W↓
All docs
🔑
Sign Up/Sign In
ffmpeg.org/ffmpeg.html
Public Link
Apr 8, 2025, 1:02:01 PM - complete - 142.1 kB
Created by:
****ad@vlad.studio
Starting URLs:
https://ffmpeg.org/ffmpeg.html
Max Pages:
1
## Page: https://ffmpeg.org/ffmpeg.html ## Table of Contents * 1 Synopsis * 2 Description * 3 Detailed description * 3.1 Streamcopy * 3.2 Trancoding * 3.3 Filtering * 3.3.1 Simple filtergraphs * 3.3.2 Complex filtergraphs * 3.4 Loopback decoders * 4 Stream selection * 4.1 Description * 4.1.1 Automatic stream selection * 4.1.2 Manual stream selection * 4.1.3 Complex filtergraphs * 4.1.4 Stream handling * 4.2 Examples * 5 Options * 5.1 Stream specifiers * 5.2 Generic options * 5.3 AVOptions * 5.4 Main options * 5.5 Video Options * 5.6 Advanced Video options * 5.7 Audio Options * 5.8 Advanced Audio options * 5.9 Subtitle options * 5.10 Advanced Subtitle options * 5.11 Advanced options * 5.12 Preset files * 5.12.1 ffpreset files * 5.12.2 avpreset files * 5.13 vstats file format * 6 Examples * 6.1 Video and Audio grabbing * 6.2 X11 grabbing * 6.3 Video and Audio file format conversion * 7 See Also ## 1 Synopsis ffmpeg \[global\_options\] {\[input\_file\_options\] -i input\_url} ... {\[output\_file\_options\] output\_url} ... ## 2 Description `ffmpeg` is a universal media converter. It can read a wide variety of inputs - including live grabbing/recording devices - filter, and transcode them into a plethora of output formats. `ffmpeg` reads from an arbitrary number of inputs (which can be regular files, pipes, network streams, grabbing devices, etc.), specified by the `-i` option, and writes to an arbitrary number of outputs, which are specified by a plain output url. Anything found on the command line which cannot be interpreted as an option is considered to be an output url. Each input or output can, in principle, contain any number of elementary streams of different types (video/audio/subtitle/attachment/data), though the allowed stream counts and/or types may be limited by the container format. Selecting which streams from which inputs will go into which output is either done automatically or with the `-map` option (see the Stream selection chapter). To refer to inputs/outputs in options, you must use their indices (0-based). E.g. the first input is `0`, the second is `1`, etc. Similarly, streams within an input/output are referred to by their indices. E.g. `2:3` refers to the fourth stream in the third input or output. Also see the Stream specifiers chapter. As a general rule, options are applied to the next specified file. Therefore, order is important, and you can have the same option on the command line multiple times. Each occurrence is then applied to the next input or output file. Exceptions from this rule are the global options (e.g. verbosity level), which should be specified first. Do not mix input and output files – first specify all input files, then all output files. Also do not mix options which belong to different files. All options apply ONLY to the next input or output file and are reset between files. Some simple examples follow. * Convert an input media file to a different format, by re-encoding media streams: ffmpeg -i input.avi output.mp4 * Set the video bitrate of the output file to 64 kbit/s: ffmpeg -i input.avi -b:v 64k -bufsize 64k output.mp4 * Force the frame rate of the output file to 24 fps: ffmpeg -i input.avi -r 24 output.mp4 * Force the frame rate of the input file (valid for raw formats only) to 1 fps and the frame rate of the output file to 24 fps: ffmpeg -r 1 -i input.m2v -r 24 output.mp4 The format option may be needed for raw input files. ## 3 Detailed description `ffmpeg` builds a transcoding pipeline out of the components listed below. The program’s operation then consists of input data chunks flowing from the sources down the pipes towards the sinks, while being transformed by the components they encounter along the way. The following kinds of components are available: * _Demuxers_ (short for "demultiplexers") read an input source in order to extract * global properties such as metadata or chapters; * list of input elementary streams and their properties One demuxer instance is created for each \-i option, and sends encoded _packets_ to _decoders_ or _muxers_. In other literature, demuxers are sometimes called _splitters_, because their main function is splitting a file into elementary streams (though some files only contain one elementary stream). A schematic representation of a demuxer looks like this: ┌──────────┬───────────────────────┐ │ demuxer │ │ packets for stream 0 ╞══════════╡ elementary stream 0 ├──────────────────────► │ │ │ │ global ├───────────────────────┤ │properties│ │ packets for stream 1 │ and │ elementary stream 1 ├──────────────────────► │ metadata │ │ │ ├───────────────────────┤ │ │ │ │ │ ........... │ │ │ │ │ ├───────────────────────┤ │ │ │ packets for stream N │ │ elementary stream N ├──────────────────────► │ │ │ └──────────┴───────────────────────┘ ▲ │ │ read from file, network stream, │ grabbing device, etc. │ * _Decoders_ receive encoded (compressed) _packets_ for an audio, video, or subtitle elementary stream, and decode them into raw _frames_ (arrays of pixels for video, PCM for audio). A decoder is typically associated with (and receives its input from) an elementary stream in a _demuxer_, but sometimes may also exist on its own (see Loopback decoders). A schematic representation of a decoder looks like this: ┌─────────┐ packets │ │ raw frames ─────────►│ decoder ├────────────► │ │ └─────────┘ * _Filtergraphs_ process and transform raw audio or video _frames_. A filtergraph consists of one or more individual _filters_ linked into a graph. Filtergraphs come in two flavors - _simple_ and _complex_, configured with the \-filter and \-filter\_complex options, respectively. A simple filtergraph is associated with an _output elementary stream_; it receives the input to be filtered from a _decoder_ and sends filtered output to that output stream’s _encoder_. A simple video filtergraph that performs deinterlacing (using the `yadif` deinterlacer) followed by resizing (using the `scale` filter) can look like this: ┌────────────────────────┐ │ simple filtergraph │ frames from ╞════════════════════════╡ frames for a decoder │ ┌───────┐ ┌───────┐ │ an encoder ────────────►├─►│ yadif ├─►│ scale ├─►│────────────► │ └───────┘ └───────┘ │ └────────────────────────┘ A complex filtergraph is standalone and not associated with any specific stream. It may have multiple (or zero) inputs, potentially of different types (audio or video), each of which receiving data either from a decoder or another complex filtergraph’s output. It also has one or more outputs that feed either an encoder or another complex filtergraph’s input. The following example diagram represents a complex filtergraph with 3 inputs and 2 outputs (all video): ┌─────────────────────────────────────────────────┐ │ complex filtergraph │ ╞═════════════════════════════════════════════════╡ frames ├───────┐ ┌─────────┐ ┌─────────┐ ┌────────┤ frames ─────────►│input 0├─►│ overlay ├─────►│ overlay ├─►│output 0├────────► ├───────┘ │ │ │ │ └────────┤ frames ├───────┐╭►│ │ ╭►│ │ │ ─────────►│input 1├╯ └─────────┘ │ └─────────┘ │ ├───────┘ │ │ frames ├───────┐ ┌─────┐ ┌─────┬─╯ ┌────────┤ frames ─────────►│input 2├►│scale├►│split├───────────────►│output 1├────────► ├───────┘ └─────┘ └─────┘ └────────┤ └─────────────────────────────────────────────────┘ Frames from second input are overlaid over those from the first. Frames from the third input are rescaled, then the duplicated into two identical streams. One of them is overlaid over the combined first two inputs, with the result exposed as the filtergraph’s first output. The other duplicate ends up being the filtergraph’s second output. * _Encoders_ receive raw audio, video, or subtitle _frames_ and encode them into encoded _packets_. The encoding (compression) process is typically _lossy_ - it degrades stream quality to make the output smaller; some encoders are _lossless_, but at the cost of much higher output size. A video or audio encoder receives its input from some filtergraph’s output, subtitle encoders receive input from a decoder (since subtitle filtering is not supported yet). Every encoder is associated with some muxer’s _output elementary stream_ and sends its output to that muxer. A schematic representation of an encoder looks like this: ┌─────────┐ raw frames │ │ packets ────────────►│ encoder ├─────────► │ │ └─────────┘ * _Muxers_ (short for "multiplexers") receive encoded _packets_ for their elementary streams from encoders (the _transcoding_ path) or directly from demuxers (the _streamcopy_ path), interleave them (when there is more than one elementary stream), and write the resulting bytes into the output file (or pipe, network stream, etc.). A schematic representation of a muxer looks like this: ┌──────────────────────┬───────────┐ packets for stream 0 │ │ muxer │ ──────────────────────►│ elementary stream 0 ╞═══════════╡ │ │ │ ├──────────────────────┤ global │ packets for stream 1 │ │properties │ ──────────────────────►│ elementary stream 1 │ and │ │ │ metadata │ ├──────────────────────┤ │ │ │ │ │ ........... │ │ │ │ │ ├──────────────────────┤ │ packets for stream N │ │ │ ──────────────────────►│ elementary stream N │ │ │ │ │ └──────────────────────┴─────┬─────┘ │ write to file, network stream, │ grabbing device, etc. │ │ ▼ ### 3.1 Streamcopy The simplest pipeline in `ffmpeg` is single-stream _streamcopy_, that is copying one _input elementary stream_’s packets without decoding, filtering, or encoding them. As an example, consider an input file called INPUT.mkv with 3 elementary streams, from which we take the second and write it to file OUTPUT.mp4. A schematic representation of such a pipeline looks like this: ┌──────────┬─────────────────────┐ │ demuxer │ │ unused ╞══════════╡ elementary stream 0 ├────────╳ │ │ │ │INPUT.mkv ├─────────────────────┤ ┌──────────────────────┬───────────┐ │ │ │ packets │ │ muxer │ │ │ elementary stream 1 ├─────────►│ elementary stream 0 ╞═══════════╡ │ │ │ │ │OUTPUT.mp4 │ │ ├─────────────────────┤ └──────────────────────┴───────────┘ │ │ │ unused │ │ elementary stream 2 ├────────╳ │ │ │ └──────────┴─────────────────────┘ The above pipeline can be constructed with the following commandline: ffmpeg -i INPUT.mkv -map 0:1 -c copy OUTPUT.mp4 In this commandline * there is a single input INPUT.mkv; * there are no input options for this input; * there is a single output OUTPUT.mp4; * there are two output options for this output: * `-map 0:1` selects the input stream to be used - from input with index 0 (i.e. the first one) the stream with index 1 (i.e. the second one); * `-c copy` selects the `copy` encoder, i.e. streamcopy with no decoding or encoding. Streamcopy is useful for changing the elementary stream count, container format, or modifying container-level metadata. Since there is no decoding or encoding, it is very fast and there is no quality loss. However, it might not work in some cases because of a variety of factors (e.g. certain information required by the target container is not available in the source). Applying filters is obviously also impossible, since filters work on decoded frames. More complex streamcopy scenarios can be constructed - e.g. combining streams from two input files into a single output: ┌──────────┬────────────────────┐ ┌────────────────────┬───────────┐ │ demuxer 0│ │ packets │ │ muxer │ ╞══════════╡elementary stream 0 ├────────►│elementary stream 0 ╞═══════════╡ │INPUT0.mkv│ │ │ │OUTPUT.mp4 │ └──────────┴────────────────────┘ ├────────────────────┤ │ ┌──────────┬────────────────────┐ │ │ │ │ demuxer 1│ │ packets │elementary stream 1 │ │ ╞══════════╡elementary stream 0 ├────────►│ │ │ │INPUT1.aac│ │ └────────────────────┴───────────┘ └──────────┴────────────────────┘ that can be built by the commandline ffmpeg -i INPUT0.mkv -i INPUT1.aac -map 0:0 -map 1:0 -c copy OUTPUT.mp4 The output \-map option is used twice here, creating two streams in the output file - one fed by the first input and one by the second. The single instance of the \-c option selects streamcopy for both of those streams. You could also use multiple instances of this option together with Stream specifiers to apply different values to each stream, as will be demonstrated in following sections. A converse scenario is splitting multiple streams from a single input into multiple outputs: ┌──────────┬─────────────────────┐ ┌───────────────────┬───────────┐ │ demuxer │ │ packets │ │ muxer 0 │ ╞══════════╡ elementary stream 0 ├─────────►│elementary stream 0╞═══════════╡ │ │ │ │ │OUTPUT0.mp4│ │INPUT.mkv ├─────────────────────┤ └───────────────────┴───────────┘ │ │ │ packets ┌───────────────────┬───────────┐ │ │ elementary stream 1 ├─────────►│ │ muxer 1 │ │ │ │ │elementary stream 0╞═══════════╡ └──────────┴─────────────────────┘ │ │OUTPUT1.mp4│ └───────────────────┴───────────┘ built with ffmpeg -i INPUT.mkv -map 0:0 -c copy OUTPUT0.mp4 -map 0:1 -c copy OUTPUT1.mp4 Note how a separate instance of the \-c option is needed for every output file even though their values are the same. This is because non-global options (which is most of them) only apply in the context of the file before which they are placed. These examples can of course be further generalized into arbitrary remappings of any number of inputs into any number of outputs. ### 3.2 Trancoding _Transcoding_ is the process of decoding a stream and then encoding it again. Since encoding tends to be computationally expensive and in most cases degrades the stream quality (i.e. it is _lossy_), you should only transcode when you need to and perform streamcopy otherwise. Typical reasons to transcode are: * applying filters - e.g. resizing, deinterlacing, or overlaying video; resampling or mixing audio; * you want to feed the stream to something that cannot decode the original codec. Note that `ffmpeg` will transcode all audio, video, and subtitle streams unless you specify \-c copy for them. Consider an example pipeline that reads an input file with one audio and one video stream, transcodes the video and copies the audio into a single output file. This can be schematically represented as follows ┌──────────┬─────────────────────┐ │ demuxer │ │ audio packets ╞══════════╡ stream 0 (audio) ├─────────────────────────────────────╮ │ │ │ │ │INPUT.mkv ├─────────────────────┤ video ┌─────────┐ raw │ │ │ │ packets │ video │ video frames │ │ │ stream 1 (video) ├─────────►│ decoder ├──────────────╮ │ │ │ │ │ │ │ │ └──────────┴─────────────────────┘ └─────────┘ │ │ ▼ ▼ │ │ ┌──────────┬─────────────────────┐ video ┌─────────┐ │ │ │ muxer │ │ packets │ video │ │ │ ╞══════════╡ stream 0 (video) │◄─────────┤ encoder ├──────────────╯ │ │ │ │ │(libx264)│ │ │OUTPUT.mp4├─────────────────────┤ └─────────┘ │ │ │ │ │ │ │ stream 1 (audio) │◄────────────────────────────────────╯ │ │ │ └──────────┴─────────────────────┘ and implemented with the following commandline: ffmpeg -i INPUT.mkv -map 0:v -map 0:a -c:v libx264 -c:a copy OUTPUT.mp4 Note how it uses stream specifiers `:v` and `:a` to select input streams and apply different values of the \-c option to them; see the Stream specifiers section for more details. ### 3.3 Filtering When transcoding, audio and video streams can be filtered before encoding, with either a _simple_ or _complex_ filtergraph. #### 3.3.1 Simple filtergraphs Simple filtergraphs are those that have exactly one input and output, both of the same type (audio or video). They are configured with the per-stream \-filter option (with \-vf and \-af aliases for \-filter:v (video) and \-filter:a (audio) respectively). Note that simple filtergraphs are tied to their output stream, so e.g. if you have multiple audio streams, \-af will create a separate filtergraph for each one. Taking the trancoding example from above, adding filtering (and omitting audio, for clarity) makes it look like this: ┌──────────┬───────────────┐ │ demuxer │ │ ┌─────────┐ ╞══════════╡ video stream │ packets │ video │ frames │INPUT.mkv │ ├─────────►│ decoder ├─────►───╮ │ │ │ └─────────┘ │ └──────────┴───────────────┘ │ ╭───────────◄───────────╯ │ ┌────────────────────────┐ │ │ simple filtergraph │ │ ╞════════════════════════╡ │ │ ┌───────┐ ┌───────┐ │ ╰──►├─►│ yadif ├─►│ scale ├─►├╮ │ └───────┘ └───────┘ ││ └────────────────────────┘│ │ │ ┌──────────┬───────────────┐ video ┌─────────┐ │ │ muxer │ │ packets │ video │ │ ╞══════════╡ video stream │◄─────────┤ encoder ├───────◄───────╯ │OUTPUT.mp4│ │ │ │ │ │ │ └─────────┘ └──────────┴───────────────┘ #### 3.3.2 Complex filtergraphs Complex filtergraphs are those which cannot be described as simply a linear processing chain applied to one stream. This is the case, for example, when the graph has more than one input and/or output, or when output stream type is different from input. Complex filtergraphs are configured with the \-filter\_complex option. Note that this option is global, since a complex filtergraph, by its nature, cannot be unambiguously associated with a single stream or file. Each instance of \-filter\_complex creates a new complex filtergraph, and there can be any number of them. A trivial example of a complex filtergraph is the `overlay` filter, which has two video inputs and one video output, containing one video overlaid on top of the other. Its audio counterpart is the `amix` filter. ### 3.4 Loopback decoders While decoders are normally associated with demuxer streams, it is also possible to create "loopback" decoders that decode the output from some encoder and allow it to be fed back to complex filtergraphs. This is done with the `-dec` directive, which takes as a parameter the index of the output stream that should be decoded. Every such directive creates a new loopback decoder, indexed with successive integers starting at zero. These indices should then be used to refer to loopback decoders in complex filtergraph link labels, as described in the documentation for \-filter\_complex. Decoding AVOptions can be passed to loopback decoders by placing them before `-dec`, analogously to input/output options. E.g. the following example: ffmpeg -i INPUT \\ -map 0:v:0 -c:v libx264 -crf 45 -f null - \\ -threads 3 -dec 0:0 \\ -filter\_complex '\[0:v\]\[dec:0\]hstack\[stack\]' \\ -map '\[stack\]' -c:v ffv1 OUTPUT reads an input video and * (line 2) encodes it with `libx264` at low quality; * (line 3) decodes this encoded stream using 3 threads; * (line 4) places decoded video side by side with the original input video; * (line 5) combined video is then losslessly encoded and written into OUTPUT. Such a transcoding pipeline can be represented with the following diagram: ┌──────────┬───────────────┐ │ demuxer │ │ ┌─────────┐ ┌─────────┐ ┌────────────────────┐ ╞══════════╡ video stream │ │ video │ │ video │ │ null muxer │ │ INPUT │ ├──►│ decoder ├──┬────────►│ encoder ├─┬─►│(discards its input)│ │ │ │ └─────────┘ │ │(libx264)│ │ └────────────────────┘ └──────────┴───────────────┘ │ └─────────┘ │ ╭───────◄──╯ ┌─────────┐ │ │ │loopback │ │ │ ╭─────◄──────┤ decoder ├────◄──╯ │ │ └─────────┘ │ │ │ │ │ │ ┌───────────────────┐ │ │ │complex filtergraph│ │ │ ╞═══════════════════╡ │ │ │ ┌─────────────┐ │ ╰─╫─►├─►│ hstack ├─►├╮ ╰─►├─►│ │ ││ │ └─────────────┘ ││ └───────────────────┘│ │ ┌──────────┬───────────────┐ ┌─────────┐ │ │ muxer │ │ │ video │ │ ╞══════════╡ video stream │◄─┤ encoder ├───────◄──────────╯ │ OUTPUT │ │ │ (ffv1) │ │ │ │ └─────────┘ └──────────┴───────────────┘ ## 4 Stream selection `ffmpeg` provides the `-map` option for manual control of stream selection in each output file. Users can skip `-map` and let ffmpeg perform automatic stream selection as described below. The `-vn / -an / -sn / -dn` options can be used to skip inclusion of video, audio, subtitle and data streams respectively, whether manually mapped or automatically selected, except for those streams which are outputs of complex filtergraphs. ### 4.1 Description The sub-sections that follow describe the various rules that are involved in stream selection. The examples that follow next show how these rules are applied in practice. While every effort is made to accurately reflect the behavior of the program, FFmpeg is under continuous development and the code may have changed since the time of this writing. #### 4.1.1 Automatic stream selection In the absence of any map options for a particular output file, ffmpeg inspects the output format to check which type of streams can be included in it, viz. video, audio and/or subtitles. For each acceptable stream type, ffmpeg will pick one stream, when available, from among all the inputs. It will select that stream based upon the following criteria: * for video, it is the stream with the highest resolution, * for audio, it is the stream with the most channels, * for subtitles, it is the first subtitle stream found but there’s a caveat. The output format’s default subtitle encoder can be either text-based or image-based, and only a subtitle stream of the same type will be chosen. In the case where several streams of the same type rate equally, the stream with the lowest index is chosen. Data or attachment streams are not automatically selected and can only be included using `-map`. #### 4.1.2 Manual stream selection When `-map` is used, only user-mapped streams are included in that output file, with one possible exception for filtergraph outputs described below. #### 4.1.3 Complex filtergraphs If there are any complex filtergraph output streams with unlabeled pads, they will be added to the first output file. This will lead to a fatal error if the stream type is not supported by the output format. In the absence of the map option, the inclusion of these streams leads to the automatic stream selection of their types being skipped. If map options are present, these filtergraph streams are included in addition to the mapped streams. Complex filtergraph output streams with labeled pads must be mapped once and exactly once. #### 4.1.4 Stream handling Stream handling is independent of stream selection, with an exception for subtitles described below. Stream handling is set via the `-codec` option addressed to streams within a specific _output_ file. In particular, codec options are applied by ffmpeg after the stream selection process and thus do not influence the latter. If no `-codec` option is specified for a stream type, ffmpeg will select the default encoder registered by the output file muxer. An exception exists for subtitles. If a subtitle encoder is specified for an output file, the first subtitle stream found of any type, text or image, will be included. ffmpeg does not validate if the specified encoder can convert the selected stream or if the converted stream is acceptable within the output format. This applies generally as well: when the user sets an encoder manually, the stream selection process cannot check if the encoded stream can be muxed into the output file. If it cannot, ffmpeg will abort and _all_ output files will fail to be processed. ### 4.2 Examples The following examples illustrate the behavior, quirks and limitations of ffmpeg’s stream selection methods. They assume the following three input files. input file 'A.avi' stream 0: video 640x360 stream 1: audio 2 channels input file 'B.mp4' stream 0: video 1920x1080 stream 1: audio 2 channels stream 2: subtitles (text) stream 3: audio 5.1 channels stream 4: subtitles (text) input file 'C.mkv' stream 0: video 1280x720 stream 1: audio 2 channels stream 2: subtitles (image) #### Example: automatic stream selection ffmpeg -i A.avi -i B.mp4 out1.mkv out2.wav -map 1:a -c:a copy out3.mov There are three output files specified, and for the first two, no `-map` options are set, so ffmpeg will select streams for these two files automatically. out1.mkv is a Matroska container file and accepts video, audio and subtitle streams, so ffmpeg will try to select one of each type. For video, it will select `stream 0` from B.mp4, which has the highest resolution among all the input video streams. For audio, it will select `stream 3` from B.mp4, since it has the greatest number of channels. For subtitles, it will select `stream 2` from B.mp4, which is the first subtitle stream from among A.avi and B.mp4. out2.wav accepts only audio streams, so only `stream 3` from B.mp4 is selected. For out3.mov, since a `-map` option is set, no automatic stream selection will occur. The `-map 1:a` option will select all audio streams from the second input B.mp4. No other streams will be included in this output file. For the first two outputs, all included streams will be transcoded. The encoders chosen will be the default ones registered by each output format, which may not match the codec of the selected input streams. For the third output, codec option for audio streams has been set to `copy`, so no decoding-filtering-encoding operations will occur, or _can_ occur. Packets of selected streams shall be conveyed from the input file and muxed within the output file. #### Example: automatic subtitles selection ffmpeg -i C.mkv out1.mkv -c:s dvdsub -an out2.mkv Although out1.mkv is a Matroska container file which accepts subtitle streams, only a video and audio stream shall be selected. The subtitle stream of C.mkv is image-based and the default subtitle encoder of the Matroska muxer is text-based, so a transcode operation for the subtitles is expected to fail and hence the stream isn’t selected. However, in out2.mkv, a subtitle encoder is specified in the command and so, the subtitle stream is selected, in addition to the video stream. The presence of `-an` disables audio stream selection for out2.mkv. #### Example: unlabeled filtergraph outputs ffmpeg -i A.avi -i C.mkv -i B.mp4 -filter\_complex "overlay" out1.mp4 out2.srt A filtergraph is setup here using the `-filter_complex` option and consists of a single video filter. The `overlay` filter requires exactly two video inputs, but none are specified, so the first two available video streams are used, those of A.avi and C.mkv. The output pad of the filter has no label and so is sent to the first output file out1.mp4. Due to this, automatic selection of the video stream is skipped, which would have selected the stream in B.mp4. The audio stream with most channels viz. `stream 3` in B.mp4, is chosen automatically. No subtitle stream is chosen however, since the MP4 format has no default subtitle encoder registered, and the user hasn’t specified a subtitle encoder. The 2nd output file, out2.srt, only accepts text-based subtitle streams. So, even though the first subtitle stream available belongs to C.mkv, it is image-based and hence skipped. The selected stream, `stream 2` in B.mp4, is the first text-based subtitle stream. #### Example: labeled filtergraph outputs ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter\_complex "\[1:v\]hue=s=0\[outv\];overlay;aresample" \\ -map '\[outv\]' -an out1.mp4 \\ out2.mkv \\ -map '\[outv\]' -map 1:a:0 out3.mkv The above command will fail, as the output pad labelled `[outv]` has been mapped twice. None of the output files shall be processed. ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter\_complex "\[1:v\]hue=s=0\[outv\];overlay;aresample" \\ -an out1.mp4 \\ out2.mkv \\ -map 1:a:0 out3.mkv This command above will also fail as the hue filter output has a label, `[outv]`, and hasn’t been mapped anywhere. The command should be modified as follows, ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter\_complex "\[1:v\]hue=s=0,split=2\[outv1\]\[outv2\];overlay;aresample" \\ -map '\[outv1\]' -an out1.mp4 \\ out2.mkv \\ -map '\[outv2\]' -map 1:a:0 out3.mkv The video stream from B.mp4 is sent to the hue filter, whose output is cloned once using the split filter, and both outputs labelled. Then a copy each is mapped to the first and third output files. The overlay filter, requiring two video inputs, uses the first two unused video streams. Those are the streams from A.avi and C.mkv. The overlay output isn’t labelled, so it is sent to the first output file out1.mp4, regardless of the presence of the `-map` option. The aresample filter is sent the first unused audio stream, that of A.avi. Since this filter output is also unlabelled, it too is mapped to the first output file. The presence of `-an` only suppresses automatic or manual stream selection of audio streams, not outputs sent from filtergraphs. Both these mapped streams shall be ordered before the mapped stream in out1.mp4. The video, audio and subtitle streams mapped to `out2.mkv` are entirely determined by automatic stream selection. out3.mkv consists of the cloned video output from the hue filter and the first audio stream from B.mp4. ## 5 Options All the numerical options, if not specified otherwise, accept a string representing a number as input, which may be followed by one of the SI unit prefixes, for example: ’K’, ’M’, or ’G’. If ’i’ is appended to the SI unit prefix, the complete prefix will be interpreted as a unit prefix for binary multiples, which are based on powers of 1024 instead of powers of 1000. Appending ’B’ to the SI unit prefix multiplies the value by 8. This allows using, for example: ’KB’, ’MiB’, ’G’ and ’B’ as number suffixes. Options which do not take arguments are boolean options, and set the corresponding value to true. They can be set to false by prefixing the option name with "no". For example using "-nofoo" will set the boolean option with name "foo" to false. Options that take arguments support a special syntax where the argument given on the command line is interpreted as a path to the file from which the actual argument value is loaded. To use this feature, add a forward slash ’/’ immediately before the option name (after the leading dash). E.g. ffmpeg -i INPUT -/filter:v filter.script OUTPUT will load a filtergraph description from the file named filter.script. ### 5.1 Stream specifiers Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) a given option belongs to. A stream specifier is a string generally appended to the option name and separated from it by a colon. E.g. `-codec:a:1 ac3` contains the `a:1` stream specifier, which matches the second audio stream. Therefore, it would select the ac3 codec for the second audio stream. A stream specifier can match several streams, so that the option is applied to all of them. E.g. the stream specifier in `-b:a 128k` matches all audio streams. An empty stream specifier matches all streams. For example, `-codec copy` or `-codec: copy` would copy all the streams without reencoding. Possible forms of stream specifiers are: stream\_index Matches the stream with this index. E.g. `-threads:1 4` would set the thread count for the second stream to 4. If stream\_index is used as an additional stream specifier (see below), then it selects stream number stream\_index from the matching streams. Stream numbering is based on the order of the streams as detected by libavformat except when a stream group specifier or program ID is also specified. In this case it is based on the ordering of the streams in the group or program. stream\_type\[:additional\_stream\_specifier\] stream\_type is one of following: ’v’ or ’V’ for video, ’a’ for audio, ’s’ for subtitle, ’d’ for data, and ’t’ for attachments. ’v’ matches all video streams, ’V’ only matches video streams which are not attached pictures, video thumbnails or cover arts. If additional\_stream\_specifier is used, then it matches streams which both have this type and match the additional\_stream\_specifier. Otherwise, it matches all streams of the specified type. g:group\_specifier\[:additional\_stream\_specifier\] Matches streams which are in the group with the specifier group\_specifier. if additional\_stream\_specifier is used, then it matches streams which both are part of the group and match the additional\_stream\_specifier. group\_specifier may be one of the following: group\_index Match the stream with this group index. #group\_id or i:group\_id Match the stream with this group id. p:program\_id\[:additional\_stream\_specifier\] Matches streams which are in the program with the id program\_id. If additional\_stream\_specifier is used, then it matches streams which both are part of the program and match the additional\_stream\_specifier. #stream\_id or i:stream\_id Match the stream by stream id (e.g. PID in MPEG-TS container). m:key\[:value\] Matches streams with the metadata tag key having the specified value. If value is not given, matches streams that contain the given tag with any value. The colon character ’:’ in key or value needs to be backslash-escaped. disp:dispositions\[:additional\_stream\_specifier\] Matches streams with the given disposition(s). dispositions is a list of one or more dispositions (as printed by the \-dispositions option) joined with ’+’. u Matches streams with usable configuration, the codec must be defined and the essential information such as video dimension or audio sample rate must be present. Note that in `ffmpeg`, matching by metadata will only work properly for input files. ### 5.2 Generic options These options are shared amongst the ff\* tools. \-L Show license. \-h, -?, -help, --help \[arg\] Show help. An optional parameter may be specified to print help about a specific item. If no argument is specified, only basic (non advanced) tool options are shown. Possible values of arg are: long Print advanced tool options in addition to the basic tool options. full Print complete list of options, including shared and private options for encoders, decoders, demuxers, muxers, filters, etc. decoder=decoder\_name Print detailed information about the decoder named decoder\_name. Use the \-decoders option to get a list of all decoders. encoder=encoder\_name Print detailed information about the encoder named encoder\_name. Use the \-encoders option to get a list of all encoders. demuxer=demuxer\_name Print detailed information about the demuxer named demuxer\_name. Use the \-formats option to get a list of all demuxers and muxers. muxer=muxer\_name Print detailed information about the muxer named muxer\_name. Use the \-formats option to get a list of all muxers and demuxers. filter=filter\_name Print detailed information about the filter named filter\_name. Use the \-filters option to get a list of all filters. bsf=bitstream\_filter\_name Print detailed information about the bitstream filter named bitstream\_filter\_name. Use the \-bsfs option to get a list of all bitstream filters. protocol=protocol\_name Print detailed information about the protocol named protocol\_name. Use the \-protocols option to get a list of all protocols. \-version Show version. \-buildconf Show the build configuration, one option per line. \-formats Show available formats (including devices). \-demuxers Show available demuxers. \-muxers Show available muxers. \-devices Show available devices. \-codecs Show all codecs known to libavcodec. Note that the term ’codec’ is used throughout this documentation as a shortcut for what is more correctly called a media bitstream format. \-decoders Show available decoders. \-encoders Show all available encoders. \-bsfs Show available bitstream filters. \-protocols Show available protocols. \-filters Show available libavfilter filters. \-pix\_fmts Show available pixel formats. \-sample\_fmts Show available sample formats. \-layouts Show channel names and standard channel layouts. \-dispositions Show stream dispositions. \-colors Show recognized color names. \-sources device\[,opt1\=val1\[,opt2\=val2\]...\] Show autodetected sources of the input device. Some devices may provide system-dependent source names that cannot be autodetected. The returned list cannot be assumed to be always complete. ffmpeg -sources pulse,server=192.168.0.4 \-sinks device\[,opt1\=val1\[,opt2\=val2\]...\] Show autodetected sinks of the output device. Some devices may provide system-dependent sink names that cannot be autodetected. The returned list cannot be assumed to be always complete. ffmpeg -sinks pulse,server=192.168.0.4 \-loglevel \[flags+\]loglevel | -v \[flags+\]loglevel Set logging level and flags used by the library. The optional flags prefix can consist of the following values: ‘repeat’ Indicates that repeated log output should not be compressed to the first line and the "Last message repeated n times" line will be omitted. ‘level’ Indicates that log output should add a `[level]` prefix to each message line. This can be used as an alternative to log coloring, e.g. when dumping the log to file. ‘time’ Indicates that log lines should be prefixed with time information. ‘datetime’ Indicates that log lines should be prefixed with date and time information. Flags can also be used alone by adding a ’+’/’-’ prefix to set/reset a single flag without affecting other flags or changing loglevel. When setting both flags and loglevel, a ’+’ separator is expected between the last flags value and before loglevel. loglevel is a string or a number containing one of the following values: ‘quiet, -8’ Show nothing at all; be silent. ‘panic, 0’ Only show fatal errors which could lead the process to crash, such as an assertion failure. This is not currently used for anything. ‘fatal, 8’ Only show fatal errors. These are errors after which the process absolutely cannot continue. ‘error, 16’ Show all errors, including ones which can be recovered from. ‘warning, 24’ Show all warnings and errors. Any message related to possibly incorrect or unexpected events will be shown. ‘info, 32’ Show informative messages during processing. This is in addition to warnings and errors. This is the default value. ‘verbose, 40’ Same as `info`, except more verbose. ‘debug, 48’ Show everything, including debugging information. ‘trace, 56’ For example to enable repeated log output, add the `level` prefix, and set loglevel to `verbose`: ffmpeg -loglevel repeat+level+verbose -i input output Another example that enables repeated log output without affecting current state of `level` prefix flag or loglevel: ffmpeg \[...\] -loglevel +repeat By default the program logs to stderr. If coloring is supported by the terminal, colors are used to mark errors and warnings. Log coloring can be disabled setting the environment variable `AV_LOG_FORCE_NOCOLOR`, or can be forced setting the environment variable `AV_LOG_FORCE_COLOR`. \-report Dump full command line and log output to a file named `program-YYYYMMDD-HHMMSS.log` in the current directory. This file can be useful for bug reports. It also implies `-loglevel debug`. Setting the environment variable `FFREPORT` to any value has the same effect. If the value is a ’:’-separated key=value sequence, these options will affect the report; option values must be escaped if they contain special characters or the options delimiter ’:’ (see the “Quoting and escaping” section in the ffmpeg-utils manual). The following options are recognized: file set the file name to use for the report; `%p` is expanded to the name of the program, `%t` is expanded to a timestamp, `%%` is expanded to a plain `%` level set the log verbosity level using a numerical value (see `-loglevel`). For example, to output a report to a file named ffreport.log using a log level of `32` (alias for log level `info`): FFREPORT=file=ffreport.log:level=32 ffmpeg -i input output Errors in parsing the environment variable are not fatal, and will not appear in the report. \-hide\_banner Suppress printing banner. All FFmpeg tools will normally show a copyright notice, build options and library versions. This option can be used to suppress printing this information. \-cpuflags flags (_global_) Allows setting and clearing cpu flags. This option is intended for testing. Do not use it unless you know what you’re doing. ffmpeg -cpuflags -sse+mmx ... ffmpeg -cpuflags mmx ... ffmpeg -cpuflags 0 ... Possible flags for this option are: ‘x86’ ‘mmx’ ‘mmxext’ ‘sse’ ‘sse2’ ‘sse2slow’ ‘sse3’ ‘sse3slow’ ‘ssse3’ ‘atom’ ‘sse4.1’ ‘sse4.2’ ‘avx’ ‘avx2’ ‘xop’ ‘fma3’ ‘fma4’ ‘3dnow’ ‘3dnowext’ ‘bmi1’ ‘bmi2’ ‘cmov’ ‘ARM’ ‘armv5te’ ‘armv6’ ‘armv6t2’ ‘vfp’ ‘vfpv3’ ‘neon’ ‘setend’ ‘AArch64’ ‘armv8’ ‘vfp’ ‘neon’ ‘PowerPC’ ‘altivec’ ‘Specific Processors’ ‘pentium2’ ‘pentium3’ ‘pentium4’ ‘k6’ ‘k62’ ‘athlon’ ‘athlonxp’ ‘k8’ \-cpucount count (_global_) Override detection of CPU count. This option is intended for testing. Do not use it unless you know what you’re doing. ffmpeg -cpucount 2 \-max\_alloc bytes Set the maximum size limit for allocating a block on the heap by ffmpeg’s family of malloc functions. Exercise **extreme caution** when using this option. Don’t use if you do not understand the full consequence of doing so. Default is INT\_MAX. ### 5.3 AVOptions These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the \-help option. They are separated into two categories: generic These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs. private These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs. For example to write an ID3v2.3 header instead of a default ID3v2.4 to an MP3 file, use the id3v2\_version private option of the MP3 muxer: ffmpeg -i input.flac -id3v2\_version 3 out.mp3 All codec AVOptions are per-stream, and thus a stream specifier should be attached to them: ffmpeg -i multichannel.mxf -map 0:v:0 -map 0:a:0 -map 0:a:0 -c:a:0 ac3 -b:a:0 640k -ac:a:1 2 -c:a:1 aac -b:2 128k out.mp4 In the above example, a multichannel audio stream is mapped twice for output. The first instance is encoded with codec ac3 and bitrate 640k. The second instance is downmixed to 2 channels and encoded with codec aac. A bitrate of 128k is specified for it using absolute index of the output stream. Note: the \-nooption syntax cannot be used for boolean AVOptions, use \-option 0/\-option 1. Note: the old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon. ### 5.4 Main options \-f fmt (_input/output_) Force input or output file format. The format is normally auto detected for input files and guessed from the file extension for output files, so this option is not needed in most cases. \-i url (_input_) input file url \-y (_global_) Overwrite output files without asking. \-n (_global_) Do not overwrite output files, and exit immediately if a specified output file already exists. \-stream\_loop number (_input_) Set number of times input stream shall be looped. Loop 0 means no loop, loop -1 means infinite loop. \-recast\_media (_global_) Allow forcing a decoder of a different media type than the one detected or designated by the demuxer. Useful for decoding media data muxed as data streams. \-c\[:stream\_specifier\] codec (_input/output,per-stream_) \-codec\[:stream\_specifier\] codec (_input/output,per-stream_) Select an encoder (when used before an output file) or a decoder (when used before an input file) for one or more streams. codec is the name of a decoder/encoder or a special value `copy` (output only) to indicate that the stream is not to be re-encoded. For example ffmpeg -i INPUT -map 0 -c:v libx264 -c:a copy OUTPUT encodes all video streams with libx264 and copies all audio streams. For each stream, the last matching `c` option is applied, so ffmpeg -i INPUT -map 0 -c copy -c:v:1 libx264 -c:a:137 libvorbis OUTPUT will copy all the streams except the second video, which will be encoded with libx264, and the 138th audio, which will be encoded with libvorbis. \-t duration (_input/output_) When used as an input option (before `-i`), limit the duration of data read from the input file. When used as an output option (before an output url), stop writing the output after its duration reaches duration. duration must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. \-to and -t are mutually exclusive and -t has priority. \-to position (_input/output_) Stop writing the output or reading the input at position. position must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. \-to and -t are mutually exclusive and -t has priority. \-fs limit\_size (_output_) Set the file size limit, expressed in bytes. No further chunk of bytes is written after the limit is exceeded. The size of the output file is slightly more than the requested file size. \-ss position (_input/output_) When used as an input option (before `-i`), seeks in this input file to position. Note that in most formats it is not possible to seek exactly, so `ffmpeg` will seek to the closest seek point before position. When transcoding and \-accurate\_seek is enabled (the default), this extra segment between the seek point and position will be decoded and discarded. When doing stream copy or when \-noaccurate\_seek is used, it will be preserved. When used as an output option (before an output url), decodes but discards input until the timestamps reach position. position must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. \-sseof position (_input_) Like the `-ss` option but relative to the "end of file". That is negative values are earlier in the file, 0 is at EOF. \-isync input\_index (_input_) Assign an input as a sync source. This will take the difference between the start times of the target and reference inputs and offset the timestamps of the target file by that difference. The source timestamps of the two inputs should derive from the same clock source for expected results. If `copyts` is set then `start_at_zero` must also be set. If either of the inputs has no starting timestamp then no sync adjustment is made. Acceptable values are those that refer to a valid ffmpeg input index. If the sync reference is the target index itself or \-1, then no adjustment is made to target timestamps. A sync reference may not itself be synced to any other input. Default value is \-1. \-itsoffset offset (_input_) Set the input time offset. offset must be a time duration specification, see (ffmpeg-utils)the Time duration section in the ffmpeg-utils(1) manual. The offset is added to the timestamps of the input files. Specifying a positive offset means that the corresponding streams are delayed by the time duration specified in offset. \-itsscale scale (_input,per-stream_) Rescale input timestamps. scale should be a floating point number. \-timestamp date (_output_) Set the recording timestamp in the container. date must be a date specification, see (ffmpeg-utils)the Date section in the ffmpeg-utils(1) manual. \-metadata\[:metadata\_specifier\] key\=value (_output,per-metadata_) Set a metadata key/value pair. An optional metadata\_specifier may be given to set metadata on streams, chapters or programs. See `-map_metadata` documentation for details. This option overrides metadata set with `-map_metadata`. It is also possible to delete metadata by using an empty value. For example, for setting the title in the output file: ffmpeg -i in.avi -metadata title="my title" out.flv To set the language of the first audio stream: ffmpeg -i INPUT -metadata:s:a:0 language=eng OUTPUT \-disposition\[:stream\_specifier\] value (_output,per-stream_) Sets the disposition flags for a stream. Default value: by default, all disposition flags are copied from the input stream, unless the output stream this option applies to is fed by a complex filtergraph - in that case no disposition flags are set by default. value is a sequence of disposition flags separated by ’+’ or ’-’. A ’+’ prefix adds the given disposition, ’-’ removes it. If the first flag is also prefixed with ’+’ or ’-’, the resulting disposition is the default value updated by value. If the first flag is not prefixed, the resulting disposition is value. It is also possible to clear the disposition by setting it to 0. If no `-disposition` options were specified for an output file, ffmpeg will automatically set the ’default’ disposition flag on the first stream of each type, when there are multiple streams of this type in the output file and no stream of that type is already marked as default. The `-dispositions` option lists the known disposition flags. For example, to make the second audio stream the default stream: ffmpeg -i in.mkv -c copy -disposition:a:1 default out.mkv To make the second subtitle stream the default stream and remove the default disposition from the first subtitle stream: ffmpeg -i in.mkv -c copy -disposition:s:0 0 -disposition:s:1 default out.mkv To add an embedded cover/thumbnail: ffmpeg -i in.mp4 -i IMAGE -map 0 -map 1 -c copy -c:v:1 png -disposition:v:1 attached\_pic out.mp4 To add the ’original’ and remove the ’comment’ disposition flag from the first audio stream without removing its other disposition flags: ffmpeg -i in.mkv -c copy -disposition:a:0 +original-comment out.mkv To remove the ’original’ and add the ’comment’ disposition flag to the first audio stream without removing its other disposition flags: ffmpeg -i in.mkv -c copy -disposition:a:0 -original+comment out.mkv To set only the ’original’ and ’comment’ disposition flags on the first audio stream (and remove its other disposition flags): ffmpeg -i in.mkv -c copy -disposition:a:0 original+comment out.mkv To remove all disposition flags from the first audio stream: ffmpeg -i in.mkv -c copy -disposition:a:0 0 out.mkv Not all muxers support embedded thumbnails, and those who do, only support a few formats, like JPEG or PNG. \-program \[title=title:\]\[program\_num=program\_num:\]st=stream\[:st=stream...\] (_output_) Creates a program with the specified title, program\_num and adds the specified stream(s) to it. \-stream\_group \[map=input\_file\_id\=stream\_group\]\[type=type:\]st=stream\[:st=stream\]\[:stg=stream\_group\]\[:id=stream\_group\_id...\] (_output_) Creates a stream group of the specified type and stream\_group\_id, or by mapping an input group, adding the specified stream(s) and/or previously defined stream\_group(s) to it. type can be one of the following: iamf\_audio\_element Groups streams that belong to the same IAMF Audio Element For this group type, the following options are available audio\_element\_type The Audio Element type. The following values are supported: channel Scalable channel audio representation scene Ambisonics representation demixing Demixing information used to reconstruct a scalable channel audio representation. This option must be separated from the rest with a ’,’, and takes the following key=value options parameter\_id An identifier parameters blocks in frames may refer to dmixp\_mode A pre-defined combination of demixing parameters recon\_gain Recon gain information used to reconstruct a scalable channel audio representation. This option must be separated from the rest with a ’,’, and takes the following key=value options parameter\_id An identifier parameters blocks in frames may refer to layer A layer defining a Channel Layout in the Audio Element. This option must be separated from the rest with a ’,’. Several ’,’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options ch\_layout The layer’s channel layout flags The following flags are available: recon\_gain Wether to signal if recon\_gain is present as metadata in parameter blocks within frames output\_gain output\_gain\_flags Which channels output\_gain applies to. The following flags are available: FL FR BL BR TFL TFR ambisonics\_mode The ambisonics mode. This has no effect if audio\_element\_type is set to channel. The following values are supported: mono Each ambisonics channel is coded as an individual mono stream in the group default\_w Default weight value iamf\_mix\_presentation Groups streams that belong to all IAMF Audio Element the same IAMF Mix Presentation references For this group type, the following options are available submix A sub-mix within the Mix Presentation. This option must be separated from the rest with a ’,’. Several ’,’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options parameter\_id An identifier parameters blocks in frames may refer to, for post-processing the mixed audio signal to generate the audio signal for playback parameter\_rate The sample rate duration fields in parameters blocks in frames that refer to this parameter\_id are expressed as default\_mix\_gain Default mix gain value to apply when there are no parameter blocks sharing the same parameter\_id for a given frame element References an Audio Element used in this Mix Presentation to generate the final output audio signal for playback. This option must be separated from the rest with a ’|’. Several ’|’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options: stg The stream\_group\_id for an Audio Element which this sub-mix refers to parameter\_id An identifier parameters blocks in frames may refer to, for applying any processing to the referenced and rendered Audio Element before being summed with other processed Audio Elements parameter\_rate The sample rate duration fields in parameters blocks in frames that refer to this parameter\_id are expressed as default\_mix\_gain Default mix gain value to apply when there are no parameter blocks sharing the same parameter\_id for a given frame annotations A key=value string describing the sub-mix element where "key" is a string conforming to BCP-47 that specifies the language for the "value" string. "key" must be the same as the one in the mix’s annotations headphones\_rendering\_mode Indicates whether the input channel-based Audio Element is rendered to stereo loudspeakers or spatialized with a binaural renderer when played back on headphones. This has no effect if the referenced Audio Element’s audio\_element\_type is set to channel. The following values are supported: stereo binaural layout Specifies the layouts for this sub-mix on which the loudness information was measured. This option must be separated from the rest with a ’|’. Several ’|’ separated entries can be defined, and at least one must be set. It takes the following ":"-separated key=value options: layout\_type loudspeakers The layout follows the loudspeaker sound system convention of ITU-2051-3. binaural The layout is binaural. sound\_system Channel layout matching one of Sound Systems A to J of ITU-2051-3, plus 7.1.2 and 3.1.2 This has no effect if layout\_type is set to binaural. integrated\_loudness The program integrated loudness information, as defined in ITU-1770-4. digital\_peak The digital (sampled) peak value of the audio signal, as defined in ITU-1770-4. true\_peak The true peak of the audio signal, as defined in ITU-1770-4. dialog\_anchored\_loudness The Dialogue loudness information, as defined in ITU-1770-4. album\_anchored\_loudness The Album loudness information, as defined in ITU-1770-4. annotations A key=value string string describing the mix where "key" is a string conforming to BCP-47 that specifies the language for the "value" string. "key" must be the same as the ones in all sub-mix element’s annotationss E.g. to create an scalable 5.1 IAMF file from several WAV input files ffmpeg -i front.wav -i back.wav -i center.wav -i lfe.wav -map 0:0 -map 1:0 -map 2:0 -map 3:0 -c:a opus -stream\_group type=iamf\_audio\_element:id=1:st=0:st=1:st=2:st=3, demixing=parameter\_id=998, recon\_gain=parameter\_id=101, layer=ch\_layout=stereo, layer=ch\_layout=5.1(side), -stream\_group type=iamf\_mix\_presentation:id=2:stg=0:annotations=en-us=Mix\_Presentation, submix=parameter\_id=100:parameter\_rate=48000|element=stg=0:parameter\_id=100:annotations=en-us=Scalable\_Submix|layout=sound\_system=stereo|layout=sound\_system=5.1(side) -streamid 0:0 -streamid 1:1 -streamid 2:2 -streamid 3:3 output.iamf To copy the two stream groups (Audio Element and Mix Presentation) from an input IAMF file with four streams into an mp4 output ffmpeg -i input.iamf -c:a copy -stream\_group map=0=0:st=0:st=1:st=2:st=3 -stream\_group map=0=1:stg=0 -streamid 0:0 -streamid 1:1 -streamid 2:2 -streamid 3:3 output.mp4 \-target type (_output_) Specify target file type (`vcd`, `svcd`, `dvd`, `dv`, `dv50`). type may be prefixed with `pal-`, `ntsc-` or `film-` to use the corresponding standard. All the format options (bitrate, codecs, buffer sizes) are then set automatically. You can just type: ffmpeg -i myfile.avi -target vcd /tmp/vcd.mpg Nevertheless you can specify additional options as long as you know they do not conflict with the standard, as in: ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg The parameters set for each target are as follows. **VCD** pal: -f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324 -s 352x288 -r 25 -codec:v mpeg1video -g 15 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680 -ar 44100 -ac 2 -codec:a mp2 -b:a 224k ntsc: -f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324 -s 352x240 -r 30000/1001 -codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680 -ar 44100 -ac 2 -codec:a mp2 -b:a 224k film: -f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324 -s 352x240 -r 24000/1001 -codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680 -ar 44100 -ac 2 -codec:a mp2 -b:a 224k **SVCD** pal: -f svcd -packetsize 2324 -s 480x576 -pix\_fmt yuv420p -r 25 -codec:v mpeg2video -g 15 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan\_offset 1 -ar 44100 -codec:a mp2 -b:a 224k ntsc: -f svcd -packetsize 2324 -s 480x480 -pix\_fmt yuv420p -r 30000/1001 -codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan\_offset 1 -ar 44100 -codec:a mp2 -b:a 224k film: -f svcd -packetsize 2324 -s 480x480 -pix\_fmt yuv420p -r 24000/1001 -codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan\_offset 1 -ar 44100 -codec:a mp2 -b:a 224k **DVD** pal: -f dvd -muxrate 10080k -packetsize 2048 -s 720x576 -pix\_fmt yuv420p -r 25 -codec:v mpeg2video -g 15 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008 -ar 48000 -codec:a ac3 -b:a 448k ntsc: -f dvd -muxrate 10080k -packetsize 2048 -s 720x480 -pix\_fmt yuv420p -r 30000/1001 -codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008 -ar 48000 -codec:a ac3 -b:a 448k film: -f dvd -muxrate 10080k -packetsize 2048 -s 720x480 -pix\_fmt yuv420p -r 24000/1001 -codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008 -ar 48000 -codec:a ac3 -b:a 448k **DV** pal: -f dv -s 720x576 -pix\_fmt yuv420p -r 25 -ar 48000 -ac 2 ntsc: -f dv -s 720x480 -pix\_fmt yuv411p -r 30000/1001 -ar 48000 -ac 2 film: -f dv -s 720x480 -pix\_fmt yuv411p -r 24000/1001 -ar 48000 -ac 2 The `dv50` target is identical to the `dv` target except that the pixel format set is `yuv422p` for all three standards. Any user-set value for a parameter above will override the target preset value. In that case, the output may not comply with the target standard. \-dn (_input/output_) As an input option, blocks all data streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables data recording i.e. automatic selection or mapping of any data stream. For full manual control see the `-map` option. \-dframes number (_output_) Set the number of data frames to output. This is an obsolete alias for `-frames:d`, which you should use instead. \-frames\[:stream\_specifier\] framecount (_output,per-stream_) Stop writing to the stream after framecount frames. \-q\[:stream\_specifier\] q (_output,per-stream_) \-qscale\[:stream\_specifier\] q (_output,per-stream_) Use fixed quality scale (VBR). The meaning of q/qscale is codec-dependent. If qscale is used without a stream\_specifier then it applies only to the video stream, this is to maintain compatibility with previous behavior and as specifying the same codec specific value to 2 different codecs that is audio and video generally is not what is intended when no stream\_specifier is used. \-filter\[:stream\_specifier\] filtergraph (_output,per-stream_) Create the filtergraph specified by filtergraph and use it to filter the stream. filtergraph is a description of the filtergraph to apply to the stream, and must have a single input and a single output of the same type of the stream. In the filtergraph, the input is associated to the label `in`, and the output to the label `out`. See the ffmpeg-filters manual for more information about the filtergraph syntax. See the \-filter\_complex option if you want to create filtergraphs with multiple inputs and/or outputs. \-reinit\_filter\[:stream\_specifier\] integer (_input,per-stream_) This boolean option determines if the filtergraph(s) to which this stream is fed gets reinitialized when input frame parameters change mid-stream. This option is enabled by default as most video and all audio filters cannot handle deviation in input frame properties. Upon reinitialization, existing filter state is lost, like e.g. the frame count `n` reference available in some filters. Any frames buffered at time of reinitialization are lost. The properties where a change triggers reinitialization are, for video, frame resolution or pixel format; for audio, sample format, sample rate, channel count or channel layout. \-drop\_changed\[:stream\_specifier\] integer (_input,per-stream_) This boolean option determines whether a frame with differing frame parameters mid-stream gets dropped instead of leading to filtergraph reinitialization, as that would lead to loss of filter state. Generally useful to avoid corrupted yet decodable packets in live streaming inputs. Default is false. \-filter\_threads nb\_threads (_global_) Defines how many threads are used to process a filter pipeline. Each pipeline will produce a thread pool with this many threads available for parallel processing. The default is the number of available CPUs. \-pre\[:stream\_specifier\] preset\_name (_output,per-stream_) Specify the preset for matching stream(s). \-stats (_global_) Log encoding progress/statistics as "info"-level log (see `-loglevel`). It is on by default, to explicitly disable it you need to specify `-nostats`. \-stats\_period time (_global_) Set period at which encoding progress/statistics are updated. Default is 0.5 seconds. \-progress url (_global_) Send program-friendly progress information to url. Progress information is written periodically and at the end of the encoding process. It is made of "key\=value" lines. key consists of only alphanumeric characters. The last key of a sequence of progress information is always "progress" with the value "continue" or "end". The update period is set using `-stats_period`. For example, log progress information to stdout: ffmpeg -progress pipe:1 -i in.mkv out.mkv \-stdin Enable interaction on standard input. On by default unless standard input is used as an input. To explicitly disable interaction you need to specify `-nostdin`. Disabling interaction on standard input is useful, for example, if ffmpeg is in the background process group. Roughly the same result can be achieved with `ffmpeg ... < /dev/null` but it requires a shell. \-debug\_ts (_global_) Print timestamp/latency information. It is off by default. This option is mostly useful for testing and debugging purposes, and the output format may change from one version to another, so it should not be employed by portable scripts. See also the option `-fdebug ts`. \-attach filename (_output_) Add an attachment to the output file. This is supported by a few formats like Matroska for e.g. fonts used in rendering subtitles. Attachments are implemented as a specific type of stream, so this option will add a new stream to the file. It is then possible to use per-stream options on this stream in the usual way. Attachment streams created with this option will be created after all the other streams (i.e. those created with `-map` or automatic mappings). Note that for Matroska you also have to set the mimetype metadata tag: ffmpeg -i INPUT -attach DejaVuSans.ttf -metadata:s:2 mimetype=application/x-truetype-font out.mkv (assuming that the attachment stream will be third in the output file). \-dump\_attachment\[:stream\_specifier\] filename (_input,per-stream_) Extract the matching attachment stream into a file named filename. If filename is empty, then the value of the `filename` metadata tag will be used. E.g. to extract the first attachment to a file named ’out.ttf’: ffmpeg -dump\_attachment:t:0 out.ttf -i INPUT To extract all attachments to files determined by the `filename` tag: ffmpeg -dump\_attachment:t "" -i INPUT Technical note – attachments are implemented as codec extradata, so this option can actually be used to extract extradata from any stream, not just attachments. ### 5.5 Video Options \-vframes number (_output_) Set the number of video frames to output. This is an obsolete alias for `-frames:v`, which you should use instead. \-r\[:stream\_specifier\] fps (_input/output,per-stream_) Set frame rate (Hz value, fraction or abbreviation). As an input option, ignore any timestamps stored in the file and instead generate timestamps assuming constant frame rate fps. This is not the same as the \-framerate option used for some input formats like image2 or v4l2 (it used to be the same in older versions of FFmpeg). If in doubt use \-framerate instead of the input option \-r. As an output option: video encoding Duplicate or drop frames right before encoding them to achieve constant output frame rate fps. video streamcopy Indicate to the muxer that fps is the stream frame rate. No data is dropped or duplicated in this case. This may produce invalid files if fps does not match the actual stream frame rate as determined by packet timestamps. See also the `setts` bitstream filter. \-fpsmax\[:stream\_specifier\] fps (_output,per-stream_) Set maximum frame rate (Hz value, fraction or abbreviation). Clamps output frame rate when output framerate is auto-set and is higher than this value. Useful in batch processing or when input framerate is wrongly detected as very high. It cannot be set together with `-r`. It is ignored during streamcopy. \-s\[:stream\_specifier\] size (_input/output,per-stream_) Set frame size. As an input option, this is a shortcut for the video\_size private option, recognized by some demuxers for which the frame size is either not stored in the file or is configurable – e.g. raw video or video grabbers. As an output option, this inserts the `scale` video filter to the _end_ of the corresponding filtergraph. Please use the `scale` filter directly to insert it at the beginning or some other place. The format is ‘wxh’ (default - same as source). \-aspect\[:stream\_specifier\] aspect (_output,per-stream_) Set the video display aspect ratio specified by aspect. aspect can be a floating point number string, or a string of the form num:den, where num and den are the numerator and denominator of the aspect ratio. For example "4:3", "16:9", "1.3333", and "1.7777" are valid argument values. If used together with \-vcodec copy, it will affect the aspect ratio stored at container level, but not the aspect ratio stored in encoded frames, if it exists. \-display\_rotation\[:stream\_specifier\] rotation (_input,per-stream_) Set video rotation metadata. rotation is a decimal number specifying the amount in degree by which the video should be rotated counter-clockwise before being displayed. This option overrides the rotation/display transform metadata stored in the file, if any. When the video is being transcoded (rather than copied) and `-autorotate` is enabled, the video will be rotated at the filtering stage. Otherwise, the metadata will be written into the output file if the muxer supports it. If the `-display_hflip` and/or `-display_vflip` options are given, they are applied after the rotation specified by this option. \-display\_hflip\[:stream\_specifier\] (_input,per-stream_) Set whether on display the image should be horizontally flipped. See the `-display_rotation` option for more details. \-display\_vflip\[:stream\_specifier\] (_input,per-stream_) Set whether on display the image should be vertically flipped. See the `-display_rotation` option for more details. \-vn (_input/output_) As an input option, blocks all video streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables video recording i.e. automatic selection or mapping of any video stream. For full manual control see the `-map` option. \-vcodec codec (_output_) Set the video codec. This is an alias for `-codec:v`. \-pass\[:stream\_specifier\] n (_output,per-stream_) Select the pass number (1 or 2). It is used to do two-pass video encoding. The statistics of the video are recorded in the first pass into a log file (see also the option -passlogfile), and in the second pass that log file is used to generate the video at the exact requested bitrate. On pass 1, you may just deactivate audio and set output to null, examples for Windows and Unix: ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y NUL ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y /dev/null \-passlogfile\[:stream\_specifier\] prefix (_output,per-stream_) Set two-pass log file name prefix to prefix, the default file name prefix is “ffmpeg2pass”. The complete file name will be PREFIX-N.log, where N is a number specific to the output stream \-vf filtergraph (_output_) Create the filtergraph specified by filtergraph and use it to filter the stream. This is an alias for `-filter:v`, see the \-filter option. \-autorotate Automatically rotate the video according to file metadata. Enabled by default, use \-noautorotate to disable it. \-autoscale Automatically scale the video according to the resolution of first frame. Enabled by default, use \-noautoscale to disable it. When autoscale is disabled, all output frames of filter graph might not be in the same resolution and may be inadequate for some encoder/muxer. Therefore, it is not recommended to disable it unless you really know what you are doing. Disable autoscale at your own risk. ### 5.6 Advanced Video options \-pix\_fmt\[:stream\_specifier\] format (_input/output,per-stream_) Set pixel format. Use `-pix_fmts` to show all the supported pixel formats. If the selected pixel format can not be selected, ffmpeg will print a warning and select the best pixel format supported by the encoder. If pix\_fmt is prefixed by a `+`, ffmpeg will exit with an error if the requested pixel format can not be selected, and automatic conversions inside filtergraphs are disabled. If pix\_fmt is a single `+`, ffmpeg selects the same pixel format as the input (or graph output) and automatic conversions are disabled. \-sws\_flags flags (_input/output_) Set default flags for the libswscale library. These flags are used by automatically inserted `scale` filters and those within simple filtergraphs, if not overridden within the filtergraph definition. See the (ffmpeg-scaler)ffmpeg-scaler manual for a list of scaler options. \-rc\_override\[:stream\_specifier\] override (_output,per-stream_) Rate control override for specific intervals, formatted as "int,int,int" list separated with slashes. Two first values are the beginning and end frame numbers, last one is quantizer to use if positive, or quality factor if negative. \-vstats Dump video coding statistics to vstats\_HHMMSS.log. See the vstats file format section for the format description. \-vstats\_file file Dump video coding statistics to file. See the vstats file format section for the format description. \-vstats\_version file Specify which version of the vstats format to use. Default is `2`. See the vstats file format section for the format description. \-vtag fourcc/tag (_output_) Force video tag/fourcc. This is an alias for `-tag:v`. \-force\_key\_frames\[:stream\_specifier\] time\[,time...\] (_output,per-stream_) \-force\_key\_frames\[:stream\_specifier\] expr:expr (_output,per-stream_) \-force\_key\_frames\[:stream\_specifier\] source (_output,per-stream_) force\_key\_frames can take arguments of the following form: time\[,time...\] If the argument consists of timestamps, ffmpeg will round the specified times to the nearest output timestamp as per the encoder time base and force a keyframe at the first frame having timestamp equal or greater than the computed timestamp. Note that if the encoder time base is too coarse, then the keyframes may be forced on frames with timestamps lower than the specified time. The default encoder time base is the inverse of the output framerate but may be set otherwise via `-enc_time_base`. If one of the times is "`chapters`\[delta\]", it is expanded into the time of the beginning of all chapters in the file, shifted by delta, expressed as a time in seconds. This option can be useful to ensure that a seek point is present at a chapter mark or any other designated place in the output file. For example, to insert a key frame at 5 minutes, plus key frames 0.1 second before the beginning of every chapter: \-force\_key\_frames 0:05:00,chapters-0.1 expr:expr If the argument is prefixed with `expr:`, the string expr is interpreted like an expression and is evaluated for each frame. A key frame is forced in case the evaluation is non-zero. The expression in expr can contain the following constants: n the number of current processed frame, starting from 0 n\_forced the number of forced frames prev\_forced\_n the number of the previous forced frame, it is `NAN` when no keyframe was forced yet prev\_forced\_t the time of the previous forced frame, it is `NAN` when no keyframe was forced yet t the time of the current processed frame For example to force a key frame every 5 seconds, you can specify: \-force\_key\_frames expr:gte(t,n\_forced\*5) To force a key frame 5 seconds after the time of the last forced one, starting from second 13: \-force\_key\_frames expr:if(isnan(prev\_forced\_t),gte(t,13),gte(t,prev\_forced\_t+5)) source If the argument is `source`, ffmpeg will force a key frame if the current frame being encoded is marked as a key frame in its source. In cases where this particular source frame has to be dropped, enforce the next available frame to become a key frame instead. Note that forcing too many keyframes is very harmful for the lookahead algorithms of certain encoders: using fixed-GOP options or similar would be more efficient. \-apply\_cropping\[:stream\_specifier\] source (_input,per-stream_) Automatically crop the video after decoding according to file metadata. Default is _all_. none (0) Don’t apply any cropping metadata. all (1) Apply both codec and container level croppping. This is the default mode. codec (2) Apply codec level croppping. container (3) Apply container level croppping. \-copyinkf\[:stream\_specifier\] (_output,per-stream_) When doing stream copy, copy also non-key frames found at the beginning. \-init\_hw\_device type\[=name\]\[:device\[,key=value...\]\] Initialise a new hardware device of type type called name, using the given device parameters. If no name is specified it will receive a default name of the form "type%d". The meaning of device and the following arguments depends on the device type: cuda device is the number of the CUDA device. The following options are recognized: primary\_ctx If set to 1, uses the primary device context instead of creating a new one. Examples: _\-init\_hw\_device cuda:1_ Choose the second device on the system. _\-init\_hw\_device cuda:0,primary\_ctx=1_ Choose the first device and use the primary device context. dxva2 device is the number of the Direct3D 9 display adapter. d3d11va device is the number of the Direct3D 11 display adapter. If not specified, it will attempt to use the default Direct3D 11 display adapter or the first Direct3D 11 display adapter whose hardware VendorId is specified by ‘vendor\_id’. Examples: _\-init\_hw\_device d3d11va_ Create a d3d11va device on the default Direct3D 11 display adapter. _\-init\_hw\_device d3d11va:1_ Create a d3d11va device on the Direct3D 11 display adapter specified by index 1. _\-init\_hw\_device d3d11va:,vendor\_id=0x8086_ Create a d3d11va device on the first Direct3D 11 display adapter whose hardware VendorId is 0x8086. vaapi device is either an X11 display name, a DRM render node or a DirectX adapter index. If not specified, it will attempt to open the default X11 display (_$DISPLAY_) and then the first DRM render node (_/dev/dri/renderD128_), or the default DirectX adapter on Windows. The following options are recognized: kernel\_driver When device is not specified, use this option to specify the name of the kernel driver associated with the desired device. This option is available only when the hardware acceleration method _drm_ and _vaapi_ are enabled. vendor\_id When device and kernel\_driver are not specified, use this option to specify the vendor id associated with the desired device. This option is available only when the hardware acceleration method _drm_ and _vaapi_ are enabled and _kernel\_driver_ is not specified. Examples: _\-init\_hw\_device vaapi_ Create a vaapi device on the default device. _\-init\_hw\_device vaapi:/dev/dri/renderD129_ Create a vaapi device on DRM render node /dev/dri/renderD129. _\-init\_hw\_device vaapi:1_ Create a vaapi device on DirectX adapter 1. _\-init\_hw\_device vaapi:,kernel\_driver=i915_ Create a vaapi device on a device associated with kernel driver ‘i915’. _\-init\_hw\_device vaapi:,vendor\_id=0x8086_ Create a vaapi device on a device associated with vendor id ‘0x8086’. vdpau device is an X11 display name. If not specified, it will attempt to open the default X11 display (_$DISPLAY_). qsv device selects a value in ‘MFX\_IMPL\_\*’. Allowed values are: auto sw hw auto\_any hw\_any hw2 hw3 hw4 If not specified, ‘auto\_any’ is used. (Note that it may be easier to achieve the desired result for QSV by creating the platform-appropriate subdevice (‘dxva2’ or ‘d3d11va’ or ‘vaapi’) and then deriving a QSV device from that.) The following options are recognized: child\_device Specify a DRM render node on Linux or DirectX adapter on Windows. child\_device\_type Choose platform-appropriate subdevice type. On Windows ‘d3d11va’ is used as default subdevice type when `--enable-libvpl` is specified at configuration time, ‘dxva2’ is used as default subdevice type when `--enable-libmfx` is specified at configuration time. On Linux user can use ‘vaapi’ only as subdevice type. Examples: _\-init\_hw\_device qsv:hw,child\_device=/dev/dri/renderD129_ Create a QSV device with ‘MFX\_IMPL\_HARDWARE’ on DRM render node /dev/dri/renderD129. _\-init\_hw\_device qsv:hw,child\_device=1_ Create a QSV device with ‘MFX\_IMPL\_HARDWARE’ on DirectX adapter 1. _\-init\_hw\_device qsv:hw,child\_device\_type=d3d11va_ Choose the GPU subdevice with type ‘d3d11va’ and create QSV device with ‘MFX\_IMPL\_HARDWARE’. _\-init\_hw\_device qsv:hw,child\_device\_type=dxva2_ Choose the GPU subdevice with type ‘dxva2’ and create QSV device with ‘MFX\_IMPL\_HARDWARE’. _\-init\_hw\_device qsv:hw,child\_device=1,child\_device\_type=d3d11va_ Create a QSV device with ‘MFX\_IMPL\_HARDWARE’ on DirectX adapter 1 with subdevice type ‘d3d11va’. _\-init\_hw\_device vaapi=va:/dev/dri/renderD129 -init\_hw\_device qsv=hw1@va_ Create a VAAPI device called ‘va’ on /dev/dri/renderD129, then derive a QSV device called ‘hw1’ from device ‘va’. opencl device selects the platform and device as _platform\_index.device\_index_. The set of devices can also be filtered using the key-value pairs to find only devices matching particular platform or device strings. The strings usable as filters are: platform\_profile platform\_version platform\_name platform\_vendor platform\_extensions device\_name device\_vendor driver\_version device\_version device\_profile device\_extensions device\_type The indices and filters must together uniquely select a device. Examples: _\-init\_hw\_device opencl:0.1_ Choose the second device on the first platform. _\-init\_hw\_device opencl:,device\_name=Foo9000_ Choose the device with a name containing the string _Foo9000_. _\-init\_hw\_device opencl:1,device\_type=gpu,device\_extensions=cl\_khr\_fp16_ Choose the GPU device on the second platform supporting the _cl\_khr\_fp16_ extension. vulkan If device is an integer, it selects the device by its index in a system-dependent list of devices. If device is any other string, it selects the first device with a name containing that string as a substring. The following options are recognized: debug If set to 1, enables the validation layer, if installed. linear\_images If set to 1, images allocated by the hwcontext will be linear and locally mappable. instance\_extensions A plus separated list of additional instance extensions to enable. device\_extensions A plus separated list of additional device extensions to enable. Examples: _\-init\_hw\_device vulkan:1_ Choose the second device on the system. _\-init\_hw\_device vulkan:RADV_ Choose the first device with a name containing the string _RADV_. _\-init\_hw\_device vulkan:0,instance\_extensions=VK\_KHR\_wayland\_surface+VK\_KHR\_xcb\_surface_ Choose the first device and enable the Wayland and XCB instance extensions. \-init\_hw\_device type\[=name\]@source Initialise a new hardware device of type type called name, deriving it from the existing device with the name source. \-init\_hw\_device list List all hardware device types supported in this build of ffmpeg. \-filter\_hw\_device name Pass the hardware device called name to all filters in any filter graph. This can be used to set the device to upload to with the `hwupload` filter, or the device to map to with the `hwmap` filter. Other filters may also make use of this parameter when they require a hardware device. Note that this is typically only required when the input is not already in hardware frames - when it is, filters will derive the device they require from the context of the frames they receive as input. This is a global setting, so all filters will receive the same device. \-hwaccel\[:stream\_specifier\] hwaccel (_input,per-stream_) Use hardware acceleration to decode the matching stream(s). The allowed values of hwaccel are: none Do not use any hardware acceleration (the default). auto Automatically select the hardware acceleration method. vdpau Use VDPAU (Video Decode and Presentation API for Unix) hardware acceleration. dxva2 Use DXVA2 (DirectX Video Acceleration) hardware acceleration. d3d11va Use D3D11VA (DirectX Video Acceleration) hardware acceleration. vaapi Use VAAPI (Video Acceleration API) hardware acceleration. qsv Use the Intel QuickSync Video acceleration for video transcoding. Unlike most other values, this option does not enable accelerated decoding (that is used automatically whenever a qsv decoder is selected), but accelerated transcoding, without copying the frames into the system memory. For it to work, both the decoder and the encoder must support QSV acceleration and no filters must be used. videotoolbox Use Video Toolbox hardware acceleration. This option has no effect if the selected hwaccel is not available or not supported by the chosen decoder. Note that most acceleration methods are intended for playback and will not be faster than software decoding on modern CPUs. Additionally, `ffmpeg` will usually need to copy the decoded frames from the GPU memory into the system memory, resulting in further performance loss. This option is thus mainly useful for testing. \-hwaccel\_device\[:stream\_specifier\] hwaccel\_device (_input,per-stream_) Select a device to use for hardware acceleration. This option only makes sense when the \-hwaccel option is also specified. It can either refer to an existing device created with \-init\_hw\_device by name, or it can create a new device as if ‘\-init\_hw\_device’ type:hwaccel\_device were called immediately before. \-hwaccels List all hardware acceleration components enabled in this build of ffmpeg. Actual runtime availability depends on the hardware and its suitable driver being installed. \-fix\_sub\_duration\_heartbeat\[:stream\_specifier\] Set a specific output video stream as the heartbeat stream according to which to split and push through currently in-progress subtitle upon receipt of a random access packet. This lowers the latency of subtitles for which the end packet or the following subtitle has not yet been received. As a drawback, this will most likely lead to duplication of subtitle events in order to cover the full duration, so when dealing with use cases where latency of when the subtitle event is passed on to output is not relevant this option should not be utilized. Requires \-fix\_sub\_duration to be set for the relevant input subtitle stream for this to have any effect, as well as for the input subtitle stream having to be directly mapped to the same output in which the heartbeat stream resides. ### 5.7 Audio Options \-aframes number (_output_) Set the number of audio frames to output. This is an obsolete alias for `-frames:a`, which you should use instead. \-ar\[:stream\_specifier\] freq (_input/output,per-stream_) Set the audio sampling frequency. For output streams it is set by default to the frequency of the corresponding input stream. For input streams this option only makes sense for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer options. \-aq q (_output_) Set the audio quality (codec-specific, VBR). This is an alias for -q:a. \-ac\[:stream\_specifier\] channels (_input/output,per-stream_) Set the number of audio channels. For output streams it is set by default to the number of input audio channels. For input streams this option only makes sense for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer options. \-an (_input/output_) As an input option, blocks all audio streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables audio recording i.e. automatic selection or mapping of any audio stream. For full manual control see the `-map` option. \-acodec codec (_input/output_) Set the audio codec. This is an alias for `-codec:a`. \-sample\_fmt\[:stream\_specifier\] sample\_fmt (_output,per-stream_) Set the audio sample format. Use `-sample_fmts` to get a list of supported sample formats. \-af filtergraph (_output_) Create the filtergraph specified by filtergraph and use it to filter the stream. This is an alias for `-filter:a`, see the \-filter option. ### 5.8 Advanced Audio options \-atag fourcc/tag (_output_) Force audio tag/fourcc. This is an alias for `-tag:a`. \-ch\_layout\[:stream\_specifier\] layout (_input/output,per-stream_) Alias for `-channel_layout`. \-channel\_layout\[:stream\_specifier\] layout (_input/output,per-stream_) Set the audio channel layout. For output streams it is set by default to the input channel layout. For input streams it overrides the channel layout of the input. Not all decoders respect the overridden channel layout. This option also sets the channel layout for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer option. \-guess\_layout\_max channels (_input,per-stream_) If some input channel layout is not known, try to guess only if it corresponds to at most the specified number of channels. For example, 2 tells to `ffmpeg` to recognize 1 channel as mono and 2 channels as stereo but not 6 channels as 5.1. The default is to always try to guess. Use 0 to disable all guessing. Using the `-channel_layout` option to explicitly specify an input layout also disables guessing. ### 5.9 Subtitle options \-scodec codec (_input/output_) Set the subtitle codec. This is an alias for `-codec:s`. \-sn (_input/output_) As an input option, blocks all subtitle streams of a file from being filtered or being automatically selected or mapped for any output. See `-discard` option to disable streams individually. As an output option, disables subtitle recording i.e. automatic selection or mapping of any subtitle stream. For full manual control see the `-map` option. ### 5.10 Advanced Subtitle options \-fix\_sub\_duration Fix subtitles durations. For each subtitle, wait for the next packet in the same stream and adjust the duration of the first to avoid overlap. This is necessary with some subtitles codecs, especially DVB subtitles, because the duration in the original packet is only a rough estimate and the end is actually marked by an empty subtitle frame. Failing to use this option when necessary can result in exaggerated durations or muxing failures due to non-monotonic timestamps. Note that this option will delay the output of all data until the next subtitle packet is decoded: it may increase memory consumption and latency a lot. \-canvas\_size size Set the size of the canvas used to render subtitles. ### 5.11 Advanced options \-map \[-\]input\_file\_id\[:stream\_specifier\]\[:view\_specifier\]\[:?\] | \[linklabel\] (_output_) Create one or more streams in the output file. This option has two forms for specifying the data source(s): the first selects one or more streams from some input file (specified with `-i`), the second takes an output from some complex filtergraph (specified with `-filter_complex`). In the first form, an output stream is created for every stream from the input file with the index input\_file\_id. If stream\_specifier is given, only those streams that match the specifier are used (see the Stream specifiers section for the stream\_specifier syntax). A `-` character before the stream identifier creates a "negative" mapping. It disables matching streams from already created mappings. An optional view\_specifier may be given after the stream specifier, which for multiview video specifies the view to be used. The view specifier may have one of the following formats: view:view\_id select a view by its ID; view\_id may be set to ’all’ to use all the views interleaved into one stream; vidx:view\_idx select a view by its index; i.e. 0 is the base view, 1 is the first non-base view, etc. vpos:position select a view by its display position; position may be `left` or `right` The default for transcoding is to only use the base view, i.e. the equivalent of `vidx:0`. For streamcopy, view specifiers are not supported and all views are always copied. A trailing `?` after the stream index will allow the map to be optional: if the map matches no streams the map will be ignored instead of failing. Note the map will still fail if an invalid input file index is used; such as if the map refers to a non-existent input. An alternative \[linklabel\] form will map outputs from complex filter graphs (see the \-filter\_complex option) to the output file. linklabel must correspond to a defined output link label in the graph. This option may be specified multiple times, each adding more streams to the output file. Any given input stream may also be mapped any number of times as a source for different output streams, e.g. in order to use different encoding options and/or filters. The streams are created in the output in the same order in which the `-map` options are given on the commandline. Using this option disables the default mappings for this output file. Examples: _map everything_ To map ALL streams from the first input file to output ffmpeg -i INPUT -map 0 output _select specific stream_ If you have two audio streams in the first input file, these streams are identified by 0:0 and 0:1. You can use `-map` to select which streams to place in an output file. For example: ffmpeg -i INPUT -map 0:1 out.wav will map the second input stream in INPUT to the (single) output stream in out.wav. _create multiple streams_ To select the stream with index 2 from input file a.mov (specified by the identifier 0:2), and stream with index 6 from input b.mov (specified by the identifier 1:6), and copy them to the output file out.mov: ffmpeg -i a.mov -i b.mov -c copy -map 0:2 -map 1:6 out.mov _create multiple streams 2_ To select all video and the third audio stream from an input file: ffmpeg -i INPUT -map 0:v -map 0:a:2 OUTPUT _negative map_ To map all the streams except the second audio, use negative mappings ffmpeg -i INPUT -map 0 -map -0:a:1 OUTPUT _optional map_ To map the video and audio streams from the first input, and using the trailing `?`, ignore the audio mapping if no audio streams exist in the first input: ffmpeg -i INPUT -map 0:v -map 0:a? OUTPUT _map by language_ To pick the English audio stream: ffmpeg -i INPUT -map 0:m:language:eng OUTPUT \-ignore\_unknown Ignore input streams with unknown type instead of failing if copying such streams is attempted. \-copy\_unknown Allow input streams with unknown type to be copied instead of failing if copying such streams is attempted. \-map\_metadata\[:metadata\_spec\_out\] infile\[:metadata\_spec\_in\] (_output,per-metadata_) Set metadata information of the next output file from infile. Note that those are file indices (zero-based), not filenames. Optional metadata\_spec\_in/out parameters specify, which metadata to copy. A metadata specifier can have the following forms: g global metadata, i.e. metadata that applies to the whole file s\[:stream\_spec\] per-stream metadata. stream\_spec is a stream specifier as described in the Stream specifiers chapter. In an input metadata specifier, the first matching stream is copied from. In an output metadata specifier, all matching streams are copied to. c:chapter\_index per-chapter metadata. chapter\_index is the zero-based chapter index. p:program\_index per-program metadata. program\_index is the zero-based program index. If metadata specifier is omitted, it defaults to global. By default, global metadata is copied from the first input file, per-stream and per-chapter metadata is copied along with streams/chapters. These default mappings are disabled by creating any mapping of the relevant type. A negative file index can be used to create a dummy mapping that just disables automatic copying. For example to copy metadata from the first stream of the input file to global metadata of the output file: ffmpeg -i in.ogg -map\_metadata 0:s:0 out.mp3 To do the reverse, i.e. copy global metadata to all audio streams: ffmpeg -i in.mkv -map\_metadata:s:a 0:g out.mkv Note that simple `0` would work as well in this example, since global metadata is assumed by default. \-map\_chapters input\_file\_index (_output_) Copy chapters from input file with index input\_file\_index to the next output file. If no chapter mapping is specified, then chapters are copied from the first input file with at least one chapter. Use a negative file index to disable any chapter copying. \-benchmark (_global_) Show benchmarking information at the end of an encode. Shows real, system and user time used and maximum memory consumption. Maximum memory consumption is not supported on all systems, it will usually display as 0 if not supported. \-benchmark\_all (_global_) Show benchmarking information during the encode. Shows real, system and user time used in various steps (audio/video encode/decode). \-timelimit duration (_global_) Exit after ffmpeg has been running for duration seconds in CPU user time. \-dump (_global_) Dump each input packet to stderr. \-hex (_global_) When dumping packets, also dump the payload. \-readrate speed (_input_) Limit input read speed. Its value is a floating-point positive number which represents the maximum duration of media, in seconds, that should be ingested in one second of wallclock time. Default value is zero and represents no imposed limitation on speed of ingestion. Value `1` represents real-time speed and is equivalent to `-re`. Mainly used to simulate a capture device or live input stream (e.g. when reading from a file). Should not be used with a low value when input is an actual capture device or live stream as it may cause packet loss. It is useful for when flow speed of output packets is important, such as live streaming. \-re (_input_) Read input at native frame rate. This is equivalent to setting `-readrate 1`. \-readrate\_initial\_burst seconds Set an initial read burst time, in seconds, after which \-re/-readrate will be enforced. \-readrate\_catchup speed (_input_) If either the input or output is blocked leading to actual read speed falling behind the specified readrate, then this rate takes effect till the input catches up with the specified readrate. Must not be lower than the primary readrate. \-vsync parameter (_global_) \-fps\_mode\[:stream\_specifier\] parameter (_output,per-stream_) Set video sync method / framerate mode. vsync is applied to all output video streams but can be overridden for a stream by setting fps\_mode. vsync is deprecated and will be removed in the future. For compatibility reasons some of the values for vsync can be specified as numbers (shown in parentheses in the following table). passthrough (0) Each frame is passed with its timestamp from the demuxer to the muxer. cfr (1) Frames will be duplicated and dropped to achieve exactly the requested constant frame rate. vfr (2) Frames are passed through with their timestamp or dropped so as to prevent 2 frames from having the same timestamp. auto (-1) Chooses between cfr and vfr depending on muxer capabilities. This is the default method. Note that the timestamps may be further modified by the muxer, after this. For example, in the case that the format option avoid\_negative\_ts is enabled. With -map you can select from which stream the timestamps should be taken. You can leave either video or audio unchanged and sync the remaining stream(s) to the unchanged one. \-frame\_drop\_threshold parameter Frame drop threshold, which specifies how much behind video frames can be before they are dropped. In frame rate units, so 1.0 is one frame. The default is -1.1. One possible usecase is to avoid framedrops in case of noisy timestamps or to increase frame drop precision in case of exact timestamps. \-apad parameters (_output,per-stream_) Pad the output audio stream(s). This is the same as applying `-af apad`. Argument is a string of filter parameters composed the same as with the `apad` filter. `-shortest` must be set for this output for the option to take effect. \-copyts Do not process input timestamps, but keep their values without trying to sanitize them. In particular, do not remove the initial start time offset value. Note that, depending on the vsync option or on specific muxer processing (e.g. in case the format option avoid\_negative\_ts is enabled) the output timestamps may mismatch with the input timestamps even when this option is selected. \-start\_at\_zero When used with copyts, shift input timestamps so they start at zero. This means that using e.g. `-ss 50` will make output timestamps start at 50 seconds, regardless of what timestamp the input file started at. \-copytb mode Specify how to set the encoder timebase when stream copying. mode is an integer numeric value, and can assume one of the following values: 1 Use the demuxer timebase. The time base is copied to the output encoder from the corresponding input demuxer. This is sometimes required to avoid non monotonically increasing timestamps when copying video streams with variable frame rate. 0 Use the decoder timebase. The time base is copied to the output encoder from the corresponding input decoder. \-1 Try to make the choice automatically, in order to generate a sane output. Default value is -1. \-enc\_time\_base\[:stream\_specifier\] timebase (_output,per-stream_) Set the encoder timebase. timebase can assume one of the following values: 0 Assign a default value according to the media type. For video - use 1/framerate, for audio - use 1/samplerate. demux Use the timebase from the demuxer. filter Use the timebase from the filtergraph. a positive number Use the provided number as the timebase. This field can be provided as a ratio of two integers (e.g. 1:24, 1:48000) or as a decimal number (e.g. 0.04166, 2.0833e-5) Default value is 0. \-bitexact (_input/output_) Enable bitexact mode for (de)muxer and (de/en)coder \-shortest (_output_) Finish encoding when the shortest output stream ends. Note that this option may require buffering frames, which introduces extra latency. The maximum amount of this latency may be controlled with the `-shortest_buf_duration` option. \-shortest\_buf\_duration duration (_output_) The `-shortest` option may require buffering potentially large amounts of data when at least one of the streams is "sparse" (i.e. has large gaps between frames – this is typically the case for subtitles). This option controls the maximum duration of buffered frames in seconds. Larger values may allow the `-shortest` option to produce more accurate results, but increase memory use and latency. The default value is 10 seconds. \-dts\_delta\_threshold threshold Timestamp discontinuity delta threshold, expressed as a decimal number of seconds. The timestamp discontinuity correction enabled by this option is only applied to input formats accepting timestamp discontinuity (for which the `AVFMT_TS_DISCONT` flag is enabled), e.g. MPEG-TS and HLS, and is automatically disabled when employing the `-copyts` option (unless wrapping is detected). If a timestamp discontinuity is detected whose absolute value is greater than threshold, ffmpeg will remove the discontinuity by decreasing/increasing the current DTS and PTS by the corresponding delta value. The default value is 10. \-dts\_error\_threshold threshold Timestamp error delta threshold, expressed as a decimal number of seconds. The timestamp correction enabled by this option is only applied to input formats not accepting timestamp discontinuity (for which the `AVFMT_TS_DISCONT` flag is not enabled). If a timestamp discontinuity is detected whose absolute value is greater than threshold, ffmpeg will drop the PTS/DTS timestamp value. The default value is `3600*30` (30 hours), which is arbitrarily picked and quite conservative. \-muxdelay seconds (_output_) Set the maximum demux-decode delay. \-muxpreload seconds (_output_) Set the initial demux-decode delay. \-streamid output-stream-index:new-value (_output_) Assign a new stream-id value to an output stream. This option should be specified prior to the output filename to which it applies. For the situation where multiple output files exist, a streamid may be reassigned to a different value. For example, to set the stream 0 PID to 33 and the stream 1 PID to 36 for an output mpegts file: ffmpeg -i inurl -streamid 0:33 -streamid 1:36 out.ts \-bsf\[:stream\_specifier\] bitstream\_filters (_input/output,per-stream_) Apply bitstream filters to matching streams. The filters are applied to each packet as it is received from the demuxer (when used as an input option) or before it is sent to the muxer (when used as an output option). bitstream\_filters is a comma-separated list of bitstream filter specifications, each of the form filter\[=optname0\=optval0:optname1\=optval1:...\] Any of the ’,=:’ characters that are to be a part of an option value need to be escaped with a backslash. Use the `-bsfs` option to get the list of bitstream filters. E.g. ffmpeg -bsf:v h264\_mp4toannexb -i h264.mp4 -c:v copy -an out.h264 applies the `h264_mp4toannexb` bitstream filter (which converts MP4-encapsulated H.264 stream to Annex B) to the _input_ video stream. On the other hand, ffmpeg -i file.mov -an -vn -bsf:s mov2textsub -c:s copy -f rawvideo sub.txt applies the `mov2textsub` bitstream filter (which extracts text from MOV subtitles) to the _output_ subtitle stream. Note, however, that since both examples use `-c copy`, it matters little whether the filters are applied on input or output - that would change if transcoding was happening. \-tag\[:stream\_specifier\] codec\_tag (_input/output,per-stream_) Force a tag/fourcc for matching streams. \-timecode hh:mm:ssSEPff Specify Timecode for writing. SEP is ’:’ for non drop timecode and ’;’ (or ’.’) for drop. ffmpeg -i input.mpg -timecode 01:02:03.04 -r 30000/1001 -s ntsc output.mpg \-filter\_complex filtergraph (_global_) Define a complex filtergraph, i.e. one with arbitrary number of inputs and/or outputs. For simple graphs – those with one input and one output of the same type – see the \-filter options. filtergraph is a description of the filtergraph, as described in the “Filtergraph syntax” section of the ffmpeg-filters manual. This option may be specified multiple times - each use creates a new complex filtergraph. Inputs to a complex filtergraph may come from different source types, distinguished by the format of the corresponding link label: * To connect an input stream, use `[file_index:stream_specifier]` (i.e. the same syntax as \-map). If stream\_specifier matches multiple streams, the first one will be used. For multiview video, the stream specifier may be followed by the view specifier, see documentation for the \-map option for its syntax. * To connect a loopback decoder use \[dec:dec\_idx\], where dec\_idx is the index of the loopback decoder to be connected to given input. For multiview video, the decoder index may be followed by the view specifier, see documentation for the \-map option for its syntax. * To connect an output from another complex filtergraph, use its link label. E.g the following example: ffmpeg -i input.mkv \\ -filter\_complex '\[0:v\]scale=size=hd1080,split=outputs=2\[for\_enc\]\[orig\_scaled\]' \\ -c:v libx264 -map '\[for\_enc\]' output.mkv \\ -dec 0:0 \\ -filter\_complex '\[dec:0\]\[orig\_scaled\]hstack\[stacked\]' \\ -map '\[stacked\]' -c:v ffv1 comparison.mkv reads an input video and * (line 2) uses a complex filtergraph with one input and two outputs to scale the video to 1920x1080 and duplicate the result to both outputs; * (line 3) encodes one scaled output with `libx264` and writes the result to output.mkv; * (line 4) decodes this encoded stream with a loopback decoder; * (line 5) places the output of the loopback decoder (i.e. the `libx264`\-encoded video) side by side with the scaled original input; * (line 6) combined video is then losslessly encoded and written into comparison.mkv. Note that the two filtergraphs cannot be combined into one, because then there would be a cycle in the transcoding pipeline (filtergraph output goes to encoding, from there to decoding, then back to the same graph), and such cycles are not allowed. An unlabeled input will be connected to the first unused input stream of the matching type. Output link labels are referred to with \-map. Unlabeled outputs are added to the first output file. Note that with this option it is possible to use only lavfi sources without normal input files. For example, to overlay an image over video ffmpeg -i video.mkv -i image.png -filter\_complex '\[0:v\]\[1:v\]overlay\[out\]' -map '\[out\]' out.mkv Here `[0:v]` refers to the first video stream in the first input file, which is linked to the first (main) input of the overlay filter. Similarly the first video stream in the second input is linked to the second (overlay) input of overlay. Assuming there is only one video stream in each input file, we can omit input labels, so the above is equivalent to ffmpeg -i video.mkv -i image.png -filter\_complex 'overlay\[out\]' -map '\[out\]' out.mkv Furthermore we can omit the output label and the single output from the filter graph will be added to the output file automatically, so we can simply write ffmpeg -i video.mkv -i image.png -filter\_complex 'overlay' out.mkv As a special exception, you can use a bitmap subtitle stream as input: it will be converted into a video with the same size as the largest video in the file, or 720x576 if no video is present. Note that this is an experimental and temporary solution. It will be removed once libavfilter has proper support for subtitles. For example, to hardcode subtitles on top of a DVB-T recording stored in MPEG-TS format, delaying the subtitles by 1 second: ffmpeg -i input.ts -filter\_complex \\ '\[#0x2ef\] setpts=PTS+1/TB \[sub\] ; \[#0x2d0\] \[sub\] overlay' \\ -sn -map '#0x2dc' output.mkv (0x2d0, 0x2dc and 0x2ef are the MPEG-TS PIDs of respectively the video, audio and subtitles streams; 0:0, 0:3 and 0:7 would have worked too) To generate 5 seconds of pure red video using lavfi `color` source: ffmpeg -filter\_complex 'color=c=red' -t 5 out.mkv \-filter\_complex\_threads nb\_threads (_global_) Defines how many threads are used to process a filter\_complex graph. Similar to filter\_threads but used for `-filter_complex` graphs only. The default is the number of available CPUs. \-lavfi filtergraph (_global_) Define a complex filtergraph, i.e. one with arbitrary number of inputs and/or outputs. Equivalent to \-filter\_complex. \-accurate\_seek (_input_) This option enables or disables accurate seeking in input files with the \-ss option. It is enabled by default, so seeking is accurate when transcoding. Use \-noaccurate\_seek to disable it, which may be useful e.g. when copying some streams and transcoding the others. \-seek\_timestamp (_input_) This option enables or disables seeking by timestamp in input files with the \-ss option. It is disabled by default. If enabled, the argument to the \-ss option is considered an actual timestamp, and is not offset by the start time of the file. This matters only for files which do not start from timestamp 0, such as transport streams. \-thread\_queue\_size size (_input/output_) For input, this option sets the maximum number of queued packets when reading from the file or device. With low latency / high rate live streams, packets may be discarded if they are not read in a timely manner; setting this value can force ffmpeg to use a separate input thread and read packets as soon as they arrive. By default ffmpeg only does this if multiple inputs are specified. For output, this option specified the maximum number of packets that may be queued to each muxing thread. \-sdp\_file file (_global_) Print sdp information for an output stream to file. This allows dumping sdp information when at least one output isn’t an rtp stream. (Requires at least one of the output formats to be rtp). \-discard (_input_) Allows discarding specific streams or frames from streams. Any input stream can be fully discarded, using value `all` whereas selective discarding of frames from a stream occurs at the demuxer and is not supported by all demuxers. none Discard no frame. default Default, which discards no frames. noref Discard all non-reference frames. bidir Discard all bidirectional frames. nokey Discard all frames excepts keyframes. all Discard all frames. \-abort\_on flags (_global_) Stop and abort on various conditions. The following flags are available: empty\_output No packets were passed to the muxer, the output is empty. empty\_output\_stream No packets were passed to the muxer in some of the output streams. \-max\_error\_rate (_global_) Set fraction of decoding frame failures across all inputs which when crossed ffmpeg will return exit code 69. Crossing this threshold does not terminate processing. Range is a floating-point number between 0 to 1. Default is 2/3. \-xerror (_global_) Stop and exit on error \-max\_muxing\_queue\_size packets (_output,per-stream_) When transcoding audio and/or video streams, ffmpeg will not begin writing into the output until it has one packet for each such stream. While waiting for that to happen, packets for other streams are buffered. This option sets the size of this buffer, in packets, for the matching output stream. The default value of this option should be high enough for most uses, so only touch this option if you are sure that you need it. \-muxing\_queue\_data\_threshold bytes (_output,per-stream_) This is a minimum threshold until which the muxing queue size is not taken into account. Defaults to 50 megabytes per stream, and is based on the overall size of packets passed to the muxer. \-auto\_conversion\_filters (_global_) Enable automatically inserting format conversion filters in all filter graphs, including those defined by \-vf, \-af, \-filter\_complex and \-lavfi. If filter format negotiation requires a conversion, the initialization of the filters will fail. Conversions can still be performed by inserting the relevant conversion filter (scale, aresample) in the graph. On by default, to explicitly disable it you need to specify `-noauto_conversion_filters`. \-bits\_per\_raw\_sample\[:stream\_specifier\] value (_output,per-stream_) Declare the number of bits per raw sample in the given output stream to be value. Note that this option sets the information provided to the encoder/muxer, it does not change the stream to conform to this value. Setting values that do not match the stream properties may result in encoding failures or invalid output files. \-stats\_enc\_pre\[:stream\_specifier\] path (_output,per-stream_) \-stats\_enc\_post\[:stream\_specifier\] path (_output,per-stream_) \-stats\_mux\_pre\[:stream\_specifier\] path (_output,per-stream_) Write per-frame encoding information about the matching streams into the file given by path. \-stats\_enc\_pre writes information about raw video or audio frames right before they are sent for encoding, while \-stats\_enc\_post writes information about encoded packets as they are received from the encoder. \-stats\_mux\_pre writes information about packets just as they are about to be sent to the muxer. Every frame or packet produces one line in the specified file. The format of this line is controlled by \-stats\_enc\_pre\_fmt / \-stats\_enc\_post\_fmt / \-stats\_mux\_pre\_fmt. When stats for multiple streams are written into a single file, the lines corresponding to different streams will be interleaved. The precise order of this interleaving is not specified and not guaranteed to remain stable between different invocations of the program, even with the same options. \-stats\_enc\_pre\_fmt\[:stream\_specifier\] format\_spec (_output,per-stream_) \-stats\_enc\_post\_fmt\[:stream\_specifier\] format\_spec (_output,per-stream_) \-stats\_mux\_pre\_fmt\[:stream\_specifier\] format\_spec (_output,per-stream_) Specify the format for the lines written with \-stats\_enc\_pre / \-stats\_enc\_post / \-stats\_mux\_pre. format\_spec is a string that may contain directives of the form {fmt}. format\_spec is backslash-escaped — use \\{, \\}, and \\\\ to write a literal {, }, or \\, respectively, into the output. The directives given with fmt may be one of the following: fidx Index of the output file. sidx Index of the output stream in the file. n Frame number. Pre-encoding: number of frames sent to the encoder so far. Post-encoding: number of packets received from the encoder so far. Muxing: number of packets submitted to the muxer for this stream so far. ni Input frame number. Index of the input frame (i.e. output by a decoder) that corresponds to this output frame or packet. -1 if unavailable. tb Timebase in which this frame/packet’s timestamps are expressed, as a rational number num/den. Note that encoder and muxer may use different timebases. tbi Timebase for ptsi, as a rational number num/den. Available when ptsi is available, 0/1 otherwise. pts Presentation timestamp of the frame or packet, as an integer. Should be multiplied by the timebase to compute presentation time. ptsi Presentation timestamp of the input frame (see ni), as an integer. Should be multiplied by tbi to compute presentation time. Printed as (2^63 - 1 = 9223372036854775807) when not available. t Presentation time of the frame or packet, as a decimal number. Equal to pts multiplied by tb. ti Presentation time of the input frame (see ni), as a decimal number. Equal to ptsi multiplied by tbi. Printed as inf when not available. dts (_packet_) Decoding timestamp of the packet, as an integer. Should be multiplied by the timebase to compute presentation time. dt (_packet_) Decoding time of the frame or packet, as a decimal number. Equal to dts multiplied by tb. sn (_frame,audio_) Number of audio samples sent to the encoder so far. samp (_frame,audio_) Number of audio samples in the frame. size (_packet_) Size of the encoded packet in bytes. br (_packet_) Current bitrate in bits per second. abr (_packet_) Average bitrate for the whole stream so far, in bits per second, -1 if it cannot be determined at this point. key (_packet_) Character ’K’ if the packet contains a keyframe, character ’N’ otherwise. Directives tagged with _packet_ may only be used with \-stats\_enc\_post\_fmt and \-stats\_mux\_pre\_fmt. Directives tagged with _frame_ may only be used with \-stats\_enc\_pre\_fmt. Directives tagged with _audio_ may only be used with audio streams. The default format strings are: pre-encoding {fidx} {sidx} {n} {t} post-encoding {fidx} {sidx} {n} {t} In the future, new items may be added to the end of the default formatting strings. Users who depend on the format staying exactly the same, should prescribe it manually. Note that stats for different streams written into the same file may have different formats. ### 5.12 Preset files A preset file contains a sequence of option\=value pairs, one for each line, specifying a sequence of options which would be awkward to specify on the command line. Lines starting with the hash (’#’) character are ignored and are used to provide comments. Check the presets directory in the FFmpeg source tree for examples. There are two types of preset files: ffpreset and avpreset files. #### 5.12.1 ffpreset files ffpreset files are specified with the `vpre`, `apre`, `spre`, and `fpre` options. The `fpre` option takes the filename of the preset instead of a preset name as input and can be used for any kind of codec. For the `vpre`, `apre`, and `spre` options, the options specified in a preset file are applied to the currently selected codec of the same type as the preset option. The argument passed to the `vpre`, `apre`, and `spre` preset options identifies the preset file to use according to the following rules: First ffmpeg searches for a file named arg.ffpreset in the directories $FFMPEG\_DATADIR (if set), and $HOME/.ffmpeg, and in the datadir defined at configuration time (usually PREFIX/share/ffmpeg) or in a ffpresets folder along the executable on win32, in that order. For example, if the argument is `libvpx-1080p`, it will search for the file libvpx-1080p.ffpreset. If no such file is found, then ffmpeg will search for a file named codec\_name\-arg.ffpreset in the above-mentioned directories, where codec\_name is the name of the codec to which the preset file options will be applied. For example, if you select the video codec with `-vcodec libvpx` and use `-vpre 1080p`, then it will search for the file libvpx-1080p.ffpreset. #### 5.12.2 avpreset files avpreset files are specified with the `pre` option. They work similar to ffpreset files, but they only allow encoder- specific options. Therefore, an option\=value pair specifying an encoder cannot be used. When the `pre` option is specified, ffmpeg will look for files with the suffix .avpreset in the directories $AVCONV\_DATADIR (if set), and $HOME/.avconv, and in the datadir defined at configuration time (usually PREFIX/share/ffmpeg), in that order. First ffmpeg searches for a file named codec\_name\-arg.avpreset in the above-mentioned directories, where codec\_name is the name of the codec to which the preset file options will be applied. For example, if you select the video codec with `-vcodec libvpx` and use `-pre 1080p`, then it will search for the file libvpx-1080p.avpreset. If no such file is found, then ffmpeg will search for a file named arg.avpreset in the same directories. ### 5.13 vstats file format The `-vstats` and `-vstats_file` options enable generation of a file containing statistics about the generated video outputs. The `-vstats_version` option controls the format version of the generated file. With version `1` the format is: frame= FRAME q= FRAME\_QUALITY PSNR= PSNR f\_size= FRAME\_SIZE s\_size= STREAM\_SIZEkB time= TIMESTAMP br= BITRATEkbits/s avg\_br= AVERAGE\_BITRATEkbits/s With version `2` the format is: out= OUT\_FILE\_INDEX st= OUT\_FILE\_STREAM\_INDEX frame= FRAME\_NUMBER q= FRAME\_QUALITYf PSNR= PSNR f\_size= FRAME\_SIZE s\_size= STREAM\_SIZEkB time= TIMESTAMP br= BITRATEkbits/s avg\_br= AVERAGE\_BITRATEkbits/s The value corresponding to each key is described below: avg\_br average bitrate expressed in Kbits/s br bitrate expressed in Kbits/s frame number of encoded frame out out file index PSNR Peak Signal to Noise Ratio q quality of the frame f\_size encoded packet size expressed as number of bytes s\_size stream size expressed in KiB st out file stream index time time of the packet type picture type See also the \-stats\_enc options for an alternative way to show encoding statistics. ## 6 Examples ### 6.1 Video and Audio grabbing If you specify the input format and device then ffmpeg can grab video and audio directly. ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg Or with an ALSA audio source (mono input, card id 1) instead of OSS: ffmpeg -f alsa -ac 1 -i hw:1 -f video4linux2 -i /dev/video0 /tmp/out.mpg Note that you must activate the right video source and channel before launching ffmpeg with any TV viewer such as xawtv by Gerd Knorr. You also have to set the audio recording levels correctly with a standard mixer. ### 6.2 X11 grabbing Grab the X11 display with ffmpeg via ffmpeg -f x11grab -video\_size cif -framerate 25 -i :0.0 /tmp/out.mpg 0.0 is display.screen number of your X11 server, same as the DISPLAY environment variable. ffmpeg -f x11grab -video\_size cif -framerate 25 -i :0.0+10,20 /tmp/out.mpg 0.0 is display.screen number of your X11 server, same as the DISPLAY environment variable. 10 is the x-offset and 20 the y-offset for the grabbing. ### 6.3 Video and Audio file format conversion Any supported file format and protocol can serve as input to ffmpeg: Examples: * You can use YUV files as input: ffmpeg -i /tmp/test%d.Y /tmp/out.mpg It will use the files: /tmp/test0.Y, /tmp/test0.U, /tmp/test0.V, /tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc... The Y files use twice the resolution of the U and V files. They are raw files, without header. They can be generated by all decent video decoders. You must specify the size of the image with the \-s option if ffmpeg cannot guess it. * You can input from a raw YUV420P file: ffmpeg -i /tmp/test.yuv /tmp/out.avi test.yuv is a file containing raw YUV planar data. Each frame is composed of the Y plane followed by the U and V planes at half vertical and horizontal resolution. * You can output to a raw YUV420P file: ffmpeg -i mydivx.avi hugefile.yuv * You can set several input files and output files: ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg Converts the audio file a.wav and the raw YUV video file a.yuv to MPEG file a.mpg. * You can also do audio and video conversions at the same time: ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2 Converts a.wav to MPEG audio at 22050 Hz sample rate. * You can encode to several formats at the same time and define a mapping from input stream to output streams: ffmpeg -i /tmp/a.wav -map 0:a -b:a 64k /tmp/a.mp2 -map 0:a -b:a 128k /tmp/b.mp2 Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. ’-map file:index’ specifies which input stream is used for each output stream, in the order of the definition of output streams. * You can transcode decrypted VOBs: ffmpeg -i snatch\_1.vob -f avi -c:v mpeg4 -b:v 800k -g 300 -bf 2 -c:a libmp3lame -b:a 128k snatch.avi This is a typical DVD ripping example; the input is a VOB file, the output an AVI file with MPEG-4 video and MP3 audio. Note that in this command we use B-frames so the MPEG-4 stream is DivX5 compatible, and GOP size is 300 which means one intra frame every 10 seconds for 29.97fps input video. Furthermore, the audio stream is MP3-encoded so you need to enable LAME support by passing `--enable-libmp3lame` to configure. The mapping is particularly useful for DVD transcoding to get the desired audio language. NOTE: To see the supported input formats, use `ffmpeg -demuxers`. * You can extract images from a video, or create a video from many images: For extracting images from a video: ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg This will extract one video frame per second from the video and will output them in files named foo-001.jpeg, foo-002.jpeg, etc. Images will be rescaled to fit the new WxH values. If you want to extract just a limited number of frames, you can use the above command in combination with the `-frames:v` or `-t` option, or in combination with -ss to start extracting from a certain point in time. For creating a video from many images: ffmpeg -f image2 -framerate 12 -i foo-%03d.jpeg -s WxH foo.avi The syntax `foo-%03d.jpeg` specifies to use a decimal number composed of three digits padded with zeroes to express the sequence number. It is the same syntax supported by the C printf function, but only formats accepting a normal integer are suitable. When importing an image sequence, -i also supports expanding shell-like wildcard patterns (globbing) internally, by selecting the image2-specific `-pattern_type glob` option. For example, for creating a video from filenames matching the glob pattern `foo-*.jpeg`: ffmpeg -f image2 -pattern\_type glob -framerate 12 -i 'foo-\*.jpeg' -s WxH foo.avi * You can put many streams of the same type in the output: ffmpeg -i test1.avi -i test2.avi -map 1:1 -map 1:0 -map 0:1 -map 0:0 -c copy -y test12.nut The resulting output file test12.nut will contain the first four streams from the input files in reverse order. * To force CBR video output: ffmpeg -i myfile.avi -b 4000k -minrate 4000k -maxrate 4000k -bufsize 1835k out.m2v * The four options lmin, lmax, mblmin and mblmax use ’lambda’ units, but you may use the QP2LAMBDA constant to easily convert from ’q’ units: ffmpeg -i src.ext -lmax 21\*QP2LAMBDA dst.ext ## 7 See Also ffmpeg-all, ffplay, ffprobe, ffmpeg-utils, ffmpeg-scaler, ffmpeg-resampler, ffmpeg-codecs, ffmpeg-bitstream-filters, ffmpeg-formats, ffmpeg-devices, ffmpeg-protocols, ffmpeg-filters ## 8 Authors The FFmpeg developers. For details about the authorship, see the Git history of the project (https://git.ffmpeg.org/ffmpeg), e.g. by typing the command `git log` in the FFmpeg source directory, or browsing the online repository at https://git.ffmpeg.org/ffmpeg. Maintainers for the specific components are listed in the file MAINTAINERS in the source code tree. This document was generated on _April 7, 2025_ using _makeinfo_. Hosting provided by telepoint.bg