overview. ### 49.10 Intel QuickSync Video FFmpeg can use Intel QuickSync Video (QSV) for accelerated decoding and encoding of multiple codecs. To use QSV, FFmpeg must be linked against the `libmfx` dispatcher, which loads the actual decoding libraries. The dispatcher is open source and can be downloaded from https://github.com/lu-zero/mfx\_dispatch.git. FFmpeg needs to be configured with the `--enable-libmfx` option and `pkg-config` needs to be able to locate the dispatcher’s `.pc` files. ### 49.11 Kvazaar FFmpeg can make use of the Kvazaar library for HEVC encoding. Go to https://github.com/ultravideo/kvazaar and follow the instructions for installing the library. Then pass `--enable-libkvazaar` to configure to enable it. ### 49.12 LAME FFmpeg can make use of the LAME library for MP3 encoding. Go to http://lame.sourceforge.net/ and follow the instructions for installing the library. Then pass `--enable-libmp3lame` to configure to enable it. ### 49.13 LCEVCdec FFmpeg can make use of the liblcevc\_dec library for LCEVC enhacement layer decoding on supported bitstreams. Go to https://github.com/v-novaltd/LCEVCdec and follow the instructions for installing the library. Then pass `--enable-liblcevc-dec` to configure to enable it. LCEVCdec is under the BSD-3-Clause-Clear License. ### 49.14 libilbc iLBC is a narrowband speech codec that has been made freely available by Google as part of the WebRTC project. libilbc is a packaging friendly copy of the iLBC codec. FFmpeg can make use of the libilbc library for iLBC decoding and encoding. Go to https://github.com/TimothyGu/libilbc and follow the instructions for installing the library. Then pass `--enable-libilbc` to configure to enable it. ### 49.15 libjxl JPEG XL is an image format intended to fully replace legacy JPEG for an extended period of life. See https://jpegxl.info/ for more information, and see https://github.com/libjxl/libjxl for the library source. You can pass `--enable-libjxl` to configure in order enable the libjxl wrapper. ### 49.16 libvpx FFmpeg can make use of the libvpx library for VP8/VP9 decoding and encoding. Go to http://www.webmproject.org/ and follow the instructions for installing the library. Then pass `--enable-libvpx` to configure to enable it. ### 49.17 ModPlug FFmpeg can make use of this library, originating in Modplug-XMMS, to read from MOD-like music files. See https://github.com/Konstanty/libmodplug. Pass `--enable-libmodplug` to configure to enable it. ### 49.18 OpenCORE, VisualOn, and Fraunhofer libraries Spun off Google Android sources, OpenCore, VisualOn and Fraunhofer libraries provide encoders for a number of audio codecs. OpenCORE and VisualOn libraries are under the Apache License 2.0 (see http://www.apache.org/licenses/LICENSE-2.0 for details), which is incompatible to the LGPL version 2.1 and GPL version 2. You have to upgrade FFmpeg’s license to LGPL version 3 (or if you have enabled GPL components, GPL version 3) by passing `--enable-version3` to configure in order to use it. The license of the Fraunhofer AAC library is incompatible with the GPL. Therefore, for GPL builds, you have to pass `--enable-nonfree` to configure in order to use it. To the best of our knowledge, it is compatible with the LGPL. #### 49.18.1 OpenCORE AMR FFmpeg can make use of the OpenCORE libraries for AMR-NB decoding/encoding and AMR-WB decoding. Go to http://sourceforge.net/projects/opencore-amr/ and follow the instructions for installing the libraries. Then pass `--enable-libopencore-amrnb` and/or `--enable-libopencore-amrwb` to configure to enable them. #### 49.18.2 VisualOn AMR-WB encoder library FFmpeg can make use of the VisualOn AMR-WBenc library for AMR-WB encoding. Go to http://sourceforge.net/projects/opencore-amr/ and follow the instructions for installing the library. Then pass `--enable-libvo-amrwbenc` to configure to enable it. #### 49.18.3 Fraunhofer AAC library FFmpeg can make use of the Fraunhofer AAC library for AAC decoding & encoding. Go to http://sourceforge.net/projects/opencore-amr/ and follow the instructions for installing the library. Then pass `--enable-libfdk-aac` to configure to enable it. #### 49.18.4 LC3 library FFmpeg can make use of the Google LC3 library for LC3 decoding & encoding. Go to https://github.com/google/liblc3/ and follow the instructions for installing the library. Then pass `--enable-liblc3` to configure to enable it. ### 49.19 OpenH264 FFmpeg can make use of the OpenH264 library for H.264 decoding and encoding. Go to http://www.openh264.org/ and follow the instructions for installing the library. Then pass `--enable-libopenh264` to configure to enable it. For decoding, this library is much more limited than the built-in decoder in libavcodec; currently, this library lacks support for decoding B-frames and some other main/high profile features. (It currently only supports constrained baseline profile and CABAC.) Using it is mostly useful for testing and for taking advantage of Cisco’s patent portfolio license (http://www.openh264.org/BINARY\_LICENSE.txt). ### 49.20 OpenJPEG FFmpeg can use the OpenJPEG libraries for decoding/encoding J2K videos. Go to http://www.openjpeg.org/ to get the libraries and follow the installation instructions. To enable using OpenJPEG in FFmpeg, pass `--enable-libopenjpeg` to ./configure. ### 49.21 rav1e FFmpeg can make use of rav1e (Rust AV1 Encoder) via its C bindings to encode videos. Go to https://github.com/xiph/rav1e/ and follow the instructions to build the C library. To enable using rav1e in FFmpeg, pass `--enable-librav1e` to ./configure. ### 49.22 SVT-AV1 FFmpeg can make use of the Scalable Video Technology for AV1 library for AV1 encoding. Go to https://gitlab.com/AOMediaCodec/SVT-AV1/ and follow the instructions for installing the library. Then pass `--enable-libsvtav1` to configure to enable it. ### 49.23 TwoLAME FFmpeg can make use of the TwoLAME library for MP2 encoding. Go to http://www.twolame.org/ and follow the instructions for installing the library. Then pass `--enable-libtwolame` to configure to enable it. ### 49.24 VapourSynth FFmpeg can read VapourSynth scripts as input. To enable support, pass `--enable-vapoursynth` to configure. Vapoursynth is detected via `pkg-config`. Versions 42 or greater supported. See http://www.vapoursynth.com/. Due to security concerns, Vapoursynth scripts will not be autodetected so the input format has to be forced. For ff\* CLI tools, add `-f vapoursynth` before the input `-i yourscript.vpy`. ### 49.25 x264 FFmpeg can make use of the x264 library for H.264 encoding. Go to http://www.videolan.org/developers/x264.html and follow the instructions for installing the library. Then pass `--enable-libx264` to configure to enable it. ### 49.26 x265 FFmpeg can make use of the x265 library for HEVC encoding. Go to http://x265.org/developers.html and follow the instructions for installing the library. Then pass `--enable-libx265` to configure to enable it. ### 49.27 xavs FFmpeg can make use of the xavs library for AVS encoding. Go to http://xavs.sf.net/ and follow the instructions for installing the library. Then pass `--enable-libxavs` to configure to enable it. ### 49.28 xavs2 FFmpeg can make use of the xavs2 library for AVS2-P2/IEEE1857.4 video encoding. Go to https://github.com/pkuvcl/xavs2 and follow the instructions for installing the library. Then pass `--enable-libxavs2` to configure to enable it. ### 49.29 eXtra-fast Essential Video Encoder (XEVE) FFmpeg can make use of the XEVE library for EVC video encoding. Go to https://github.com/mpeg5/xeve and follow the instructions for installing the XEVE library. Then pass `--enable-libxeve` to configure to enable it. ### 49.30 eXtra-fast Essential Video Decoder (XEVD) FFmpeg can make use of the XEVD library for EVC video decoding. Go to https://github.com/mpeg5/xevd and follow the instructions for installing the XEVD library. Then pass `--enable-libxevd` to configure to enable it. ### 49.31 ZVBI ZVBI is a VBI decoding library which can be used by FFmpeg to decode DVB teletext pages and DVB teletext subtitles. Go to http://sourceforge.net/projects/zapping/ and follow the instructions for installing the library. Then pass `--enable-libzvbi` to configure to enable it. ## 50 Supported File Formats, Codecs or Features You can use the `-formats` and `-codecs` options to have an exhaustive list. ### 50.1 File Formats FFmpeg supports the following file formats through the `libavformat` library: <table><tbody><tr><td>Name</td><td>Encoding</td><td>Decoding</td><td>Comments</td></tr><tr><td>3dostr</td><td></td><td>X</td></tr><tr><td>4xm</td><td></td><td>X</td><td>4X Technologies format, used in some games.</td></tr><tr><td>8088flex TMV</td><td></td><td>X</td></tr><tr><td>AAX</td><td></td><td>X</td><td>Audible Enhanced Audio format, used in audiobooks.</td></tr><tr><td>AA</td><td></td><td>X</td><td>Audible Format 2, 3, and 4, used in audiobooks.</td></tr><tr><td>ACT Voice</td><td></td><td>X</td><td>contains G.729 audio</td></tr><tr><td>Adobe Filmstrip</td><td>X</td><td>X</td></tr><tr><td>Audio IFF (AIFF)</td><td>X</td><td>X</td></tr><tr><td>American Laser Games MM</td><td></td><td>X</td><td>Multimedia format used in games like Mad Dog McCree.</td></tr><tr><td>3GPP AMR</td><td>X</td><td>X</td></tr><tr><td>Amazing Studio Packed Animation File</td><td></td><td>X</td><td>Multimedia format used in game Heart Of Darkness.</td></tr><tr><td>Apple HTTP Live Streaming</td><td></td><td>X</td></tr><tr><td>Artworx Data Format</td><td></td><td>X</td></tr><tr><td>Interplay ACM</td><td></td><td>X</td><td>Audio only format used in some Interplay games.</td></tr><tr><td>ADP</td><td></td><td>X</td><td>Audio format used on the Nintendo Gamecube.</td></tr><tr><td>AFC</td><td></td><td>X</td><td>Audio format used on the Nintendo Gamecube.</td></tr><tr><td>ADS/SS2</td><td></td><td>X</td><td>Audio format used on the PS2.</td></tr><tr><td>APNG</td><td>X</td><td>X</td></tr><tr><td>ASF</td><td>X</td><td>X</td><td>Advanced / Active Streaming Format.</td></tr><tr><td>AST</td><td>X</td><td>X</td><td>Audio format used on the Nintendo Wii.</td></tr><tr><td>AVI</td><td>X</td><td>X</td></tr><tr><td>AviSynth</td><td></td><td>X</td></tr><tr><td>AVR</td><td></td><td>X</td><td>Audio format used on Mac.</td></tr><tr><td>AVS</td><td></td><td>X</td><td>Multimedia format used by the Creature Shock game.</td></tr><tr><td>Beam Software SIFF</td><td></td><td>X</td><td>Audio and video format used in some games by Beam Software.</td></tr><tr><td>Bethesda Softworks VID</td><td></td><td>X</td><td>Used in some games from Bethesda Softworks.</td></tr><tr><td>Binary text</td><td></td><td>X</td></tr><tr><td>Bink</td><td></td><td>X</td><td>Multimedia format used by many games.</td></tr><tr><td>Bink Audio</td><td></td><td>X</td><td>Audio only multimedia format used by some games.</td></tr><tr><td>Bitmap Brothers JV</td><td></td><td>X</td><td>Used in Z and Z95 games.</td></tr><tr><td>BRP</td><td></td><td>X</td><td>Argonaut Games format.</td></tr><tr><td>Brute Force & Ignorance</td><td></td><td>X</td><td>Used in the game Flash Traffic: City of Angels.</td></tr><tr><td>BFSTM</td><td></td><td>X</td><td>Audio format used on the Nintendo WiiU (based on BRSTM).</td></tr><tr><td>BRSTM</td><td></td><td>X</td><td>Audio format used on the Nintendo Wii.</td></tr><tr><td>BW64</td><td></td><td>X</td><td>Broadcast Wave 64bit.</td></tr><tr><td>BWF</td><td>X</td><td>X</td></tr><tr><td>codec2 (raw)</td><td>X</td><td>X</td><td>Must be given -mode format option to decode correctly.</td></tr><tr><td>codec2 (.c2 files)</td><td>X</td><td>X</td><td>Contains header with version and mode info, simplifying playback.</td></tr><tr><td>CRI ADX</td><td>X</td><td>X</td><td>Audio-only format used in console video games.</td></tr><tr><td>CRI AIX</td><td></td><td>X</td></tr><tr><td>CRI HCA</td><td></td><td>X</td><td>Audio-only format used in console video games.</td></tr><tr><td>Discworld II BMV</td><td></td><td>X</td></tr><tr><td>Interplay C93</td><td></td><td>X</td><td>Used in the game Cyberia from Interplay.</td></tr><tr><td>Delphine Software International CIN</td><td></td><td>X</td><td>Multimedia format used by Delphine Software games.</td></tr><tr><td>Digital Speech Standard (DSS)</td><td></td><td>X</td></tr><tr><td>CD+G</td><td></td><td>X</td><td>Video format used by CD+G karaoke disks</td></tr><tr><td>Phantom Cine</td><td></td><td>X</td></tr><tr><td>Commodore CDXL</td><td></td><td>X</td><td>Amiga CD video format</td></tr><tr><td>Core Audio Format</td><td>X</td><td>X</td><td>Apple Core Audio Format</td></tr><tr><td>CRC testing format</td><td>X</td><td></td></tr><tr><td>Creative Voice</td><td>X</td><td>X</td><td>Created for the Sound Blaster Pro.</td></tr><tr><td>CRYO APC</td><td></td><td>X</td><td>Audio format used in some games by CRYO Interactive Entertainment.</td></tr><tr><td>D-Cinema audio</td><td>X</td><td>X</td></tr><tr><td>Deluxe Paint Animation</td><td></td><td>X</td></tr><tr><td>DCSTR</td><td></td><td>X</td></tr><tr><td>DFA</td><td></td><td>X</td><td>This format is used in Chronomaster game</td></tr><tr><td>DirectDraw Surface</td><td></td><td>X</td></tr><tr><td>DSD Stream File (DSF)</td><td></td><td>X</td></tr><tr><td>DV video</td><td>X</td><td>X</td></tr><tr><td>DXA</td><td></td><td>X</td><td>This format is used in the non-Windows version of the Feeble Files game and different game cutscenes repacked for use with ScummVM.</td></tr><tr><td>Electronic Arts cdata</td><td></td><td>X</td></tr><tr><td>Electronic Arts Multimedia</td><td></td><td>X</td><td>Used in various EA games; files have extensions like WVE and UV2.</td></tr><tr><td>Ensoniq Paris Audio File</td><td></td><td>X</td></tr><tr><td>FFM (FFserver live feed)</td><td>X</td><td>X</td></tr><tr><td>Flash (SWF)</td><td>X</td><td>X</td></tr><tr><td>Flash 9 (AVM2)</td><td>X</td><td>X</td><td>Only embedded audio is decoded.</td></tr><tr><td>FLI/FLC/FLX animation</td><td></td><td>X</td><td>.fli/.flc files</td></tr><tr><td>Flash Video (FLV)</td><td>X</td><td>X</td><td>Macromedia Flash video files</td></tr><tr><td>framecrc testing format</td><td>X</td><td></td></tr><tr><td>FunCom ISS</td><td></td><td>X</td><td>Audio format used in various games from FunCom like The Longest Journey.</td></tr><tr><td>G.723.1</td><td>X</td><td>X</td></tr><tr><td>G.726</td><td></td><td>X</td><td>Both left- and right-justified.</td></tr><tr><td>G.729 BIT</td><td>X</td><td>X</td></tr><tr><td>G.729 raw</td><td></td><td>X</td></tr><tr><td>GENH</td><td></td><td>X</td><td>Audio format for various games.</td></tr><tr><td>GIF Animation</td><td>X</td><td>X</td></tr><tr><td>GXF</td><td>X</td><td>X</td><td>General eXchange Format SMPTE 360M, used by Thomson Grass Valley playout servers.</td></tr><tr><td>HNM</td><td></td><td>X</td><td>Only version 4 supported, used in some games from Cryo Interactive</td></tr><tr><td>iCEDraw File</td><td></td><td>X</td></tr><tr><td>ICO</td><td>X</td><td>X</td><td>Microsoft Windows ICO</td></tr><tr><td>id Quake II CIN video</td><td></td><td>X</td></tr><tr><td>id RoQ</td><td>X</td><td>X</td><td>Used in Quake III, Jedi Knight 2 and other computer games.</td></tr><tr><td>IEC61937 encapsulation</td><td>X</td><td>X</td></tr><tr><td>IFF</td><td></td><td>X</td><td>Interchange File Format</td></tr><tr><td>IFV</td><td></td><td>X</td><td>A format used by some old CCTV DVRs.</td></tr><tr><td>iLBC</td><td>X</td><td>X</td></tr><tr><td>Interplay MVE</td><td></td><td>X</td><td>Format used in various Interplay computer games.</td></tr><tr><td>Iterated Systems ClearVideo</td><td></td><td>X</td><td>I-frames only</td></tr><tr><td>IV8</td><td></td><td>X</td><td>A format generated by IndigoVision 8000 video server.</td></tr><tr><td>IVF (On2)</td><td>X</td><td>X</td><td>A format used by libvpx</td></tr><tr><td>Internet Video Recording</td><td></td><td>X</td></tr><tr><td>IRCAM</td><td>X</td><td>X</td></tr><tr><td>LAF</td><td></td><td>X</td><td>Limitless Audio Format</td></tr><tr><td>LATM</td><td>X</td><td>X</td></tr><tr><td>LMLM4</td><td></td><td>X</td><td>Used by Linux Media Labs MPEG-4 PCI boards</td></tr><tr><td>LOAS</td><td></td><td>X</td><td>contains LATM multiplexed AAC audio</td></tr><tr><td>LRC</td><td>X</td><td>X</td></tr><tr><td>LVF</td><td></td><td>X</td></tr><tr><td>LXF</td><td></td><td>X</td><td>VR native stream format, used by Leitch/Harris’ video servers.</td></tr><tr><td>Magic Lantern Video (MLV)</td><td></td><td>X</td></tr><tr><td>Matroska</td><td>X</td><td>X</td></tr><tr><td>Matroska audio</td><td>X</td><td></td></tr><tr><td>FFmpeg metadata</td><td>X</td><td>X</td><td>Metadata in text format.</td></tr><tr><td>MAXIS XA</td><td></td><td>X</td><td>Used in Sim City 3000; file extension .xa.</td></tr><tr><td>MCA</td><td></td><td>X</td><td>Used in some games from Capcom; file extension .mca.</td></tr><tr><td>MD Studio</td><td></td><td>X</td></tr><tr><td>Metal Gear Solid: The Twin Snakes</td><td></td><td>X</td></tr><tr><td>Megalux Frame</td><td></td><td>X</td><td>Used by Megalux Ultimate Paint</td></tr><tr><td>MobiClip MODS</td><td></td><td>X</td></tr><tr><td>MobiClip MOFLEX</td><td></td><td>X</td></tr><tr><td>Mobotix .mxg</td><td></td><td>X</td></tr><tr><td>Monkey’s Audio</td><td></td><td>X</td></tr><tr><td>Motion Pixels MVI</td><td></td><td>X</td></tr><tr><td>MOV/QuickTime/MP4</td><td>X</td><td>X</td><td>3GP, 3GP2, PSP, iPod variants supported</td></tr><tr><td>MP2</td><td>X</td><td>X</td></tr><tr><td>MP3</td><td>X</td><td>X</td></tr><tr><td>MPEG-1 System</td><td>X</td><td>X</td><td>muxed audio and video, VCD format supported</td></tr><tr><td>MPEG-PS (program stream)</td><td>X</td><td>X</td><td>also known as <code>VOB</code> file, SVCD and DVD format supported</td></tr><tr><td>MPEG-TS (transport stream)</td><td>X</td><td>X</td><td>also known as DVB Transport Stream</td></tr><tr><td>MPEG-4</td><td>X</td><td>X</td><td>MPEG-4 is a variant of QuickTime.</td></tr><tr><td>MSF</td><td></td><td>X</td><td>Audio format used on the PS3.</td></tr><tr><td>Mirillis FIC video</td><td></td><td>X</td><td>No cursor rendering.</td></tr><tr><td>MIDI Sample Dump Standard</td><td></td><td>X</td></tr><tr><td>MIME multipart JPEG</td><td>X</td><td></td></tr><tr><td>MSN TCP webcam</td><td></td><td>X</td><td>Used by MSN Messenger webcam streams.</td></tr><tr><td>MTV</td><td></td><td>X</td></tr><tr><td>Musepack</td><td></td><td>X</td></tr><tr><td>Musepack SV8</td><td></td><td>X</td></tr><tr><td>Material eXchange Format (MXF)</td><td>X</td><td>X</td><td>SMPTE 377M, used by D-Cinema, broadcast industry.</td></tr><tr><td>Material eXchange Format (MXF), D-10 Mapping</td><td>X</td><td>X</td><td>SMPTE 386M, D-10/IMX Mapping.</td></tr><tr><td>NC camera feed</td><td></td><td>X</td><td>NC (AVIP NC4600) camera streams</td></tr><tr><td>NIST SPeech HEader REsources</td><td></td><td>X</td></tr><tr><td>Computerized Speech Lab NSP</td><td></td><td>X</td></tr><tr><td>NTT TwinVQ (VQF)</td><td></td><td>X</td><td>Nippon Telegraph and Telephone Corporation TwinVQ.</td></tr><tr><td>Nullsoft Streaming Video</td><td></td><td>X</td></tr><tr><td>NuppelVideo</td><td></td><td>X</td></tr><tr><td>NUT</td><td>X</td><td>X</td><td>NUT Open Container Format</td></tr><tr><td>Ogg</td><td>X</td><td>X</td></tr><tr><td>Playstation Portable PMP</td><td></td><td>X</td></tr><tr><td>Portable Voice Format</td><td></td><td>X</td></tr><tr><td>RK Audio (RKA)</td><td></td><td>X</td></tr><tr><td>TechnoTrend PVA</td><td></td><td>X</td><td>Used by TechnoTrend DVB PCI boards.</td></tr><tr><td>QCP</td><td></td><td>X</td></tr><tr><td>raw ADTS (AAC)</td><td>X</td><td>X</td></tr><tr><td>raw AC-3</td><td>X</td><td>X</td></tr><tr><td>raw AMR-NB</td><td></td><td>X</td></tr><tr><td>raw AMR-WB</td><td></td><td>X</td></tr><tr><td>raw APAC</td><td></td><td>X</td></tr><tr><td>raw aptX</td><td>X</td><td>X</td></tr><tr><td>raw aptX HD</td><td>X</td><td>X</td></tr><tr><td>raw Bonk</td><td></td><td>X</td></tr><tr><td>raw Chinese AVS video</td><td>X</td><td>X</td></tr><tr><td>raw DFPWM</td><td>X</td><td>X</td></tr><tr><td>raw Dirac</td><td>X</td><td>X</td></tr><tr><td>raw DNxHD</td><td>X</td><td>X</td></tr><tr><td>raw DTS</td><td>X</td><td>X</td></tr><tr><td>raw DTS-HD</td><td></td><td>X</td></tr><tr><td>raw E-AC-3</td><td>X</td><td>X</td></tr><tr><td>raw EVC</td><td>X</td><td>X</td></tr><tr><td>raw FLAC</td><td>X</td><td>X</td></tr><tr><td>raw GSM</td><td></td><td>X</td></tr><tr><td>raw H.261</td><td>X</td><td>X</td></tr><tr><td>raw H.263</td><td>X</td><td>X</td></tr><tr><td>raw H.264</td><td>X</td><td>X</td></tr><tr><td>raw HEVC</td><td>X</td><td>X</td></tr><tr><td>raw Ingenient MJPEG</td><td></td><td>X</td></tr><tr><td>raw MJPEG</td><td>X</td><td>X</td></tr><tr><td>raw MLP</td><td></td><td>X</td></tr><tr><td>raw MPEG</td><td></td><td>X</td></tr><tr><td>raw MPEG-1</td><td></td><td>X</td></tr><tr><td>raw MPEG-2</td><td></td><td>X</td></tr><tr><td>raw MPEG-4</td><td>X</td><td>X</td></tr><tr><td>raw NULL</td><td>X</td><td></td></tr><tr><td>raw video</td><td>X</td><td>X</td></tr><tr><td>raw id RoQ</td><td>X</td><td></td></tr><tr><td>raw OBU</td><td>X</td><td>X</td></tr><tr><td>raw OSQ</td><td></td><td>X</td></tr><tr><td>raw SBC</td><td>X</td><td>X</td></tr><tr><td>raw Shorten</td><td></td><td>X</td></tr><tr><td>raw TAK</td><td></td><td>X</td></tr><tr><td>raw TrueHD</td><td>X</td><td>X</td></tr><tr><td>raw VC-1</td><td>X</td><td>X</td></tr><tr><td>raw PCM A-law</td><td>X</td><td>X</td></tr><tr><td>raw PCM mu-law</td><td>X</td><td>X</td></tr><tr><td>raw PCM Archimedes VIDC</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 8 bit</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 16 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 16 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 24 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 24 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 32 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 32 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 64 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM signed 64 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 8 bit</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 16 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 16 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 24 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 24 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 32 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM unsigned 32 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM 16.8 floating point little-endian</td><td></td><td>X</td></tr><tr><td>raw PCM 24.0 floating point little-endian</td><td></td><td>X</td></tr><tr><td>raw PCM floating-point 32 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM floating-point 32 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM floating-point 64 bit big-endian</td><td>X</td><td>X</td></tr><tr><td>raw PCM floating-point 64 bit little-endian</td><td>X</td><td>X</td></tr><tr><td>RDT</td><td></td><td>X</td></tr><tr><td>REDCODE R3D</td><td></td><td>X</td><td>File format used by RED Digital cameras, contains JPEG 2000 frames and PCM audio.</td></tr><tr><td>RealMedia</td><td>X</td><td>X</td></tr><tr><td>Redirector</td><td></td><td>X</td></tr><tr><td>RedSpark</td><td></td><td>X</td></tr><tr><td>Renderware TeXture Dictionary</td><td></td><td>X</td></tr><tr><td>Resolume DXV</td><td>X</td><td>X</td><td>Encoding is only supported for the DXT1 (Normal Quality, No Alpha) texture format.</td></tr><tr><td>RF64</td><td></td><td>X</td></tr><tr><td>RL2</td><td></td><td>X</td><td>Audio and video format used in some games by Entertainment Software Partners.</td></tr><tr><td>RPL/ARMovie</td><td></td><td>X</td></tr><tr><td>Lego Mindstorms RSO</td><td>X</td><td>X</td></tr><tr><td>RSD</td><td></td><td>X</td></tr><tr><td>RTMP</td><td>X</td><td>X</td><td>Output is performed by publishing stream to RTMP server</td></tr><tr><td>RTP</td><td>X</td><td>X</td></tr><tr><td>RTSP</td><td>X</td><td>X</td></tr><tr><td>Sample Dump eXchange</td><td></td><td>X</td></tr><tr><td>SAP</td><td>X</td><td>X</td></tr><tr><td>SBG</td><td></td><td>X</td></tr><tr><td>SDNS</td><td></td><td>X</td></tr><tr><td>SDP</td><td></td><td>X</td></tr><tr><td>SER</td><td></td><td>X</td></tr><tr><td>Digital Pictures SGA</td><td></td><td>X</td></tr><tr><td>Sega FILM/CPK</td><td>X</td><td>X</td><td>Used in many Sega Saturn console games.</td></tr><tr><td>Silicon Graphics Movie</td><td></td><td>X</td></tr><tr><td>Sierra SOL</td><td></td><td>X</td><td>.sol files used in Sierra Online games.</td></tr><tr><td>Sierra VMD</td><td></td><td>X</td><td>Used in Sierra CD-ROM games.</td></tr><tr><td>Smacker</td><td></td><td>X</td><td>Multimedia format used by many games.</td></tr><tr><td>SMJPEG</td><td>X</td><td>X</td><td>Used in certain Loki game ports.</td></tr><tr><td>SMPTE 337M encapsulation</td><td></td><td>X</td></tr><tr><td>Smush</td><td></td><td>X</td><td>Multimedia format used in some LucasArts games.</td></tr><tr><td>Sony OpenMG (OMA)</td><td>X</td><td>X</td><td>Audio format used in Sony Sonic Stage and Sony Vegas.</td></tr><tr><td>Sony PlayStation STR</td><td></td><td>X</td></tr><tr><td>Sony Wave64 (W64)</td><td>X</td><td>X</td></tr><tr><td>SoX native format</td><td>X</td><td>X</td></tr><tr><td>SUN AU format</td><td>X</td><td>X</td></tr><tr><td>SUP raw PGS subtitles</td><td>X</td><td>X</td></tr><tr><td>SVAG</td><td></td><td>X</td><td>Audio format used in Konami PS2 games.</td></tr><tr><td>TDSC</td><td></td><td>X</td></tr><tr><td>Text files</td><td></td><td>X</td></tr><tr><td>THP</td><td></td><td>X</td><td>Used on the Nintendo GameCube.</td></tr><tr><td>Tiertex Limited SEQ</td><td></td><td>X</td><td>Tiertex .seq files used in the DOS CD-ROM version of the game Flashback.</td></tr><tr><td>True Audio</td><td>X</td><td>X</td></tr><tr><td>VAG</td><td></td><td>X</td><td>Audio format used in many Sony PS2 games.</td></tr><tr><td>VC-1 test bitstream</td><td>X</td><td>X</td></tr><tr><td>Vidvox Hap</td><td>X</td><td>X</td></tr><tr><td>Vivo</td><td></td><td>X</td></tr><tr><td>VPK</td><td></td><td>X</td><td>Audio format used in Sony PS games.</td></tr><tr><td>Marble WADY</td><td></td><td>X</td></tr><tr><td>WAV</td><td>X</td><td>X</td></tr><tr><td>Waveform Archiver</td><td></td><td>X</td></tr><tr><td>WavPack</td><td>X</td><td>X</td></tr><tr><td>WebM</td><td>X</td><td>X</td></tr><tr><td>Windows Televison (WTV)</td><td>X</td><td>X</td></tr><tr><td>Wing Commander III movie</td><td></td><td>X</td><td>Multimedia format used in Origin’s Wing Commander III computer game.</td></tr><tr><td>Westwood Studios audio</td><td>X</td><td>X</td><td>Multimedia format used in Westwood Studios games.</td></tr><tr><td>Westwood Studios VQA</td><td></td><td>X</td><td>Multimedia format used in Westwood Studios games.</td></tr><tr><td>Wideband Single-bit Data (WSD)</td><td></td><td>X</td></tr><tr><td>WVE</td><td></td><td>X</td></tr><tr><td>Konami XMD</td><td></td><td>X</td></tr><tr><td>XMV</td><td></td><td>X</td><td>Microsoft video container used in Xbox games.</td></tr><tr><td>XVAG</td><td></td><td>X</td><td>Audio format used on the PS3.</td></tr><tr><td>xWMA</td><td></td><td>X</td><td>Microsoft audio container used by XAudio 2.</td></tr><tr><td>eXtended BINary text (XBIN)</td><td></td><td>X</td></tr><tr><td>YUV4MPEG pipe</td><td>X</td><td>X</td></tr><tr><td>Psygnosis YOP</td><td></td><td>X</td></tr></tbody></table> `X` means that the feature in that column (encoding / decoding) is supported. ### 50.2 Image Formats FFmpeg can read and write images for each frame of a video sequence. The following image formats are supported: <table><tbody><tr><td>Name</td><td>Encoding</td><td>Decoding</td><td>Comments</td></tr><tr><td>.Y.U.V</td><td>X</td><td>X</td><td>one raw file per component</td></tr><tr><td>Alias PIX</td><td>X</td><td>X</td><td>Alias/Wavefront PIX image format</td></tr><tr><td>animated GIF</td><td>X</td><td>X</td></tr><tr><td>APNG</td><td>X</td><td>X</td><td>Animated Portable Network Graphics</td></tr><tr><td>BMP</td><td>X</td><td>X</td><td>Microsoft BMP image</td></tr><tr><td>BRender PIX</td><td></td><td>X</td><td>Argonaut BRender 3D engine image format.</td></tr><tr><td>CRI</td><td></td><td>X</td><td>Cintel RAW</td></tr><tr><td>DPX</td><td>X</td><td>X</td><td>Digital Picture Exchange</td></tr><tr><td>EXR</td><td></td><td>X</td><td>OpenEXR</td></tr><tr><td>FITS</td><td>X</td><td>X</td><td>Flexible Image Transport System</td></tr><tr><td>HDR</td><td>X</td><td>X</td><td>Radiance HDR RGBE Image format</td></tr><tr><td>IMG</td><td></td><td>X</td><td>GEM Raster image</td></tr><tr><td>JPEG</td><td>X</td><td>X</td><td>Progressive JPEG is not supported.</td></tr><tr><td>JPEG 2000</td><td>X</td><td>X</td></tr><tr><td>JPEG-LS</td><td>X</td><td>X</td></tr><tr><td>LJPEG</td><td>X</td><td></td><td>Lossless JPEG</td></tr><tr><td>Media 100</td><td></td><td>X</td></tr><tr><td>MSP</td><td></td><td>X</td><td>Microsoft Paint image</td></tr><tr><td>PAM</td><td>X</td><td>X</td><td>PAM is a PNM extension with alpha support.</td></tr><tr><td>PBM</td><td>X</td><td>X</td><td>Portable BitMap image</td></tr><tr><td>PCD</td><td></td><td>X</td><td>PhotoCD</td></tr><tr><td>PCX</td><td>X</td><td>X</td><td>PC Paintbrush</td></tr><tr><td>PFM</td><td>X</td><td>X</td><td>Portable FloatMap image</td></tr><tr><td>PGM</td><td>X</td><td>X</td><td>Portable GrayMap image</td></tr><tr><td>PGMYUV</td><td>X</td><td>X</td><td>PGM with U and V components in YUV 4:2:0</td></tr><tr><td>PGX</td><td></td><td>X</td><td>PGX file decoder</td></tr><tr><td>PHM</td><td>X</td><td>X</td><td>Portable HalfFloatMap image</td></tr><tr><td>PIC</td><td></td><td>X</td><td>Pictor/PC Paint</td></tr><tr><td>PNG</td><td>X</td><td>X</td><td>Portable Network Graphics image</td></tr><tr><td>PPM</td><td>X</td><td>X</td><td>Portable PixelMap image</td></tr><tr><td>PSD</td><td></td><td>X</td><td>Photoshop</td></tr><tr><td>PTX</td><td></td><td>X</td><td>V.Flash PTX format</td></tr><tr><td>QOI</td><td>X</td><td>X</td><td>Quite OK Image format</td></tr><tr><td>SGI</td><td>X</td><td>X</td><td>SGI RGB image format</td></tr><tr><td>Sun Rasterfile</td><td>X</td><td>X</td><td>Sun RAS image format</td></tr><tr><td>TIFF</td><td>X</td><td>X</td><td>YUV, JPEG and some extension is not supported yet.</td></tr><tr><td>Truevision Targa</td><td>X</td><td>X</td><td>Targa (.TGA) image format</td></tr><tr><td>VBN</td><td>X</td><td>X</td><td>Vizrt Binary Image format</td></tr><tr><td>WBMP</td><td>X</td><td>X</td><td>Wireless Application Protocol Bitmap image format</td></tr><tr><td>WebP</td><td>E</td><td>X</td><td>WebP image format, encoding supported through external library libwebp</td></tr><tr><td>XBM</td><td>X</td><td>X</td><td>X BitMap image format</td></tr><tr><td>XFace</td><td>X</td><td>X</td><td>X-Face image format</td></tr><tr><td>XPM</td><td></td><td>X</td><td>X PixMap image format</td></tr><tr><td>XWD</td><td>X</td><td>X</td><td>X Window Dump image format</td></tr></tbody></table> `X` means that the feature in that column (encoding / decoding) is supported. `E` means that support is provided through an external library. ### 50.3 Video Codecs <table><tbody><tr><td>Name</td><td>Encoding</td><td>Decoding</td><td>Comments</td></tr><tr><td>4X Movie</td><td></td><td>X</td><td>Used in certain computer games.</td></tr><tr><td>8088flex TMV</td><td></td><td>X</td></tr><tr><td>A64 multicolor</td><td>X</td><td></td><td>Creates video suitable to be played on a commodore 64 (multicolor mode).</td></tr><tr><td>Amazing Studio PAF Video</td><td></td><td>X</td></tr><tr><td>American Laser Games MM</td><td></td><td>X</td><td>Used in games like Mad Dog McCree.</td></tr><tr><td>Amuse Graphics Movie</td><td></td><td>X</td></tr><tr><td>AMV Video</td><td>X</td><td>X</td><td>Used in Chinese MP3 players.</td></tr><tr><td>ANSI/ASCII art</td><td></td><td>X</td></tr><tr><td>Apple Intermediate Codec</td><td></td><td>X</td></tr><tr><td>Apple MJPEG-B</td><td></td><td>X</td></tr><tr><td>Apple Pixlet</td><td></td><td>X</td></tr><tr><td>Apple ProRes</td><td>X</td><td>X</td><td>fourcc: apch,apcn,apcs,apco,ap4h,ap4x</td></tr><tr><td>Apple QuickDraw</td><td></td><td>X</td><td>fourcc: qdrw</td></tr><tr><td>Argonaut Video</td><td></td><td>X</td><td>Used in some Argonaut games.</td></tr><tr><td>Asus v1</td><td>X</td><td>X</td><td>fourcc: ASV1</td></tr><tr><td>Asus v2</td><td>X</td><td>X</td><td>fourcc: ASV2</td></tr><tr><td>ATI VCR1</td><td></td><td>X</td><td>fourcc: VCR1</td></tr><tr><td>ATI VCR2</td><td></td><td>X</td><td>fourcc: VCR2</td></tr><tr><td>Auravision Aura</td><td></td><td>X</td></tr><tr><td>Auravision Aura 2</td><td></td><td>X</td></tr><tr><td>Autodesk Animator Flic video</td><td></td><td>X</td></tr><tr><td>Autodesk RLE</td><td></td><td>X</td><td>fourcc: AASC</td></tr><tr><td>AV1</td><td>E</td><td>E</td><td>Supported through external libraries libaom, libdav1d, librav1e and libsvtav1</td></tr><tr><td>Avid 1:1 10-bit RGB Packer</td><td>X</td><td>X</td><td>fourcc: AVrp</td></tr><tr><td>AVS (Audio Video Standard) video</td><td></td><td>X</td><td>Video encoding used by the Creature Shock game.</td></tr><tr><td>AVS2-P2/IEEE1857.4</td><td>E</td><td>E</td><td>Supported through external libraries libxavs2 and libdavs2</td></tr><tr><td>AVS3-P2/IEEE1857.10</td><td></td><td>E</td><td>Supported through external library libuavs3d</td></tr><tr><td>AYUV</td><td>X</td><td>X</td><td>Microsoft uncompressed packed 4:4:4:4</td></tr><tr><td>Beam Software VB</td><td></td><td>X</td></tr><tr><td>Bethesda VID video</td><td></td><td>X</td><td>Used in some games from Bethesda Softworks.</td></tr><tr><td>Bink Video</td><td></td><td>X</td></tr><tr><td>BitJazz SheerVideo</td><td></td><td>X</td></tr><tr><td>Bitmap Brothers JV video</td><td></td><td>X</td></tr><tr><td>y41p Brooktree uncompressed 4:1:1 12-bit</td><td>X</td><td>X</td></tr><tr><td>Brooktree ProSumer Video</td><td></td><td>X</td><td>fourcc: BT20</td></tr><tr><td>Brute Force & Ignorance</td><td></td><td>X</td><td>Used in the game Flash Traffic: City of Angels.</td></tr><tr><td>C93 video</td><td></td><td>X</td><td>Codec used in Cyberia game.</td></tr><tr><td>CamStudio</td><td></td><td>X</td><td>fourcc: CSCD</td></tr><tr><td>CD+G</td><td></td><td>X</td><td>Video codec for CD+G karaoke disks</td></tr><tr><td>CDXL</td><td></td><td>X</td><td>Amiga CD video codec</td></tr><tr><td>Chinese AVS video</td><td>E</td><td>X</td><td>AVS1-P2, JiZhun profile, encoding through external library libxavs</td></tr><tr><td>Delphine Software International CIN video</td><td></td><td>X</td><td>Codec used in Delphine Software International games.</td></tr><tr><td>Discworld II BMV Video</td><td></td><td>X</td></tr><tr><td>CineForm HD</td><td>X</td><td>X</td></tr><tr><td>Canopus HQ</td><td></td><td>X</td></tr><tr><td>Canopus HQA</td><td></td><td>X</td></tr><tr><td>Canopus HQX</td><td></td><td>X</td></tr><tr><td>Canopus Lossless Codec</td><td></td><td>X</td></tr><tr><td>CDToons</td><td></td><td>X</td><td>Codec used in various Broderbund games.</td></tr><tr><td>Cinepak</td><td></td><td>X</td></tr><tr><td>Cirrus Logic AccuPak</td><td>X</td><td>X</td><td>fourcc: CLJR</td></tr><tr><td>CPiA Video Format</td><td></td><td>X</td></tr><tr><td>Creative YUV (CYUV)</td><td></td><td>X</td></tr><tr><td>DFA</td><td></td><td>X</td><td>Codec used in Chronomaster game.</td></tr><tr><td>Dirac</td><td>E</td><td>X</td><td>supported though the native vc2 (Dirac Pro) encoder</td></tr><tr><td>Deluxe Paint Animation</td><td></td><td>X</td></tr><tr><td>DNxHD</td><td>X</td><td>X</td><td>aka SMPTE VC3</td></tr><tr><td>Duck TrueMotion 1.0</td><td></td><td>X</td><td>fourcc: DUCK</td></tr><tr><td>Duck TrueMotion 2.0</td><td></td><td>X</td><td>fourcc: TM20</td></tr><tr><td>Duck TrueMotion 2.0 RT</td><td></td><td>X</td><td>fourcc: TR20</td></tr><tr><td>DV (Digital Video)</td><td>X</td><td>X</td></tr><tr><td>Dxtory capture format</td><td></td><td>X</td></tr><tr><td>Feeble Files/ScummVM DXA</td><td></td><td>X</td><td>Codec originally used in Feeble Files game.</td></tr><tr><td>Electronic Arts CMV video</td><td></td><td>X</td><td>Used in NHL 95 game.</td></tr><tr><td>Electronic Arts Madcow video</td><td></td><td>X</td></tr><tr><td>Electronic Arts TGV video</td><td></td><td>X</td></tr><tr><td>Electronic Arts TGQ video</td><td></td><td>X</td></tr><tr><td>Electronic Arts TQI video</td><td></td><td>X</td></tr><tr><td>Escape 124</td><td></td><td>X</td></tr><tr><td>Escape 130</td><td></td><td>X</td></tr><tr><td>EVC / MPEG-5 Part 1</td><td>E</td><td>E</td><td>encoding and decoding supported through external libraries libxeve and libxevd</td></tr><tr><td>FFmpeg video codec #1</td><td>X</td><td>X</td><td>lossless codec (fourcc: FFV1)</td></tr><tr><td>Flash Screen Video v1</td><td>X</td><td>X</td><td>fourcc: FSV1</td></tr><tr><td>Flash Screen Video v2</td><td>X</td><td>X</td></tr><tr><td>Flash Video (FLV)</td><td>X</td><td>X</td><td>Sorenson H.263 used in Flash</td></tr><tr><td>FM Screen Capture Codec</td><td></td><td>X</td></tr><tr><td>Forward Uncompressed</td><td></td><td>X</td></tr><tr><td>Fraps</td><td></td><td>X</td></tr><tr><td>Go2Meeting</td><td></td><td>X</td><td>fourcc: G2M2, G2M3</td></tr><tr><td>Go2Webinar</td><td></td><td>X</td><td>fourcc: G2M4</td></tr><tr><td>Gremlin Digital Video</td><td></td><td>X</td></tr><tr><td>H.261</td><td>X</td><td>X</td></tr><tr><td>H.263 / H.263-1996</td><td>X</td><td>X</td></tr><tr><td>H.263+ / H.263-1998 / H.263 version 2</td><td>X</td><td>X</td></tr><tr><td>H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10</td><td>E</td><td>X</td><td>encoding supported through external library libx264 and OpenH264</td></tr><tr><td>HEVC</td><td>X</td><td>X</td><td>encoding supported through external library libx265 and libkvazaar</td></tr><tr><td>HNM version 4</td><td></td><td>X</td></tr><tr><td>HuffYUV</td><td>X</td><td>X</td></tr><tr><td>HuffYUV FFmpeg variant</td><td>X</td><td>X</td></tr><tr><td>IBM Ultimotion</td><td></td><td>X</td><td>fourcc: ULTI</td></tr><tr><td>id Cinematic video</td><td></td><td>X</td><td>Used in Quake II.</td></tr><tr><td>id RoQ video</td><td>X</td><td>X</td><td>Used in Quake III, Jedi Knight 2, other computer games.</td></tr><tr><td>IFF ILBM</td><td></td><td>X</td><td>IFF interleaved bitmap</td></tr><tr><td>IFF ByteRun1</td><td></td><td>X</td><td>IFF run length encoded bitmap</td></tr><tr><td>Infinity IMM4</td><td></td><td>X</td></tr><tr><td>Intel H.263</td><td></td><td>X</td></tr><tr><td>Intel Indeo 2</td><td></td><td>X</td></tr><tr><td>Intel Indeo 3</td><td></td><td>X</td></tr><tr><td>Intel Indeo 4</td><td></td><td>X</td></tr><tr><td>Intel Indeo 5</td><td></td><td>X</td></tr><tr><td>Interplay C93</td><td></td><td>X</td><td>Used in the game Cyberia from Interplay.</td></tr><tr><td>Interplay MVE video</td><td></td><td>X</td><td>Used in Interplay .MVE files.</td></tr><tr><td>J2K</td><td>X</td><td>X</td></tr><tr><td>Karl Morton’s video codec</td><td></td><td>X</td><td>Codec used in Worms games.</td></tr><tr><td>Kega Game Video (KGV1)</td><td></td><td>X</td><td>Kega emulator screen capture codec.</td></tr><tr><td>Lagarith</td><td></td><td>X</td></tr><tr><td>LCEVC / MPEG-5 LCEVC / MPEG-5 Part 2</td><td></td><td>E</td><td>decoding supported through external library liblcevc-dec</td></tr><tr><td>LCL (LossLess Codec Library) MSZH</td><td></td><td>X</td></tr><tr><td>LCL (LossLess Codec Library) ZLIB</td><td>E</td><td>E</td></tr><tr><td>LEAD MCMP</td><td></td><td>X</td></tr><tr><td>LOCO</td><td></td><td>X</td></tr><tr><td>LucasArts SANM/Smush</td><td></td><td>X</td><td>Used in LucasArts games / SMUSH animations.</td></tr><tr><td>lossless MJPEG</td><td>X</td><td>X</td></tr><tr><td>MagicYUV Video</td><td>X</td><td>X</td></tr><tr><td>Mandsoft Screen Capture Codec</td><td></td><td>X</td></tr><tr><td>Microsoft ATC Screen</td><td></td><td>X</td><td>Also known as Microsoft Screen 3.</td></tr><tr><td>Microsoft Expression Encoder Screen</td><td></td><td>X</td><td>Also known as Microsoft Titanium Screen 2.</td></tr><tr><td>Microsoft RLE</td><td>X</td><td>X</td></tr><tr><td>Microsoft Screen 1</td><td></td><td>X</td><td>Also known as Windows Media Video V7 Screen.</td></tr><tr><td>Microsoft Screen 2</td><td></td><td>X</td><td>Also known as Windows Media Video V9 Screen.</td></tr><tr><td>Microsoft Video 1</td><td></td><td>X</td></tr><tr><td>Mimic</td><td></td><td>X</td><td>Used in MSN Messenger Webcam streams.</td></tr><tr><td>Miro VideoXL</td><td></td><td>X</td><td>fourcc: VIXL</td></tr><tr><td>MJPEG (Motion JPEG)</td><td>X</td><td>X</td></tr><tr><td>Mobotix MxPEG video</td><td></td><td>X</td></tr><tr><td>Motion Pixels video</td><td></td><td>X</td></tr><tr><td>MPEG-1 video</td><td>X</td><td>X</td></tr><tr><td>MPEG-2 video</td><td>X</td><td>X</td></tr><tr><td>MPEG-4 part 2</td><td>X</td><td>X</td><td>libxvidcore can be used alternatively for encoding.</td></tr><tr><td>MPEG-4 part 2 Microsoft variant version 1</td><td></td><td>X</td></tr><tr><td>MPEG-4 part 2 Microsoft variant version 2</td><td>X</td><td>X</td></tr><tr><td>MPEG-4 part 2 Microsoft variant version 3</td><td>X</td><td>X</td></tr><tr><td>Newtek SpeedHQ</td><td>X</td><td>X</td></tr><tr><td>Nintendo Gamecube THP video</td><td></td><td>X</td></tr><tr><td>NotchLC</td><td></td><td>X</td></tr><tr><td>NuppelVideo/RTjpeg</td><td></td><td>X</td><td>Video encoding used in NuppelVideo files.</td></tr><tr><td>On2 VP3</td><td></td><td>X</td><td>still experimental</td></tr><tr><td>On2 VP4</td><td></td><td>X</td><td>fourcc: VP40</td></tr><tr><td>On2 VP5</td><td></td><td>X</td><td>fourcc: VP50</td></tr><tr><td>On2 VP6</td><td></td><td>X</td><td>fourcc: VP60,VP61,VP62</td></tr><tr><td>On2 VP7</td><td></td><td>X</td><td>fourcc: VP70,VP71</td></tr><tr><td>VP8</td><td>E</td><td>X</td><td>fourcc: VP80, encoding supported through external library libvpx</td></tr><tr><td>VP9</td><td>E</td><td>X</td><td>encoding supported through external library libvpx</td></tr><tr><td>Pinnacle TARGA CineWave YUV16</td><td></td><td>X</td><td>fourcc: Y216</td></tr><tr><td>Q-team QPEG</td><td></td><td>X</td><td>fourccs: QPEG, Q1.0, Q1.1</td></tr><tr><td>QuickTime 8BPS video</td><td></td><td>X</td></tr><tr><td>QuickTime Animation (RLE) video</td><td>X</td><td>X</td><td>fourcc: ’rle ’</td></tr><tr><td>QuickTime Graphics (SMC)</td><td>X</td><td>X</td><td>fourcc: ’smc ’</td></tr><tr><td>QuickTime video (RPZA)</td><td>X</td><td>X</td><td>fourcc: rpza</td></tr><tr><td>R10K AJA Kona 10-bit RGB Codec</td><td>X</td><td>X</td></tr><tr><td>R210 Quicktime Uncompressed RGB 10-bit</td><td>X</td><td>X</td></tr><tr><td>Raw Video</td><td>X</td><td>X</td></tr><tr><td>RealVideo 1.0</td><td>X</td><td>X</td></tr><tr><td>RealVideo 2.0</td><td>X</td><td>X</td></tr><tr><td>RealVideo 3.0</td><td></td><td>X</td><td>still far from ideal</td></tr><tr><td>RealVideo 4.0</td><td></td><td>X</td></tr><tr><td>RealVideo 6.0</td><td></td><td>X</td></tr><tr><td>Renderware TXD (TeXture Dictionary)</td><td></td><td>X</td><td>Texture dictionaries used by the Renderware Engine.</td></tr><tr><td>RivaTuner Video</td><td></td><td>X</td><td>fourcc: ’RTV1’</td></tr><tr><td>RL2 video</td><td></td><td>X</td><td>used in some games by Entertainment Software Partners</td></tr><tr><td>ScreenPressor</td><td></td><td>X</td></tr><tr><td>Screenpresso</td><td></td><td>X</td></tr><tr><td>Screen Recorder Gold Codec</td><td></td><td>X</td></tr><tr><td>Sierra VMD video</td><td></td><td>X</td><td>Used in Sierra VMD files.</td></tr><tr><td>Silicon Graphics Motion Video Compressor 1 (MVC1)</td><td></td><td>X</td></tr><tr><td>Silicon Graphics Motion Video Compressor 2 (MVC2)</td><td></td><td>X</td></tr><tr><td>Silicon Graphics RLE 8-bit video</td><td></td><td>X</td></tr><tr><td>Smacker video</td><td></td><td>X</td><td>Video encoding used in Smacker.</td></tr><tr><td>SMPTE VC-1</td><td></td><td>X</td></tr><tr><td>Snow</td><td>X</td><td>X</td><td>experimental wavelet codec (fourcc: SNOW)</td></tr><tr><td>Sony PlayStation MDEC (Motion DECoder)</td><td></td><td>X</td></tr><tr><td>Sorenson Vector Quantizer 1</td><td>X</td><td>X</td><td>fourcc: SVQ1</td></tr><tr><td>Sorenson Vector Quantizer 3</td><td></td><td>X</td><td>fourcc: SVQ3</td></tr><tr><td>Sunplus JPEG (SP5X)</td><td></td><td>X</td><td>fourcc: SP5X</td></tr><tr><td>TechSmith Screen Capture Codec</td><td></td><td>X</td><td>fourcc: TSCC</td></tr><tr><td>TechSmith Screen Capture Codec 2</td><td></td><td>X</td><td>fourcc: TSC2</td></tr><tr><td>Theora</td><td>E</td><td>X</td><td>encoding supported through external library libtheora</td></tr><tr><td>Tiertex Limited SEQ video</td><td></td><td>X</td><td>Codec used in DOS CD-ROM FlashBack game.</td></tr><tr><td>Ut Video</td><td>X</td><td>X</td></tr><tr><td>v210 QuickTime uncompressed 4:2:2 10-bit</td><td>X</td><td>X</td></tr><tr><td>v308 QuickTime uncompressed 4:4:4</td><td>X</td><td>X</td></tr><tr><td>v408 QuickTime uncompressed 4:4:4:4</td><td>X</td><td>X</td></tr><tr><td>v410 QuickTime uncompressed 4:4:4 10-bit</td><td>X</td><td>X</td></tr><tr><td>VBLE Lossless Codec</td><td></td><td>X</td></tr><tr><td>vMix Video</td><td></td><td>X</td><td>fourcc: ’VMX1’</td></tr><tr><td>VMware Screen Codec / VMware Video</td><td></td><td>X</td><td>Codec used in videos captured by VMware.</td></tr><tr><td>Westwood Studios VQA (Vector Quantized Animation) video</td><td></td><td>X</td></tr><tr><td>Windows Media Image</td><td></td><td>X</td></tr><tr><td>Windows Media Video 7</td><td>X</td><td>X</td></tr><tr><td>Windows Media Video 8</td><td>X</td><td>X</td></tr><tr><td>Windows Media Video 9</td><td></td><td>X</td><td>not completely working</td></tr><tr><td>Wing Commander III / Xan</td><td></td><td>X</td><td>Used in Wing Commander III .MVE files.</td></tr><tr><td>Wing Commander IV / Xan</td><td></td><td>X</td><td>Used in Wing Commander IV.</td></tr><tr><td>Winnov WNV1</td><td></td><td>X</td></tr><tr><td>WMV7</td><td>X</td><td>X</td></tr><tr><td>YAMAHA SMAF</td><td>X</td><td>X</td></tr><tr><td>Psygnosis YOP Video</td><td></td><td>X</td></tr><tr><td>yuv4</td><td>X</td><td>X</td><td>libquicktime uncompressed packed 4:2:0</td></tr><tr><td>ZeroCodec Lossless Video</td><td></td><td>X</td></tr><tr><td>ZLIB</td><td>X</td><td>X</td><td>part of LCL, encoder experimental</td></tr><tr><td>Zip Motion Blocks Video</td><td>X</td><td>X</td><td>Encoder works only in PAL8.</td></tr></tbody></table> `X` means that the feature in that column (encoding / decoding) is supported. `E` means that support is provided through an external library. ### 50.4 Audio Codecs <table><tbody><tr><td>Name</td><td>Encoding</td><td>Decoding</td><td>Comments</td></tr><tr><td>8SVX exponential</td><td></td><td>X</td></tr><tr><td>8SVX fibonacci</td><td></td><td>X</td></tr><tr><td>AAC</td><td>EX</td><td>X</td><td>encoding supported through internal encoder and external library libfdk-aac</td></tr><tr><td>AAC+</td><td>E</td><td>IX</td><td>encoding supported through external library libfdk-aac</td></tr><tr><td>AC-3</td><td>IX</td><td>IX</td></tr><tr><td>ACELP.KELVIN</td><td></td><td>X</td></tr><tr><td>ADPCM 4X Movie</td><td></td><td>X</td></tr><tr><td>ADPCM Yamaha AICA</td><td></td><td>X</td></tr><tr><td>ADPCM AmuseGraphics Movie</td><td></td><td>X</td></tr><tr><td>ADPCM Argonaut Games</td><td>X</td><td>X</td></tr><tr><td>ADPCM CDROM XA</td><td></td><td>X</td></tr><tr><td>ADPCM Creative Technology</td><td></td><td>X</td><td>16 -> 4, 8 -> 4, 8 -> 3, 8 -> 2</td></tr><tr><td>ADPCM Electronic Arts</td><td></td><td>X</td><td>Used in various EA titles.</td></tr><tr><td>ADPCM Electronic Arts Maxis CDROM XS</td><td></td><td>X</td><td>Used in Sim City 3000.</td></tr><tr><td>ADPCM Electronic Arts R1</td><td></td><td>X</td></tr><tr><td>ADPCM Electronic Arts R2</td><td></td><td>X</td></tr><tr><td>ADPCM Electronic Arts R3</td><td></td><td>X</td></tr><tr><td>ADPCM Electronic Arts XAS</td><td></td><td>X</td></tr><tr><td>ADPCM G.722</td><td>X</td><td>X</td></tr><tr><td>ADPCM G.726</td><td>X</td><td>X</td></tr><tr><td>ADPCM IMA Acorn Replay</td><td></td><td>X</td></tr><tr><td>ADPCM IMA AMV</td><td>X</td><td>X</td><td>Used in AMV files</td></tr><tr><td>ADPCM IMA Cunning Developments</td><td></td><td>X</td></tr><tr><td>ADPCM IMA Electronic Arts EACS</td><td></td><td>X</td></tr><tr><td>ADPCM IMA Electronic Arts SEAD</td><td></td><td>X</td></tr><tr><td>ADPCM IMA Funcom</td><td></td><td>X</td></tr><tr><td>ADPCM IMA High Voltage Software ALP</td><td>X</td><td>X</td></tr><tr><td>ADPCM IMA Mobiclip MOFLEX</td><td></td><td>X</td></tr><tr><td>ADPCM IMA QuickTime</td><td>X</td><td>X</td></tr><tr><td>ADPCM IMA Simon & Schuster Interactive</td><td>X</td><td>X</td></tr><tr><td>ADPCM IMA Ubisoft APM</td><td>X</td><td>X</td></tr><tr><td>ADPCM IMA Loki SDL MJPEG</td><td></td><td>X</td></tr><tr><td>ADPCM IMA WAV</td><td>X</td><td>X</td></tr><tr><td>ADPCM IMA Westwood</td><td></td><td>X</td></tr><tr><td>ADPCM ISS IMA</td><td></td><td>X</td><td>Used in FunCom games.</td></tr><tr><td>ADPCM IMA Dialogic</td><td></td><td>X</td></tr><tr><td>ADPCM IMA Duck DK3</td><td></td><td>X</td><td>Used in some Sega Saturn console games.</td></tr><tr><td>ADPCM IMA Duck DK4</td><td></td><td>X</td><td>Used in some Sega Saturn console games.</td></tr><tr><td>ADPCM IMA Radical</td><td></td><td>X</td></tr><tr><td>ADPCM IMA Xbox</td><td></td><td>X</td></tr><tr><td>ADPCM Microsoft</td><td>X</td><td>X</td></tr><tr><td>ADPCM MS IMA</td><td>X</td><td>X</td></tr><tr><td>ADPCM Nintendo Gamecube AFC</td><td></td><td>X</td></tr><tr><td>ADPCM Nintendo Gamecube DTK</td><td></td><td>X</td></tr><tr><td>ADPCM Nintendo THP</td><td></td><td>X</td></tr><tr><td>ADPCM Playstation</td><td></td><td>X</td></tr><tr><td>ADPCM QT IMA</td><td>X</td><td>X</td></tr><tr><td>ADPCM SEGA CRI ADX</td><td>X</td><td>X</td><td>Used in Sega Dreamcast games.</td></tr><tr><td>ADPCM Shockwave Flash</td><td>X</td><td>X</td></tr><tr><td>ADPCM Sound Blaster Pro 2-bit</td><td></td><td>X</td></tr><tr><td>ADPCM Sound Blaster Pro 2.6-bit</td><td></td><td>X</td></tr><tr><td>ADPCM Sound Blaster Pro 4-bit</td><td></td><td>X</td></tr><tr><td>ADPCM VIMA</td><td></td><td>X</td><td>Used in LucasArts SMUSH animations.</td></tr><tr><td>ADPCM Konami XMD</td><td></td><td>X</td></tr><tr><td>ADPCM Westwood Studios IMA</td><td>X</td><td>X</td><td>Used in Westwood Studios games like Command and Conquer.</td></tr><tr><td>ADPCM Yamaha</td><td>X</td><td>X</td></tr><tr><td>ADPCM Zork</td><td></td><td>X</td></tr><tr><td>AMR-NB</td><td>E</td><td>X</td><td>encoding supported through external library libopencore-amrnb</td></tr><tr><td>AMR-WB</td><td>E</td><td>X</td><td>encoding supported through external library libvo-amrwbenc</td></tr><tr><td>Amazing Studio PAF Audio</td><td></td><td>X</td></tr><tr><td>Apple lossless audio</td><td>X</td><td>X</td><td>QuickTime fourcc ’alac’</td></tr><tr><td>aptX</td><td>X</td><td>X</td><td>Used in Bluetooth A2DP</td></tr><tr><td>aptX HD</td><td>X</td><td>X</td><td>Used in Bluetooth A2DP</td></tr><tr><td>ATRAC1</td><td></td><td>X</td></tr><tr><td>ATRAC3</td><td></td><td>X</td></tr><tr><td>ATRAC3+</td><td></td><td>X</td></tr><tr><td>ATRAC9</td><td></td><td>X</td></tr><tr><td>Bink Audio</td><td></td><td>X</td><td>Used in Bink and Smacker files in many games.</td></tr><tr><td>Bonk audio</td><td></td><td>X</td></tr><tr><td>CELT</td><td></td><td>E</td><td>decoding supported through external library libcelt</td></tr><tr><td>codec2</td><td>E</td><td>E</td><td>en/decoding supported through external library libcodec2</td></tr><tr><td>CRI HCA</td><td></td><td>X</td></tr><tr><td>Delphine Software International CIN audio</td><td></td><td>X</td><td>Codec used in Delphine Software International games.</td></tr><tr><td>DFPWM</td><td>X</td><td>X</td></tr><tr><td>Digital Speech Standard - Standard Play mode (DSS SP)</td><td></td><td>X</td></tr><tr><td>Discworld II BMV Audio</td><td></td><td>X</td></tr><tr><td>COOK</td><td></td><td>X</td><td>All versions except 5.1 are supported.</td></tr><tr><td>DCA (DTS Coherent Acoustics)</td><td>X</td><td>X</td><td>supported extensions: XCh, XXCH, X96, XBR, XLL, LBR (partially)</td></tr><tr><td>Dolby E</td><td></td><td>X</td></tr><tr><td>DPCM Cuberoot-Delta-Exact</td><td></td><td>X</td><td>Used in few games.</td></tr><tr><td>DPCM Gremlin</td><td></td><td>X</td></tr><tr><td>DPCM id RoQ</td><td>X</td><td>X</td><td>Used in Quake III, Jedi Knight 2 and other computer games.</td></tr><tr><td>DPCM Marble WADY</td><td></td><td>X</td></tr><tr><td>DPCM Interplay</td><td></td><td>X</td><td>Used in various Interplay computer games.</td></tr><tr><td>DPCM Squareroot-Delta-Exact</td><td></td><td>X</td><td>Used in various games.</td></tr><tr><td>DPCM Sierra Online</td><td></td><td>X</td><td>Used in Sierra Online game audio files.</td></tr><tr><td>DPCM Sol</td><td></td><td>X</td></tr><tr><td>DPCM Xan</td><td></td><td>X</td><td>Used in Origin’s Wing Commander IV AVI files.</td></tr><tr><td>DPCM Xilam DERF</td><td></td><td>X</td></tr><tr><td>DSD (Direct Stream Digital), least significant bit first</td><td></td><td>X</td></tr><tr><td>DSD (Direct Stream Digital), most significant bit first</td><td></td><td>X</td></tr><tr><td>DSD (Direct Stream Digital), least significant bit first, planar</td><td></td><td>X</td></tr><tr><td>DSD (Direct Stream Digital), most significant bit first, planar</td><td></td><td>X</td></tr><tr><td>DSP Group TrueSpeech</td><td></td><td>X</td></tr><tr><td>DST (Direct Stream Transfer)</td><td></td><td>X</td></tr><tr><td>DV audio</td><td></td><td>X</td></tr><tr><td>Enhanced AC-3</td><td>X</td><td>X</td></tr><tr><td>EVRC (Enhanced Variable Rate Codec)</td><td></td><td>X</td></tr><tr><td>FLAC (Free Lossless Audio Codec)</td><td>X</td><td>IX</td></tr><tr><td>FTR Voice</td><td></td><td>X</td></tr><tr><td>G.723.1</td><td>X</td><td>X</td></tr><tr><td>G.729</td><td></td><td>X</td></tr><tr><td>GSM</td><td>E</td><td>X</td><td>encoding supported through external library libgsm</td></tr><tr><td>GSM Microsoft variant</td><td>E</td><td>X</td><td>encoding supported through external library libgsm</td></tr><tr><td>IAC (Indeo Audio Coder)</td><td></td><td>X</td></tr><tr><td>iLBC (Internet Low Bitrate Codec)</td><td>E</td><td>EX</td><td>encoding and decoding supported through external library libilbc</td></tr><tr><td>IMC (Intel Music Coder)</td><td></td><td>X</td></tr><tr><td>Interplay ACM</td><td></td><td>X</td></tr><tr><td>LC3</td><td>E</td><td>E</td><td>supported through external library liblc3</td></tr><tr><td>MACE (Macintosh Audio Compression/Expansion) 6:1</td><td></td><td>X</td></tr><tr><td>Marian’s A-pac audio</td><td></td><td>X</td></tr><tr><td>MI-SC4 (Micronas SC-4 Audio)</td><td></td><td>X</td></tr><tr><td>MLP (Meridian Lossless Packing)</td><td>X</td><td>X</td><td>Used in DVD-Audio discs.</td></tr><tr><td>Monkey’s Audio</td><td></td><td>X</td></tr><tr><td>MP1 (MPEG audio layer 1)</td><td></td><td>IX</td></tr><tr><td>MP2 (MPEG audio layer 2)</td><td>IX</td><td>IX</td><td>encoding supported also through external library TwoLAME</td></tr><tr><td>MP3 (MPEG audio layer 3)</td><td>E</td><td>IX</td><td>encoding supported through external library LAME, ADU MP3 and MP3onMP4 also supported</td></tr><tr><td>MPEG-4 Audio Lossless Coding (ALS)</td><td></td><td>X</td></tr><tr><td>MobiClip FastAudio</td><td></td><td>X</td></tr><tr><td>Musepack SV7</td><td></td><td>X</td></tr><tr><td>Musepack SV8</td><td></td><td>X</td></tr><tr><td>Nellymoser Asao</td><td>X</td><td>X</td></tr><tr><td>On2 AVC (Audio for Video Codec)</td><td></td><td>X</td></tr><tr><td>Opus</td><td>E</td><td>X</td><td>encoding supported through external library libopus</td></tr><tr><td>OSQ (Original Sound Quality)</td><td></td><td>X</td></tr><tr><td>PCM A-law</td><td>X</td><td>X</td></tr><tr><td>PCM mu-law</td><td>X</td><td>X</td></tr><tr><td>PCM Archimedes VIDC</td><td>X</td><td>X</td></tr><tr><td>PCM signed 8-bit planar</td><td>X</td><td>X</td></tr><tr><td>PCM signed 16-bit big-endian planar</td><td>X</td><td>X</td></tr><tr><td>PCM signed 16-bit little-endian planar</td><td>X</td><td>X</td></tr><tr><td>PCM signed 24-bit little-endian planar</td><td>X</td><td>X</td></tr><tr><td>PCM signed 32-bit little-endian planar</td><td>X</td><td>X</td></tr><tr><td>PCM 32-bit floating point big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM 32-bit floating point little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM 64-bit floating point big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM 64-bit floating point little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM D-Cinema audio signed 24-bit</td><td>X</td><td>X</td></tr><tr><td>PCM signed 8-bit</td><td>X</td><td>X</td></tr><tr><td>PCM signed 16-bit big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM signed 16-bit little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM signed 24-bit big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM signed 24-bit little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM signed 32-bit big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM signed 32-bit little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM signed 16/20/24-bit big-endian in MPEG-TS</td><td></td><td>X</td></tr><tr><td>PCM unsigned 8-bit</td><td>X</td><td>X</td></tr><tr><td>PCM unsigned 16-bit big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM unsigned 16-bit little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM unsigned 24-bit big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM unsigned 24-bit little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM unsigned 32-bit big-endian</td><td>X</td><td>X</td></tr><tr><td>PCM unsigned 32-bit little-endian</td><td>X</td><td>X</td></tr><tr><td>PCM SGA</td><td></td><td>X</td></tr><tr><td>QCELP / PureVoice</td><td></td><td>X</td></tr><tr><td>QDesign Music Codec 1</td><td></td><td>X</td></tr><tr><td>QDesign Music Codec 2</td><td></td><td>X</td><td>There are still some distortions.</td></tr><tr><td>RealAudio 1.0 (14.4K)</td><td>X</td><td>X</td><td>Real 14400 bit/s codec</td></tr><tr><td>RealAudio 2.0 (28.8K)</td><td></td><td>X</td><td>Real 28800 bit/s codec</td></tr><tr><td>RealAudio 3.0 (dnet)</td><td>IX</td><td>X</td><td>Real low bitrate AC-3 codec</td></tr><tr><td>RealAudio Lossless</td><td></td><td>X</td></tr><tr><td>RealAudio SIPR / ACELP.NET</td><td></td><td>X</td></tr><tr><td>RK Audio (RKA)</td><td></td><td>X</td></tr><tr><td>SBC (low-complexity subband codec)</td><td>X</td><td>X</td><td>Used in Bluetooth A2DP</td></tr><tr><td>Shorten</td><td></td><td>X</td></tr><tr><td>Sierra VMD audio</td><td></td><td>X</td><td>Used in Sierra VMD files.</td></tr><tr><td>Smacker audio</td><td></td><td>X</td></tr><tr><td>SMPTE 302M AES3 audio</td><td>X</td><td>X</td></tr><tr><td>Sonic</td><td>X</td><td>X</td><td>experimental codec</td></tr><tr><td>Sonic lossless</td><td>X</td><td>X</td><td>experimental codec</td></tr><tr><td>Speex</td><td>E</td><td>EX</td><td>supported through external library libspeex</td></tr><tr><td>TAK (Tom’s lossless Audio Kompressor)</td><td></td><td>X</td></tr><tr><td>True Audio (TTA)</td><td>X</td><td>X</td></tr><tr><td>TrueHD</td><td>X</td><td>X</td><td>Used in HD-DVD and Blu-Ray discs.</td></tr><tr><td>TwinVQ (VQF flavor)</td><td></td><td>X</td></tr><tr><td>VIMA</td><td></td><td>X</td><td>Used in LucasArts SMUSH animations.</td></tr><tr><td>ViewQuest VQC</td><td></td><td>X</td></tr><tr><td>Vorbis</td><td>E</td><td>X</td><td>A native but very primitive encoder exists.</td></tr><tr><td>Voxware MetaSound</td><td></td><td>X</td></tr><tr><td>Waveform Archiver</td><td></td><td>X</td></tr><tr><td>WavPack</td><td>X</td><td>X</td></tr><tr><td>Westwood Audio (SND1)</td><td></td><td>X</td></tr><tr><td>Windows Media Audio 1</td><td>X</td><td>X</td></tr><tr><td>Windows Media Audio 2</td><td>X</td><td>X</td></tr><tr><td>Windows Media Audio Lossless</td><td></td><td>X</td></tr><tr><td>Windows Media Audio Pro</td><td></td><td>X</td></tr><tr><td>Windows Media Audio Voice</td><td></td><td>X</td></tr><tr><td>Xbox Media Audio 1</td><td></td><td>X</td></tr><tr><td>Xbox Media Audio 2</td><td></td><td>X</td></tr></tbody></table> `X` means that the feature in that column (encoding / decoding) is supported. `E` means that support is provided through an external library. `I` means that an integer-only version is available, too (ensures high performance on systems without hardware floating point support). ### 50.5 Subtitle Formats <table><tbody><tr><td>Name</td><td>Muxing</td><td>Demuxing</td><td>Encoding</td><td>Decoding</td></tr><tr><td>3GPP Timed Text</td><td></td><td></td><td>X</td><td>X</td></tr><tr><td>AQTitle</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>DVB</td><td>X</td><td>X</td><td>X</td><td>X</td></tr><tr><td>DVB teletext</td><td></td><td>X</td><td></td><td>E</td></tr><tr><td>DVD</td><td>X</td><td>X</td><td>X</td><td>X</td></tr><tr><td>JACOsub</td><td>X</td><td>X</td><td></td><td>X</td></tr><tr><td>MicroDVD</td><td>X</td><td>X</td><td></td><td>X</td></tr><tr><td>MPL2</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>MPsub (MPlayer)</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>PGS</td><td></td><td></td><td></td><td>X</td></tr><tr><td>PJS (Phoenix)</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>RealText</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>SAMI</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>Spruce format (STL)</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>SSA/ASS</td><td>X</td><td>X</td><td>X</td><td>X</td></tr><tr><td>SubRip (SRT)</td><td>X</td><td>X</td><td>X</td><td>X</td></tr><tr><td>SubViewer v1</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>SubViewer</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>TED Talks captions</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>TTML</td><td>X</td><td></td><td>X</td><td></td></tr><tr><td>VobSub (IDX+SUB)</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>VPlayer</td><td></td><td>X</td><td></td><td>X</td></tr><tr><td>WebVTT</td><td>X</td><td>X</td><td>X</td><td>X</td></tr><tr><td>XSUB</td><td></td><td></td><td>X</td><td>X</td></tr></tbody></table> `X` means that the feature is supported. `E` means that support is provided through an external library. ### 50.6 Network Protocols <table><tbody><tr><td>Name</td><td>Support</td></tr><tr><td>AMQP</td><td>E</td></tr><tr><td>file</td><td>X</td></tr><tr><td>FTP</td><td>X</td></tr><tr><td>Gopher</td><td>X</td></tr><tr><td>Gophers</td><td>X</td></tr><tr><td>HLS</td><td>X</td></tr><tr><td>HTTP</td><td>X</td></tr><tr><td>HTTPS</td><td>X</td></tr><tr><td>Icecast</td><td>X</td></tr><tr><td>MMSH</td><td>X</td></tr><tr><td>MMST</td><td>X</td></tr><tr><td>pipe</td><td>X</td></tr><tr><td>Pro-MPEG FEC</td><td>X</td></tr><tr><td>RTMP</td><td>X</td></tr><tr><td>RTMPE</td><td>X</td></tr><tr><td>RTMPS</td><td>X</td></tr><tr><td>RTMPT</td><td>X</td></tr><tr><td>RTMPTE</td><td>X</td></tr><tr><td>RTMPTS</td><td>X</td></tr><tr><td>RTP</td><td>X</td></tr><tr><td>SAMBA</td><td>E</td></tr><tr><td>SCTP</td><td>X</td></tr><tr><td>SFTP</td><td>E</td></tr><tr><td>TCP</td><td>X</td></tr><tr><td>TLS</td><td>X</td></tr><tr><td>UDP</td><td>X</td></tr><tr><td>ZMQ</td><td>E</td></tr></tbody></table> `X` means that the protocol is supported. `E` means that support is provided through an external library. ### 50.7 Input/Output Devices <table><tbody><tr><td>Name</td><td>Input</td><td>Output</td></tr><tr><td>ALSA</td><td>X</td><td>X</td></tr><tr><td>BKTR</td><td>X</td><td></td></tr><tr><td>caca</td><td></td><td>X</td></tr><tr><td>DV1394</td><td>X</td><td></td></tr><tr><td>Lavfi virtual device</td><td>X</td><td></td></tr><tr><td>Linux framebuffer</td><td>X</td><td>X</td></tr><tr><td>JACK</td><td>X</td><td></td></tr><tr><td>LIBCDIO</td><td>X</td></tr><tr><td>LIBDC1394</td><td>X</td><td></td></tr><tr><td>OpenAL</td><td>X</td></tr><tr><td>OpenGL</td><td></td><td>X</td></tr><tr><td>OSS</td><td>X</td><td>X</td></tr><tr><td>PulseAudio</td><td>X</td><td>X</td></tr><tr><td>SDL</td><td></td><td>X</td></tr><tr><td>Video4Linux2</td><td>X</td><td>X</td></tr><tr><td>VfW capture</td><td>X</td><td></td></tr><tr><td>X11 grabbing</td><td>X</td><td></td></tr><tr><td>Win32 grabbing</td><td>X</td><td></td></tr></tbody></table> `X` means that input/output is supported. ### 50.8 Timecode <table><tbody><tr><td>Codec/format</td><td>Read</td><td>Write</td></tr><tr><td>AVI</td><td>X</td><td>X</td></tr><tr><td>DV</td><td>X</td><td>X</td></tr><tr><td>GXF</td><td>X</td><td>X</td></tr><tr><td>MOV</td><td>X</td><td>X</td></tr><tr><td>MPEG1/2</td><td>X</td><td>X</td></tr><tr><td>MXF</td><td>X</td><td>X</td></tr></tbody></table> ## 51 See Also ffmpeg ffplay, ffprobe, ffmpeg-utils, ffmpeg-scaler, ffmpeg-resampler, ffmpeg-codecs, ffmpeg-bitstream-filters, ffmpeg-formats, ffmpeg-devices, ffmpeg-protocols, ffmpeg-filters ## 52 Authors The FFmpeg developers. For details about the authorship, see the Git history of the project (https://git.ffmpeg.org/ffmpeg), e.g. by typing the command `git log` in the FFmpeg source directory, or browsing the online repository at https://git.ffmpeg.org/ffmpeg. Maintainers for the specific components are listed in the file MAINTAINERS in the source code tree. This document was generated on _April 7, 2025_ using _makeinfo_. Hosting provided by telepoint.bg